Note that the new variants are impossible in qemu_gluster_glfs_init(),
because the gconf->server can only come from qemu_gluster_parse_uri()
or qemu_gluster_parse_json(), and neither can create anything but
'inet' or 'unix'.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Max Reitz <mreitz@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Message-id: 1490895797-29094-7-git-send-email-armbru@redhat.com
Signed-off-by: Max Reitz <mreitz@redhat.com>
qemu_gluster_glfs_init() and qemu_gluster_parse_json() rely on the
fact that SocketAddressFlatType has only two members
SOCKET_ADDRESS_FLAT_TYPE_INET and SOCKET_ADDRESS_FLAT_TYPE_UNIX.
Correct, but won't stay correct. Make them more robust.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Max Reitz <mreitz@redhat.com>
Reviewed-by: Jeff Cody <jcody@redhat.com>
Message-id: 1490895797-29094-6-git-send-email-armbru@redhat.com
Signed-off-by: Max Reitz <mreitz@redhat.com>
-blockdev and blockdev_add convert their arguments via QObject to
BlockdevOptions for qmp_blockdev_add(), which converts them back to
QObject, then to a flattened QDict. The QDict's members are typed
according to the QAPI schema.
-drive converts its argument via QemuOpts to a (flat) QDict. This
QDict's members are all QString.
Thus, the QType of a flat QDict member depends on whether it comes
from -drive or -blockdev/blockdev_add, except when the QAPI type maps
to QString, which is the case for 'str' and enumeration types.
The block layer core extracts generic configuration from the flat
QDict, and the block driver extracts driver-specific configuration.
Both commonly do so by converting (parts of) the flat QDict to
QemuOpts, which turns all values into strings. Not exactly elegant,
but correct.
However, A few places access the flat QDict directly:
* Most of them access members that are always QString. Correct.
* bdrv_open_inherit() accesses a boolean, carefully. Correct.
* nfs_config() uses a QObject input visitor. Correct only because the
visited type contains nothing but QStrings.
* nbd_config() and ssh_config() use a QObject input visitor, and the
visited types contain non-QStrings: InetSocketAddress members
@numeric, @to, @ipv4, @ipv6. -drive works as long as you don't try
to use them (they're all optional). @to is ignored anyway.
Reproducer:
-drive driver=ssh,server.host=h,server.port=22,server.ipv4,path=p
-drive driver=nbd,server.type=inet,server.data.host=h,server.data.port=22,server.data.ipv4
both fail with "Invalid parameter type for 'data.ipv4', expected: boolean"
Add suitable comments to all these places. Mark the buggy ones FIXME.
"Fortunately", -drive's driver-specific options are entirely
undocumented.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Message-id: 1490895797-29094-5-git-send-email-armbru@redhat.com
[mreitz: Fixed two typos]
Reviewed-by: Eric Blake <eblake@redhat.com>
Signed-off-by: Max Reitz <mreitz@redhat.com>
Certain features make sense only with certain address families. For
instance, passing file descriptors requires AF_UNIX. Testing
SocketAddress's saddr->type == SOCKET_ADDRESS_KIND_UNIX is obvious,
but problematic: it can't recognize AF_UNIX when type ==
SOCKET_ADDRESS_KIND_FD.
Mark such tests of saddr->type TODO. We may want to check the address
family with getsockname() there.
Cc: Paolo Bonzini <pbonzini@redhat.com>
Cc: Gerd Hoffmann <kraxel@redhat.com>
Cc: Daniel P. Berrange <berrange@redhat.com>
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Max Reitz <mreitz@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Message-id: 1490895797-29094-2-git-send-email-armbru@redhat.com
Signed-off-by: Max Reitz <mreitz@redhat.com>
If the user has explicitly specified a block driver and thus a protocol,
we have to make sure the URL's protocol prefix matches. Otherwise the
latter will silently override the former which might catch some users by
surprise.
Signed-off-by: Max Reitz <mreitz@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Reviewed-by: Jeff Cody <jcody@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Message-id: 20170331120431.1767-3-mreitz@redhat.com
Signed-off-by: Jeff Cody <jcody@redhat.com>
Commit c7cacb3 accidentally broke legacy key-value parsing through
pseudo-filename parsing of -drive file=rbd://..., for any key that
contains an escaped ':'. Such a key is surprisingly common, thanks
to mon_host specifying a 'host:port' string. The break happens
because passing things from QDict through QemuOpts back to another
QDict requires that we pack our parsed key/value pairs into a string,
and then reparse that string, but the intermediate string that we
created ("key1=value1:key2=value2") lost the \: escaping that was
present in the original, so that we could no longer see which : were
used as separators vs. those used as part of the original input.
Fix it by collecting the key/value pairs through a QList, and
sending that list on a round trip through a JSON QString (as in
'["key1","value1","key2","value2"]') on its way through QemuOpts,
rather than hand-rolling our own string. Since the string is only
handled internally, this was faster than creating a full-blown
struct of '[{"key1":"value1"},{"key2":"value2"}]', and safer at
guaranteeing order compared to '{"key1":"value1","key2":"value2"}'.
It would be nicer if we didn't have to round-trip through QemuOpts
in the first place, but that's a much bigger task for later.
Reproducer:
./x86_64-softmmu/qemu-system-x86_64 -nodefaults -nographic -qmp stdio \
-drive 'file=rbd:volumes/volume-ea141b5c-cdb3-4765-910d-e7008b209a70'\
':id=compute:key=AQAVkvxXAAAAABAA9ZxWFYdRmV+DSwKr7BKKXg=='\
':auth_supported=cephx\;none:mon_host=192.168.1.2\:6789'\
',format=raw,if=none,id=drive-virtio-disk0,'\
'serial=ea141b5c-cdb3-4765-910d-e7008b209a70,cache=writeback'
Even without an RBD setup, this serves a test of whether we get
the incorrect parser error of:
qemu-system-x86_64: -drive file=rbd:...cache=writeback: conf option 6789 has no value
or the correct behavior of hanging while trying to connect to
the requested mon_host of 192.168.1.2:6789.
Reported-by: Alexandru Avadanii <Alexandru.Avadanii@enea.com>
Signed-off-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Jeff Cody <jcody@redhat.com>
Reviewed-by: Max Reitz <mreitz@redhat.com>
Message-id: 20170331152730.12514-1-eblake@redhat.com
Signed-off-by: Jeff Cody <jcody@redhat.com>
qemu_rbd_open() takes option parameters as a flattened QDict, with
keys of the form server.%d.host, server.%d.port, where %d counts up
from zero.
qemu_rbd_array_opts() extracts these values as follows. First, it
calls qdict_array_entries() to find the list's length. For each list
element, it formats the list's key prefix (e.g. "server.0."), then
creates a new QDict holding the options with that key prefix, then
converts that to a QemuOpts, so it can finally get the member values
from there.
If there's one surefire way to make code using QDict more awkward,
it's creating more of them and mixing in QemuOpts for good measure.
The extraction of keys starting with server.%d into another QDict
makes us ignore parameters like server.0.neither-host-nor-port
silently.
The conversion to QemuOpts abuses runtime_opts, as described a few
commits ago.
Rewrite to simply get the values straight from the options QDict.
Fixes -drive not to crash when server.*.* are present, but
server.*.host is absent.
Fixes -drive to reject invalid server.*.*.
Permits cleaning up runtime_opts. Do that, and fix -drive to reject
bogus parameters host and port instead of silently ignoring them.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Jeff Cody <jcody@redhat.com>
Message-id: 1490691368-32099-11-git-send-email-armbru@redhat.com
Signed-off-by: Jeff Cody <jcody@redhat.com>
This reverts half of commit 0a55679. We're having second thoughts on
the QAPI schema (and thus the external interface), and haven't reached
consensus, yet. Issues include:
* The implementation uses deprecated rados_conf_set() key
"auth_supported". No biggie.
* The implementation makes -drive silently ignore invalid parameters
"auth" and "auth-supported.*.X" where X isn't "auth". Fixable (in
fact I'm going to fix similar bugs around parameter server), so
again no biggie.
* BlockdevOptionsRbd member @password-secret applies only to
authentication method cephx. Should it be a variant member of
RbdAuthMethod?
* BlockdevOptionsRbd member @user could apply to both methods cephx
and none, but I'm not sure it's actually used with none. If it
isn't, should it be a variant member of RbdAuthMethod?
* The client offers a *set* of authentication methods, not a list.
Should the methods be optional members of BlockdevOptionsRbd instead
of members of list @auth-supported? The latter begs the question
what multiple entries for the same method mean. Trivial question
now that RbdAuthMethod contains nothing but @type, but less so when
RbdAuthMethod acquires other members, such the ones discussed above.
* How BlockdevOptionsRbd member @auth-supported interacts with
settings from a configuration file specified with @conf is
undocumented. I suspect it's untested, too.
Let's avoid painting ourselves into a corner now, and revert the
feature for 2.9.
Note that users can still configure authentication methods with a
configuration file. They probably do that anyway if they use Ceph
outside QEMU as well.
Further note that this doesn't affect use of key "auth-supported" in
-drive file=rbd:...:key=value.
qemu_rbd_array_opts()'s parameter @type now must be RBD_MON_HOST,
which is silly. This will be cleaned up shortly.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Max Reitz <mreitz@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Jeff Cody <jcody@redhat.com>
Message-id: 1490691368-32099-9-git-send-email-armbru@redhat.com
Signed-off-by: Jeff Cody <jcody@redhat.com>
The conversion from QDict to QemuOpts is pointless. Simply get the
stuff straight from the QDict.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Kevin Wolf <kwolf@redhat.com>
Reviewed-by: Jeff Cody <jcody@redhat.com>
Message-id: 1490691368-32099-8-git-send-email-armbru@redhat.com
Signed-off-by: Jeff Cody <jcody@redhat.com>
runtime_opts is used for three different purposes:
* qemu_rbd_open() uses it to accept options it recognizes, such as
"pool" and "image". Other .bdrv_open() methods do it similarly.
* qemu_rbd_open() accepts additional list-valued options
auth-supported and server, with the help of qemu_rbd_array_opts().
The list elements are again dictionaries. qemu_rbd_array_opts()
uses runtime_opts to accept their members. Thus, runtime_opts
contains recognized sub-sub-options "auth", "host", "port" in
addition to recognized options. No other block driver does that.
* qemu_rbd_create() uses it to convert the QDict produced by
qemu_rbd_parse_filename() to QemuOpts. No other block driver does
that. The keys produced by qemu_rbd_parse_filename() are "pool",
"image", "snapshot", "conf", "user" and "keyvalue-pairs".
qemu_rbd_open() accepts these, so no additional ones here.
This is a confusing mess. Dates back to commit 0f9d252. First step
to clean it up is documenting runtime_opts.desc[]:
* Reorder entries to match the QAPI schema, like we do in other block
drivers.
* Document why the schema's "server" and "auth-supported" aren't in
.desc[].
* Document why "keyvalue-pairs", "host", "port" and "auth" are in
.desc[], but not the schema.
* Delete "filename", because none of the three users actually uses it.
This fixes -drive to reject parameter filename instead of silently
ignoring it.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Max Reitz <mreitz@redhat.com>
Reviewed-by: Jeff Cody <jcody@redhat.com>
Message-id: 1490691368-32099-7-git-send-email-armbru@redhat.com
Signed-off-by: Jeff Cody <jcody@redhat.com>
The way we communicate extra key-value pairs from
qemu_rbd_parse_filename() to qemu_rbd_open() exposes option parameter
"keyvalue-pairs" on the command line. It's not wanted there. Hack:
rename the parameter to "=keyvalue-pairs" to make it inaccessible.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Max Reitz <mreitz@redhat.com>
Reviewed-by: Jeff Cody <jcody@redhat.com>
Message-id: 1490691368-32099-6-git-send-email-armbru@redhat.com
Signed-off-by: Jeff Cody <jcody@redhat.com>
This code in qemu_rbd_parse_filename()
found_str = qemu_rbd_next_tok(p, '\0', &p);
p = found_str;
has no effect. Drop it, and simplify qemu_rbd_next_tok().
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Max Reitz <mreitz@redhat.com>
Reviewed-by: Jeff Cody <jcody@redhat.com>
Message-id: 1490691368-32099-5-git-send-email-armbru@redhat.com
Signed-off-by: Jeff Cody <jcody@redhat.com>
We laboriously enforce that parameter values are between one and some
arbitrary limit in length. Only RBD_MAX_IMAGE_NAME_SIZE comes from
librbd.h, and I'm not sure it applies. Where the other limits come
from is unclear.
Drop the length checking. The limits librbd actually imposes must be
checked by librbd anyway.
There's one minor complication: BDRVRBDState member name is a
fixed-size array. Depends on the length limit. Make it a pointer to
a dynamically allocated string.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Max Reitz <mreitz@redhat.com>
Reviewed-by: Jeff Cody <jcody@redhat.com>
Message-id: 1490691368-32099-4-git-send-email-armbru@redhat.com
Signed-off-by: Jeff Cody <jcody@redhat.com>
qemu_rbd_open() neglects to check pool and image are present. Missing
image is caught by rbd_open(), but missing pool crashes. Reproducer:
$ qemu-system-x86_64 -nodefaults -drive driver=rbd,id=rbd,image=i,...
terminate called after throwing an instance of 'std::logic_error'
what(): basic_string::_M_construct null not valid
Aborted (core dumped)
where ... is a working server.0.{host,port} configuration.
Doesn't affect -drive with file=..., because qemu_rbd_parse_filename()
always sets both pool and image.
Doesn't affect -blockdev, because pool and image are mandatory in the
QAPI schema.
Fix by adding the missing checks.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Max Reitz <mreitz@redhat.com>
Reviewed-by: Jeff Cody <jcody@redhat.com>
Message-id: 1490691368-32099-3-git-send-email-armbru@redhat.com
Signed-off-by: Jeff Cody <jcody@redhat.com>
Parallels driver should not call bdrv_truncate if the image was opened
in the read-only mode. Without the patch
qemu-img check harddisk.hds
asserts with
bdrv_truncate: Assertion `child->perm & BLK_PERM_RESIZE' failed.
Parameters used on the write path are not needed if the image is opened
in the read-only mode.
Signed-off-by: Denis V. Lunev <den@openvz.org>
Reported-by: Edgar Kaziahmedov <edos@virtuozzo.mipt.ru>
Message-id: 1490625488-7980-1-git-send-email-den@openvz.org
CC: Stefan Hajnoczi <stefanha@redhat.com>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
On OpenBSD none of the ioctls probe_logical_blocksize() tries
exist, so the variable sector_size is unused. Refactor the
code to avoid this (and reduce the duplicated code).
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Reviewed-by: Jeff Cody <jcody@redhat.com>
Message-id: 1490279788-12995-1-git-send-email-peter.maydell@linaro.org
Signed-off-by: Max Reitz <mreitz@redhat.com>
Success for bdrv_flush() means that all previously written data is safe
on disk. For fdatasync(), the best semantics we can hope for on Linux
(without O_DIRECT) is that all data that was written since the last call
was successfully written back. Therefore, and because we can't redo all
writes after a flush failure, we have to give up after a single
fdatasync() failure. After this failure, we would never be able to make
the promise that a successful bdrv_flush() makes.
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Message-id: 20170322210005.16533-1-kwolf@redhat.com
Reviewed-by: Fam Zheng <famz@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Signed-off-by: Max Reitz <mreitz@redhat.com>
After the switch to reading replies in a coroutine, nothing is
reentering pending receive coroutines if the connection hangs.
Move nbd_recv_coroutines_enter_all to the reply read coroutine,
which is the place where hangups are detected. nbd_teardown_connection
can simply wait for the reply read coroutine to detect the hangup
and clean up after itself.
This wouldn't be enough though because nbd_receive_reply returns 0
(rather than -EPIPE or similar) when reading from a hung connection.
Fix the return value check in nbd_read_reply_entry.
This fixes qemu-iotests 083.
Reported-by: Max Reitz <mreitz@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Message-id: 20170314111157.14464-1-pbonzini@redhat.com
Reviewed-by: Max Reitz <mreitz@redhat.com>
Signed-off-by: Max Reitz <mreitz@redhat.com>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Message-Id: <20170327123223.1199-1-stefanha@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
block/trace-events lists the parameters for mirror_yield
consistently with other mirror events (cnt just after s, like in
mirror_before_sleep; in_flight last, like in mirror_yield_in_flight).
But the callers were passing parameters in the wrong order, leading
to poor trace messages, including type truncation when there are
more than 4G dirty sectors involved. Broken since its introduction
in commit bd48bde.
While touching this, ensure that all callers use the same type
(uint64_t) for cnt, as a later patch will enable the compiler to do
stricter type-checking.
Signed-off-by: Eric Blake <eblake@redhat.com>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Allow block backends to forward drain requests to their devices/users.
The initial intended purpose for this patch is to allow BBs to forward
requests along to BlockJobs, which will want to pause if their associated
BB has entered a drained region.
Signed-off-by: John Snow <jsnow@redhat.com>
Reviewed-by: Jeff Cody <jcody@redhat.com>
Message-id: 20170316212351.13797-3-jsnow@redhat.com
Signed-off-by: Jeff Cody <jcody@redhat.com>
parallels block driver is completely broken since commit
commit 75cdcd1553
Author: Markus Armbruster <armbru@redhat.com>
Date: Tue Feb 21 21:14:08 2017 +0100
option: Fix checking of sizes for overflow and trailing crap
Right now even simple
qemu-io -c "read 512 64k" 1.hds
ends up with
Unexpected error in parse_option_size() at util/qemu-option.c:188:
Parameter 'prealloc-size' expects a non-negative number below 2^64
Aborted (core dumped)
The cure is simple - we should use 'M' as a suffix in default option value
instead of 'MiB'.
Signed-off-by: Edgar Kaziahmedov <edos@virtuozzo.mipt.ru>
Signed-off-by: Denis V. Lunev <den@openvz.org>
Message-id: 1490002022-22653-1-git-send-email-den@openvz.org
CC: Markus Armbruster <armbru@redhat.com>
CC: Stefan Hajnoczi <stefanha@redhat.com>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
EPROTO is not found in OpenBSD. We usually use EIO when no better
errno is available, do that here too.
Reported-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Message-id: 20170317152412.8472-1-pbonzini@redhat.com
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Tested-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
bdrv_child_set_perm alone is not very usable because the caller must
call bdrv_child_check_perm first. This is already encapsulated
conveniently in bdrv_child_try_set_perm, so remove the other prototypes
from the header and fix the one wrong caller, block/mirror.c.
Signed-off-by: Fam Zheng <famz@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
This fixes a leaked fd introduced in commit 9103f1ce.
Signed-off-by: Fam Zheng <famz@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Even if hidden_disk, secondary_disk are backing files, they all need
write permissions in replication scenario. Otherwise we will encouter
below exceptions on secondary side during adding nbd server:
{'execute': 'nbd-server-add', 'arguments': {'device': 'colo-disk', 'writable': true } }
{"error": {"class": "GenericError", "desc": "Conflicts with use by hidden-qcow2-driver as 'backing', which does not allow 'write' on sec-qcow2-driver-for-nbd"}}
CC: Zhang Hailiang <zhang.zhanghailiang@huawei.com>
CC: Zhang Chen <zhangchen.fnst@cn.fujitsu.com>
CC: Wen Congyang <wencongyang2@huawei.com>
Signed-off-by: Changlong Xie <xiecl.fnst@cn.fujitsu.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
The following pattern is unsafe:
char buf[32];
ret = read(fd, buf, sizeof(buf));
...
buf[ret] = 0;
If read(2) returns 32 then a byte beyond the end of the buffer is
zeroed.
In practice this buffer overflow does not occur because the sysfs
max_segments file only contains an unsigned short + '\n'. The string is
always shorter than 32 bytes.
Regardless, avoid this pattern because static analysis tools might
complain and it could lead to real buffer overflows if copy-pasted
elsewhere in the codebase.
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
We want query-block to return the right filename, even if a commit job
put a bdrv_commit_top on top of the actual image format driver. Let
bdrv_commit_top.bdrv_refresh_filename get the filename from its backing
file.
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
We want query-block to return the right filename, even if a mirror job
put a bdrv_mirror_top on top of the actual image format driver. Let
bdrv_mirror_top.bdrv_refresh_filename get the filename from its backing
file.
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
In some cases, bdrv_co_get_block_status() is called recursively for the
whole backing chain. The automatically inserted bdrv_commit_top filter
driver must not stop the recursion, so implement a callback that simply
forwards the request to bs->backing.
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
This fixes bdrv_co_get_block_status() for the bdrv_mirror_top block
driver, which must fall through to bs->backing instead of bs->file.
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
If bdrv_is_allocated() fails, we should react to that failure.
For 2 of the 3 callers, reporting the error was easy. But in
cluster_was_modified() and its lone caller
get_cluster_count_for_direntry(), it's rather invasive to update
the logic to pass the error back; so there, I went with merely
documenting the issue by changing the return type to bool (in
all likelihood, treating the cluster as modified will then
trigger a read which will also fail, and eventually get to an
error - but given the appalling number of abort() calls in this
code, I'm not making it any worse).
Signed-off-by: Eric Blake <eblake@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
If bdrv_is_allocated() fails, we should immediately do the backup
error action, rather than attempting backup_do_cow() (although
that will likely fail too).
Signed-off-by: Eric Blake <eblake@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
The driver has failed to build since commit da34e65, in qemu 2.6,
due to a missing include of qapi/error.h for error_setg().
Since no one has complained in three releases, it is easier to
remove the dead code than to keep it around, especially since it
is not being built by default and therefore prone to bitrot.
Signed-off-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Max Reitz <mreitz@redhat.com>
Reviewed-by: Fam Zheng <famz@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
BlockLimits.max_transfer can be too high without this fix, guest will
encounter I/O error or even get paused with werror=stop or rerror=stop. The
cause is explained below.
Linux has a separate limit, /sys/block/.../queue/max_segments, which in
the worst case can be more restrictive than the BLKSECTGET which we
already consider (note that they are two different things). So, the
failure scenario before this patch is:
1) host device has max_sectors_kb = 4096 and max_segments = 64;
2) guest learns max_sectors_kb limit from QEMU, but doesn't know
max_segments;
3) guest issues e.g. a 512KB request thinking it's okay, but actually
it's not, because it will be passed through to host device as an
SG_IO req that has niov > 64;
4) host kernel doesn't like the segmenting of the request, and returns
-EINVAL;
This patch checks the max_segments sysfs entry for the host device and
calculates a "conservative" bytes limit using the page size, which is
then merged into the existing max_transfer limit. Guest will discover
this from the usual virtual block device interfaces. (In the case of
scsi-generic, it will be done in the INQUIRY reply interception in
device model.)
The other possibility is to actually propagate it as a separate limit,
but it's not better. On the one hand, there is a big complication: the
limit is per-LUN in QEMU PoV (because we can attach LUNs from different
host HBAs to the same virtio-scsi bus), but the channel to communicate
it in a per-LUN manner is missing down the stack; on the other hand,
two limits versus one doesn't change much about the valid size of I/O
(because guest has no control over host segmenting).
Also, the idea to fall back to bounce buffering in QEMU, upon -EINVAL,
was explored. Unfortunately there is no neat way to ensure the bounce
buffer is less segmented (in terms of DMA addr) than the guest buffer.
Practically, this bug is not very common. It is only reported on a
Emulex (lpfc), so it's okay to get it fixed in the easier way.
Reviewed-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Fam Zheng <famz@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Currently backup to nbd target is broken, as nbd doesn't have
.bdrv_get_info realization.
Signed-off-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
bdrv_set_backing_hd failure needn't be abort. Since we already have
error parameter, use it.
Signed-off-by: Fam Zheng <famz@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
We have an errp and bdrv_root_attach_child can fail permission check,
error_abort is not the best choice here.
Signed-off-by: Fam Zheng <famz@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
QAPI type SocketAddressFlat differs from SocketAddress pointlessly:
the discriminator value for variant InetSocketAddress is 'tcp' instead
of 'inet'. Rename.
The type is so far only used by the Gluster block drivers. Take care
to keep 'tcp' working in things like -drive's file.server.0.type=tcp.
The "gluster+tcp" URI scheme in pseudo-filenames stays the same.
blockdev-add changes, but it has changed incompatibly since 2.8
already.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
As its documentation says, it's not specific to Gluster. Rename it,
as I'm going to use it for something else.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
To reproduce, run
$ valgrind qemu-system-x86_64 --nodefaults -S --drive driver=gluster,volume=testvol,path=/a/b/c,server.0.type=xxx
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Niels de Vos <ndevos@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
qemu_gluster_glfs_init() passes the names of QAPI enumeration type
SocketTransport to glfs_set_volfile_server(). Works, because they
were chosen to match. But the coupling is artificial. Use the
appropriate literal strings instead.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Niels de Vos <ndevos@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
This permits configuration with driver-specific options in addition to
pseudo-filename parsed as URI. For instance,
--drive driver=sheepdog,host=fido,vdi=dolly
instead of
--drive driver=sheepdog,file=sheepdog://fido/dolly
It's also a first step towards supporting blockdev-add.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
sd_parse_uri() builds a string from host and port parts for
inet_connect(). inet_connect() parses it into host, port and options.
Whether this gets exactly the same host, port and no options for all
inputs is not obvious.
Cut out the string middleman and build a SocketAddress for
socket_connect() instead.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Kevin Wolf <kwolf@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Errors in the pseudo-filename are all reported with the same laconic
"Can't parse filename" message.
Add real error reporting, such as:
$ qemu-system-x86_64 --drive driver=sheepdog,filename=sheepdog:///
qemu-system-x86_64: --drive driver=sheepdog,filename=sheepdog:///: missing file path in URI
$ qemu-system-x86_64 --drive driver=sheepdog,filename=sheepgod:///vdi
qemu-system-x86_64: --drive driver=sheepdog,filename=sheepgod:///vdi: URI scheme must be 'sheepdog', 'sheepdog+tcp', or 'sheepdog+unix'
$ qemu-system-x86_64 --drive driver=sheepdog,filename=sheepdog+unix:///vdi?socke=sheepdog.sock
qemu-system-x86_64: --drive driver=sheepdog,filename=sheepdog+unix:///vdi?socke=sheepdog.sock: unexpected query parameters
The code to translate legacy syntax to URI fails to escape URI
meta-characters. The new error messages are misleading then. Replace
them by the old "Can't parse filename" message. "Internal error"
would be more honest. Anyway, no worse than before. Also add a FIXME
comment.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Reviewed-by: Kevin Wolf <kwolf@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
sd_parse_uri() truncates long VDI names silently. Reject them
instead.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
sd_parse_uri() and sd_snapshot_goto() screw up error checking after
strtoul(), and truncate long tag names silently. Fix by replacing
those parts by new sd_parse_snapid_or_tag(), which checks more
carefully.
sd_snapshot_delete() also parses snapshot IDs, but is currently too
broken for me to touch. Mark TODO.
Two calls of strtol() without error checking remain in
parse_redundancy(). Mark them FIXME.
More silent truncation of configuration strings remains elsewhere.
Not marked.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>