Jakub noticed[1] that, when using pin-based interrupts, the device will
unconditionally deasssert when any CQEs are acknowledged. However, the
pin should not be deasserted if other completion queues still holds
unacknowledged CQEs.
The bug is an artifact of commit ca247d3509 ("hw/block/nvme: fix
pin-based interrupt behavior") which fixed one bug but introduced
another. This is the third time someone tries to fix pin-based
interrupts (see commit 5e9aa92eb1 ("hw/block: Fix pin-based interrupt
behaviour of NVMe"))...
Third time's the charm, so fix it, again, by keeping track of how many
CQs have unacknowledged CQEs and only deassert when all are cleared.
[1]: <20210610114624.304681-1-jakub.jermar@kernkonzept.com>
Cc: qemu-stable@nongnu.org
Fixes: ca247d3509 ("hw/block/nvme: fix pin-based interrupt behavior")
Reported-by: Jakub Jermář <jakub.jermar@kernkonzept.com>
Signed-off-by: Klaus Jensen <k.jensen@samsung.com>
Reviewed-by: Keith Busch <kbusch@kernel.org>
Qiang Liu reported that an access on an unknown address is triggered in
memory_region_set_enabled because a check on CAP.PMRS is missing for the
PMRCTL register write when no PMR is configured.
Cc: qemu-stable@nongnu.org
Fixes: 75c3c9de96 ("hw/block/nvme: disable PMR at boot up")
Resolves: https://gitlab.com/qemu-project/qemu/-/issues/362
Signed-off-by: Klaus Jensen <k.jensen@samsung.com>
Reviewed-by: Keith Busch <kbusch@kernel.org>
In the documentation of the '-detached' param "be" and "not" has been
used side by side, fix that.
Signed-off-by: Gollu Appalanaidu <anaidu.gollu@samsung.com>
Reviewed-by: Klaus Jensen <k.jensen@samsung.com>
Signed-off-by: Klaus Jensen <k.jensen@samsung.com>
Add the controller identifiers list CNS 0x13, available list of ctrls
in NVM Subsystem that may or may not be attached to namespaces.
In Identify Ctrl List of the CNS 0x12 and 0x13 no endian conversion
for the nsid field.
These two CNS values shows affect when there exists a Subsystem.
Added condition if there is no Subsystem return invalid field in
command.
Signed-off-by: Gollu Appalanaidu <anaidu.gollu@samsung.com>
Reviewed-by: Klaus Jensen <k.jensen@samsung.com>
Signed-off-by: Klaus Jensen <k.jensen@samsung.com>
This partially reverts commit 98f84f5a4e.
Since all "multi aio" commands are now reimplemented to properly track
the nested aiocbs, we can revert the "hack" that was introduced to make
sure all requests we're properly drained upon sq deletion.
The revert is partial since we keep the assert that no outstanding
requests remain on the submission queue after the explicit cancellation.
Signed-off-by: Klaus Jensen <k.jensen@samsung.com>
Reviewed-by: Keith Busch <kbusch@kernel.org>
Prior to this patch, the aios associated with broadcast format are
submitted anonymously (no aiocb reference saved from the blk_aio call).
Fix this by formatting the namespaces one after another, saving a
reference to the aiocb for each.
Signed-off-by: Klaus Jensen <k.jensen@samsung.com>
Reviewed-by: Keith Busch <kbusch@kernel.org>
Prior to this patch, the aios associated with zone reset are submitted
anonymously (no reference saved to the aiocb from the blk_aio call).
Fix this by resetting the zones one after another, saving a reference to
the aiocb for each reset.
Signed-off-by: Klaus Jensen <k.jensen@samsung.com>
Reviewed-by: Keith Busch <kbusch@kernel.org>
Before this patch the code would issue several aios simultaneously
without saving a reference to the aiocb. Without the aiocb reference the
individual copies cannot be canceled.
Fix this by issuing copies of the ranges one after another.
Signed-off-by: Klaus Jensen <k.jensen@samsung.com>
Reviewed-by: Keith Busch <kbusch@kernel.org>
Some commands report additional useful information in dw0 and dw1 of the
completion queue entry.
Add them to the trace.
Signed-off-by: Klaus Jensen <k.jensen@samsung.com>
Reviewed-by: Keith Busch <kbusch@kernel.org>
The nvme_check_prinfo() and nvme_dif_check() functions operate on the
16 bit "control" member of the NvmeCmd. These functions do not otherwise
operate on an NvmeCmd or an NvmeRequest, so change them to expect the
actual 4 bit PRINFO field and add constants that work on this field as
well.
Signed-off-by: Klaus Jensen <k.jensen@samsung.com>
Reviewed-by: Keith Busch <kbusch@kernel.org>
Make nvme_get_zone_by_slba() return NULL if the slba is out of range.
This allows the function to be used without guarding the call with a
call to nvme_check_bounds(), in preparation for the next patch.
Add asserts after calling nvme_get_zone_by_slba() instead.
Signed-off-by: Klaus Jensen <k.jensen@samsung.com>
Reviewed-by: Keith Busch <kbusch@kernel.org>
Prepare nvme_dif_pract_generate_dif() and nvme_dif_check() to be
callable in smaller increments by making the reftag a pointer parameter
updated by the function.
Signed-off-by: Klaus Jensen <k.jensen@samsung.com>
Reviewed-by: Keith Busch <kbusch@kernel.org>
Prior to this patch, a loop was used to issue multiple "fire and forget"
aios for each range in the command. Without a reference to the aiocb
returned from the blk_aio_pdiscard calls, the aios cannot be canceled.
Fix this by processing the ranges one after another.
As a bonus, this fixes how metadata is cleared (i.e. we only zero it out
if the data was succesfully discarded).
Signed-off-by: Klaus Jensen <k.jensen@samsung.com>
Reviewed-by: Keith Busch <kbusch@kernel.org>
Pull the gist of nvme_check_dulbe() into a helper function. This is in
preparation for dsm refactoring.
Signed-off-by: Klaus Jensen <k.jensen@samsung.com>
Reviewed-by: Keith Busch <kbusch@kernel.org>
Prior to this patch, a broadcast flush would result in submitting
multiple "fire and forget" aios (no reference saved to the aiocbs
returned from the blk_aio_flush calls).
Fix this by issuing the flushes one after another.
Signed-off-by: Klaus Jensen <k.jensen@samsung.com>
Reviewed-by: Keith Busch <kbusch@kernel.org>
The EUI-64 field is the only identifier for NVMe namespaces in UEFI device
paths. Add a new namespace property "eui64", that provides the user the
option to specify the EUI-64.
Signed-off-by: Heinrich Schuchardt <xypron.glpk@gmx.de>
Acked-by: Klaus Jensen <k.jensen@samsung.com>
Reviewed-by: Klaus Jensen <k.jensen@samsung.com>
As per the TP 4056d Namespace types CNS 0x00 and CNS 0x11
CSI field shouldn't use but it is being used for these two
Identify command CNS values, fix that.
Remove 'nvme_csi_has_nvm_support()' helper as suggested by
Klaus we can safely assume NVM command set support for all
namespaces.
Suggested-by: Klaus Jensen <k.jensen@samsung.com>
Signed-off-by: Gollu Appalanaidu <anaidu.gollu@samsung.com>
Reviewed-by: Klaus Jensen <k.jensen@samsung.com>
Signed-off-by: Klaus Jensen <k.jensen@samsung.com>
In the Zoned Namespace Command Set Specification, chapter
2.5.1 Managing resources
"The controller may transition zones in the ZSIO:Implicitly Opened state
to the ZSC:Closed state for resource management purposes."
The word may in this sentence means that automatically transitioning
an implicitly opened zone to closed is completely optional.
Add a new parameter so that the user can control if this automatic
transitioning should be performed or not.
Being able to control this can help with verifying that e.g. a user-space
program behaves properly even without this optional ZNS feature.
The default value is set to true, in order to not change the existing
behavior.
Signed-off-by: Niklas Cassel <niklas.cassel@wdc.com>
[k.jensen: moved parameter to controller]
Signed-off-by: Klaus Jensen <k.jensen@samsung.com>
With the introduction of the nvme-subsystem device we are really
cluttering up the hw/block directory.
As suggested by Philippe previously, move the nvme emulation to hw/nvme.
Suggested-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Signed-off-by: Klaus Jensen <k.jensen@samsung.com>
Reviewed-by: Keith Busch <kbusch@kernel.org>
