Revert "hw/block/pflash_cfi02: Reduce I/O accesses to 16-bit"
This reverts commit3ae0343db6
. Stephen Checkoway noticed commit3ae0343db6
is incorrect. This commit state all parallel flashes are limited to 16-bit accesses, however the x32 configuration exists in some models, such the Cypress S29CL032J, which CFI Device Geometry Definition announces: CFI ADDR DATA 0x28,0x29 = 0x0003 (x32-only asynchronous interface) Guests should not be affected by the previous change, because QEMU does not announce itself as x32 capable: /* Flash device interface (8 & 16 bits) */ pfl->cfi_table[0x28] = 0x02; pfl->cfi_table[0x29] = 0x00; Commit3ae0343db6
does not restrict the bus to 16-bit accesses, but restrict the implementation as 16-bit access max, so a guest 32-bit access will result in 2x 16-bit calls. Now, we have 2 boards that register the flash device in 32-bit access: - PPC: taihu_405ep The CFI id matches the S29AL008J that is a 1MB in x16, while the code QEMU forces it to be 2MB, and checking Linux it expects a 4MB flash. - ARM: Digic4 While the comment says "Samsung K8P3215UQB 64M Bit (4Mx16)", this flash is 32Mb (2MB). Also note the CFI id does not match the comment. To avoid unexpected side effect, we revert commit3ae0343db6
, and will clean the board code later. Reported-by: Stephen Checkoway <stephen.checkoway@oberlin.edu> Reviewed-by: Markus Armbruster <armbru@redhat.com> Signed-off-by: Philippe Mathieu-Daudé <philmd@redhat.com>
This commit is contained in:
parent
a538626aff
commit
51500d3770
|
@ -317,6 +317,8 @@ static uint64_t pflash_read(void *opaque, hwaddr offset, unsigned int width)
|
||||||
boff = offset & 0xFF;
|
boff = offset & 0xFF;
|
||||||
if (pfl->width == 2) {
|
if (pfl->width == 2) {
|
||||||
boff = boff >> 1;
|
boff = boff >> 1;
|
||||||
|
} else if (pfl->width == 4) {
|
||||||
|
boff = boff >> 2;
|
||||||
}
|
}
|
||||||
switch (pfl->cmd) {
|
switch (pfl->cmd) {
|
||||||
default:
|
default:
|
||||||
|
@ -447,6 +449,8 @@ static void pflash_write(void *opaque, hwaddr offset, uint64_t value,
|
||||||
boff = offset;
|
boff = offset;
|
||||||
if (pfl->width == 2) {
|
if (pfl->width == 2) {
|
||||||
boff = boff >> 1;
|
boff = boff >> 1;
|
||||||
|
} else if (pfl->width == 4) {
|
||||||
|
boff = boff >> 2;
|
||||||
}
|
}
|
||||||
/* Only the least-significant 11 bits are used in most cases. */
|
/* Only the least-significant 11 bits are used in most cases. */
|
||||||
boff &= 0x7FF;
|
boff &= 0x7FF;
|
||||||
|
@ -706,7 +710,6 @@ static void pflash_write(void *opaque, hwaddr offset, uint64_t value,
|
||||||
static const MemoryRegionOps pflash_cfi02_ops = {
|
static const MemoryRegionOps pflash_cfi02_ops = {
|
||||||
.read = pflash_read,
|
.read = pflash_read,
|
||||||
.write = pflash_write,
|
.write = pflash_write,
|
||||||
.impl.max_access_size = 2,
|
|
||||||
.valid.min_access_size = 1,
|
.valid.min_access_size = 1,
|
||||||
.valid.max_access_size = 4,
|
.valid.max_access_size = 4,
|
||||||
.endianness = DEVICE_NATIVE_ENDIAN,
|
.endianness = DEVICE_NATIVE_ENDIAN,
|
||||||
|
|
Loading…
Reference in a new issue