These cases require a bit more thought to review; in each case, the
code was appending to a list, but not with a FOOList **tail variable.
Signed-off-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
Message-Id: <20210113221013.390592-6-eblake@redhat.com>
Reviewed-by: Markus Armbruster <armbru@redhat.com>
[Flawed change to qmp_guest_network_get_interfaces() dropped]
Signed-off-by: Markus Armbruster <armbru@redhat.com>
On first glance, the loop in qmp_query_rx_filter() has early return
paths that could leak any allocation of filter_list from a previous
iteration. But on closer inspection, it is obvious that all of the
early exits are guarded by has_name, and that the bulk of the loop
body can be executed at most once if the user is filtering by name,
thus, any early exit coincides with an empty list. Add asserts to
make this obvious.
Signed-off-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Markus Armbruster <armbru@redhat.com>
Message-Id: <20210113221013.390592-2-eblake@redhat.com>
Reviewed-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
Signed-off-by: Markus Armbruster <armbru@redhat.com>
At present net_checksum_calculate() blindly calculates all types of
checksums (IP, TCP, UDP). Some NICs may have a per type setting in
their BDs to control what checksum should be offloaded. To support
such hardware behavior, introduce a 'csum_flag' parameter to the
net_checksum_calculate() API to allow fine control over what type
checksum is calculated.
Existing users of this API are updated accordingly.
Signed-off-by: Bin Meng <bin.meng@windriver.com>
Signed-off-by: Jason Wang <jasowang@redhat.com>
At present net_checksum_calculate() only calculates TCP/UDP checksum
in an IP packet, but assumes the IP header checksum to be provided
by the software, e.g.: Linux kernel always calculates the IP header
checksum. However this might not always be the case, e.g.: for an IP
checksum offload enabled stack like VxWorks, the IP header checksum
can be zero.
This adds the checksum calculation of the IP header.
Signed-off-by: Guishan Qin <guishan.qin@windriver.com>
Signed-off-by: Yabing Liu <yabing.liu@windriver.com>
Signed-off-by: Bin Meng <bin.meng@windriver.com>
Reviewed-by: Cédric Le Goater <clg@kaod.org>
Signed-off-by: Jason Wang <jasowang@redhat.com>
To calculate the TCP/UDP checksum we need the whole datagram. Unless
the hardware has some logic to collect all fragments before sending
the whole datagram first, it can only be done by the network stack,
which is normally the case for the NICs we have seen so far.
Skip these fragmented IP packets to avoid checksum corruption.
Signed-off-by: Markus Carlstedt <markus.carlstedt@windriver.com>
Signed-off-by: Bin Meng <bin.meng@windriver.com>
Signed-off-by: Jason Wang <jasowang@redhat.com>
CLI -netdev accumulates in option group "netdev".
Before commit 08712fcb85 "net: Track netdevs in NetClientState rather
than QemuOpt", netdev_add added to the option group, and netdev_del
removed from it, both HMP and QMP. Thus, every netdev had a
corresponding QemuOpts in this option group.
Commit 08712fcb85 dropped this for QMP netdev_add and both netdev_del.
Now a netdev has a corresponding QemuOpts only when it was created
with CLI or HMP. Two issues:
* QMP and HMP netdev_del can leave QemuOpts behind, breaking HMP
netdev_add. Reproducer:
$ qemu-system-x86_64 -S -display none -nodefaults -monitor stdio
QEMU 5.1.92 monitor - type 'help' for more information
(qemu) netdev_add user,id=net0
(qemu) info network
net0: index=0,type=user,net=10.0.2.0,restrict=off
(qemu) netdev_del net0
(qemu) info network
(qemu) netdev_add user,id=net0
upstream-qemu: Duplicate ID 'net0' for netdev
Try "help netdev_add" for more information
Fix by restoring the QemuOpts deletion in qmp_netdev_del(), but with
a guard, because the QemuOpts need not exist.
* QMP netdev_add loses its "no duplicate ID" check. Reproducer:
$ qemu-system-x86_64 -S -display none -qmp stdio
{"QMP": {"version": {"qemu": {"micro": 92, "minor": 1, "major": 5}, "package": "v5.2.0-rc2-1-g02c1f0142c"}, "capabilities": ["oob"]}}
{"execute": "qmp_capabilities"}
{"return": {}}
{"execute": "netdev_add", "arguments": {"type": "user", "id":"net0"}}
{"return": {}}
{"execute": "netdev_add", "arguments": {"type": "user", "id":"net0"}}
{"return": {}}
Fix by adding a duplicate ID check to net_client_init1() to replace
the lost one. The check is redundant for callers where QemuOpts
still checks, i.e. for CLI and HMP.
Reported-by: Andrew Melnichenko <andrew@daynix.com>
Fixes: 08712fcb85
Cc: qemu-stable@nongnu.org
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Signed-off-by: Jason Wang <jasowang@redhat.com>
This commit is the result of running the timer-del-timer-free.cocci
script on the whole source tree.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Acked-by: Corey Minyard <cminyard@mvista.com>
Acked-by: Paolo Bonzini <pbonzini@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20201215154107.3255-4-peter.maydell@linaro.org
Instance properties make introspection hard and are not shown by
"-object ...,help". Convert them to class properties.
Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
Message-Id: <20201111183823.283752-12-ehabkost@redhat.com>
Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
Trivial code reordering in some filter backends, to make the next
changes easier to review.
Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
Message-Id: <20201111183823.283752-11-ehabkost@redhat.com>
Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
Instance properties make introspection hard and are not shown by
"-object ...,help". Convert them to class properties.
Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
Tested-by: Pavel Pisa <pisa@cmp.felk.cvut.cz>
Message-Id: <20201111183823.283752-9-ehabkost@redhat.com>
Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
Providing the 'if' property, but not 'canbus' segfaults like this:
#0 0x0000555555b0f14d in can_bus_insert_client (bus=0x0, client=0x555556aa9af0) at ../net/can/can_core.c:88
#1 0x00005555559c3803 in can_host_connect (ch=0x555556aa9ac0, errp=0x7fffffffd568) at ../net/can/can_host.c:62
#2 0x00005555559c386a in can_host_complete (uc=0x555556aa9ac0, errp=0x7fffffffd568) at ../net/can/can_host.c:72
#3 0x0000555555d52de9 in user_creatable_complete (uc=0x555556aa9ac0, errp=0x7fffffffd5c8) at ../qom/object_interfaces.c:23
Add the missing NULL check.
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Message-Id: <20201130105615.21799-5-kwolf@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Fixes: 63c4db4c2e (net: relocate paths to helpers and scripts)
Signed-off-by: Keqian Zhu <zhukeqian1@huawei.com>
Signed-off-by: Jason Wang <jasowang@redhat.com>
Close fd before returning.
Buglink: https://bugs.launchpad.net/qemu/+bug/1904486
Signed-off-by: yuanjungong <ruc_gongyuanjun@163.com>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Jason Wang <jasowang@redhat.com>
https://bugzilla.redhat.com/show_bug.cgi?id=1829272
When deleting queue pair, purge pending RX packets if any.
Example of problematic flow:
1. Bring up q35 VM with tap (vhost off) and virtio-net or e1000e
2. Run ping flood to the VM NIC ( 1 ms interval)
3. Hot unplug the NIC device (device_del)
During unplug process one or more packets come, the NIC
can't receive, tap disables read_poll
4. Hot plug the device (device_add) with the same netdev
The tap stays with read_poll disabled and does not receive
any packets anymore (tap_send never triggered)
Signed-off-by: Yuri Benditovich <yuri.benditovich@daynix.com>
Signed-off-by: Jason Wang <jasowang@redhat.com>
"netdev_add help" is causing QEMU to exit because the code that
invokes show_netdevs is shared between CLI and HMP processing.
Move the check to the callers so that exit(0) remains only
in the CLI flow.
"netdev_add help" is not fixed by this patch; that is left for
later work.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Jason Wang <jasowang@redhat.com>
The result has been checked to be NULL before, it cannot be NULL here,
so the check is redundant. Remove it.
Reported-by: Euler Robot <euler.robot@huawei.com>
Signed-off-by: AlexChen <alex.chen@huawei.com>
Signed-off-by: Jason Wang <jasowang@redhat.com>
eth_get_gso_type() routine returns segmentation offload type based on
L3 protocol type. It calls g_assert_not_reached if L3 protocol is
unknown, making the following return statement unreachable. Remove the
g_assert call, it maybe triggered by a guest user.
Reported-by: Gaoning Pan <pgn@zju.edu.cn>
Signed-off-by: Prasad J Pandit <pjp@fedoraproject.org>
Signed-off-by: Jason Wang <jasowang@redhat.com>
Detect queued secondary packet to sync VM state in time.
Signed-off-by: Zhang Chen <chen.zhang@intel.com>
Reviewed-by: Li Zhijian <lizhijian@cn.fujitsu.com>
Signed-off-by: Jason Wang <jasowang@redhat.com>
The virtual clock only runs during the emulation. It stops
when the virtual machine is stopped.
The host clock should be used for device models that emulate accurate
real time sources. It will continue to run when the virtual machine
is suspended. COLO need to know the host time here.
Fixes: dd321ecfc2 ("colo-compare: Use IOThread to Check old packet
regularly and Process packets of the primary")
Reported-by: Derek Su <dereksu@qnap.com>
Signed-off-by: Zhang Chen <chen.zhang@intel.com>
Reviewed-by: Li Zhijian <lizhijian@cn.fujitsu.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Signed-off-by: Jason Wang <jasowang@redhat.com>
This parameter need compare with the return of qemu_clock_get_ms(),
it is uint64_t. So we need fix this issue here.
Fixes: 9cc43c94b3 ("net/colo-compare.c: Expose "compare_timeout" to users")
Reported-by: Derek Su <dereksu@qnap.com>
Signed-off-by: Zhang Chen <chen.zhang@intel.com>
Reviewed-by: Li Zhijian <lizhijian@cn.fujitsu.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Signed-off-by: Jason Wang <jasowang@redhat.com>
Fixes: f449c9e549 ("colo: compare the packet based on the tcp sequence
number")
Signed-off-by: Li Zhijian <lizhijian@cn.fujitsu.com>
Signed-off-by: Zhang Chen <chen.zhang@intel.com>
Reviewed-by: Zhang Chen <chen.zhang@intel.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Signed-off-by: Jason Wang <jasowang@redhat.com>
The seq of tcp has been filled in fill_pkt_tcp_info, it
can be used directly here.
Signed-off-by: Lei Rao <lei.rao@intel.com>
Signed-off-by: Zhang Chen <chen.zhang@intel.com>
Reviewed-by: Li Zhijian <lizhijian@cn.fujitsu.com>
Reviewed-by: Zhang Chen <chen.zhang@intel.com>
Signed-off-by: Jason Wang <jasowang@redhat.com>
s->connection_track_table forgot to destroy in colo_rewriter_cleanup. Fix it.
Reported-by: Euler Robot <euler.robot@huawei.com>
Signed-off-by: Pan Nengyuan <pannengyuan@huawei.com>
Signed-off-by: Zhang Chen <chen.zhang@intel.com>
Reviewed-by: Zhang Chen <chen.zhang@intel.com>
Reviewed-by: Li Qiang <liq3ea@gmail.com>
Signed-off-by: Jason Wang <jasowang@redhat.com>
Fix the bug that while Check qemu supported netdev,
there is no vhost-vdpa
Signed-off-by: Cindy Lu <lulu@redhat.com>
Message-Id: <20201016030909.9522-2-lulu@redhat.com>
Acked-by: Jason Wang <jasowang@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
fix the bug that fd will still open after the cleanup
Signed-off-by: Cindy Lu <lulu@redhat.com>
Message-Id: <20201016030909.9522-1-lulu@redhat.com>
Acked-by: Jason Wang <jasowang@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Vendor driver may not support or implement config
interrupt delivery for link status notifications.
In this event, vendor driver is expected to NACK
the feature, but guest will keep link always up.
Signed-off-by: Si-Wei Liu <si-wei.liu@oracle.com>
Message-Id: <1601582985-14944-1-git-send-email-si-wei.liu@oracle.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
this fixes non-TCG builds broken recently by replay reverse debugging.
Stub the needed functions in stub/, splitting roughly between functions
needed only by system emulation, by system emulation and tools,
and by everyone. This includes duplicating some code in replay/, and
puts the logic for non-replay related events in the replay/ module (+
the stubs), so this should be revisited in the future.
Surprisingly, only _one_ qtest was affected by this, ide-test.c, which
resulted in a buzz as the bh events were never delivered, and the bh
never executed.
Many other subsystems _should_ have been affected.
This fixes the immediate issue, however a better way to group replay
functionality to TCG-only code could be developed in the long term.
Signed-off-by: Claudio Fontana <cfontana@suse.de>
Message-Id: <20201013192123.22632-4-cfontana@suse.de>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
cur_mon really needs to be coroutine-local as soon as we move monitor
command handlers to coroutines and let them yield. As a first step, just
remove all direct accesses to cur_mon so that we can implement this in
the getter function later.
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Message-Id: <20201005155855.256490-4-kwolf@redhat.com>
Reviewed-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Signed-off-by: Markus Armbruster <armbru@redhat.com>
SLIRP uses Meson so it could become a subproject in the future,
but our choice of configure options is not yet supported in Meson
(https://github.com/mesonbuild/meson/pull/7740).
For now, build the library via the main meson.build just like for
capstone.
This improves the current state of affairs in that we will re-link
the qemu executables against a changed libslirp.a, which we wouldn't
do before-hand.
Tested-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Fore-commit(c6beefd674) only saves features of queue0,
this makes wrong features of other queues in multiqueues
situation.
For examples:
qemu-system-aarch64 ... \
-chardev socket,id=charnet0,path=/var/run/vhost_sock \
-netdev vhost-user,chardev=charnet0,queues=2,id=hostnet0 \
...
There are two queues in nic assocated with one chardev.
When chardev is reconnected, it is necessary to save and
restore features of all queues.
Signed-of-by: Haibin Zhang <haibinzhang@tencent.com>
Message-Id: <46CBC206-E0CA-4249-81CD-10F75DA30441@tencent.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
We want to introduce a new version of qemu_open() that uses an Error
object for reporting problems and make this it the preferred interface.
Rename the existing method to release the namespace for the new impl.
Reviewed-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Reviewed-by: Markus Armbruster <armbru@redhat.com>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
qemu_hexdump()'s pointer to the buffer and length of the
buffer are closely related arguments but are widely separated
in the argument list order (also, the format of <stdio.h>
function prototypes is usually to have the FILE* argument
coming first).
Reorder the arguments as "fp, prefix, buf, size" which is
more logical.
Suggested-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Reviewed-by: Edgar E. Iglesias <edgar.iglesias@xilinx.com>
Reviewed-by: Stefano Garzarella <sgarzare@redhat.com>
Message-Id: <20200822180950.1343963-3-f4bug@amsat.org>
Signed-off-by: Laurent Vivier <laurent@vivier.eu>
Most uses of qemu_hexdump() do not take an array of char
as input, forcing use of cast. Since we can use this
helper to dump any kind of buffer, use a pointer to void
argument instead.
Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Reviewed-by: Edgar E. Iglesias <edgar.iglesias@xilinx.com>
Reviewed-by: Li Qiang <liq3ea@gmail.com>
Reviewed-by: Stefano Garzarella <sgarzare@redhat.com>
Message-Id: <20200822180950.1343963-2-f4bug@amsat.org>
Signed-off-by: Laurent Vivier <laurent@vivier.eu>
Make the type checking macro name consistent with the TYPE_*
constant.
Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
Reviewed-by: Zhang Chen <chen.zhang@intel.com>
Message-Id: <20200902224311.1321159-41-ehabkost@redhat.com>
Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
Build of QEMU with dtrace fails on macOS:
LINK x86_64-softmmu/qemu-system-x86_64
error: probe colo_compare_miscompare doesn't exist
error: Could not register probes
ld: error creating dtrace DOF section for architecture x86_64
The reason of the error is explained by Adam Leventhal [1]:
Note that is-enabled probes don't have the stability magic so I'm not
sure how things would work if only is-enabled probes were used.
net/colo code uses is-enabled probes to determine if other probes should
be used but colo_compare_miscompare itself is not used explicitly.
Linker doesn't include the symbol and build fails.
The issue can be resolved if is-enabled probe matches the actual trace
point that is used inside the test. Packet dump toggle is replaced with
a compile-time conditional definition.
1. http://markmail.org/message/6grq2ygr5nwdwsnb
Fixes: f4b618360e ("colo-compare: add TCP, UDP, ICMP packet comparison")
Cc: Philippe Mathieu-Daudé <philmd@redhat.com>
Cc: Cameron Esfahani <dirty@apple.com>
Signed-off-by: Roman Bolshakov <r.bolshakov@yadro.com>
Reviewed-by: Zhang Chen <chen.zhang@intel.com>
Message-id: 20200717093517.73397-5-r.bolshakov@yadro.com
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Some typedefs and macros are defined after the type check macros.
This makes it difficult to automatically replace their
definitions with OBJECT_DECLARE_TYPE.
Patch generated using:
$ ./scripts/codeconverter/converter.py -i \
--pattern=QOMStructTypedefSplit $(git grep -l '' -- '*.[ch]')
which will split "typdef struct { ... } TypedefName"
declarations.
Followed by:
$ ./scripts/codeconverter/converter.py -i --pattern=MoveSymbols \
$(git grep -l '' -- '*.[ch]')
which will:
- move the typedefs and #defines above the type check macros
- add missing #include "qom/object.h" lines if necessary
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Reviewed-by: Juan Quintela <quintela@redhat.com>
Message-Id: <20200831210740.126168-9-ehabkost@redhat.com>
Reviewed-by: Juan Quintela <quintela@redhat.com>
Message-Id: <20200831210740.126168-10-ehabkost@redhat.com>
Message-Id: <20200831210740.126168-11-ehabkost@redhat.com>
Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
Meson doesn't enjoy the same flexibility we have with Make in choosing
the include path. In particular the tracing headers are using
$(build_root)/$(<D).
In order to keep the include directives unchanged,
the simplest solution is to generate headers with patterns like
"trace/trace-audio.h" and place forwarding headers in the source tree
such that for example "audio/trace.h" includes "trace/trace-audio.h".
This patch is too ugly to be applied to the Makefiles now. It's only
a way to separate the changes to the tracing header files from the
Meson rewrite of the tracing logic.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>