First, adjust load_symbols to accept a load_bias parameter. At the same
time, read the entire section header table in one go, use pread instead
f lseek+read for the symbol and string tables, and properly free
allocated structures on error exit paths.
Second, adjust load_elf_interp to compute load_bias. This requires
finding out the built-in load addresses. Which allows us to honor a
pre-linked interpreter image when possible, and eliminate the hard-coded
INTERP_MAP_SIZE value.
Signed-off-by: Richard Henderson <rth@twiddle.net>
Signed-off-by: Edgar E. Iglesias <edgar.iglesias@gmail.com>
Remove ifdefs from code by defining empty inline functions
when byte swapping isn't needed. Push loops over swapping
arrays of structures into the swapping functions.
Signed-off-by: Richard Henderson <rth@twiddle.net>
Signed-off-by: Edgar E. Iglesias <edgar.iglesias@gmail.com>
The only consideration on this value is the target endianness.
The existing defines were incorrect for alpha and sh4eb.
Signed-off-by: Richard Henderson <rth@twiddle.net>
Signed-off-by: Edgar E. Iglesias <edgar.iglesias@gmail.com>
Define BPRM_BUF_SIZE to 1k and read that amount initially. If the
data we want from the binary is in this buffer, use it instead of
reading from the file again.
Signed-off-by: Richard Henderson <rth@twiddle.net>
Signed-off-by: Edgar E. Iglesias <edgar.iglesias@gmail.com>
Moving some PPC AT_* constants from elfload.c at the same time.
Signed-off-by: Richard Henderson <rth@twiddle.net>
Signed-off-by: Edgar E. Iglesias <edgar.iglesias@gmail.com>
I caught padzero not properly initializing the .bss segment
on a statically linked Alpha program. Rather than a minimal
patch, replace the gross code with a single mmap+memset.
Share more code between load_elf_interp and load_elf_binary.
Legally, an ELF program need not have just a single .bss;
and PT_LOAD segment can have memsz > filesz.
Signed-off-by: Richard Henderson <rth@twiddle.net>
Signed-off-by: Edgar E. Iglesias <edgar.iglesias@gmail.com>
There is disagreement between microblaze glibc and the kernel
to what the third arg of signal handlers should point to.
Change QEMU linux-user to match the kernel port. glibc patches
are pending.
Signed-off-by: Edgar E. Iglesias <edgar.iglesias@petalogix.com>
As it is done for qemu-system with "-cpu ?", when cpu_list_id() is missing
for a target, call cpu_list() instead.
Signed-off-by: Laurent Vivier <laurent@vivier.eu>
Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
When loading a shared library that requires an executable stack,
glibc uses the mprotext PROT_GROWSDOWN flag to achieve this.
We don't support PROT_GROWSDOWN.
Add a special case to handle changing the stack permissions in this way.
Signed-off-by: Paul Brook <paul@codesourcery.com>
There's no _llseek on s390x either. Replace the existing
test for __x86_64__ with a functional test for __NR_llseek.
Signed-off-by: Richard Henderson <rth@twiddle.net>
Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
Since we're no longer setting PAGE_RESERVED, there's no need to
implement qemu_malloc via mmap.
Signed-off-by: Richard Henderson <rth@twiddle.net>
Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
Libc will fallback gracefully if pselect6 is not available. Thus put
pselect6 to nowarn until the atomicity issues of the original pselect6
patch are dealt with.
Signed-off-by: Riku Voipio <riku.voipio@nokia.com>
Cc: Michael Casadevall <mcasadevall@ubuntu.com>
Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
This will allow backends to make intelligent choices about how
to implement GUEST_BASE.
Signed-off-by: Richard Henderson <rth@twiddle.net>
Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
Alpha passes oldset by value in a register, and returns the newset
as the return value; as compared to the standard implementation in
which both are passed by reference. This requires being able to
distinguish negative return values that are not errors. Do this in
the same way as the Alpha Linux kernel, by storing a zero in V0 in
the implementation of the syscall.
At the same time, fix a think-o in the regular sigprocmask path in
which we passed the target, rather than the host, HOW value.
Signed-off-by: Richard Henderson <rth@twiddle.net>
Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
Alpha passes the signal set in a register, not by reference.
Signed-off-by: Richard Henderson <rth@twiddle.net>
Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
At the same time, tidy the code wrt MIPS and SH4 which have the
same two register return mechanism. Fix confusion between pipe
and pipe2 with an explicit flags=0, when the guest will not be
using the two register return mechanism.
Signed-off-by: Richard Henderson <rth@twiddle.net>
Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
189 was allocated in upstream binutils.
0xbaab was the old temporary value. Still used by some tools and the
linux kernel.
I've seen 115 in older gdb versions, but lets ignore that one.
Signed-off-by: Edgar E. Iglesias <edgar.iglesias@gmail.com>
rlim_t conversion between host and target added.
Otherwise there are some incorrect case like
- RLIM_INFINITY on 32bit target -> 64bit host.
- RLIM_INFINITY on 64bit host -> mips and sparc target ?
- Big value(for 32bit target) on 64bit host -> 32bit target.
One is added into getrlimit, setrlimit, and ugetrlimit. It converts both
RLIM_INFINITY and value bigger than target can hold(>31bit) to RLIM_INFINITY.
Another one is added to guest_stack_size calculation introduced by
703e0e89. The rule is mostly same except the result on the case is keeping
the value of guest_stack_size.
Slightly tested for SH4, and x86_64 -linux-user on x86_64-pc-linux host.
Signed-off-by: Takashi YOSHII <takasi-y@ops.dti.ne.jp>
Acked-by: Richard Henderson <rth@twiddle.net>
Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
Recalculate Sparc64 CPU flags on interrupts, otherwise some earlier
flags could be stored to pstate.
Refactor PSR/CCR/CWP handling: concentrate the actual
functions to op_helper.c.
Thanks to Igor Kovalenko for reporting.
Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
The usermode PAGE_RESERVED code is not required by the current mmap
implementation, and is already broken when guest_base != 0.
Unfortunately the bsd emulation still uses the old mmap implementation,
so we can't rip it out altogether.
Signed-off-by: Paul Brook <paul@codesourcery.com>
Use an exception plus start_exclusive to implement the compare-and-swap.
This follows the example set by the MIPS and PPC ports.
Signed-off-by: Richard Henderson <rth@twiddle.net>
Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
This is a per-cpu flag; there's no need for a spinlock of any kind.
We were also failing to manipulate the flag with $31 as a target reg
and failing to clear the flag on execution of a return-from-interrupt
instruction.
Signed-off-by: Richard Henderson <rth@twiddle.net>
Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
Check TARGET_ABI_BITS, not TARGET_LONG_BITS, when deciding
whether or not the guest needs special 64-bit stat translation.
Signed-off-by: Richard Henderson <rth@twiddle.net>
Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
The ABI-specific types used by linux_binprm and image_info
are different after forcing TARGET_ABI32 on. Which means
that the parameters that load_elf_binary_multi sees are not
those that loader_exec passed. This is inherently broken
and is more trouble than it's worth fixing.
Signed-off-by: Richard Henderson <rth@twiddle.net>
Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
2nd arg of page_set_flags() should be start+size, but size.
Signed-off-by: Takashi YOSHII <takasi-y@ops.dti.ne.jp>
Acked-by: Richard Henderson <rth@twiddle.net>
Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
Commit c05c7a7306
breaks cross compilation for mips (and other
compilations without CONFIG_INOTIFY1):
make[1]: Entering directory `/qemu/bin/mips'
CC i386-linux-user/syscall.o
cc1: warnings being treated as errors
/qemu/linux-user/syscall.c: In function ‘do_syscall’:
/qemu/linux-user/syscall.c:7067: error: implicit declaration of function ‘sys_inotify_init1’
Cc: Riku Voipio <riku.voipio@nokia.com>
Cc: Aurelien Jarno <aurelien@aurel32.net>
Signed-off-by: Stefan Weil <weil@mail.berlios.de>
Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
ia64 has some strangenesses that need to be workaround:
- it has a __clone2() syscall instead of the using clone() one, with
different arguments, and which is not declared in the usual headers.
- ucontext.uc_sigmask is declared with type long int, while it is
actually of type sigset_t.
- uc_mcontext, uc_sigmask, uc_stack, uc_link are declared using #define,
which clashes with the target_ucontext fields. Change their names to
tuc_*, as already done for some target architectures.
Arrange various declarations so that also non-CPU code can access
them, adjust users.
Move CPU specific code to cpus.c.
Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
The dynamic linker converts the Linux layout to the AIX layout and is
reentrant so it won't do it a second time if it's already been
converted. In short it work just fine with either register layout.
OTOH, statically linked binaries expect a Linux layout.
Remove code converting the Linux layout to AIX layout so that all
binaries are presented the Linux Layout.
Signed-off-by: Rob Landley <rob@landley.net>
Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
The current default stack limit of 512kB is far too small; a fair
number of gcc testsuite failures (for all guests) are directly
attributable to this. Using the -s option in every invocation of
the emulator is annoying to say the least.
A reasonable compromise seems to be to honor the system rlimit.
At least on two Linux distributions, this is set to 8MB and 10MB
respectively. If the system does not limit the stack, then we're
no worse off than before.
At the same time, rename the variable from x86_stack_size and
change the ultimate fallback size from 512kB to 8MB.
Signed-off-by: Richard Henderson <rth@twiddle.net>
Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
As this is now supported in newer linux kernels.
Signed-off-by: Michael Casadevall <mcasadevall@ubuntu.com>
Signed-off-by: Riku Voipio <riku.voipio@nokia.com>
Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
New syscall which gets actively used when you have a
fresh kernel.
Signed-off-by: Riku Voipio <riku.voipio@nokia.com>
Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
When building with -DNDEBUG, assert(0) will not stop execution
so it must not be used for abnormal termination.
Use cpu_abort() when in CPU context, abort() otherwise.
Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
Don't return addresses that aren't properly aligned for the guest,
e.g. when the guest has a larger page size than the host. Don't
return addresses that are outside the virtual address space for the
target, by paying proper attention to the h2g/g2h macros.
At the same time, place the default mapping base for 64-bit guests
(on 64-bit hosts) outside the low 4G. Consistently interpret
mmap_next_start in the guest address space.
Signed-off-by: Richard Henderson <rth@twiddle.net>
As "todo" comment in source code.
And modify restore_sigcontext() to have three args as kernel's does.
Signed-off-by: Takashi YOSHII <takasi-y@ops.dti.ne.jp>
Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
On linux/sh4
pipe() return values by r0:r1 as SH C calling convention.
pipe2() return values on memory as traditional unix way.
Signed-off-by: Takashi YOSHII <takasi-y@ops.dti.ne.jp>
Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
Move userland PALcode handling into linux-user main loop so that
we can send signals from there. This also makes alpha_palcode.c
system-level only, so don't build it for userland. Add defines
for GENTRAP PALcall mapping to signals.
Signed-off-by: Richard Henderson <rth@twiddle.net>
Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
The existing set of IPRs is totally irrelevant to user-mode emulation.
Indeed, they most are irrelevant to implementing kernel-mode emulation,
and would only be relevant to PAL-mode emulation, which I suspect that
no one will ever attempt.
Reducing the set of processor registers reduces the size of the CPU state.
Signed-off-by: Richard Henderson <rth@twiddle.net>
Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
This is a reimplementation of prior versions which adds
the ability to define cpu models for contemporary processors.
The added models are likewise selected via -cpu <name>,
and are intended to displace the existing convention
of "-cpu qemu64" augmented with a series of feature flags.
A primary motivation was determination of a least common
denominator within a given processor class to simplify guest
migration. It is still possible to modify an arbitrary model
via additional feature flags however the goal here was to
make doing so unnecessary in typical usage. The other
consideration was providing models names reflective of
current processors. Both AMD and Intel have reviewed the
models in terms of balancing generality of migration vs.
excessive feature downgrade relative to released silicon.
This version of the patch replaces the prior hard wired
definitions with a configuration file approach for new
models. Existing models are thus far left as-is but may
easily be transitioned to (or may be overridden by) the
configuration file representation.
Proposed new model definitions are provided here for current
AMD and Intel processors. Each model consists of a name
used to select it on the command line (-cpu <name>), and a
model_id which corresponds to a least common denominator
commercial instance of the processor class.
A table of names/model_ids may be queried via "-cpu ?model":
:
x86 Opteron_G3 AMD Opteron 23xx (Gen 3 Class Opteron)
x86 Opteron_G2 AMD Opteron 22xx (Gen 2 Class Opteron)
x86 Opteron_G1 AMD Opteron 240 (Gen 1 Class Opteron)
x86 Nehalem Intel Core i7 9xx (Nehalem Class Core i7)
x86 Penryn Intel Core 2 Duo P9xxx (Penryn Class Core 2)
x86 Conroe Intel Celeron_4x0 (Conroe/Merom Class Core 2)
:
Also added is "-cpu ?dump" which exhaustively outputs all config
data for all defined models, and "-cpu ?cpuid" which enumerates
all qemu recognized CPUID feature flags.
The pseudo cpuid flag 'check' when added to the feature flag list
will warn when feature flags (either implicit in a cpu model or
explicit on the command line) would have otherwise been quietly
unavailable to a guest:
# qemu-system-x86_64 ... -cpu Nehalem,check
warning: host cpuid 0000_0001 lacks requested flag 'sse4.2|sse4_2' [0x00100000]
warning: host cpuid 0000_0001 lacks requested flag 'popcnt' [0x00800000]
A similar 'enforce' pseudo flag exists which in addition
to the above causes qemu to error exit if requested flags are
unavailable.
Configuration data for a cpu model resides in the target config
file which by default will be installed as:
/usr/local/etc/qemu/target-<arch>.conf
The format of this file should be self explanatory given the
definitions for the above six models and essentially mimics
the structure of the static x86_def_t x86_defs.
Encoding of cpuid flags names now allows aliases for both the
configuration file and the command line which reconciles some
Intel/AMD/Linux/Qemu naming differences.
This patch was tested relative to qemu.git.
Signed-off-by: john cooper <john.cooper@redhat.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
This patch for linux-user adapts the output of the emulated uname()
syscall to match the configured CPU. Tested with x86, x86-64 and arm
emulation.
Signed-off-by: Riku Voipio <riku.voipio@iki.fi>
Signed-off-by: Loïc Minier <lool@dooz.org>
CC i386-linux-user/mmap.o
cc1: warnings being treated as errors
/usr/src/RPM/BUILD/qemu-0.11.92/linux-user/mmap.c: In function 'mmap_frag':
/usr/src/RPM/BUILD/qemu-0.11.92/linux-user/mmap.c:253: error: ignoring return value of 'pread', declared with attribute warn_unused_result
/usr/src/RPM/BUILD/qemu-0.11.92/linux-user/mmap.c: In function 'target_mmap':
/usr/src/RPM/BUILD/qemu-0.11.92/linux-user/mmap.c:477: error: ignoring return value of 'pread', declared with attribute warn_unused_result
make[1]: *** [mmap.o] Error 1
Signed-off-by: Kirill A. Shutemov <kirill@shutemov.name>
Signed-off-by: Juan Quintela <quintela@redhat.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
The stat64/fstat64 syscalls are broken for alpha linux-user.
This is because Alpha, even though it is native 64-bits, has a stat64
syscall that is different than regular stat. This means that the
"TARGET_LONG_BITS==64" check in syscall.c isn't enough. Below is
a patch that fixes things for me, although it might not be the cleanest
fix.
This issue keeps sixtrack and fma3d spec2k benchmarks from running.
Signed-off-by: Vince Weaver <vince@csl.cornell.edu>
Acked-by: Richard Henderson <rth@twiddle.net>
Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
For what I know DCR is always 32 bits wide, so we should also use uint32_t to
pass it along the stacks.
This fixes a warning when compiling qemu-system-ppc64 with KVM enabled, making
it compile without --disable-werror
Signed-off-by: Alexander Graf <agraf@suse.de>
Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
Fix the alternate time base the same way as the default timebase. SPR_ATBL
should return a 64-bit value on 64 bit implementations.
Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
On PPC we have a 64-bit time base. Usually (PPC32) this is accessed using
two separate 32 bit SPR accesses to SPR_TBU and SPR_TBL.
On PPC64 the SPR_TBL register acts as 64 bit though, so we get the full
64 bits as return value. If we only take the lower ones, fine. But Linux
wants to see all 64 bits or it breaks.
This patch makes PPC64 Linux work even after TB crossed the 32-bit boundary,
which usually happened a few seconds after bootup.
Signed-off-by: Alexander Graf <agraf@suse.de>
Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
Alpha always used 32-bit uids, but never renamed the syscalls
to match i386 when 32-bit uids were added there. This enables
the proper bits in syscall.c.
Signed-off-by: Richard Henderson <rth@twiddle.net>
Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
There's no sense in separately declaring target_{elf_greg,uid,gid,pid}_t
for every architecture. Just declare them once with appropriate
USE_UID16 handling.
Signed-off-by: Nathan Froyd <froydnj@codesourcery.com>
Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
Force_sig should be always called with TARGET_ signals.
Not that it really matters with SEGV, so this patch is
just for cleanup and improving consistency.
Signed-off-by: Riku Voipio <riku.voipio@nokia.com>
Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
mmap_lock() can be called while tb_lock() is being held. To
avoid deadlock when one thread is holding mmap_lock and another
tb_lock, _always_ lock first tb_lock().
Signed-off-by: Riku Voipio <riku.voipio@nokia.com>
Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
1. Add correct definitions of error numbers.
2. Implement SYS_osf_sigprocmask
3. Implement SYS_osf_get/setsysinfo for IEEE_FP_CONTROL.
This last requires exposing the FPCR value to do_syscall.
Since this value is actually split up into the float_status,
expose routines from helper.c to access it.
Finally, also add a float_exception_mask field to float_status.
We don't actually use it to control delivery of exceptions to
the emulator yet, but simply hold the value that we placed there
when loading/storing the FPCR.
Signed-off-by: Richard Henderson <rth@twiddle.net>
Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
In a bunch of places, 64 is used as value of _NSIG but it's wrong
at least on MIPS were _NSIG is 128.
Based on a patch from Arnaud Patard <arnaud.patard@rtp-net.org>
Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
The variable CP0_LLAddr represent the full lladdr, not the actual
register value, which is only part of this value and depends on the
CPU.
Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
b55a37c981 moved the call to cpu_reset
to user emulators. But cpu_copy also initializes a CPU structure, so add the
call also there.
Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
everything needed to run SDL on a framebuffer device in the userspace emulator
Signed-off-by: Ulrich Hecht <uli@suse.de>
Signed-off-by: Riku Voipio <riku.voipio@iki.fi>
prepare_binprm() zeroes bprm->buf. That buffer is already zeroed in
main() and hasn't been touched since so that is not necessary.
Signed-off-by: Paul Bolle <pebolle@tiscali.nl>
Signed-off-by: Riku Voipio <riku.voipio@iki.fi>
Swap __pad1 and st_blocks fields location to maintain proper alignment.
This fixes incorrect 'du' and 'stat' report on ppc guest.
Signed-off-by: Max Filippov <jcmvbkbc@gmail.com>
Signed-off-by: Riku Voipio <riku.voipio@iki.fi>
updated fallocate check to new configure, added dup3 check as suggested
by Jan-Simon Möller.
Riku: updated to apply to current git.
Signed-off-by: Ulrich Hecht <uli@suse.de>
Signed-off-by: Riku Voipio <riku.voipio@iki.fi>
Make an "#if 0"'d printf() in load_elf_binary(), probably left to aid in
debugging, reflect what the actual code does. The current printf() will
only confuse those who "#if 1" it (it certainly confused me enough to
write this trivial patch).
Signed-off-by: Paul Bolle <pebolle@tiscali.nl>
Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>