Commit graph

852 commits

Author SHA1 Message Date
Dr. David Alan Gilbert ce62df5378 migration: register_savevm_live doesn't need dev
Commit 78dd48df3 removed the last caller of register_savevm_live for an
instantiable device (rather than a single system wide device);
so trim out the parameter.

Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Message-Id: <20190822115433.12070-1-dgilbert@redhat.com>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Reviewed-by: Cornelia Huck <cohuck@redhat.com>
Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
2019-09-12 11:15:03 +01:00
Tony Nguyen d5d680cacc memory: Access MemoryRegion with endianness
Preparation for collapsing the two byte swaps adjust_endianness and
handle_bswap into the former.

Call memory_region_dispatch_{read|write} with endianness encoded into
the "MemOp op" operand.

This patch does not change any behaviour as
memory_region_dispatch_{read|write} is yet to handle the endianness.

Once it does handle endianness, callers with byte swaps can collapse
them into adjust_endianness.

Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Tony Nguyen <tony.nguyen@bt.com>
Message-Id: <8066ab3eb037c0388dfadfe53c5118429dd1de3a.1566466906.git.tony.nguyen@bt.com>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
2019-09-03 08:30:39 -07:00
Tony Nguyen c1adc22733 hw/s390x: Hard code size with MO_{8|16|32|64}
Temporarily no-op size_memop was introduced to aid the conversion of
memory_region_dispatch_{read|write} operand "unsigned size" into
"MemOp op".

Now size_memop is implemented, again hard coded size but with
MO_{8|16|32|64}. This is more expressive and avoids size_memop calls.

Signed-off-by: Tony Nguyen <tony.nguyen@bt.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Cornelia Huck <cohuck@redhat.com>
Message-Id: <76dc97273a8eb5e10170ffc16526863df808f487.1566466906.git.tony.nguyen@bt.com>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
2019-09-03 08:30:39 -07:00
Tony Nguyen bd8b5319be hw/s390x: Access MemoryRegion with MemOp
The memory_region_dispatch_{read|write} operand "unsigned size" is
being converted into a "MemOp op".

Convert interfaces by using no-op size_memop.

After all interfaces are converted, size_memop will be implemented
and the memory_region_dispatch_{read|write} operand "unsigned size"
will be converted into a "MemOp op".

As size_memop is a no-op, this patch does not change any behaviour.

Signed-off-by: Tony Nguyen <tony.nguyen@bt.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Cornelia Huck <cohuck@redhat.com>
Message-Id: <2f41da26201fb9b0339c2b7fde34df864f7f9ea8.1566466906.git.tony.nguyen@bt.com>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
2019-09-03 08:30:38 -07:00
Cornelia Huck 9aec2e52ce hw: add compat machines for 4.2
Add 4.2 machine types for arm/i440fx/q35/s390x/spapr.

For i440fx and q35, unversioned cpu models are still translated
to -v1, as 0788a56bd1 ("i386: Make unversioned CPU models be
aliases") states this should only transition to the latest cpu
model version in 4.3 (or later).

Signed-off-by: Cornelia Huck <cohuck@redhat.com>
Message-Id: <20190724103524.20916-1-cohuck@redhat.com>
Reviewed-by: Eduardo Habkost <ehabkost@redhat.com>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
2019-08-21 11:32:11 +10:00
Markus Armbruster 54d31236b9 sysemu: Split sysemu/runstate.h off sysemu/sysemu.h
sysemu/sysemu.h is a rather unfocused dumping ground for stuff related
to the system-emulator.  Evidence:

* It's included widely: in my "build everything" tree, changing
  sysemu/sysemu.h still triggers a recompile of some 1100 out of 6600
  objects (not counting tests and objects that don't depend on
  qemu/osdep.h, down from 5400 due to the previous two commits).

* It pulls in more than a dozen additional headers.

Split stuff related to run state management into its own header
sysemu/runstate.h.

Touching sysemu/sysemu.h now recompiles some 850 objects.  qemu/uuid.h
also drops from 1100 to 850, and qapi/qapi-types-run-state.h from 4400
to 4200.  Touching new sysemu/runstate.h recompiles some 500 objects.

Since I'm touching MAINTAINERS to add sysemu/runstate.h anyway, also
add qemu/main-loop.h.

Suggested-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Message-Id: <20190812052359.30071-30-armbru@redhat.com>
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
[Unbreak OS-X build]
2019-08-16 13:37:36 +02:00
Markus Armbruster 2f780b6a91 sysemu: Move the VMChangeStateEntry typedef to qemu/typedefs.h
In my "build everything" tree, changing sysemu/sysemu.h triggers a
recompile of some 1800 out of 6600 objects (not counting tests and
objects that don't depend on qemu/osdep.h, down from 5400 due to the
previous commit).

Several headers include sysemu/sysemu.h just to get typedef
VMChangeStateEntry.  Move it from sysemu/sysemu.h to qemu/typedefs.h.
Spell its structure tag the same while there.  Drop the now
superfluous includes of sysemu/sysemu.h from headers.

Touching sysemu/sysemu.h now recompiles some 1100 objects.
qemu/uuid.h also drops from 1800 to 1100, and
qapi/qapi-types-run-state.h from 5000 to 4400.

Signed-off-by: Markus Armbruster <armbru@redhat.com>
Message-Id: <20190812052359.30071-29-armbru@redhat.com>
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Tested-by: Philippe Mathieu-Daudé <philmd@redhat.com>
2019-08-16 13:31:53 +02:00
Markus Armbruster d5938f29fe Clean up inclusion of sysemu/sysemu.h
In my "build everything" tree, changing sysemu/sysemu.h triggers a
recompile of some 5400 out of 6600 objects (not counting tests and
objects that don't depend on qemu/osdep.h).

Almost a third of its inclusions are actually superfluous.  Delete
them.  Downgrade two more to qapi/qapi-types-run-state.h, and move one
from char/serial.h to char/serial.c.

hw/semihosting/config.c, monitor/monitor.c, qdev-monitor.c, and
stubs/semihost.c define variables declared in sysemu/sysemu.h without
including it.  The compiler is cool with that, but include it anyway.

This doesn't reduce actual use much, as it's still included into
widely included headers.  The next commit will tackle that.

Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Message-Id: <20190812052359.30071-27-armbru@redhat.com>
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
2019-08-16 13:31:53 +02:00
Markus Armbruster 12e9493df9 Include hw/boards.h a bit less
hw/boards.h pulls in almost 60 headers.  The less we include it into
headers, the better.  As a first step, drop superfluous inclusions,
and downgrade some more to what's actually needed.  Gets rid of just
one inclusion into a header.

Cc: Eduardo Habkost <ehabkost@redhat.com>
Cc: Marcel Apfelbaum <marcel.apfelbaum@gmail.com>
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Message-Id: <20190812052359.30071-23-armbru@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Tested-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Reviewed-by: Eduardo Habkost <ehabkost@redhat.com>
2019-08-16 13:31:53 +02:00
Markus Armbruster a27bd6c779 Include hw/qdev-properties.h less
In my "build everything" tree, changing hw/qdev-properties.h triggers
a recompile of some 2700 out of 6600 objects (not counting tests and
objects that don't depend on qemu/osdep.h).

Many places including hw/qdev-properties.h (directly or via hw/qdev.h)
actually need only hw/qdev-core.h.  Include hw/qdev-core.h there
instead.

hw/qdev.h is actually pointless: all it does is include hw/qdev-core.h
and hw/qdev-properties.h, which in turn includes hw/qdev-core.h.
Replace the remaining uses of hw/qdev.h by hw/qdev-properties.h.

While there, delete a few superfluous inclusions of hw/qdev-core.h.

Touching hw/qdev-properties.h now recompiles some 1200 objects.

Cc: Paolo Bonzini <pbonzini@redhat.com>
Cc: "Daniel P. Berrangé" <berrange@redhat.com>
Cc: Eduardo Habkost <ehabkost@redhat.com>
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Eduardo Habkost <ehabkost@redhat.com>
Message-Id: <20190812052359.30071-22-armbru@redhat.com>
2019-08-16 13:31:53 +02:00
Markus Armbruster 650d103d3e Include hw/hw.h exactly where needed
In my "build everything" tree, changing hw/hw.h triggers a recompile
of some 2600 out of 6600 objects (not counting tests and objects that
don't depend on qemu/osdep.h).

The previous commits have left only the declaration of hw_error() in
hw/hw.h.  This permits dropping most of its inclusions.  Touching it
now recompiles less than 200 objects.

Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Message-Id: <20190812052359.30071-19-armbru@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Tested-by: Philippe Mathieu-Daudé <philmd@redhat.com>
2019-08-16 13:31:52 +02:00
Markus Armbruster d645427057 Include migration/vmstate.h less
In my "build everything" tree, changing migration/vmstate.h triggers a
recompile of some 2700 out of 6600 objects (not counting tests and
objects that don't depend on qemu/osdep.h).

hw/hw.h supposedly includes it for convenience.  Several other headers
include it just to get VMStateDescription.  The previous commit made
that unnecessary.

Include migration/vmstate.h only where it's still needed.  Touching it
now recompiles only some 1600 objects.

Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Message-Id: <20190812052359.30071-16-armbru@redhat.com>
Tested-by: Philippe Mathieu-Daudé <philmd@redhat.com>
2019-08-16 13:31:52 +02:00
Markus Armbruster ca77ee28e0 Include migration/qemu-file-types.h a lot less
In my "build everything" tree, changing migration/qemu-file-types.h
triggers a recompile of some 2600 out of 6600 objects (not counting
tests and objects that don't depend on qemu/osdep.h).

The culprit is again hw/hw.h, which supposedly includes it for
convenience.

Include migration/qemu-file-types.h only where it's needed.  Touching
it now recompiles less than 200 objects.

Signed-off-by: Markus Armbruster <armbru@redhat.com>
Message-Id: <20190812052359.30071-10-armbru@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Tested-by: Philippe Mathieu-Daudé <philmd@redhat.com>
2019-08-16 13:31:52 +02:00
Markus Armbruster 71e8a91585 Include sysemu/reset.h a lot less
In my "build everything" tree, changing sysemu/reset.h triggers a
recompile of some 2600 out of 6600 objects (not counting tests and
objects that don't depend on qemu/osdep.h).

The main culprit is hw/hw.h, which supposedly includes it for
convenience.

Include sysemu/reset.h only where it's needed.  Touching it now
recompiles less than 200 objects.

Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Tested-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Message-Id: <20190812052359.30071-9-armbru@redhat.com>
2019-08-16 13:31:52 +02:00
Cornelia Huck efac5ae420 s390x/pci: add some fallthrough annotations
According to the comment, the bits are supposed to accumulate.

Reported-by: Stefan Weil <sw@weilnetz.de>
Fixes: 5d1abf2344 ("s390x/pci: enforce zPCI state checking")
Acked-by: Collin Walling <walling@linux.ibm.com>
Signed-off-by: Cornelia Huck <cohuck@redhat.com>
2019-07-18 11:29:50 +02:00
Like Xu ae71ed8610 hw/s390x: Replace global smp variables with machine smp properties
The global smp variables in s390x are replaced with smp machine properties.

A local variable of the same name would be introduced in the declaration
phase if it's used widely in the context OR replace it on the spot if it's
only used once. No semantic changes.

Signed-off-by: Like Xu <like.xu@linux.intel.com>
Message-Id: <20190518205428.90532-7-like.xu@linux.intel.com>
Acked-by: Christian Borntraeger <borntraeger@de.ibm.com>
Reviewed-by: Cornelia Huck <cohuck@redhat.com>
[ehabkost: fix build failure at VCPU_IRQ_BUF_SIZE]
Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>

fixup! hw/s390x: Replace global smp variables with machine smp properties

Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
2019-07-05 17:08:03 -03:00
Like Xu a0628599fa machine: Refactor smp-related call chains to pass MachineState
To get rid of the global smp_* variables we're currently using, it's recommended
to pass MachineState in the list of incoming parameters for functions that use
global smp variables, thus some redundant parameters are dropped. It's applied
for legacy smbios_*(), *_machine_reset(), hot_add_cpu() and mips *_create_cpu().

Suggested-by: Igor Mammedov <imammedo@redhat.com>
Signed-off-by: Like Xu <like.xu@linux.intel.com>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Message-Id: <20190518205428.90532-3-like.xu@linux.intel.com>
Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
2019-07-05 17:07:36 -03:00
Peter Maydell 374f63f681 Monitor patches for 2019-07-02
-----BEGIN PGP SIGNATURE-----
 
 iQJGBAABCAAwFiEENUvIs9frKmtoZ05fOHC0AOuRhlMFAl0bQhUSHGFybWJydUBy
 ZWRoYXQuY29tAAoJEDhwtADrkYZTOgoP/3v1ZAg4ulTrUx/KO8C80sA3qqaPgkbP
 s8DFUwtjWcDrefGejIep4C0dxhY5vD1oNg9JeK+6O4IInijlg30kildBj85nPa5J
 Z55hZFIGWW1CSMzeSlOMWH1QdYdGPXkGRe8ApXPqRH4VpsdulC+vErQl1YrleNtv
 B8K8402hMOKL+TsheBpdnbM+1hXRj8zBGfobiY/9eLex30uaNDVOd3bIpx0M63fr
 kcwOOPKQeUTLPbUvI6mVQtTkNFCzk6Wmi5vMyT3bSe2ZMLNnEFQZXabcgSBverTK
 9ar5MxTMHIplstWVQEceXN3BLVlIsmunUsuCSHqmX6tdX37EKiJXZImiz0i98bnq
 5SFNAHntr3JDMdqqZJX+v1DvmGbPfv/H5poWk+wQfFBkjDykExEd77v9kuOc4aVZ
 HkEYNbAPVTjfm5xXxn8yXdY++tVsQKV4q2T4OX9WacMu5sJujDm9qIlVaE2A3Cdc
 ePM4tNrHJ0MNDHn2CG/wPEaLelfylLlL/Aai/WQe/YPVrVOHroT4zvwVv6+QJB2k
 MWqmRzGEOYDevPs8PizPetEHiirTHyrIufuleFJglBVSNi5V2LpG5d97Pal0Dn2k
 1ZzSnonXGnhx7VoaqbxhAEj8vAI42gJJ3Q/f6VW2q2rBAv4/oc9jeQVx1SYGFKCu
 QbNALrVpyv+5
 =jtpi
 -----END PGP SIGNATURE-----

Merge remote-tracking branch 'remotes/armbru/tags/pull-monitor-2019-07-02-v2' into staging

Monitor patches for 2019-07-02

# gpg: Signature made Tue 02 Jul 2019 12:37:57 BST
# gpg:                using RSA key 354BC8B3D7EB2A6B68674E5F3870B400EB918653
# gpg:                issuer "armbru@redhat.com"
# gpg: Good signature from "Markus Armbruster <armbru@redhat.com>" [full]
# gpg:                 aka "Markus Armbruster <armbru@pond.sub.org>" [full]
# Primary key fingerprint: 354B C8B3 D7EB 2A6B 6867  4E5F 3870 B400 EB91 8653

* remotes/armbru/tags/pull-monitor-2019-07-02-v2:
  dump: Move HMP command handlers to dump/
  MAINTAINERS: Add Windows dump to section "Dump"
  dump: Move the code to dump/
  qapi: Split dump.json off misc.json
  qapi: Rename target.json to misc-target.json
  qapi: Split machine-target.json off target.json and misc.json
  hw/core: Collect HMP command handlers in hw/core/
  hw/core: Collect QMP command handlers in hw/core/
  hw/core: Move numa.c to hw/core/
  qapi: Split machine.json off misc.json
  MAINTAINERS: Merge sections CPU, NUMA into Machine core
  qom: Move HMP command handlers to qom/
  qom: Move QMP command handlers to qom/
  qapi: Split qom.json and qdev.json off misc.json
  hmp: Move hmp.h to include/monitor/
  Makefile: Don't add monitor/ twice to common-obj-y
  MAINTAINERS: Make section "QOM" cover qdev as well
  MAINTAINERS: new maintainers for QOM

Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2019-07-03 00:16:43 +01:00
Markus Armbruster b0227cdb00 qapi: Rename target.json to misc-target.json
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Message-Id: <20190619201050.19040-14-armbru@redhat.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
2019-07-02 13:37:00 +02:00
Cornelia Huck 8fadea24de vfio-ccw: support async command subregion
A vfio-ccw device may provide an async command subregion for
issuing halt/clear subchannel requests. If it is present, use
it for sending halt/clear request to the device; if not, fall
back to emulation (as done today).

Reviewed-by: Farhan Ali <alifm@linux.ibm.com>
Message-Id: <20190613092542.2834-1-cohuck@redhat.com>
Reviewed-by: Eric Farman <farman@linux.ibm.com>
Signed-off-by: Cornelia Huck <cohuck@redhat.com>
2019-06-24 17:27:57 +02:00
Markus Armbruster a8d2532645 Include qemu-common.h exactly where needed
No header includes qemu-common.h after this commit, as prescribed by
qemu-common.h's file comment.

Signed-off-by: Markus Armbruster <armbru@redhat.com>
Message-Id: <20190523143508.25387-5-armbru@redhat.com>
[Rebased with conflicts resolved automatically, except for
include/hw/arm/xlnx-zynqmp.h hw/arm/nrf51_soc.c hw/arm/msf2-soc.c
block/qcow2-refcount.c block/qcow2-cluster.c block/qcow2-cache.c
target/arm/cpu.h target/lm32/cpu.h target/m68k/cpu.h target/mips/cpu.h
target/moxie/cpu.h target/nios2/cpu.h target/openrisc/cpu.h
target/riscv/cpu.h target/tilegx/cpu.h target/tricore/cpu.h
target/unicore32/cpu.h target/xtensa/cpu.h; bsd-user/main.c and
net/tap-bsd.c fixed up]
2019-06-12 13:20:20 +02:00
Markus Armbruster 0b8fa32f55 Include qemu/module.h where needed, drop it from qemu-common.h
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Message-Id: <20190523143508.25387-4-armbru@redhat.com>
[Rebased with conflicts resolved automatically, except for
hw/usb/dev-hub.c hw/misc/exynos4210_rng.c hw/misc/bcm2835_rng.c
hw/misc/aspeed_scu.c hw/display/virtio-vga.c hw/arm/stm32f205_soc.c;
ui/cocoa.m fixed up]
2019-06-12 13:18:33 +02:00
Markus Armbruster 856dfd8a03 qemu-common: Move qemu_isalnum() etc. to qemu/ctype.h
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Message-Id: <20190523143508.25387-3-armbru@redhat.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
2019-06-11 20:22:09 +02:00
Markus Armbruster 14a48c1d0d qemu-common: Move tcg_enabled() etc. to sysemu/tcg.h
Other accelerators have their own headers: sysemu/hax.h, sysemu/hvf.h,
sysemu/kvm.h, sysemu/whpx.h.  Only tcg_enabled() & friends sit in
qemu-common.h.  This necessitates inclusion of qemu-common.h into
headers, which is against the rules spelled out in qemu-common.h's
file comment.

Move tcg_enabled() & friends into their own header sysemu/tcg.h, and
adjust #include directives.

Cc: Richard Henderson <rth@twiddle.net>
Cc: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Message-Id: <20190523143508.25387-2-armbru@redhat.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
[Rebased with conflicts resolved automatically, except for
accel/tcg/tcg-all.c]
2019-06-11 20:22:09 +02:00
David Hildenbrand 08ef92d556 s390x: Bump the "qemu" CPU model up to a stripped-down z13
We don't care about the other two missing base features:
- S390_FEAT_DFP_PACKED_CONVERSION
- S390_FEAT_GROUP_GEN13_PTFF

Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: David Hildenbrand <david@redhat.com>
2019-06-07 14:53:26 +02:00
Philippe Mathieu-Daudé 5027da92c4 hw/s390x/event-facility: Use the QOM BUS() macro to access BusState.qbus
Rather than looking inside the definition of a BusState with "s->bus.qbus",
use the QOM prefered style: "BUS(&s->bus)".

This patch was generated using the following Coccinelle script:

    // Use BUS() macros to access BusState.qbus
    @use_bus_macro_to_access_qbus@
    expression obj;
    identifier bus;
    @@
    -&obj->bus.qbus
    +BUS(&obj->bus)

Suggested-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Reviewed-by: Cornelia Huck <cohuck@redhat.com>
Message-Id: <20190528164020.32250-5-philmd@redhat.com>
Signed-off-by: Laurent Vivier <laurent@vivier.eu>
2019-06-06 11:32:09 +02:00
Cornelia Huck 85fa94e169 s390/css: handle CCW_FLAG_SKIP
If a ccw has CCW_FLAG_SKIP set, and the command is of type
read, read backwards, or sense, no data should be written
to the guest for that command.

Reviewed-by: Eric Farman <farman@linux.ibm.com>
Message-Id: <20190516133327.11430-1-cohuck@redhat.com>
Signed-off-by: Cornelia Huck <cohuck@redhat.com>
2019-05-17 08:16:02 +02:00
Cornelia Huck 216bdd274a s390/ipl: cast to SCSIDevice directly
Coverity notes that the result of object_dynamic_cast() to
SCSIDevice is not checked in s390_gen_initial_iplp(); as
we know that we always have a SCSIDevice in that branch,
we can instead cast via SCSI_DEVICE directly.

Coverity: CID 1401098
Fixes: 44445d8668 ("s390 vfio-ccw: Add bootindex property and IPLB data")
Message-Id: <20190502155516.12415-1-cohuck@redhat.com>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Reviewed-by: Christian Borntraeger <borntraeger@de.ibm.com>
Signed-off-by: Cornelia Huck <cohuck@redhat.com>
2019-05-17 07:57:46 +02:00
Peter Maydell 06e6433955 Machine queue, 2019-04-25
* 4.1 machine-types (Cornelia Huck)
 * Support MAP_SYNC on pmem memory backends (Zhang Yi)
 * -cpu parsing fixes and cleanups (Eduardo Habkost)
 * machine initialization cleanups (Wei Yang, Markus Armbruster)
 -----BEGIN PGP SIGNATURE-----
 
 iQIcBAABCAAGBQJcwfRxAAoJECgHk2+YTcWmBegP/1alp8qiO/JdSkI/+jw9iUBC
 SviMwFrQVdKWT5ou/aYTM3apqrwC9XLUQ2vuNzLQDURG+SbcCf5BLvSrcvg9iR6z
 ASUot7ta1QtkR361dL0akhvqH8pNXpGolq5VleQqBOWAGUVjgrbWuwPlFVz9TZ8R
 LaVwDITv0fpQwtq+hB4b9hiDkebZFE4/xkNyxpaoJGzaePe1sCqACzNe1/PQ15ni
 gmd+VQ1qX3frUTSZcaWTrJIdQvZlkaD+pmEiwo969EE4U9ZGwwPRpShmeHnjuKDQ
 ufTGo05+/ikqp8refxA/XqyveHeJ69JSFNLCz2QwAgdwN/OXRG306Ln69vFNuX0D
 rfMJBvKZotc7enN08aQN1m1Sm0Y+2xo9RQgFUynZnzauQXKiEndLPHyjbbQ+pAPQ
 TmHrUQnmYSvoELewrCaq4XloXrd3X57U3K19ksqF+3meApQ7fuY9dQF2A2bE+aB7
 OhiMqdw9HVAjSzplKa5jPniSc5vgRCdr9AtX5B2RJdsQEv72JfwsOYB0DnrF4hyo
 NJz7HyS28xkbKrfbhztr8WoV8nPYvdS+xjSfim8YS6lFaNDnWZl2ybp/Trr1HItv
 TbDtPSx/IePHhIXd63aXkDt7FSoUib6+fCi8Wssuuo+MJMZfHacpWHkx2bVwSuf6
 doOaY/KY8mAq5DiM09zz
 =MNVq
 -----END PGP SIGNATURE-----

Merge remote-tracking branch 'remotes/ehabkost/tags/machine-next-pull-request' into staging

Machine queue, 2019-04-25

* 4.1 machine-types (Cornelia Huck)
* Support MAP_SYNC on pmem memory backends (Zhang Yi)
* -cpu parsing fixes and cleanups (Eduardo Habkost)
* machine initialization cleanups (Wei Yang, Markus Armbruster)

# gpg: Signature made Thu 25 Apr 2019 18:54:57 BST
# gpg:                using RSA key 2807936F984DC5A6
# gpg: Good signature from "Eduardo Habkost <ehabkost@redhat.com>" [full]
# Primary key fingerprint: 5A32 2FD5 ABC4 D3DB ACCF  D1AA 2807 936F 984D C5A6

* remotes/ehabkost/tags/machine-next-pull-request:
  util/mmap-alloc: support MAP_SYNC in qemu_ram_mmap()
  linux-headers: add linux/mman.h.
  scripts/update-linux-headers: add linux/mman.h
  util/mmap-alloc: Add a 'is_pmem' parameter to qemu_ram_mmap
  cpu: Fix crash with empty -cpu option
  cpu: Rename parse_cpu_model() to parse_cpu_option()
  vl: Simplify machine_parse()
  vl: Clean up after previous commit
  vl.c: allocate TYPE_MACHINE list once during bootup
  vl.c: make find_default_machine() local
  hw: add compat machines for 4.1

Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2019-04-26 14:30:18 +01:00
Cornelia Huck 9bf2650bc3 hw: add compat machines for 4.1
Add 4.1 machine types for arm/i440fx/q35/s390x/spapr.

Signed-off-by: Cornelia Huck <cohuck@redhat.com>
Message-Id: <20190411102025.22559-1-cohuck@redhat.com>
Acked-by: Greg Kurz <groug@kaod.org>
Acked-by: David Gibson <david@gibson.dropbear.id.au>
Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
2019-04-25 14:16:41 -03:00
Cornelia Huck 41c3d4269b Support for booting from a vfio-ccw passthrough dasd device
-----BEGIN PGP SIGNATURE-----
 Version: GnuPG v2.0.22 (GNU/Linux)
 
 iQIcBAABAgAGBQJcsHOvAAoJEC7Z13T+cC21IgoP/37yKOLOuagT4an9L573qWPp
 xCS48CJ4rNkpWXP3SHuTe+UHSp20sk+5b6rgM/VkLT2d301WS4gxF/VVu85ZFxGX
 tkqDwnljb87MqwTbH5Yj/U4mmq8tZkNg4CqmWuvJhWv4aFe6T/YtAzUkl7y7YCcT
 QfKqErl363JJKkL7cz+QWopFn5Gl/hy+mvEhbEtexWLIV1UNZ1i2hPWURfkh8FWH
 C1047CAfnC/rEJy0GcwkH4iCem8n4LWkMuf3Zehq+Yx+f2e8FfxMkoOtLJVCoKWj
 qoMidAplGqUxLoamZsbU1wEzwH6YH28X+uNUULsgDIIBuyW35ymbGsGTmKmNm6ED
 zVM1K7badvLeO3PXBxUkviZk7UFjxjXz3xCQMheY47wPoslfX+EN0xUvQ2gW2MvO
 Dhb9oPWsr/PFrMMJ35D2OOFH5kJC8Sj30YiP5lsnRoUBi4ecHCIUSlw6esKuYI+H
 JfDAYzxe6QqoGg5cxSNUXP+vAgU/FQq+nGNGHzHnsIR4Udt/JsAtNwxQ9DCbYR0C
 LA5qxZZTqkDtLPAHynqOzd8m7AoNaBSAgP2qp7Yp8ItXMyemlW2OIYR7yRxuL5bH
 zWO/deGYHp3+j9/Z0quzSUL5G85m0o1xgRJcJe9T2fYjWgsy271WFqaZg1JEvpI6
 zHcXEw71B7WQuAFaFO1+
 =tJvv
 -----END PGP SIGNATURE-----

Merge tag 's390-ccw-bios-2019-04-12' into s390-next-staging

Support for booting from a vfio-ccw passthrough dasd device

# gpg: Signature made Fri 12 Apr 2019 01:17:03 PM CEST
# gpg:                using RSA key 2ED9D774FE702DB5
# gpg: Good signature from "Thomas Huth <th.huth@gmx.de>" [full]
# gpg:                 aka "Thomas Huth <thuth@redhat.com>" [undefined]
# gpg:                 aka "Thomas Huth <huth@tuxfamily.org>" [undefined]
# gpg:                 aka "Thomas Huth <th.huth@posteo.de>" [unknown]

* tag 's390-ccw-bios-2019-04-12':
  pc-bios/s390: Update firmware images
  s390-bios: Use control unit type to find bootable devices
  s390-bios: Support booting from real dasd device
  s390-bios: Add channel command codes/structs needed for dasd-ipl
  s390-bios: Use control unit type to determine boot method
  s390-bios: Refactor virtio to run channel programs via cio
  s390-bios: Factor finding boot device out of virtio code path
  s390-bios: Extend find_dev() for non-virtio devices
  s390-bios: cio error handling
  s390-bios: Support for running format-0/1 channel programs
  s390-bios: ptr2u32 and u32toptr
  s390-bios: Map low core memory
  s390-bios: Decouple channel i/o logic from virtio
  s390-bios: Clean up cio.h
  s390-bios: decouple common boot logic from virtio
  s390-bios: decouple cio setup from virtio
  s390 vfio-ccw: Add bootindex property and IPLB data

Signed-off-by: Cornelia Huck <cohuck@redhat.com>
2019-04-25 14:09:20 +02:00
David Hildenbrand 905b7ee4d6 exec: Introduce qemu_maxrampagesize() and rename qemu_getrampagesize()
Rename qemu_getrampagesize() to qemu_minrampagesize(). While at it,
properly rename find_max_supported_pagesize() to
find_min_backend_pagesize().

s390x is actually interested into the maximum ram pagesize, so
introduce and use qemu_maxrampagesize().

Add a TODO, indicating that looking at any mapped memory backends is not
100% correct in some cases.

Signed-off-by: David Hildenbrand <david@redhat.com>
Message-Id: <20190417113143.5551-3-david@redhat.com>
Reviewed-by: David Gibson <david@gibson.dropbear.id.au>
Reviewed-by: Igor Mammedov <imammedo@redhat.com>
Signed-off-by: Cornelia Huck <cohuck@redhat.com>
2019-04-25 13:47:27 +02:00
David Hildenbrand 9138977b18 s390x/kvm: Configure page size after memory has actually been initialized
Right now we configure the pagesize quite early, when initializing KVM.
This is long before system memory is actually allocated via
memory_region_allocate_system_memory(), and therefore memory backends
marked as mapped.

Instead, let's configure the maximum page size after initializing
memory in s390_memory_init(). cap_hpage_1m is still properly
configured before creating any CPUs, and therefore before configuring
the CPU model and eventually enabling CMMA.

This is not a fix but rather a preparation for the future, when initial
memory might reside on memory backends (not the case for s390x right now)
We will replace qemu_getrampagesize() soon by a function that will always
return the maximum page size (not the minimum page size, which only
works by pure luck so far, as there are no memory backends).

Acked-by: Igor Mammedov <imammedo@redhat.com>
Reviewed-by: David Gibson <david@gibson.dropbear.id.au>
Signed-off-by: David Hildenbrand <david@redhat.com>
Message-Id: <20190417113143.5551-2-david@redhat.com>
Signed-off-by: Cornelia Huck <cohuck@redhat.com>
2019-04-25 13:47:01 +02:00
Jason J. Herne 44445d8668 s390 vfio-ccw: Add bootindex property and IPLB data
Add bootindex property and iplb data for vfio-ccw devices. This allows us to
forward boot information into the bios for vfio-ccw devices.

Refactor s390_get_ccw_device() to return device type. This prevents us from
having to use messy casting logic in several places.

Signed-off-by: Jason J. Herne <jjherne@linux.ibm.com>
Acked-by: Halil Pasic <pasic@linux.vnet.ibm.com>
Reviewed-by: Cornelia Huck <cohuck@redhat.com>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Message-Id: <1554388475-18329-2-git-send-email-jjherne@linux.ibm.com>
[thuth: fixed "typedef struct VFIOCCWDevice" build failure with clang]
Signed-off-by: Thomas Huth <thuth@redhat.com>
2019-04-12 12:39:52 +02:00
Daniel P. Berrangé 7357b22159 hw/s390x/3270-ccw: avoid taking address of fields in packed struct
Compiling with GCC 9 complains

hw/s390x/3270-ccw.c: In function ‘emulated_ccw_3270_cb’:
hw/s390x/3270-ccw.c:81:19: error: taking address of packed member of ‘struct SCHIB’ may result in an unaligned pointer value [-Werror=address-of-packed-member]
   81 |         SCSW *s = &sch->curr_status.scsw;
      |                   ^~~~~~~~~~~~~~~~~~~~~~

This local variable is only present to save a little bit of
typing when setting the field later. Get rid of this to avoid
the warning about unaligned accesses.

Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
Message-Id: <20190329111104.17223-15-berrange@redhat.com>
Reviewed-by: David Hildenbrand <david@redhat.com>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Signed-off-by: Cornelia Huck <cohuck@redhat.com>
2019-04-03 11:19:57 +02:00
Daniel P. Berrangé 5d45a33292 hw/s390x/ipl: avoid taking address of fields in packed struct
Compiling with GCC 9 complains

hw/s390x/ipl.c: In function ‘s390_ipl_set_boot_menu’:
hw/s390x/ipl.c:256:25: warning: taking address of packed member of ‘struct QemuIplParameters’ may result in an unaligned pointer value [-Waddress-of-packed-member]
  256 |     uint32_t *timeout = &ipl->qipl.boot_menu_timeout;
      |                         ^~~~~~~~~~~~~~~~~~~~~~~~~~~~

This local variable is only present to save a little bit of
typing when setting the field later. Get rid of this to avoid
the warning about unaligned accesses.

Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
Message-Id: <20190329111104.17223-14-berrange@redhat.com>
Reviewed-by: David Hildenbrand <david@redhat.com>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Reviewed-by: Farhan Ali <alifm@linux.ibm.com>
Signed-off-by: Cornelia Huck <cohuck@redhat.com>
2019-04-03 11:19:57 +02:00
Daniel P. Berrangé bea0279b72 hw/s390/css: avoid taking address members in packed structs
The GCC 9 compiler complains about many places in s390 code
that take the address of members of the 'struct SCHIB' which
is marked packed:

hw/s390x/css.c: In function ‘sch_handle_clear_func’:
hw/s390x/css.c:698:15: warning: taking address of packed member of ‘struct SCHIB’ may result in an unaligned pointer val\
ue [-Waddress-of-packed-member]
  698 |     PMCW *p = &sch->curr_status.pmcw;
      |               ^~~~~~~~~~~~~~~~~~~~~~
hw/s390x/css.c:699:15: warning: taking address of packed member of ‘struct SCHIB’ may result in an unaligned pointer val\
ue [-Waddress-of-packed-member]
  699 |     SCSW *s = &sch->curr_status.scsw;
      |               ^~~~~~~~~~~~~~~~~~~~~~

...snip many more...

Almost all of these are just done for convenience to avoid
typing out long variable/field names when referencing struct
members. We can get most of this convenience by taking the
address of the 'struct SCHIB' instead, avoiding triggering
the compiler warnings.

In a couple of places we copy via a local variable which is
a technique already applied elsewhere in s390 code for this
problem.

Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
Message-Id: <20190329111104.17223-13-berrange@redhat.com>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Reviewed-by: Halil Pasic <pasic@linux.ibm.com>
Signed-off-by: Cornelia Huck <cohuck@redhat.com>
2019-04-03 11:19:57 +02:00
Peter Maydell 84bdc58c06 * Kconfig improvements (msi_nonbroken, imply for default PCI devices)
* intel-iommu: sharing passthrough FlatViews (Peter)
 * Fix for SEV with VFIO (Brijesh)
 * Allow compilation without CONFIG_PARALLEL (Thomas)
 -----BEGIN PGP SIGNATURE-----
 
 iQFIBAABCAAyFiEE8TM4V0tmI4mGbHaCv/vSX3jHroMFAlyTvvAUHHBib256aW5p
 QHJlZGhhdC5jb20ACgkQv/vSX3jHroNNwwf/RrtjBoqu8Ulu6k+HJczdpkhO44c5
 R7sidGaOBHVjT+EsaYZxanXQlsbpDPiXCRoMRMln+O3Kgso/UlVTLBfctIjuf5kp
 P8Amp8rw843yl3TQ+Xaqat1qtfVVN2xjRDoyRwWrTU5w52MVVsan2j1/XzGX/7Bb
 Y3gXRxsN7MyjDCXxhxVwQCxKU2ue3ytvnfdCnu1SNZxZEaFAyGprTNCCTXYugehl
 bVauAs/0qOZWEyvElinNEz+zbqMTm07ULAWBRXgCDcOudsidZFtu0Xl62dXlp1Ou
 0zkaoGiOdMM6OXZkLd6vOK8mY9XDuqaUZE3zAeFMJsK1wSnZdGUVCJO1Hw==
 =Pkcj
 -----END PGP SIGNATURE-----

Merge remote-tracking branch 'remotes/bonzini/tags/for-upstream' into staging

* Kconfig improvements (msi_nonbroken, imply for default PCI devices)
* intel-iommu: sharing passthrough FlatViews (Peter)
* Fix for SEV with VFIO (Brijesh)
* Allow compilation without CONFIG_PARALLEL (Thomas)

# gpg: Signature made Thu 21 Mar 2019 16:42:24 GMT
# gpg:                using RSA key F13338574B662389866C7682BFFBD25F78C7AE83
# gpg:                issuer "pbonzini@redhat.com"
# gpg: Good signature from "Paolo Bonzini <bonzini@gnu.org>" [full]
# gpg:                 aka "Paolo Bonzini <pbonzini@redhat.com>" [full]
# Primary key fingerprint: 46F5 9FBD 57D6 12E7 BFD4  E2F7 7E15 100C CD36 69B1
#      Subkey fingerprint: F133 3857 4B66 2389 866C  7682 BFFB D25F 78C7 AE83

* remotes/bonzini/tags/for-upstream: (23 commits)
  virtio-vga: only enable for specific boards
  config-all-devices.mak: rebuild on reconfigure
  minikconf: fix parser typo
  intel-iommu: optimize nodmar memory regions
  test-announce-self: convert to qgraph
  hw/alpha/Kconfig: DP264 hardware requires e1000 network card
  hw/hppa/Kconfig: Dino board requires e1000 network card
  hw/sh4/Kconfig: r2d machine requires the rtl8139 network card
  hw/ppc/Kconfig: e500 based machines require virtio-net-pci device
  hw/ppc/Kconfig: Bamboo machine requires e1000 network card
  hw/mips/Kconfig: Fulong 2e board requires ati-vga/rtl8139 PCI devices
  hw/mips/Kconfig: Malta machine requires the pcnet network card
  hw/i386/Kconfig: enable devices that can be created by default
  hw/isa/Kconfig: PIIX4 southbridge requires USB UHCI
  hw/isa/Kconfig: i82378 SuperIO requires PC speaker device
  prep: do not select I82374
  hw/i386/Kconfig: PC uses I8257, not I82374
  hw/char/parallel: Make it possible to compile also without CONFIG_PARALLEL
  target/i386: sev: Do not pin the ram device memory region
  memory: Fix the memory region type assignment order
  ...

Signed-off-by: Peter Maydell <peter.maydell@linaro.org>

# Conflicts:
#	hw/rdma/Makefile.objs
#	hw/riscv/sifive_plic.c
2019-03-28 09:18:53 +00:00
Markus Armbruster 500016e5db trace-events: Shorten file names in comments
We spell out sub/dir/ in sub/dir/trace-events' comments pointing to
source files.  That's because when trace-events got split up, the
comments were moved verbatim.

Delete the sub/dir/ part from these comments.  Gets rid of several
misspellings.

Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Message-id: 20190314180929.27722-3-armbru@redhat.com
Message-Id: <20190314180929.27722-3-armbru@redhat.com>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
2019-03-22 16:18:07 +00:00
Paolo Bonzini ca9b7e29de kconfig: add CONFIG_MSI_NONBROKEN
Not all interrupt controllers have a working implementation of
message-signalled interrupts; in some cases, the guest may expect
MSI to work but it won't due to the buggy or lacking emulation.

In QEMU this is represented by the "msi_nonbroken" variable.  This
patch adds a new configuration symbol enabled whenever the binary
contains an interrupt controller that will set "msi_nonbroken".  We
can then use it to remove devices that cannot be possibly added
to the machine, because they require MSI.

Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2019-03-18 09:39:57 +01:00
Thomas Huth 9e5c2056d1 s390x: express dependencies with Kconfig
Instead of hard-coding all config switches in the config file
default-configs/s390x-softmmu.mak, let's use the new Kconfig files
to express the necessary dependencies: The S390_CCW_VIRTIO config switch
for the "s390-ccw-virtio" machine now selects all non-optional devices.

And since we already have the VIRTIO_PCI and VIRTIO_MMIO config switches
for the other two virtio transports, this patch also introduces a new
config switch VIRTIO_CCW for the third, s390x-specific virtio transport,
so that all three virtio transports are now handled in the same way.

Signed-off-by: Thomas Huth <thuth@redhat.com>
Acked-by: Cornelia Huck <cohuck@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2019-03-07 21:46:19 +01:00
Paolo Bonzini 82f5181777 kconfig: introduce kconfig files
The Kconfig files were generated mostly with this script:

  for i in `grep -ho CONFIG_[A-Z0-9_]* default-configs/* | sort -u`; do
    set fnord `git grep -lw $i -- 'hw/*/Makefile.objs' `
    shift
    if test $# = 1; then
      cat >> $(dirname $1)/Kconfig << EOF
config ${i#CONFIG_}
    bool

EOF
      git add $(dirname $1)/Kconfig
    else
      echo $i $*
    fi
  done
  sed -i '$d' hw/*/Kconfig
  for i in hw/*; do
    if test -d $i && ! test -f $i/Kconfig; then
      touch $i/Kconfig
      git add $i/Kconfig
    fi
  done

Whenever a symbol is referenced from multiple subdirectories, the
script prints the list of directories that reference the symbol.
These symbols have to be added manually to the Kconfig files.

Kconfig.host and hw/Kconfig were created manually.

Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Yang Zhong <yang.zhong@intel.com>
Message-Id: <20190123065618.3520-27-yang.zhong@intel.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2019-03-07 21:45:53 +01:00
David Hildenbrand 07578b0ad6 qdev: Let the hotplug_handler_unplug() caller delete the device
When unplugging a device, at one point the device will be destroyed
via object_unparent(). This will, one the one hand, unrealize the
removed device hierarchy, and on the other hand, destroy/free the
device hierarchy.

When chaining hotplug handlers, we want to overwrite a bus hotplug
handler by the machine hotplug handler, to be able to perform
some part of the plug/unplug and to forward the calls to the bus hotplug
handler.

For now, the bus hotplug handler would trigger an object_unparent(), not
allowing us to perform some unplug action on a device after we forwarded
the call to the bus hotplug handler. The device would be gone at that
point.

machine_unplug_handler(dev)
    /* eventually do unplug stuff */
    bus_unplug_handler(dev)
    /* dev is gone, we can't do more unplug stuff */

So move the object_unparent() to the original caller of the unplug. For
now, keep the unrealize() at the original places of the
object_unparent(). For implicitly chained hotplug handlers (e.g. pc
code calling acpi hotplug handlers), the object_unparent() has to be
done by the outermost caller. So when calling hotplug_handler_unplug()
from inside an unplug handler, nothing is to be done.

hotplug_handler_unplug(dev) -> calls machine_unplug_handler()
    machine_unplug_handler(dev) {
        /* eventually do unplug stuff */
        bus_unplug_handler(dev) -> calls unrealize(dev)
        /* we can do more unplug stuff but device already unrealized */
    }
object_unparent(dev)

In the long run, every unplug action should be factored out of the
unrealize() function into the unplug handler (especially for PCI). Then
we can get rid of the additonal unrealize() calls and object_unparent()
will properly unrealize the device hierarchy after the device has been
unplugged.

hotplug_handler_unplug(dev) -> calls machine_unplug_handler()
    machine_unplug_handler(dev) {
        /* eventually do unplug stuff */
        bus_unplug_handler(dev) -> only unplugs, does not unrealize
        /* we can do more unplug stuff */
    }
object_unparent(dev) -> will unrealize

The original approach was suggested by Igor Mammedov for the PCI
part, but I extended it to all hotplug handlers. I consider this one
step into the right direction.

To summarize:
- object_unparent() on synchronous unplugs is done by common code
-- "Caller of hotplug_handler_unplug"
- object_unparent() on asynchronous unplugs ("unplug requests") has to
  be done manually
-- "Caller of hotplug_handler_unplug"

Reviewed-by: Igor Mammedov <imammedo@redhat.com>
Acked-by: Cornelia Huck <cohuck@redhat.com>
Signed-off-by: David Hildenbrand <david@redhat.com>
Message-Id: <20190228122849.4296-2-david@redhat.com>
Reviewed-by: Greg Kurz <groug@kaod.org>
Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
2019-03-06 11:51:08 -03:00
Tony Krowiak 374b78e370 s390x/vfio-ap: Implement hot plug/unplug of vfio-ap device
Introduces hot plug/unplug support for the vfio-ap device.

To hot plug a vfio-ap device using the QEMU device_add command:

	(qemu) device_add vfio-ap,sysfsdev=$path-to-mdev

	Where $path-to-mdev is the absolute path to the mediated matrix device
	to which AP resources to be used by the guest have been assigned.

A vfio-ap device can be hot plugged only if:

1. A vfio-ap device has not been attached to the virtual machine's ap-bus
   via the QEMU command line or a prior hot plug action.

2. The guest was started with the CPU model feature for AP enabled
   (e.g., -cpu host,ap=on)

To hot unplug a vfio-ap device using the QEMU device_del command:

	(qemu) device_del vfio-ap,sysfsdev=$path-to-mdev

	Where $path-to-mdev is the absolute path to the mediated matrix device
	specified when the vfio-ap device was attached to the virtual machine's
	ap-bus.

A vfio-ap device can be hot unplugged only if:

1. A vfio-ap device has been attached to the virtual machine's ap-bus
   via the QEMU command line or a prior hot plug action.

2. The guest was started with the CPU model feature for AP enabled
   (e.g., -cpu host,ap=on)

Please note that a hot plug handler is not necessary for the vfio-ap device
because the AP matrix configuration for the guest is performed by the
kernel device driver when the vfio-ap device is realized. The vfio-ap device
represents a VFIO mediated device created in the host sysfs for use by a guest.
The mdev device is configured with an AP matrix (i.e., adapters and domains) via
its sysfs attribute interfaces prior to starting the guest or plugging a vfio-ap
device in. When the device is realized, a file descriptor is opened on the mdev
device which results in a callback to the vfio_ap kernel device driver. The
device driver then configures the AP matrix in the guest's SIE state description
from the AP matrix assigned via the mdev device's sysfs interfaces. The AP
devices will be created for the guest when the AP bus running on the guest
subsequently performs its periodic scan for AP devices.

The qdev_simple_device_unplug_cb() callback function is used for the same
reaons; namely, the vfio_ap kernel device driver will perform the AP resource
de-configuration for the guest when the vfio-ap device is unplugged. When the
vfio-ap device is unrealized, the mdev device file descriptor is closed which
results in a callback to the vfio_ap kernel device driver. The device driver
then clears the AP matrix configuration in the guest's SIE state description
and resets all of the affected queues. The AP devices created for the guest
will be removed when the AP bus running on the guest subsequently performs
its periodic scan and finds there are no longer any AP resources assigned to the
guest.

Signed-off-by: Tony Krowiak <akrowiak@linux.ibm.com>
Reviewed-by: Pierre Morel <pmorel@linux.ibm.com>
Reviewed-by: David Hildenbrand <david@redhat.com>
Reviewed-by: Halil Pasic <pasic@linux.ibm.com>
Tested-by: Pierre Morel <pmorel@linux.ibm.com>
Message-Id: <1550519397-25359-2-git-send-email-akrowiak@linux.ibm.com>
[CH: adapt to changed qbus_set_hotplug_handler() signature]
Signed-off-by: Cornelia Huck <cohuck@redhat.com>
2019-03-04 11:49:31 +01:00
Peter Maydell 2e68b86206 ppc patch queue 2019-02-19
Here's the next batch of ppc and spapr patches.  Higlights are:
 
  * A bunch of improvements to TCG handling of vector instructions from
    Richard Henderson and Marc Cave-Ayland
 
  * Cleanup to the XICS interrupt controller from Greg Kurz, removing
    the special KVM subclasses which were a bad idea
 
  * Some refinements to the XIVE interrupt controller from Cédric Le
    Goater
 
  * Fix from Fabiano Rosas for a really dumb buffer overflow in the
    device tree code for memory hotplug
 
  * Code for allowing access to SPRs from the gdb stub from Fabiano
    Rosas
 
  * Assorted minor fixes and cleanups
 -----BEGIN PGP SIGNATURE-----
 
 iQIzBAABCAAdFiEEdfRlhq5hpmzETofcbDjKyiDZs5IFAlxqt4oACgkQbDjKyiDZ
 s5KeaBAAzHortvO/rKiQ0hkhKdy9MtaBbuPIYwMYA5dQXYH2gOi/VZxXHBhwDczy
 MdXv+5Y+OYEWL0RC6kJGceM4xCD4b+WzZMriwYA5q32YeiUHmduyWxdq8Ulasm32
 xok5DheVjyJLS970Q8Qp1Ck7vRXfYVd/7R/hNExcKkYU3wczqVEDqglHyThxaP0s
 pTKrPGSuT+kHfi4kuLQ2qyKeNe6XWrvmgBAnXsud6lqWQ7D0ZAalnzhEoMrEMeyK
 ldjh/suB68WyJZ7Sl0REV2DlILLKc/wDSL4HMmjmyuV5ldEKVyqhM8f7tHMtzeET
 Ab8zKd0F4L1ffjyN3gmrh4WtyTa5L1s8av/bJFfESFNT3ioPFuDeMYQGQH4y3hJg
 nNGSJaWXRu/3c0/uRcA9SSxWQYSzKCz2WFEV06UK2JlajVd6Wy5zpjy/7spZhbQH
 z4TOSQrnRdIveRBTyUTUkJjbAitocUfHs2vCfzDBhACfj2LovSicNG284LlZXF1U
 /d6F668Z2aoDpdpgKh1QSOJ6bTS/1KwKCvZ89L15EUYOcCrZlZjECJR+WtGhTP7A
 YKyylvBkZ5a+M7t0f/Rm8KAy5QnpEAy7fKqLGQw8aldqX2MK46acjEwA5v696yZk
 iCyAas5gu0U6ytKMOYwT1Lq1hmID/fyBApXIeFJhz2KFzTb4PqM=
 =QQra
 -----END PGP SIGNATURE-----

Merge remote-tracking branch 'remotes/dgibson/tags/ppc-for-4.0-20190219' into staging

ppc patch queue 2019-02-19

Here's the next batch of ppc and spapr patches.  Higlights are:

 * A bunch of improvements to TCG handling of vector instructions from
   Richard Henderson and Marc Cave-Ayland

 * Cleanup to the XICS interrupt controller from Greg Kurz, removing
   the special KVM subclasses which were a bad idea

 * Some refinements to the XIVE interrupt controller from Cédric Le
   Goater

 * Fix from Fabiano Rosas for a really dumb buffer overflow in the
   device tree code for memory hotplug

 * Code for allowing access to SPRs from the gdb stub from Fabiano
   Rosas

 * Assorted minor fixes and cleanups

# gpg: Signature made Mon 18 Feb 2019 13:47:54 GMT
# gpg:                using RSA key 75F46586AE61A66CC44E87DC6C38CACA20D9B392
# gpg: Good signature from "David Gibson <david@gibson.dropbear.id.au>" [full]
# gpg:                 aka "David Gibson (Red Hat) <dgibson@redhat.com>" [full]
# gpg:                 aka "David Gibson (ozlabs.org) <dgibson@ozlabs.org>" [full]
# gpg:                 aka "David Gibson (kernel.org) <dwg@kernel.org>" [unknown]
# Primary key fingerprint: 75F4 6586 AE61 A66C C44E  87DC 6C38 CACA 20D9 B392

* remotes/dgibson/tags/ppc-for-4.0-20190219: (43 commits)
  target/ppc: convert vmin* and vmax* to vector operations
  target/ppc: convert vadd*s and vsub*s to vector operations
  target/ppc: Split out VSCR_SAT to a vector field
  target/ppc: Add set_vscr_sat
  target/ppc: Use mtvscr/mfvscr for vmstate
  target/ppc: Add helper_mfvscr
  target/ppc: Remove vscr_nj and vscr_sat
  target/ppc: Use helper_mtvscr for reset and gdb
  target/ppc: Pass integer to helper_mtvscr
  target/ppc: convert xxsel to vector operations
  target/ppc: convert xxspltw to vector operations
  target/ppc: convert xxspltib to vector operations
  target/ppc: convert VSX logical operations to vector operations
  target/ppc: convert vsplt[bhw] to use vector operations
  target/ppc: convert vspltis[bhw] to use vector operations
  target/ppc: convert vaddu[b,h,w,d] and vsubu[b,h,w,d] over to use vector operations
  target/ppc: convert VMX logical instructions to use vector operations
  xics: Drop the KVM ICS class
  spapr/irq: Use the "simple" ICS class for KVM
  xics: Handle KVM interrupt presentation from "simple" ICS code
  ...

Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2019-02-18 16:20:13 +00:00
Peter Maydell a0430dd8ab QAPI patches for 2019-02-18
-----BEGIN PGP SIGNATURE-----
 
 iQIcBAABAgAGBQJcara+AAoJEDhwtADrkYZTmU4P/jt4seb0EQZBl/+YpqdyT75m
 H8RvJWTbzh7mstSeJNbyeUG9P9hmNB7j9X9uVF978csnqnp9W8x8pK91SnG+hbcI
 H6nPh+/tBxTFLdBkxiTbtr7BD4aDVLsspfdD7eT1ZticSYubfNiSd7g0rgIlrR7M
 B/OPgE2vt9pKbMGcQoSjBiaui+qnuAnWcpJlHbzsPkaAS9x6U+5tkfA0YbuUgI7k
 9CR9HrzZGB2YU1E93CUIE0JntmnRF/RUK1OoiKwZu9nVlcUI5K08RdqMBUTM1m9P
 QouCEomzr63UXgSqSE0wCu5efwdluGOqbrDBqjzam6QOn5+Rqbn3krbbcXfY8Bub
 fVYMYbeLuGkXbX/Uvyj9YoZRJ8JLvAjkLecuWz27+wEHR3V0CjqoFLCmNYQt8T9R
 ti+jj9cWPt40kSoUPMF6QuboORBmTGITS/sy2akq6rMnXxsDeoN1SLdNdYC/4Rax
 S9j5mh0gR/YkrWwWO7Ydr7xSF9ciYFltPVEsgxVtZy/biGj52IjpjnGhTST+gJeB
 Icd65cs/vgoaN9gX+n0SKf0mna162aysw3DMT4hKO42iBVQ+P0c37j1xv80pXgdw
 THMJcOJFJ/PGUWpWHl/Q0wr5RkUqRpHcVp9NvssYOsbQgMA8YH+/2NV4yoJ7TIK5
 JLrDXbKvl18myezVKtz8
 =pNCA
 -----END PGP SIGNATURE-----

Merge remote-tracking branch 'remotes/armbru/tags/pull-qapi-2019-02-18' into staging

QAPI patches for 2019-02-18

# gpg: Signature made Mon 18 Feb 2019 13:44:30 GMT
# gpg:                using RSA key 3870B400EB918653
# gpg: Good signature from "Markus Armbruster <armbru@redhat.com>" [full]
# gpg:                 aka "Markus Armbruster <armbru@pond.sub.org>" [full]
# Primary key fingerprint: 354B C8B3 D7EB 2A6B 6867  4E5F 3870 B400 EB91 8653

* remotes/armbru/tags/pull-qapi-2019-02-18:
  qapi: move RTC_CHANGE to the target schema
  qmp: Deprecate query-events in favor of query-qmp-schema
  Revert "qapi-events: add 'if' condition to implicit event enum"
  qapi: remove qmp_unregister_command()
  qapi: make query-cpu-definitions depend on specific targets
  qapi: make query-cpu-model-expansion depend on s390 or x86
  qapi: make query-gic-capabilities depend on TARGET_ARM
  target.json: add a note about query-cpu* not being s390x-specific
  qapi: make s390 commands depend on TARGET_S390X
  qapi: make rtc-reset-reinjection and SEV depend on TARGET_I386
  qapi: New module target.json
  build: Deal with all of QAPI's .o in qapi/Makefile.objs
  build-sys: move qmp-introspect per target
  qapi: Generate QAPIEvent stuff into separate files
  qapi: Prepare for system modules other than 'builtin'
  qapi: Clean up modular built-in code generation a bit
  qapi: Fix up documentation for recent commit a95291007b
  qapi: Belatedly document modular code generation

Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2019-02-18 14:23:13 +00:00
Marc-André Lureau 0e2f4530c1 qapi: make s390 commands depend on TARGET_S390X
Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Acked-by: Cornelia Huck <cohuck@redhat.com>
Reviewed-by: Markus Armbruster <armbru@redhat.com>
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Message-Id: <20190214152251.2073-11-armbru@redhat.com>
2019-02-18 14:44:05 +01:00
Collin Walling 84176c7906 s390x/cpumodel: default enable mepoch for z14 and later
Latest systems and host kernels support mepoch, which is a
feature that was meant to be supported for z14 GA1 from the
get-go. Let's copy it to the z14 GA1 default CPU model.

Machines s390-ccw-virtio-3.1 and older will retain the old CPU
models and will not provide this bit nor the extended PTFF
functions in the default model.

Signed-off-by: Collin Walling <walling@linux.ibm.com>
Message-Id: <20190212011657.18324-2-walling@linux.ibm.com>
Reviewed-by: David Hildenbrand <david@redhat.com>
Signed-off-by: Cornelia Huck <cohuck@redhat.com>
2019-02-18 11:25:43 +01:00
David Hildenbrand d646b16b21 s390x: add zPCI feature to "qemu" CPU model
As we now always have PCI support, let's add it to the "qemu" CPU model,
taking care of backwards compatibility.

Signed-off-by: David Hildenbrand <david@redhat.com>
Message-Id: <20190212112323.15904-1-david@redhat.com>
Signed-off-by: Cornelia Huck <cohuck@redhat.com>
2019-02-18 11:25:43 +01:00
Cornelia Huck 09ced81aac s390x: always provide pci support
We tried to make pci support optional on s390x in the past;
unfortunately, we still require the s390 phb to be created
unconditionally due to backwards compatibility issues.

Instead of sinking more effort into this (including compat
handling for older machines etc.) for non-obvious gains, let's
just make CONFIG_PCI something that is always set on s390x.

Note that you can still fence off pci for the _guest_ if you
provide a cpu model without the zpci feature.

Message-Id: <20190211113255.3837-1-cohuck@redhat.com>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Reviewed-by: David Hildenbrand <david@redhat.com>
Acked-by: Christian Borntraeger <borntraeger@de.ibm.com>
Signed-off-by: Cornelia Huck <cohuck@redhat.com>
2019-02-18 11:25:43 +01:00