collabora-online/Makefile.am

430 lines
15 KiB
Makefile
Raw Normal View History

2018-10-30 11:13:35 +01:00
ETAGS=ctags -e
if ENABLE_MOBILEAPP
if ENABLE_GTKAPP
SUBDIRS = gtk loleaflet
else
if ENABLE_ANDROIDAPP
SUBDIRS = loleaflet android
else
SUBDIRS = loleaflet
endif
endif
else
SUBDIRS = . test loleaflet cypress_test
2015-10-21 12:01:47 +02:00
export ENABLE_DEBUG
bin_PROGRAMS = \
Add an initial libfuzzer based fuzzer - target ClientSession::_handleInput(), since crashing there would bring down the whole loolwsd (not just a kit process), and it deals with input from untrusted users (browsers) - add a --enable-fuzzers configure switch to build with -fsanitize=fuzzer (compared to normal sanitizers build, this is the only special flag needed) - configuring other sanitizers is not done automatically, either use --with-sanitizer=... or the environment variables from LODE's sanitizer config - run the actual fuzzer like this: ./clientsession_fuzzer -max_len=16384 fuzzer/data/ - note that at least openSUSE Leap 15.1 sadly ships with a clang with libfuzzer static libs removed from the package, so you need a self-built clang to run the fuzzer (either manual build or one from LODE) - <https://chromium.googlesource.com/chromium/src/testing/libfuzzer/+/refs/heads/master/efficient_fuzzing.md#execution-speed> suggests that "You should aim for at least 1,000 exec/s from your fuzz target locally" (i.e. one run should not take more than 1 ms), so try this minimal approach first. The alternative would be to start from the existing loolwsd_fuzzer binary, then step by step cut it down to not fork(), not do any network traffic, etc -- till it's fast enough that the fuzzer can find interesting input - the various configurations start to be really complex (the matrix is just very large), so try to use Util::isFuzzing() for fuzzer-specific changes (this is what core.git does as well), and only resort to ifdefs for the Util::isFuzzing() itself Change-Id: I72dc1193b34c93eacb5d8e39cef42387d42bd72f Reviewed-on: https://gerrit.libreoffice.org/c/online/+/89226 Tested-by: Jenkins CollaboraOffice <jenkinscollaboraoffice@gmail.com> Reviewed-by: Michael Meeks <michael.meeks@collabora.com>
2020-02-21 15:52:20 +01:00
loolforkit \
loolconvert loolconfig
2015-03-09 10:11:15 +01:00
Add an initial libfuzzer based fuzzer - target ClientSession::_handleInput(), since crashing there would bring down the whole loolwsd (not just a kit process), and it deals with input from untrusted users (browsers) - add a --enable-fuzzers configure switch to build with -fsanitize=fuzzer (compared to normal sanitizers build, this is the only special flag needed) - configuring other sanitizers is not done automatically, either use --with-sanitizer=... or the environment variables from LODE's sanitizer config - run the actual fuzzer like this: ./clientsession_fuzzer -max_len=16384 fuzzer/data/ - note that at least openSUSE Leap 15.1 sadly ships with a clang with libfuzzer static libs removed from the package, so you need a self-built clang to run the fuzzer (either manual build or one from LODE) - <https://chromium.googlesource.com/chromium/src/testing/libfuzzer/+/refs/heads/master/efficient_fuzzing.md#execution-speed> suggests that "You should aim for at least 1,000 exec/s from your fuzz target locally" (i.e. one run should not take more than 1 ms), so try this minimal approach first. The alternative would be to start from the existing loolwsd_fuzzer binary, then step by step cut it down to not fork(), not do any network traffic, etc -- till it's fast enough that the fuzzer can find interesting input - the various configurations start to be really complex (the matrix is just very large), so try to use Util::isFuzzing() for fuzzer-specific changes (this is what core.git does as well), and only resort to ifdefs for the Util::isFuzzing() itself Change-Id: I72dc1193b34c93eacb5d8e39cef42387d42bd72f Reviewed-on: https://gerrit.libreoffice.org/c/online/+/89226 Tested-by: Jenkins CollaboraOffice <jenkinscollaboraoffice@gmail.com> Reviewed-by: Michael Meeks <michael.meeks@collabora.com>
2020-02-21 15:52:20 +01:00
if ENABLE_LIBFUZZER
else
bin_PROGRAMS += loolwsd
endif
2016-04-14 14:43:13 +02:00
dist_bin_SCRIPTS = loolwsd-systemplate-setup
man_MANS = man/loolwsd.1 \
man/loolforkit.1 \
man/loolconvert.1 \
man/loolconfig.1 \
man/loolwsd-systemplate-setup.1
dist_doc_DATA = wsd/README \
wsd/README.vars \
wsd/protocol.txt \
wsd/reference.md \
wsd/metrics.txt
2016-04-14 14:43:13 +02:00
loolwsddatadir = @LOOLWSD_DATADIR@
2016-05-30 17:40:40 +02:00
loolwsddata_DATA = discovery.xml \
favicon.ico
2016-04-14 15:06:49 +02:00
loolwsdconfigdir = @LOOLWSD_CONFIGDIR@
loolwsdconfig_DATA = loolwsd.xml \
loolkitconfig.xcu
apache2configdir = ${sysconfdir}/apache2/conf-available
apache2config_DATA = etc/apache2/loolwsd.conf
nginxconfigdir = ${sysconfdir}/nginx/snippets
nginxconfig_DATA = etc/nginx/loolwsd.conf
2016-04-12 09:39:53 +02:00
ACLOCAL_AMFLAGS = -I m4
# quick and easy for now.
include_paths = -I${top_srcdir}/common -I${top_srcdir}/net -I${top_srcdir}/wsd -I${top_srcdir}/kit ${ZLIB_CFLAGS}
AM_CPPFLAGS = -pthread -DLOOLWSD_DATADIR='"@LOOLWSD_DATADIR@"' \
-DLOOLWSD_CONFIGDIR='"@LOOLWSD_CONFIGDIR@"' \
-DDEBUG_ABSSRCDIR='"@abs_srcdir@"' \
${include_paths}
if !ENABLE_DEBUG
AM_CPPFLAGS += -DNDEBUG
endif
AM_LDFLAGS = -pthread -Wl,-E,-rpath,/snap/loolwsd/current/usr/lib -lpam $(ZLIB_LIBS)
if ENABLE_SSL
AM_LDFLAGS += -lssl -lcrypto
else
loolwsd_fuzzer_LDADD = -lssl -lcrypto
loolwsd_LDADD = -lssl -lcrypto
loolconfig_LDADD = -lssl -lcrypto
endif
loolwsd_fuzzer_CPPFLAGS = -DKIT_IN_PROCESS=1 -DFUZZER=1 -DTDOC=\"$(abs_top_srcdir)/test/data\" $(AM_CPPFLAGS)
AM_ETAGSFLAGS = --c++-kinds=+p --fields=+iaS --extra=+q -R --totals=yes --exclude=loleaflet *
AM_CTAGSFLAGS = $(AM_ETAGSFLAGS)
shared_sources = common/FileUtil.cpp \
common/IoUtil.cpp \
common/Log.cpp \
common/Protocol.cpp \
common/StringVector.cpp \
common/Session.cpp \
common/Seccomp.cpp \
common/MessageQueue.cpp \
common/SigUtil.cpp \
common/SpookyV2.cpp \
common/Unit.cpp \
common/Util.cpp \
common/Authorization.cpp \
2017-03-23 18:14:51 +01:00
net/DelaySocket.cpp \
net/Socket.cpp
if ENABLE_SSL
shared_sources += net/Ssl.cpp
endif
loolwsd_sources = common/Crypto.cpp \
wsd/Admin.cpp \
wsd/AdminModel.cpp \
wsd/Auth.cpp \
wsd/DocumentBroker.cpp \
wsd/LOOLWSD.cpp \
wsd/ClientSession.cpp \
wsd/FileServer.cpp \
wsd/Storage.cpp \
wsd/TileCache.cpp \
wsd/ProofKey.cpp
loolwsd_SOURCES = $(loolwsd_sources) \
$(shared_sources)
2017-02-14 23:57:03 +01:00
noinst_PROGRAMS = clientnb \
connect \
lokitclient \
loolmap \
loolstress \
loolmount \
loolsocketdump
Add an initial libfuzzer based fuzzer - target ClientSession::_handleInput(), since crashing there would bring down the whole loolwsd (not just a kit process), and it deals with input from untrusted users (browsers) - add a --enable-fuzzers configure switch to build with -fsanitize=fuzzer (compared to normal sanitizers build, this is the only special flag needed) - configuring other sanitizers is not done automatically, either use --with-sanitizer=... or the environment variables from LODE's sanitizer config - run the actual fuzzer like this: ./clientsession_fuzzer -max_len=16384 fuzzer/data/ - note that at least openSUSE Leap 15.1 sadly ships with a clang with libfuzzer static libs removed from the package, so you need a self-built clang to run the fuzzer (either manual build or one from LODE) - <https://chromium.googlesource.com/chromium/src/testing/libfuzzer/+/refs/heads/master/efficient_fuzzing.md#execution-speed> suggests that "You should aim for at least 1,000 exec/s from your fuzz target locally" (i.e. one run should not take more than 1 ms), so try this minimal approach first. The alternative would be to start from the existing loolwsd_fuzzer binary, then step by step cut it down to not fork(), not do any network traffic, etc -- till it's fast enough that the fuzzer can find interesting input - the various configurations start to be really complex (the matrix is just very large), so try to use Util::isFuzzing() for fuzzer-specific changes (this is what core.git does as well), and only resort to ifdefs for the Util::isFuzzing() itself Change-Id: I72dc1193b34c93eacb5d8e39cef42387d42bd72f Reviewed-on: https://gerrit.libreoffice.org/c/online/+/89226 Tested-by: Jenkins CollaboraOffice <jenkinscollaboraoffice@gmail.com> Reviewed-by: Michael Meeks <michael.meeks@collabora.com>
2020-02-21 15:52:20 +01:00
if ENABLE_LIBFUZZER
noinst_PROGRAMS += clientsession_fuzzer
else
noinst_PROGRAMS += loolwsd_fuzzer
endif
connect_SOURCES = tools/Connect.cpp \
common/Log.cpp \
common/Protocol.cpp \
common/StringVector.cpp \
common/Util.cpp
lokitclient_SOURCES = common/IoUtil.cpp \
common/Log.cpp \
tools/KitClient.cpp \
common/Protocol.cpp \
common/StringVector.cpp \
common/Util.cpp
loolforkit_sources = kit/ChildSession.cpp \
kit/ForKit.cpp \
kit/Kit.cpp
loolforkit_SOURCES = $(loolforkit_sources) \
$(shared_sources)
loolwsd_fuzzer_SOURCES = $(loolwsd_sources) \
$(loolforkit_sources) \
$(shared_sources) \
kit/DummyLibreOfficeKit.cpp
Add an initial libfuzzer based fuzzer - target ClientSession::_handleInput(), since crashing there would bring down the whole loolwsd (not just a kit process), and it deals with input from untrusted users (browsers) - add a --enable-fuzzers configure switch to build with -fsanitize=fuzzer (compared to normal sanitizers build, this is the only special flag needed) - configuring other sanitizers is not done automatically, either use --with-sanitizer=... or the environment variables from LODE's sanitizer config - run the actual fuzzer like this: ./clientsession_fuzzer -max_len=16384 fuzzer/data/ - note that at least openSUSE Leap 15.1 sadly ships with a clang with libfuzzer static libs removed from the package, so you need a self-built clang to run the fuzzer (either manual build or one from LODE) - <https://chromium.googlesource.com/chromium/src/testing/libfuzzer/+/refs/heads/master/efficient_fuzzing.md#execution-speed> suggests that "You should aim for at least 1,000 exec/s from your fuzz target locally" (i.e. one run should not take more than 1 ms), so try this minimal approach first. The alternative would be to start from the existing loolwsd_fuzzer binary, then step by step cut it down to not fork(), not do any network traffic, etc -- till it's fast enough that the fuzzer can find interesting input - the various configurations start to be really complex (the matrix is just very large), so try to use Util::isFuzzing() for fuzzer-specific changes (this is what core.git does as well), and only resort to ifdefs for the Util::isFuzzing() itself Change-Id: I72dc1193b34c93eacb5d8e39cef42387d42bd72f Reviewed-on: https://gerrit.libreoffice.org/c/online/+/89226 Tested-by: Jenkins CollaboraOffice <jenkinscollaboraoffice@gmail.com> Reviewed-by: Michael Meeks <michael.meeks@collabora.com>
2020-02-21 15:52:20 +01:00
clientsession_fuzzer_CPPFLAGS = \
-DKIT_IN_PROCESS=1 \
$(AM_CPPFLAGS)
clientsession_fuzzer_SOURCES = \
$(loolwsd_sources) \
$(loolforkit_sources) \
$(shared_sources) \
fuzzer/ClientSession.cpp
clientsession_fuzzer_LDFLAGS = -fsanitize=fuzzer $(AM_LDFLAGS)
clientnb_SOURCES = net/clientnb.cpp \
common/Log.cpp \
common/StringVector.cpp \
common/Util.cpp
2017-02-14 23:57:03 +01:00
loolmount_SOURCES = tools/mount.cpp
loolmap_SOURCES = tools/map.cpp
loolconvert_SOURCES = tools/Tool.cpp
loolstress_CPPFLAGS = -DTDOC=\"$(abs_top_srcdir)/test/data\" ${include_paths}
loolstress_SOURCES = tools/Stress.cpp \
common/Protocol.cpp \
common/StringVector.cpp \
common/Log.cpp \
common/Util.cpp
loolconfig_SOURCES = tools/Config.cpp \
common/Crypto.cpp \
common/Log.cpp \
common/StringVector.cpp \
common/Util.cpp
loolsocketdump_SOURCES = tools/WebSocketDump.cpp \
$(shared_sources)
wsd_headers = wsd/Admin.hpp \
wsd/AdminModel.hpp \
wsd/Auth.hpp \
wsd/ClientSession.hpp \
wsd/DocumentBroker.hpp \
wsd/Exceptions.hpp \
wsd/FileServer.hpp \
wsd/LOOLWSD.hpp \
wsd/ProofKey.hpp \
wsd/QueueHandler.hpp \
wsd/SenderQueue.hpp \
wsd/Storage.hpp \
wsd/TileCache.hpp \
wsd/TileDesc.hpp \
wsd/TraceFile.hpp \
wsd/UserMessages.hpp
shared_headers = common/Common.hpp \
common/Clipboard.hpp \
common/Crypto.hpp \
common/JsonUtil.hpp \
common/IoUtil.hpp \
common/FileUtil.hpp \
common/Log.hpp \
common/LOOLWebSocket.hpp \
common/Protocol.hpp \
common/StringVector.hpp \
common/Seccomp.hpp \
common/Session.hpp \
common/Unit.hpp \
common/UnitHTTP.hpp \
common/Util.hpp \
common/Authorization.hpp \
common/MessageQueue.hpp \
common/Message.hpp \
common/Png.hpp \
common/Rectangle.hpp \
common/SigUtil.hpp \
common/security.h \
common/SpookyV2.h \
2017-03-23 18:14:51 +01:00
net/DelaySocket.hpp \
net/FakeSocket.hpp \
net/ServerSocket.hpp \
net/Socket.hpp \
net/WebSocketHandler.hpp \
tools/Replay.hpp
if ENABLE_SSL
shared_headers += net/Ssl.hpp \
net/SslSocket.hpp
endif
kit_headers = kit/ChildSession.hpp \
kit/Delta.hpp \
kit/DummyLibreOfficeKit.hpp \
kit/Kit.hpp \
kit/KitHelper.hpp \
kit/Watermark.hpp
noinst_HEADERS = $(wsd_headers) $(shared_headers) $(kit_headers) \
test/WopiTestServer.hpp \
2016-05-09 12:25:42 +02:00
test/countloolkits.hpp \
test/test.hpp \
test/helpers.hpp
dist-hook:
git log -1 --format=%h > $(distdir)/dist_git_hash 2> /dev/null || rm $(distdir)/dist_git_hash
mkdir -p $(distdir)/bundled/include/LibreOfficeKit/
cp @LOKIT_PATH@/LibreOfficeKit/LibreOfficeKit.h \
@LOKIT_PATH@/LibreOfficeKit/LibreOfficeKit.hxx \
@LOKIT_PATH@/LibreOfficeKit/LibreOfficeKitEnums.h \
@LOKIT_PATH@/LibreOfficeKit/LibreOfficeKitInit.h \
@LOKIT_PATH@/LibreOfficeKit/LibreOfficeKitTypes.h \
$(distdir)/bundled/include/LibreOfficeKit/
EXTRA_DIST = discovery.xml \
2016-08-26 12:57:33 +02:00
favicon.ico \
loolkitconfig.xcu \
2019-09-12 18:33:22 +02:00
loolwsd.init.rhel6 \
loolwsd.spec \
2016-04-14 15:06:49 +02:00
loolwsd.xml.in \
loolwsd.service \
2016-04-14 14:50:48 +02:00
sysconfig.loolwsd \
debian/compat \
debian/copyright \
debian/loolwsd.cron.d \
debian/loolwsd.preinst \
debian/loolwsd.service \
debian/rules \
debian/source/format \
debian/changelog \
debian/control \
debian/loolwsd.postinst \
debian/loolwsd.postrm \
2016-04-14 14:50:48 +02:00
etc/key.pem \
etc/cert.pem \
etc/ca-chain.cert.pem \
etc/apache2/loolwsd.conf \
etc/nginx/loolwsd.conf \
scripts/unocommands.py \
$(man_MANS)
if HAVE_LO_PATH
2016-04-12 08:29:57 +02:00
SYSTEM_STAMP = @SYSTEMPLATE_PATH@/system_stamp
CAPABILITIES = $(if @ENABLE_SETCAP@,true,false)
2016-04-12 08:29:57 +02:00
$(SYSTEM_STAMP) : ${top_srcdir}/loolwsd-systemplate-setup
if test "z@SYSTEMPLATE_PATH@" != "z"; then rm -rf "@SYSTEMPLATE_PATH@"; fi
${top_srcdir}/loolwsd-systemplate-setup "@SYSTEMPLATE_PATH@" "@LO_PATH@" && touch $@
@JAILS_PATH@ :
mkdir -p $@
clean-local:
if test "z@JAILS_PATH@" != "z"; then rm -rf "@JAILS_PATH@"; fi
if test "z@SYSTEMPLATE_PATH@" != "z"; then rm -rf "@SYSTEMPLATE_PATH@"; fi
run: all @JAILS_PATH@
@echo "Launching loolwsd"
@fc-cache "@LO_PATH@"/share/fonts/truetype
@cp $(abs_top_srcdir)/test/data/hello.odt $(abs_top_srcdir)/test/data/hello-world.odt
@cp $(abs_top_srcdir)/test/data/hello.ods $(abs_top_srcdir)/test/data/hello-world.ods
@cp $(abs_top_srcdir)/test/data/hello.odp $(abs_top_srcdir)/test/data/hello-world.odp
@echo
./loolwsd --o:sys_template_path="@SYSTEMPLATE_PATH@" \
--o:security.capabilities="$(CAPABILITIES)" \
--o:child_root_path="@JAILS_PATH@" --o:storage.filesystem[@allow]=true \
--o:ssl.cert_file_path="$(abs_top_srcdir)/etc/cert.pem" \
--o:ssl.key_file_path="$(abs_top_srcdir)/etc/key.pem" \
--o:ssl.ca_file_path="$(abs_top_srcdir)/etc/ca-chain.cert.pem" \
--o:admin_console.username=admin --o:admin_console.password=admin \
--o:logging.file[@enable]=true --o:logging.level=trace
sync-writer:
browser-sync start --config browsersync-config.js --startPath "loleaflet/96c23f663/loleaflet.html?file_path=file://$(abs_top_srcdir)/test/data/hello-world.odt"
sync-calc:
browser-sync start --config browsersync-config.js --startPath "loleaflet/96c23f663/loleaflet.html?file_path=file://$(abs_top_srcdir)/test/data/hello-world.ods"
sync-impress:
browser-sync start --config browsersync-config.js --startPath "loleaflet/96c23f663/loleaflet.html?file_path=file://$(abs_top_srcdir)/test/data/hello-world.odp"
run-valgrind: all @JAILS_PATH@
@echo "Launching loolwsd under valgrind (but not forkit/loolkit, yet)"
@fc-cache "@LO_PATH@"/share/fonts/truetype
@cp $(abs_top_srcdir)/test/data/hello.odt $(abs_top_srcdir)/test/data/hello-world.odt
@cp $(abs_top_srcdir)/test/data/hello.ods $(abs_top_srcdir)/test/data/hello-world.ods
@cp $(abs_top_srcdir)/test/data/hello.odp $(abs_top_srcdir)/test/data/hello-world.odp
valgrind --tool=memcheck --trace-children=no -v --read-var-info=yes \
./loolwsd --o:sys_template_path="@SYSTEMPLATE_PATH@" \
--o:child_root_path="@JAILS_PATH@" --o:storage.filesystem[@allow]=true \
--o:ssl.cert_file_path="$(abs_top_srcdir)/etc/cert.pem" \
--o:ssl.key_file_path="$(abs_top_srcdir)/etc/key.pem" \
--o:ssl.ca_file_path="$(abs_top_srcdir)/etc/ca-chain.cert.pem" \
--o:admin_console.username=admin --o:admin_console.password=admin \
--o:logging.file[@enable]=false --o:logging.level=trace
run-gdb: all @JAILS_PATH@
@echo "Launching loolwsd under gdb"
@fc-cache "@LO_PATH@"/share/fonts/truetype
@cp $(abs_top_srcdir)/test/data/hello.odt $(abs_top_srcdir)/test/data/hello-world.odt
@cp $(abs_top_srcdir)/test/data/hello.ods $(abs_top_srcdir)/test/data/hello-world.ods
@cp $(abs_top_srcdir)/test/data/hello.odp $(abs_top_srcdir)/test/data/hello-world.odp
gdb --tui --args \
./loolwsd --o:security.capabilities="false" \
--o:sys_template_path="@SYSTEMPLATE_PATH@" \
--o:child_root_path="@JAILS_PATH@" --o:storage.filesystem[@allow]=true \
--o:ssl.cert_file_path="$(abs_top_srcdir)/etc/cert.pem" \
--o:ssl.key_file_path="$(abs_top_srcdir)/etc/key.pem" \
--o:ssl.ca_file_path="$(abs_top_srcdir)/etc/ca-chain.cert.pem" \
--o:admin_console.username=admin --o:admin_console.password=admin \
--o:logging.file[@enable]=false --o:logging.level=error
run-callgrind: all @JAILS_PATH@
@echo "Launching loolwsd under valgrind's callgrind"
@fc-cache "@LO_PATH@"/share/fonts/truetype
@cp $(abs_top_srcdir)/test/data/hello.odt $(abs_top_srcdir)/test/data/hello-world.odt
@cp $(abs_top_srcdir)/test/data/hello.ods $(abs_top_srcdir)/test/data/hello-world.ods
@cp $(abs_top_srcdir)/test/data/hello.odp $(abs_top_srcdir)/test/data/hello-world.odp
valgrind --tool=callgrind --simulate-cache=yes --dump-instr=yes --num-callers=50 --error-limit=no --trace-children=yes \
./loolwsd --o:security.capabilities="false" \
--o:sys_template_path="@SYSTEMPLATE_PATH@" \
--o:child_root_path="@JAILS_PATH@" --o:storage.filesystem[@allow]=true \
--o:ssl.cert_file_path="$(abs_top_srcdir)/etc/cert.pem" \
--o:ssl.key_file_path="$(abs_top_srcdir)/etc/key.pem" \
--o:ssl.ca_file_path="$(abs_top_srcdir)/etc/ca-chain.cert.pem" \
--o:admin_console.username=admin --o:admin_console.password=admin \
--o:logging.file[@enable]=false --o:logging.level=error
run-strace: all @JAILS_PATH@
@echo "Launching loolwsd under strace"
@fc-cache "@LO_PATH@"/share/fonts/truetype
@cp $(abs_top_srcdir)/test/data/hello.odt $(abs_top_srcdir)/test/data/hello-world.odt
@cp $(abs_top_srcdir)/test/data/hello.ods $(abs_top_srcdir)/test/data/hello-world.ods
@cp $(abs_top_srcdir)/test/data/hello.odp $(abs_top_srcdir)/test/data/hello-world.odp
strace -o strace.log -f -tt -s 256 \
./loolwsd --o:security.capabilities="false" \
--o:sys_template_path="@SYSTEMPLATE_PATH@" \
--o:child_root_path="@JAILS_PATH@" --o:storage.filesystem[@allow]=true \
--o:ssl.cert_file_path="$(abs_top_srcdir)/etc/cert.pem" \
--o:ssl.key_file_path="$(abs_top_srcdir)/etc/key.pem" \
--o:ssl.ca_file_path="$(abs_top_srcdir)/etc/ca-chain.cert.pem" \
--o:admin_console.username=admin --o:admin_console.password=admin \
--o:logging.file[@enable]=false --o:logging.level=error
2016-04-12 08:29:57 +02:00
else
SYSTEM_STAMP =
endif
# After building loolforkit, set its capabilities as required. Do it
# already after a plain 'make' to allow for testing without
# installing. When building for packaging, no need for this, as the
# capabilities won't survive packaging anyway. Instead, handle it when
# installing the RPM or Debian package.
all-local: loolforkit loolmount @JAILS_PATH@ $(SYSTEM_STAMP)
if ENABLE_SETCAP
sudo @SETCAP@ cap_fowner,cap_mknod,cap_sys_chroot=ep loolforkit
sudo @SETCAP@ cap_sys_admin=ep loolmount
else
echo "Skipping capability setting"
endif
# just run the build without any tests
build-nocheck: all-am
endif