moved PCI init to BIOS - added ISA memory mapping registers and SMM support
git-svn-id: svn://svn.savannah.nongnu.org/qemu/trunk@2174 c046a42c-6fe2-441c-8c8c-71466251a162
This commit is contained in:
bellard
parent
02a1602e62
commit
ee0ea1d0dd
348
hw/piix_pci.c
348
hw/piix_pci.c
|
|
@ -52,7 +52,123 @@ static int pci_slot_get_pirq(PCIDevice *pci_dev, int irq_num)
|
|||
return (irq_num + slot_addend) & 3;
|
||||
}
|
||||
|
||||
PCIBus *i440fx_init(void)
|
||||
static uint32_t isa_page_descs[384 / 4];
|
||||
static uint8_t smm_enabled;
|
||||
|
||||
static const uint32_t mar_addresses[15] = {
|
||||
0xa0000,
|
||||
0xc0000,
|
||||
0xc4000,
|
||||
0xc8000,
|
||||
0xcc000,
|
||||
0xd0000,
|
||||
0xd4000,
|
||||
0xd8000,
|
||||
0xdc000,
|
||||
0xe0000,
|
||||
0xe4000,
|
||||
0xe8000,
|
||||
0xec000,
|
||||
0xf0000,
|
||||
0x100000,
|
||||
};
|
||||
|
||||
static void i440fx_update_memory_mappings(PCIDevice *d)
|
||||
{
|
||||
int i, r;
|
||||
uint32_t start, end, addr;
|
||||
uint32_t smram, smbase, smsize;
|
||||
|
||||
for(i = 0; i < 14; i++) {
|
||||
r = (d->config[(i >> 1) + 0x61] >> ((i & 1) * 4)) & 3;
|
||||
start = mar_addresses[i];
|
||||
end = mar_addresses[i + 1];
|
||||
// printf("ISA mapping %08x: %d\n", start, r);
|
||||
switch(r) {
|
||||
case 3:
|
||||
/* RAM */
|
||||
cpu_register_physical_memory(start, end - start,
|
||||
start);
|
||||
break;
|
||||
case 2:
|
||||
/* ROM (XXX: not quite correct) */
|
||||
cpu_register_physical_memory(start, end - start,
|
||||
start | IO_MEM_ROM);
|
||||
break;
|
||||
case 1:
|
||||
case 0:
|
||||
/* XXX: should distinguish read/write cases */
|
||||
for(addr = start; addr < end; addr += 4096) {
|
||||
cpu_register_physical_memory(addr, 4096,
|
||||
isa_page_descs[(addr - 0xa0000) >> 12]);
|
||||
}
|
||||
break;
|
||||
}
|
||||
}
|
||||
smram = le32_to_cpu(*(uint32_t *)(d->config + 0x6c));
|
||||
if ((smm_enabled && (smram & 0x80000000)) || (smram & (1 << 26))) {
|
||||
/* Note: we assume the SMM area is in the 0xa0000-0x100000 range */
|
||||
smbase = (smram & 0xffff) << 16;
|
||||
smsize = (((smram >> 20) & 0xf) + 1) << 16;
|
||||
if (smbase >= 0xa0000 && (smbase + smsize) <= 0x100000) {
|
||||
cpu_register_physical_memory(smbase, smsize, smbase);
|
||||
}
|
||||
}
|
||||
}
|
||||
|
||||
void i440fx_set_smm(PCIDevice *d, int val)
|
||||
{
|
||||
val = (val != 0);
|
||||
if (smm_enabled != val) {
|
||||
smm_enabled = val;
|
||||
i440fx_update_memory_mappings(d);
|
||||
}
|
||||
}
|
||||
|
||||
|
||||
/* XXX: suppress when better memory API. We make the assumption that
|
||||
no device (in particular the VGA) changes the memory mappings in
|
||||
the 0xa0000-0x100000 range */
|
||||
void i440fx_init_memory_mappings(PCIDevice *d)
|
||||
{
|
||||
int i;
|
||||
for(i = 0; i < 96; i++) {
|
||||
isa_page_descs[i] = cpu_get_physical_page_desc(0xa0000 + i * 0x1000);
|
||||
}
|
||||
}
|
||||
|
||||
static void i440fx_write_config(PCIDevice *d,
|
||||
uint32_t address, uint32_t val, int len)
|
||||
{
|
||||
/* XXX: implement SMRAM.D_LOCK */
|
||||
pci_default_write_config(d, address, val, len);
|
||||
if ((address >= 0x61 && address <= 0x67) || address == 0x6c)
|
||||
i440fx_update_memory_mappings(d);
|
||||
}
|
||||
|
||||
static void i440fx_save(QEMUFile* f, void *opaque)
|
||||
{
|
||||
PCIDevice *d = opaque;
|
||||
pci_device_save(d, f);
|
||||
qemu_put_8s(f, &smm_enabled);
|
||||
}
|
||||
|
||||
static int i440fx_load(QEMUFile* f, void *opaque, int version_id)
|
||||
{
|
||||
PCIDevice *d = opaque;
|
||||
int ret;
|
||||
|
||||
if (version_id != 1)
|
||||
return -EINVAL;
|
||||
ret = pci_device_load(d, f);
|
||||
if (ret < 0)
|
||||
return ret;
|
||||
i440fx_update_memory_mappings(d);
|
||||
qemu_get_8s(f, &smm_enabled);
|
||||
return 0;
|
||||
}
|
||||
|
||||
PCIBus *i440fx_init(PCIDevice **pi440fx_state)
|
||||
{
|
||||
PCIBus *b;
|
||||
PCIDevice *d;
|
||||
|
|
@ -73,7 +189,7 @@ PCIBus *i440fx_init(void)
|
|||
register_ioport_read(0xcfc, 4, 4, pci_host_data_readl, s);
|
||||
|
||||
d = pci_register_device(b, "i440FX", sizeof(PCIDevice), 0,
|
||||
NULL, NULL);
|
||||
NULL, i440fx_write_config);
|
||||
|
||||
d->config[0x00] = 0x86; // vendor_id
|
||||
d->config[0x01] = 0x80;
|
||||
|
|
@ -83,6 +199,11 @@ PCIBus *i440fx_init(void)
|
|||
d->config[0x0a] = 0x00; // class_sub = host2pci
|
||||
d->config[0x0b] = 0x06; // class_base = PCI_bridge
|
||||
d->config[0x0e] = 0x00; // header_type
|
||||
|
||||
d->config[0x6c] = 0x0a; /* SMRAM */
|
||||
|
||||
register_savevm("I440FX", 0, 1, i440fx_save, i440fx_load, d);
|
||||
*pi440fx_state = d;
|
||||
return b;
|
||||
}
|
||||
|
||||
|
|
@ -188,226 +309,3 @@ int piix3_init(PCIBus *bus)
|
|||
piix3_reset(d);
|
||||
return d->devfn;
|
||||
}
|
||||
|
||||
/***********************************************************/
|
||||
/* XXX: the following should be moved to the PC BIOS */
|
||||
|
||||
static __attribute__((unused)) uint32_t isa_inb(uint32_t addr)
|
||||
{
|
||||
return cpu_inb(NULL, addr);
|
||||
}
|
||||
|
||||
static void isa_outb(uint32_t val, uint32_t addr)
|
||||
{
|
||||
cpu_outb(NULL, addr, val);
|
||||
}
|
||||
|
||||
static __attribute__((unused)) uint32_t isa_inw(uint32_t addr)
|
||||
{
|
||||
return cpu_inw(NULL, addr);
|
||||
}
|
||||
|
||||
static __attribute__((unused)) void isa_outw(uint32_t val, uint32_t addr)
|
||||
{
|
||||
cpu_outw(NULL, addr, val);
|
||||
}
|
||||
|
||||
static __attribute__((unused)) uint32_t isa_inl(uint32_t addr)
|
||||
{
|
||||
return cpu_inl(NULL, addr);
|
||||
}
|
||||
|
||||
static __attribute__((unused)) void isa_outl(uint32_t val, uint32_t addr)
|
||||
{
|
||||
cpu_outl(NULL, addr, val);
|
||||
}
|
||||
|
||||
static uint32_t pci_bios_io_addr;
|
||||
static uint32_t pci_bios_mem_addr;
|
||||
/* host irqs corresponding to PCI irqs A-D */
|
||||
static uint8_t pci_irqs[4] = { 11, 9, 11, 9 };
|
||||
static int pci_bios_next_bus;
|
||||
|
||||
static void pci_config_writel(PCIDevice *d, uint32_t addr, uint32_t val)
|
||||
{
|
||||
PCIBus *s = d->bus;
|
||||
addr |= (pci_bus_num(s) << 16) | (d->devfn << 8);
|
||||
pci_data_write(s, addr, val, 4);
|
||||
}
|
||||
|
||||
static void pci_config_writew(PCIDevice *d, uint32_t addr, uint32_t val)
|
||||
{
|
||||
PCIBus *s = d->bus;
|
||||
addr |= (pci_bus_num(s) << 16) | (d->devfn << 8);
|
||||
pci_data_write(s, addr, val, 2);
|
||||
}
|
||||
|
||||
static void pci_config_writeb(PCIDevice *d, uint32_t addr, uint32_t val)
|
||||
{
|
||||
PCIBus *s = d->bus;
|
||||
addr |= (pci_bus_num(s) << 16) | (d->devfn << 8);
|
||||
pci_data_write(s, addr, val, 1);
|
||||
}
|
||||
|
||||
static __attribute__((unused)) uint32_t pci_config_readl(PCIDevice *d, uint32_t addr)
|
||||
{
|
||||
PCIBus *s = d->bus;
|
||||
addr |= (pci_bus_num(s) << 16) | (d->devfn << 8);
|
||||
return pci_data_read(s, addr, 4);
|
||||
}
|
||||
|
||||
static uint32_t pci_config_readw(PCIDevice *d, uint32_t addr)
|
||||
{
|
||||
PCIBus *s = d->bus;
|
||||
addr |= (pci_bus_num(s) << 16) | (d->devfn << 8);
|
||||
return pci_data_read(s, addr, 2);
|
||||
}
|
||||
|
||||
static uint32_t pci_config_readb(PCIDevice *d, uint32_t addr)
|
||||
{
|
||||
PCIBus *s = d->bus;
|
||||
addr |= (pci_bus_num(s) << 16) | (d->devfn << 8);
|
||||
return pci_data_read(s, addr, 1);
|
||||
}
|
||||
|
||||
static void pci_set_io_region_addr(PCIDevice *d, int region_num, uint32_t addr)
|
||||
{
|
||||
PCIIORegion *r;
|
||||
uint16_t cmd;
|
||||
uint32_t ofs;
|
||||
|
||||
if ( region_num == PCI_ROM_SLOT ) {
|
||||
ofs = 0x30;
|
||||
}else{
|
||||
ofs = 0x10 + region_num * 4;
|
||||
}
|
||||
|
||||
pci_config_writel(d, ofs, addr);
|
||||
r = &d->io_regions[region_num];
|
||||
|
||||
/* enable memory mappings */
|
||||
cmd = pci_config_readw(d, PCI_COMMAND);
|
||||
if ( region_num == PCI_ROM_SLOT )
|
||||
cmd |= 2;
|
||||
else if (r->type & PCI_ADDRESS_SPACE_IO)
|
||||
cmd |= 1;
|
||||
else
|
||||
cmd |= 2;
|
||||
pci_config_writew(d, PCI_COMMAND, cmd);
|
||||
}
|
||||
|
||||
static void pci_bios_init_device(PCIDevice *d)
|
||||
{
|
||||
int class;
|
||||
PCIIORegion *r;
|
||||
uint32_t *paddr;
|
||||
int i, pin, pic_irq, vendor_id, device_id;
|
||||
|
||||
class = pci_config_readw(d, PCI_CLASS_DEVICE);
|
||||
vendor_id = pci_config_readw(d, PCI_VENDOR_ID);
|
||||
device_id = pci_config_readw(d, PCI_DEVICE_ID);
|
||||
switch(class) {
|
||||
case 0x0101:
|
||||
if (vendor_id == 0x8086 && device_id == 0x7010) {
|
||||
/* PIIX3 IDE */
|
||||
pci_config_writew(d, 0x40, 0x8000); // enable IDE0
|
||||
pci_config_writew(d, 0x42, 0x8000); // enable IDE1
|
||||
goto default_map;
|
||||
} else {
|
||||
/* IDE: we map it as in ISA mode */
|
||||
pci_set_io_region_addr(d, 0, 0x1f0);
|
||||
pci_set_io_region_addr(d, 1, 0x3f4);
|
||||
pci_set_io_region_addr(d, 2, 0x170);
|
||||
pci_set_io_region_addr(d, 3, 0x374);
|
||||
}
|
||||
break;
|
||||
case 0x0604:
|
||||
/* PCI to PCI bridge. Assign bus ID and recurse to configure
|
||||
devices on the secondary bus. */
|
||||
i = pci_bios_next_bus++;
|
||||
pci_config_writeb(d, 0x18, pci_bus_num(d->bus));
|
||||
pci_config_writeb(d, 0x19, i);
|
||||
pci_for_each_device(i, pci_bios_init_device);
|
||||
break;
|
||||
case 0x0300:
|
||||
if (vendor_id != 0x1234)
|
||||
goto default_map;
|
||||
/* VGA: map frame buffer to default Bochs VBE address */
|
||||
pci_set_io_region_addr(d, 0, 0xE0000000);
|
||||
break;
|
||||
case 0x0800:
|
||||
/* PIC */
|
||||
vendor_id = pci_config_readw(d, PCI_VENDOR_ID);
|
||||
device_id = pci_config_readw(d, PCI_DEVICE_ID);
|
||||
if (vendor_id == 0x1014) {
|
||||
/* IBM */
|
||||
if (device_id == 0x0046 || device_id == 0xFFFF) {
|
||||
/* MPIC & MPIC2 */
|
||||
pci_set_io_region_addr(d, 0, 0x80800000 + 0x00040000);
|
||||
}
|
||||
}
|
||||
break;
|
||||
case 0xff00:
|
||||
if (vendor_id == 0x0106b &&
|
||||
(device_id == 0x0017 || device_id == 0x0022)) {
|
||||
/* macio bridge */
|
||||
pci_set_io_region_addr(d, 0, 0x80800000);
|
||||
}
|
||||
break;
|
||||
default:
|
||||
default_map:
|
||||
/* default memory mappings */
|
||||
for(i = 0; i < PCI_NUM_REGIONS; i++) {
|
||||
r = &d->io_regions[i];
|
||||
if (r->size) {
|
||||
if (r->type & PCI_ADDRESS_SPACE_IO)
|
||||
paddr = &pci_bios_io_addr;
|
||||
else
|
||||
paddr = &pci_bios_mem_addr;
|
||||
*paddr = (*paddr + r->size - 1) & ~(r->size - 1);
|
||||
pci_set_io_region_addr(d, i, *paddr);
|
||||
*paddr += r->size;
|
||||
}
|
||||
}
|
||||
break;
|
||||
}
|
||||
|
||||
/* map the interrupt */
|
||||
pin = pci_config_readb(d, PCI_INTERRUPT_PIN);
|
||||
if (pin != 0) {
|
||||
pin = pci_slot_get_pirq(d, pin - 1);
|
||||
pic_irq = pci_irqs[pin];
|
||||
pci_config_writeb(d, PCI_INTERRUPT_LINE, pic_irq);
|
||||
}
|
||||
}
|
||||
|
||||
/*
|
||||
* This function initializes the PCI devices as a normal PCI BIOS
|
||||
* would do. It is provided just in case the BIOS has no support for
|
||||
* PCI.
|
||||
*/
|
||||
void pci_bios_init(void)
|
||||
{
|
||||
int i, irq;
|
||||
uint8_t elcr[2];
|
||||
|
||||
pci_bios_io_addr = 0xc000;
|
||||
pci_bios_mem_addr = 0xf0000000;
|
||||
|
||||
/* activate IRQ mappings */
|
||||
elcr[0] = 0x00;
|
||||
elcr[1] = 0x00;
|
||||
for(i = 0; i < 4; i++) {
|
||||
irq = pci_irqs[i];
|
||||
/* set to trigger level */
|
||||
elcr[irq >> 3] |= (1 << (irq & 7));
|
||||
/* activate irq remapping in PIIX */
|
||||
pci_config_writeb(piix3_dev, 0x60 + i, irq);
|
||||
}
|
||||
isa_outb(elcr[0], 0x4d0);
|
||||
isa_outb(elcr[1], 0x4d1);
|
||||
|
||||
pci_bios_next_bus = 1;
|
||||
pci_for_each_device(0, pci_bios_init_device);
|
||||
}
|
||||
|
||||
|
|
|
|||
Loading…
Reference in a new issue