However I think the following fix is cleaner: we do not need a
dumb_display_init that creates an empty DisplayChangeListener any more.
We do need a dumb_display_init that allocates a zeroed DisplayState
structure if none else does it.
Tested-by: Shin-ichiro KAWASAKI <kawasaki@juno.dti.ne.jp>
Signed-off-by: Stefano Stabellini <stefano.stabellini@eu.citrix.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
git-svn-id: svn://svn.savannah.nongnu.org/qemu/trunk@6369 c046a42c-6fe2-441c-8c8c-71466251a162
And use it for the malta emulation. Fix segfault introduced in
revision 6352.
Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
git-svn-id: svn://svn.savannah.nongnu.org/qemu/trunk@6365 c046a42c-6fe2-441c-8c8c-71466251a162
The DisplayState refactoring changed the machine init function to create a
DisplayState for each VGA device instead of being passed an existing
DisplayState. This change is critical to enable multiple graphics device
support.
Unfortunately, the serial/parallel/console code is structured today to run
before machine init to fill out the CharDriverState table which the machine
init function uses to determine whether to create the required devices.
Since a 'vc' is a type of CharDriverState, the CharDriverState code requires
that a DisplayState exist before it runs creating a circular dependency.
To fix this, this splits the creation of the initial CharDriverState from
the initialization of the text console. We can then in a second step associate
a DisplayState with all TextConsoles. This allows us to create the
CharDriverState's first, machine init, then associate the TextConsoles with
a DisplayState.
This code screams for more cleanup.
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
git-svn-id: svn://svn.savannah.nongnu.org/qemu/trunk@6352 c046a42c-6fe2-441c-8c8c-71466251a162
Patch 5/7
This patch changes the graphical_console_init function to return an
allocated DisplayState instead of a QEMUConsole.
This patch contains just the graphical_console_init change and few other
modifications mainly in console.c and vl.c.
It was necessary to move the display frontends (e.g. sdl and vnc)
initialization after machine->init in vl.c.
This patch does *not* include any required changes to any device, these
changes come with the following patches.
Patch 6/7
This patch changes the QEMUMachine init functions not to take a
DisplayState as an argument because is not needed any more;
In few places the graphic hardware initialization function was called
only if DisplayState was not NULL, now they are always called.
Apart from these cases, the rest are all mechanical substitutions.
Patch 7/7
This patch updates the graphic device code to use the new
graphical_console_init function.
As for the previous patch, in few places graphical_console_init was called
only if DisplayState was not NULL, now it is always called.
Apart from these cases, the rest are all mechanical substitutions.
Signed-off-by: Stefano Stabellini <stefano.stabellini@eu.citrix.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
git-svn-id: svn://svn.savannah.nongnu.org/qemu/trunk@6344 c046a42c-6fe2-441c-8c8c-71466251a162
This is a large patch that changes all occurrences of logfile/loglevel
global variables to use the new qemu_log*() macros.
Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
git-svn-id: svn://svn.savannah.nongnu.org/qemu/trunk@6338 c046a42c-6fe2-441c-8c8c-71466251a162
This patch changes the DisplayState interface adding support for
multiple frontends at the same time (sdl and vnc) and implements most
of the benefit of the shared_buf patch without the added complexity.
Currently DisplayState is managed by sdl (or vnc) and sdl (or vnc) is
also responsible for allocating the data and setting the depth.
Vga.c (or another backend) will do any necessary conversion.
The idea is to change it so that is vga.c (or another backend) together
with console.c that fully manage the DisplayState interface allocating
data and setting the depth (either 16 or 32 bit, if the guest uses a
different resolution or is in text mode, vga.c (or another backend) is
in charge of doing the conversion seamlessly).
The other idea is that DisplayState supports *multiple* frontends
like sdl and vnc; each of them can register some callbacks to be called
when a display event occurs.
The interesting changes are:
- the new structures and related functions in console.h and console.c
in particular the following functions are very helpful to manage a
DisplaySurface:
qemu_create_displaysurface
qemu_resize_displaysurface
qemu_create_displaysurface_from
qemu_free_displaysurface
- console_select and qemu_console_resize in console.c
this two functions manage multiple consoles on a single host display
- moving code around in hw/vga.c
as for the shared_buf patch this is necessary to be able to handle a dynamic
DisplaySurface bpp
- changes to vga_draw_graphic in hw/vga.c
this is the place where the DisplaySurface buffer is shared with the
videoram, when possible;
Compared to the last version the only changes are:
- do not remove support to dpy_copy in cirrus_vga
- change the name of the displaysurface handling functions
Signed-off-by: Stefano Stabellini <stefano.stabellini@eu.citrix.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
git-svn-id: svn://svn.savannah.nongnu.org/qemu/trunk@6336 c046a42c-6fe2-441c-8c8c-71466251a162
Use macros to avoid #ifdefs on debugging code.
This patch doesn't try to merge logging macros from different files,
but just unify the debugging code #ifdefs onto a macro on each file. A
further cleanup can unify the debugging macros on a common header, later
Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
git-svn-id: svn://svn.savannah.nongnu.org/qemu/trunk@6332 c046a42c-6fe2-441c-8c8c-71466251a162
currently there is no way to fully disable any graphic card device for
the PC architecture.
You can have no graphical output, thanks to -nographic, but you would
have the VGA device connected to your PCI bus anyway.
There is already a convenient -vga option to choose between std, cirrus
and vmware; this patch add the new option "none" to select no graphic
card at all.
Signed-off-by: Stefano Stabellini <stefano.stabellini@eu.citrix.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
git-svn-id: svn://svn.savannah.nongnu.org/qemu/trunk@6322 c046a42c-6fe2-441c-8c8c-71466251a162
After my last patch to fix interrupt coalescing was rejected
on the basis that it is too intrusive we decided to make the
fix much more localized and only fix the problem for RTC time
source. Unfortunately it is impossible to fix the problem entirely
inside RTC code like Andrzej proposed since Windows reads RTC
register C more then once on each time interrupt so it is impossible
to count reliably how many interrupt windows actually handled.
Proposed solution is localized to I386 target and is disabled by
default. To enable it "-rtc-td-hack" flag should be used.
Signed-off-by: Gleb Natapov <gleb@redhat.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
git-svn-id: svn://svn.savannah.nongnu.org/qemu/trunk@6320 c046a42c-6fe2-441c-8c8c-71466251a162
This patch adds the typical qemu console command line switch to the virtio
console. using -virtioconsole ARG it can now be specified what output a guest
hvc should be redirected to.
Signed-off-by: Christian Ehrhardt <ehrhardt@linux.vnet.ibm.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
git-svn-id: svn://svn.savannah.nongnu.org/qemu/trunk@6317 c046a42c-6fe2-441c-8c8c-71466251a162
This patch adds the virtio console to qemu. This console can be found after the
serial and parallel outputs as another virtual console. In the -nographic case
it is redirected to the null output by default.
Signed-off-by: Christian Ehrhardt <ehrhardt@linux.vnet.ibm.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
git-svn-id: svn://svn.savannah.nongnu.org/qemu/trunk@6315 c046a42c-6fe2-441c-8c8c-71466251a162
ac97 has drivers for Vista 64-bit whereas sb16 and es1370 do not appear to. I
asked malc why it was disabled and he said it was because it was GPL. He did
not object to enabling it now that more QEMU code is GPL'd.
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
git-svn-id: svn://svn.savannah.nongnu.org/qemu/trunk@6253 c046a42c-6fe2-441c-8c8c-71466251a162
Allow the user to supply a vlan client name on the command line.
This is probably only useful for management tools so that they can
use their own names rather than parsing the output of 'info network'.
Signed-off-by: Mark McLoughlin <markmc@redhat.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
git-svn-id: svn://svn.savannah.nongnu.org/qemu/trunk@6220 c046a42c-6fe2-441c-8c8c-71466251a162
Windows calculates HW "uniqueness" based on a hard drive serial number
among other things. The patch allows to specify drive serial number
from a command line.
Signed-off-by: Gleb Natapov <gleb@redhat.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
git-svn-id: svn://svn.savannah.nongnu.org/qemu/trunk@6214 c046a42c-6fe2-441c-8c8c-71466251a162
Change from v1:
Avoid changing the existing coding style in certain files.
Signed-off-by: Stuart Brady <stuart.brady@gmail.com>
git-svn-id: svn://svn.savannah.nongnu.org/qemu/trunk@6120 c046a42c-6fe2-441c-8c8c-71466251a162
Since the introduction of net.c in r5581 there had been 2 places where
the location of the TAP helper scripts and SMB daemon are defined.
The following patch move those definitions to net.h so they are accessible
for net.c and vl.c but defined only once
(Carlo Marcelo Arenas Belon)
git-svn-id: svn://svn.savannah.nongnu.org/qemu/trunk@6093 c046a42c-6fe2-441c-8c8c-71466251a162
This patch adds HPET emulation. It can be disabled with -disable-hpet. An hpet
provides a more finely granular clocksource than otherwise available on PC.
This means that latency-dependent applications (e.g. multimedia) will generally
be smoother when using the HPET.
Signed-off-by: Beth Kon <eak@us.ibm.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
git-svn-id: svn://svn.savannah.nongnu.org/qemu/trunk@6081 c046a42c-6fe2-441c-8c8c-71466251a162
Currently on x86, qemu initializes CPUState but KVM ignores it and does its
own vcpu initialization. However, PowerPC KVM needs to be able to set the
initial register state to support the -kernel and -append options.
Signed-off-by: Hollis Blanchard <hollisb@us.ibm.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
git-svn-id: svn://svn.savannah.nongnu.org/qemu/trunk@6060 c046a42c-6fe2-441c-8c8c-71466251a162
qcow2 writes a cluster reference count on every cluster update. This causes
performance to crater when using anything but cache=writeback. This is most
noticeable when using savevm. Right now, qcow2 isn't a reliable format
regardless of the type of cache your using because metadata is not updated in
the correct order. Considering this, I think it's somewhat reasonable to use
writeback caching by default with qcow2 files.
It at least avoids the massive performance regression for users until we sort
out the issues in qcow2.
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
git-svn-id: svn://svn.savannah.nongnu.org/qemu/trunk@5879 c046a42c-6fe2-441c-8c8c-71466251a162
Balloon devices allow you to ask the guest to allocate memory. This allows you
to release that memory. It's mostly useful for freeing up large chunks of
memory from cooperative guests.
Ballooning is supported by both Xen and VirtIO.
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
git-svn-id: svn://svn.savannah.nongnu.org/qemu/trunk@5873 c046a42c-6fe2-441c-8c8c-71466251a162
Virtio-blk is a paravirtual block device based on VirtIO. It can be used by
specifying the if=virtio parameter to the -drive parameter.
When using -enable-kvm, it can achieve very good performance compared to IDE or
SCSI.
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
git-svn-id: svn://svn.savannah.nongnu.org/qemu/trunk@5870 c046a42c-6fe2-441c-8c8c-71466251a162
Changeset r5636 changed the timers to run in the alarm callback. The
alarm callback can only be called as frequently as the host alarm timer
fires. For older Linux hosts and possibly non-Linux hosts, this can be
as high as a 1ms granularity.
icount calculates the select timeout based on the next deadline and
select is usually capable of sleeping for a short period of time than
alarm timer granularity. This means that changing the timer callbacks
to be based on alarm firing caused timers to fire much later than they
ought to when using icount.
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
git-svn-id: svn://svn.savannah.nongnu.org/qemu/trunk@5796 c046a42c-6fe2-441c-8c8c-71466251a162
This patch enhances QEMU's built-in debugger for SMP guest debugging.
Using the thread support of the gdb remote protocol, each VCPU is mapped
on a pseudo thread and exposed to the gdb frontend. This way you can
easy switch the focus of gdb between the VCPUs and observe their states.
On breakpoint hit, the focus is automatically adjusted just as for
normal multi-threaded application under gdb control.
Furthermore, the patch propagates breakpoint and watchpoint insertions
or removals to all CPUs, not just the current one as it was the case so
far. Without this, SMP guest debugging was practically unfeasible.
Signed-off-by: Jan Kiszka <jan.kiszka@siemens.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
git-svn-id: svn://svn.savannah.nongnu.org/qemu/trunk@5743 c046a42c-6fe2-441c-8c8c-71466251a162
This is pure code motion. The savevm code is all common code so we can build
it once and share the object with all executables.
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
git-svn-id: svn://svn.savannah.nongnu.org/qemu/trunk@5700 c046a42c-6fe2-441c-8c8c-71466251a162
KVM's live migration support included support for exec: URLs, allowing system
state to be written or received via an arbitrary popen()ed subprocess. This
provides a convenient way to pipe state through a compression algorithm or an
arbitrary network transport on its way to its destination, and a convenient way
to write state to disk; libvirt's qemu driver currently uses migration to exec:
targets for this latter purpose.
This version of the patch refactors now-common code from migrate-tcp.c into
migrate.c.
Signed-off-by: Charles Duffy <Charles_Duffy@messageone.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
git-svn-id: svn://svn.savannah.nongnu.org/qemu/trunk@5694 c046a42c-6fe2-441c-8c8c-71466251a162
Currently tap does not generate signals on I/O; this causes
network latency to be dependent on the timer tick (1ms without
dyntick, guest dependent with dyntick). By generating a signal
on I/O, we can inform the guest immediately that a packet has
arrived.
Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
git-svn-id: svn://svn.savannah.nongnu.org/qemu/trunk@5688 c046a42c-6fe2-441c-8c8c-71466251a162
host_alarm_timer fires in a separate thread. The windows build current
uses SetEvent() and WaitEvent() to then notify the main thread. This is
functionally equivalent to what we're doing in Unix with pipe(). So let's
just #ifdef the pipe() code on Windows since it doesn't build there anyway.
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
git-svn-id: svn://svn.savannah.nongnu.org/qemu/trunk@5637 c046a42c-6fe2-441c-8c8c-71466251a162
This further cleans up the main loop getting it a lot closer to what a main
loop should be.
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
git-svn-id: svn://svn.savannah.nongnu.org/qemu/trunk@5636 c046a42c-6fe2-441c-8c8c-71466251a162
Changing the default IO timeout to 5 s (#5578) made a race visible
between the alarm_timer and select() in main_loop_wait(): If the timer
fired before select was able to block, the full select() timeout could
have been applied instead of returning immediately. Since #5578, this
causes heavy problems to the Musicpal board emulation with stalls up to
5 s, but also with some older Linux guest kernels.
The following patch introduces a pipe that is written to by
host_alarm_handler and select()'ed in main_loop_wait(). This avoids
prevents that select() blocks though a timer has fired and waits for
processing.
Signed-off-by: Jan Kiszka <jan.kiszka@web.de>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
git-svn-id: svn://svn.savannah.nongnu.org/qemu/trunk@5633 c046a42c-6fe2-441c-8c8c-71466251a162
This patch adds very basic KVM support. KVM is a kernel module for Linux that
allows userspace programs to make use of hardware virtualization support. It
current supports x86 hardware virtualization using Intel VT-x or AMD-V. It
also supports IA64 VT-i, PPC 440, and S390.
This patch only implements the bare minimum support to get a guest booting. It
has very little impact the rest of QEMU and attempts to integrate nicely with
the rest of QEMU.
Even though this implementation is basic, it is significantly faster than TCG.
Booting and shutting down a Linux guest:
w/TCG: 1:32.36 elapsed 84% CPU
w/KVM: 0:31.14 elapsed 59% CPU
Right now, KVM is disabled by default and must be explicitly enabled with
-enable-kvm. We can enable it by default later when we have had better
testing.
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
git-svn-id: svn://svn.savannah.nongnu.org/qemu/trunk@5627 c046a42c-6fe2-441c-8c8c-71466251a162
It is safe not to set dpy_refresh and that's used to indicate that the display
doesn't need updates. This saves us two wakeups per second.
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
git-svn-id: svn://svn.savannah.nongnu.org/qemu/trunk@5583 c046a42c-6fe2-441c-8c8c-71466251a162
The motivating goal behind this is to allow other tools to use the CharDriver
code. This patch is pure code motion except for the Makefile changes and the
copyright/header in qemu-char.c.
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
git-svn-id: svn://svn.savannah.nongnu.org/qemu/trunk@5580 c046a42c-6fe2-441c-8c8c-71466251a162
The goal of this series is to move the CharDriverState code out of vl.c and
into its own file, qemu-char.c. This patch moves around some declarations so
the next patch can be pure code motion.
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
git-svn-id: svn://svn.savannah.nongnu.org/qemu/trunk@5579 c046a42c-6fe2-441c-8c8c-71466251a162
With the recent changes to the main loop, we no longer have unconditional
polling. This means we can now sleep in select() for much longer than we
previously did. This patch increases our select() sleep time from 10ms to 5s
which is effectively unlimited since we're going to wake up sooner than that
in almost all circumstances.
With this patch, I see the number of wake-ups with an idle dynamic ticks guest
drop from 80 per second to about 15 times per second.
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
git-svn-id: svn://svn.savannah.nongnu.org/qemu/trunk@5578 c046a42c-6fe2-441c-8c8c-71466251a162
Tidy up win32 main loop bits, allow timeout >= 1s, and force timeout to 0 if
there is a pending bottom half.
git-svn-id: svn://svn.savannah.nongnu.org/qemu/trunk@5577 c046a42c-6fe2-441c-8c8c-71466251a162
This patch makes qemu keep track of the character devices in use and
implements a "info chardev" monitor command to print a list.
qemu_chr_open() sticks the devices into a linked list now. It got a new
argument (label), so there is a name for each device. It also assigns a
filename to each character device. By default it just copyes the
filename passed in. Individual drivers can fill in something else
though. qemu_chr_open_pty() sets the filename to name of the pseudo tty
allocated.
Output looks like this:
(qemu) info chardev
monitor: filename=unix:/tmp/run.sh-26827/monitor,server,nowait
serial0: filename=unix:/tmp/run.sh-26827/console,server
serial1: filename=pty:/dev/pts/5
parallel0: filename=vc:640x480
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
git-svn-id: svn://svn.savannah.nongnu.org/qemu/trunk@5575 c046a42c-6fe2-441c-8c8c-71466251a162
The current DMA routines are driven by a call in main_loop_wait() after every
select.
This patch converts the DMA code to be driven by a constantly rescheduled
bottom half. The advantage of using a scheduled bottom half is that we can
stop scheduling the bottom half when there no DMA channels are runnable. This
means we can potentially detect this case and sleep longer in the main loop.
The only two architectures implementing DMA_run() are cris and i386. For cris,
I converted it to a simple repeating bottom half. I've only compile tested
this as cris does not seem to work on a 64-bit host. It should be functionally
identical to the previous implementation so I expect it to work.
For x86, I've made sure to only fire the DMA bottom half if there is a DMA
channel that is runnable. The effect of this is that unless you're using sb16
or a floppy disk, the DMA bottom half never fires.
You probably should test this malc. My own benchmarks actually show slight
improvement by it's possible the change in timing could affect your demos.
Since v1, I've changed the code to use a BH instead of a timer. cris at least
seems to depend on faster than 10ms polling.
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
git-svn-id: svn://svn.savannah.nongnu.org/qemu/trunk@5573 c046a42c-6fe2-441c-8c8c-71466251a162