Commit graph

12 commits

Author SHA1 Message Date
Dr. David Alan Gilbert fc3a1fd74f x86: Work around SMI migration breakages
Migration from a 2.3.0 qemu results in a reboot on the receiving QEMU
due to a disagreement about SM (System management) interrupts.

2.3.0 didn't have much SMI support, but it did set CPU_INTERRUPT_SMI
and this gets into the migration stream, but on 2.3.0 it
never got delivered.

~2.4.0 SMI interrupt support was added but was broken - so
that when a 2.3.0 stream was received it cleared the CPU_INTERRUPT_SMI
but never actually caused an interrupt.

The SMI delivery was recently fixed by 68c6efe07a, but the
effect now is that an incoming 2.3.0 stream takes the interrupt it
had flagged but it's bios can't actually handle it(I think
partly due to the original interrupt not being taken during boot?).
The consequence is a triple(?) fault and a reboot.

Tested from:
  2.3.1 -M 2.3.0
  2.7.0 -M 2.3.0
  2.8.0 -M 2.3.0
  2.8.0 -M 2.8.0

This corresponds to RH bugzilla entry 1420679.

Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Message-Id: <20170223133441.16010-1-dgilbert@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2017-03-03 16:40:03 +01:00
Paolo Bonzini 2ae41db262 KVM: do not use sigtimedwait to catch SIGBUS
Call kvm_on_sigbus_vcpu asynchronously from the VCPU thread.
Information for the SIGBUS can be stored in thread-local variables
and processed later in kvm_cpu_exec.

Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2017-03-03 16:40:02 +01:00
Paolo Bonzini 4d39892cca KVM: remove kvm_arch_on_sigbus
Build it on kvm_arch_on_sigbus_vcpu instead.  They do the same
for "action optional" SIGBUSes, and the main thread should never get
"action required" SIGBUSes because it blocks the signal.

Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2017-03-03 16:40:02 +01:00
Paolo Bonzini a16fc07ebd cpus: reorganize signal handling code
Move the KVM "eat signals" code under CONFIG_LINUX, in preparation
for moving it to kvm-all.c; reraise non-MCE SIGBUS immediately,
without passing it to KVM.

Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2017-03-03 16:40:02 +01:00
Paolo Bonzini 20e0ff59a9 KVM: x86: cleanup SIGBUS handlers
This patch should have no semantic change.

Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2017-03-03 16:40:02 +01:00
Phil Dennis-Jordan 9954a1582e x86-KVM: Supply TSC and APIC clock rates to guest like VMWare
This fixes timekeeping of x86-64 Darwin/OS X/macOS guests when using KVM.

Darwin/OS X/macOS for x86-64 uses the TSC for timekeeping; it normally calibrates this by querying various clock frequency scaling MSRs. Details depend on the exact CPU model detected. The local APIC timer frequency is extracted from (EFI) firmware.

This is problematic in the presence of virtualisation, as the MSRs in question are typically not handled by the hypervisor. VMWare (Fusion) advertises TSC and APIC frequency via a custom 0x40000010 CPUID leaf, in the eax and ebx registers respectively. This is documented at https://lwn.net/Articles/301888/ among other places.

Darwin/OS X/macOS looks for the generic 0x40000000 hypervisor leaf, and if this indicates via eax that leaf 0x40000010 might be available, that is in turn queried for the two frequencies.

This adds a CPU option "vmware-cpuid-freq" to enable the same behaviour when running Qemu with KVM acceleration, if the KVM TSC frequency can be determined, and it is stable. (invtsc or user-specified) The virtualised APIC bus cycle is hardcoded to 1GHz in KVM, so ebx of the CPUID leaf is also hardcoded to this value.

Signed-off-by: Phil Dennis-Jordan <phil@philjordan.eu>
Message-Id: <1484921496-11257-2-git-send-email-phil@philjordan.eu>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2017-01-27 18:07:57 +01:00
Ashijeet Acharya fe44dc9180 migration: disallow migrate_add_blocker during migration
If a migration is already in progress and somebody attempts
to add a migration blocker, this should rightly fail.

Add an errp parameter and a retcode return value to migrate_add_blocker.

Signed-off-by: John Snow <jsnow@redhat.com>
Signed-off-by: Ashijeet Acharya <ashijeetacharya@gmail.com>
Message-Id: <1484566314-3987-5-git-send-email-ashijeetacharya@gmail.com>
Reviewed-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Acked-by: Greg Kurz <groug@kaod.org>
Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
  Merged with recent 'Allow invtsc migration' change
2017-01-24 18:00:30 +00:00
Eduardo Habkost d99569d9d8 kvm: Allow invtsc migration if tsc-khz is set explicitly
We can safely allow a VM to be migrated with invtsc enabled if
tsc-khz is set explicitly, because:
* QEMU already refuses to start if it can't set the TSC frequency
  to the configured value.
* Management software is already required to keep device
  configuration (including CPU configuration) the same on
  migration source and destination.

Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
Message-Id: <20170108173234.25721-3-ehabkost@redhat.com>
Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
2017-01-23 21:26:27 -02:00
Eduardo Habkost d74460ec1b kvm: Simplify invtsc check
Instead of searching the table we have just built, we can check
the env->features field directly.

Reviewed-by: Marcelo Tosatti <mtosatti@redhat.com>
Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
Message-Id: <20170108173234.25721-2-ehabkost@redhat.com>
Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
2017-01-23 21:26:27 -02:00
Vincent Palatin b39466269b kvm: move cpu synchronization code
Move the generic cpu_synchronize_ functions to the common hw_accel.h header,
in order to prepare for the addition of a second hardware accelerator.

Signed-off-by: Stefan Weil <sw@weilnetz.de>
Signed-off-by: Vincent Palatin <vpalatin@chromium.org>
Message-Id: <f5c3cffe8d520011df1c2e5437bb814989b48332.1484045952.git.vpalatin@chromium.org>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2017-01-19 22:07:46 +01:00
Marcelo Tosatti 6053a86fe7 kvmclock: reduce kvmclock difference on migration
Check for KVM_CAP_ADJUST_CLOCK capability KVM_CLOCK_TSC_STABLE, which
indicates that KVM_GET_CLOCK returns a value as seen by the guest at
that moment.

For new machine types, use this value rather than reading
from guest memory.

This reduces kvmclock difference on migration from 5s to 0.1s
(when max_downtime == 5s).

Signed-off-by: Marcelo Tosatti <mtosatti@redhat.com>
Message-Id: <20161121105052.598267440@redhat.com>
[Add comment explaining what is going on. - Paolo]
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2016-12-22 16:00:56 +01:00
Thomas Huth fcf5ef2ab5 Move target-* CPU file into a target/ folder
We've currently got 18 architectures in QEMU, and thus 18 target-xxx
folders in the root folder of the QEMU source tree. More architectures
(e.g. RISC-V, AVR) are likely to be included soon, too, so the main
folder of the QEMU sources slowly gets quite overcrowded with the
target-xxx folders.
To disburden the main folder a little bit, let's move the target-xxx
folders into a dedicated target/ folder, so that target-xxx/ simply
becomes target/xxx/ instead.

Acked-by: Laurent Vivier <laurent@vivier.eu> [m68k part]
Acked-by: Bastian Koppelmann <kbastian@mail.uni-paderborn.de> [tricore part]
Acked-by: Michael Walle <michael@walle.cc> [lm32 part]
Acked-by: Cornelia Huck <cornelia.huck@de.ibm.com> [s390x part]
Reviewed-by: Christian Borntraeger <borntraeger@de.ibm.com> [s390x part]
Acked-by: Eduardo Habkost <ehabkost@redhat.com> [i386 part]
Acked-by: Artyom Tarasenko <atar4qemu@gmail.com> [sparc part]
Acked-by: Richard Henderson <rth@twiddle.net> [alpha part]
Acked-by: Max Filippov <jcmvbkbc@gmail.com> [xtensa part]
Reviewed-by: David Gibson <david@gibson.dropbear.id.au> [ppc part]
Acked-by: Edgar E. Iglesias <edgar.iglesias@xilinx.com> [cris&microblaze part]
Acked-by: Guan Xuetao <gxt@mprc.pku.edu.cn> [unicore32 part]
Signed-off-by: Thomas Huth <thuth@redhat.com>
2016-12-20 21:52:12 +01:00
Renamed from target-i386/kvm.c (Browse further)