Previously, the generated code in qapi-types.c initialized all
enum lookup tables first, prior to any other definitions. But
there are no topological sorting requirements that mandate this
layout, so we can drop the QAPISchemaGenTypeVisitor._fwdefn
field and just generate all definitions in visitation order.
The generated code shows some churn due to reordering, but it
is still fairly straightforward to follow (all the deletions
occur in one hunk, and all the deleted lines are re-inserted
in the same order later in the same files, just spread across
multiple insertion points).
Suggested-by: Markus Armbruster <armbru@redhat.com>
Signed-off-by: Eric Blake <eblake@redhat.com>
Message-Id: <1449033659-25497-6-git-send-email-eblake@redhat.com>
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Previously, working with alternates required two lookup arrays
and some indirection: for type Foo, we created Foo_qtypes[]
which maps each qtype to a value of the generated FooKind enum,
then look up that value in FooKind_lookup[] like we do for other
union types.
This has a couple of subtle bugs. First, the generator was
creating a call with a parameter '(int *) &(*obj)->type' where
type is an enum type; this is unsafe if the compiler chooses
to store the enum type in a different size than int, where
assigning through the wrong size pointer can corrupt data or
cause a SIGBUS.
Related bug, not not fixed in this patch: qapi-visit.py's
gen_visit_enum() generates a cast of its enum * argument to
int *. Marked FIXME.
Second, since the values of the FooKind enum start at zero, all
entries of the Foo_qtypes[] array that were not explicitly
initialized will map to the same branch of the union as the
first member of the alternate, rather than triggering a desired
failure in visit_get_next_type(). Fortunately, the bug seldom
bites; the very next thing the input visitor does is try to
parse the incoming JSON with the wrong parser, which normally
fails; the output visitor is not used with a C struct in that
state, and the dealloc visitor has nothing to clean up (so
there is no leak).
However, the second bug IS observable in one case: parsing an
integer causes unusual behavior in an alternate that contains
at least a 'number' member but no 'int' member, because the
'number' parser accepts QTYPE_QINT in addition to the expected
QTYPE_QFLOAT (that is, since 'int' is not a member, the type
QTYPE_QINT accidentally maps to FooKind 0; if this enum value
is the 'number' branch the integer parses successfully, but if
the 'number' branch is not first, some other branch tries to
parse the integer and rejects it). A later patch will worry
about fixing alternates to always parse all inputs that a
non-alternate 'number' would accept, for now this is still
marked FIXME in the updated test-qmp-input-visitor.c, to
merely point out that new undesired behavior of 'ans' matches
the existing undesired behavior of 'asn'.
This patch fixes the default-initialization bug by deleting the
indirection, and modifying get_next_type() to directly assign a
QTypeCode parameter. This in turn fixes the type-casting bug,
as we are no longer casting a pointer to enum to a questionable
size. There is no longer a need to generate an implicit FooKind
enum associated with the alternate type (since the QMP wire
format never uses the stringized counterparts of the C union
member names). Since the updated visit_get_next_type() does not
know which qtypes are expected, the generated visitor is
modified to generate an error statement if an unexpected type is
encountered.
Callers now have to know the QTYPE_* mapping when looking at the
discriminator; but so far, only the testsuite was even using the
C struct of an alternate types. I considered the possibility of
keeping the internal enum FooKind, but initialized differently
than most generated arrays, as in:
typedef enum FooKind {
FOO_KIND_A = QTYPE_QDICT,
FOO_KIND_B = QTYPE_QINT,
} FooKind;
to create nicer aliases for knowing when to use foo->a or foo->b
when inspecting foo->type; but it turned out to add too much
complexity, especially without a client.
There is a user-visible side effect to this change, but I
consider it to be an improvement. Previously,
the invalid QMP command:
{"execute":"blockdev-add", "arguments":{"options":
{"driver":"raw", "id":"a", "file":true}}}
failed with:
{"error": {"class": "GenericError",
"desc": "Invalid parameter type for 'file', expected: QDict"}}
(visit_get_next_type() succeeded, and the error comes from the
visit_type_BlockdevOptions() expecting {}; there is no mention of
the fact that a string would also work). Now it fails with:
{"error": {"class": "GenericError",
"desc": "Invalid parameter type for 'file', expected: BlockdevRef"}}
(the error when the next type doesn't match any expected types for
the overall alternate).
Signed-off-by: Eric Blake <eblake@redhat.com>
Message-Id: <1449033659-25497-5-git-send-email-eblake@redhat.com>
Signed-off-by: Markus Armbruster <armbru@redhat.com>
What's more meta than using qapi to define qapi? :)
Convert QType into a full-fledged[*] builtin qapi enum type, so
that a subsequent patch can then use it as the discriminator
type of qapi alternate types. Fortunately, the judicious use of
'prefix' in the qapi definition avoids churn to the spelling of
the enum constants.
To avoid circular definitions, we have to flip the order of
inclusion between "qobject.h" vs. "qapi-types.h". Back in commit
28770e0, we had the latter include the former, so that we could
use 'QObject *' for our implementation of 'any'. But that usage
also works with only a forward declaration, whereas the
definition of QObject requires QType to be a complete type.
[*] The type has to be builtin, rather than declared in
qapi/common.json, because we want to use it for alternates even
when common.json is not included. But since it is the first
builtin enum type, we have to add special cases to qapi-types
and qapi-visit to only emit definitions once, even when two
qapi files are being compiled into the same binary (the way we
already handled builtin list types like 'intList'). We may
need to revisit how multiple qapi files share common types,
but that's a project for another day.
Signed-off-by: Eric Blake <eblake@redhat.com>
Message-Id: <1449033659-25497-4-git-send-email-eblake@redhat.com>
Signed-off-by: Markus Armbruster <armbru@redhat.com>
The name QType matches our CODING_STYLE conventions for type names
in CamelCase. It also matches the fact that we are already naming
all the enum members with a prefix of QTYPE, not QTYPE_CODE. And
doing the rename will also make it easier for the next patch to use
QAPI for providing the enum, which also wants CamelCase type names.
Signed-off-by: Eric Blake <eblake@redhat.com>
Message-Id: <1449033659-25497-3-git-send-email-eblake@redhat.com>
Signed-off-by: Markus Armbruster <armbru@redhat.com>
The QObject hierarchy is small enough, and unlikely to grow further
(since we only use it to map to JSON and already cover all JSON
types), that we can simplify things by not tracking a separate
vtable, but just inline the code element of the vtable QType
directly into QObject (renamed to type), and track a separate array
of destroy functions. We can drop qnull_destroy_obj() in the
process.
The remaining QObject subclasses must export their destructor.
This also has the nice benefit of moving the typename 'QType'
out of the way, so that the next patch can repurpose it for a
nicer name for 'qtype_code'.
The various objects are still the same size (so no change in cache
line pressure), but now have less indirection (although I didn't
bother benchmarking to see if there is a noticeable speedup, as
we don't have hard evidence that this was in a performance hotspot
in the first place).
A future patch could drop the refcnt size to 32 bits for a smaller
struct on 64-bit architectures, if desired (we have limits on the
largest JSON that we are willing to parse, and will probably never
need to take full advantage of a 64-bit refcnt).
Suggested-by: Markus Armbruster <armbru@redhat.com>
Signed-off-by: Eric Blake <eblake@redhat.com>
Message-Id: <1449033659-25497-2-git-send-email-eblake@redhat.com>
Signed-off-by: Markus Armbruster <armbru@redhat.com>
When munging enum values, the fact that we were passing the entire
prefix + value through camel_to_upper() meant that enum values
spelled with CamelCase could be turned into CAMEL_CASE. However,
this provides a potential collision (both OneTwo and One-Two would
munge into ONE_TWO) for enum types, when the same two names are
valid side-by-side as QAPI member names. By changing the generation
of enum constants to always be prefix + '_' + c_name(value,
False).upper(), and ensuring that there are no case collisions (in
the next patches), we no longer have to worry about names that
would be distinct as QAPI members but collide as variant tag names,
without having to think about what munging the heuristics in
camel_to_upper() will actually perform on an enum value.
Making the change will affect enums that did not follow coding
conventions, using 'CamelCase' rather than desired 'lower-case'.
Thankfully, there are only two culprits: InputButton and ErrorClass.
We already tweaked ErrorClass to make it an alias of QapiErrorClass,
where only the alias needs changing rather than the whole tree. So
the bulk of this change is modifying INPUT_BUTTON_WHEEL_UP to the
new INPUT_BUTTON_WHEELUP (and likewise for WHEELDOWN). That part
of this commit may later need reverting if we rename the enum
constants from 'WheelUp' to 'wheel-up' as part of moving
x-input-send-event to a stable interface; but at least we have
documentation bread crumbs in place to remind us (commit 513e7cd),
and it matches the fact that SDL constants are also spelled
SDL_BUTTON_WHEELUP.
Suggested by: Markus Armbruster <armbru@redhat.com>
Signed-off-by: Eric Blake <eblake@redhat.com>
Message-Id: <1447836791-369-27-git-send-email-eblake@redhat.com>
[Commit message tweaked]
Signed-off-by: Markus Armbruster <armbru@redhat.com>
The qapi enum ErrorClass is unusual that it uses 'CamelCase' names,
contrary to our documented convention of preferring 'lower-case'.
However, this enum is entrenched in the API; we cannot change
what strings QMP outputs. Meanwhile, we want to simplify how
c_enum_const() is used to generate enum constants, by moving away
from the heuristics of camel_to_upper() to a more straightforward
c_name(N).upper() - but doing so will rename all of the ErrorClass
constants and cause churn to all client files, where the new names
are aesthetically less pleasing (ERROR_CLASS_DEVICENOTFOUND looks
like we can't make up our minds on whether to break between words).
So as always in computer science, solve the problem by some more
indirection: rename the qapi type to QapiErrorClass, and add a
new enum ErrorClass in error.h whose members are aliases of the
qapi type, but with the spelling expected elsewhere in the tree.
Then, when c_enum_const() changes the munging, we only have to
adjust the one alias spot.
Suggested by: Markus Armbruster <armbru@redhat.com>
Signed-off-by: Eric Blake <eblake@redhat.com>
Message-Id: <1447836791-369-26-git-send-email-eblake@redhat.com>
Signed-off-by: Markus Armbruster <armbru@redhat.com>
The CpuInfo struct is used only by the 'query-cpus' output
command, so we are free to modify it by adding fields (clients
are already supposed to ignore unknown output fields), or by
changing optional members to mandatory, while still keeping
QMP wire compatibility with older versions of qemu.
When qapi type CpuInfo was originally created for 0.14, we had
no notion of a flat union, and instead just listed a bunch of
optional fields with documentation about the mutually-exclusive
choice of which instruction pointer field(s) would be provided
for a given architecture. But now that we have flat unions and
introspection, it is better to segregate off which fields will
be provided according to the actual architecture. With this in
place, we no longer need the fields to be optional, because the
choice of the new 'arch' discriminator serves that role.
This has an additional benefit: the old all-in-one struct was
the only place in the code base that had a case-sensitive
naming of members 'pc' vs. 'PC'. Separating these spellings
into different branches of the flat union will allow us to add
restrictions against future case-insensitive collisions, since
that is generally a poor interface practice.
Signed-off-by: Eric Blake <eblake@redhat.com>
Message-Id: <1447836791-369-25-git-send-email-eblake@redhat.com>
[Spelling of CPUInfo{SPARC,PPC,MIPS} fixed]
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Now that we no longer collide with an implicit _MAX enum member,
we no longer need to reject it in the ad hoc parser, and can
remove several tests that are no longer needed.
Signed-off-by: Eric Blake <eblake@redhat.com>
Message-Id: <1447836791-369-24-git-send-email-eblake@redhat.com>
[Commit message tweaked]
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Now that we guarantee the user doesn't have any enum values
beginning with a single underscore, we can use that for our
own purposes. Renaming ENUM_MAX to ENUM__MAX makes it obvious
that the sentinel is generated.
This patch was mostly generated by applying a temporary patch:
|diff --git a/scripts/qapi.py b/scripts/qapi.py
|index e6d014b..b862ec9 100644
|--- a/scripts/qapi.py
|+++ b/scripts/qapi.py
|@@ -1570,6 +1570,7 @@ const char *const %(c_name)s_lookup[] = {
| max_index = c_enum_const(name, 'MAX', prefix)
| ret += mcgen('''
| [%(max_index)s] = NULL,
|+// %(max_index)s
| };
| ''',
| max_index=max_index)
then running:
$ cat qapi-{types,event}.c tests/test-qapi-types.c |
sed -n 's,^// \(.*\)MAX,s|\1MAX|\1_MAX|g,p' > list
$ git grep -l _MAX | xargs sed -i -f list
The only things not generated are the changes in scripts/qapi.py.
Rejecting enum members named 'MAX' is now useless, and will be dropped
in the next patch.
Signed-off-by: Eric Blake <eblake@redhat.com>
Message-Id: <1447836791-369-23-git-send-email-eblake@redhat.com>
Reviewed-by: Juan Quintela <quintela@redhat.com>
[Rebased to current master, commit message tweaked]
Signed-off-by: Markus Armbruster <armbru@redhat.com>
We already documented that qapi names should match specific
patterns (such as starting with a letter unless it was an enum
value or a downstream extension). Tighten that from a suggestion
into a hard requirement, which frees up names beginning with a
single underscore for qapi internal usage.
The tighter regex doesn't forbid everything insane that a user
could provide (for example, a user could name a type 'Foo-lookup'
to collide with the generated 'Foo_lookup[]' for an enum 'Foo'),
but does a good job at protecting the most obvious uses, and
also happens to reserve single leading underscore for later use.
The handling of enum values starting with a digit is tricky:
commit 9fb081e introduced a subtle bug by using c_name() on
a munged value, which would allow an enum to include the
member 'q-int' in spite of our reservation. Furthermore,
munging with a leading '_' would fail our tighter regex. So
fix it by only munging for leading digits (which are never
ticklish in c_name()) and by using a different prefix (I
picked 'D', although any letter should do).
Add new tests, reserved-member-underscore and reserved-enum-q,
to demonstrate the tighter checking.
Signed-off-by: Eric Blake <eblake@redhat.com>
Message-Id: <1447836791-369-22-git-send-email-eblake@redhat.com>
Message-Id: <1447883135-18020-1-git-send-email-eblake@redhat.com>
[Eric's fixup squashed in]
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Our qapi conventions document that '.' should only be used in
the prefix of downstream names. BlkdebugEvent was a lone
exception to this. Changing this is not backwards compatible
to the 'blockdev-add' QMP command; however, that command is
not yet fully stable. It can also be argued that the testsuite
is the biggest user of blkdebug, and that any other user can
be taught to deal with the change by paying attention to
introspection results.
Done with:
$ for str in \
l1_grow.{alloc,write,activate}_table \
l2_alloc.{cow_read,write} \
refblock_alloc.{hookup,write,write_blocks,write_table,switch_table} \
pwritev_rmw.{head,after_head,tail,after_tail}; do
str1=$(echo "$str" | sed 's/\./\\./')
str2=$(echo "$str" | sed 's/\./_/')
git grep -l "$str1" | xargs -r sed -i "s/$str1/$str2/g"
done
followed by a manual touchup to test 77 to keep the test working.
Reported-by: Markus Armbruster <armbru@redhat.com>
CC: Kevin Wolf <kwolf@redhat.com>
Signed-off-by: Eric Blake <eblake@redhat.com>
Message-Id: <1447836791-369-21-git-send-email-eblake@redhat.com>
Signed-off-by: Markus Armbruster <armbru@redhat.com>
No need to keep two separate enums, where editing one is likely
to forget the other. Now that we can specify a qapi enum prefix,
we don't even have to change the bulk of the uses.
get_event_by_name() could perhaps be replaced by qapi_enum_parse(),
but I left that for another day.
CC: Kevin Wolf <kwolf@redhat.com>
Signed-off-by: Eric Blake <eblake@redhat.com>
Message-Id: <1447836791-369-20-git-send-email-eblake@redhat.com>
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Commit cbc95538 removed unused start_handle() and end_handle(),
but forgot to remove their declarations.
Signed-off-by: Eric Blake <eblake@redhat.com>
Message-Id: <1447836791-369-19-git-send-email-eblake@redhat.com>
Signed-off-by: Markus Armbruster <armbru@redhat.com>
The method c_name() is supposed to do two different actions: munge
'-' into '_', and add a 'q_' prefix to ticklish names. But it did
these steps out of order, making it possible to submit input that
is not ticklish until after munging, where the output then lacked
the desired prefix.
The failure is exposed easily if you have a compiler that recognizes
C11 keywords, and try to name a member '_Thread-local', as it would
result in trying to compile the declaration 'uint64_t _Thread_local;'
which is not valid. However, this name violates our conventions
(ultimately, want to enforce that no qapi names start with single
underscore), so the test is slightly weaker by instead testing
'wchar-t'; the declaration 'uint64_t wchar_t;' is valid in C (where
wchar_t is only a typedef) but would fail with a C++ compiler (where
it is a keyword).
Fix things by reversing the order of actions within c_name().
Signed-off-by: Eric Blake <eblake@redhat.com>
Message-Id: <1447836791-369-18-git-send-email-eblake@redhat.com>
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Detect attempts to declare two object members that would result
in the same C member name, by keying the 'seen' dictionary off
of the C name rather than the qapi name. It also requires passing
info through the check_clash() methods.
This addresses a TODO and fixes the previously-broken
args-name-clash test. The resulting error message demonstrates
the utility of the .describe() method added previously. No change
to generated code.
Signed-off-by: Eric Blake <eblake@redhat.com>
Message-Id: <1447836791-369-17-git-send-email-eblake@redhat.com>
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Future commits will migrate semantic checking away from parsing
and over to the various QAPISchema*.check() methods. But to
report an error message about an incorrect semantic use of a
member of an object type, it helps to know which type, command,
or event owns the member. In particular, when a member is
inherited from a base type, it is desirable to associate the
member name with the base type (and not the type calling
member.check()).
Rather than packing additional information into the seen array
passed to each member.check() (as in seen[m.name] = {'member':m,
'owner':type}), it is easier to have each member track the name
of the owner type in the first place (keeping things simpler
with the existing seen[m.name] = m). The new member.owner field
is set via a new set_owner() method, called when registering
the members and variants arrays with an object or variant type.
Track only a name, and not the actual type object, to avoid
creating a circular python reference chain.
Note that Variants.set_owner() method does not set the owner
for the tag_member field; this field is set earlier either as
part of an object's non-variant members, or explicitly by
alternates.
The source information is intended for human consumption in
error messages, and a new describe() method is added to access
the resulting information. For example, given the qapi:
{ 'command': 'foo', 'data': { 'string': 'str' } }
an implementation of visit_command() that calls
arg_type.members[0].describe()
will see "'string' (parameter of foo)".
To make the human-readable name of implicit types work without
duplicating efforts, the describe() method has to reverse the
name of implicit types, via the helper _pretty_owner().
No change to generated code.
Signed-off-by: Eric Blake <eblake@redhat.com>
Message-Id: <1447836791-369-16-git-send-email-eblake@redhat.com>
[Incorrect & unused -wrapper case in _pretty_owner() dropped]
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Now that branches are in a separate C namespace, we can remove
the restrictions in the parser that claim a branch name would
collide with QMP, and delete the negative tests that are no
longer problematic. A separate patch can then add positive
tests to qapi-schema-test to test that any corner cases will
compile correctly.
This reverts the scripts/qapi.py portion of commit 7b2a5c2,
now that the assertions that it plugged are no longer possible.
Signed-off-by: Eric Blake <eblake@redhat.com>
Message-Id: <1447836791-369-15-git-send-email-eblake@redhat.com>
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Checking that a given QAPISchemaObjectTypeVariant.name is a
member of the corresponding QAPISchemaEnumType of the owning
QAPISchemaObjectTypeVariants.tag_member ensures that there are
no collisions in the generated C union for those tag values
(since the enum itself should have no collisions).
However, ever since its introduction in f51d8c3d, this was the
only additional action of of Variant.check(), beyond calling
the superclass Member.check(). This forces a difference in
.check() signatures, just to pass the enum type down.
Simplify things by instead doing the tag name check as part of
Variants.check(), at which point we can rely on inheritance
instead of overriding Variant.check().
Signed-off-by: Eric Blake <eblake@redhat.com>
Message-Id: <1447836791-369-14-git-send-email-eblake@redhat.com>
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Consolidate two common sequences of clash detection into a
new QAPISchemaObjectType.check_clash() helper method.
No change to generated code.
Signed-off-by: Eric Blake <eblake@redhat.com>
Message-Id: <1447836791-369-13-git-send-email-eblake@redhat.com>
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Right now, our ad hoc parser ensures that we cannot have a
flat union that introduces any members that would clash with
non-variant members inherited from the union's base type (see
flat-union-clash-member.json). We want QAPISchemaObjectType.check()
to make the same check, so we can later reduce some of the ad
hoc checks.
We already have a map 'seen' of all non-variant members. We
still need to check for collisions between each variant type's
members and the non-variant ones.
To know the variant type's members, we need to call
variant.type.check(). This also detects when a type contains
itself in a variant, exactly like the existing base.check()
detects when a type contains itself as a base. (Except that
we currently forbid anything but a struct as the type of a
variant, so we can't actually trigger this type of loop yet.)
Slight complication: an alternate's variant can have arbitrary
type, but only an object type's check() may be called outside
QAPISchema.check(). We could either skip the call for variants
of alternates, or skip it for non-object types. For now, do
the latter, because it's easier.
Then we call each variant member's check_clash() with the
appropriate 'seen' map. Since members of different variants
can't clash, we have to clone a fresh seen for each variant.
Wrap this in a new helper method
QAPISchemaObjectTypeVariants.check_clash().
Note that cloning 'seen' inside .check_clash() resembles
the one we just removed from .check() in 'qapi: Drop
obsolete tag value collision assertions'; the difference here is
that we are now checking for clashes among the qapi members of
the variant type, rather than for a single clash with the variant
tag name itself.
Note that, by construction, collisions can't actually happen for
simple unions: each variant's type is a wrapper with a single
member 'data', which will never collide with the only non-variant
member 'type'.
For alternates, there's nothing for a variant object type's
members to clash with, and therefore no need to call the new
variants.check_clash().
No change to generated code.
Signed-off-by: Eric Blake <eblake@redhat.com>
Message-Id: <1447836791-369-12-git-send-email-eblake@redhat.com>
[Commit message tweaked]
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reduce the ugly flat union / simple union conditional by doing just
the essential work here, namely setting self.tag_member.
Move the rest to callers.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Message-Id: <1446559499-26984-7-git-send-email-armbru@redhat.com>
[rebase to earlier changes that moved tag_member.check() of
alternate types, and tweak commit title and wording]
Signed-off-by: Eric Blake <eblake@redhat.com>
Message-Id: <1447836791-369-11-git-send-email-eblake@redhat.com>
While there, stick in a TODO change key of seen from QAPI name to C
name. Can't do it right away, because it would fail the assertion for
tests/qapi-schema/args-has-clash.json.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Message-Id: <1446559499-26984-6-git-send-email-armbru@redhat.com>
Signed-off-by: Eric Blake <eblake@redhat.com>
Message-Id: <1447836791-369-10-git-send-email-eblake@redhat.com>
We can use seen.values() instead if we make it an OrderedDict.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Message-Id: <1446559499-26984-5-git-send-email-armbru@redhat.com>
Signed-off-by: Eric Blake <eblake@redhat.com>
Message-Id: <1447836791-369-9-git-send-email-eblake@redhat.com>
This hunk
@@ -964,6 +965,7 @@ class QAPISchemaObjectType(QAPISchemaType):
members = []
seen = {}
for m in members:
+ assert c_name(m.name) not in seen
seen[m.name] = m
for m in self.local_members:
m.check(schema, members, seen)
is plainly broken.
Asserting the members inherited from base don't clash is somewhat
redundant, because self.base.check() just checked that. But it
doesn't hurt.
The idea to use c_name(m.name) instead of m.name for collision
checking is sound, because we need to catch clashes between the m.name
and between the c_name(m.name), and when two m.name clash, then their
c_name() also clash.
However, using c_name(m.name) instead of m.name in one of several
places doesn't work. See the very next line.
Keep the assertion, but drop the c_name() for now. A future commit
will bring it back.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Message-Id: <1446559499-26984-4-git-send-email-armbru@redhat.com>
[change TABs in commit message to space]
Signed-off-by: Eric Blake <eblake@redhat.com>
Message-Id: <1447836791-369-8-git-send-email-eblake@redhat.com>
QAPISchemaObjectTypeVariants.check() parameter members and
QAPISchemaObjectTypeVariant.check() parameter seen are no longer used,
drop them.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Message-Id: <1446559499-26984-3-git-send-email-armbru@redhat.com>
[rebase to earlier changes that moved tag_member.check() of
alternate types]
Signed-off-by: Eric Blake <eblake@redhat.com>
Message-Id: <1447836791-369-7-git-send-email-eblake@redhat.com>
QAPISchemaObjectTypeMember.check() currently does four things:
1. Compute self.type
2. Accumulate members in all_members
Only one caller cares: QAPISchemaObjectType.check() uses it to
compute self.members. The other callers pass a throw-away
accumulator.
3. Accumulate a map from names to members in seen
Only one caller cares: QAPISchemaObjectType.check() uses it to
compute its local variable seen, for self.variants.check(), which
uses it to compute self.variants.tag_member from
self.variants.tag_name. The other callers pass a throw-away
accumulator.
4. Check for collisions
This piggybacks on 3: before adding a new entry, we assert it's new.
Only one caller cares: QAPISchemaObjectType.check() uses it to
assert non-variant members don't clash.
Simplify QAPISchemaObjectType.check(): move 2.-4. to
QAPISchemaObjectType.check(), and drop parameters all_members and
seen.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Message-Id: <1446559499-26984-2-git-send-email-armbru@redhat.com>
[rebase to earlier changes that moved tag_member.check() of
alternate types, commit message typo fix]
Signed-off-by: Eric Blake <eblake@redhat.com>
Message-Id: <1447836791-369-6-git-send-email-eblake@redhat.com>
Union tag values can't clash with member names in generated C anymore
since commit e4ba22b, but QAPISchemaObjectTypeVariants.check() still
asserts they don't. Drop it.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Message-Id: <1446559499-26984-1-git-send-email-armbru@redhat.com>
Signed-off-by: Eric Blake <eblake@redhat.com>
Message-Id: <1447836791-369-5-git-send-email-eblake@redhat.com>
Simplify gen_struct_fields() back to a single iteration over a
list of fields (like it was prior to commit f87ab7f9), by moving
the generated comments to gen_object(). Then, inline
gen_struct_field() into its only caller.
Signed-off-by: Eric Blake <eblake@redhat.com>
Message-Id: <1447836791-369-4-git-send-email-eblake@redhat.com>
Signed-off-by: Markus Armbruster <armbru@redhat.com>
These two methods are now close enough that we can finally merge
them, relying on the fact that simple unions now provide a
reasonable local_members. Change gen_struct() to gen_object()
that handles all forms of QAPISchemaObjectType, and rename and
shrink gen_union() to gen_variants() to handle the portion of
gen_object() needed when variants are present.
gen_struct_fields() now has a single caller, so it no longer
needs an optional parameter; however, I did not choose to inline
it into the caller.
No difference to generated code.
Signed-off-by: Eric Blake <eblake@redhat.com>
Message-Id: <1447836791-369-3-git-send-email-eblake@redhat.com>
Signed-off-by: Markus Armbruster <armbru@redhat.com>
We were previously creating all unions with an empty list for
local_members. However, it will make it easier to unify struct
and union generation if we include the generated tag member in
local_members. That way, we can have a common code pattern:
visit the base (if any), visit the local members (if any), visit
the variants (if any). The local_members of a flat union
remains empty (because the discriminator is already visited as
part of the base). Then, by visiting tag_member.check() during
AlternateType.check(), we no longer need to call it during
Variants.check().
The various front end entities now exist as follows:
struct: optional base, optional local_members, no variants
simple union: no base, one-element local_members, variants with tag_member
from local_members
flat union: base, no local_members, variants with tag_member from base
alternate: no base, no local_members, variants
With the new local members, we require a bit of finesse to
avoid assertions in the clients.
No change to generated code.
Signed-off-by: Eric Blake <eblake@redhat.com>
Message-Id: <1447836791-369-2-git-send-email-eblake@redhat.com>
Signed-off-by: Markus Armbruster <armbru@redhat.com>
IOPort read access is limited to one byte at a time by
fw_cfg_comb_valid(). As such, fw_cfg_comb_read() may safely
ignore its size argument (which will always be 1), and simply
call its fw_cfg_read() helper function once, returning 8 bits
via the least significant byte of a 64-bit return value.
This patch replaces fw_cfg_comb_read() with the generic method
fw_cfg_data_read(), and removes the unused fw_cfg_read() helper.
When called with size = 1, fw_cfg_data_read() acts exactly like
fw_cfg_read(), performing the same set of sanity checks, and
executing the while loop at most once (subject to the current
read offset being within range).
Cc: Laszlo Ersek <lersek@redhat.com>
Cc: Gerd Hoffmann <kraxel@redhat.com>
Cc: Marc Marí <markmb@redhat.com>
Signed-off-by: Gabriel Somlo <somlo@cmu.edu>
Message-id: 1446733972-1602-7-git-send-email-somlo@cmu.edu
Reviewed-by: Laszlo Ersek <lersek@redhat.com>
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Introduce fw_cfg_data_read(), a generic read method which works
on all access widths (1 through 8 bytes, inclusive), and can be
used during both IOPort and MMIO read accesses.
To maintain legibility, only fw_cfg_data_mem_read() (the MMIO
data read method) is replaced by this patch. The new method
essentially unwinds the fw_cfg_data_mem_read() + fw_cfg_read()
combo, but without unnecessarily repeating all the validity
checks performed by the latter on each byte being read.
This patch also modifies the trace_fw_cfg_read prototype to
accept a 64-bit value argument, allowing it to work properly
with the new read method, but also remain backward compatible
with existing call sites.
Cc: Laszlo Ersek <lersek@redhat.com>
Cc: Gerd Hoffmann <kraxel@redhat.com>
Cc: Marc Marí <markmb@redhat.com>
Signed-off-by: Gabriel Somlo <somlo@cmu.edu>
Reviewed-by: Laszlo Ersek <lersek@redhat.com>
Message-id: 1446733972-1602-6-git-send-email-somlo@cmu.edu
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
When calculating a pointer to the currently selected fw_cfg item, the
following is used:
FWCfgEntry *e = &s->entries[arch][s->cur_entry & FW_CFG_ENTRY_MASK];
When s->cur_entry is FW_CFG_INVALID, we are calculating the address of
a non-existent element in s->entries[arch][...], which is undefined.
This patch ensures the resulting entry pointer is set to NULL whenever
s->cur_entry is FW_CFG_INVALID.
Reported-by: Laszlo Ersek <lersek@redhat.com>
Reviewed-by: Laszlo Ersek <lersek@redhat.com>
Signed-off-by: Gabriel Somlo <somlo@cmu.edu>
Message-id: 1446733972-1602-5-git-send-email-somlo@cmu.edu
Cc: Marc Marí <markmb@redhat.com>
Signed-off-by: Gabriel Somlo <somlo@cmu.edu>
Reviewed-by: Laszlo Ersek <lersek@redhat.com>
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Read callbacks are now only invoked at item selection, before any
data is read. As such, the value of the offset argument passed to
the callback will always be 0. Also, the two callback instances
currently in use both leave their offset argument unused.
This patch removes the offset argument from the fw_cfg read callback
prototype, and from the currently available instances. The unused
(write) callback prototype is also removed (write support was removed
earlier, in commit 023e3148).
Cc: Laszlo Ersek <lersek@redhat.com>
Cc: Gerd Hoffmann <kraxel@redhat.com>
Cc: Marc Marí <markmb@redhat.com>
Signed-off-by: Gabriel Somlo <somlo@cmu.edu>
Reviewed-by: Laszlo Ersek <lersek@redhat.com>
Message-id: 1446733972-1602-4-git-send-email-somlo@cmu.edu
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Currently, the fw_cfg internal API specifies that if an item was set up
with a read callback, the callback must be run each time a byte is read
from the item. This behavior is both wasteful (most items do not have a
read callback set), and impractical for bulk transfers (e.g., DMA read).
At the time of this writing, the only items configured with a callback
are "/etc/table-loader", "/etc/acpi/tables", and "/etc/acpi/rsdp". They
all share the same callback functions: virt_acpi_build_update() on ARM
(in hw/arm/virt-acpi-build.c), and acpi_build_update() on i386 (in
hw/i386/acpi.c). Both of these callbacks are one-shot (i.e. they return
without doing anything at all after the first time they are invoked with
a given build_state; since build_state is also shared across all three
items mentioned above, the callback only ever runs *once*, the first
time either of the listed items is read).
This patch amends the specification for fw_cfg_add_file_callback() to
state that any available read callback will only be invoked once each
time the item is selected. This change has no practical effect on the
current behavior of QEMU, and it enables us to significantly optimize
the behavior of fw_cfg reads during guest firmware setup, eliminating
a large amount of redundant callback checks and invocations.
Cc: Laszlo Ersek <lersek@redhat.com>
Cc: Gerd Hoffmann <kraxel@redhat.com>
Cc: Marc Marí <markmb@redhat.com>
Signed-off-by: Gabriel Somlo <somlo@cmu.edu>
Reviewed-by: Laszlo Ersek <lersek@redhat.com>
Message-id: 1446733972-1602-3-git-send-email-somlo@cmu.edu
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Move documentation for fw_cfg functions internal to qemufrom
docs/specs/fw_cfg.txt to the fw_cfg.h header file, next to
their prototype declarations, formatted as doc-comments.
NOTE: Documentation for fw_cfg_add_callback() is completely
dropped by this patch, as that function has been eliminated
by commit 023e3148.
Suggested-by: Peter Maydell <peter.maydell@linaro.org>
Cc: Laszlo Ersek <lersek@redhat.com>
Cc: Gerd Hoffmann <kraxel@redhat.com>
Cc: Marc Marí <markmb@redhat.com>
Cc: Jordan Justen <jordan.l.justen@intel.com>
Cc: Paolo Bonzini <pbonzini@redhat.com>
Cc: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Gabriel Somlo <somlo@cmu.edu>
Reviewed-by: Laszlo Ersek <lersek@redhat.com>
Message-id: 1446733972-1602-2-git-send-email-somlo@cmu.edu
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
The AudioDeviceAddIOProc() and AudioDeviceRemoveIOProc() functions were
deprecated in OSX 10.5. Since we don't support any earlier versions of
OSX, we can simply replace them with the new APIs
AudioDeviceCreateIOProcID() and AudioDeviceRemoveIOProcID().
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Message-id: 1448747724-15572-6-git-send-email-peter.maydell@linaro.org
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Use the new-in-OSX 10.6 API AudioObjectGetPropertyData() instead
of the deprecated AudioDeviceGetProperty() and AudioDeviceSetProperty()
functions when possible.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Message-id: 1448747724-15572-5-git-send-email-peter.maydell@linaro.org
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
The CoreAudio APIs AudioDeviceGetProperty and AudioDeviceSetProperty are
deprecated from OSX 10.6, so factor out our calls to them so we can
provide versions which use the replacement APIs on OSX newer than 10.5.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Message-id: 1448747724-15572-4-git-send-email-peter.maydell@linaro.org
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
If we're building for OSX 10.6 or better, use the new API
AudioObjectGetPropertyData for getting the default voice.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Message-id: 1448747724-15572-3-git-send-email-peter.maydell@linaro.org
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
The CoreAudio function AudioHardwareGetProperty has been deprecated
starting with OSX 10.6, so factor out our call to it so we can
provide an equivalent with the new APIs when they exist.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Message-id: 1448747724-15572-2-git-send-email-peter.maydell@linaro.org
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Make ehci_process_itd return an error in case we didn't do any actual
iso transfer because we've found no active transaction. That'll avoid
ehci happily run in circles forever if the guest builds a loop out of
idts.
This is CVE-2015-8558.
Cc: qemu-stable@nongnu.org
Reported-by: Qinghao Tang <luodalongde@gmail.com>
Tested-by: P J P <ppandit@redhat.com>
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
When the host polls for events, we check our
events qlist and send one event at a time. Also, note
that the event packet needs to be sent in one go, so
I increased the max packet size to 64.
Tested with a linux guest.
Signed-off-by: Bandan Das <bsd@redhat.com>
Message-id: 1448314625-3855-5-git-send-email-bsd@redhat.com
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
For now, we use inotify watches to track only a small number of
events, namely, add, delete and modify. Note that for delete, the kernel
already deactivates the watch for us and we just need to
take care of modifying our internal state.
inotify is a linux only mechanism.
Suggested-by: Gerd Hoffman <kraxel@redhat.com>
Signed-off-by: Bandan Das <bsd@redhat.com>
Message-id: 1448314625-3855-4-git-send-email-bsd@redhat.com
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
On a reset, call usb_mtp_object_free on all objects and their children
Signed-off-by: Bandan Das <bsd@redhat.com>
Message-id: 1448314625-3855-3-git-send-email-bsd@redhat.com
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
To support adding/removal of objects, we will need to update
the object cache hierarchy we have built internally. Convert
to using a Qlist for easier management.
Signed-off-by: Bandan Das <bsd@redhat.com>
Message-id: 1448314625-3855-2-git-send-email-bsd@redhat.com
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
While in the long term we want throttling to be its own block filter
BDS, in the short term we want it to be part of the BB instead of a BDS;
even in the long term we may want legacy throttling to be automatically
tied to the BB.
blockdev-insert-medium and blockdev-remove-medium do not retain
throttling information in the BB (deliberately so). Therefore, using
them means tying this information to a BDS, which would break the model
described above. (The same applies to other flags such as
detect_zeroes.) We probably want to move this information to the BB or
its own filter BDS before blockdev-{insert,remove}-medium can be
considered completely stable.
Therefore, mark these functions experimental for the time being.
Suggested-by: Markus Armbruster <armbru@redhat.com>
Signed-off-by: Max Reitz <mreitz@redhat.com>
Acked-by: Markus Armbruster <armbru@redhat.com>
Acked-by: Kevin Wolf <kwolf@redhat.com>
Message-id: 1449847385-13986-2-git-send-email-mreitz@redhat.com
Reviewed-by: Eric Blake <eblake@redhat.com>
[PMM: fixed format nit (underlining) in qmp-commands.hx]
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>