2018-10-10 19:03:08 +02:00
|
|
|
Adjunct Processor (AP) Device
|
|
|
|
=============================
|
|
|
|
|
2020-01-28 18:37:27 +01:00
|
|
|
.. contents::
|
|
|
|
|
|
|
|
Introduction
|
|
|
|
------------
|
|
|
|
|
2018-10-10 19:03:08 +02:00
|
|
|
The IBM Adjunct Processor (AP) Cryptographic Facility is comprised
|
|
|
|
of three AP instructions and from 1 to 256 PCIe cryptographic adapter cards.
|
|
|
|
These AP devices provide cryptographic functions to all CPUs assigned to a
|
|
|
|
linux system running in an IBM Z system LPAR.
|
|
|
|
|
|
|
|
On s390x, AP adapter cards are exposed via the AP bus. This document
|
|
|
|
describes how those cards may be made available to KVM guests using the
|
|
|
|
VFIO mediated device framework.
|
|
|
|
|
2020-01-28 18:37:27 +01:00
|
|
|
AP Architectural Overview
|
|
|
|
-------------------------
|
|
|
|
|
2018-10-10 19:03:08 +02:00
|
|
|
In order understand the terminology used in the rest of this document, let's
|
|
|
|
start with some definitions:
|
|
|
|
|
|
|
|
* AP adapter
|
|
|
|
|
|
|
|
An AP adapter is an IBM Z adapter card that can perform cryptographic
|
|
|
|
functions. There can be from 0 to 256 adapters assigned to an LPAR depending
|
|
|
|
on the machine model. Adapters assigned to the LPAR in which a linux host is
|
|
|
|
running will be available to the linux host. Each adapter is identified by a
|
|
|
|
number from 0 to 255; however, the maximum adapter number allowed is
|
|
|
|
determined by machine model. When installed, an AP adapter is accessed by
|
|
|
|
AP instructions executed by any CPU.
|
|
|
|
|
|
|
|
* AP domain
|
|
|
|
|
|
|
|
An adapter is partitioned into domains. Each domain can be thought of as
|
|
|
|
a set of hardware registers for processing AP instructions. An adapter can
|
|
|
|
hold up to 256 domains; however, the maximum domain number allowed is
|
|
|
|
determined by machine model. Each domain is identified by a number from 0 to
|
|
|
|
255. Domains can be further classified into two types:
|
|
|
|
|
|
|
|
* Usage domains are domains that can be accessed directly to process AP
|
|
|
|
commands
|
|
|
|
|
|
|
|
* Control domains are domains that are accessed indirectly by AP
|
|
|
|
commands sent to a usage domain to control or change the domain; for
|
|
|
|
example, to set a secure private key for the domain.
|
|
|
|
|
|
|
|
* AP Queue
|
|
|
|
|
|
|
|
An AP queue is the means by which an AP command-request message is sent to an
|
|
|
|
AP usage domain inside a specific AP. An AP queue is identified by a tuple
|
|
|
|
comprised of an AP adapter ID (APID) and an AP queue index (APQI). The
|
|
|
|
APQI corresponds to a given usage domain number within the adapter. This tuple
|
|
|
|
forms an AP Queue Number (APQN) uniquely identifying an AP queue. AP
|
|
|
|
instructions include a field containing the APQN to identify the AP queue to
|
|
|
|
which the AP command-request message is to be sent for processing.
|
|
|
|
|
|
|
|
* AP Instructions:
|
|
|
|
|
|
|
|
There are three AP instructions:
|
|
|
|
|
|
|
|
* NQAP: to enqueue an AP command-request message to a queue
|
|
|
|
* DQAP: to dequeue an AP command-reply message from a queue
|
|
|
|
* PQAP: to administer the queues
|
|
|
|
|
|
|
|
AP instructions identify the domain that is targeted to process the AP
|
|
|
|
command; this must be one of the usage domains. An AP command may modify a
|
|
|
|
domain that is not one of the usage domains, but the modified domain
|
|
|
|
must be one of the control domains.
|
|
|
|
|
|
|
|
Start Interpretive Execution (SIE) Instruction
|
2020-01-28 18:37:27 +01:00
|
|
|
----------------------------------------------
|
|
|
|
|
2018-10-10 19:03:08 +02:00
|
|
|
A KVM guest is started by executing the Start Interpretive Execution (SIE)
|
|
|
|
instruction. The SIE state description is a control block that contains the
|
|
|
|
state information for a KVM guest and is supplied as input to the SIE
|
|
|
|
instruction. The SIE state description contains a satellite control block called
|
|
|
|
the Crypto Control Block (CRYCB). The CRYCB contains three fields to identify
|
|
|
|
the adapters, usage domains and control domains assigned to the KVM guest:
|
|
|
|
|
|
|
|
* The AP Mask (APM) field is a bit mask that identifies the AP adapters assigned
|
|
|
|
to the KVM guest. Each bit in the mask, from left to right, corresponds to
|
|
|
|
an APID from 0-255. If a bit is set, the corresponding adapter is valid for
|
|
|
|
use by the KVM guest.
|
|
|
|
|
|
|
|
* The AP Queue Mask (AQM) field is a bit mask identifying the AP usage domains
|
|
|
|
assigned to the KVM guest. Each bit in the mask, from left to right,
|
|
|
|
corresponds to an AP queue index (APQI) from 0-255. If a bit is set, the
|
|
|
|
corresponding queue is valid for use by the KVM guest.
|
|
|
|
|
|
|
|
* The AP Domain Mask field is a bit mask that identifies the AP control domains
|
|
|
|
assigned to the KVM guest. The ADM bit mask controls which domains can be
|
|
|
|
changed by an AP command-request message sent to a usage domain from the
|
|
|
|
guest. Each bit in the mask, from left to right, corresponds to a domain from
|
|
|
|
0-255. If a bit is set, the corresponding domain can be modified by an AP
|
|
|
|
command-request message sent to a usage domain.
|
|
|
|
|
|
|
|
If you recall from the description of an AP Queue, AP instructions include
|
|
|
|
an APQN to identify the AP adapter and AP queue to which an AP command-request
|
|
|
|
message is to be sent (NQAP and PQAP instructions), or from which a
|
|
|
|
command-reply message is to be received (DQAP instruction). The validity of an
|
|
|
|
APQN is defined by the matrix calculated from the APM and AQM; it is the
|
|
|
|
cross product of all assigned adapter numbers (APM) with all assigned queue
|
|
|
|
indexes (AQM). For example, if adapters 1 and 2 and usage domains 5 and 6 are
|
|
|
|
assigned to a guest, the APQNs (1,5), (1,6), (2,5) and (2,6) will be valid for
|
|
|
|
the guest.
|
|
|
|
|
|
|
|
The APQNs can provide secure key functionality - i.e., a private key is stored
|
|
|
|
on the adapter card for each of its domains - so each APQN must be assigned to
|
|
|
|
at most one guest or the linux host.
|
|
|
|
|
2020-01-28 18:37:27 +01:00
|
|
|
Example 1: Valid configuration
|
|
|
|
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
|
|
|
|
|
|
|
|
+----------+--------+--------+
|
|
|
|
| | Guest1 | Guest2 |
|
|
|
|
+==========+========+========+
|
|
|
|
| adapters | 1, 2 | 1, 2 |
|
|
|
|
+----------+--------+--------+
|
|
|
|
| domains | 5, 6 | 7 |
|
|
|
|
+----------+--------+--------+
|
|
|
|
|
|
|
|
This is valid because both guests have a unique set of APQNs:
|
|
|
|
|
|
|
|
* Guest1 has APQNs (1,5), (1,6), (2,5) and (2,6);
|
|
|
|
* Guest2 has APQNs (1,7) and (2,7).
|
|
|
|
|
|
|
|
Example 2: Valid configuration
|
|
|
|
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
|
|
|
|
|
|
|
|
+----------+--------+--------+
|
|
|
|
| | Guest1 | Guest2 |
|
|
|
|
+==========+========+========+
|
|
|
|
| adapters | 1, 2 | 3, 4 |
|
|
|
|
+----------+--------+--------+
|
|
|
|
| domains | 5, 6 | 5, 6 |
|
|
|
|
+----------+--------+--------+
|
2018-10-10 19:03:08 +02:00
|
|
|
|
2020-01-28 18:37:27 +01:00
|
|
|
This is also valid because both guests have a unique set of APQNs:
|
2018-10-10 19:03:08 +02:00
|
|
|
|
2020-01-28 18:37:27 +01:00
|
|
|
* Guest1 has APQNs (1,5), (1,6), (2,5), (2,6);
|
|
|
|
* Guest2 has APQNs (3,5), (3,6), (4,5), (4,6)
|
2018-10-10 19:03:08 +02:00
|
|
|
|
2020-01-28 18:37:27 +01:00
|
|
|
Example 3: Invalid configuration
|
|
|
|
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
|
2018-10-10 19:03:08 +02:00
|
|
|
|
2020-01-28 18:37:27 +01:00
|
|
|
+----------+--------+--------+
|
|
|
|
| | Guest1 | Guest2 |
|
|
|
|
+==========+========+========+
|
|
|
|
| adapters | 1, 2 | 1 |
|
|
|
|
+----------+--------+--------+
|
|
|
|
| domains | 5, 6 | 6, 7 |
|
|
|
|
+----------+--------+--------+
|
2018-10-10 19:03:08 +02:00
|
|
|
|
2020-01-28 18:37:27 +01:00
|
|
|
This is an invalid configuration because both guests have access to
|
|
|
|
APQN (1,6).
|
|
|
|
|
|
|
|
AP Matrix Configuration on Linux Host
|
|
|
|
-------------------------------------
|
2018-10-10 19:03:08 +02:00
|
|
|
|
|
|
|
A linux system is a guest of the LPAR in which it is running and has access to
|
|
|
|
the AP resources configured for the LPAR. The LPAR's AP matrix is
|
|
|
|
configured via its Activation Profile which can be edited on the HMC. When the
|
|
|
|
linux system is started, the AP bus will detect the AP devices assigned to the
|
2020-01-28 18:37:27 +01:00
|
|
|
LPAR and create the following in sysfs::
|
2018-10-10 19:03:08 +02:00
|
|
|
|
2020-01-28 18:37:27 +01:00
|
|
|
/sys/bus/ap
|
|
|
|
... [devices]
|
|
|
|
...... xx.yyyy
|
|
|
|
...... ...
|
|
|
|
...... cardxx
|
|
|
|
...... ...
|
2018-10-10 19:03:08 +02:00
|
|
|
|
|
|
|
Where:
|
2020-01-28 18:37:27 +01:00
|
|
|
|
|
|
|
``cardxx``
|
|
|
|
is AP adapter number xx (in hex)
|
|
|
|
|
|
|
|
``xx.yyyy``
|
|
|
|
is an APQN with xx specifying the APID and yyyy specifying the APQI
|
2018-10-10 19:03:08 +02:00
|
|
|
|
|
|
|
For example, if AP adapters 5 and 6 and domains 4, 71 (0x47), 171 (0xab) and
|
|
|
|
255 (0xff) are configured for the LPAR, the sysfs representation on the linux
|
2020-01-28 18:37:27 +01:00
|
|
|
host system would look like this::
|
|
|
|
|
|
|
|
/sys/bus/ap
|
|
|
|
... [devices]
|
|
|
|
...... 05.0004
|
|
|
|
...... 05.0047
|
|
|
|
...... 05.00ab
|
|
|
|
...... 05.00ff
|
|
|
|
...... 06.0004
|
|
|
|
...... 06.0047
|
|
|
|
...... 06.00ab
|
|
|
|
...... 06.00ff
|
|
|
|
...... card05
|
|
|
|
...... card06
|
2018-10-10 19:03:08 +02:00
|
|
|
|
|
|
|
A set of default device drivers are also created to control each type of AP
|
2020-01-28 18:37:27 +01:00
|
|
|
device that can be assigned to the LPAR on which a linux host is running::
|
|
|
|
|
|
|
|
/sys/bus/ap
|
|
|
|
... [drivers]
|
|
|
|
...... [cex2acard] for Crypto Express 2/3 accelerator cards
|
|
|
|
...... [cex2aqueue] for AP queues served by Crypto Express 2/3
|
|
|
|
accelerator cards
|
|
|
|
...... [cex4card] for Crypto Express 4/5/6 accelerator and coprocessor
|
|
|
|
cards
|
|
|
|
...... [cex4queue] for AP queues served by Crypto Express 4/5/6
|
|
|
|
accelerator and coprocessor cards
|
|
|
|
...... [pcixcccard] for Crypto Express 2/3 coprocessor cards
|
|
|
|
...... [pcixccqueue] for AP queues served by Crypto Express 2/3
|
|
|
|
coprocessor cards
|
2018-10-10 19:03:08 +02:00
|
|
|
|
|
|
|
Binding AP devices to device drivers
|
2020-01-28 18:37:27 +01:00
|
|
|
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
|
|
|
|
|
2018-10-10 19:03:08 +02:00
|
|
|
There are two sysfs files that specify bitmasks marking a subset of the APQN
|
|
|
|
range as 'usable by the default AP queue device drivers' or 'not usable by the
|
|
|
|
default device drivers' and thus available for use by the alternate device
|
2020-01-28 18:37:27 +01:00
|
|
|
driver(s). The sysfs locations of the masks are::
|
2018-10-10 19:03:08 +02:00
|
|
|
|
|
|
|
/sys/bus/ap/apmask
|
|
|
|
/sys/bus/ap/aqmask
|
|
|
|
|
2020-01-28 18:37:27 +01:00
|
|
|
The ``apmask`` is a 256-bit mask that identifies a set of AP adapter IDs
|
|
|
|
(APID). Each bit in the mask, from left to right (i.e., from most significant
|
|
|
|
to least significant bit in big endian order), corresponds to an APID from
|
|
|
|
0-255. If a bit is set, the APID is marked as usable only by the default AP
|
|
|
|
queue device drivers; otherwise, the APID is usable by the vfio_ap
|
|
|
|
device driver.
|
2018-10-10 19:03:08 +02:00
|
|
|
|
2020-01-28 18:37:27 +01:00
|
|
|
The ``aqmask`` is a 256-bit mask that identifies a set of AP queue indexes
|
|
|
|
(APQI). Each bit in the mask, from left to right (i.e., from most significant
|
|
|
|
to least significant bit in big endian order), corresponds to an APQI from
|
|
|
|
0-255. If a bit is set, the APQI is marked as usable only by the default AP
|
|
|
|
queue device drivers; otherwise, the APQI is usable by the vfio_ap device
|
|
|
|
driver.
|
2018-10-10 19:03:08 +02:00
|
|
|
|
2020-01-28 18:37:27 +01:00
|
|
|
Take, for example, the following mask::
|
2018-10-10 19:03:08 +02:00
|
|
|
|
|
|
|
0x7dffffffffffffffffffffffffffffffffffffffffffffffffffffffffffffff
|
|
|
|
|
2020-01-28 18:37:27 +01:00
|
|
|
It indicates:
|
2018-10-10 19:03:08 +02:00
|
|
|
|
|
|
|
1, 2, 3, 4, 5, and 7-255 belong to the default drivers' pool, and 0 and 6
|
|
|
|
belong to the vfio_ap device driver's pool.
|
|
|
|
|
2020-01-28 18:37:27 +01:00
|
|
|
The APQN of each AP queue device assigned to the linux host is checked by the
|
|
|
|
AP bus against the set of APQNs derived from the cross product of APIDs
|
|
|
|
and APQIs marked as usable only by the default AP queue device drivers. If a
|
|
|
|
match is detected, only the default AP queue device drivers will be probed;
|
|
|
|
otherwise, the vfio_ap device driver will be probed.
|
2018-10-10 19:03:08 +02:00
|
|
|
|
2020-01-28 18:37:27 +01:00
|
|
|
By default, the two masks are set to reserve all APQNs for use by the default
|
|
|
|
AP queue device drivers. There are two ways the default masks can be changed:
|
2018-10-10 19:03:08 +02:00
|
|
|
|
2020-01-28 18:37:27 +01:00
|
|
|
1. The sysfs mask files can be edited by echoing a string into the
|
|
|
|
respective sysfs mask file in one of two formats:
|
2018-10-10 19:03:08 +02:00
|
|
|
|
2020-01-28 18:37:27 +01:00
|
|
|
* An absolute hex string starting with 0x - like "0x12345678" - sets
|
|
|
|
the mask. If the given string is shorter than the mask, it is padded
|
|
|
|
with 0s on the right; for example, specifying a mask value of 0x41 is
|
|
|
|
the same as specifying::
|
2018-10-10 19:03:08 +02:00
|
|
|
|
|
|
|
0x4100000000000000000000000000000000000000000000000000000000000000
|
|
|
|
|
2020-01-28 18:37:27 +01:00
|
|
|
Keep in mind that the mask reads from left to right (i.e., most
|
|
|
|
significant to least significant bit in big endian order), so the mask
|
|
|
|
above identifies device numbers 1 and 7 (``01000001``).
|
2018-10-10 19:03:08 +02:00
|
|
|
|
2020-01-28 18:37:27 +01:00
|
|
|
If the string is longer than the mask, the operation is terminated with
|
|
|
|
an error (EINVAL).
|
2018-10-10 19:03:08 +02:00
|
|
|
|
2020-01-28 18:37:27 +01:00
|
|
|
* Individual bits in the mask can be switched on and off by specifying
|
|
|
|
each bit number to be switched in a comma separated list. Each bit
|
|
|
|
number string must be prepended with a (``+``) or minus (``-``) to indicate
|
|
|
|
the corresponding bit is to be switched on (``+``) or off (``-``). Some
|
|
|
|
valid values are::
|
2018-10-10 19:03:08 +02:00
|
|
|
|
|
|
|
"+0" switches bit 0 on
|
|
|
|
"-13" switches bit 13 off
|
|
|
|
"+0x41" switches bit 65 on
|
|
|
|
"-0xff" switches bit 255 off
|
|
|
|
|
2020-01-28 18:37:27 +01:00
|
|
|
The following example::
|
|
|
|
|
2018-10-10 19:03:08 +02:00
|
|
|
+0,-6,+0x47,-0xf0
|
|
|
|
|
2020-01-28 18:37:27 +01:00
|
|
|
Switches bits 0 and 71 (0x47) on
|
|
|
|
Switches bits 6 and 240 (0xf0) off
|
2018-10-10 19:03:08 +02:00
|
|
|
|
2020-01-28 18:37:27 +01:00
|
|
|
Note that the bits not specified in the list remain as they were before
|
|
|
|
the operation.
|
2018-10-10 19:03:08 +02:00
|
|
|
|
2020-01-28 18:37:27 +01:00
|
|
|
2. The masks can also be changed at boot time via parameters on the kernel
|
|
|
|
command line like this::
|
2018-10-10 19:03:08 +02:00
|
|
|
|
|
|
|
ap.apmask=0xffff ap.aqmask=0x40
|
|
|
|
|
2020-01-28 18:37:27 +01:00
|
|
|
This would create the following masks:
|
|
|
|
|
|
|
|
apmask::
|
2018-10-10 19:03:08 +02:00
|
|
|
|
|
|
|
0xffff000000000000000000000000000000000000000000000000000000000000
|
|
|
|
|
2020-01-28 18:37:27 +01:00
|
|
|
aqmask::
|
|
|
|
|
2018-10-10 19:03:08 +02:00
|
|
|
0x4000000000000000000000000000000000000000000000000000000000000000
|
|
|
|
|
2020-01-28 18:37:27 +01:00
|
|
|
Resulting in these two pools::
|
2018-10-10 19:03:08 +02:00
|
|
|
|
|
|
|
default drivers pool: adapter 0-15, domain 1
|
|
|
|
alternate drivers pool: adapter 16-255, domains 0, 2-255
|
|
|
|
|
2020-01-28 18:37:27 +01:00
|
|
|
Configuring an AP matrix for a linux guest
|
|
|
|
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
|
|
|
|
|
2018-10-10 19:03:08 +02:00
|
|
|
The sysfs interfaces for configuring an AP matrix for a guest are built on the
|
|
|
|
VFIO mediated device framework. To configure an AP matrix for a guest, a
|
2020-01-28 18:37:27 +01:00
|
|
|
mediated matrix device must first be created for the ``/sys/devices/vfio_ap/matrix``
|
2018-10-10 19:03:08 +02:00
|
|
|
device. When the vfio_ap device driver is loaded, it registers with the VFIO
|
|
|
|
mediated device framework. When the driver registers, the sysfs interfaces for
|
2020-01-28 18:37:27 +01:00
|
|
|
creating mediated matrix devices is created::
|
2018-10-10 19:03:08 +02:00
|
|
|
|
2020-01-28 18:37:27 +01:00
|
|
|
/sys/devices
|
|
|
|
... [vfio_ap]
|
|
|
|
......[matrix]
|
|
|
|
......... [mdev_supported_types]
|
|
|
|
............ [vfio_ap-passthrough]
|
|
|
|
............... create
|
|
|
|
............... [devices]
|
2018-10-10 19:03:08 +02:00
|
|
|
|
|
|
|
A mediated AP matrix device is created by writing a UUID to the attribute file
|
2020-01-28 18:37:27 +01:00
|
|
|
named ``create``, for example::
|
2018-10-10 19:03:08 +02:00
|
|
|
|
|
|
|
uuidgen > create
|
|
|
|
|
2020-01-28 18:37:27 +01:00
|
|
|
or
|
|
|
|
|
|
|
|
::
|
2018-10-10 19:03:08 +02:00
|
|
|
|
|
|
|
echo $uuid > create
|
|
|
|
|
|
|
|
When a mediated AP matrix device is created, a sysfs directory named after
|
2020-01-28 18:37:27 +01:00
|
|
|
the UUID is created in the ``devices`` subdirectory::
|
2018-10-10 19:03:08 +02:00
|
|
|
|
2020-01-28 18:37:27 +01:00
|
|
|
/sys/devices
|
|
|
|
... [vfio_ap]
|
|
|
|
......[matrix]
|
|
|
|
......... [mdev_supported_types]
|
|
|
|
............ [vfio_ap-passthrough]
|
|
|
|
............... create
|
|
|
|
............... [devices]
|
|
|
|
.................. [$uuid]
|
2018-10-10 19:03:08 +02:00
|
|
|
|
|
|
|
There will also be three sets of attribute files created in the mediated
|
|
|
|
matrix device's sysfs directory to configure an AP matrix for the
|
2020-01-28 18:37:27 +01:00
|
|
|
KVM guest::
|
|
|
|
|
|
|
|
/sys/devices
|
|
|
|
... [vfio_ap]
|
|
|
|
......[matrix]
|
|
|
|
......... [mdev_supported_types]
|
|
|
|
............ [vfio_ap-passthrough]
|
|
|
|
............... create
|
|
|
|
............... [devices]
|
|
|
|
.................. [$uuid]
|
|
|
|
..................... assign_adapter
|
|
|
|
..................... assign_control_domain
|
|
|
|
..................... assign_domain
|
|
|
|
..................... matrix
|
|
|
|
..................... unassign_adapter
|
|
|
|
..................... unassign_control_domain
|
|
|
|
..................... unassign_domain
|
|
|
|
|
|
|
|
``assign_adapter``
|
2018-10-10 19:03:08 +02:00
|
|
|
To assign an AP adapter to the mediated matrix device, its APID is written
|
2020-01-28 18:37:27 +01:00
|
|
|
to the ``assign_adapter`` file. This may be done multiple times to assign more
|
2018-10-10 19:03:08 +02:00
|
|
|
than one adapter. The APID may be specified using conventional semantics
|
|
|
|
as a decimal, hexadecimal, or octal number. For example, to assign adapters
|
|
|
|
4, 5 and 16 to a mediated matrix device in decimal, hexadecimal and octal
|
2020-01-28 18:37:27 +01:00
|
|
|
respectively::
|
2018-10-10 19:03:08 +02:00
|
|
|
|
|
|
|
echo 4 > assign_adapter
|
|
|
|
echo 0x5 > assign_adapter
|
|
|
|
echo 020 > assign_adapter
|
|
|
|
|
|
|
|
In order to successfully assign an adapter:
|
|
|
|
|
|
|
|
* The adapter number specified must represent a value from 0 up to the
|
|
|
|
maximum adapter number allowed by the machine model. If an adapter number
|
|
|
|
higher than the maximum is specified, the operation will terminate with
|
|
|
|
an error (ENODEV).
|
|
|
|
|
|
|
|
* All APQNs that can be derived from the adapter ID being assigned and the
|
|
|
|
IDs of the previously assigned domains must be bound to the vfio_ap device
|
|
|
|
driver. If no domains have yet been assigned, then there must be at least
|
|
|
|
one APQN with the specified APID bound to the vfio_ap driver. If no such
|
|
|
|
APQNs are bound to the driver, the operation will terminate with an
|
|
|
|
error (EADDRNOTAVAIL).
|
|
|
|
|
2020-01-28 18:37:27 +01:00
|
|
|
* No APQN that can be derived from the adapter ID and the IDs of the
|
2018-10-10 19:03:08 +02:00
|
|
|
previously assigned domains can be assigned to another mediated matrix
|
|
|
|
device. If an APQN is assigned to another mediated matrix device, the
|
|
|
|
operation will terminate with an error (EADDRINUSE).
|
|
|
|
|
2020-01-28 18:37:27 +01:00
|
|
|
``unassign_adapter``
|
|
|
|
To unassign an AP adapter, its APID is written to the ``unassign_adapter``
|
2018-10-10 19:03:08 +02:00
|
|
|
file. This may also be done multiple times to unassign more than one adapter.
|
|
|
|
|
2020-01-28 18:37:27 +01:00
|
|
|
``assign_domain``
|
2018-10-10 19:03:08 +02:00
|
|
|
To assign a usage domain, the domain number is written into the
|
2020-01-28 18:37:27 +01:00
|
|
|
``assign_domain`` file. This may be done multiple times to assign more than one
|
2018-10-10 19:03:08 +02:00
|
|
|
usage domain. The domain number is specified using conventional semantics as
|
|
|
|
a decimal, hexadecimal, or octal number. For example, to assign usage domains
|
|
|
|
4, 8, and 71 to a mediated matrix device in decimal, hexadecimal and octal
|
2020-01-28 18:37:27 +01:00
|
|
|
respectively::
|
2018-10-10 19:03:08 +02:00
|
|
|
|
|
|
|
echo 4 > assign_domain
|
|
|
|
echo 0x8 > assign_domain
|
|
|
|
echo 0107 > assign_domain
|
|
|
|
|
|
|
|
In order to successfully assign a domain:
|
|
|
|
|
|
|
|
* The domain number specified must represent a value from 0 up to the
|
|
|
|
maximum domain number allowed by the machine model. If a domain number
|
|
|
|
higher than the maximum is specified, the operation will terminate with
|
|
|
|
an error (ENODEV).
|
|
|
|
|
|
|
|
* All APQNs that can be derived from the domain ID being assigned and the IDs
|
|
|
|
of the previously assigned adapters must be bound to the vfio_ap device
|
|
|
|
driver. If no domains have yet been assigned, then there must be at least
|
|
|
|
one APQN with the specified APQI bound to the vfio_ap driver. If no such
|
|
|
|
APQNs are bound to the driver, the operation will terminate with an
|
|
|
|
error (EADDRNOTAVAIL).
|
|
|
|
|
2020-01-28 18:37:27 +01:00
|
|
|
* No APQN that can be derived from the domain ID being assigned and the IDs
|
2018-10-10 19:03:08 +02:00
|
|
|
of the previously assigned adapters can be assigned to another mediated
|
|
|
|
matrix device. If an APQN is assigned to another mediated matrix device,
|
|
|
|
the operation will terminate with an error (EADDRINUSE).
|
|
|
|
|
2020-01-28 18:37:27 +01:00
|
|
|
``unassign_domain``
|
2018-10-10 19:03:08 +02:00
|
|
|
To unassign a usage domain, the domain number is written into the
|
2020-01-28 18:37:27 +01:00
|
|
|
``unassign_domain`` file. This may be done multiple times to unassign more than
|
2018-10-10 19:03:08 +02:00
|
|
|
one usage domain.
|
|
|
|
|
2020-01-28 18:37:27 +01:00
|
|
|
``assign_control_domain``
|
2018-10-10 19:03:08 +02:00
|
|
|
To assign a control domain, the domain number is written into the
|
2020-01-28 18:37:27 +01:00
|
|
|
``assign_control_domain`` file. This may be done multiple times to
|
2018-10-10 19:03:08 +02:00
|
|
|
assign more than one control domain. The domain number may be specified using
|
|
|
|
conventional semantics as a decimal, hexadecimal, or octal number. For
|
|
|
|
example, to assign control domains 4, 8, and 71 to a mediated matrix device
|
2020-01-28 18:37:27 +01:00
|
|
|
in decimal, hexadecimal and octal respectively::
|
2018-10-10 19:03:08 +02:00
|
|
|
|
|
|
|
echo 4 > assign_domain
|
|
|
|
echo 0x8 > assign_domain
|
|
|
|
echo 0107 > assign_domain
|
|
|
|
|
|
|
|
In order to successfully assign a control domain, the domain number
|
|
|
|
specified must represent a value from 0 up to the maximum domain number
|
|
|
|
allowed by the machine model. If a control domain number higher than the
|
|
|
|
maximum is specified, the operation will terminate with an error (ENODEV).
|
|
|
|
|
2020-01-28 18:37:27 +01:00
|
|
|
``unassign_control_domain``
|
2018-10-10 19:03:08 +02:00
|
|
|
To unassign a control domain, the domain number is written into the
|
2020-01-28 18:37:27 +01:00
|
|
|
``unassign_domain`` file. This may be done multiple times to unassign more than
|
2018-10-10 19:03:08 +02:00
|
|
|
one control domain.
|
|
|
|
|
2019-02-18 20:49:57 +01:00
|
|
|
Notes: No changes to the AP matrix will be allowed while a guest using
|
2018-10-10 19:03:08 +02:00
|
|
|
the mediated matrix device is running. Attempts to assign an adapter,
|
|
|
|
domain or control domain will be rejected and an error (EBUSY) returned.
|
|
|
|
|
2020-01-28 18:37:27 +01:00
|
|
|
Starting a Linux Guest Configured with an AP Matrix
|
|
|
|
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
|
|
|
|
|
2018-10-10 19:03:08 +02:00
|
|
|
To provide a mediated matrix device for use by a guest, the following option
|
2020-01-28 18:37:27 +01:00
|
|
|
must be specified on the QEMU command line::
|
2018-10-10 19:03:08 +02:00
|
|
|
|
|
|
|
-device vfio_ap,sysfsdev=$path-to-mdev
|
|
|
|
|
|
|
|
The sysfsdev parameter specifies the path to the mediated matrix device.
|
2020-01-28 18:37:27 +01:00
|
|
|
There are a number of ways to specify this path::
|
2018-10-10 19:03:08 +02:00
|
|
|
|
2020-01-28 18:37:27 +01:00
|
|
|
/sys/devices/vfio_ap/matrix/$uuid
|
|
|
|
/sys/bus/mdev/devices/$uuid
|
|
|
|
/sys/bus/mdev/drivers/vfio_mdev/$uuid
|
|
|
|
/sys/devices/vfio_ap/matrix/mdev_supported_types/vfio_ap-passthrough/devices/$uuid
|
2018-10-10 19:03:08 +02:00
|
|
|
|
|
|
|
When the linux guest is started, the guest will open the mediated
|
|
|
|
matrix device's file descriptor to get information about the mediated matrix
|
2020-01-28 18:37:27 +01:00
|
|
|
device. The ``vfio_ap`` device driver will update the APM, AQM, and ADM fields in
|
2018-10-10 19:03:08 +02:00
|
|
|
the guest's CRYCB with the adapter, usage domain and control domains assigned
|
|
|
|
via the mediated matrix device's sysfs attribute files. Programs running on the
|
|
|
|
linux guest will then:
|
|
|
|
|
|
|
|
1. Have direct access to the APQNs derived from the cross product of the AP
|
|
|
|
adapter numbers (APID) and queue indexes (APQI) specified in the APM and AQM
|
|
|
|
fields of the guests's CRYCB respectively. These APQNs identify the AP queues
|
|
|
|
that are valid for use by the guest; meaning, AP commands can be sent by the
|
|
|
|
guest to any of these queues for processing.
|
|
|
|
|
|
|
|
2. Have authorization to process AP commands to change a control domain
|
|
|
|
identified in the ADM field of the guest's CRYCB. The AP command must be sent
|
|
|
|
to a valid APQN (see 1 above).
|
|
|
|
|
|
|
|
CPU model features:
|
|
|
|
|
|
|
|
Three CPU model features are available for controlling guest access to AP
|
|
|
|
facilities:
|
|
|
|
|
|
|
|
1. AP facilities feature
|
|
|
|
|
|
|
|
The AP facilities feature indicates that AP facilities are installed on the
|
|
|
|
guest. This feature will be exposed for use only if the AP facilities
|
|
|
|
are installed on the host system. The feature is s390-specific and is
|
2020-01-28 18:37:27 +01:00
|
|
|
represented as a parameter of the -cpu option on the QEMU command line::
|
2018-10-10 19:03:08 +02:00
|
|
|
|
|
|
|
qemu-system-s390x -cpu $model,ap=on|off
|
|
|
|
|
2020-01-28 18:37:27 +01:00
|
|
|
Where:
|
2018-10-10 19:03:08 +02:00
|
|
|
|
2020-01-28 18:37:27 +01:00
|
|
|
``$model``
|
|
|
|
is the CPU model defined for the guest (defaults to the model of
|
|
|
|
the host system if not specified).
|
2018-10-10 19:03:08 +02:00
|
|
|
|
2020-01-28 18:37:27 +01:00
|
|
|
``ap=on|off``
|
|
|
|
indicates whether AP facilities are installed (on) or not
|
|
|
|
(off). The default for CPU models zEC12 or newer
|
|
|
|
is ``ap=on``. AP facilities must be installed on the guest if a
|
|
|
|
vfio-ap device (``-device vfio-ap,sysfsdev=$path``) is configured
|
|
|
|
for the guest, or the guest will fail to start.
|
2018-10-10 19:03:08 +02:00
|
|
|
|
|
|
|
2. Query Configuration Information (QCI) facility
|
|
|
|
|
|
|
|
The QCI facility is used by the AP bus running on the guest to query the
|
|
|
|
configuration of the AP facilities. This facility will be available
|
|
|
|
only if the QCI facility is installed on the host system. The feature is
|
|
|
|
s390-specific and is represented as a parameter of the -cpu option on the
|
2020-01-28 18:37:27 +01:00
|
|
|
QEMU command line::
|
2018-10-10 19:03:08 +02:00
|
|
|
|
|
|
|
qemu-system-s390x -cpu $model,apqci=on|off
|
|
|
|
|
2020-01-28 18:37:27 +01:00
|
|
|
Where:
|
2018-10-10 19:03:08 +02:00
|
|
|
|
2020-01-28 18:37:27 +01:00
|
|
|
``$model``
|
|
|
|
is the CPU model defined for the guest
|
2018-10-10 19:03:08 +02:00
|
|
|
|
2020-01-28 18:37:27 +01:00
|
|
|
``apqci=on|off``
|
|
|
|
indicates whether the QCI facility is installed (on) or
|
|
|
|
not (off). The default for CPU models zEC12 or newer
|
|
|
|
is ``apqci=on``; for older models, QCI will not be installed.
|
2018-10-10 19:03:08 +02:00
|
|
|
|
2020-01-28 18:37:27 +01:00
|
|
|
If QCI is installed (``apqci=on``) but AP facilities are not
|
|
|
|
(``ap=off``), an error message will be logged, but the guest
|
|
|
|
will be allowed to start. It makes no sense to have QCI
|
|
|
|
installed if the AP facilities are not; this is considered
|
|
|
|
an invalid configuration.
|
2018-10-10 19:03:08 +02:00
|
|
|
|
2020-01-28 18:37:27 +01:00
|
|
|
If the QCI facility is not installed, APQNs with an APQI
|
|
|
|
greater than 15 will not be detected by the AP bus
|
|
|
|
running on the guest.
|
2018-10-10 19:03:08 +02:00
|
|
|
|
|
|
|
3. Adjunct Process Facility Test (APFT) facility
|
|
|
|
|
|
|
|
The APFT facility is used by the AP bus running on the guest to test the
|
|
|
|
AP facilities available for a given AP queue. This facility will be available
|
|
|
|
only if the APFT facility is installed on the host system. The feature is
|
|
|
|
s390-specific and is represented as a parameter of the -cpu option on the
|
2020-01-28 18:37:27 +01:00
|
|
|
QEMU command line::
|
2018-10-10 19:03:08 +02:00
|
|
|
|
|
|
|
qemu-system-s390x -cpu $model,apft=on|off
|
|
|
|
|
2020-01-28 18:37:27 +01:00
|
|
|
Where:
|
|
|
|
|
|
|
|
``$model``
|
|
|
|
is the CPU model defined for the guest (defaults to the model of
|
|
|
|
the host system if not specified).
|
2018-10-10 19:03:08 +02:00
|
|
|
|
2020-01-28 18:37:27 +01:00
|
|
|
``apft=on|off``
|
|
|
|
indicates whether the APFT facility is installed (on) or
|
|
|
|
not (off). The default for CPU models zEC12 and
|
|
|
|
newer is ``apft=on`` for older models, APFT will not be
|
|
|
|
installed.
|
2018-10-10 19:03:08 +02:00
|
|
|
|
2020-01-28 18:37:27 +01:00
|
|
|
If APFT is installed (``apft=on``) but AP facilities are not
|
|
|
|
(``ap=off``), an error message will be logged, but the guest
|
|
|
|
will be allowed to start. It makes no sense to have APFT
|
|
|
|
installed if the AP facilities are not; this is considered
|
|
|
|
an invalid configuration.
|
2018-10-10 19:03:08 +02:00
|
|
|
|
2020-01-28 18:37:27 +01:00
|
|
|
It also makes no sense to turn APFT off because the AP bus
|
|
|
|
running on the guest will not detect CEX4 and newer devices
|
|
|
|
without it. Since only CEX4 and newer devices are supported
|
|
|
|
for guest usage, no AP devices can be made accessible to a
|
|
|
|
guest started without APFT installed.
|
2018-10-10 19:03:08 +02:00
|
|
|
|
2020-01-28 18:37:27 +01:00
|
|
|
Hot plug a vfio-ap device into a running guest
|
|
|
|
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
|
2018-10-10 19:03:08 +02:00
|
|
|
|
2019-02-18 20:49:57 +01:00
|
|
|
Only one vfio-ap device can be attached to the virtual machine's ap-bus, so a
|
|
|
|
vfio-ap device can be hot plugged if and only if no vfio-ap device is attached
|
|
|
|
to the bus already, whether via the QEMU command line or a prior hot plug
|
|
|
|
action.
|
|
|
|
|
2020-01-28 18:37:27 +01:00
|
|
|
To hot plug a vfio-ap device, use the QEMU ``device_add`` command::
|
2019-02-18 20:49:57 +01:00
|
|
|
|
|
|
|
(qemu) device_add vfio-ap,sysfsdev="$path-to-mdev"
|
|
|
|
|
2020-01-28 18:37:27 +01:00
|
|
|
Where the ``$path-to-mdev`` value specifies the absolute path to a mediated
|
|
|
|
device to which AP resources to be used by the guest have been assigned.
|
2019-02-18 20:49:57 +01:00
|
|
|
|
|
|
|
Note that on Linux guests, the AP devices will be created in the
|
2020-01-28 18:37:27 +01:00
|
|
|
``/sys/bus/ap/devices`` directory when the AP bus subsequently performs its periodic
|
2019-02-18 20:49:57 +01:00
|
|
|
scan, so there may be a short delay before the AP devices are accessible on the
|
|
|
|
guest.
|
|
|
|
|
|
|
|
The command will fail if:
|
|
|
|
|
|
|
|
* A vfio-ap device has already been attached to the virtual machine's ap-bus.
|
|
|
|
|
|
|
|
* The CPU model features for controlling guest access to AP facilities are not
|
|
|
|
enabled (see 'CPU model features' subsection in the previous section).
|
|
|
|
|
2020-01-28 18:37:27 +01:00
|
|
|
Hot unplug a vfio-ap device from a running guest
|
|
|
|
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
|
|
|
|
|
2019-02-18 20:49:57 +01:00
|
|
|
A vfio-ap device can be unplugged from a running KVM guest if a vfio-ap device
|
|
|
|
has been attached to the virtual machine's ap-bus via the QEMU command line
|
|
|
|
or a prior hot plug action.
|
|
|
|
|
2020-01-28 18:37:27 +01:00
|
|
|
To hot unplug a vfio-ap device, use the QEMU ``device_del`` command::
|
2019-02-18 20:49:57 +01:00
|
|
|
|
|
|
|
(qemu) device_del vfio-ap,sysfsdev="$path-to-mdev"
|
|
|
|
|
2020-01-28 18:37:27 +01:00
|
|
|
Where ``$path-to-mdev`` is the same as the path specified when the vfio-ap
|
|
|
|
device was attached to the virtual machine's ap-bus.
|
2019-02-18 20:49:57 +01:00
|
|
|
|
2020-01-28 18:37:27 +01:00
|
|
|
On a Linux guest, the AP devices will be removed from the ``/sys/bus/ap/devices``
|
2019-02-18 20:49:57 +01:00
|
|
|
directory on the guest when the AP bus subsequently performs its periodic scan,
|
|
|
|
so there may be a short delay before the AP devices are no longer accessible by
|
|
|
|
the guest.
|
|
|
|
|
2020-01-28 18:37:27 +01:00
|
|
|
The command will fail if the ``$path-to-mdev`` specified on the ``device_del`` command
|
2019-02-18 20:49:57 +01:00
|
|
|
does not match the value specified when the vfio-ap device was attached to
|
|
|
|
the virtual machine's ap-bus.
|
|
|
|
|
2020-01-28 18:37:27 +01:00
|
|
|
Example: Configure AP Matrices for Three Linux Guests
|
|
|
|
-----------------------------------------------------
|
|
|
|
|
2018-10-10 19:03:08 +02:00
|
|
|
Let's now provide an example to illustrate how KVM guests may be given
|
|
|
|
access to AP facilities. For this example, we will show how to configure
|
|
|
|
three guests such that executing the lszcrypt command on the guests would
|
|
|
|
look like this:
|
|
|
|
|
2020-01-28 18:37:27 +01:00
|
|
|
Guest1::
|
|
|
|
|
|
|
|
CARD.DOMAIN TYPE MODE
|
|
|
|
------------------------------
|
|
|
|
05 CEX5C CCA-Coproc
|
|
|
|
05.0004 CEX5C CCA-Coproc
|
|
|
|
05.00ab CEX5C CCA-Coproc
|
|
|
|
06 CEX5A Accelerator
|
|
|
|
06.0004 CEX5A Accelerator
|
|
|
|
06.00ab CEX5C CCA-Coproc
|
|
|
|
|
|
|
|
Guest2::
|
|
|
|
|
|
|
|
CARD.DOMAIN TYPE MODE
|
|
|
|
------------------------------
|
|
|
|
05 CEX5A Accelerator
|
|
|
|
05.0047 CEX5A Accelerator
|
|
|
|
05.00ff CEX5A Accelerator
|
|
|
|
|
|
|
|
Guest3::
|
|
|
|
|
|
|
|
CARD.DOMAIN TYPE MODE
|
|
|
|
------------------------------
|
|
|
|
06 CEX5A Accelerator
|
|
|
|
06.0047 CEX5A Accelerator
|
|
|
|
06.00ff CEX5A Accelerator
|
2018-10-10 19:03:08 +02:00
|
|
|
|
|
|
|
These are the steps:
|
|
|
|
|
|
|
|
1. Install the vfio_ap module on the linux host. The dependency chain for the
|
|
|
|
vfio_ap module is:
|
2020-01-28 18:37:27 +01:00
|
|
|
|
2018-10-10 19:03:08 +02:00
|
|
|
* iommu
|
|
|
|
* s390
|
|
|
|
* zcrypt
|
|
|
|
* vfio
|
|
|
|
* vfio_mdev
|
|
|
|
* vfio_mdev_device
|
|
|
|
* KVM
|
|
|
|
|
|
|
|
To build the vfio_ap module, the kernel build must be configured with the
|
|
|
|
following Kconfig elements selected:
|
2020-01-28 18:37:27 +01:00
|
|
|
|
2018-10-10 19:03:08 +02:00
|
|
|
* IOMMU_SUPPORT
|
|
|
|
* S390
|
|
|
|
* ZCRYPT
|
|
|
|
* S390_AP_IOMMU
|
|
|
|
* VFIO
|
|
|
|
* VFIO_MDEV
|
|
|
|
* VFIO_MDEV_DEVICE
|
|
|
|
* KVM
|
|
|
|
|
2020-01-28 18:37:27 +01:00
|
|
|
If using make menuconfig select the following to build the vfio_ap module::
|
|
|
|
-> Device Drivers
|
|
|
|
-> IOMMU Hardware Support
|
|
|
|
select S390 AP IOMMU Support
|
|
|
|
-> VFIO Non-Privileged userspace driver framework
|
|
|
|
-> Mediated device driver framework
|
|
|
|
-> VFIO driver for Mediated devices
|
|
|
|
-> I/O subsystem
|
|
|
|
-> VFIO support for AP devices
|
2018-10-10 19:03:08 +02:00
|
|
|
|
|
|
|
2. Secure the AP queues to be used by the three guests so that the host can not
|
|
|
|
access them. To secure the AP queues 05.0004, 05.0047, 05.00ab, 05.00ff,
|
|
|
|
06.0004, 06.0047, 06.00ab, and 06.00ff for use by the vfio_ap device driver,
|
|
|
|
the corresponding APQNs must be removed from the default queue drivers pool
|
2020-01-28 18:37:27 +01:00
|
|
|
as follows::
|
2018-10-10 19:03:08 +02:00
|
|
|
|
|
|
|
echo -5,-6 > /sys/bus/ap/apmask
|
|
|
|
|
|
|
|
echo -4,-0x47,-0xab,-0xff > /sys/bus/ap/aqmask
|
|
|
|
|
|
|
|
This will result in AP queues 05.0004, 05.0047, 05.00ab, 05.00ff, 06.0004,
|
|
|
|
06.0047, 06.00ab, and 06.00ff getting bound to the vfio_ap device driver. The
|
|
|
|
sysfs directory for the vfio_ap device driver will now contain symbolic links
|
2020-01-28 18:37:27 +01:00
|
|
|
to the AP queue devices bound to it::
|
|
|
|
|
|
|
|
/sys/bus/ap
|
|
|
|
... [drivers]
|
|
|
|
...... [vfio_ap]
|
|
|
|
......... [05.0004]
|
|
|
|
......... [05.0047]
|
|
|
|
......... [05.00ab]
|
|
|
|
......... [05.00ff]
|
|
|
|
......... [06.0004]
|
|
|
|
......... [06.0047]
|
|
|
|
......... [06.00ab]
|
|
|
|
......... [06.00ff]
|
2018-10-10 19:03:08 +02:00
|
|
|
|
|
|
|
Keep in mind that only type 10 and newer adapters (i.e., CEX4 and later)
|
|
|
|
can be bound to the vfio_ap device driver. The reason for this is to
|
|
|
|
simplify the implementation by not needlessly complicating the design by
|
|
|
|
supporting older devices that will go out of service in the relatively near
|
|
|
|
future, and for which there are few older systems on which to test.
|
|
|
|
|
|
|
|
The administrator, therefore, must take care to secure only AP queues that
|
|
|
|
can be bound to the vfio_ap device driver. The device type for a given AP
|
|
|
|
queue device can be read from the parent card's sysfs directory. For example,
|
2020-01-28 18:37:27 +01:00
|
|
|
to see the hardware type of the queue 05.0004::
|
2018-10-10 19:03:08 +02:00
|
|
|
|
2020-01-28 18:37:27 +01:00
|
|
|
cat /sys/bus/ap/devices/card05/hwtype
|
2018-10-10 19:03:08 +02:00
|
|
|
|
|
|
|
The hwtype must be 10 or higher (CEX4 or newer) in order to be bound to the
|
|
|
|
vfio_ap device driver.
|
|
|
|
|
|
|
|
3. Create the mediated devices needed to configure the AP matrixes for the
|
|
|
|
three guests and to provide an interface to the vfio_ap driver for
|
2020-01-28 18:37:27 +01:00
|
|
|
use by the guests::
|
2018-10-10 19:03:08 +02:00
|
|
|
|
2020-01-28 18:37:27 +01:00
|
|
|
/sys/devices/vfio_ap/matrix/
|
|
|
|
... [mdev_supported_types]
|
|
|
|
...... [vfio_ap-passthrough] (passthrough mediated matrix device type)
|
|
|
|
......... create
|
|
|
|
......... [devices]
|
2018-10-10 19:03:08 +02:00
|
|
|
|
2020-01-28 18:37:27 +01:00
|
|
|
To create the mediated devices for the three guests::
|
2018-10-10 19:03:08 +02:00
|
|
|
|
|
|
|
uuidgen > create
|
|
|
|
uuidgen > create
|
|
|
|
uuidgen > create
|
|
|
|
|
2020-01-28 18:37:27 +01:00
|
|
|
or
|
2018-10-10 19:03:08 +02:00
|
|
|
|
2020-01-28 18:37:27 +01:00
|
|
|
::
|
|
|
|
|
|
|
|
echo $uuid1 > create
|
|
|
|
echo $uuid2 > create
|
|
|
|
echo $uuid3 > create
|
2018-10-10 19:03:08 +02:00
|
|
|
|
|
|
|
This will create three mediated devices in the [devices] subdirectory named
|
|
|
|
after the UUID used to create the mediated device. We'll call them $uuid1,
|
2020-01-28 18:37:27 +01:00
|
|
|
$uuid2 and $uuid3 and this is the sysfs directory structure after creation::
|
|
|
|
|
|
|
|
/sys/devices/vfio_ap/matrix/
|
|
|
|
... [mdev_supported_types]
|
|
|
|
...... [vfio_ap-passthrough]
|
|
|
|
......... [devices]
|
|
|
|
............ [$uuid1]
|
|
|
|
............... assign_adapter
|
|
|
|
............... assign_control_domain
|
|
|
|
............... assign_domain
|
|
|
|
............... matrix
|
|
|
|
............... unassign_adapter
|
|
|
|
............... unassign_control_domain
|
|
|
|
............... unassign_domain
|
|
|
|
|
|
|
|
............ [$uuid2]
|
|
|
|
............... assign_adapter
|
|
|
|
............... assign_control_domain
|
|
|
|
............... assign_domain
|
|
|
|
............... matrix
|
|
|
|
............... unassign_adapter
|
|
|
|
............... unassign_control_domain
|
|
|
|
............... unassign_domain
|
|
|
|
|
|
|
|
............ [$uuid3]
|
|
|
|
............... assign_adapter
|
|
|
|
............... assign_control_domain
|
|
|
|
............... assign_domain
|
|
|
|
............... matrix
|
|
|
|
............... unassign_adapter
|
|
|
|
............... unassign_control_domain
|
|
|
|
............... unassign_domain
|
2018-10-10 19:03:08 +02:00
|
|
|
|
|
|
|
4. The administrator now needs to configure the matrixes for the mediated
|
|
|
|
devices $uuid1 (for Guest1), $uuid2 (for Guest2) and $uuid3 (for Guest3).
|
|
|
|
|
2020-01-28 18:37:27 +01:00
|
|
|
This is how the matrix is configured for Guest1::
|
2018-10-10 19:03:08 +02:00
|
|
|
|
|
|
|
echo 5 > assign_adapter
|
|
|
|
echo 6 > assign_adapter
|
|
|
|
echo 4 > assign_domain
|
|
|
|
echo 0xab > assign_domain
|
|
|
|
|
2020-01-28 18:37:27 +01:00
|
|
|
Control domains can similarly be assigned using the assign_control_domain
|
|
|
|
sysfs file.
|
2018-10-10 19:03:08 +02:00
|
|
|
|
2020-01-28 18:37:27 +01:00
|
|
|
If a mistake is made configuring an adapter, domain or control domain,
|
|
|
|
you can use the ``unassign_xxx`` interfaces to unassign the adapter, domain or
|
|
|
|
control domain.
|
2018-10-10 19:03:08 +02:00
|
|
|
|
2020-01-28 18:37:27 +01:00
|
|
|
To display the matrix configuration for Guest1::
|
2018-10-10 19:03:08 +02:00
|
|
|
|
|
|
|
cat matrix
|
|
|
|
|
2020-01-28 18:37:27 +01:00
|
|
|
The output will display the APQNs in the format ``xx.yyyy``, where xx is
|
|
|
|
the adapter number and yyyy is the domain number. The output for Guest1
|
|
|
|
will look like this::
|
2018-10-10 19:03:08 +02:00
|
|
|
|
|
|
|
05.0004
|
|
|
|
05.00ab
|
|
|
|
06.0004
|
|
|
|
06.00ab
|
|
|
|
|
2020-01-28 18:37:27 +01:00
|
|
|
This is how the matrix is configured for Guest2::
|
2018-10-10 19:03:08 +02:00
|
|
|
|
|
|
|
echo 5 > assign_adapter
|
|
|
|
echo 0x47 > assign_domain
|
|
|
|
echo 0xff > assign_domain
|
|
|
|
|
2020-01-28 18:37:27 +01:00
|
|
|
This is how the matrix is configured for Guest3::
|
2018-10-10 19:03:08 +02:00
|
|
|
|
|
|
|
echo 6 > assign_adapter
|
|
|
|
echo 0x47 > assign_domain
|
|
|
|
echo 0xff > assign_domain
|
|
|
|
|
2020-01-28 18:37:27 +01:00
|
|
|
5. Start Guest1::
|
2018-10-10 19:03:08 +02:00
|
|
|
|
2020-01-28 18:37:27 +01:00
|
|
|
/usr/bin/qemu-system-s390x ... -cpu host,ap=on,apqci=on,apft=on -device vfio-ap,sysfsdev=/sys/devices/vfio_ap/matrix/$uuid1 ...
|
2018-10-10 19:03:08 +02:00
|
|
|
|
2020-01-28 18:37:27 +01:00
|
|
|
7. Start Guest2::
|
2018-10-10 19:03:08 +02:00
|
|
|
|
2020-01-28 18:37:27 +01:00
|
|
|
/usr/bin/qemu-system-s390x ... -cpu host,ap=on,apqci=on,apft=on -device vfio-ap,sysfsdev=/sys/devices/vfio_ap/matrix/$uuid2 ...
|
2018-10-10 19:03:08 +02:00
|
|
|
|
2020-01-28 18:37:27 +01:00
|
|
|
7. Start Guest3::
|
2018-10-10 19:03:08 +02:00
|
|
|
|
2020-01-28 18:37:27 +01:00
|
|
|
/usr/bin/qemu-system-s390x ... -cpu host,ap=on,apqci=on,apft=on -device vfio-ap,sysfsdev=/sys/devices/vfio_ap/matrix/$uuid3 ...
|
2018-10-10 19:03:08 +02:00
|
|
|
|
|
|
|
When the guest is shut down, the mediated matrix devices may be removed.
|
|
|
|
|
2020-01-28 18:37:27 +01:00
|
|
|
Using our example again, to remove the mediated matrix device $uuid1::
|
2018-10-10 19:03:08 +02:00
|
|
|
|
|
|
|
/sys/devices/vfio_ap/matrix/
|
2020-01-28 18:37:27 +01:00
|
|
|
... [mdev_supported_types]
|
|
|
|
...... [vfio_ap-passthrough]
|
|
|
|
......... [devices]
|
|
|
|
............ [$uuid1]
|
|
|
|
............... remove
|
2018-10-10 19:03:08 +02:00
|
|
|
|
|
|
|
|
|
|
|
echo 1 > remove
|
|
|
|
|
2020-01-28 18:37:27 +01:00
|
|
|
This will remove all of the mdev matrix device's sysfs structures including
|
|
|
|
the mdev device itself. To recreate and reconfigure the mdev matrix device,
|
|
|
|
all of the steps starting with step 3 will have to be performed again. Note
|
|
|
|
that the remove will fail if a guest using the mdev is still running.
|
2018-10-10 19:03:08 +02:00
|
|
|
|
2020-01-28 18:37:27 +01:00
|
|
|
It is not necessary to remove an mdev matrix device, but one may want to
|
|
|
|
remove it if no guest will use it during the remaining lifetime of the linux
|
|
|
|
host. If the mdev matrix device is removed, one may want to also reconfigure
|
|
|
|
the pool of adapters and queues reserved for use by the default drivers.
|
2018-10-10 19:03:08 +02:00
|
|
|
|
|
|
|
Limitations
|
2020-01-28 18:37:27 +01:00
|
|
|
-----------
|
|
|
|
|
2018-10-10 19:03:08 +02:00
|
|
|
* The KVM/kernel interfaces do not provide a way to prevent restoring an APQN
|
|
|
|
to the default drivers pool of a queue that is still assigned to a mediated
|
|
|
|
device in use by a guest. It is incumbent upon the administrator to
|
|
|
|
ensure there is no mediated device in use by a guest to which the APQN is
|
|
|
|
assigned lest the host be given access to the private data of the AP queue
|
|
|
|
device, such as a private key configured specifically for the guest.
|
|
|
|
|
2019-02-18 20:49:57 +01:00
|
|
|
* Dynamically assigning AP resources to or unassigning AP resources from a
|
2020-01-28 18:37:27 +01:00
|
|
|
mediated matrix device - see `Configuring an AP matrix for a linux guest`_
|
2019-02-18 20:49:57 +01:00
|
|
|
section above - while a running guest is using it is currently not supported.
|
2018-10-10 19:03:08 +02:00
|
|
|
|
2019-02-18 20:49:57 +01:00
|
|
|
* Live guest migration is not supported for guests using AP devices. If a guest
|
|
|
|
is using AP devices, the vfio-ap device configured for the guest must be
|
2020-01-28 18:37:27 +01:00
|
|
|
unplugged before migrating the guest (see `Hot unplug a vfio-ap device from a
|
|
|
|
running guest`_ section above.)
|