This better explains what is this function about. Adjust all callers.
Cc: Alexander Graf <agraf@suse.de>
Cc: Andreas Färber <andreas.faerber@web.de>
Cc: David Gibson <david@gibson.dropbear.id.au>
Cc: Anthony Liguori <aliguori@us.ibm.com>
Acked-by: Richard Henderson <rth@twiddle.net>
Acked-by: Blue Swirl <blauwirbel@gmail.com>
Acked-by: Andreas Färber <andreas.faerber@web.de>
Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
The TCG jmp operation doesn't really make sense in the QEMU context, it
is unused, it is not implemented by some targets, and it is wrongly
implemented by some others.
This patch simply removes it.
Reviewed-by: Richard Henderson <rth@twiddle.net>
Acked-by: Blue Swirl <blauwirbel@gmail.com>
Acked-by: Stefan Weil<sw@weilnetz.de>
Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
Now that "and" with 0xff, 0xffff and 0xffffffff and "shr" with 0 shift
are optimized in tcg/tcg-op.h there is no need to do it in
target-xtensa/translate.c.
Acked-by: Max Filippov <jcmvbkbc@gmail.com>
Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
The entries for libhw* are no longer needed in .gitignore.
There is also no longer a difference between common-obj-y and
hw-obj-y, so one of those two macros is sufficient.
Signed-off-by: Stefan Weil <sw@weilnetz.de>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
Use the deposit op instead of and hardcoded bit field insertion. It
allows the host to emit the corresponding instruction if available.
Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Now that the movcond TCG op is available, it's possible to replace
shl and shr helpers by TCG code. The code generated by TCG is slightly
longer than the code generated by GCC for the helper but is still worth
it as this avoid all the consequences of using an helper: globals saved
back to memory, no possible optimization, call overhead, etc.
Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Now that the setcond TCG op is available, it's possible to replace
add_cc and sub_cc helpers by TCG code. The code generated by TCG is
actually very close to the one generated by GCC for the helper, and
this avoid all the consequences of using an helper: globals saved back
to memory, no possible optimization, call overhead, etc.
Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Use globals for CC flags instead of loading/storing them each they are
accessed. This allows some optimizations to be performed by the TCG
optimization passes.
Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reinstate the display of VFP registers in cpu_dump_state(), if
the CPU has them (this code had been #if 0'd out a for a long time).
We drop the attempt ot display the values as floating point, since
this makes assumptions about the host 'float' and 'double' formats
and is not done by eg the i386 cpu_dump_state().
This display is gated on the CPU_DUMP_FPU flag, as for x86.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Move the DUMP_FPU and DUMP_CCOP flags for cpu_dump_state() from being
x86-specific flags to being generic ones. This allows us to drop some
TARGET_I386 ifdefs in various places, and means that we can (potentially)
be more consistent across architectures about which monitor commands or
debug abort printouts include FPU register contents and info about
QEMU's condition-code optimisations.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
It is more readable, and all other code does it like that, too.
Signed-off-by: Stefan Weil <sw@weilnetz.de>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Stefan Hajnoczi <stefanha@gmail.com>
When the DeviceInfo code was removed, the comment describing
qdev_subclass_init() was left in the code by mistake. Remove it.
Cc: qemu-trivial@nongnu.org
Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
Signed-off-by: Stefan Hajnoczi <stefanha@gmail.com>
The current check will give a wrong result for gcc-5.x with x < 4.
Using QEMU_GNUC_PREREQ is simpler and fixes that issue.
Signed-off-by: Stefan Weil <sw@weilnetz.de>
Signed-off-by: Stefan Hajnoczi <stefanha@gmail.com>
It was missing for leon3 and mips_fulong2e.
Signed-off-by: Stefan Weil <sw@weilnetz.de>
Reviewed-by: Andreas Färber <afaerber@suse.de>
Signed-off-by: Stefan Hajnoczi <stefanha@gmail.com>
This patch cleans up return sentences in the end of void functions.
Reported-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Amos Kong <akong@redhat.com>
Signed-off-by: Stefan Hajnoczi <stefanha@gmail.com>
Implement the century byte in the RTC emulation, and test that it works.
This leads to some annoying compatibility code because we need to treat
a value of 2000 for the base_year property as "use the century byte
properly" (which would be a value of 0).
The century byte will now be always-zero, rather than always-20,
for the MIPS Magnum machine whose base_year is 1980. Commit 42fc73a
(Support epoch of 1980 in RTC emulation for MIPS Magnum, 2009-01-24)
correctly said:
With an epoch of 1980 and a year of 2009, one could argue that [the
century byte] should hold either 0, 1, 19 or 20. NT 3.50 on MIPS
does not read the century byte.
so I picked the simplest and most sensible implementation which is to
return 0 for 1980-2079, 1 for 2080-2179 and so on.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
QEMU's attempt to implement the century byte cover two possible places
for the byte. A common one on modern chipsets is 0x32, but QEMU also
stores the value in 0x37 (apparently for IBM PS/2 compatibility---it's
only been 25 years). To simplify the implementation of the century
byte, store it only at 0x32 but remap transparently 0x37 to 0x32 when
reading and writing from CMOS.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
When setting a date in 1980, Linux is actually disregarding the century
byte and setting the year to 2080. This causes a year-2038 overflow
in mktimegm. Fix this by doing the days-to-seconds computation in
64-bit math.
Reported-by: Lucas Meneghel Rodrigues <lookkas@gmail.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
It is quite difficult to debug qtest test cases without extra wrapper
scripts for QEMU or similar. This patch adds a simple environment
variable-based trigger that sends a STOP signal to the QEMU instance
under test, before attempting to connect to its QMP session.
This will block execution of the testcase and give time to attach a
debugger to the stopped QEMU process.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
The current check will give a wrong result for gcc-5.x with x < 4.
Using QEMU_GNUC_PREREQ is simpler and fixes that issue.
Signed-off-by: Stefan Weil <sw@weilnetz.de>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
Reword the section on strncpy: its NUL-filling is important
in some cases. Mention that pstrcpy's signature is different.
Signed-off-by: Jim Meyering <meyering@redhat.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
Adjust all uses s/strzcpy/strncpy/ and mark these uses
of strncpy as "ok".
Signed-off-by: Jim Meyering <meyering@redhat.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
Replace strncpy+NUL-terminate use with use of pstrcpy.
This requires linking with cutils.o (or else vssclient doesn't link),
so add that in the Makefile.
Acked-by: Alon Levy <alevy@redhat.com>
Signed-off-by: Jim Meyering <meyering@redhat.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
NUL-termination of the .ifr_name field is not required, but is fine
(and preferable to using strncpy and leaving the reader to wonder),
since the first thing the linux kernel does is to clear the last byte.
Besides, using pstrcpy here makes this setting of ifr_name consistent
with the other code (e.g., net/tap-linux.c) that does the same thing.
Reviewed-by: Luiz Capitulino <lcapitulino@redhat.com>
Signed-off-by: Jim Meyering <meyering@redhat.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
Don't use strncpy when the source string is known to fit
in the destination buffer. Use equivalent memcpy.
We could even use strcpy, here, but some static analyzers
warn about that, so don't add new uses.
Acked-by: David Gibson <david@gibson.dropbear.id.au>
Signed-off-by: Jim Meyering <meyering@redhat.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
In all of these cases, the uses of strncpy were unnecessary, since
at each point of use we know that the NUL-terminated source bytes
fit in the destination buffer. Use memcpy in place of strncpy.
Acked-by: Aneesh Kumar K.V <aneesh.kumar@linux.vnet.ibm.com>
Signed-off-by: Jim Meyering <meyering@redhat.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
In bt_hci_name_req a failed snprintf could return len larger than
sizeof(params.name), which means the following memset call would
have a "length" value of (size_t)-1, -2, etc... Sounds scary.
But currently, one can deduce that there is no problem:
strlen(slave->lmp_name) is guaranteed to be smaller than
CHANGE_LOCAL_NAME_CP_SIZE, which is the same as sizeof(params.name),
so this cannot happen. Regardless, there is no justification for
using snprintf+memset. Use pstrcpy instead.
Also, in bt_hci_event_complete_read_local_name, use pstrcpy in place
of unwarranted strncpy.
Signed-off-by: Jim Meyering <meyering@redhat.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
Don't bother with strncpy. There's no need for its zero-fill.
Use g_strndup in place of g_malloc+strncpy+NUL-terminate.
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Jim Meyering <meyering@redhat.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
Remove two uses of strdup (use g_path_get_basename instead),
and add a comment that this strncpy use is ok.
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Jim Meyering <meyering@redhat.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
A terminal NUL is required by caller's use of strchr.
It's better not to use strncpy at all, since there is no need
to zero out hundreds of trailing bytes for each iteration.
Signed-off-by: Jim Meyering <meyering@redhat.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
os_set_proc_name: Use pstrcpy, in place of strncpy and the
ineffectual preceding assignment: name[sizeof(name) - 1] = 0;
Signed-off-by: Jim Meyering <meyering@redhat.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
Actually do what the comment says, using pstrcpy NUL-terminate:
strncpy does not always do that.
Signed-off-by: Jim Meyering <meyering@redhat.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
v9fs_add_dir_node and qemu_v9fs_synth_add_file used strncpy
to form node->name, which requires NUL-termination, but
strncpy does not ensure NUL-termination.
Use pstrcpy, which does.
Acked-by: Aneesh Kumar K.V <aneesh.kumar@linux.vnet.ibm.com>
Signed-off-by: Jim Meyering <meyering@redhat.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
Avoid strncpy+manual-NUL-terminate. Use pstrcpy instead.
Acked-by: Kevin Wolf <kwolf@redhat.com>
Signed-off-by: Jim Meyering <meyering@redhat.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
* parse_vdiname: Use pstrcpy, not strncpy, when the destination
buffer must be NUL-terminated.
* sd_open: Likewise, avoid buffer overrun.
* do_sd_create: Likewise. Leave the preceding memset, since
pstrcpy does not NUL-fill, and filename needs that.
* sd_snapshot_create: Add a comment/question.
* find_vdi_name: Remove a useless memset.
* sd_snapshot_goto: Remove a useless memset.
Use pstrcpy to NUL-terminate, because find_vdi_name requires
that its vdi arg (filename parameter) be NUL-terminated.
It seems ok not to NUL-fill the buffer.
Do the same for snapid: remove useless memset-0 (instead,
zero tag[0]). Use pstrcpy, not strncpy.
* sd_snapshot_list: Use pstrcpy, not strncpy to write
into the ->name member. Each must be NUL-terminated.
Acked-by: Kevin Wolf <kwolf@redhat.com>
Acked-by: MORITA Kazutaka <morita.kazutaka@lab.ntt.co.jp>
Signed-off-by: Jim Meyering <meyering@redhat.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
Also, use PATH_MAX, rather than the arbitrary 1024.
Using PATH_MAX is more consistent with other filename-related
variables in this file, like backing_filename and tmp_filename.
Acked-by: Kevin Wolf <kwolf@redhat.com>
Signed-off-by: Jim Meyering <meyering@redhat.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
This avoids a NULL-deref upon strdup failure.
Also update matching free to g_free.
Signed-off-by: Jim Meyering <meyering@redhat.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
Use g_strdup rather than strdup, because the sole caller
(qdev_get_fw_dev_path_helper) assumes it gets non-NULL, and dereferences
it. Besides, in that caller, the allocated buffer is already freed with
g_free, so it's better to allocate with a matching g_strdup.
In one case, (scsi-bus.c) it was trivial, so I replaced an snprintf+
g_strdup combination with an equivalent g_strdup_printf use.
Signed-off-by: Jim Meyering <meyering@redhat.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
setsockopt needs a type cast for MinGW. That type cast is missing in
a recent commit which results in a compiler warning.
Like for other socket related functions which have the same problem,
we add a 'qemu_setsockopt' macro which provides that type cast where
needed and use the new macro to avoid the warning.
A 'qemu_getsockopt' is also added and can be used for future
modifications.
Signed-off-by: Stefan Weil <sw@weilnetz.de>
Signed-off-by: Stefan Hajnoczi <stefanha@gmail.com>
Use the recently introduced tcg_out_mov_reg() function rather than
the equivalent inline code.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Aurelien Jarno <aurelien@aurel32.net>
Signed-off-by: Stefan Hajnoczi <stefanha@gmail.com>
Contrary to its name, 'qemu_global_mutex' is only used locally
in cpus.c.
Signed-off-by: Stefan Weil <sw@weilnetz.de>
Signed-off-by: Stefan Hajnoczi <stefanha@gmail.com>
Specifying an empty target list with --target-list= is shorter
than specifying --disable-user --disable-system.
Both variants should give the same result: no targets at all.
This modification implements that feature.
It uses a trick which works with POSIX compliant shells to test whether
target_list is undefined (=> default targets) or empty (=> no targets).
Signed-off-by: Stefan Weil <sw@weilnetz.de>
Signed-off-by: Stefan Hajnoczi <stefanha@gmail.com>
Those functions return -errno in case of an error.
The old code would typically only detect EPERM (1) errors.
Signed-off-by: Stefan Weil <sw@weilnetz.de>
Signed-off-by: Stefan Hajnoczi <stefanha@gmail.com>
In the sregs API, upper and lower 32bit segments of the BAT registers
are swapped when doing a set. Since we need to support old kernels out
there, don't bother to fix it in the kernel, but instead work around
the problem in QEMU by swapping on put.
Signed-off-by: Alexander Graf <agraf@suse.de>
