diff --git a/.gitignore b/.gitignore index 64e946696c..0fe114d251 100644 --- a/.gitignore +++ b/.gitignore @@ -82,7 +82,6 @@ fsdev/virtfs-proxy-helper.pod *.swp *.orig .pc -*.patch *.gcda *.gcno patches diff --git a/Makefile b/Makefile index 306e7bd4b5..3cfa7d0f75 100644 --- a/Makefile +++ b/Makefile @@ -306,10 +306,13 @@ install-doc: $(DOCS) $(INSTALL_DATA) QMP/qmp-commands.txt "$(DESTDIR)$(qemu_docdir)" ifdef CONFIG_POSIX $(INSTALL_DIR) "$(DESTDIR)$(mandir)/man1" - $(INSTALL_DATA) qemu.1 qemu-img.1 "$(DESTDIR)$(mandir)/man1" + $(INSTALL_DATA) qemu.1 "$(DESTDIR)$(mandir)/man1" +ifneq ($(TOOLS),) + $(INSTALL_DATA) qemu-img.1 "$(DESTDIR)$(mandir)/man1" $(INSTALL_DIR) "$(DESTDIR)$(mandir)/man8" $(INSTALL_DATA) qemu-nbd.8 "$(DESTDIR)$(mandir)/man8" endif +endif ifdef CONFIG_VIRTFS $(INSTALL_DIR) "$(DESTDIR)$(mandir)/man1" $(INSTALL_DATA) fsdev/virtfs-proxy-helper.1 "$(DESTDIR)$(mandir)/man1" diff --git a/block/curl.c b/block/curl.c index b8935fd991..4dc3b4b71b 100644 --- a/block/curl.c +++ b/block/curl.c @@ -462,8 +462,8 @@ static int curl_open(BlockDriverState *bs, QDict *options, int flags) // initialize the multi interface! s->multi = curl_multi_init(); - curl_multi_setopt( s->multi, CURLMOPT_SOCKETDATA, s); - curl_multi_setopt( s->multi, CURLMOPT_SOCKETFUNCTION, curl_sock_cb ); + curl_multi_setopt(s->multi, CURLMOPT_SOCKETDATA, s); + curl_multi_setopt(s->multi, CURLMOPT_SOCKETFUNCTION, curl_sock_cb); curl_multi_do(s); qemu_opts_del(opts); diff --git a/configure b/configure index 05a7880495..60b0811706 100755 --- a/configure +++ b/configure @@ -558,7 +558,9 @@ esac if [ "$bsd" = "yes" ] ; then if [ "$darwin" != "yes" ] ; then - usb="bsd" + if [ "$targetos" != "FreeBSD" ]; then + usb="bsd" + fi bsd_user="yes" fi fi @@ -3538,7 +3540,6 @@ echo "-> Your SDL version is too old - please upgrade to have SDL support" fi config_host_mak="config-host.mak" -config_host_ld="config-host.ld" echo "# Automatically generated by configure - do not modify" >config-all-disas.mak @@ -4050,7 +4051,7 @@ if test "$gcov" = "yes" ; then fi # generate list of library paths for linker script -$ld --verbose -v 2> /dev/null | grep SEARCH_DIR > ${config_host_ld} +$ld --verbose -v 2> /dev/null | grep SEARCH_DIR > config-host.ld # use included Linux headers if test "$linux" = "yes" ; then diff --git a/cputlb.c b/cputlb.c index 86666c8d57..1230e9e8ff 100644 --- a/cputlb.c +++ b/cputlb.c @@ -262,8 +262,8 @@ void tlb_set_page(CPUArchState *env, target_ulong vaddr, #if defined(DEBUG_TLB) printf("tlb_set_page: vaddr=" TARGET_FMT_lx " paddr=0x" TARGET_FMT_plx - " prot=%x idx=%d pd=0x%08lx\n", - vaddr, paddr, prot, mmu_idx, pd); + " prot=%x idx=%d\n", + vaddr, paddr, prot, mmu_idx); #endif address = vaddr; diff --git a/device_tree.c b/device_tree.c index 56af24b397..69be9da8e4 100644 --- a/device_tree.c +++ b/device_tree.c @@ -213,7 +213,7 @@ uint32_t qemu_devtree_get_phandle(void *fdt, const char *path) uint32_t r; r = fdt_get_phandle(fdt, findnode_nofail(fdt, path)); - if (r <= 0) { + if (r == 0) { fprintf(stderr, "%s: Couldn't get phandle for %s: %s\n", __func__, path, fdt_strerror(r)); exit(1); diff --git a/hw/acpi/piix4.c b/hw/acpi/piix4.c index e6525ac3ba..756df3bee2 100644 --- a/hw/acpi/piix4.c +++ b/hw/acpi/piix4.c @@ -518,7 +518,7 @@ static uint64_t gpe_readb(void *opaque, hwaddr addr, unsigned width) PIIX4PMState *s = opaque; uint32_t val = acpi_gpe_ioport_readb(&s->ar, addr); - PIIX4_DPRINTF("gpe read %x == %x\n", addr, val); + PIIX4_DPRINTF("gpe read %" HWADDR_PRIx " == %" PRIu32 "\n", addr, val); return val; } @@ -530,7 +530,7 @@ static void gpe_writeb(void *opaque, hwaddr addr, uint64_t val, acpi_gpe_ioport_writeb(&s->ar, addr, val); pm_update_sci(s); - PIIX4_DPRINTF("gpe write %x <== %d\n", addr, val); + PIIX4_DPRINTF("gpe write %" HWADDR_PRIx " <== %" PRIu64 "\n", addr, val); } static const MemoryRegionOps piix4_gpe_ops = { @@ -553,15 +553,15 @@ static uint64_t pci_read(void *opaque, hwaddr addr, unsigned int size) /* Manufacture an "up" value to cause a device check on any hotplug * slot with a device. Extra device checks are harmless. */ val = s->pci0_slot_device_present & s->pci0_hotplug_enable; - PIIX4_DPRINTF("pci_up_read %x\n", val); + PIIX4_DPRINTF("pci_up_read %" PRIu32 "\n", val); break; case PCI_DOWN_BASE - PCI_HOTPLUG_ADDR: val = s->pci0_status.down; - PIIX4_DPRINTF("pci_down_read %x\n", val); + PIIX4_DPRINTF("pci_down_read %" PRIu32 "\n", val); break; case PCI_EJ_BASE - PCI_HOTPLUG_ADDR: /* No feature defined yet */ - PIIX4_DPRINTF("pci_features_read %x\n", val); + PIIX4_DPRINTF("pci_features_read %" PRIu32 "\n", val); break; case PCI_RMV_BASE - PCI_HOTPLUG_ADDR: val = s->pci0_hotplug_enable; @@ -579,7 +579,7 @@ static void pci_write(void *opaque, hwaddr addr, uint64_t data, switch (addr) { case PCI_EJ_BASE - PCI_HOTPLUG_ADDR: acpi_piix_eject_slot(opaque, (uint32_t)data); - PIIX4_DPRINTF("pciej write %" HWADDR_PRIx " <== % " PRIu64 "\n", + PIIX4_DPRINTF("pciej write %" HWADDR_PRIx " <== %" PRIu64 "\n", addr, data); break; default: diff --git a/hw/char/serial.c b/hw/char/serial.c index 66b6348867..017610eb45 100644 --- a/hw/char/serial.c +++ b/hw/char/serial.c @@ -92,8 +92,6 @@ #define UART_FCR_RFR 0x02 /* RCVR Fifo Reset */ #define UART_FCR_FE 0x01 /* FIFO Enable */ -#define XMIT_FIFO 0 -#define RECV_FIFO 1 #define MAX_XMIT_RETRY 4 #ifdef DEBUG_SERIAL @@ -106,50 +104,14 @@ do {} while (0) static void serial_receive1(void *opaque, const uint8_t *buf, int size); -static void fifo_clear(SerialState *s, int fifo) +static inline void recv_fifo_put(SerialState *s, uint8_t chr) { - SerialFIFO *f = (fifo) ? &s->recv_fifo : &s->xmit_fifo; - memset(f->data, 0, UART_FIFO_LENGTH); - f->count = 0; - f->head = 0; - f->tail = 0; -} - -static int fifo_put(SerialState *s, int fifo, uint8_t chr) -{ - SerialFIFO *f = (fifo) ? &s->recv_fifo : &s->xmit_fifo; - /* Receive overruns do not overwrite FIFO contents. */ - if (fifo == XMIT_FIFO || f->count < UART_FIFO_LENGTH) { - - f->data[f->head++] = chr; - - if (f->head == UART_FIFO_LENGTH) - f->head = 0; - } - - if (f->count < UART_FIFO_LENGTH) - f->count++; - else if (fifo == RECV_FIFO) + if (!fifo8_is_full(&s->recv_fifo)) { + fifo8_push(&s->recv_fifo, chr); + } else { s->lsr |= UART_LSR_OE; - - return 1; -} - -static uint8_t fifo_get(SerialState *s, int fifo) -{ - SerialFIFO *f = (fifo) ? &s->recv_fifo : &s->xmit_fifo; - uint8_t c; - - if(f->count == 0) - return 0; - - c = f->data[f->tail++]; - if (f->tail == UART_FIFO_LENGTH) - f->tail = 0; - f->count--; - - return c; + } } static void serial_update_irq(SerialState *s) @@ -165,7 +127,7 @@ static void serial_update_irq(SerialState *s) tmp_iir = UART_IIR_CTI; } else if ((s->ier & UART_IER_RDI) && (s->lsr & UART_LSR_DR) && (!(s->fcr & UART_FCR_FE) || - s->recv_fifo.count >= s->recv_fifo.itl)) { + s->recv_fifo.num >= s->recv_fifo_itl)) { tmp_iir = UART_IIR_RDI; } else if ((s->ier & UART_IER_THRI) && s->thr_ipending) { tmp_iir = UART_IIR_THRI; @@ -262,9 +224,11 @@ static gboolean serial_xmit(GIOChannel *chan, GIOCondition cond, void *opaque) if (s->tsr_retry <= 0) { if (s->fcr & UART_FCR_FE) { - s->tsr = fifo_get(s,XMIT_FIFO); - if (!s->xmit_fifo.count) + s->tsr = fifo8_is_full(&s->xmit_fifo) ? + 0 : fifo8_pop(&s->xmit_fifo); + if (!s->xmit_fifo.num) { s->lsr |= UART_LSR_THRE; + } } else if ((s->lsr & UART_LSR_THRE)) { return FALSE; } else { @@ -316,16 +280,16 @@ static void serial_ioport_write(void *opaque, hwaddr addr, uint64_t val, } else { s->thr = (uint8_t) val; if(s->fcr & UART_FCR_FE) { - fifo_put(s, XMIT_FIFO, s->thr); - s->thr_ipending = 0; + /* xmit overruns overwrite data, so make space if needed */ + if (fifo8_is_full(&s->xmit_fifo)) { + fifo8_pop(&s->xmit_fifo); + } + fifo8_push(&s->xmit_fifo, s->thr); s->lsr &= ~UART_LSR_TEMT; - s->lsr &= ~UART_LSR_THRE; - serial_update_irq(s); - } else { - s->thr_ipending = 0; - s->lsr &= ~UART_LSR_THRE; - serial_update_irq(s); } + s->thr_ipending = 0; + s->lsr &= ~UART_LSR_THRE; + serial_update_irq(s); serial_xmit(NULL, G_IO_OUT, s); } break; @@ -367,28 +331,28 @@ static void serial_ioport_write(void *opaque, hwaddr addr, uint64_t val, if (val & UART_FCR_RFR) { qemu_del_timer(s->fifo_timeout_timer); s->timeout_ipending=0; - fifo_clear(s,RECV_FIFO); + fifo8_reset(&s->recv_fifo); } if (val & UART_FCR_XFR) { - fifo_clear(s,XMIT_FIFO); + fifo8_reset(&s->xmit_fifo); } if (val & UART_FCR_FE) { s->iir |= UART_IIR_FE; - /* Set RECV_FIFO trigger Level */ + /* Set recv_fifo trigger Level */ switch (val & 0xC0) { case UART_FCR_ITL_1: - s->recv_fifo.itl = 1; + s->recv_fifo_itl = 1; break; case UART_FCR_ITL_2: - s->recv_fifo.itl = 4; + s->recv_fifo_itl = 4; break; case UART_FCR_ITL_3: - s->recv_fifo.itl = 8; + s->recv_fifo_itl = 8; break; case UART_FCR_ITL_4: - s->recv_fifo.itl = 14; + s->recv_fifo_itl = 14; break; } } else @@ -460,11 +424,13 @@ static uint64_t serial_ioport_read(void *opaque, hwaddr addr, unsigned size) ret = s->divider & 0xff; } else { if(s->fcr & UART_FCR_FE) { - ret = fifo_get(s,RECV_FIFO); - if (s->recv_fifo.count == 0) + ret = fifo8_is_full(&s->recv_fifo) ? + 0 : fifo8_pop(&s->recv_fifo); + if (s->recv_fifo.num == 0) { s->lsr &= ~(UART_LSR_DR | UART_LSR_BI); - else + } else { qemu_mod_timer(s->fifo_timeout_timer, qemu_get_clock_ns (vm_clock) + s->char_transmit_time * 4); + } s->timeout_ipending = 0; } else { ret = s->rbr; @@ -534,15 +500,21 @@ static uint64_t serial_ioport_read(void *opaque, hwaddr addr, unsigned size) static int serial_can_receive(SerialState *s) { if(s->fcr & UART_FCR_FE) { - if(s->recv_fifo.count < UART_FIFO_LENGTH) - /* Advertise (fifo.itl - fifo.count) bytes when count < ITL, and 1 if above. If UART_FIFO_LENGTH - fifo.count is - advertised the effect will be to almost always fill the fifo completely before the guest has a chance to respond, - effectively overriding the ITL that the guest has set. */ - return (s->recv_fifo.count <= s->recv_fifo.itl) ? s->recv_fifo.itl - s->recv_fifo.count : 1; - else - return 0; + if (s->recv_fifo.num < UART_FIFO_LENGTH) { + /* + * Advertise (fifo.itl - fifo.count) bytes when count < ITL, and 1 + * if above. If UART_FIFO_LENGTH - fifo.count is advertised the + * effect will be to almost always fill the fifo completely before + * the guest has a chance to respond, effectively overriding the ITL + * that the guest has set. + */ + return (s->recv_fifo.num <= s->recv_fifo_itl) ? + s->recv_fifo_itl - s->recv_fifo.num : 1; + } else { + return 0; + } } else { - return !(s->lsr & UART_LSR_DR); + return !(s->lsr & UART_LSR_DR); } } @@ -550,7 +522,7 @@ static void serial_receive_break(SerialState *s) { s->rbr = 0; /* When the LSR_DR is set a null byte is pushed into the fifo */ - fifo_put(s, RECV_FIFO, '\0'); + recv_fifo_put(s, '\0'); s->lsr |= UART_LSR_BI | UART_LSR_DR; serial_update_irq(s); } @@ -558,7 +530,7 @@ static void serial_receive_break(SerialState *s) /* There's data in recv_fifo and s->rbr has not been read for 4 char transmit times */ static void fifo_timeout_int (void *opaque) { SerialState *s = opaque; - if (s->recv_fifo.count) { + if (s->recv_fifo.num) { s->timeout_ipending = 1; serial_update_irq(s); } @@ -580,7 +552,7 @@ static void serial_receive1(void *opaque, const uint8_t *buf, int size) if(s->fcr & UART_FCR_FE) { int i; for (i = 0; i < size; i++) { - fifo_put(s, RECV_FIFO, buf[i]); + recv_fifo_put(s, buf[i]); } s->lsr |= UART_LSR_DR; /* call the timeout receive callback in 4 char transmit time */ @@ -660,8 +632,8 @@ static void serial_reset(void *opaque) s->char_transmit_time = (get_ticks_per_sec() / 9600) * 10; s->poll_msl = 0; - fifo_clear(s,RECV_FIFO); - fifo_clear(s,XMIT_FIFO); + fifo8_reset(&s->recv_fifo); + fifo8_reset(&s->xmit_fifo); s->last_xmit_ts = qemu_get_clock_ns(vm_clock); @@ -684,6 +656,8 @@ void serial_init_core(SerialState *s) qemu_chr_add_handlers(s->chr, serial_can_receive1, serial_receive1, serial_event, s); + fifo8_create(&s->recv_fifo, UART_FIFO_LENGTH); + fifo8_create(&s->xmit_fifo, UART_FIFO_LENGTH); } void serial_exit_core(SerialState *s) diff --git a/hw/intc/xilinx_intc.c b/hw/intc/xilinx_intc.c index b106e724ab..5df7008e2f 100644 --- a/hw/intc/xilinx_intc.c +++ b/hw/intc/xilinx_intc.c @@ -66,11 +66,7 @@ static void update_irq(struct xlx_pic *p) i = ~0; p->regs[R_IVR] = i; - if ((p->regs[R_MER] & 1) && p->regs[R_IPR]) { - qemu_irq_raise(p->parent_irq); - } else { - qemu_irq_lower(p->parent_irq); - } + qemu_set_irq(p->parent_irq, (p->regs[R_MER] & 1) && p->regs[R_IPR]); } static uint64_t diff --git a/hw/misc/ivshmem.c b/hw/misc/ivshmem.c index a19a6d6d8c..5658f733f4 100644 --- a/hw/misc/ivshmem.c +++ b/hw/misc/ivshmem.c @@ -735,6 +735,7 @@ static int pci_ivshmem_init(PCIDevice *dev) if (s->shmobj == NULL) { fprintf(stderr, "Must specify 'chardev' or 'shm' to ivshmem\n"); + exit(1); } IVSHMEM_DPRINTF("using shm_open (shm object = %s)\n", s->shmobj); diff --git a/hw/scsi/vmw_pvscsi.c b/hw/scsi/vmw_pvscsi.c index 48d12f42dd..446f72374b 100644 --- a/hw/scsi/vmw_pvscsi.c +++ b/hw/scsi/vmw_pvscsi.c @@ -389,7 +389,7 @@ pvscsi_process_completion_queue(void *opaque) QTAILQ_REMOVE(&s->completion_queue, pvscsi_req, next); pvscsi_cmp_ring_put(s, &pvscsi_req->cmp); g_free(pvscsi_req); - has_completed++; + has_completed = true; } if (has_completed) { diff --git a/hw/xen/xen_pt_config_init.c b/hw/xen/xen_pt_config_init.c index 01872db5b7..8ccc2e4b9c 100644 --- a/hw/xen/xen_pt_config_init.c +++ b/hw/xen/xen_pt_config_init.c @@ -1777,12 +1777,12 @@ static int xen_pt_config_reg_init(XenPCIPassthroughState *s, rc = reg->init(s, reg_entry->reg, reg_grp->base_offset + reg->offset, &data); if (rc < 0) { - free(reg_entry); + g_free(reg_entry); return rc; } if (data == XEN_PT_INVALID_REG) { /* free unused BAR register entry */ - free(reg_entry); + g_free(reg_entry); return 0; } /* set register value */ diff --git a/include/hw/char/serial.h b/include/hw/char/serial.h index bca79f17b5..9ab81f6321 100644 --- a/include/hw/char/serial.h +++ b/include/hw/char/serial.h @@ -28,17 +28,10 @@ #include "hw/hw.h" #include "sysemu/sysemu.h" #include "exec/memory.h" +#include "qemu/fifo8.h" #define UART_FIFO_LENGTH 16 /* 16550A Fifo Length */ -typedef struct SerialFIFO { - uint8_t data[UART_FIFO_LENGTH]; - uint8_t count; - uint8_t itl; /* Interrupt Trigger Level */ - uint8_t tail; - uint8_t head; -} SerialFIFO; - struct SerialState { uint16_t divider; uint8_t rbr; /* receive register */ @@ -67,8 +60,10 @@ struct SerialState { /* Time when the last byte was successfully sent out of the tsr */ uint64_t last_xmit_ts; - SerialFIFO recv_fifo; - SerialFIFO xmit_fifo; + Fifo8 recv_fifo; + Fifo8 xmit_fifo; + /* Interrupt trigger level for recv_fifo */ + uint8_t recv_fifo_itl; struct QEMUTimer *fifo_timeout_timer; int timeout_ipending; /* timeout interrupt pending state */ diff --git a/include/qemu-common.h b/include/qemu-common.h index ed8b6e2005..3c913758c9 100644 --- a/include/qemu-common.h +++ b/include/qemu-common.h @@ -42,19 +42,6 @@ #include #include "glib-compat.h" -#if defined(__GLIBC__) -# include -#elif defined CONFIG_BSD -# include -# if defined(__FreeBSD__) || defined(__FreeBSD_kernel__) || defined(__DragonFly__) -# include -# else -# include -# endif -#elif defined CONFIG_SOLARIS -# include -#endif - #ifdef _WIN32 #include "sysemu/os-win32.h" #endif @@ -235,6 +222,8 @@ ssize_t qemu_recv_full(int fd, void *buf, size_t count, int flags) #ifndef _WIN32 int qemu_pipe(int pipefd[2]); +/* like openpty() but also makes it raw; return master fd */ +int qemu_openpty_raw(int *aslave, char *pty_name); #endif #ifdef _WIN32 diff --git a/include/ui/console.h b/include/ui/console.h index 4307b5fe88..f1d79f92a4 100644 --- a/include/ui/console.h +++ b/include/ui/console.h @@ -339,6 +339,6 @@ int index_from_keycode(int code); /* gtk.c */ void early_gtk_display_init(void); -void gtk_display_init(DisplayState *ds); +void gtk_display_init(DisplayState *ds, bool full_screen); #endif diff --git a/libcacard/vscclient.c b/libcacard/vscclient.c index ac23647236..5180d2945a 100644 --- a/libcacard/vscclient.c +++ b/libcacard/vscclient.c @@ -618,18 +618,22 @@ connect_to_qemu( if (ret != 0) { /* Error */ fprintf(stderr, "getaddrinfo failed\n"); - return -1; + goto cleanup_socket; } if (connect(sock, server->ai_addr, server->ai_addrlen) < 0) { /* Error */ fprintf(stderr, "Could not connect\n"); - return -1; + goto cleanup_socket; } if (verbose) { printf("Connected (sizeof Header=%zd)!\n", sizeof(VSCMsgHeader)); } return sock; + +cleanup_socket: + closesocket(sock); + return -1; } int @@ -759,5 +763,6 @@ main( g_io_channel_unref(channel_socket); g_byte_array_unref(socket_to_send); + closesocket(sock); return 0; } diff --git a/linux-headers/asm-arm/kvm.h b/linux-headers/asm-arm/kvm.h index 023bfeb367..c1ee007523 100644 --- a/linux-headers/asm-arm/kvm.h +++ b/linux-headers/asm-arm/kvm.h @@ -53,12 +53,12 @@ #define KVM_ARM_FIQ_spsr fiq_regs[7] struct kvm_regs { - struct pt_regs usr_regs;/* R0_usr - R14_usr, PC, CPSR */ - __u32 svc_regs[3]; /* SP_svc, LR_svc, SPSR_svc */ - __u32 abt_regs[3]; /* SP_abt, LR_abt, SPSR_abt */ - __u32 und_regs[3]; /* SP_und, LR_und, SPSR_und */ - __u32 irq_regs[3]; /* SP_irq, LR_irq, SPSR_irq */ - __u32 fiq_regs[8]; /* R8_fiq - R14_fiq, SPSR_fiq */ + struct pt_regs usr_regs; /* R0_usr - R14_usr, PC, CPSR */ + unsigned long svc_regs[3]; /* SP_svc, LR_svc, SPSR_svc */ + unsigned long abt_regs[3]; /* SP_abt, LR_abt, SPSR_abt */ + unsigned long und_regs[3]; /* SP_und, LR_und, SPSR_und */ + unsigned long irq_regs[3]; /* SP_irq, LR_irq, SPSR_irq */ + unsigned long fiq_regs[8]; /* R8_fiq - R14_fiq, SPSR_fiq */ }; /* Supported Processor Types */ diff --git a/linux-headers/asm-mips/kvm.h b/linux-headers/asm-mips/kvm.h new file mode 100644 index 0000000000..3f424f5217 --- /dev/null +++ b/linux-headers/asm-mips/kvm.h @@ -0,0 +1,138 @@ +/* + * This file is subject to the terms and conditions of the GNU General Public + * License. See the file "COPYING" in the main directory of this archive + * for more details. + * + * Copyright (C) 2012 MIPS Technologies, Inc. All rights reserved. + * Copyright (C) 2013 Cavium, Inc. + * Authors: Sanjay Lal + */ + +#ifndef __LINUX_KVM_MIPS_H +#define __LINUX_KVM_MIPS_H + +#include + +/* + * KVM MIPS specific structures and definitions. + * + * Some parts derived from the x86 version of this file. + */ + +/* + * for KVM_GET_REGS and KVM_SET_REGS + * + * If Config[AT] is zero (32-bit CPU), the register contents are + * stored in the lower 32-bits of the struct kvm_regs fields and sign + * extended to 64-bits. + */ +struct kvm_regs { + /* out (KVM_GET_REGS) / in (KVM_SET_REGS) */ + __u64 gpr[32]; + __u64 hi; + __u64 lo; + __u64 pc; +}; + +/* + * for KVM_GET_FPU and KVM_SET_FPU + * + * If Status[FR] is zero (32-bit FPU), the upper 32-bits of the FPRs + * are zero filled. + */ +struct kvm_fpu { + __u64 fpr[32]; + __u32 fir; + __u32 fccr; + __u32 fexr; + __u32 fenr; + __u32 fcsr; + __u32 pad; +}; + + +/* + * For MIPS, we use KVM_SET_ONE_REG and KVM_GET_ONE_REG to access CP0 + * registers. The id field is broken down as follows: + * + * bits[2..0] - Register 'sel' index. + * bits[7..3] - Register 'rd' index. + * bits[15..8] - Must be zero. + * bits[63..16] - 1 -> CP0 registers. + * + * Other sets registers may be added in the future. Each set would + * have its own identifier in bits[63..16]. + * + * The addr field of struct kvm_one_reg must point to an aligned + * 64-bit wide location. For registers that are narrower than + * 64-bits, the value is stored in the low order bits of the location, + * and sign extended to 64-bits. + * + * The registers defined in struct kvm_regs are also accessible, the + * id values for these are below. + */ + +#define KVM_REG_MIPS_R0 0 +#define KVM_REG_MIPS_R1 1 +#define KVM_REG_MIPS_R2 2 +#define KVM_REG_MIPS_R3 3 +#define KVM_REG_MIPS_R4 4 +#define KVM_REG_MIPS_R5 5 +#define KVM_REG_MIPS_R6 6 +#define KVM_REG_MIPS_R7 7 +#define KVM_REG_MIPS_R8 8 +#define KVM_REG_MIPS_R9 9 +#define KVM_REG_MIPS_R10 10 +#define KVM_REG_MIPS_R11 11 +#define KVM_REG_MIPS_R12 12 +#define KVM_REG_MIPS_R13 13 +#define KVM_REG_MIPS_R14 14 +#define KVM_REG_MIPS_R15 15 +#define KVM_REG_MIPS_R16 16 +#define KVM_REG_MIPS_R17 17 +#define KVM_REG_MIPS_R18 18 +#define KVM_REG_MIPS_R19 19 +#define KVM_REG_MIPS_R20 20 +#define KVM_REG_MIPS_R21 21 +#define KVM_REG_MIPS_R22 22 +#define KVM_REG_MIPS_R23 23 +#define KVM_REG_MIPS_R24 24 +#define KVM_REG_MIPS_R25 25 +#define KVM_REG_MIPS_R26 26 +#define KVM_REG_MIPS_R27 27 +#define KVM_REG_MIPS_R28 28 +#define KVM_REG_MIPS_R29 29 +#define KVM_REG_MIPS_R30 30 +#define KVM_REG_MIPS_R31 31 + +#define KVM_REG_MIPS_HI 32 +#define KVM_REG_MIPS_LO 33 +#define KVM_REG_MIPS_PC 34 + +/* + * KVM MIPS specific structures and definitions + * + */ +struct kvm_debug_exit_arch { + __u64 epc; +}; + +/* for KVM_SET_GUEST_DEBUG */ +struct kvm_guest_debug_arch { +}; + +/* definition of registers in kvm_run */ +struct kvm_sync_regs { +}; + +/* dummy definition */ +struct kvm_sregs { +}; + +struct kvm_mips_interrupt { + /* in */ + __u32 cpu; + __u32 irq; +}; + +#endif /* __LINUX_KVM_MIPS_H */ diff --git a/linux-headers/asm-mips/kvm_para.h b/linux-headers/asm-mips/kvm_para.h new file mode 100644 index 0000000000..14fab8f0b9 --- /dev/null +++ b/linux-headers/asm-mips/kvm_para.h @@ -0,0 +1 @@ +#include diff --git a/linux-headers/asm-powerpc/kvm.h b/linux-headers/asm-powerpc/kvm.h index ef072b1a6e..0fb1a6e9ff 100644 --- a/linux-headers/asm-powerpc/kvm.h +++ b/linux-headers/asm-powerpc/kvm.h @@ -25,6 +25,8 @@ /* Select powerpc specific features in */ #define __KVM_HAVE_SPAPR_TCE #define __KVM_HAVE_PPC_SMT +#define __KVM_HAVE_IRQCHIP +#define __KVM_HAVE_IRQ_LINE struct kvm_regs { __u64 pc; @@ -272,8 +274,31 @@ struct kvm_debug_exit_arch { /* for KVM_SET_GUEST_DEBUG */ struct kvm_guest_debug_arch { + struct { + /* H/W breakpoint/watchpoint address */ + __u64 addr; + /* + * Type denotes h/w breakpoint, read watchpoint, write + * watchpoint or watchpoint (both read and write). + */ +#define KVMPPC_DEBUG_NONE 0x0 +#define KVMPPC_DEBUG_BREAKPOINT (1UL << 1) +#define KVMPPC_DEBUG_WATCH_WRITE (1UL << 2) +#define KVMPPC_DEBUG_WATCH_READ (1UL << 3) + __u32 type; + __u32 reserved; + } bp[16]; }; +/* Debug related defines */ +/* + * kvm_guest_debug->control is a 32 bit field. The lower 16 bits are generic + * and upper 16 bits are architecture specific. Architecture specific defines + * that ioctl is for setting hardware breakpoint or software breakpoint. + */ +#define KVM_GUESTDBG_USE_SW_BP 0x00010000 +#define KVM_GUESTDBG_USE_HW_BP 0x00020000 + /* definition of registers in kvm_run */ struct kvm_sync_regs { }; @@ -299,6 +324,12 @@ struct kvm_allocate_rma { __u64 rma_size; }; +/* for KVM_CAP_PPC_RTAS */ +struct kvm_rtas_token_args { + char name[120]; + __u64 token; /* Use a token of 0 to undefine a mapping */ +}; + struct kvm_book3e_206_tlb_entry { __u32 mas8; __u32 mas1; @@ -359,6 +390,26 @@ struct kvm_get_htab_header { __u16 n_invalid; }; +/* Per-vcpu XICS interrupt controller state */ +#define KVM_REG_PPC_ICP_STATE (KVM_REG_PPC | KVM_REG_SIZE_U64 | 0x8c) + +#define KVM_REG_PPC_ICP_CPPR_SHIFT 56 /* current proc priority */ +#define KVM_REG_PPC_ICP_CPPR_MASK 0xff +#define KVM_REG_PPC_ICP_XISR_SHIFT 32 /* interrupt status field */ +#define KVM_REG_PPC_ICP_XISR_MASK 0xffffff +#define KVM_REG_PPC_ICP_MFRR_SHIFT 24 /* pending IPI priority */ +#define KVM_REG_PPC_ICP_MFRR_MASK 0xff +#define KVM_REG_PPC_ICP_PPRI_SHIFT 16 /* pending irq priority */ +#define KVM_REG_PPC_ICP_PPRI_MASK 0xff + +/* Device control API: PPC-specific devices */ +#define KVM_DEV_MPIC_GRP_MISC 1 +#define KVM_DEV_MPIC_BASE_ADDR 0 /* 64-bit */ + +#define KVM_DEV_MPIC_GRP_REGISTER 2 /* 32-bit */ +#define KVM_DEV_MPIC_GRP_IRQ_ACTIVE 3 /* 32-bit */ + +/* One-Reg API: PPC-specific registers */ #define KVM_REG_PPC_HIOR (KVM_REG_PPC | KVM_REG_SIZE_U64 | 0x1) #define KVM_REG_PPC_IAC1 (KVM_REG_PPC | KVM_REG_SIZE_U64 | 0x2) #define KVM_REG_PPC_IAC2 (KVM_REG_PPC | KVM_REG_SIZE_U64 | 0x3) @@ -422,4 +473,42 @@ struct kvm_get_htab_header { #define KVM_REG_PPC_CLEAR_TSR (KVM_REG_PPC | KVM_REG_SIZE_U32 | 0x88) #define KVM_REG_PPC_TCR (KVM_REG_PPC | KVM_REG_SIZE_U32 | 0x89) #define KVM_REG_PPC_TSR (KVM_REG_PPC | KVM_REG_SIZE_U32 | 0x8a) + +/* Debugging: Special instruction for software breakpoint */ +#define KVM_REG_PPC_DEBUG_INST (KVM_REG_PPC | KVM_REG_SIZE_U32 | 0x8b) + +/* MMU registers */ +#define KVM_REG_PPC_MAS0 (KVM_REG_PPC | KVM_REG_SIZE_U32 | 0x8c) +#define KVM_REG_PPC_MAS1 (KVM_REG_PPC | KVM_REG_SIZE_U32 | 0x8d) +#define KVM_REG_PPC_MAS2 (KVM_REG_PPC | KVM_REG_SIZE_U64 | 0x8e) +#define KVM_REG_PPC_MAS7_3 (KVM_REG_PPC | KVM_REG_SIZE_U64 | 0x8f) +#define KVM_REG_PPC_MAS4 (KVM_REG_PPC | KVM_REG_SIZE_U32 | 0x90) +#define KVM_REG_PPC_MAS6 (KVM_REG_PPC | KVM_REG_SIZE_U32 | 0x91) +#define KVM_REG_PPC_MMUCFG (KVM_REG_PPC | KVM_REG_SIZE_U32 | 0x92) +/* + * TLBnCFG fields TLBnCFG_N_ENTRY and TLBnCFG_ASSOC can be changed only using + * KVM_CAP_SW_TLB ioctl + */ +#define KVM_REG_PPC_TLB0CFG (KVM_REG_PPC | KVM_REG_SIZE_U32 | 0x93) +#define KVM_REG_PPC_TLB1CFG (KVM_REG_PPC | KVM_REG_SIZE_U32 | 0x94) +#define KVM_REG_PPC_TLB2CFG (KVM_REG_PPC | KVM_REG_SIZE_U32 | 0x95) +#define KVM_REG_PPC_TLB3CFG (KVM_REG_PPC | KVM_REG_SIZE_U32 | 0x96) +#define KVM_REG_PPC_TLB0PS (KVM_REG_PPC | KVM_REG_SIZE_U32 | 0x97) +#define KVM_REG_PPC_TLB1PS (KVM_REG_PPC | KVM_REG_SIZE_U32 | 0x98) +#define KVM_REG_PPC_TLB2PS (KVM_REG_PPC | KVM_REG_SIZE_U32 | 0x99) +#define KVM_REG_PPC_TLB3PS (KVM_REG_PPC | KVM_REG_SIZE_U32 | 0x9a) +#define KVM_REG_PPC_EPTCFG (KVM_REG_PPC | KVM_REG_SIZE_U32 | 0x9b) + +/* PPC64 eXternal Interrupt Controller Specification */ +#define KVM_DEV_XICS_GRP_SOURCES 1 /* 64-bit source attributes */ + +/* Layout of 64-bit source attribute values */ +#define KVM_XICS_DESTINATION_SHIFT 0 +#define KVM_XICS_DESTINATION_MASK 0xffffffffULL +#define KVM_XICS_PRIORITY_SHIFT 32 +#define KVM_XICS_PRIORITY_MASK 0xff +#define KVM_XICS_LEVEL_SENSITIVE (1ULL << 40) +#define KVM_XICS_MASKED (1ULL << 41) +#define KVM_XICS_PENDING (1ULL << 42) + #endif /* __LINUX_KVM_POWERPC_H */ diff --git a/linux-headers/asm-x86/kvm.h b/linux-headers/asm-x86/kvm.h index a65ec29e6f..5d9a3033b3 100644 --- a/linux-headers/asm-x86/kvm.h +++ b/linux-headers/asm-x86/kvm.h @@ -29,7 +29,6 @@ #define __KVM_HAVE_PIT #define __KVM_HAVE_IOAPIC #define __KVM_HAVE_IRQ_LINE -#define __KVM_HAVE_DEVICE_ASSIGNMENT #define __KVM_HAVE_MSI #define __KVM_HAVE_USER_NMI #define __KVM_HAVE_GUEST_DEBUG diff --git a/linux-headers/linux/kvm.h b/linux-headers/linux/kvm.h index eb02d8a837..c614070662 100644 --- a/linux-headers/linux/kvm.h +++ b/linux-headers/linux/kvm.h @@ -561,9 +561,7 @@ struct kvm_ppc_smmu_info { #define KVM_CAP_MP_STATE 14 #define KVM_CAP_COALESCED_MMIO 15 #define KVM_CAP_SYNC_MMU 16 /* Changes to host mmap are reflected in guest */ -#ifdef __KVM_HAVE_DEVICE_ASSIGNMENT #define KVM_CAP_DEVICE_ASSIGNMENT 17 -#endif #define KVM_CAP_IOMMU 18 #ifdef __KVM_HAVE_MSI #define KVM_CAP_DEVICE_MSI 20 @@ -579,13 +577,9 @@ struct kvm_ppc_smmu_info { #ifdef __KVM_HAVE_PIT #define KVM_CAP_REINJECT_CONTROL 24 #endif -#ifdef __KVM_HAVE_IOAPIC #define KVM_CAP_IRQ_ROUTING 25 -#endif #define KVM_CAP_IRQ_INJECT_STATUS 26 -#ifdef __KVM_HAVE_DEVICE_ASSIGNMENT #define KVM_CAP_DEVICE_DEASSIGNMENT 27 -#endif #ifdef __KVM_HAVE_MSIX #define KVM_CAP_DEVICE_MSIX 28 #endif @@ -668,6 +662,10 @@ struct kvm_ppc_smmu_info { #define KVM_CAP_PPC_EPR 86 #define KVM_CAP_ARM_PSCI 87 #define KVM_CAP_ARM_SET_DEVICE_ADDR 88 +#define KVM_CAP_DEVICE_CTRL 89 +#define KVM_CAP_IRQ_MPIC 90 +#define KVM_CAP_PPC_RTAS 91 +#define KVM_CAP_IRQ_XICS 92 #ifdef KVM_CAP_IRQ_ROUTING @@ -820,6 +818,28 @@ struct kvm_arm_device_addr { __u64 addr; }; +/* + * Device control API, available with KVM_CAP_DEVICE_CTRL + */ +#define KVM_CREATE_DEVICE_TEST 1 + +struct kvm_create_device { + __u32 type; /* in: KVM_DEV_TYPE_xxx */ + __u32 fd; /* out: device handle */ + __u32 flags; /* in: KVM_CREATE_DEVICE_xxx */ +}; + +struct kvm_device_attr { + __u32 flags; /* no flags currently defined */ + __u32 group; /* device-defined */ + __u64 attr; /* group-defined */ + __u64 addr; /* userspace address of attr data */ +}; + +#define KVM_DEV_TYPE_FSL_MPIC_20 1 +#define KVM_DEV_TYPE_FSL_MPIC_42 2 +#define KVM_DEV_TYPE_XICS 3 + /* * ioctls for VM fds */ @@ -907,6 +927,16 @@ struct kvm_s390_ucas_mapping { #define KVM_PPC_GET_HTAB_FD _IOW(KVMIO, 0xaa, struct kvm_get_htab_fd) /* Available with KVM_CAP_ARM_SET_DEVICE_ADDR */ #define KVM_ARM_SET_DEVICE_ADDR _IOW(KVMIO, 0xab, struct kvm_arm_device_addr) +/* Available with KVM_CAP_PPC_RTAS */ +#define KVM_PPC_RTAS_DEFINE_TOKEN _IOW(KVMIO, 0xac, struct kvm_rtas_token_args) + +/* ioctl for vm fd */ +#define KVM_CREATE_DEVICE _IOWR(KVMIO, 0xe0, struct kvm_create_device) + +/* ioctls for fds returned by KVM_CREATE_DEVICE */ +#define KVM_SET_DEVICE_ATTR _IOW(KVMIO, 0xe1, struct kvm_device_attr) +#define KVM_GET_DEVICE_ATTR _IOW(KVMIO, 0xe2, struct kvm_device_attr) +#define KVM_HAS_DEVICE_ATTR _IOW(KVMIO, 0xe3, struct kvm_device_attr) /* * ioctls for vcpu fds diff --git a/linux-headers/linux/vfio.h b/linux-headers/linux/vfio.h index e094121ee7..7ec1864765 100644 --- a/linux-headers/linux/vfio.h +++ b/linux-headers/linux/vfio.h @@ -319,6 +319,7 @@ enum { VFIO_PCI_INTX_IRQ_INDEX, VFIO_PCI_MSI_IRQ_INDEX, VFIO_PCI_MSIX_IRQ_INDEX, + VFIO_PCI_ERR_IRQ_INDEX, VFIO_PCI_NUM_IRQS }; diff --git a/linux-headers/linux/vhost.h b/linux-headers/linux/vhost.h index 165a4848c6..c656f61cfc 100644 --- a/linux-headers/linux/vhost.h +++ b/linux-headers/linux/vhost.h @@ -127,4 +127,32 @@ struct vhost_memory { /* vhost-net should add virtio_net_hdr for RX, and strip for TX packets. */ #define VHOST_NET_F_VIRTIO_NET_HDR 27 +/* VHOST_SCSI specific definitions */ + +/* + * Used by QEMU userspace to ensure a consistent vhost-scsi ABI. + * + * ABI Rev 0: July 2012 version starting point for v3.6-rc merge candidate + + * RFC-v2 vhost-scsi userspace. Add GET_ABI_VERSION ioctl usage + * ABI Rev 1: January 2013. Ignore vhost_tpgt filed in struct vhost_scsi_target. + * All the targets under vhost_wwpn can be seen and used by guset. + */ + +#define VHOST_SCSI_ABI_VERSION 1 + +struct vhost_scsi_target { + int abi_version; + char vhost_wwpn[224]; /* TRANSPORT_IQN_LEN */ + unsigned short vhost_tpgt; + unsigned short reserved; +}; + +#define VHOST_SCSI_SET_ENDPOINT _IOW(VHOST_VIRTIO, 0x40, struct vhost_scsi_target) +#define VHOST_SCSI_CLEAR_ENDPOINT _IOW(VHOST_VIRTIO, 0x41, struct vhost_scsi_target) +/* Changing this breaks userspace. */ +#define VHOST_SCSI_GET_ABI_VERSION _IOW(VHOST_VIRTIO, 0x42, int) +/* Set and get the events missed flag */ +#define VHOST_SCSI_SET_EVENTS_MISSED _IOW(VHOST_VIRTIO, 0x43, __u32) +#define VHOST_SCSI_GET_EVENTS_MISSED _IOW(VHOST_VIRTIO, 0x44, __u32) + #endif diff --git a/main-loop.c b/main-loop.c index cf36645af4..a44fff6e9a 100644 --- a/main-loop.c +++ b/main-loop.c @@ -24,7 +24,8 @@ #include "qemu-common.h" #include "qemu/timer.h" -#include "slirp/slirp.h" +#include "qemu/sockets.h" // struct in_addr needed for libslirp.h +#include "slirp/libslirp.h" #include "qemu/main-loop.h" #include "block/aio.h" diff --git a/qemu-char.c b/qemu-char.c index 0b6ae95322..2c3cfe6b69 100644 --- a/qemu-char.c +++ b/qemu-char.c @@ -76,8 +76,6 @@ #include // must come after ip.h #include #include -#include -#include #endif #endif #endif @@ -966,63 +964,6 @@ static CharDriverState *qemu_chr_open_stdio(ChardevStdio *opts) return chr; } -#ifdef __sun__ -/* Once Solaris has openpty(), this is going to be removed. */ -static int openpty(int *amaster, int *aslave, char *name, - struct termios *termp, struct winsize *winp) -{ - const char *slave; - int mfd = -1, sfd = -1; - - *amaster = *aslave = -1; - - mfd = open("/dev/ptmx", O_RDWR | O_NOCTTY); - if (mfd < 0) - goto err; - - if (grantpt(mfd) == -1 || unlockpt(mfd) == -1) - goto err; - - if ((slave = ptsname(mfd)) == NULL) - goto err; - - if ((sfd = open(slave, O_RDONLY | O_NOCTTY)) == -1) - goto err; - - if (ioctl(sfd, I_PUSH, "ptem") == -1 || - (termp != NULL && tcgetattr(sfd, termp) < 0)) - goto err; - - if (amaster) - *amaster = mfd; - if (aslave) - *aslave = sfd; - if (winp) - ioctl(sfd, TIOCSWINSZ, winp); - - return 0; - -err: - if (sfd != -1) - close(sfd); - close(mfd); - return -1; -} - -static void cfmakeraw (struct termios *termios_p) -{ - termios_p->c_iflag &= - ~(IGNBRK|BRKINT|PARMRK|ISTRIP|INLCR|IGNCR|ICRNL|IXON); - termios_p->c_oflag &= ~OPOST; - termios_p->c_lflag &= ~(ECHO|ECHONL|ICANON|ISIG|IEXTEN); - termios_p->c_cflag &= ~(CSIZE|PARENB); - termios_p->c_cflag |= CS8; - - termios_p->c_cc[VMIN] = 0; - termios_p->c_cc[VTIME] = 0; -} -#endif - #if defined(__linux__) || defined(__sun__) || defined(__FreeBSD__) \ || defined(__NetBSD__) || defined(__OpenBSD__) || defined(__DragonFly__) \ || defined(__GLIBC__) @@ -1194,34 +1135,24 @@ static CharDriverState *qemu_chr_open_pty(const char *id, { CharDriverState *chr; PtyCharDriver *s; - struct termios tty; int master_fd, slave_fd; -#if defined(__OpenBSD__) || defined(__DragonFly__) char pty_name[PATH_MAX]; -#define q_ptsname(x) pty_name -#else - char *pty_name = NULL; -#define q_ptsname(x) ptsname(x) -#endif - if (openpty(&master_fd, &slave_fd, pty_name, NULL, NULL) < 0) { + master_fd = qemu_openpty_raw(&slave_fd, pty_name); + if (master_fd < 0) { return NULL; } - /* Set raw attributes on the pty. */ - tcgetattr(slave_fd, &tty); - cfmakeraw(&tty); - tcsetattr(slave_fd, TCSAFLUSH, &tty); close(slave_fd); chr = g_malloc0(sizeof(CharDriverState)); - chr->filename = g_strdup_printf("pty:%s", q_ptsname(master_fd)); - ret->pty = g_strdup(q_ptsname(master_fd)); + chr->filename = g_strdup_printf("pty:%s", pty_name); + ret->pty = g_strdup(pty_name); ret->has_pty = true; fprintf(stderr, "char device redirected to %s (label %s)\n", - q_ptsname(master_fd), id); + pty_name, id); s = g_malloc0(sizeof(PtyCharDriver)); chr->opaque = s; diff --git a/target-arm/kvm.c b/target-arm/kvm.c index b7bdc034fd..27dcab93f6 100644 --- a/target-arm/kvm.c +++ b/target-arm/kvm.c @@ -491,3 +491,7 @@ void kvm_arch_remove_all_hw_breakpoints(void) { qemu_log_mask(LOG_UNIMP, "%s: not implemented\n", __func__); } + +void kvm_arch_init_irq_routing(KVMState *s) +{ +} diff --git a/target-ppc/kvm.c b/target-ppc/kvm.c index 3ab2946cfb..2bbc3b81dd 100644 --- a/target-ppc/kvm.c +++ b/target-ppc/kvm.c @@ -1797,3 +1797,7 @@ int kvm_arch_on_sigbus(int code, void *addr) { return 1; } + +void kvm_arch_init_irq_routing(KVMState *s) +{ +} diff --git a/target-s390x/kvm.c b/target-s390x/kvm.c index 862fb12c84..4d9ac4ad0c 100644 --- a/target-s390x/kvm.c +++ b/target-s390x/kvm.c @@ -928,3 +928,7 @@ void kvm_s390_enable_css_support(S390CPU *cpu) r = kvm_vcpu_ioctl(CPU(cpu), KVM_ENABLE_CAP, &cap); assert(r == 0); } + +void kvm_arch_init_irq_routing(KVMState *s) +{ +} diff --git a/target-sparc/cpu.c b/target-sparc/cpu.c index 290b5809aa..13bb7bb94a 100644 --- a/target-sparc/cpu.c +++ b/target-sparc/cpu.c @@ -614,7 +614,7 @@ static int cpu_sparc_find_by_name(sparc_def_t *cpu_def, const char *cpu_model) return 0; error: - free(s); + g_free(s); return -1; } diff --git a/ui/gtk.c b/ui/gtk.c index 63f6081913..50a6993627 100644 --- a/ui/gtk.c +++ b/ui/gtk.c @@ -1160,8 +1160,7 @@ static GSList *gd_vc_init(GtkDisplayState *s, VirtualConsole *vc, int index, GSL GIOChannel *chan; GtkWidget *scrolled_window; GtkAdjustment *vadjustment; - int master_fd, slave_fd, ret; - struct termios tty; + int master_fd, slave_fd; snprintf(buffer, sizeof(buffer), "vc%d", index); snprintf(path, sizeof(path), "/View/VC%d", index); @@ -1181,13 +1180,8 @@ static GSList *gd_vc_init(GtkDisplayState *s, VirtualConsole *vc, int index, GSL vc->terminal = vte_terminal_new(); - ret = openpty(&master_fd, &slave_fd, NULL, NULL, NULL); - g_assert(ret != -1); - - /* Set raw attributes on the pty. */ - tcgetattr(slave_fd, &tty); - cfmakeraw(&tty); - tcsetattr(slave_fd, TCSAFLUSH, &tty); + master_fd = qemu_openpty_raw(&slave_fd, NULL); + g_assert(master_fd != -1); #if VTE_CHECK_VERSION(0, 26, 0) pty = vte_pty_new_foreign(master_fd, NULL); @@ -1435,7 +1429,7 @@ static const DisplayChangeListenerOps dcl_ops = { .dpy_cursor_define = gd_cursor_define, }; -void gtk_display_init(DisplayState *ds) +void gtk_display_init(DisplayState *ds, bool full_screen) { GtkDisplayState *s = g_malloc0(sizeof(*s)); char *filename; @@ -1511,6 +1505,10 @@ void gtk_display_init(DisplayState *ds) gtk_widget_show_all(s->window); + if (full_screen) { + gtk_menu_item_activate(GTK_MENU_ITEM(s->full_screen_item)); + } + register_displaychangelistener(&s->dcl); global_state = s; diff --git a/util/Makefile.objs b/util/Makefile.objs index 4a1bd4ee3a..dc72ab0721 100644 --- a/util/Makefile.objs +++ b/util/Makefile.objs @@ -1,6 +1,6 @@ util-obj-y = osdep.o cutils.o unicode.o qemu-timer-common.o util-obj-$(CONFIG_WIN32) += oslib-win32.o qemu-thread-win32.o event_notifier-win32.o -util-obj-$(CONFIG_POSIX) += oslib-posix.o qemu-thread-posix.o event_notifier-posix.o +util-obj-$(CONFIG_POSIX) += oslib-posix.o qemu-thread-posix.o event_notifier-posix.o qemu-openpty.o util-obj-y += envlist.o path.o host-utils.o cache-utils.o module.o util-obj-y += bitmap.o bitops.o hbitmap.o util-obj-y += fifo8.o diff --git a/util/qemu-openpty.c b/util/qemu-openpty.c new file mode 100644 index 0000000000..4febfe9d72 --- /dev/null +++ b/util/qemu-openpty.c @@ -0,0 +1,135 @@ +/* + * qemu-openpty.c + * + * Copyright (c) 2003-2008 Fabrice Bellard + * Copyright (c) 2010 Red Hat, Inc. + * + * Wrapper function qemu_openpty() implementation. + * + * Permission is hereby granted, free of charge, to any person obtaining a copy + * of this software and associated documentation files (the "Software"), to deal + * in the Software without restriction, including without limitation the rights + * to use, copy, modify, merge, publish, distribute, sublicense, and/or sell + * copies of the Software, and to permit persons to whom the Software is + * furnished to do so, subject to the following conditions: + * + * The above copyright notice and this permission notice shall be included in + * all copies or substantial portions of the Software. + * + * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR + * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY, + * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL + * THE AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER + * LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, + * OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN + * THE SOFTWARE. + */ + +/* + * This is not part of oslib-posix.c because this function + * uses openpty() which often in -lutil, and if we add this + * dependency to oslib-posix.o, every app will have to be + * linked with -lutil. + */ + +#include "config-host.h" +#include "qemu-common.h" + +#if defined(__GLIBC__) +# include +#elif defined CONFIG_BSD +# include +# if defined(__FreeBSD__) || defined(__FreeBSD_kernel__) || defined(__DragonFly__) +# include +# else +# include +# endif +#elif defined CONFIG_SOLARIS +# include +# include +#endif + +#ifdef __sun__ +/* Once Solaris has openpty(), this is going to be removed. */ +static int openpty(int *amaster, int *aslave, char *name, + struct termios *termp, struct winsize *winp) +{ + const char *slave; + int mfd = -1, sfd = -1; + + *amaster = *aslave = -1; + + mfd = open("/dev/ptmx", O_RDWR | O_NOCTTY); + if (mfd < 0) + goto err; + + if (grantpt(mfd) == -1 || unlockpt(mfd) == -1) + goto err; + + if ((slave = ptsname(mfd)) == NULL) + goto err; + + if ((sfd = open(slave, O_RDONLY | O_NOCTTY)) == -1) + goto err; + + if (ioctl(sfd, I_PUSH, "ptem") == -1 || + (termp != NULL && tcgetattr(sfd, termp) < 0)) + goto err; + + if (amaster) + *amaster = mfd; + if (aslave) + *aslave = sfd; + if (winp) + ioctl(sfd, TIOCSWINSZ, winp); + + return 0; + +err: + if (sfd != -1) + close(sfd); + close(mfd); + return -1; +} + +static void cfmakeraw (struct termios *termios_p) +{ + termios_p->c_iflag &= + ~(IGNBRK|BRKINT|PARMRK|ISTRIP|INLCR|IGNCR|ICRNL|IXON); + termios_p->c_oflag &= ~OPOST; + termios_p->c_lflag &= ~(ECHO|ECHONL|ICANON|ISIG|IEXTEN); + termios_p->c_cflag &= ~(CSIZE|PARENB); + termios_p->c_cflag |= CS8; + + termios_p->c_cc[VMIN] = 0; + termios_p->c_cc[VTIME] = 0; +} +#endif + +int qemu_openpty_raw(int *aslave, char *pty_name) +{ + int amaster; + struct termios tty; +#if defined(__OpenBSD__) || defined(__DragonFly__) + char pty_buf[PATH_MAX]; +#define q_ptsname(x) pty_buf +#else + char *pty_buf = NULL; +#define q_ptsname(x) ptsname(x) +#endif + + if (openpty(&amaster, aslave, pty_buf, NULL, NULL) < 0) { + return -1; + } + + /* Set raw attributes on the pty. */ + tcgetattr(*aslave, &tty); + cfmakeraw(&tty); + tcsetattr(*aslave, TCSAFLUSH, &tty); + + if (pty_name) { + strcpy(pty_name, q_ptsname(amaster)); + } + + return amaster; +} diff --git a/vl.c b/vl.c index 180fddea39..9f8fd6e377 100644 --- a/vl.c +++ b/vl.c @@ -3524,7 +3524,6 @@ int main(int argc, char **argv, char **envp) case QEMU_OPTION_full_screen: full_screen = 1; break; -#ifdef CONFIG_SDL case QEMU_OPTION_no_frame: no_frame = 1; break; @@ -3537,14 +3536,11 @@ int main(int argc, char **argv, char **envp) case QEMU_OPTION_no_quit: no_quit = 1; break; +#ifdef CONFIG_SDL case QEMU_OPTION_sdl: display_type = DT_SDL; break; #else - case QEMU_OPTION_no_frame: - case QEMU_OPTION_alt_grab: - case QEMU_OPTION_ctrl_grab: - case QEMU_OPTION_no_quit: case QEMU_OPTION_sdl: fprintf(stderr, "SDL support is disabled\n"); exit(1); @@ -4085,6 +4081,15 @@ int main(int argc, char **argv, char **envp) #endif } + if ((no_frame || alt_grab || ctrl_grab) && display_type != DT_SDL) { + fprintf(stderr, "-no-frame, -alt-grab and -ctrl-grab are only valid " + "for SDL, ignoring option\n"); + } + if (no_quit && (display_type != DT_GTK && display_type != DT_SDL)) { + fprintf(stderr, "-no-quit is only valid for GTK and SDL, " + "ignoring option\n"); + } + #if defined(CONFIG_GTK) if (display_type == DT_GTK) { early_gtk_display_init(); @@ -4348,7 +4353,7 @@ int main(int argc, char **argv, char **envp) #endif #if defined(CONFIG_GTK) case DT_GTK: - gtk_display_init(ds); + gtk_display_init(ds, full_screen); break; #endif default: diff --git a/xen-all.c b/xen-all.c index bc105f1627..1a1d7bbdcc 100644 --- a/xen-all.c +++ b/xen-all.c @@ -389,7 +389,7 @@ static int xen_remove_from_physmap(XenIOState *state, if (state->log_for_dirtybit == physmap) { state->log_for_dirtybit = NULL; } - free(physmap); + g_free(physmap); return 0; } @@ -1030,7 +1030,7 @@ static void xen_read_physmap(XenIOState *state) xen_domid, entries[i]); value = xs_read(state->xenstore, 0, path, &len); if (value == NULL) { - free(physmap); + g_free(physmap); continue; } physmap->start_addr = strtoull(value, NULL, 16); @@ -1041,7 +1041,7 @@ static void xen_read_physmap(XenIOState *state) xen_domid, entries[i]); value = xs_read(state->xenstore, 0, path, &len); if (value == NULL) { - free(physmap); + g_free(physmap); continue; } physmap->size = strtoull(value, NULL, 16); @@ -1069,12 +1069,14 @@ int xen_hvm_init(void) state->xce_handle = xen_xc_evtchn_open(NULL, 0); if (state->xce_handle == XC_HANDLER_INITIAL_VALUE) { perror("xen: event channel open"); + g_free(state); return -errno; } state->xenstore = xs_daemon_open(); if (state->xenstore == NULL) { perror("xen: xenstore open"); + g_free(state); return -errno; }