target-arm: Define correct mmu_idx values and pass them in TB flags
We currently claim that for ARM the mmu_idx should simply be the current exception level. However this isn't actually correct -- secure EL0 and EL1 should have separate indexes from non-secure EL0 and EL1 since their VA->PA mappings may differ. We also will want an index for stage 2 translations when we properly support EL2. Define and document all seven mmu index values that we require, and pass the mmu index in the TB flags rather than exception level or priv/user bit. This change doesn't update the get_phys_addr() code, so our page table walking still assumes a simplistic "user or priv?" model for the moment. Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Greg Bellows <greg.bellows@linaro.org> --- This leaves some odd gaps in the TB flags usage. I will circle back and clean this up later (including moving the other common flags like the singlestep ones to the top of the flags word), but I didn't want to bloat this patchseries further.
This commit is contained in:
parent
949013ce11
commit
c1e3781090
115
target-arm/cpu.h
115
target-arm/cpu.h
|
@ -98,7 +98,7 @@ typedef uint32_t ARMReadCPFunc(void *opaque, int cp_info,
|
|||
|
||||
struct arm_boot_info;
|
||||
|
||||
#define NB_MMU_MODES 4
|
||||
#define NB_MMU_MODES 7
|
||||
|
||||
/* We currently assume float and double are IEEE single and double
|
||||
precision respectively.
|
||||
|
@ -1579,13 +1579,92 @@ static inline CPUARMState *cpu_init(const char *cpu_model)
|
|||
#define cpu_signal_handler cpu_arm_signal_handler
|
||||
#define cpu_list arm_cpu_list
|
||||
|
||||
/* MMU modes definitions */
|
||||
/* ARM has the following "translation regimes" (as the ARM ARM calls them):
|
||||
*
|
||||
* If EL3 is 64-bit:
|
||||
* + NonSecure EL1 & 0 stage 1
|
||||
* + NonSecure EL1 & 0 stage 2
|
||||
* + NonSecure EL2
|
||||
* + Secure EL1 & EL0
|
||||
* + Secure EL3
|
||||
* If EL3 is 32-bit:
|
||||
* + NonSecure PL1 & 0 stage 1
|
||||
* + NonSecure PL1 & 0 stage 2
|
||||
* + NonSecure PL2
|
||||
* + Secure PL0 & PL1
|
||||
* (reminder: for 32 bit EL3, Secure PL1 is *EL3*, not EL1.)
|
||||
*
|
||||
* For QEMU, an mmu_idx is not quite the same as a translation regime because:
|
||||
* 1. we need to split the "EL1 & 0" regimes into two mmu_idxes, because they
|
||||
* may differ in access permissions even if the VA->PA map is the same
|
||||
* 2. we want to cache in our TLB the full VA->IPA->PA lookup for a stage 1+2
|
||||
* translation, which means that we have one mmu_idx that deals with two
|
||||
* concatenated translation regimes [this sort of combined s1+2 TLB is
|
||||
* architecturally permitted]
|
||||
* 3. we don't need to allocate an mmu_idx to translations that we won't be
|
||||
* handling via the TLB. The only way to do a stage 1 translation without
|
||||
* the immediate stage 2 translation is via the ATS or AT system insns,
|
||||
* which can be slow-pathed and always do a page table walk.
|
||||
* 4. we can also safely fold together the "32 bit EL3" and "64 bit EL3"
|
||||
* translation regimes, because they map reasonably well to each other
|
||||
* and they can't both be active at the same time.
|
||||
* This gives us the following list of mmu_idx values:
|
||||
*
|
||||
* NS EL0 (aka NS PL0) stage 1+2
|
||||
* NS EL1 (aka NS PL1) stage 1+2
|
||||
* NS EL2 (aka NS PL2)
|
||||
* S EL3 (aka S PL1)
|
||||
* S EL0 (aka S PL0)
|
||||
* S EL1 (not used if EL3 is 32 bit)
|
||||
* NS EL0+1 stage 2
|
||||
*
|
||||
* (The last of these is an mmu_idx because we want to be able to use the TLB
|
||||
* for the accesses done as part of a stage 1 page table walk, rather than
|
||||
* having to walk the stage 2 page table over and over.)
|
||||
*
|
||||
* Our enumeration includes at the end some entries which are not "true"
|
||||
* mmu_idx values in that they don't have corresponding TLBs and are only
|
||||
* valid for doing slow path page table walks.
|
||||
*
|
||||
* The constant names here are patterned after the general style of the names
|
||||
* of the AT/ATS operations.
|
||||
* The values used are carefully arranged to make mmu_idx => EL lookup easy.
|
||||
*/
|
||||
typedef enum ARMMMUIdx {
|
||||
ARMMMUIdx_S12NSE0 = 0,
|
||||
ARMMMUIdx_S12NSE1 = 1,
|
||||
ARMMMUIdx_S1E2 = 2,
|
||||
ARMMMUIdx_S1E3 = 3,
|
||||
ARMMMUIdx_S1SE0 = 4,
|
||||
ARMMMUIdx_S1SE1 = 5,
|
||||
ARMMMUIdx_S2NS = 6,
|
||||
/* Indexes below here don't have TLBs and are used only for AT system
|
||||
* instructions or for the first stage of an S12 page table walk.
|
||||
*/
|
||||
ARMMMUIdx_S1NSE0 = 7,
|
||||
ARMMMUIdx_S1NSE1 = 8,
|
||||
} ARMMMUIdx;
|
||||
|
||||
#define MMU_MODE0_SUFFIX _user
|
||||
#define MMU_MODE1_SUFFIX _kernel
|
||||
#define MMU_USER_IDX 0
|
||||
static inline int cpu_mmu_index (CPUARMState *env)
|
||||
|
||||
/* Return the exception level we're running at if this is our mmu_idx */
|
||||
static inline int arm_mmu_idx_to_el(ARMMMUIdx mmu_idx)
|
||||
{
|
||||
return arm_current_el(env);
|
||||
assert(mmu_idx < ARMMMUIdx_S2NS);
|
||||
return mmu_idx & 3;
|
||||
}
|
||||
|
||||
/* Determine the current mmu_idx to use for normal loads/stores */
|
||||
static inline int cpu_mmu_index(CPUARMState *env)
|
||||
{
|
||||
int el = arm_current_el(env);
|
||||
|
||||
if (el < 2 && arm_is_secure_below_el3(env)) {
|
||||
return ARMMMUIdx_S1SE0 + el;
|
||||
}
|
||||
return el;
|
||||
}
|
||||
|
||||
/* Return the Exception Level targeted by debug exceptions;
|
||||
|
@ -1652,9 +1731,13 @@ static inline bool arm_singlestep_active(CPUARMState *env)
|
|||
|
||||
/* Bit usage in the TB flags field: bit 31 indicates whether we are
|
||||
* in 32 or 64 bit mode. The meaning of the other bits depends on that.
|
||||
* We put flags which are shared between 32 and 64 bit mode at the top
|
||||
* of the word, and flags which apply to only one mode at the bottom.
|
||||
*/
|
||||
#define ARM_TBFLAG_AARCH64_STATE_SHIFT 31
|
||||
#define ARM_TBFLAG_AARCH64_STATE_MASK (1U << ARM_TBFLAG_AARCH64_STATE_SHIFT)
|
||||
#define ARM_TBFLAG_MMUIDX_SHIFT 28
|
||||
#define ARM_TBFLAG_MMUIDX_MASK (0x7 << ARM_TBFLAG_MMUIDX_SHIFT)
|
||||
|
||||
/* Bit usage when in AArch32 state: */
|
||||
#define ARM_TBFLAG_THUMB_SHIFT 0
|
||||
|
@ -1663,8 +1746,6 @@ static inline bool arm_singlestep_active(CPUARMState *env)
|
|||
#define ARM_TBFLAG_VECLEN_MASK (0x7 << ARM_TBFLAG_VECLEN_SHIFT)
|
||||
#define ARM_TBFLAG_VECSTRIDE_SHIFT 4
|
||||
#define ARM_TBFLAG_VECSTRIDE_MASK (0x3 << ARM_TBFLAG_VECSTRIDE_SHIFT)
|
||||
#define ARM_TBFLAG_PRIV_SHIFT 6
|
||||
#define ARM_TBFLAG_PRIV_MASK (1 << ARM_TBFLAG_PRIV_SHIFT)
|
||||
#define ARM_TBFLAG_VFPEN_SHIFT 7
|
||||
#define ARM_TBFLAG_VFPEN_MASK (1 << ARM_TBFLAG_VFPEN_SHIFT)
|
||||
#define ARM_TBFLAG_CONDEXEC_SHIFT 8
|
||||
|
@ -1690,8 +1771,6 @@ static inline bool arm_singlestep_active(CPUARMState *env)
|
|||
#define ARM_TBFLAG_NS_MASK (1 << ARM_TBFLAG_NS_SHIFT)
|
||||
|
||||
/* Bit usage when in AArch64 state */
|
||||
#define ARM_TBFLAG_AA64_EL_SHIFT 0
|
||||
#define ARM_TBFLAG_AA64_EL_MASK (0x3 << ARM_TBFLAG_AA64_EL_SHIFT)
|
||||
#define ARM_TBFLAG_AA64_FPEN_SHIFT 2
|
||||
#define ARM_TBFLAG_AA64_FPEN_MASK (1 << ARM_TBFLAG_AA64_FPEN_SHIFT)
|
||||
#define ARM_TBFLAG_AA64_SS_ACTIVE_SHIFT 3
|
||||
|
@ -1702,14 +1781,14 @@ static inline bool arm_singlestep_active(CPUARMState *env)
|
|||
/* some convenience accessor macros */
|
||||
#define ARM_TBFLAG_AARCH64_STATE(F) \
|
||||
(((F) & ARM_TBFLAG_AARCH64_STATE_MASK) >> ARM_TBFLAG_AARCH64_STATE_SHIFT)
|
||||
#define ARM_TBFLAG_MMUIDX(F) \
|
||||
(((F) & ARM_TBFLAG_MMUIDX_MASK) >> ARM_TBFLAG_MMUIDX_SHIFT)
|
||||
#define ARM_TBFLAG_THUMB(F) \
|
||||
(((F) & ARM_TBFLAG_THUMB_MASK) >> ARM_TBFLAG_THUMB_SHIFT)
|
||||
#define ARM_TBFLAG_VECLEN(F) \
|
||||
(((F) & ARM_TBFLAG_VECLEN_MASK) >> ARM_TBFLAG_VECLEN_SHIFT)
|
||||
#define ARM_TBFLAG_VECSTRIDE(F) \
|
||||
(((F) & ARM_TBFLAG_VECSTRIDE_MASK) >> ARM_TBFLAG_VECSTRIDE_SHIFT)
|
||||
#define ARM_TBFLAG_PRIV(F) \
|
||||
(((F) & ARM_TBFLAG_PRIV_MASK) >> ARM_TBFLAG_PRIV_SHIFT)
|
||||
#define ARM_TBFLAG_VFPEN(F) \
|
||||
(((F) & ARM_TBFLAG_VFPEN_MASK) >> ARM_TBFLAG_VFPEN_SHIFT)
|
||||
#define ARM_TBFLAG_CONDEXEC(F) \
|
||||
|
@ -1724,8 +1803,6 @@ static inline bool arm_singlestep_active(CPUARMState *env)
|
|||
(((F) & ARM_TBFLAG_PSTATE_SS_MASK) >> ARM_TBFLAG_PSTATE_SS_SHIFT)
|
||||
#define ARM_TBFLAG_XSCALE_CPAR(F) \
|
||||
(((F) & ARM_TBFLAG_XSCALE_CPAR_MASK) >> ARM_TBFLAG_XSCALE_CPAR_SHIFT)
|
||||
#define ARM_TBFLAG_AA64_EL(F) \
|
||||
(((F) & ARM_TBFLAG_AA64_EL_MASK) >> ARM_TBFLAG_AA64_EL_SHIFT)
|
||||
#define ARM_TBFLAG_AA64_FPEN(F) \
|
||||
(((F) & ARM_TBFLAG_AA64_FPEN_MASK) >> ARM_TBFLAG_AA64_FPEN_SHIFT)
|
||||
#define ARM_TBFLAG_AA64_SS_ACTIVE(F) \
|
||||
|
@ -1749,8 +1826,7 @@ static inline void cpu_get_tb_cpu_state(CPUARMState *env, target_ulong *pc,
|
|||
|
||||
if (is_a64(env)) {
|
||||
*pc = env->pc;
|
||||
*flags = ARM_TBFLAG_AARCH64_STATE_MASK
|
||||
| (arm_current_el(env) << ARM_TBFLAG_AA64_EL_SHIFT);
|
||||
*flags = ARM_TBFLAG_AARCH64_STATE_MASK;
|
||||
if (fpen == 3 || (fpen == 1 && arm_current_el(env) != 0)) {
|
||||
*flags |= ARM_TBFLAG_AA64_FPEN_MASK;
|
||||
}
|
||||
|
@ -1768,21 +1844,12 @@ static inline void cpu_get_tb_cpu_state(CPUARMState *env, target_ulong *pc,
|
|||
}
|
||||
}
|
||||
} else {
|
||||
int privmode;
|
||||
*pc = env->regs[15];
|
||||
*flags = (env->thumb << ARM_TBFLAG_THUMB_SHIFT)
|
||||
| (env->vfp.vec_len << ARM_TBFLAG_VECLEN_SHIFT)
|
||||
| (env->vfp.vec_stride << ARM_TBFLAG_VECSTRIDE_SHIFT)
|
||||
| (env->condexec_bits << ARM_TBFLAG_CONDEXEC_SHIFT)
|
||||
| (env->bswap_code << ARM_TBFLAG_BSWAP_CODE_SHIFT);
|
||||
if (arm_feature(env, ARM_FEATURE_M)) {
|
||||
privmode = !((env->v7m.exception == 0) && (env->v7m.control & 1));
|
||||
} else {
|
||||
privmode = (env->uncached_cpsr & CPSR_M) != ARM_CPU_MODE_USR;
|
||||
}
|
||||
if (privmode) {
|
||||
*flags |= ARM_TBFLAG_PRIV_MASK;
|
||||
}
|
||||
if (!(access_secure_reg(env))) {
|
||||
*flags |= ARM_TBFLAG_NS_MASK;
|
||||
}
|
||||
|
@ -1810,6 +1877,8 @@ static inline void cpu_get_tb_cpu_state(CPUARMState *env, target_ulong *pc,
|
|||
<< ARM_TBFLAG_XSCALE_CPAR_SHIFT);
|
||||
}
|
||||
|
||||
*flags |= (cpu_mmu_index(env) << ARM_TBFLAG_MMUIDX_SHIFT);
|
||||
|
||||
*cs_base = 0;
|
||||
}
|
||||
|
||||
|
|
|
@ -5179,7 +5179,8 @@ int arm_cpu_handle_mmu_fault(CPUState *cs, vaddr address,
|
|||
uint32_t syn;
|
||||
bool same_el = (arm_current_el(env) != 0);
|
||||
|
||||
is_user = mmu_idx == MMU_USER_IDX;
|
||||
/* TODO: pass the translation regime to get_phys_addr */
|
||||
is_user = (arm_mmu_idx_to_el(mmu_idx) == 0);
|
||||
ret = get_phys_addr(env, address, access_type, is_user, &phys_addr, &prot,
|
||||
&page_size);
|
||||
if (ret == 0) {
|
||||
|
|
|
@ -10922,14 +10922,15 @@ void gen_intermediate_code_internal_a64(ARMCPU *cpu,
|
|||
dc->bswap_code = 0;
|
||||
dc->condexec_mask = 0;
|
||||
dc->condexec_cond = 0;
|
||||
dc->mmu_idx = ARM_TBFLAG_MMUIDX(tb->flags);
|
||||
dc->current_el = arm_mmu_idx_to_el(dc->mmu_idx);
|
||||
#if !defined(CONFIG_USER_ONLY)
|
||||
dc->user = (ARM_TBFLAG_AA64_EL(tb->flags) == 0);
|
||||
dc->user = (dc->current_el == 0);
|
||||
#endif
|
||||
dc->cpacr_fpen = ARM_TBFLAG_AA64_FPEN(tb->flags);
|
||||
dc->vec_len = 0;
|
||||
dc->vec_stride = 0;
|
||||
dc->cp_regs = cpu->cp_regs;
|
||||
dc->current_el = arm_current_el(env);
|
||||
dc->features = env->features;
|
||||
|
||||
/* Single step state. The code-generation logic here is:
|
||||
|
|
|
@ -11036,8 +11036,10 @@ static inline void gen_intermediate_code_internal(ARMCPU *cpu,
|
|||
dc->bswap_code = ARM_TBFLAG_BSWAP_CODE(tb->flags);
|
||||
dc->condexec_mask = (ARM_TBFLAG_CONDEXEC(tb->flags) & 0xf) << 1;
|
||||
dc->condexec_cond = ARM_TBFLAG_CONDEXEC(tb->flags) >> 4;
|
||||
dc->mmu_idx = ARM_TBFLAG_MMUIDX(tb->flags);
|
||||
dc->current_el = arm_mmu_idx_to_el(dc->mmu_idx);
|
||||
#if !defined(CONFIG_USER_ONLY)
|
||||
dc->user = (ARM_TBFLAG_PRIV(tb->flags) == 0);
|
||||
dc->user = (dc->current_el == 0);
|
||||
#endif
|
||||
dc->ns = ARM_TBFLAG_NS(tb->flags);
|
||||
dc->cpacr_fpen = ARM_TBFLAG_CPACR_FPEN(tb->flags);
|
||||
|
@ -11046,7 +11048,6 @@ static inline void gen_intermediate_code_internal(ARMCPU *cpu,
|
|||
dc->vec_stride = ARM_TBFLAG_VECSTRIDE(tb->flags);
|
||||
dc->c15_cpar = ARM_TBFLAG_XSCALE_CPAR(tb->flags);
|
||||
dc->cp_regs = cpu->cp_regs;
|
||||
dc->current_el = arm_current_el(env);
|
||||
dc->features = env->features;
|
||||
|
||||
/* Single step state. The code-generation logic here is:
|
||||
|
|
|
@ -20,6 +20,7 @@ typedef struct DisasContext {
|
|||
#if !defined(CONFIG_USER_ONLY)
|
||||
int user;
|
||||
#endif
|
||||
ARMMMUIdx mmu_idx; /* MMU index to use for normal loads/stores */
|
||||
bool ns; /* Use non-secure CPREG bank on access */
|
||||
bool cpacr_fpen; /* FP enabled via CPACR.FPEN */
|
||||
bool vfp_enabled; /* FP enabled via FPSCR.EN */
|
||||
|
@ -69,7 +70,7 @@ static inline int arm_dc_feature(DisasContext *dc, int feature)
|
|||
|
||||
static inline int get_mem_index(DisasContext *s)
|
||||
{
|
||||
return s->current_el;
|
||||
return s->mmu_idx;
|
||||
}
|
||||
|
||||
/* target-specific extra values for is_jmp */
|
||||
|
|
Loading…
Reference in a new issue