Refactor nbd_read_eof to return 1 on success, 0 on eof, when no
data was read and <0 for other cases, because returned size of
read data is not actually used.
Signed-off-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
Message-Id: <20170804151440.320927-3-vsementsov@virtuozzo.com>
[eblake: tweak function comments, rebase to test 083 enhancements]
Signed-off-by: Eric Blake <eblake@redhat.com>
083 only tests TCP. Some failures might be specific to UNIX domain
sockets.
A few adjustments are necessary:
1. Generating a port number and waiting for server startup is
TCP-specific. Use the new nbd-fault-injector.py startup protocol to
fetch the address. This is a little more elegant because we don't
need netstat anymore.
2. The NBD filter does not work for the UNIX domain sockets URIs we
generate and must be extended.
3. Run all tests twice: once for TCP and once for UNIX domain sockets.
Reviewed-by: Eric Blake <eblake@redhat.com>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Message-Id: <20170829122745.14309-4-stefanha@redhat.com>
Signed-off-by: Eric Blake <eblake@redhat.com>
Currently 083 waits for the nbd-fault-injector.py server to start up by
looping until netstat shows the TCP listen socket.
The startup protocol can be simplified by passing a 0 port number to
nbd-fault-injector.py. The kernel will allocate a port in bind(2) and
the final port number can be printed by nbd-fault-injector.py.
This should make it slightly nicer and less TCP-specific to wait for
server startup. This patch changes nbd-fault-injector.py, the next one
will rewrite server startup in 083.
Reviewed-by: Eric Blake <eblake@redhat.com>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Message-Id: <20170829122745.14309-3-stefanha@redhat.com>
Signed-off-by: Eric Blake <eblake@redhat.com>
This is the follow-up patch that was discussed[*] as part of feedback to
qemu-iotest 194.
Changes in this patch:
- Supply 'job-id' parameter to `drive-mirror` invocation.
- Once migration completes, issue QMP `block-job-cancel` command on
the source QEMU to gracefully complete `drive-mirror` operation.
- Once the BLOCK_JOB_COMPLETED event is emitted, stop the NBD server
on the destination QEMU.
- Check for both the events: MIGRATION and BLOCK_JOB_COMPLETED.
With the above, the test will also be (almost) in sync with the
procedure outlined in the document 'live-block-operations.rst'[+]
(section: "QMP invocation for live storage migration with
``drive-mirror`` + NBD").
[*] https://lists.nongnu.org/archive/html/qemu-devel/2017-08/msg04820.html
-- qemu-iotests: add 194 non-shared storage migration test
[+] https://git.qemu.org/gitweb.cgi?p=qemu.git;a=blob;f=docs/interop/live-block-operations.rst
Signed-off-by: Kashyap Chamarthy <kchamart@redhat.com>
Message-Id: <20170829165058.8229-1-kchamart@redhat.com>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Signed-off-by: Eric Blake <eblake@redhat.com>
With some small modifications, we can also use the the netfilter,
the filter-mirror and the filter-redirector tests on s390x.
Signed-off-by: Thomas Huth <thuth@redhat.com>
Reviewed-by: Cornelia Huck <cohuck@redhat.com>
Message-Id: <1502951113-4246-3-git-send-email-thuth@redhat.com>
Reviewed-by: Zhang Chen <zhangchen.fnst@cn.fujitsu.com>
Signed-off-by: Cornelia Huck <cohuck@redhat.com>
This way we can get rid of the ugly #ifdefs in the code which makes
it easier to extend later.
Signed-off-by: Thomas Huth <thuth@redhat.com>
Reviewed-by: Cornelia Huck <cohuck@redhat.com>
Message-Id: <1502951113-4246-2-git-send-email-thuth@redhat.com>
Reviewed-by: David Hildenbrand <david@redhat.com>
Reviewed-by: Zhang Chen <zhangchen.fnst@cn.fujitsu.com>
Signed-off-by: Cornelia Huck <cohuck@redhat.com>
Now that we've got a firmware that can do TFTP booting on s390x (i.e.
the pc-bios/s390-netboot.img), we can enable the PXE tester for this
architecture, too.
Signed-off-by: Thomas Huth <thuth@redhat.com>
Reviewed-by: Cornelia Huck <cohuck@redhat.com>
Message-Id: <1502431076-22849-3-git-send-email-thuth@redhat.com>
Signed-off-by: Cornelia Huck <cohuck@redhat.com>
Re-using the boot_sector code buffer from x86 for other architectures
is not very nice, especially if we add more architectures later. It's
also ugly that the test uses a huge pre-initialized array at all - the
size of the executable is very huge due to this array. So let's use a
separate buffer for each architecture instead, allocated from the heap,
so that we really just use the memory that we need.
Suggested-by: Michael Tsirkin <mst@redhat.com>
Signed-off-by: Thomas Huth <thuth@redhat.com>
Reviewed-by: Cornelia Huck <cohuck@redhat.com>
Message-Id: <1502431076-22849-2-git-send-email-thuth@redhat.com>
Signed-off-by: Cornelia Huck <cohuck@redhat.com>
Add the scripts/ directory to sys.path so Python 2.6 will be able to
import argparse.
Cc: Daniel P. Berrange <berrange@redhat.com>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Acked-by: John Snow <jsnow@redhat.com>
Acked-by: Fam Zheng <famz@redhat.com>
Message-id: 20170825155732.15665-4-stefanha@redhat.com
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Add the scripts/ directory to sys.path so Python 2.6 will be able to
import argparse.
Cc: Fam Zheng <famz@redhat.com>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Acked-by: John Snow <jsnow@redhat.com>
Acked-by: Fam Zheng <famz@redhat.com>
Message-id: 20170825155732.15665-3-stefanha@redhat.com
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Both the throttling limits set with the throttling.iops-* and
throttling.bps-* options and their QMP equivalents defined in the
BlockIOThrottle struct are integer values.
Those limits are also reported in the BlockDeviceInfo struct and they
are integers there as well.
Therefore there's no reason to store them internally as double and do
the conversion everytime we're setting or querying them, so this patch
uses uint64_t for those types. Let's also use an unsigned type because
we don't allow negative values anyway.
LeakyBucket.level and LeakyBucket.burst_level do however remain double
because their value changes depending on the fraction of time elapsed
since the previous I/O operation.
Signed-off-by: Alberto Garcia <berto@igalia.com>
Message-id: f29b840422767b5be2c41c2dfdbbbf6c5f8fedf8.1503580370.git.berto@igalia.com
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Non-shared storage migration with NBD and drive-mirror is currently not
tested by qemu-iotests. This test case covers the basic migration
scenario.
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Based-on: <20170823134242.12080-1-famz@redhat.com>
Message-Id: <20170823140506.28723-1-stefanha@redhat.com>
Tested-by: Eric Blake <eblake@redhat.com>
Signed-off-by: Eric Blake <eblake@redhat.com>
Prefer to use the tcg accelarator if it is available: This is our only
real smoke test for tcg, and fast enough to use it for that.
Fixes: 480bc11e6 ("boot-serial-test: fallback to kvm accelerator")
Reported-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Cornelia Huck <cohuck@redhat.com>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
The 093 throttling test submits twice as many requests as the throttle
limit in order to ensure that we reach the limit. The remaining
requests are left in-flight at the end of each test iteration.
Commit 452589b6b4 ("vl.c/exit: pause cpus
before closing block devices") exposed a hang in 093. This happens
because requests are still in flight when QEMU terminates but
QEMU_CLOCK_VIRTUAL time is frozen. bdrv_drain_all() hangs forever since
throttled requests cannot complete.
Step the clock at the end of each test iteration so in-flight requests
actually finish. This solves the hang and is cleaner than leaving tests
in-flight.
Note that this could also be "fixed" by disabling throttling when drives
are closed in QEMU. That approach has two issues:
1. We must drain requests before disabling throttling, so the hang
cannot be easily avoided!
2. Any time QEMU disables throttling internally there is a chance that
malicious users can abuse the code path to bypass throttling limits.
Therefore it makes more sense to fix the test case than to modify QEMU.
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Message-Id: <20170815130502.8736-1-stefanha@redhat.com>
Signed-off-by: Eric Blake <eblake@redhat.com>
This ease rebase/cherry-pick, also it is faster to visually find if a package
is here.
Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Message-Id: <20170728233316.13352-2-f4bug@amsat.org>
Signed-off-by: Fam Zheng <famz@redhat.com>
Currently if you do "make check-help" in a fresh checkout, only an error
is printed which is not nice:
$ make check-help V=1
cc -nostdlib -o check-help.mo
cc: fatal error: no input files
compilation terminated.
rules.mak:115: recipe for target 'check-help.mo' failed
make: *** [check-help.mo] Error 1
Move the config-host.mak condition into the body of
tests/Makefile.include and always include the rule for check-help.
Reported-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Signed-off-by: Fam Zheng <famz@redhat.com>
Message-Id: <20170810085025.14076-1-famz@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Tested-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Signed-off-by: Fam Zheng <famz@redhat.com>
The check script contains a commented out root user requirement,
probably because of its xfstests heritage. This requirement doesn't
apply to qemu-iotests, so it better be gone.
Signed-off-by: Cleber Rosa <crosa@redhat.com>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
The variables FULL_MKFS_OPTIONS and FULL_MOUNT_OPTIONS are commented
out, never used, and even refer to functions that do exist. The last
time these were touched was around 8 years ago, so I guess it's safe
to assume outputting such information on test execution is still on the
radar.
Signed-off-by: Cleber Rosa <crosa@redhat.com>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
Although this function is used, its implementation does nothing
besides echoing a variable name. There's no need to wrap this
functionality in a function, and based on the one usage it has, it's
not even required to adhere to a convention or code style.
Signed-off-by: Cleber Rosa <crosa@redhat.com>
Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
s/continuosly/continuously/
Signed-off-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Jeff Cody <jcody@redhat.com>
Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
Currently, at least x86_64 and s390x support building with --disable-tcg.
Instead of forcing tcg (which causes the test to fail on such builds),
allow to use kvm as well.
Reviewed-by: Daniel P. Berrange <berrange@redhat.com>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Signed-off-by: Cornelia Huck <cohuck@redhat.com>
185 can sometimes produce wrong output like this:
185 2s ... - output mismatch (see 185.out.bad)
--- /work/src/qemu/master/tests/qemu-iotests/185.out 2017-07-14 \
15:14:29.520343805 +0300
+++ 185.out.bad 2017-08-07 16:51:02.231922900 +0300
@@ -37,7 +37,7 @@
{"return": {}}
{"return": {}}
{"timestamp": {"seconds": TIMESTAMP, "microseconds": TIMESTAMP}, \
"event": "SHUTDOWN", "data": {"guest": false}}
-{"timestamp": {"seconds": TIMESTAMP, "microseconds": TIMESTAMP}, \
"event": "BLOCK_JOB_CANCELLED", "data": {"device": "disk", \
"len": 4194304, "offset": 4194304, "speed": 65536, "type": \
"mirror"}}
+{"timestamp": {"seconds": TIMESTAMP, "microseconds": TIMESTAMP}, \
"event": "BLOCK_JOB_CANCELLED", "data": {"device": "disk", \
"len": 0, "offset": 0, "speed": 65536, "type": "mirror"}}
=== Start backup job and exit qemu ===
Failures: 185
Failed 1 of 1 tests
This is because, under heavy load, the quit can happen before the first
iteration of the mirror request has occurred. To make sure we've had
time to iterate, let's just add a sleep for 0.5 seconds before quitting.
Signed-off-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Commit b43671f8 accidentally broke run_test.sh within tests/multiboot;
due to a subtle change in whitespace.
These two commands produce theh same output (at least, for sane $IFS
of space-tab-newline):
echo -e "...$@..."
echo -e "...$*..."
But that's only because echo inserts spaces between multiple arguments
(the $@ case), while the $* form gives a single argument to echo with
the spaces already present.
But when converting to printf %b, there are no automatic spaces between
multiple arguments, so we HAVE to use $*.
It doesn't help that run_test.sh isn't part of 'make check'.
Signed-off-by: Eric Blake <eblake@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Signed-off-by: John Snow <jsnow@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Message-id: 20170809160212.29976-3-stefanha@redhat.com
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Currently abort handlers only work for the first test function
in a testcase, because the list of abort handlers is not properly
cleared when qtest_quit() is called.
qtest_quit() only deletes the kill_qemu_hook but doesn't completely
clear the abrt_hooks list. The effect is that abrt_hooks.is_setup is
never set to false and in a following test the abrt_hooks list is not
initialized and setup_sigabrt_handler() is not called.
One way to solve this is to clear the list in qtest_quit(), but
that means only asserts between qtest_start and qtest_quit will
be catched by the abort handler.
We can make abort handlers work in all cases if we always setup the
signal handler for SIGABRT in qtest_init.
Signed-off-by: Jens Freimann <jfreimann@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
This serves as a regression test for the bugs that were just fixed for
bdrv_reopen() between read-only and read-write mode.
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Jeff Cody <jcody@redhat.com>
Reviewed-by: John Snow <jsnow@redhat.com>
This option was only added to allow 'null-co://' and 'null-aio://' as
filenames, its value never served any actual purpose and was ignored.
Nevertheless it was accepted as '-drive driver=null,filename=foo'.
The correct way to enable the protocol prefixes (and that without adding
a useless -drive option) is implementing .bdrv_parse_filename. This is
what this patch does.
Technically, this is an incompatible change, but the null block driver
is only used for benchmarking, testing and debugging, and an option
without effect isn't likely to be used by anyone anyway, so no bad
effects are to be expected.
Reported-by: Markus Armbruster <armbru@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Jeff Cody <jcody@redhat.com>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
A race condition is currently present between the clean up attempt of
the QEMU process and the execution of qemu-img. The actual (bad)
output is:
-Warning: Image size mismatch!
-Images are identical.
+qemu-img: Could not open '<build_dir>/tests/qemu-iotests/scratch/t.raw': Failed to get "consistent read" lock
+Is another process using the image?
A KILL signal is sent to the QEMU process, but qemu-img may begin to
run before the QEMU process is really gone. qemu-img will then
attempt to open the TEST_IMG file before it can secure a lock on it.
This attempts a more graceful shutdown, and waits for the QEMU process
to exit.
Signed-off-by: Cleber Rosa <crosa@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Jeff Cody <jcody@redhat.com>
Reviewed-by: John Snow <jsnow@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Learn to compile out vhost-user (net, scsi & upcoming users). Keep it
enabled by default on non-win32, that is assumed to be POSIX. Fail if
trying to enable it on win32.
When trying to make a vhost-user netdev, it gives the following error:
-netdev vhost-user,id=foo,chardev=chr-test: Parameter 'type' expects a netdev backend type
And similar error with the HMP/QMP monitors.
While at it, rename CONFIG_VHOST_NET_TEST CONFIG_VHOST_USER_NET_TEST
since it's a vhost-user specific variable.
Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Reviewed-by: Cornelia Huck <cohuck@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
testchardev2 is not a valid chardev id here. Use testchardev1
instead which has been created with chardev-add right before
the 'chardev-send-break' line.
And while we're at it, add the test-hmp.c file to the MAINTAINERS
file, too.
Signed-off-by: Thomas Huth <thuth@redhat.com>
Reviewed-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Message-id: 1501149097-19071-1-git-send-email-thuth@redhat.com
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Some fixes all over the place. Notably vhost-user gained a new message
to set endian-ness. Borderline for 2.10 but seems to be the only way to
fix legacy guests. Also pc tests are run on kvm now. Not a fix at all
but doesn't touch qemu itself, so I merged it since I had to run these a
lot and I just got tired of waiting for these to finish.
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
-----BEGIN PGP SIGNATURE-----
iQEcBAABAgAGBQJZgPRvAAoJECgfDbjSjVRpUKAH/RE1PohaH/klzEVFLPZUdISN
/1zOdFN0BgVOUxS2udLVdZBUrWBiJWt11fbzASeGtOu3ruTpVfp69C7HUH8z4MOB
cyBWgtcf7qQc9cqE0VGO1kLU+ujSyPlkZonjWVfeCrf298SElIXUNVXcihqVsglA
VAL+tIUFT2Bbc3SH5xGsqHCMAy1hNRkEuF5t7enphOoxm7CdqghDLMfUEW65igYg
XNt3DELfFDQVnwGP8DWSWjgLVAvGAGWGNHQ9QD/FO5mdVrXh1lukV8ZtXf6K2VJc
svR670n3ZbMOkEIOGJYcYUFEKMgJXLNEpQX8WRM+vjnuEpDML6bBROtA8hckRv8=
=9TSs
-----END PGP SIGNATURE-----
Merge remote-tracking branch 'remotes/mst/tags/for_upstream' into staging
pc, acpi, virtio: fixes, test speedup for rc1
Some fixes all over the place. Notably vhost-user gained a new message
to set endian-ness. Borderline for 2.10 but seems to be the only way to
fix legacy guests. Also pc tests are run on kvm now. Not a fix at all
but doesn't touch qemu itself, so I merged it since I had to run these a
lot and I just got tired of waiting for these to finish.
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
# gpg: Signature made Tue 01 Aug 2017 22:36:47 BST
# gpg: using RSA key 0x281F0DB8D28D5469
# gpg: Good signature from "Michael S. Tsirkin <mst@kernel.org>"
# gpg: aka "Michael S. Tsirkin <mst@redhat.com>"
# gpg: WARNING: This key is not certified with a trusted signature!
# gpg: There is no indication that the signature belongs to the owner.
# Primary key fingerprint: 0270 606B 6F3C DF3D 0B17 0970 C350 3912 AFBE 8E67
# Subkey fingerprint: 5D09 FD08 71C8 F85B 94CA 8A0D 281F 0DB8 D28D 5469
* remotes/mst/tags/for_upstream:
pc: acpi: force FADT rev1 for 440fx based machine types
pc: make 'pc.rom' readonly when machine has PCI enabled
vhost-user: fix watcher need be removed when vhost-user hotplug
tests/bios-tables-test: Compiler warning fix
accel: cleanup error output
intel_iommu: use access_flags for iotlb
intel_iommu: fix iova for pt
vhost-user: fix legacy cross-endian configurations
vhost: fix a memory leak
tests: switch pxe and vm gen id tests to use kvm
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
gcc 7.1.1 in fedora 26 moans about the:
tables = g_new0(uint32_t, tables_nr)
because it can't convince itself that tables_nr is positive.
This is fallout from g_assert_cmpint no longer necessarily being
no-return; replace it with a plain g_assert.
Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Reviewed-by: Marcel Apfelbaum <marcel@redhat.com>
Speed up tests on host systems with kvm support.
Cc: Paolo Bonzini <pbonzini@redhat.com>
Cc: Thomas Huth <thuth@redhat.com>
Cc: Laurent Vivier <lvivier@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Acked-by: Paolo Bonzini <pbonzini@redhat.com>
qemu-iotests 059 left a whole lot of image files behind in the scratch
directory because VMDK creates additional files for extents and cleaning
them up requires the original image intact (it parses qemu-img info
output to find all extent files), but the image overwrote it many times
like it works for all other image formats.
In addition, _use_sample_img overwrites the TEST_IMG variable, causing
new images created afterwards to reuse the name of the sample file
rather than the usual t.IMGFMT.
This patch adds an intermediate _cleanup_test_img after each subtest
that created an image file with additional extent files, and also after
each use of a sample image. _cleanup_test_img is also changed so that it
resets TEST_IMG after a sample image is cleaned up.
Note that this test was failing before this commit and continues to do
so after it. This failure was introduced in commit 9877860 ('block/vmdk:
Report failures in vmdk_read_cid()') and needs to be dealt with
separately.
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Reviewed-by: Jeff Cody <jcody@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
qemu-iotests 063 left t.raw.raw1 behind in the scratch directory because
it used the wrong suffix. Make sure to clean it up after completing the
test.
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Reviewed-by: Jeff Cody <jcody@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
qemu-iotests 162 left qemu-nbd.pid behind in the scratch directory, and
potentially a file called '42' in the current directory. Make sure to
clean it up after completing the tests.
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Reviewed-by: Jeff Cody <jcody@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
qemu-iotests 153 left t.qcow2.c behind in the scratch directory. Make
sure to clean it up after completing the tests.
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Reviewed-by: Jeff Cody <jcody@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
qemu-iotests 141 attempted to use brace expansion to remove all images
with a single command. However, for this to work, the braces shouldn't
be quoted.
With this fix, the tests correctly cleans up its scratch images.
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Reviewed-by: Jeff Cody <jcody@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
qemu-iotests 074 and 179 left a blkdebug.conf behind in the scratch
directory. Make sure to clean up after completing the tests.
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Reviewed-by: Jeff Cody <jcody@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
qemu-iotests 041 left quorum_snapshot.img and target.img behind in the
scratch directory. Make sure to clean up after completing the tests.
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Reviewed-by: Jeff Cody <jcody@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
The new test 190 ensures we don't regress back to an infinite loop when
measuring the size of a 2T+ qcow2 image. I did not append to test 178,
because that test is also designed to run with format 'raw'; also, this
gives us some coverage of the measure command under the quick group.
Signed-off-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
We had a bug for multiple releases where dirty-bitmap count was
documented in bytes but reported in sectors; enhance the testsuite
to add coverage of DirtyBitmapInfo to ensure we do not regress again.
Signed-off-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Reviewed-by: John Snow <jsnow@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Without redirecting qemu's stderr to stdout, _filter_qemu will not apply
to warnings. This results in $QEMU_PROG not being replaced by QEMU_PROG
which is not great if your qemu executable is not called
qemu-system-x86_64 (e.g. qemu-system-i386).
Signed-off-by: Max Reitz <mreitz@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Jeff Cody <jcody@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
On one hand, the _make_test_img invocation for creating the target image
was missing a -u because its backing file is not supposed to exist at
that point.
On the other hand, nobody noticed probably because the backing file is
created later on and _cleanup failed to remove it: The quotation marks
were misplaced so bash tried to delete a file literally called
"$TEST_IMG{,.target}..." instead of performing brace expansion. Thus, the
files stayed around after the first run and qemu-img create did not
complain about a missing backing file on any run but the first.
Signed-off-by: Max Reitz <mreitz@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Jeff Cody <jcody@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
This allow a one liner from fresh repository clone, i.e.:
./configure && make -j check-qtest-aarch64
Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Reviewed-by: John Snow <jsnow@redhat.com>
Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
If slirp is disabled, it will fail with:
qemu-system-x86_64: -netdev user,id=qtest-bn0: Parameter 'type' expects a netdev backend type
Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
user_creatable_add_opts() returns a reference (the other reference is
for the root parent/child link).
Leak introduced in commit a1af255f06.
Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Reviewed-by: Markus Armbruster <armbru@redhat.com>
Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
Commits 70f17a1 ('error: Revert unwanted change of warning messages')
and e1824e5 ('qemu-iotests: Test 'info block'') had a semantic merge
conflict, which results in failure for qemu-iotests case 186. Fix the
reference output to consider the changes of 70f17a1.
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Message-id: 1500973176-29235-1-git-send-email-kwolf@redhat.com
Reviewed-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Signed-off-by: Max Reitz <mreitz@redhat.com>
Test cases 030, 041 and 055 used to sleep for a second after calling
block-job-pause to make sure that the block job had time to actually
get into paused state. We can instead poll its status and use that one
second only as a timeout.
The tests also slept a second for checking that the block jobs don't
make progress while being paused. Half a second is more than enough for
this.
These changes reduce the total time for the three tests by 25 seconds on
my laptop (from 155 seconds to 130).
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Commits 0db832f and 6cdbceb introduced the automatic insertion of filter
nodes above the top layer of mirror and commit block jobs. The
assumption made there was that since libvirt doesn't do node-level
management of the block layer yet, it shouldn't be affected by added
nodes.
This is true as far as commands issued by libvirt are concerned. It only
uses BlockBackend names to address nodes, so any operations it performs
still operate on the root of the tree as intended.
However, the assumption breaks down when you consider query commands,
which return data for the wrong node now. These commands also return
information on some child nodes (bs->file and/or bs->backing), which
libvirt does make use of, and which refer to the wrong nodes, too.
One of the consequences is that oVirt gets wrong information about the
image size and stops the VM in response as long as a mirror or commit
job is running:
https://bugzilla.redhat.com/show_bug.cgi?id=1470634
This patch fixes the problem by hiding the implicit nodes created
automatically by the mirror and commit block jobs in the output of
query-block and BlockBackend-based query-blockstats as long as the user
doesn't indicate that they are aware of those nodes by providing a node
name for them in the QMP command to start the block job.
The node-based commands query-named-block-nodes and query-blockstats
with query-nodes=true still show all nodes, including implicit ones.
This ensures that users that are capable of node-level management can
still access the full information; users that only know BlockBackends
won't use these commands.
Cc: qemu-stable@nongnu.org
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Reviewed-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Max Reitz <mreitz@redhat.com>
Tested-by: Eric Blake <eblake@redhat.com>
A run of './check -qcow2 -g quick' on my machine produced only
two tests that took longer than 5 seconds; 178 took 18, and
189 took 7. Remove them from the quick group.
Signed-off-by: Eric Blake <eblake@redhat.com>
Reviewed-by: John Snow <jsnow@redhat.com>
Reviewed-by: Jeff Cody <jcody@redhat.com>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
BlockdevRef is an alternate of BlockdevOptions (inline definition) and
str (reference to an existing block device by name). BlockdevRef
value "" is special: "no block device should be referenced." It's
actually interpreted that way in just one place: optional member
@backing of COW formats. Semantics:
* Present means "use this block device" as backing storage
* Absent means "default to the one stored in the image"
* Except "" means "don't use backing storage at all"
The first two are perfectly normal: when the parameter is absent, it
defaults to an implied value, but the value's meaning is the same.
The third one overloads the parameter with a second meaning. The
overloading is *implicit*, i.e. it's not visible in the types. Works
here, because "" is not a value block device ID.
Pressing argument values the schema accepts, but are semantically
invalid, into service to mean "do something else entirely" is not
general, as suitable invalid values need not exist. I also find it
ugly.
To clean this up, we could add a separate flag argument to suppress
@backing, or add a distinct value to @backing. This commit implements
the latter: add JSON null to the values of @backing, deprecate "".
Because we're so close to the 2.10 freeze, implement it in the
stupidest way possible: have qmp_blockdev_add() rewrite null to ""
before anything else can see the null. Works, because BlockdevRef
occurs only within arguments of blockdev-add. The proper way to do it
would be rewriting "" to null, preferably in a cleaner way, but that
requires fixing up code to work with null. Add a TODO comment for
that.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Daniel P. Berrange <berrange@redhat.com>
Acked-by: Kevin Wolf <kwolf@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
test_visitor_in_alternate() tests UserDefAlternate with inadmissible
input. test_visitor_in_fail_alternate() does basically the same.
Drop the former, keep the latter.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Daniel P. Berrange <berrange@redhat.com>
I expect the 'null' type to be useful mostly for members of alternate
types.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Daniel P. Berrange <berrange@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Make visit_type_null() take an @obj argument like its buddies. This
helps keep the next commit simple.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Daniel P. Berrange <berrange@redhat.com>
Tweaks from Paolo for J=x Travis compiles
Bunch of updated cross-compile targets from Philippe
Additional debug tools in travis image from Me
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1
iQEcBAABAgAGBQJZbdw6AAoJEPvQ2wlanipEd3UH/0z2oPZanlGonjPtmS2DjLmU
xvf5EgCNYE0VwBYqycSeXd5pVSVtfkAXi9EBIBzF64FjySV131k3T9iUGVnMHC8w
RzwSk/6FDldUhJWIeXRsMC1zwJuOyhe2PTZ228zmeCr+gMJ8v5znfWFG7bt7xPxm
ACfDxA+bWfwyfObmWWBGiqemTAnPYK9eZLoTFWKp7fjSlnhR+Vwl4nksdAs0P/sm
BOZ2QO8AqRd8z8vV7r+DKYmxLltLHGds8Bq1UOfPcoCqGlEcX8enWUG7lLPS530c
41RRGlWPEiTgat0PBAembxShCHHltY8jPr7C7hcwo42GIWIL97LxApM6K4FXcAQ=
=Pk5d
-----END PGP SIGNATURE-----
Merge remote-tracking branch 'remotes/stsquad/tags/pull-ci-updates-for-softfreeze-180717-2' into staging
Final CI updates for soft-freeze
Tweaks from Paolo for J=x Travis compiles
Bunch of updated cross-compile targets from Philippe
Additional debug tools in travis image from Me
# gpg: Signature made Tue 18 Jul 2017 11:00:26 BST
# gpg: using RSA key 0xFBD0DB095A9E2A44
# gpg: Good signature from "Alex Bennée (Master Work Key) <alex.bennee@linaro.org>"
# Primary key fingerprint: 6685 AE99 E751 67BC AFC8 DF35 FBD0 DB09 5A9E 2A44
* remotes/stsquad/tags/pull-ci-updates-for-softfreeze-180717-2: (32 commits)
docker: install clang since Shippable setup_ve() verify it is available
docker: warn users to use newer debian8/debian9 base image
docker: add debian Ports base image
shippable: add win32/64 targets
docker: add MXE (M cross environment) base image for MinGW-w64
shippable: add mips64el targets
docker: add debian/mips64el image
shippable: use debian/mips[eb] targets
docker: add debian/mips[eb] images
shippable: add powerpc target
docker: add debian/powerpc based on Jessie
docker: add 'apt-fake' script which generate fake debian packages
docker: add qemu:debian-jessie based on outdated jessie release
shippable: add x86_64 targets
shippable: add ppc64el targets
shippable: add armel targets
docker: enable nettle to extend code coverage on arm64
docker: enable gcrypt to extend code coverage on amd64
docker: enable netmap to extend code coverage on amd64
docker: enable virgl to extend code coverage on amd64
...
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
In various places in our test makefiles and scripts we use the
shell $RANDOM to create a random number. This is a bash
specific extension, and doesn't work on other shells.
With dash the shell doesn't complain, it just effectively
always evaluates $RANDOM to 0:
echo $((RANDOM + 32768)) => 32768
However, on NetBSD the shell will complain:
"-sh: arith: syntax error: "RANDOM + 32768"
which means that "make check" fails.
Switch to using "${RANDOM:-0}" instead of $RANDOM,
which will portably either give us a random number or zero.
This means that on non-bash shells we don't get such
good test coverage via the MALLOC_PERTURB_ setting, but
we were already in that situation for non-bash shells.
Our only other uses of $RANDOM (in tests/qemu-iotests/check
and tests/qemu-iotests/162) are in shell scripts which use
a #!/bin/bash line so they are always run under bash.
Suggested-by: Eric Blake <eblake@redhat.com>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Kamil Rytarowski <n54@gmx.com>
Reviewed-by: Fam Zheng <famz@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Message-id: 1500029117-6387-1-git-send-email-peter.maydell@linaro.org
Rather than relying on everywhere that cares about whether the host
supports ivshmem using CONFIG_EVENTFD, make configure set an explicit
CONFIG_IVSHMEM.
Signed-off-by: Kamil Rytarowski <n54@gmx.com>
Reviewed-by: Markus Armbruster <armbru@redhat.com>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Message-id: 1500021225-4118-3-git-send-email-peter.maydell@linaro.org
[PMM: split out from another patch, add commit message]
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
glibc used to have:
typedef struct ucontext { ... } ucontext_t;
glibc now has:
typedef struct ucontext_t { ... } ucontext_t;
(See https://sourceware.org/bugzilla/show_bug.cgi?id=21457
for detail and rationale for the glibc change)
However, QEMU used "struct ucontext" in declarations. This is a
private name and compatibility cannot be guaranteed. Switch to
only using the standardized type name.
Signed-off-by: Khem Raj <raj.khem@gmail.com>
Message-id: 20170628204452.41230-1-raj.khem@gmail.com
Cc: Kamil Rytarowski <kamil@netbsd.org>
Cc: Riku Voipio <riku.voipio@iki.fi>
Cc: Laurent Vivier <laurent@vivier.eu>
Cc: Paolo Bonzini <pbonzini@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
[PMM: Rewrote commit message, based mostly on the one from
Nathaniel McCallum]
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v2.0.22 (GNU/Linux)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=2c6k
-----END PGP SIGNATURE-----
Merge remote-tracking branch 'remotes/kevin/tags/for-upstream' into staging
Block layer patches
# gpg: Signature made Tue 18 Jul 2017 14:29:59 BST
# gpg: using RSA key 0x7F09B272C88F2FD6
# gpg: Good signature from "Kevin Wolf <kwolf@redhat.com>"
# Primary key fingerprint: DC3D EB15 9A9A F95D 3D74 56FE 7F09 B272 C88F 2FD6
* remotes/kevin/tags/for-upstream: (21 commits)
qemu-img: Check for backing image if specified during create
blockdev: move BDRV_O_NO_BACKING option forward
block/vvfat: Fix compiler warning with gcc 7
vvfat: initialize memory after allocating it
vvfat: correctly parse non-ASCII short and long file names
vvfat: add a constant for bootsector name
vvfat: add constants for special values of name[0]
qemu-iotests: Test unplug of -device without drive
qemu-iotests: Test 'info block'
scsi-disk: bdrv_attach_dev() for empty CD-ROM
ide: bdrv_attach_dev() for empty CD-ROM
block: List anonymous device BBs in query-block
block/qapi: Use blk_all_next() for query-block
block: Make blk_all_next() public
block/qapi: Add qdev device name to query-block
block: Make blk_get_attached_dev_id() public
block/vpc.c: Handle write failures in get_image_offset()
block/vmdk: Report failures in vmdk_read_cid()
block: remove timer canceling in throttle_config()
block: add clock_type field to ThrottleGroup
...
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
This patch add a hmac speed benchmark, it helps us to
measure the performance by using "make check-speed" or
using "./tests/benchmark-crypto-hmac" directly.
Signed-off-by: Longpeng(Mike) <longpeng2@huawei.com>
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
This patch add a hash speed benchmark, it helps us to
measure the performance by using "make check-speed" or
using "./tests/benchmark-crypto-hash" directly.
Signed-off-by: Longpeng(Mike) <longpeng2@huawei.com>
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
Now we have two qcrypto backends, libiary-backend and afalg-backend,
but which one is faster? This patch add a cipher speed benchmark, it
helps us to measure the performance by using "make check-speed" or
using "./tests/benchmark-crypto-cipher" directly.
Signed-off-by: Longpeng(Mike) <longpeng2@huawei.com>
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
The migration tests used two VMs each with -m 1024 this caused
problems when run in some small, pessimistic test VMs (netbsd).
We can just be meaner with the amount of RAM in the test and use -m 384
Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Message-id: 20170714152820.24034-1-dgilbert@redhat.com
Reviewed-by: John Snow <jsnow@redhat.com>
Signed-off-by: John Snow <jsnow@redhat.com>
-----BEGIN PGP SIGNATURE-----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=Vt6Z
-----END PGP SIGNATURE-----
Merge remote-tracking branch 'remotes/ehabkost/tags/x86-and-machine-pull-request' into staging
x86 and machine queue, 2017-07-17
# gpg: Signature made Mon 17 Jul 2017 19:46:14 BST
# gpg: using RSA key 0x2807936F984DC5A6
# gpg: Good signature from "Eduardo Habkost <ehabkost@redhat.com>"
# Primary key fingerprint: 5A32 2FD5 ABC4 D3DB ACCF D1AA 2807 936F 984D C5A6
* remotes/ehabkost/tags/x86-and-machine-pull-request:
qmp: Include parent type on 'qom-list-types' output
qmp: Include 'abstract' field on 'qom-list-types' output
tests: Simplify abstract-interfaces check with a helper
i386: add Skylake-Server cpu model
i386: Update comment about XSAVES on Skylake-Client
i386: expose "TCGTCGTCGTCG" in the 0x40000000 CPUID leaf
fw_cfg: move QOM type defines and fw_cfg types into fw_cfg.h
fw_cfg: move qdev_init_nofail() from fw_cfg_init1() to callers
fw_cfg: switch fw_cfg_find() to locate the fw_cfg device by type rather than path
qom: Fix ambiguous path detection when ambiguous=NULL
Revert "machine: Convert abstract typename on compat_props to subclass names"
test-qdev-global-props: Test global property ordering
qdev: fix the order compat and global properties are applied
tests: Test case for object_resolve_path*()
device-crash-test: Fix regexp on whitelist
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Or, rather, force the open of a backing image if one was specified
for creation. Using a similar -unsafe option as rebase, allow qemu-img
to ignore the backing file validation if possible.
It may not always be possible, as in the existing case when a filesize
for the new image was not specified.
This is accomplished by shifting around the conditionals in
bdrv_img_create, such that a backing file is always opened unless we
provide BDRV_O_NO_BACKING. qemu-img is adjusted to pass this new flag
when -u is provided to create.
Sorry for the heinous looking diffstat, but it's mostly whitespace.
Inspired by: https://bugzilla.redhat.com/show_bug.cgi?id=1213786
Signed-off-by: John Snow <jsnow@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
This caused an assertion failure until recently because the BlockBackend
would be detached on unplug, but was in fact never attached in the first
place. Add a regression test.
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Reviewed-by: John Snow <jsnow@redhat.com>
This test makes sure that all block devices show up on 'info block',
with all of the expected information, in different configurations.
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Reviewed-by: John Snow <jsnow@redhat.com>
With -blockdev/-device, users can indirectly create anonymous
BlockBackends, while the state of such backends is still of interest. As
a preparation for making such BBs visible in query-block, make sure that
they can be identified even without a name by adding the ID/QOM path of
their qdev device to BlockInfo.
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Reviewed-by: John Snow <jsnow@redhat.com>
throttle_config() cancels the timers of the calling BlockBackend. This
doesn't make sense because other BlockBackends in the group remain
untouched. There's no need to cancel the timers in the one specific
BlockBackend so let's not do that. Throttled requests will run as
scheduled and future requests will follow the new configuration. This
also allows a throttle group's configuration to be changed even when it
has no members.
Signed-off-by: Manos Pitsidianakis <el13635@mail.ntua.gr>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Clock type in throttling is currently inferred by the ThrottleTimer's
clock type even though it is a per-ThrottleGroup property; it doesn't
make sense to have different clock types in the same group. Moving this
to a field in ThrottleGroup can simplify some of the throttle functions.
Signed-off-by: Manos Pitsidianakis <el13635@mail.ntua.gr>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
* new command: qemu-get-osinfo
* build fix for OpenBSD
* better error-reporting for failure on keyfile dump
* remove redundant initialization of qa_state global
* include libpcre in w32 package
* w32 localization fixes for service installation/registration
v2:
* fix build issue with older GCCs introduced with guest_get_osinfo
* relocated some declarations in guest_get_osinfo
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1
iQEcBAABAgAGBQJZbeh9AAoJEDNTyc7xCLWE3hgH/2n5tn4kqkZ4fNLWiXRQgzmC
Sp6lXMS1iqRwAQTWcI0+C74k6rP9ByytzxYv6UmmdpTUGmk+v26xMaJlV4LysDWx
8ilOd75s4Fmu+pWOaJTXrA8bWKEeoq7RPhl5samtY1u27v2QbCWdqViwhjzbxzNJ
QmomyOkUAKdEpC70XBtEbkSyKqB4aM6nPzlTli8m3/0CNXmtwBmq7g9VPV1alLxp
U567tJu0IQKuu8WsqMTPUQTHQ8ATvl0NLaF5Mpux1/B/FBui1v/9swNXPnbD9YXg
+ZWxjtCep9PWq3WVylU9O2tikttxMW2vXdgB2lYM1agjQZEX+AXOj8WzhF9d4bw=
=UFcD
-----END PGP SIGNATURE-----
Merge remote-tracking branch 'remotes/mdroth/tags/qga-pull-2017-07-17-v2-tag' into staging
qemu-ga patch queue
* new command: qemu-get-osinfo
* build fix for OpenBSD
* better error-reporting for failure on keyfile dump
* remove redundant initialization of qa_state global
* include libpcre in w32 package
* w32 localization fixes for service installation/registration
v2:
* fix build issue with older GCCs introduced with guest_get_osinfo
* relocated some declarations in guest_get_osinfo
# gpg: Signature made Tue 18 Jul 2017 11:52:45 BST
# gpg: using RSA key 0x3353C9CEF108B584
# gpg: Good signature from "Michael Roth <flukshun@gmail.com>"
# gpg: aka "Michael Roth <mdroth@utexas.edu>"
# gpg: aka "Michael Roth <mdroth@linux.vnet.ibm.com>"
# Primary key fingerprint: CEAC C9E1 5534 EBAB B82D 3FA0 3353 C9CE F108 B584
* remotes/mdroth/tags/qga-pull-2017-07-17-v2-tag:
test-qga: add test for guest-get-osinfo
test-qga: pass environemnt to qemu-ga
qemu-ga: add guest-get-osinfo command
qga: report error on keyfile dump error
qga-win32: remove a redundancy code
qemu-ga: check if utmpx.h is available on the system
qemu-ga: add missing libpcre to MSI build
qga-win: fix installation on localized windows
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Add test for guest-get-osinfo command.
Qemu-ga was modified to accept QGA_OS_RELEASE environment variable. If
the variable is defined it is interpreted as path to the os-release file
and it is parsed instead of the default paths.
Signed-off-by: Tomáš Golembiovský <tgolembi@redhat.com>
Reviewed-by: Marc-André Lureau <marcandre.lureau@redhat.com>
* move declarations to beginning of functions
Signed-off-by: Michael Roth <mdroth@linux.vnet.ibm.com>
Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
[AJB: split from merged patch]
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
By itself this doesn't add much to our coverage. However later patches
will extend this image to include more bleeding edge libraries which
are not yet widely available in distros.
Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
[AJB: extend commit msg]
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
We'll also want to support some older Debian combinations for
architectures that didn't make the Debian 9 cut.
Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
[AJB: extend commit msg]
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
When a test fails/hangs you don't want the hassle of getting the debug
tools installed. Lets install them on our image by default so we can
debug when we need to.
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: Fam Zheng <famz@redhat.com>
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Although the upstream Travis images don't need this library our
"travis-lite" scripts are written in python. This allows us to do:
make docker-travis@travis J=10
and approximate a travis run on their default image.
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: Fam Zheng <famz@redhat.com>
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
This is useful so that we can do builds at higher than -j3 when running
travis.py locally.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Commit 8ecaeae8 changed the way the client requests an NBD export,
and in the process also changed the resulting error message when
the export is not present, breaking a couple of iotests. The error
message is now directly given by the server (a failed NBD_OPT_GO)
instead of implied by the client (after exhausting NBD_OPT_LIST),
but looking at the testsuite changes, it proves worthwhile to
reword the error message to be slightly less verbose (as this is
one particular error message likely to be hit by a user).
Note that the error message is now sensitive to which binary is
running the server as well as the client (since the expected
output is replaying a message received from the server - for that
matter, it depends on a server new enough to understand NBD_OPT_GO);
in general iotests are run on client and server from the same source
code base so the default setup will pass; but if it proves
problematic for people overriding QEMU_PROG, QEMU_IMG_PROG,
QEMU_IO_PROG, and QEMU_NBD_PROG to point across multiple builds for
cross-version integration testing, we may have to later tweak or
sanitize the output somehow.
Reported-by: Kevin Wolf <kwolf@redhat.com>
Signed-off-by: Eric Blake <eblake@redhat.com>
Message-Id: <20170717142310.17048-1-eblake@redhat.com>
Tested-by: John Snow <jsnow@redhat.com>
Reviewed-by: John Snow <jsnow@redhat.com>
Include name of parent type of each type on 'qom-list-types' output.
Without this, there's no way to figure out the parents of a given type
without making additional 'qom-list-types' queries.
In addition to the test case for the new feature, update the
abstract-interface test case to use the new field and avoid the
"qom-list-types implements=object" trick.
Reviewed-by: Eric Blake <eblake@redhat.com>
Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
Message-Id: <20170707122215.8819-4-ehabkost@redhat.com>
Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
A client may be interested in getting the list of both abstract and
non-abstract types. Instead of requiring them to make multiple queries
with different filter arguments, just return an 'abstract' field in
'qom-list-types'.
In addition to the new test code for validating this field, update the
abstract-interfaces test case to query for all 'interface' subtypes
(including abstract ones), and to look at the 'abstract' field directly.
Reviewed-by: Eric Blake <eblake@redhat.com>
Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
Message-Id: <20170707122215.8819-3-ehabkost@redhat.com>
Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
Add a new type_list_find() helper to device-introspect-test.c, to
simplify the code at test_abstract_interfaces().
Reviewed-by: Eric Blake <eblake@redhat.com>
Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
Message-Id: <20170707122215.8819-2-ehabkost@redhat.com>
Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
object_resolve_path*() ambiguous path detection breaks when
ambiguous==NULL and the object tree have 3 objects of the same type and
only 2 of them are under the same parent. e.g.:
/container/obj1 (TYPE_FOO)
/container/obj2 (TYPE_FOO)
/obj2 (TYPE_FOO)
With the above tree, object_resolve_path_type("", TYPE_FOO, NULL) will
incorrectly return /obj2, because the search inside "/container" will
return NULL, and the match at "/obj2" won't be detected as ambiguous.
Fix that by always calling object_resolve_partial_path() with a non-NULL
ambiguous parameter.
Test case included.
Reported-by: Igor Mammedov <imammedo@redhat.com>
Cc: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
Message-Id: <20170707213052.13087-3-ehabkost@redhat.com>
Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
Test case to detect the bug fixed by commit
"qdev: fix the order compat and global properties are applied".
Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
Message-Id: <20170711004303.3902-3-ehabkost@redhat.com>
Reviewed-by: Cornelia Huck <cohuck@redhat.com>
Reviewed-by: Greg Kurz <groug@kaod.org>
Reviewed-by: Halil Pasic <pasic@linux.vnet.ibm.com>
Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
Test for partial path lookup using object_resolve_path*().
Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
Message-Id: <20170707213052.13087-2-ehabkost@redhat.com>
Tested-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
Reviewed-by: Igor Mammedov <imammedo@redhat.com>
Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
Every vCPU now uses a separate set of TBs for each set of dynamic
tracing event state values. Each set of TBs can be used by any number of
vCPUs to maximize TB reuse when vCPUs have the same tracing state.
This feature is later used by tracetool to optimize tracing of guest
code events.
The maximum number of TB sets is defined as 2^E, where E is the number
of events that have the 'vcpu' property (their state is stored in
CPUState->trace_dstate).
For this to work, a change on the dynamic tracing state of a vCPU will
force it to flush its virtual TB cache (which is only indexed by
address), and fall back to the physical TB cache (which now contains the
vCPU's dynamic tracing state as part of the hashing function).
Signed-off-by: Lluís Vilanova <vilanova@ac.upc.edu>
Reviewed-by: Richard Henderson <rth@twiddle.net>
Reviewed-by: Emilio G. Cota <cota@braap.org>
Signed-off-by: Emilio G. Cota <cota@braap.org>
Message-id: 149915775266.6295.10060144081246467690.stgit@frigg.lan
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
A few error handlings are missing because we ignore the subprocess exit
code, for example "docker build" errors are currently ignored.
Introduce _do_check() aside the existing _do() method and use it in a
few places.
Signed-off-by: Fam Zheng <famz@redhat.com>
Message-Id: <20170712075528.22770-3-famz@redhat.com>
Tested-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Signed-off-by: Fam Zheng <famz@redhat.com>
The **kwargs can do this just well.
Signed-off-by: Fam Zheng <famz@redhat.com>
Message-Id: <20170712075528.22770-2-famz@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Signed-off-by: Fam Zheng <famz@redhat.com>
When trying to debug problems with tests it is natural to set
DEBUG=1 when starting the docker environment. Unfortunately
this has a side-effect of enabling an eth0 network interface
in the container, which changes the operating environment of
the test suite. IOW tests with fail may suddenly start
working again if DEBUG=1 is set, due to changed network setup.
Add a separate NETWORK variable to allow enablement of
networking separately from DEBUG=1. This can be used in two
ways. To enable the default docker network backend
make docker-test-build@fedora NETWORK=1
while to enable a specific network backend, eg join the network
associated with the container 'wibble':
make docker-test-build@fedora NETWORK=container:wibble
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
Message-Id: <20170713144352.2212-1-berrange@redhat.com>
[Drop the superfluous second $(subst ...). - Fam]
Signed-off-by: Fam Zheng <famz@redhat.com>
There's no requirement for RSDP to be installed last
by the firmware, so in rare cases vmgen id test hits
a race: RSDP is there but VM GEN ID isn't.
To fix, switch to common boot sector infrastructure.
Cc: Laszlo Ersek <lersek@redhat.com>
Cc: Peter Maydell <peter.maydell@linaro.org>
Cc: Ben Warren <ben@skyportsystems.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Reviewed-by: Ben Warren <ben@skyportsystems.com>
Message-id: 1500046217-24597-1-git-send-email-mst@redhat.com
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Anton Nefedov <anton.nefedov@virtuozzo.com>
Reviewed-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
Acked-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Message-Id: <1499342940-56739-11-git-send-email-anton.nefedov@virtuozzo.com>
Reviewed-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
makes it possible to test the existing chardev-file
Signed-off-by: Anton Nefedov <anton.nefedov@virtuozzo.com>
Reviewed-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Message-Id: <1499342940-56739-9-git-send-email-anton.nefedov@virtuozzo.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
makes it possible to test the existing chardev-udp
Signed-off-by: Anton Nefedov <anton.nefedov@virtuozzo.com>
Reviewed-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Message-Id: <1499342940-56739-8-git-send-email-anton.nefedov@virtuozzo.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
this is only not a problem if the test is last in a suite,
otherwise it makes the following main_loop() calls to fail
Signed-off-by: Anton Nefedov <anton.nefedov@virtuozzo.com>
Reviewed-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Message-Id: <1499342940-56739-7-git-send-email-anton.nefedov@virtuozzo.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Frontends should have an interface to setup the handler of a backend change.
The interface will be used in the next commits
Signed-off-by: Anton Nefedov <anton.nefedov@virtuozzo.com>
Reviewed-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
Reviewed-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Message-Id: <1499342940-56739-3-git-send-email-anton.nefedov@virtuozzo.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Convert all uses of error_report("warning:"... to use warn_report()
instead. This helps standardise on a single method of printing warnings
to the user.
All of the warnings were changed using these two commands:
find ./* -type f -exec sed -i \
's|error_report(".*warning[,:] |warn_report("|Ig' {} +
Indentation fixed up manually afterwards.
The test-qdev-global-props test case was manually updated to ensure that
this patch passes make check (as the test cases are case sensitive).
Signed-off-by: Alistair Francis <alistair.francis@xilinx.com>
Suggested-by: Thomas Huth <thuth@redhat.com>
Cc: Jeff Cody <jcody@redhat.com>
Cc: Kevin Wolf <kwolf@redhat.com>
Cc: Max Reitz <mreitz@redhat.com>
Cc: Ronnie Sahlberg <ronniesahlberg@gmail.com>
Cc: Paolo Bonzini <pbonzini@redhat.com>
Cc: Peter Lieven <pl@kamp.de>
Cc: Josh Durgin <jdurgin@redhat.com>
Cc: "Richard W.M. Jones" <rjones@redhat.com>
Cc: Markus Armbruster <armbru@redhat.com>
Cc: Peter Crosthwaite <crosthwaite.peter@gmail.com>
Cc: Richard Henderson <rth@twiddle.net>
Cc: "Aneesh Kumar K.V" <aneesh.kumar@linux.vnet.ibm.com>
Cc: Greg Kurz <groug@kaod.org>
Cc: Rob Herring <robh@kernel.org>
Cc: Peter Maydell <peter.maydell@linaro.org>
Cc: Peter Chubb <peter.chubb@nicta.com.au>
Cc: Eduardo Habkost <ehabkost@redhat.com>
Cc: Marcel Apfelbaum <marcel@redhat.com>
Cc: "Michael S. Tsirkin" <mst@redhat.com>
Cc: Igor Mammedov <imammedo@redhat.com>
Cc: David Gibson <david@gibson.dropbear.id.au>
Cc: Alexander Graf <agraf@suse.de>
Cc: Gerd Hoffmann <kraxel@redhat.com>
Cc: Jason Wang <jasowang@redhat.com>
Cc: Marcelo Tosatti <mtosatti@redhat.com>
Cc: Christian Borntraeger <borntraeger@de.ibm.com>
Cc: Cornelia Huck <cohuck@redhat.com>
Cc: Stefan Hajnoczi <stefanha@redhat.com>
Acked-by: David Gibson <david@gibson.dropbear.id.au>
Acked-by: Greg Kurz <groug@kaod.org>
Acked-by: Cornelia Huck <cohuck@redhat.com>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Reviewed by: Peter Chubb <peter.chubb@data61.csiro.au>
Acked-by: Max Reitz <mreitz@redhat.com>
Acked-by: Marcel Apfelbaum <marcel@redhat.com>
Message-Id: <e1cfa2cd47087c248dd24caca9c33d9af0c499b0.1499866456.git.alistair.francis@xilinx.com>
Reviewed-by: Markus Armbruster <armbru@redhat.com>
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Signed-off-by: Max Reitz <mreitz@redhat.com>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Message-id: 20170613202107.10125-17-mreitz@redhat.com
Signed-off-by: Max Reitz <mreitz@redhat.com>
Signed-off-by: Max Reitz <mreitz@redhat.com>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Message-id: 20170613202107.10125-16-mreitz@redhat.com
Signed-off-by: Max Reitz <mreitz@redhat.com>
This function creates a collection of self-describing refcount
structures (including a new refcount table) at the end of a qcow2 image
file. Optionally, these structures can also describe a number of
additional clusters beyond themselves; this will be important for
preallocated truncation, which will place the data clusters and L2
tables there.
For now, we can use this function to replace the part of
alloc_refcount_block() that grows the refcount table (from which it is
actually derived).
Signed-off-by: Max Reitz <mreitz@redhat.com>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Message-id: 20170613202107.10125-13-mreitz@redhat.com
Signed-off-by: Max Reitz <mreitz@redhat.com>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Reviewed-by: Alberto Garcia <berto@igalia.com>
Message-id: 20170705125738.8777-10-stefanha@redhat.com
Signed-off-by: Max Reitz <mreitz@redhat.com>
Some tests produce format-dependent output. Either the difference is
filtered out and ignored, or the test case is format-specific so we
don't need to worry about per-format output differences.
There is a third case: the test script is the same for all image formats
and the format-dependent output is relevant. An ugly workaround is to
copy-paste the test into multiple per-format test cases. This
duplicates code and is not maintainable.
This patch allows test cases to add per-format golden output files so a
single test case can work correctly when format-dependent output must be
checked:
123.out.qcow2
123.out.raw
123.out.vmdk
...
This naming scheme is not composable with 123.out.nocache or 123.pc.out,
two other scenarios where output files are split. I don't think it
matters since few test cases need these features.
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Reviewed-by: Alberto Garcia <berto@igalia.com>
Message-id: 20170705125738.8777-9-stefanha@redhat.com
Signed-off-by: Max Reitz <mreitz@redhat.com>
POSIX says that backslashes in the arguments to 'echo', as well as
any use of 'echo -n' and 'echo -e', are non-portable; it recommends
people should favor 'printf' instead. This is definitely true where
we do not control which shell is running (such as in makefile snippets
or in documentation examples). But even for scripts where we
require bash (and therefore, where echo does what we want by default),
it is still possible to use 'shopt -s xpg_echo' to change bash's
behavior of echo. And setting a good example never hurts when we are
not sure if a snippet will be copied from a bash-only script to a
general shell script (although I don't change the use of non-portable
\e for ESC when we know the running shell is bash).
Replace 'echo -n "..."' with 'printf %s "..."', and 'echo -e "..."'
with 'printf %b "...\n"', with the optimization that the %s/%b
argument can be omitted if the string being printed is a strict
literal with no '%', '$', or '`' (we could technically also make
this optimization when there are $ or `` substitutions but where
we can prove their results will not be problematic, but proving
that such substitutions are safe makes the patch less trivial
compared to just being consistent).
In the qemu-iotests check script, fix unusual shell quoting
that would result in word-splitting if 'date' outputs a space.
In test 051, take an opportunity to shorten the line.
In test 068, get rid of a pointless second invocation of bash.
CC: qemu-trivial@nongnu.org
Signed-off-by: Eric Blake <eblake@redhat.com>
Message-id: 20170703180950.9895-1-eblake@redhat.com
Signed-off-by: Max Reitz <mreitz@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Signed-off-by: Max Reitz <mreitz@redhat.com>
Message-id: 20170702150510.23276-3-mreitz@redhat.com
Signed-off-by: Max Reitz <mreitz@redhat.com>
A user may specify a relative path for accessing qemu, qemu-img, etc.
through environment variables ($QEMU_PROG and friends) or a symlink.
If a test decides to change its working directory, relative paths will
cease to work, however. Work around this by making all of the paths to
programs that should undergo testing absolute. Besides "realpath", we
also have to use "type -p" to support programs in $PATH.
As a side effect, this fixes specifying these programs as symlinks for
out-of-tree builds: Before, you would have to create two symlinks, one
in the build and one in the source tree (the first one for common.config
to find, the second one for the iotest to use). Now it is sufficient to
create one in the build tree because common.config will resolve it.
Reported-by: Kevin Wolf <kwolf@redhat.com>
Signed-off-by: Max Reitz <mreitz@redhat.com>
Message-id: 20170702150510.23276-2-mreitz@redhat.com
Reviewed-by: Eric Blake <eblake@redhat.com>
Tested-by: Eric Blake <eblake@redhat.com>
Signed-off-by: Max Reitz <mreitz@redhat.com>
On some distros, whenever you close a block device file
descriptor there is a udev rule that resets the file
permissions. This can race with the test script when
we run qemu-io multiple times against the same block
device. Occasionally the second qemu-io invocation
will find udev has reset the permissions causing failure.
Reviewed-by: Max Reitz <mreitz@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
Message-id: 20170626123510.20134-6-berrange@redhat.com
Signed-off-by: Max Reitz <mreitz@redhat.com>
Add tests for sha224, sha512, sha384 and ripemd160 hash
algorithms.
Reviewed-by: Max Reitz <mreitz@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
Message-id: 20170626123510.20134-5-berrange@redhat.com
Signed-off-by: Max Reitz <mreitz@redhat.com>
By default the PBKDF algorithm used with LUKS is tuned
based on the number of iterations to produce 1 second
of running time. This makes running the I/O test with
the LUKS format orders of magnitude slower than with
qcow2/raw formats.
When creating LUKS images, set the iteration time to
a 10ms to reduce the time overhead for LUKS, since
security does not matter in I/O tests.
Previously a full 'check -luks' would take
$ time ./check -luks
Passed all 22 tests
real 23m9.988s
user 21m46.223s
sys 0m22.841s
Now it takes
$ time ./check -luks
Passed all 22 tests
real 4m39.235s
user 3m29.590s
sys 0m24.234s
Still slow compared to qcow2/raw, but much improved
none the less.
Reviewed-by: Max Reitz <mreitz@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
Message-id: 20170626123510.20134-4-berrange@redhat.com
Signed-off-by: Max Reitz <mreitz@redhat.com>
The tests 033, 140, 145 and 157 were all broken
when run with LUKS, since they did not correctly use
the required image opts args syntax to specify the
decryption secret. Further, the 120 test simply does
not make sense to run with luks, as the scenario
exercised is not relevant.
The test 181 was broken when run with LUKS because
it didn't take account of fact that $TEST_IMG was
already in image opts syntax. The launch_qemu
helper also didn't register the secret object
providing the LUKS password.
Reviewed-by: Max Reitz <mreitz@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
Message-id: 20170626123510.20134-3-berrange@redhat.com
Signed-off-by: Max Reitz <mreitz@redhat.com>
While the qemu-img dd command does accept --image-opts
this is not sufficient to make it work with the LUKS
image yet. This is because bdrv_create() still always
requires the non-image-opts syntax.
Thus we must skip 159/170 with luks for now
Reviewed-by: Max Reitz <mreitz@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
Message-id: 20170626123510.20134-2-berrange@redhat.com
Signed-off-by: Max Reitz <mreitz@redhat.com>
Signed-off-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
Reviewed-by: Max Reitz <mreitz@redhat.com>
Message-id: 20170628120530.31251-27-vsementsov@virtuozzo.com
Signed-off-by: Max Reitz <mreitz@redhat.com>
Test that hbitmap iter is resistant to bitmap resetting.
Signed-off-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
Signed-off-by: Denis V. Lunev <den@openvz.org>
Reviewed-by: Max Reitz <mreitz@redhat.com>
Reviewed-by: John Snow <jsnow@redhat.com>
Message-id: 20170628120530.31251-5-vsementsov@virtuozzo.com
Signed-off-by: Max Reitz <mreitz@redhat.com>
Test 181 only works for formats which support live migration (naturally,
as it is a live migration test). Disable it for all formats which do
not.
Signed-off-by: Max Reitz <mreitz@redhat.com>
Message-id: 20170621131157.16584-1-mreitz@redhat.com
Reviewed-by: John Snow <jsnow@redhat.com>
Signed-off-by: Max Reitz <mreitz@redhat.com>
While the crypto layer uses a fixed option name "key-secret",
the upper block layer may have a prefix on the options. e.g.
"encrypt.key-secret", in order to avoid clashes between crypto
option names & other block option names. To ensure the crypto
layer can report accurate error messages, we must tell it what
option name prefix was used.
Reviewed-by: Alberto Garcia <berto@igalia.com>
Reviewed-by: Max Reitz <mreitz@redhat.com>
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
Message-id: 20170623162419.26068-19-berrange@redhat.com
Signed-off-by: Max Reitz <mreitz@redhat.com>
The 138 and 158 iotests exercise the legacy qcow2 aes encryption
code path and they work fine with qcow v1 too.
Reviewed-by: Alberto Garcia <berto@igalia.com>
Reviewed-by: Max Reitz <mreitz@redhat.com>
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
Message-id: 20170623162419.26068-16-berrange@redhat.com
Signed-off-by: Max Reitz <mreitz@redhat.com>
This extends the 087 iotest to cover LUKS encryption when doing
blockdev-add.
Two further tests are added to validate read/write of LUKS
encrypted images with a single file and with a backing file.
Reviewed-by: Alberto Garcia <berto@igalia.com>
Reviewed-by: Max Reitz <mreitz@redhat.com>
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
Message-id: 20170623162419.26068-15-berrange@redhat.com
Signed-off-by: Max Reitz <mreitz@redhat.com>
This adds support for using LUKS as an encryption format
with the qcow2 file, using the new encrypt.format parameter
to request "luks" format. e.g.
# qemu-img create --object secret,data=123456,id=sec0 \
-f qcow2 -o encrypt.format=luks,encrypt.key-secret=sec0 \
test.qcow2 10G
The legacy "encryption=on" parameter still results in
creation of the old qcow2 AES format (and is equivalent
to the new 'encryption-format=aes'). e.g. the following are
equivalent:
# qemu-img create --object secret,data=123456,id=sec0 \
-f qcow2 -o encryption=on,encrypt.key-secret=sec0 \
test.qcow2 10G
# qemu-img create --object secret,data=123456,id=sec0 \
-f qcow2 -o encryption-format=aes,encrypt.key-secret=sec0 \
test.qcow2 10G
With the LUKS format it is necessary to store the LUKS
partition header and key material in the QCow2 file. This
data can be many MB in size, so cannot go into the QCow2
header region directly. Thus the spec defines a FDE
(Full Disk Encryption) header extension that specifies
the offset of a set of clusters to hold the FDE headers,
as well as the length of that region. The LUKS header is
thus stored in these extra allocated clusters before the
main image payload.
Aside from all the cryptographic differences implied by
use of the LUKS format, there is one further key difference
between the use of legacy AES and LUKS encryption in qcow2.
For LUKS, the initialiazation vectors are generated using
the host physical sector as the input, rather than the
guest virtual sector. This guarantees unique initialization
vectors for all sectors when qcow2 internal snapshots are
used, thus giving stronger protection against watermarking
attacks.
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
Message-id: 20170623162419.26068-14-berrange@redhat.com
Reviewed-by: Alberto Garcia <berto@igalia.com>
Signed-off-by: Max Reitz <mreitz@redhat.com>
This converts the qcow2 driver to make use of the QCryptoBlock
APIs for encrypting image content, using the legacy QCow2 AES
scheme.
With this change it is now required to use the QCryptoSecret
object for providing passwords, instead of the current block
password APIs / interactive prompting.
$QEMU \
-object secret,id=sec0,file=/home/berrange/encrypted.pw \
-drive file=/home/berrange/encrypted.qcow2,encrypt.key-secret=sec0
The test 087 could be simplified since there is no longer a
difference in behaviour when using blockdev_add with encrypted
images for the running vs stopped CPU state.
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
Message-id: 20170623162419.26068-12-berrange@redhat.com
Reviewed-by: Alberto Garcia <berto@igalia.com>
Signed-off-by: Max Reitz <mreitz@redhat.com>
Historically the qcow & qcow2 image formats supported a property
"encryption=on" to enable their built-in AES encryption. We'll
soon be supporting LUKS for qcow2, so need a more general purpose
way to enable encryption, with a choice of formats.
This introduces an "encrypt.format" option, which will later be
joined by a number of other "encrypt.XXX" options. The use of
a "encrypt." prefix instead of "encrypt-" is done to facilitate
mapping to a nested QAPI schema at later date.
e.g. the preferred syntax is now
qemu-img create -f qcow2 -o encrypt.format=aes demo.qcow2
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
Message-id: 20170623162419.26068-8-berrange@redhat.com
Reviewed-by: Alberto Garcia <berto@igalia.com>
Signed-off-by: Max Reitz <mreitz@redhat.com>
Test 048 is designed to verify data preservation during an
image resize. The qcow (v1) format impl has never supported
resize so always fails.
Reviewed-by: Max Reitz <mreitz@redhat.com>
Reviewed-by: Alberto Garcia <berto@igalia.com>
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
Message-id: 20170623162419.26068-7-berrange@redhat.com
Signed-off-by: Max Reitz <mreitz@redhat.com>
Test 042 is designed to verify operation with zero sized images.
Such images are not supported with qcow (v1), so this test has
always failed.
Reviewed-by: Max Reitz <mreitz@redhat.com>
Reviewed-by: Alberto Garcia <berto@igalia.com>
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
Message-id: 20170623162419.26068-6-berrange@redhat.com
Signed-off-by: Max Reitz <mreitz@redhat.com>
Without a passthrough status of BDRV_BLOCK_RAW, anything wrapped by
blkdebug appears 100% allocated as data. Better is treating it the
same as the underlying file being wrapped.
Update iotest 177 for the new expected output.
Signed-off-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Fam Zheng <famz@redhat.com>
Reviewed-by: Max Reitz <mreitz@redhat.com>
Reviewed-by: John Snow <jsnow@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
We document that *file is valid if the return is not an error and
includes BDRV_BLOCK_OFFSET_VALID, but forgot to obey this contract
when a driver (such as blkdebug) lacks a callback. Messed up in
commit 67a0fd2 (v2.6), when we added the file parameter.
Enhance qemu-iotest 177 to cover this, using a sequence that would
print garbage or even SEGV, because it was dererefencing through
uninitialized memory. [The resulting test output shows that we
have less-than-ideal block status from the blkdebug driver, but
that's a separate fix coming up soon.]
Setting *file on all paths that return BDRV_BLOCK_OFFSET_VALID is
enough to fix the crash, but we can go one step further: always
setting *file, even on error, means that a broken caller that
blindly dereferences file without checking for error is now more
likely to get a reliable SEGV instead of randomly acting on garbage,
making it easier to diagnose such buggy callers. Adding an
assertion that file is set where expected doesn't hurt either.
CC: qemu-stable@nongnu.org
Signed-off-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Fam Zheng <famz@redhat.com>
Reviewed-by: Max Reitz <mreitz@redhat.com>
Reviewed-by: John Snow <jsnow@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Most callback commands in qemu-io return 0 to keep the interpreter
loop running, or 1 to quit immediately. However, open_f() just
passed through the return value of openfile(), which has different
semantics of returning 0 if a file was opened, or 1 on any failure.
As a result of mixing the return semantics, we are forcing the
qemu-io interpreter to exit early on any failures, which is rather
annoying when some of the failures are obviously trying to give
the user a hint of how to proceed (if we didn't then kill qemu-io
out from under the user's feet):
$ qemu-io
qemu-io> open foo
qemu-io> open foo
file open already, try 'help close'
$ echo $?
0
In general, we WANT openfile() to report failures, since it is the
function used in the form 'qemu-io -c "$something" no_such_file'
for performing one or more -c options on a single file, and it is
not worth attempting $something if the file itself cannot be opened.
So the solution is to fix open_f() to always return 0 (when we are
in interactive mode, even failure to open should not end the
session), and save the return value of openfile() for command line
use in main().
Note, however, that we do have some qemu-iotests that do 'qemu-io
-c "open file" -c "$something"'; such tests will now proceed to
attempt $something whether or not the open succeeded, the same way
as if the two commands had been attempted in interactive mode. As
such, the expected output for those tests has to be modified. But it
also means that it is now possible to use -c close and have a single
qemu-io command line operate on more than one file even without
using interactive mode. Although the '-c open' action is a subtle
change in behavior, remember that qemu-io is for debugging purposes,
so as long as it serves the needs of qemu-iotests while still being
reasonable for interactive use, it should not be a problem that we
are changing tests to the new behavior.
This has been awkward since at least as far back as commit
e3aff4f, in 2009.
Signed-off-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Fam Zheng <famz@redhat.com>
Reviewed-by: John Snow <jsnow@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
In QEMU's main_loop() we used to check whether we should do
a nonblocking call to main_loop(); this was deleted in commit e330c118f2,
because now that vCPUs always drop the I/O thread lock it is an unnecessary
optimization.
The loop in test-char.c copied the old QEMU main_loop() code, but
here the nonblocking check has never been necessary because this
standalone test case doesn't hold the I/O lock anyway. Remove it,
so we can drop the main_loop_wait() return value.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Message-Id: <1498584769-12439-2-git-send-email-peter.maydell@linaro.org>
Reviewed-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
We dropped some dead code, update extected table binaries.
Fixes: 4d7e7f2702 ("hw/acpi: remove dead acpi code")
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
The following tests are implemented:
* test that a GUID passed in by command line is propagated to the guest.
Read the GUID from guest memory
* test that the "auto" argument to the GUID generates a valid GUID, as
seen by the guest.
* test that a GUID passed in can be queried from the monitor
This patch is loosely based on a previous patch from:
Gal Hammer <ghammer@redhat.com> and Igor Mammedov <imammedo@redhat.com>
Signed-off-by: Ben Warren <ben@skyportsystems.com>
Reviewed-by: Igor Mammedov <imammedo@redhat.com>
Reviewed-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Version: GnuPG v2
iQEtBAABCAAXBQJZVlttEBxmYW16QHJlZGhhdC5jb20ACgkQyjViTGqRccaSJQf/
aKBxpeES6l4zYoa09+x7eJwjQXj6RdIpUNL5N4a/dhUsVJ2keWo6lPcjC/kcbwPR
TJ4zYplm+suVzbNZG4XJGXLryo6ODIaHhpa/Ctsf3i6vQkRipxManpTbqqnyjt/e
fAnwdFu0dFKbnqJECujDQgaZo1qWLuyZP++ZFt2kiZgOX/OdHpnQPH2U4l+22Cp6
LB2FAFv0TwDjxmzM6EuOjsuLr9Rq3ckx7CVoyCnZuWkcaqn3/2cXhdNDErUB1nl7
Pa/N3khz6PJs1Q8/H3GPH+BJHfORLRFR6dZ/eD8JU6qqBJfguvkSmi9cQUlbVsko
KEBqUmL+bKJaK257lkUkfg==
=wO2z
-----END PGP SIGNATURE-----
Merge remote-tracking branch 'remotes/famz/tags/block-pull-request' into staging
# gpg: Signature made Fri 30 Jun 2017 15:08:45 BST
# gpg: using RSA key 0xCA35624C6A9171C6
# gpg: Good signature from "Fam Zheng <famz@redhat.com>"
# gpg: WARNING: This key is not certified with a trusted signature!
# gpg: There is no indication that the signature belongs to the owner.
# Primary key fingerprint: 5003 7CB7 9706 0F76 F021 AD56 CA35 624C 6A91 71C6
* remotes/famz/tags/block-pull-request:
block: Exploit BDRV_BLOCK_EOF for larger zero blocks
block: Add BDRV_BLOCK_EOF to bdrv_get_block_status()
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
When we have a BDS with unallocated clusters, but asking the status
of its underlying bs->file or backing layer encounters an end-of-file
condition, we know that the rest of the unallocated area will read as
zeroes. However, pre-patch, this required two separate calls to
bdrv_get_block_status(), as the first call stops at the point where
the underlying file ends. Thanks to BDRV_BLOCK_EOF, we can now widen
the results of the primary status if the secondary status already
includes BDRV_BLOCK_ZERO.
In turn, this fixes a TODO mentioned in iotest 154, where we can now
see that all sectors in a partial cluster at the end of a file read
as zero when coupling the shorter backing file's status along with our
knowledge that the remaining sectors came from an unallocated cluster.
Also, note that the loop in bdrv_co_get_block_status_above() had an
inefficent exit: in cases where the active layer sets BDRV_BLOCK_ZERO
but does NOT set BDRV_BLOCK_ALLOCATED (namely, where we know we read
zeroes merely because our unallocated clusters lie beyond the backing
file's shorter length), we still ended up probing the backing layer
even though we already had a good answer.
Signed-off-by: Eric Blake <eblake@redhat.com>
Message-Id: <20170505021500.19315-3-eblake@redhat.com>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Signed-off-by: Fam Zheng <famz@redhat.com>
Use the new used ring APIs instead of assuming ISR being set means the
request has completed.
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Reviewed-by: Fam Zheng <famz@redhat.com>
Tested-by: Eric Blake <eblake@redhat.com>
Tested-by: Kevin Wolf <kwolf@redhat.com>
Message-id: 20170628184724.21378-6-stefanha@redhat.com
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Use the new used ring APIs instead of assuming ISR being set means the
request has completed.
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Reviewed-by: Fam Zheng <famz@redhat.com>
Tested-by: Eric Blake <eblake@redhat.com>
Tested-by: Kevin Wolf <kwolf@redhat.com>
Message-id: 20170628184724.21378-5-stefanha@redhat.com
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Use the new used ring APIs instead of assuming ISR being set means the
request has completed.
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Reviewed-by: Fam Zheng <famz@redhat.com>
Tested-by: Eric Blake <eblake@redhat.com>
Tested-by: Kevin Wolf <kwolf@redhat.com>
Message-id: 20170628184724.21378-4-stefanha@redhat.com
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Existing tests do not touch the virtqueue used ring. Instead they poll
the virtqueue ISR register and peek into their request's device-specific
status field.
It turns out that the virtqueue ISR register can be set to 1 more than
once for a single notification (see commit
83d768b564 "virtio: set ISR on dataplane
notifications"). This causes problems for tests that assume a 1:1
correspondence between the ISR being 1 and request completion.
Peeking at device-specific status fields is also problematic if the
device has no field that can be abused for EINPROGRESS polling
semantics. This is the case if all the field's values may be set by the
device; there's no magic constant left for polling.
It's time to process the used ring for completed requests, just like a
real virtio guest driver. This patch adds the necessary APIs.
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Reviewed-by: Fam Zheng <famz@redhat.com>
Tested-by: Eric Blake <eblake@redhat.com>
Tested-by: Kevin Wolf <kwolf@redhat.com>
Message-id: 20170628184724.21378-3-stefanha@redhat.com
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Reviewed-by: Fam Zheng <famz@redhat.com>
Tested-by: Eric Blake <eblake@redhat.com>
Tested-by: Kevin Wolf <kwolf@redhat.com>
Message-id: 20170628184724.21378-2-stefanha@redhat.com
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Sending a break on a serial console can be useful for debugging the
guest. But not all chardev backends support sending breaks (only telnet
and mux do). The chardev-send-break command allows to send a break even
if using other backends.
Signed-off-by: Stefan Fritsch <sf@sfritsch.de>
Acked-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Message-Id: <20170611074817.13621-1-sf@sfritsch.de>
Reviewed-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Use 'send a break' in all 3 pieces of text as suggested by eblake
Perform the savevm/loadvm test with both iothread on and off. This
covers the recently found savevm/loadvm hang when iothread is enabled.
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
The legacy -hda option does not support -drive/-device parameters. They
will be required by the next patch that extends this test case.
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
When qemu is exited, all running jobs should be cancelled successfully.
This adds a test for this for all types of block jobs that currently
exist in qemu.
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
After _cleanup_qemu(), test cases should be able to start the next qemu
process and call _cleanup_qemu() for that one as well. For this to work
cleanly, we need to improve the cleanup so that the second invocation
doesn't try to kill the qemu instances from the first invocation a
second time (which would result in error messages).
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Max Reitz <mreitz@redhat.com>
We add the following cross-compile targets:
- mipsel-softmmu,mipsel-linux-user,mips64el-linux-user
- armeb-linux-user
While I was rolling I discovered we could also back out a bunch of the
emdebian hacks as the newly released stretch handles cross compilers
as first class citizens. Unfortunately this also meant I had to drop
the powerpc support as that is no longer in Debian stable.
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1
iQEcBAABAgAGBQJZSn4uAAoJEPvQ2wlanipE8+wH/jdr1A3AUrxvQh5PNivAxKr7
FnDBNl41egWqmGSjE+pjJ5lZIVozg5cs8/WZnrOKcjnBk+eCitWI8cbE1nvJRMRL
71MVdy4bYgNCX1iVSbl/OmZqMdunmIrQXb9YxdIkbOOjAIFAacd16xorRcgtOPS/
/3H1zkBOnn16tHjGpQENBZQK3h0Rh5pKGQg8cG5d81i/38DTIlDO2vdgs0Hb7yHK
WZwrlQctkb6MvPTp0vvNj17Z0KYeLqXBKxvKVNEmLoqSt4e1Tocz9kukWyPInocY
u575XM3haUSuPqUD8EO1db4G52iWsOIz4M4S/1Rzr6/W4QWGXScvUauEJDZGvNA=
=g+BN
-----END PGP SIGNATURE-----
Merge remote-tracking branch 'remotes/stsquad/tags/pull-ci-updates-210617-2' into staging
This is mostly Philippe's updates
We add the following cross-compile targets:
- mipsel-softmmu,mipsel-linux-user,mips64el-linux-user
- armeb-linux-user
While I was rolling I discovered we could also back out a bunch of the
emdebian hacks as the newly released stretch handles cross compilers
as first class citizens. Unfortunately this also meant I had to drop
the powerpc support as that is no longer in Debian stable.
# gpg: Signature made Wed 21 Jun 2017 15:09:50 BST
# gpg: using RSA key 0xFBD0DB095A9E2A44
# gpg: Good signature from "Alex Bennée (Master Work Key) <alex.bennee@linaro.org>"
# Primary key fingerprint: 6685 AE99 E751 67BC AFC8 DF35 FBD0 DB09 5A9E 2A44
* remotes/stsquad/tags/pull-ci-updates-210617-2: (21 commits)
MAINTAINERS: self-appoint me as reviewer in build/test automation
MAINTAINERS: add Shippable automation platform URL
shippable: add mipsel target
shippable: add armeb-linux-user target
shippable: be verbose while building docker images
shippable: do not initialize submodules automatically
shippable: build using all available cpus
shippable: use C locale to simplify console output
docker: add mipsel build target
docker: add extra libs to s390x target to extend codebase coverage
docker: add extra libs to arm64 target to extend codebase coverage
docker: add extra libs to armhf target to extend codebase coverage
docker: use eatmydata in debian arm64 image
docker: use eatmydata in debian armhf image
docker: use eatmydata, install common build packages in base image
docker: use better regex to generate deb-src entries
docker: install ca-certificates package in base image
docker: rebuild image if 'extra files' checksum does not match
docker: add --include-files argument to 'build' command
docker: let _copy_with_mkdir() sub_path argument be optional
...
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
-----BEGIN PGP SIGNATURE-----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=O9Vv
-----END PGP SIGNATURE-----
Merge remote-tracking branch 'remotes/armbru/tags/pull-qapi-2017-06-09-v2' into staging
QAPI patches for 2017-06-09
# gpg: Signature made Tue 20 Jun 2017 13:31:39 BST
# gpg: using RSA key 0x3870B400EB918653
# gpg: Good signature from "Markus Armbruster <armbru@redhat.com>"
# gpg: aka "Markus Armbruster <armbru@pond.sub.org>"
# Primary key fingerprint: 354B C8B3 D7EB 2A6B 6867 4E5F 3870 B400 EB91 8653
* remotes/armbru/tags/pull-qapi-2017-06-09-v2: (41 commits)
tests/qdict: check more get_try_int() cases
console: use get_uint() for "head" property
i386/cpu: use get_uint() for "min-level"/"min-xlevel" properties
numa: use get_uint() for "size" property
pnv-core: use get_uint() for "core-pir" property
pvpanic: use get_uint() for "ioport" property
auxbus: use get_uint() for "addr" property
arm: use get_uint() for "mp-affinity" property
xen: use get_uint() for "max-ram-below-4g" property
pc: use get_uint() for "hpet-intcap" property
pc: use get_uint() for "apic-id" property
pc: use get_uint() for "iobase" property
acpi: use get_uint() for "pci-hole*" properties
acpi: use get_uint() for various acpi properties
acpi: use get_uint() for "acpi-pcihp-io*" properties
platform-bus: use get_uint() for "addr" property
bcm2835_fb: use {get, set}_uint() for "vcram-size" and "vcram-base"
aspeed: use {set, get}_uint() for "ram-size" property
pcihp: use get_uint() for "bsel" property
pc-dimm: make "size" property uint64
...
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
The common build packages are: build-essential clang git bison flex
Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
[AJB: fixups following stretch update]
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
[AJB: fixed up following dropping emdebian]
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Debian has now released Stretch as its new stable. As we track
debian:stable-slim this has a few consequences. For one thing we can
now drop the emdebian hacks as cross compilers are part of the
official repositories now. However we do loose the ability to build
against powerpc (not ppc64) since that is no longer a release
architecture.
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Version: GnuPG v2
iQEtBAABCAAXBQJZQyPmEBxmYW16QHJlZGhhdC5jb20ACgkQyjViTGqRccaWrgf/
SCAHpi4gzWbr7AN03jP16Qy/kqNik6F7LTNSqrRbvBPb3TNchDd4z44SAghK5m/r
+IlYQc20sBZ60tRHIHAUSF2WNcea2pj1v3ZVgjrI7hiJ3DXPiqqt/dAR/W/BLIDO
tAHAVF6Pnrjm9DC4d2zATLDHvcHMzWOsnePh7XcOm44REbwUr3GDg6bf2+j+5yfS
9ewmXfh8z4w1IvSn+f5B+IeCvGvJNA1D55dqcGo8Ivlg9PnElziXFaXO2s7UiLIM
mF3eTSIbJQNNN+E+0lpRpnqQiq+Txxggu61Q4f8bOTBhEOPa3etj1ydnXMVbvX25
6SUuBfGh51tyOIZOJz3GtA==
=9b+J
-----END PGP SIGNATURE-----
Merge remote-tracking branch 'remotes/famz/tags/docker-and-block-pull-request' into staging
# gpg: Signature made Fri 16 Jun 2017 01:18:46 BST
# gpg: using RSA key 0xCA35624C6A9171C6
# gpg: Good signature from "Fam Zheng <famz@redhat.com>"
# gpg: WARNING: This key is not certified with sufficiently trusted signatures!
# gpg: It is not certain that the signature belongs to the owner.
# Primary key fingerprint: 5003 7CB7 9706 0F76 F021 AD56 CA35 624C 6A91 71C6
* remotes/famz/tags/docker-and-block-pull-request: (23 commits)
block: make accounting thread-safe
block: split BlockAcctStats creation and setup
block: introduce block_account_one_io
block: protect modification of dirty bitmaps with a mutex
migration/block: reset dirty bitmap before reading
block: introduce dirty_bitmap_mutex
block: protect tracked_requests and flush_queue with reqs_lock
block: access write_gen with atomics
block: use Stat64 for wr_highest_offset
util: add stats64 module
throttle-groups: protect throttled requests with a CoMutex
throttle-groups: do not use qemu_co_enter_next
throttle-groups: only start one coroutine from drained_begin
block: access io_plugged with atomic ops
block: access wakeup with atomic ops
block: access serialising_in_flight with atomic ops
block: access io_limits_disabled with atomic ops
block: access quiesce_counter with atomic ops
block: access copy_on_read with atomic ops
docker: Add flex and bison to centos6 image
...
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Switch to use QNum/uint where appropriate to remove i64 limitation.
The input visitor will cast i64 input to u64 for compatibility
reasons (existing json QMP client already use negative i64 for large
u64, and expect an implicit cast in qemu).
Note: before the patch, uint64_t values above INT64_MAX are sent over
json QMP as negative values, e.g. UINT64_MAX is sent as -1. After the
patch, they are sent unmodified. Clearly a bug fix, but we have to
consider compatibility issues anyway. libvirt should cope fine,
because its parsing of unsigned integers accepts negative values
modulo 2^64. There's hope that other clients will, too.
Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Reviewed-by: Markus Armbruster <armbru@redhat.com>
Message-Id: <20170607163635.17635-12-marcandre.lureau@redhat.com>
[check_native_list() tweaked for consistency with signed case]
Signed-off-by: Markus Armbruster <armbru@redhat.com>
