We have quite a few switches over SocketAddressKind. Some have case
labels for all enumeration values, others rely on a default label.
Some abort when the value isn't a valid SocketAddressKind, others
report an error then.
Unify as follows. Always provide case labels for all enumeration
values, to clarify intent. Abort when the value isn't a valid
SocketAddressKind, because the program state is messed up then.
Improve a few error messages while there.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Max Reitz <mreitz@redhat.com>
Message-id: 1490895797-29094-4-git-send-email-armbru@redhat.com
Signed-off-by: Max Reitz <mreitz@redhat.com>
The current websockets protocol handshake code is very relaxed, just
doing crude string searching across the HTTP header data. This causes
it to both reject valid connections and fail to reject invalid
connections. For example, according to the RFC 6455 it:
- MUST reject any method other than "GET"
- MUST reject any HTTP version less than "HTTP/1.1"
- MUST reject Connection header without "Upgrade" listed
- MUST reject Upgrade header which is not 'websocket'
- MUST reject missing Host header
- MUST treat HTTP header names as case insensitive
To do all this validation correctly requires that we fully parse the
HTTP headers, populating a data structure containing the header
fields.
After this change, we also reject any path other than '/'
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
The qio_channel_websock_read_wire() method will read upto 4096
bytes off the socket and then decode the websockets header and
payload. The code was only decoding a single websockets frame,
even if the buffered data contained multiple frames. This meant
that decoding of subsequent frames was delayed until further
input arrived on the socket. This backlog of delayed frames
gets worse & worse over time.
Symptom was that when connecting to the VNC server via the
built-in websockets server, mouse/keyboard interaction would
start out fine, but slowly get more & more delayed until it
was unusable.
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
Support separate coroutines for reading and writing, and place the
read/write handlers on the AioContext that the QIOChannel is registered
with.
Reviewed-by: Daniel P. Berrange <berrange@redhat.com>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Reviewed-by: Fam Zheng <famz@redhat.com>
Message-id: 20170213135235.12274-7-pbonzini@redhat.com
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
This is in preparation for making qio_channel_yield work on
AioContexts other than the main one.
Reviewed-by: Daniel P. Berrange <berrange@redhat.com>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Reviewed-by: Fam Zheng <famz@redhat.com>
Message-id: 20170213135235.12274-6-pbonzini@redhat.com
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
If a QIOTask has an error set and the calling code uses
qio_task_propagate_error() to steal the reference to
that Error object, the task would not clear its own
reference. This would lead to a double-free when
qio_task_free runs, if the caller had (correctly) freed
the Error object they now owned.
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
Currently DNS resolution is done automatically as part
of the creation of a QIOChannelSocket object instance.
This works ok for network clients where you just end
up a single network socket, but for servers, the results
of DNS resolution may require creation of multiple
sockets.
Introducing a DNS resolver API allows DNS resolution
to be separated from the socket object creation. This
will make it practical to create multiple QIOChannelSocket
instances for servers.
Reviewed-by: Eric Blake <eblake@redhat.com>
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
Now that task objects have a directly associated error,
there's no need for an an Error **errp parameter to
the QIOTask thread worker function. It already has a
QIOTask object, so can directly set the error on it.
Reviewed-by: Eric Blake <eblake@redhat.com>
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
Currently the QIOTaskFunc signature takes an Object * for
the source, and an Error * for any error. We also need to
be able to provide a result pointer. Rather than continue
to add parameters to QIOTaskFunc, remove the existing
ones and simply pass the QIOTask object instead. This
has methods to access all the other data items required
in the callback impl.
Reviewed-by: Eric Blake <eblake@redhat.com>
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
Currently when a task fails, the error is never explicitly
associated with the task object, it is just passed along
through the completion callback. This adds the ability to
explicitly associate an error with the task.
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
Currently there is no data associated with a successful
task completion. This adds an opaque pointer to the task
to store an arbitrary result.
Reviewed-by: Eric Blake <eblake@redhat.com>
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
Incrementing the reference in qio_task_get_source is
not necessary, since we're not running concurrently
with any other code touching the QIOTask. This
minimizes chances of further memory leaks.
Reviewed-by: Eric Blake <eblake@redhat.com>
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
The GSource object has ability to have a name, which is useful
when debugging performance problems with the mainloop event
callbacks that take too long. By associating a name with a
QIOChannel object, we can then set the name on any GSource
associated with the channel.
Reviewed-by: Eric Blake <eblake@redhat.com>
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
The SO_ACCEPTCONN ioctl is not portable across OS, with
some BSD versions and OS-X not supporting it. There is
no viable alternative to this, so instead just set the
feature explicitly when creating a listener socket.
The current users of qio_channel_socket_new_fd() won't
ever be given a listening socket, so there's no problem
with no auto-detecting it in this scenario
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
Testing QIOChannel feature support can be done with a helper called
qio_channel_has_feature(). Setting feature support, however, was
done manually with a logical OR. This patch introduces a new helper
called qio_channel_set_feature() and makes use of it where applicable.
Signed-off-by: Felipe Franciosi <felipe@nutanix.com>
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
Parts of the code have been testing QIOChannel features directly with a
logical AND. This patch makes it all consistent by using the
qio_channel_has_feature() function to test if a feature is present.
Signed-off-by: Felipe Franciosi <felipe@nutanix.com>
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
When QIOChannels were introduced in 666a3af9, the feature bits were
already defined shifted. However, when using them, the code was shifting
them again. The incorrect use was consistent until 74b6ce43, where
QIO_CHANNEL_FEATURE_LISTEN was defined shifted but tested unshifted.
This patch changes the definition to be unshifted and fixes the
incorrect usage introduced on 74b6ce43.
Signed-off-by: Felipe Franciosi <felipe@nutanix.com>
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
The trace points for util/buffer.c were mistakenly put
in the io/trace-events file, instead of util/trace-events
in
commit 892bd32ea3
Author: Daniel P. Berrange <berrange@redhat.com>
Date: Thu Jun 16 09:39:50 2016 +0100
trace: split out trace events for io/ directory
Move all trace-events for files in the io/ directory to
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Message-id: 1473872624-23285-2-git-send-email-berrange@redhat.com
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
The QTask struct is just a standalone struct, not a QOM Object,
so calling object_ref() on it is not appropriate. This results
in mangling the 'destroy' field in the QTask struct, causing
the later call to qtask_free() to try to call the function
at address 0x1, with predictably segfault happy results.
There is in fact no need for ref counting with QTask, as the
call to qtask_abort() or qtask_complete() will automatically
free associated memory.
This fixes the crash shown in
https://bugs.launchpad.net/qemu/+bug/1589923
Reviewed-by: Eric Blake <eblake@redhat.com>
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
In practice the entry argument is always known at creation time, and
it is confusing that sometimes qemu_coroutine_enter is used with a
non-NULL argument to re-enter a coroutine (this happens in
block/sheepdog.c and tests/test-coroutine.c). So pass the opaque value
at creation time, for consistency with e.g. aio_bh_new.
Mostly done with the following semantic patch:
@ entry1 @
expression entry, arg, co;
@@
- co = qemu_coroutine_create(entry);
+ co = qemu_coroutine_create(entry, arg);
...
- qemu_coroutine_enter(co, arg);
+ qemu_coroutine_enter(co);
@ entry2 @
expression entry, arg;
identifier co;
@@
- Coroutine *co = qemu_coroutine_create(entry);
+ Coroutine *co = qemu_coroutine_create(entry, arg);
...
- qemu_coroutine_enter(co, arg);
+ qemu_coroutine_enter(co);
@ entry3 @
expression entry, arg;
@@
- qemu_coroutine_enter(qemu_coroutine_create(entry), arg);
+ qemu_coroutine_enter(qemu_coroutine_create(entry, arg));
@ reentry @
expression co;
@@
- qemu_coroutine_enter(co, NULL);
+ qemu_coroutine_enter(co);
except for the aforementioned few places where the semantic patch
stumbled (as expected) and for test_co_queue, which would otherwise
produce an uninitialized variable warning.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Reviewed-by: Fam Zheng <famz@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Rather than rolling our own clone via an expensive conversion
in and back out of QObject, use the new clone visitor.
Signed-off-by: Eric Blake <eblake@redhat.com>
Message-Id: <1465490926-28625-15-git-send-email-eblake@redhat.com>
Reviewed-by: Markus Armbruster <armbru@redhat.com>
Signed-off-by: Markus Armbruster <armbru@redhat.com>
qemu leaves unix socket files behind when removing a listening chardev
or leaving. qemu could clean that up, even if doing so isn't race-free.
Fixes:
https://bugzilla.redhat.com/show_bug.cgi?id=1347077
Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Message-Id: <1466105332-10285-4-git-send-email-marcandre.lureau@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Move all trace-events for files in the io/ directory to
their own file.
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
Message-id: 1466066426-16657-5-git-send-email-berrange@redhat.com
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
The QIOChannelBuffer's close implementation will free
the internal data buffer. It failed to reset the pointer
to NULL though, so when the object is later finalized
it will free it a second time with predictable crash.
Reviewed-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
Reviewed-by: Juan Quintela <quintela@redhat.com>
Message-Id: <1461751518-12128-3-git-send-email-berrange@redhat.com>
Signed-off-by: Amit Shah <amit.shah@redhat.com>
Move it to the actual users. There are still a few includes of
qemu/bswap.h in headers; removing them is left for future work.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Commit 57cb38b included qapi/error.h into qemu/osdep.h to get the
Error typedef. Since then, we've moved to include qemu/osdep.h
everywhere. Its file comment explains: "To avoid getting into
possible circular include dependencies, this file should not include
any other QEMU headers, with the exceptions of config-host.h,
compiler.h, os-posix.h and os-win32.h, all of which are doing a
similar job to this file and are under similar constraints."
qapi/error.h doesn't do a similar job, and it doesn't adhere to
similar constraints: it includes qapi-types.h. That's in excess of
100KiB of crap most .c files don't actually need.
Add the typedef to qemu/typedefs.h, and include that instead of
qapi/error.h. Include qapi/error.h in .c files that need it and don't
get it now. Include qapi-types.h in qom/object.h for uint16List.
Update scripts/clean-includes accordingly. Update it further to match
reality: replace config.h by config-target.h, add sysemu/os-posix.h,
sysemu/os-win32.h. Update the list of includes in the qemu/osdep.h
comment quoted above similarly.
This reduces the number of objects depending on qapi/error.h from "all
of them" to less than a third. Unfortunately, the number depending on
qapi-types.h shrinks only a little. More work is needed for that one.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
[Fix compilation without the spice devel packages. - Paolo]
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Now that QEMU wraps the Win32 sockets methods to automatically
set errno upon failure, there is no reason for callers to use
the socket_error() method. They can rely on accessing errno
even on Win32. Remove all use of socket_error() from general
code, leaving it as a static method in oslib-win32.c only.
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
On Win32 we cannot directly poll on socket handles. Instead we
create a Win32 event object and associate the socket handle with
the event. When the event signals readyness we then have to
use select to determine which events are ready. Creating Win32
events is moderately heavyweight, so we don't want todo it
every time we create a GSource, so this associates a single
event with a QIOChannel.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
Since we now canonicalize WSAEWOULDBLOCK into EAGAIN there is
no longer any need to explicitly check EWOULDBLOCK for Win32.
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
The QIOChannelSocket code mistakenly uses the bare accept()
function which does not set SOCK_CLOEXEC.
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
Sockets are not in the same namespace as file descriptors on Windows.
As an initial step, introduce separate APIs for file descriptor and
socket watches.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
s/write/read/ in the error message reported after
readmsg() fails
Reviewed-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
Clean up includes so that osdep.h is included first and headers
which it implies are not included manually.
This commit was created with scripts/clean-includes.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Eric Blake <eblake@redhat.com>
The QIOChannelBuffer struct uses a 'char *' for its data
buffer. It will give simpler type compatibility with the
migration APIs if it uses 'uint8_t *' instead, avoiding
several casts.
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
Depending on what object a file descriptor refers to a different
type of IO channel will be needed - either a QIOChannelFile or
a QIOChannelSocket. Introduce a qio_channel_new_fd() method
which will return the appropriate channel implementation.
Reviewed-by: Eric Blake <eblake@redhat.com>
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
Two wrongs make a right, but they should be fixed anyway.
Cc: Daniel P. Berrange <berrange@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Message-Id: <1455015557-15106-1-git-send-email-pbonzini@redhat.com>
Clean up includes so that osdep.h is included first and headers
which it implies are not included manually.
This commit was created with scripts/clean-includes.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Message-id: 1454089805-5470-14-git-send-email-peter.maydell@linaro.org
Some versions of GCC on OS-X complain about CMSG_SPACE
not being constant size, which prevents use of { 0 }
io/channel-socket.c: In function 'qio_channel_socket_writev':
io/channel-socket.c:497:18: error: variable-sized object may not be initialized
char control[CMSG_SPACE(sizeof(int) * SOCKET_MAX_FDS)] = { 0 };
The compiler is at fault here, but it is nicer to avoid
tickling this compiler bug by using memset instead.
Reviewed-By: John Arbuckle <programmingkidx@gmail.com>
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
The /dev/null file handle was leaked in a couple of places.
There is also the possibility that both readfd and writefd
point to the same /dev/null file handle, so care must be
taken not to close the same file handle twice.
Reviewed-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
When killing the subcommand, it is intended to first send
SIGTERM, then SIGKILL and only report an error if it still
doesn't die after SIGKILL. The 'step' counter was not
being incremented though, so the code never got past the
SIGTERM stage.
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
When reporting the number of FDs has been exceeded, pass
EINVAL to error_setg_errno, rather than -EINVAL.
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
When sending file descriptors over a socket, we have to
allocate a data buffer to hold the FDs in the scmsghdr.
Unfortunately we allocated the buffer on the stack inside
an if () {} block, but called sendmsg() outside the block.
So the stack bytes holding the FDs were liable to be
overwritten with other data. By luck this was not a problem
when sending 1 FD, but if sending 2 or more then it would
fail.
The fix is to simply move the variables outside the nested
'if' block. To keep valgrind quiet we also zero-initialize
the 'control' buffer.
Reviewed-by: Eric Blake <eblake@redhat.com>
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
The QIO_CHANNEL_FEATURE_FD_PASS feature flag is set in the
qio_channel_socket_set_fd() method, however, this only deals
with client side connections.
To ensure server side connections also have the feature flag
set, we must set it in qio_channel_socket_accept() too. This
also highlighted a typo fix where the code updated the
sockaddr struct in the wrong object instance.
Reviewed-by: Eric Blake <eblake@redhat.com>
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
Add a QIOChannel subclass that is capable of performing I/O
to/from a memory buffer. This implementation does not attempt
to support concurrent readers & writers. It is designed for
serialized access where by a single thread at a time may write
data, seek and then read data back out.
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
Add a QIOChannel subclass that is capable of performing I/O
to/from a separate process, via a pair of pipes. The command
can be used for unidirectional or bi-directional I/O.
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
Add a QIOChannel subclass that can run the websocket protocol over
the top of another QIOChannel instance. This initial implementation
is only capable of acting as a websockets server. There is no support
for acting as a websockets client yet.
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
Add a QIOChannel subclass that can run the TLS protocol over
the top of another QIOChannel instance. The object provides a
simplified API to perform the handshake when starting the TLS
session. The layering of TLS over the underlying channel does
not have to be setup immediately. It is possible to take an
existing QIOChannel that has done some handshake and then swap
in the QIOChannelTLS layer. This allows for use with protocols
which start TLS right away, and those which start plain text
and then negotiate TLS.
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>