Add classic heading, which is missing here. Keep copyright place empty,
prior authors may add a line later.
Signed-off-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
Message-Id: <20200606081806.23897-3-vsementsov@virtuozzo.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
[eblake: tweak commit message]
Signed-off-by: Eric Blake <eblake@redhat.com>
We guarantee 3.5+ everywhere; remove more dead checks. In general, try
to avoid using version checks and instead prefer to attempt behavior
when possible.
Signed-off-by: John Snow <jsnow@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Message-Id: <20200514035230.25756-1-jsnow@redhat.com>
Signed-off-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Add a new test covering the 'qemu-img bitmap' subcommand, as well as
'qemu-img convert --bitmaps', both added in recent patches.
Signed-off-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Max Reitz <mreitz@redhat.com>
Reviewed-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
Message-Id: <20200521192137.1120211-6-eblake@redhat.com>
It's useful to know how much space can be occupied by qcow2 persistent
bitmaps, even though such metadata is unrelated to the guest-visible
data. Report this value as an additional QMP field, present when
measuring an existing image and output format that both support
bitmaps. Update iotest 178 and 190 to updated output, as well as new
coverage in 190 demonstrating non-zero values made possible with the
recently-added qemu-img bitmap command (see 3b51ab4b).
The new 'bitmaps size:' field is displayed automatically as part of
'qemu-img measure' any time it is present in QMP (that is, any time
both the source image being measured and destination format support
bitmaps, even if the measurement is 0 because there are no bitmaps
present). If the field is absent, it means that no bitmaps can be
copied (source, destination, or both lack bitmaps, including when
measuring based on size rather than on a source image). This behavior
is compatible with an upcoming patch adding 'qemu-img convert
--bitmaps': that command will fail in the same situations where this
patch omits the field.
The addition of a new field demonstrates why we should always
zero-initialize qapi C structs; while the qcow2 driver still fully
populates all fields, the raw and crypto drivers had to be tweaked to
avoid uninitialized data.
Consideration was also given towards having a 'qemu-img measure
--bitmaps' which errors out when bitmaps are not possible, and
otherwise sums the bitmaps into the existing allocation totals rather
than displaying as a separate field, as a potential convenience
factor. But this was ultimately decided to be more complexity than
necessary when the QMP interface was sufficient enough with bitmaps
remaining a separate field.
See also: https://bugzilla.redhat.com/1779904
Reported-by: Nir Soffer <nsoffer@redhat.com>
Signed-off-by: Eric Blake <eblake@redhat.com>
Message-Id: <20200521192137.1120211-3-eblake@redhat.com>
Reviewed-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
A recent change to qemu-img changed expected error message output, but
178 takes long enough to execute that it does not get run by 'make
check' or './check -g quick'.
Fixes: 43d589b074
Signed-off-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
Message-Id: <20200521192137.1120211-2-eblake@redhat.com>
Test that dirty bitmap migration works when we deal with mirror.
Signed-off-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Message-Id: <20200521220648.3255-5-vsementsov@virtuozzo.com>
Signed-off-by: Eric Blake <eblake@redhat.com>
- Introduce real BdrvChildRole
- blk/bdrv_make_empty() functions instead of calling callbacks directly
- mirror: Make sure that source and target size match
- block-copy: Fix uninitialized variable
- block/replication: Avoid cancelling the job twice
- ahci: Log lost IRQs
- iotests: Run pylint and mypy in a testcase
- iotests: log messages from notrun()
-----BEGIN PGP SIGNATURE-----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=JSKK
-----END PGP SIGNATURE-----
Merge remote-tracking branch 'remotes/kevin/tags/for-upstream' into staging
Block layer patches:
- Introduce real BdrvChildRole
- blk/bdrv_make_empty() functions instead of calling callbacks directly
- mirror: Make sure that source and target size match
- block-copy: Fix uninitialized variable
- block/replication: Avoid cancelling the job twice
- ahci: Log lost IRQs
- iotests: Run pylint and mypy in a testcase
- iotests: log messages from notrun()
# gpg: Signature made Mon 18 May 2020 18:05:32 BST
# gpg: using RSA key DC3DEB159A9AF95D3D7456FE7F09B272C88F2FD6
# gpg: issuer "kwolf@redhat.com"
# gpg: Good signature from "Kevin Wolf <kwolf@redhat.com>" [full]
# Primary key fingerprint: DC3D EB15 9A9A F95D 3D74 56FE 7F09 B272 C88F 2FD6
* remotes/kevin/tags/for-upstream: (52 commits)
hw: Use QEMU_IS_ALIGNED() on parallel flash block size
iotests/030: Reduce run time by unthrottling job earlier
hw/ide/ahci: Log lost IRQs
iotests: log messages from notrun()
block/block-copy: Simplify block_copy_do_copy()
block/block-copy: Fix uninitialized variable in block_copy_task_entry
block: Drop @child_class from bdrv_child_perm()
block: Pass BdrvChildRole in remaining cases
block: Drop child_file
block: Drop bdrv_format_default_perms()
block: Make bdrv_filter_default_perms() static
block: Use bdrv_default_perms()
tests: Use child_of_bds instead of child_file
block: Use child_of_bds in remaining places
block: Make filter drivers use child_of_bds
block: Make format drivers use child_of_bds
block: Drop child_backing
block: Make backing files child_of_bds children
block: Drop child_format
block: Switch child_format users to child_of_bds
...
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
test_overlapping_3() throttles its active commit job so it can be sure
the job is still busy when it checks that you can't start a conflicting
streaming job.
However, it only sets the commit job back to full speed when it is
ready, which takes a few seconds while it's throttled. We can already
reset the limit after having checked that block-stream returns an error
and save these seconds.
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Message-Id: <20200513100025.33543-1-kwolf@redhat.com>
Reviewed-by: Alberto Garcia <berto@igalia.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Shift the logging initialization up to occur prior to validation checks,
so that notrun() messages still get printed to console.
(Also, remove the "debugging messages active" message, because we don't
need to see that hundreds of times per iotest suite run.)
Signed-off-by: John Snow <jsnow@redhat.com>
Message-Id: <20200514201614.19941-2-jsnow@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
bdrv_commit() already has a BlockBackend pointing to the BDS that we
want to empty, it just has the wrong permissions.
qemu-img commit has no BlockBackend pointing to the old backing file
yet, but introducing one is simple.
After this commit, bdrv_make_empty() is the only remaining caller of
BlockDriver.bdrv_make_empty().
Signed-off-by: Max Reitz <mreitz@redhat.com>
Message-Id: <20200429141126.85159-5-mreitz@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
[kwolf: Fixed up reference output for 098]
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
We made sure that iotests.py passes pylint. It would be a shame if we
allowed new patches in that break this again, so let's just add a
meta-test case that runs pylint on it.
While we don't pass mypy --strict yet, we can already run it with a few
options that would be part of --strict to make sure that we won't
regress on these aspects at least until we can enable the full thing.
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Message-Id: <20200511163529.349329-3-kwolf@redhat.com>
Reviewed-by: Max Reitz <mreitz@redhat.com>
Reviewed-by: John Snow <jsnow@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
We need to fix only a few places so that iotests.py can pass
mypy --disallow-incomplete-defs, which seems to be a desirable option to
have enabled in the long run.
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Message-Id: <20200511163529.349329-2-kwolf@redhat.com>
Reviewed-by: Max Reitz <mreitz@redhat.com>
Reviewed-by: John Snow <jsnow@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
This tests that the mirror job catches situations where the target node
has a different size than the source node. It must also forbid resize
operations when the job is already running.
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Message-Id: <20200511135825.219437-5-kwolf@redhat.com>
Reviewed-by: Max Reitz <mreitz@redhat.com>
Reviewed-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
229 relies on the mirror running into an I/O error when the target is
smaller than the source. After changing mirror to catch this condition
while starting the job, this test case won't get a job that is paused
for an I/O error any more. Use blkdebug instead to inject an error.
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Message-Id: <20200511135825.219437-3-kwolf@redhat.com>
Reviewed-by: Max Reitz <mreitz@redhat.com>
Reviewed-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
This patch makes the raw image the same size as the file in a different
format that is mirrored as raw to it to avoid errors when mirror starts
to enforce that source and target are the same size.
We check only that the first 512 bytes are zeroed (instead of 64k)
because some image formats create image files that are smaller than 64k,
so trying to read 64k would result in I/O errors. Apart from this, 512
is more appropriate anyway because the raw format driver protects
specifically the first 512 bytes.
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Message-Id: <20200511135825.219437-2-kwolf@redhat.com>
Reviewed-by: Max Reitz <mreitz@redhat.com>
Reviewed-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Since qemu-img map + x-dirty-bitmap remains the easiest way to read
persistent bitmaps at the moment, it makes a reasonable place to add
coverage to ensure we do not regress on the just-added parameters to
qemu-img map.
Signed-off-by: Eric Blake <eblake@redhat.com>
Message-Id: <20200513181455.295267-1-eblake@redhat.com>
All calls to cvtnum check the return value and print the same error
message more or less. And so error reporting moved to cvtnum_full to
reduce code duplication and provide a single error
message. Additionally, cvtnum now wraps cvtnum_full with the existing
default range of 0 to MAX_INT64.
Acked-by: Mark Kanda <mark.kanda@oracle.com>
Signed-off-by: Eyal Moscovici <eyal.moscovici@oracle.com>
Message-Id: <20200513133629.18508-2-eyal.moscovici@oracle.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
[eblake: fix printf formatting, avoid trailing space, change error wording,
reformat commit message]
Signed-off-by: Eric Blake <eblake@redhat.com>
The test checks fulfilling qcow2 requirements for the compression
type feature and zstd compression type operability.
Signed-off-by: Denis Plotnikov <dplotnikov@virtuozzo.com>
Reviewed-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
Tested-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Message-Id: <20200507082521.29210-5-dplotnikov@virtuozzo.com>
Signed-off-by: Max Reitz <mreitz@redhat.com>
The patch adds some preparation parts for incompatible compression type
feature to qcow2 allowing the use different compression methods for
image clusters (de)compressing.
It is implied that the compression type is set on the image creation and
can be changed only later by image conversion, thus compression type
defines the only compression algorithm used for the image, and thus,
for all image clusters.
The goal of the feature is to add support of other compression methods
to qcow2. For example, ZSTD which is more effective on compression than ZLIB.
The default compression is ZLIB. Images created with ZLIB compression type
are backward compatible with older qemu versions.
Adding of the compression type breaks a number of tests because now the
compression type is reported on image creation and there are some changes
in the qcow2 header in size and offsets.
The tests are fixed in the following ways:
* filter out compression_type for many tests
* fix header size, feature table size and backing file offset
affected tests: 031, 036, 061, 080
header_size +=8: 1 byte compression type
7 bytes padding
feature_table += 48: incompatible feature compression type
backing_file_offset += 56 (8 + 48 -> header_change + feature_table_change)
* add "compression type" for test output matching when it isn't filtered
affected tests: 049, 060, 061, 065, 082, 085, 144, 182, 185, 198, 206,
242, 255, 274, 280
Signed-off-by: Denis Plotnikov <dplotnikov@virtuozzo.com>
Reviewed-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Max Reitz <mreitz@redhat.com>
QAPI part:
Acked-by: Markus Armbruster <armbru@redhat.com>
Message-Id: <20200507082521.29210-2-dplotnikov@virtuozzo.com>
Signed-off-by: Max Reitz <mreitz@redhat.com>
055 uses the backup block job to create a compressed backup of an
$IMGFMT image with both qcow2 and vmdk targets. However, cluster
allocation in vmdk is very slow because it flushes the image file after
each L2 update.
There is no reason why we need this level of safety in this test, so
let's disable flushes for vmdk. For the blockdev-backup tests this is
achieved by simply adding the cache.no-flush=on to the drive_add() for
the target. For drive-backup, the caching flags are copied from the
source node, so we'll also add the flag to the source node, even though
it is not vmdk.
This can make the test run significantly faster (though it doesn't make
a difference on tmpfs). In my usual setup it goes from ~45s to ~15s.
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Message-Id: <20200505064618.16267-1-kwolf@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
This tests that the backup job catches situations where the target node
has a different size than the source node. It must also forbid resize
operations when the job is already running.
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Message-Id: <20200430142755.315494-5-kwolf@redhat.com>
Reviewed-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
The test case forgot to specify the null-co size for the target node.
When adding a check to backup that both sizes match, this would fail
because of the size mismatch and not the behaviour that the test really
wanted to test.
Fixes: a541fcc27c
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Message-Id: <20200430142755.315494-2-kwolf@redhat.com>
Reviewed-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
In order to avoid bitrot in the zero cluster code in VMDK, enable
zeroed_grain=on by default for the tests.
059 now unsets the default options because zeroed_grain=on works only
with some subformats and the test case tests many different subformats,
including those for which it doesn't work.
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Message-Id: <20200430133007.170335-7-kwolf@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
After commit f01643fb8b when an image is
extended and BDRV_REQ_ZERO_WRITE is set then the new clusters are
zeroized.
The code however does not detect correctly situations when the old and
the new end of the image are within the same cluster. The problem can
be reproduced with these steps:
qemu-img create -f qcow2 backing.qcow2 1M
qemu-img create -f qcow2 -F qcow2 -b backing.qcow2 top.qcow2
qemu-img resize --shrink top.qcow2 520k
qemu-img resize top.qcow2 567k
In the last step offset - zero_start causes an integer wraparound.
Signed-off-by: Alberto Garcia <berto@igalia.com>
Message-Id: <20200504155217.10325-1-berto@igalia.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Signed-off-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
Message-Id: <20200430124713.3067-9-vsementsov@virtuozzo.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Signed-off-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
Message-Id: <20200430124713.3067-8-vsementsov@virtuozzo.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Signed-off-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
Message-Id: <20200430124713.3067-7-vsementsov@virtuozzo.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Instead of looping in each test, let's better refactor vmdk target case
as a subclass.
Signed-off-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
Message-Id: <20200430124713.3067-6-vsementsov@virtuozzo.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Drop check for no block-jobs: it's obvious that there no jobs
immediately after vm.launch().
Signed-off-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
Message-Id: <20200430124713.3067-5-vsementsov@virtuozzo.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Skip test-case with quorum if quorum is not whitelisted.
Signed-off-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
Message-Id: <20200430124713.3067-4-vsementsov@virtuozzo.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Test fails if bochs not whitelisted, so, skip it in this case.
Signed-off-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
Message-Id: <20200430124713.3067-3-vsementsov@virtuozzo.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Some tests requires O_DIRECT, or want it by default. Introduce smarter
O_DIRECT handling:
- Check O_DIRECT in common.rc, if it is requested by selected
cache-mode.
- Support second fall-through argument in _default_cache_mode
Inspired-by: Max's 23e1d05411
Signed-off-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
Message-Id: <20200430124713.3067-2-vsementsov@virtuozzo.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Commit f62514b3de made qemu-img reject -o "" but this test uses it.
Since this test only tries to do a dry-run run of qemu-img amend,
replace the -o "" with dummy -o "size=$size".
Fixes: f62514b3de
Signed-off-by: Maxim Levitsky <mlevitsk@redhat.com>
Message-Id: <20200504131959.9533-1-mlevitsk@redhat.com>
Signed-off-by: Max Reitz <mreitz@redhat.com>
It's been a while since we got rid of the sector-based bdrv_read and
bdrv_write (commit 2e11d756); let's finish the job on a few remaining
comments.
Signed-off-by: Eric Blake <eblake@redhat.com>
Message-Id: <20200428213807.776655-1-eblake@redhat.com>
Reviewed-by: Alberto Garcia <berto@igalia.com>
Signed-off-by: Max Reitz <mreitz@redhat.com>
We originally refused to allow resize of images with internal
snapshots because the v2 image format did not require the tracking of
snapshot size, making it impossible to safely revert to a snapshot
with a different size than the current view of the image. But the
snapshot size tracking was rectified in v3, and our recent fixes to
qemu-img amend (see 0a85af35) guarantee that we always have a valid
snapshot size. Thus, we no longer need to artificially limit image
resizes, but it does become one more thing that would prevent a
downgrade back to v2. And now that we support different-sized
snapshots, it's also easy to fix reverting to a snapshot to apply the
new size.
Upgrade iotest 61 to cover this (we previously had NO coverage of
refusal to resize while snapshots exist). Note that the amend process
can fail but still have effects: in particular, since we break things
into upgrade, resize, downgrade, a failure during resize does not roll
back changes made during upgrade, nor does failure in downgrade roll
back a resize. But this situation is pre-existing even without this
patch; and without journaling, the best we could do is minimize the
chance of partial failure by collecting all changes prior to doing any
writes - which adds a lot of complexity but could still fail with EIO.
On the other hand, we are careful that even if we have partial
modification but then fail, the image is left viable (that is, we are
careful to sequence things so that after each successful cluster
write, there may be transient leaked clusters but no corrupt
metadata). And complicating the code to make it more transaction-like
is not worth the effort: a user can always request multiple 'qemu-img
amend' changing one thing each, if they need finer-grained control
over detecting the first failure than what they get by letting qemu
decide how to sequence multiple changes.
Signed-off-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Max Reitz <mreitz@redhat.com>
Message-Id: <20200428192648.749066-3-eblake@redhat.com>
Signed-off-by: Max Reitz <mreitz@redhat.com>
We can turn logging on/off globally instead of per-function.
Remove use_log from run_job, and use python logging to turn on
diffable output when we run through a script entry point.
iotest 245 changes output order due to buffering reasons.
An extended note on python logging:
A NullHandler is added to `qemu.iotests` to stop output from being
generated if this code is used as a library without configuring logging.
A NullHandler is only needed at the root, so a duplicate handler is not
needed for `qemu.iotests.diff_io`.
When logging is not configured, messages at the 'WARNING' levels or
above are printed with default settings. The NullHandler stops this from
occurring, which is considered good hygiene for code used as a library.
See https://docs.python.org/3/howto/logging.html#library-config
When logging is actually enabled (always at the behest of an explicit
call by a client script), a root logger is implicitly created at the
root, which allows messages to propagate upwards and be handled/emitted
from the root logger with default settings.
When we want iotest logging, we attach a handler to the
qemu.iotests.diff_io logger and disable propagation to avoid possible
double-printing.
For more information on python logging infrastructure, I highly
recommend downloading the pip package `logging_tree`, which provides
convenient visualizations of the hierarchical logging configuration
under different circumstances.
See https://pypi.org/project/logging_tree/ for more information.
Signed-off-by: John Snow <jsnow@redhat.com>
Reviewed-by: Max Reitz <mreitz@redhat.com>
Message-Id: <20200331000014.11581-15-jsnow@redhat.com>
Reviewed-by: Kevin Wolf <kwolf@redhat.com>
Signed-off-by: Max Reitz <mreitz@redhat.com>
Mark the verify functions as "private" with a leading underscore, to
discourage their use. Update type signatures while we're here.
(Also, make pending patches not yet using the new entry points fail in a
very obvious way.)
Signed-off-by: John Snow <jsnow@redhat.com>
Message-Id: <20200331000014.11581-14-jsnow@redhat.com>
Reviewed-by: Max Reitz <mreitz@redhat.com>
Reviewed-by: Kevin Wolf <kwolf@redhat.com>
Signed-off-by: Max Reitz <mreitz@redhat.com>
Since this one is nicely factored to use a single entry point,
use script_main to run the tests.
Signed-off-by: John Snow <jsnow@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Reviewed-by: Max Reitz <mreitz@redhat.com>
Message-Id: <20200331000014.11581-13-jsnow@redhat.com>
Reviewed-by: Kevin Wolf <kwolf@redhat.com>
Signed-off-by: Max Reitz <mreitz@redhat.com>
Like script_main, but doesn't require a single point of entry.
Replace all existing initialization sections with this drop-in replacement.
This brings debug support to all existing script-style iotests.
Signed-off-by: John Snow <jsnow@redhat.com>
Reviewed-by: Max Reitz <mreitz@redhat.com>
Message-Id: <20200331000014.11581-12-jsnow@redhat.com>
Reviewed-by: Kevin Wolf <kwolf@redhat.com>
[mreitz: Give 274 the same treatment]
Signed-off-by: Max Reitz <mreitz@redhat.com>
Minor cleanup for HMP functions; helps with line length and consolidates
HMP helpers through one implementation function.
Although we are adding a universal toggle to turn QMP logging on or off,
many existing callers to hmp functions don't expect that output to be
logged, which causes quite a few changes in the test output.
For now, offer a use_log parameter.
Typing notes:
QMPResponse is just an alias for Dict[str, Any]. It holds no special
meanings and it is not a formal subtype of Dict[str, Any]. It is best
thought of as a lexical synonym.
We may well wish to add stricter subtypes in the future for certain
shapes of data that are not formalized as Python objects, at which point
we can simply retire the alias and allow mypy to more strictly check
usages of the name.
Signed-off-by: John Snow <jsnow@redhat.com>
Message-Id: <20200331000014.11581-11-jsnow@redhat.com>
Reviewed-by: Max Reitz <mreitz@redhat.com>
Reviewed-by: Kevin Wolf <kwolf@redhat.com>
Signed-off-by: Max Reitz <mreitz@redhat.com>
79 is the PEP8 recommendation. This recommendation works well for
reading patch diffs in TUI email clients.
Signed-off-by: John Snow <jsnow@redhat.com>
Reviewed-by: Max Reitz <mreitz@redhat.com>
Message-Id: <20200331000014.11581-10-jsnow@redhat.com>
Reviewed-by: Kevin Wolf <kwolf@redhat.com>
Signed-off-by: Max Reitz <mreitz@redhat.com>
Representing nested, recursive data structures in mypy is notoriously
difficult; the best we can reliably do right now is denote the leaf
types as "Any" while describing the general shape of the data.
Regardless, this fully annotates the log() function.
Typing notes:
TypeVar is a Type variable that can optionally be constrained by a
sequence of possible types. This variable is bound to a specific type
per-invocation, like a Generic.
log() behaves as log<Msg>() now, where the incoming type informs the
signature it expects for any filter arguments passed in. If Msg is a
str, then filter should take and return a str.
Signed-off-by: John Snow <jsnow@redhat.com>
Reviewed-by: Max Reitz <mreitz@redhat.com>
Message-Id: <20200331000014.11581-9-jsnow@redhat.com>
Reviewed-by: Kevin Wolf <kwolf@redhat.com>
Signed-off-by: Max Reitz <mreitz@redhat.com>
We no longer need to accommodate <3.4, drop this code.
(The lines were > 79 chars and it stood out.)
Signed-off-by: John Snow <jsnow@redhat.com>
Reviewed-by: Max Reitz <mreitz@redhat.com>
Message-Id: <20200331000014.11581-8-jsnow@redhat.com>
Reviewed-by: Kevin Wolf <kwolf@redhat.com>
Signed-off-by: Max Reitz <mreitz@redhat.com>
I had to fix a merge conflict, so do this tiny harmless thing while I'm
here.
Signed-off-by: John Snow <jsnow@redhat.com>
Reviewed-by: Max Reitz <mreitz@redhat.com>
Message-Id: <20200331000014.11581-7-jsnow@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Reviewed-by: Kevin Wolf <kwolf@redhat.com>
Signed-off-by: Max Reitz <mreitz@redhat.com>
This allows others to get repeatable results with pylint. If you run
`pylint iotests.py`, you should see a 100% pass.
Signed-off-by: John Snow <jsnow@redhat.com>
Reviewed-by: Max Reitz <mreitz@redhat.com>
Message-Id: <20200331000014.11581-6-jsnow@redhat.com>
Reviewed-by: Kevin Wolf <kwolf@redhat.com>
Signed-off-by: Max Reitz <mreitz@redhat.com>
It's bad hygiene: if we modify this list, it will be modified across all
invocations.
(Remaining bad usages are fixed in a subsequent patch which changes the
function signature anyway.)
Signed-off-by: John Snow <jsnow@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Reviewed-by: Max Reitz <mreitz@redhat.com>
Message-Id: <20200331000014.11581-5-jsnow@redhat.com>
Reviewed-by: Kevin Wolf <kwolf@redhat.com>
Signed-off-by: Max Reitz <mreitz@redhat.com>
The right way to solve this is to come up with a virtual environment
infrastructure that sets all the paths correctly, and/or to create
installable python modules that can be imported normally.
That's hard, so just silence this error for now.
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Reviewed-by: Max Reitz <mreitz@redhat.com>
Signed-off-by: John Snow <jsnow@redhat.com>
Message-Id: <20200331000014.11581-4-jsnow@redhat.com>
Reviewed-by: Kevin Wolf <kwolf@redhat.com>
Signed-off-by: Max Reitz <mreitz@redhat.com>