Add a parameter for dirty gfn count for dirty rings. If zero, dirty ring is
disabled. Otherwise dirty ring will be enabled with the per-vcpu gfn count as
specified. If dirty ring cannot be enabled due to unsupported kernel or
illegal parameter, it'll fallback to dirty logging.
By default, dirty ring is not enabled (dirty-gfn-count default to 0).
Signed-off-by: Peter Xu <peterx@redhat.com>
Message-Id: <20210506160549.130416-9-peterx@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Cache it too because we'll reference it more frequently in the future.
Reviewed-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Signed-off-by: Peter Xu <peterx@redhat.com>
Message-Id: <20210506160549.130416-8-peterx@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
kvm_physical_sync_dirty_bitmap() on the whole section is inaccurate, because
the section can be a superset of the memslot that we're working on. The result
is that if the section covers multiple kvm memslots, we could be doing the
synchronization for multiple times for each kvmslot in the section.
With the two helpers that we just introduced, it's very easy to do it right now
by calling the helpers.
Signed-off-by: Peter Xu <peterx@redhat.com>
Message-Id: <20210506160549.130416-7-peterx@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
kvm_physical_sync_dirty_bitmap() calculates the ramblock offset in an
awkward way from the MemoryRegionSection that passed in from the
caller. The truth is for each KVMSlot the ramblock offset never
change for the lifecycle. Cache the ramblock offset for each KVMSlot
into the structure when the KVMSlot is created.
With that, we can further simplify kvm_physical_sync_dirty_bitmap()
with a helper to sync KVMSlot dirty bitmap to the ramblock dirty
bitmap of a specific KVMSlot.
Reviewed-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Signed-off-by: Peter Xu <peterx@redhat.com>
Message-Id: <20210506160549.130416-6-peterx@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Provide a helper kvm_slot_get_dirty_log() to make the function
kvm_physical_sync_dirty_bitmap() clearer. We can even cache the as_id
into KVMSlot when it is created, so that we don't even need to pass it
down every time.
Since at it, remove return value of kvm_physical_sync_dirty_bitmap()
because it should never fail.
Signed-off-by: Peter Xu <peterx@redhat.com>
Message-Id: <20210506160549.130416-5-peterx@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Previously we have two places that will create the per KVMSlot dirty
bitmap:
1. When a newly created KVMSlot has dirty logging enabled,
2. When the first log_sync() happens for a memory slot.
The 2nd case is lazy-init, while the 1st case is not (which is a fix
of what the 2nd case missed).
To do explicit initialization of dirty bitmaps, what we're missing is
to create the dirty bitmap when the slot changed from not-dirty-track
to dirty-track. Do that in kvm_slot_update_flags().
With that, we can safely remove the 2nd lazy-init.
This change will be needed for kvm dirty ring because kvm dirty ring
does not use the log_sync() interface at all.
Also move all the pre-checks into kvm_slot_init_dirty_bitmap().
Reviewed-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Signed-off-by: Peter Xu <peterx@redhat.com>
Message-Id: <20210506160549.130416-4-peterx@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Per-kml slots_lock will bring some trouble if we want to take all slots_lock of
all the KMLs, especially when we're in a context that we could have taken some
of the KML slots_lock, then we even need to figure out what we've taken and
what we need to take.
Make this simple by merging all KML slots_lock into a single slots lock.
Per-kml slots_lock isn't anything that helpful anyway - so far only x86 has two
address spaces (so, two slots_locks). All the rest archs will be having one
address space always, which means there's actually one slots_lock so it will be
the same as before.
Signed-off-by: Peter Xu <peterx@redhat.com>
Message-Id: <20210506160549.130416-3-peterx@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Some of the memory listener may want to do log synchronization without
being able to specify a range of memory to sync but always globally.
Such a memory listener should provide this new method instead of the
log_sync() method.
Obviously we can also achieve similar thing when we put the global
sync logic into a log_sync() handler. However that's not efficient
enough because otherwise memory_global_dirty_log_sync() may do the
global sync N times, where N is the number of flat ranges in the
address space.
Make this new method be exclusive to log_sync().
Reviewed-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Signed-off-by: Peter Xu <peterx@redhat.com>
Message-Id: <20210506160549.130416-2-peterx@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
The qtest server right now can only be created using the -qtest
and -qtest-log options. Allow an alternative way to create it
using "-object qtest,chardev=...,log=...".
This is part of the long term plan to make more (or all) of
QEMU configurable through QMP and preconfig mode.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Creating and destroying QOM objects does not require a fully constructed
machine. Allow running object-add and object-del before machine
initialization has concluded.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Expose AVX (VEX-encoded) versions of the Vector Neural Network
Instructions to guest.
The bit definition:
CPUID.(EAX=7,ECX=1):EAX[bit 4] AVX_VNNI
The following instructions are available when this feature is
present in the guest.
1. VPDPBUS: Multiply and Add Unsigned and Signed Bytes
2. VPDPBUSDS: Multiply and Add Unsigned and Signed Bytes with Saturation
3. VPDPWSSD: Multiply and Add Signed Word Integers
4. VPDPWSSDS: Multiply and Add Signed Integers with Saturation
As for the kvm related code, please reference Linux commit id 1085a6b585d7.
The release document ref below link:
https://software.intel.com/content/www/us/en/develop/download/\
intel-architecture-instruction-set-extensions-programming-reference.html
Signed-off-by: Yang Zhong <yang.zhong@intel.com>
Message-Id: <20210407015609.22936-1-yang.zhong@intel.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Per the kconfig.rst:
A device should be listed [...] ``imply`` if (depending on
the QEMU command line) the board may or may not be started
without it.
This is the case with the NVDIMM device, so use the 'imply'
weak reverse dependency to select the symbol.
Signed-off-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Message-Id: <20210511155354.3069141-2-philmd@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Do not guard each assignment with a check for --with-git-submodules=ignore.
To avoid a confusing "GIT" line from the Makefile, guard the git-submodule-update
recipe so that it is empty when --with-git-submodules=ignore.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Right now --with-git-submodules=ignore has a subtle difference from
just running without a .git directory, in that it does not check
that submodule sources actually exist. Move the check for
ui/keycodemapdb/README so that it happens even if the user
specified --with-git-submodules=ignore, with a customized
error message that is more suitable for this situation.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Message-Id: <20210512045821.3257963-1-philmd@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
The variable outport_present is a flag to show if the outport
subsection was loaded. Clear the outport_present flag in the
outer pre_load() function. This method is recommended in the QEMU
manual for developers in the chapter "Migration, Subsections".
Signed-off-by: Volker Rümelin <vr_qemu@t-online.de>
Message-Id: <20210525181441.27768-12-vr_qemu@t-online.de>
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
In 2005 the author of commit daa579632d "PS2 mouse and keyboard
separation (Paul Brook)" and 0e43e99c04 "PS2 mouse and keyboard
separation (Paul Brook)" separated the PS/2 controller code and
the PS/2 keyboard and mouse code. It seems he forgot to remove
a few defines. Remove them now.
Signed-off-by: Volker Rümelin <vr_qemu@t-online.de>
Message-Id: <20210525181441.27768-11-vr_qemu@t-online.de>
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Currently the PS/2 controller command KBD_CCMD_MOUSE_DISABLE
doesn't disable the PS/2 mouse communication at all, and the
PS/2 controller commands KBD_CCMD_KBD_DISABLE and
KBD_CCMD_KBD_ENABLE only disable and enable the keyboard
interrupt, which is very different from what a real PS/2
controller does. A guest may notice the difference.
Mask out pending data on disabled queues to correctly disable
the PS/2 controller communication.
Signed-off-by: Volker Rümelin <vr_qemu@t-online.de>
Message-Id: <20210525181441.27768-10-vr_qemu@t-online.de>
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Replace reads of the variable s->pending with a call to a new
function kbd_pending() to ease the review of the next patch.
There is no functional change.
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Signed-off-by: Volker Rümelin <vr_qemu@t-online.de>
Message-Id: <20210525181441.27768-9-vr_qemu@t-online.de>
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Add a separate queue for PS/2 controller responses. The
responses no longer get queued in the keyboard or mouse queues.
The advantage of this can be seen after the next two patches,
where the guest can disable the PS/2 communication with keyboard
and mouse and still talk to the PS/2 controller.
Signed-off-by: Volker Rümelin <vr_qemu@t-online.de>
Message-Id: <20210525181441.27768-8-vr_qemu@t-online.de>
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Currently there is only one flag to distinguish between two
interrupt sources and there are no available flags for more
sources. Add an internal state variable to store the interrupt
source. The next patch will introduce an additional interrupt
source. There is no functional change.
Signed-off-by: Volker Rümelin <vr_qemu@t-online.de>
Message-Id: <20210525181441.27768-7-vr_qemu@t-online.de>
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Limit the keyboard data rate to the serial link speed. Some old
DOS software relies on being able to read an incoming scan-code
more than once. After reading keyboard data from the i8042
controller, the guest software has 1ms to read the same data
again.
Use -global i8042.kbd-throttle=on to enable this feature.
To see how this patch works, start a FreeDOS 1.2 guest with the
qemu option -global i8042.kbd-throttle=on and open a text file
with the vim 7.3 32 bit for DOS executable. Then use the cursor
keys (not the cursor keys on the numeric keypad) to move through
the text. Without the kbd-throttle option enabled each keystroke
will move the cursor two positions.
Buglink: https://bugs.launchpad.net/bugs/1895363
Buglink: https://bugs.launchpad.net/bugs/1897568
Signed-off-by: Volker Rümelin <vr_qemu@t-online.de>
Message-Id: <20210525181441.27768-6-vr_qemu@t-online.de>
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Split out the interrupt line changing code from kbd_update_irq().
This is a preparation for the next patch. There is no functional
change.
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Signed-off-by: Volker Rümelin <vr_qemu@t-online.de>
Message-Id: <20210525181441.27768-4-vr_qemu@t-online.de>
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Don't deassert the irq twice if the queue is empty. While the
second deassertion doesn't do any harm, it's unnecessary.
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Signed-off-by: Volker Rümelin <vr_qemu@t-online.de>
Message-Id: <20210525181441.27768-3-vr_qemu@t-online.de>
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
ps2_queue() behaves differently than the very similar functions
ps2_queue_2() to ps2_queue_4(). The first one calls update_irq()
even if the queue is full, the others don't. Change ps2_queue()
to be consistent with the others.
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Signed-off-by: Volker Rümelin <vr_qemu@t-online.de>
Message-Id: <20210525181441.27768-2-vr_qemu@t-online.de>
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Commit 7abe7eb294 "ps2: Fix mouse stream corruption due to lost data"
added code to avoid mouse stream corruptions but the calculation of
the needed free queue size was wrong. Fix this.
To reproduce, open a text file with the vim 7.3 32 bit for DOS exe-
cutable in a FreeDOS client started with -display sdl and move the
mouse around for a few seconds. You will quickly see erratic mouse
movements and unexpected mouse clicks. CuteMouse (ctmouse.exe) in
FreeDOS doesn't try to re-sync the mouse stream.
Fixes: 7abe7eb294 ("ps2: Fix mouse stream corruption due to lost data")
Signed-off-by: Volker Rümelin <vr_qemu@t-online.de>
Message-Id: <20210525181441.27768-1-vr_qemu@t-online.de>
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
It is interesting to know if the PS2 keyboard is in translated mode, and
which of the three scancode sets are in use.
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
Message-Id: <20210309155804.306051-1-berrange@redhat.com>
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Added a table-like output which contains the total number of calls
for each used syscall along with the number of errors that occurred.
Per-call tracing is still available through supplying the argument
``print`` to the plugin.
Signed-off-by: Mahmoud Mandour <ma.mandourr@gmail.com>
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Message-Id: <20210519032409.3041-1-ma.mandourr@gmail.com>
Message-Id: <20210520174303.12310-9-alex.bennee@linaro.org>
In theory we don't need an actual record/replay to enact reverse
debugging on a purely deterministic system (i.e one with no external
inputs running under icount). Tidy away the logic into a little
function.
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Message-Id: <20210520174303.12310-8-alex.bennee@linaro.org>
This is not a 32 bit number, it can (and most likely will) be quite a
big one.
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: Pavel Dovgalyuk <Pavel.Dovgalyuk@ispras.ru>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Message-Id: <20210520174303.12310-7-alex.bennee@linaro.org>
Instead of jumping through hoops let glib deal with both tracking the
number of elements and auto freeing the memory once we are done. This
allows is to drop the usage of ALLOCA(3) which the man-page mentions
its "use is discouraged".
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Message-Id: <20210520174303.12310-6-alex.bennee@linaro.org>
The hexagon container is always manually built but of course not
everyone will be building it themselves and pushing to their
registries. We still need to create a "local" registry copy for the
actual gitlab tests to run. We don't build it in this case, just pull
it across from the upstream registry. We disable this rule from
running on the qemu-project itself so it doesn't accidentally wipe out
our master copy.
Fixes: 910c40ee94 ("gitlab: add build-user-hexagon test")
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Tested-by: Cornelia Huck <cohuck@redhat.com>
Reviewed-by: Willian Rampazzo <willianr@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Cc: Cornelia Huck <cohuck@redhat.com>
Message-Id: <20210520174303.12310-4-alex.bennee@linaro.org>
Disable I8MM again for !have_neon during realize.
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20210525010358.152808-93-richard.henderson@linaro.org
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20210525010358.152808-92-richard.henderson@linaro.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
This is {S,U,US}MMLA for both AArch64 AdvSIMD and SVE,
and V{S,U,US}MMLA.S8 for AArch32 NEON.
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20210525010358.152808-91-richard.henderson@linaro.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20210525010358.152808-90-richard.henderson@linaro.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Now that we have a common helper, sharing decode does not
save much. Also, this will solve an upcoming naming problem.
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20210525010358.152808-89-richard.henderson@linaro.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Split out a helper that can handle the 4-register
format for helpers shared with SVE.
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20210525010358.152808-88-richard.henderson@linaro.org
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
We were extracting the M register twice, once incorrectly
as M:vm and once correctly as rm. Remove the incorrect
name and remove the incorrect decode.
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20210525010358.152808-87-richard.henderson@linaro.org
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Cut and paste error from another pattern.
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20210525010358.152808-86-richard.henderson@linaro.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Split out a helper that can handle the 4-register
format for helpers shared with SVE.
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20210525010358.152808-85-richard.henderson@linaro.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20210525010358.152808-84-richard.henderson@linaro.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Implements both vectored and indexed FMLALB, FMLALT, FMLSLB, FMLSLT
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Stephen Long <steplong@quicinc.com>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20210525010358.152808-83-richard.henderson@linaro.org
Message-Id: <20200504171240.11220-1-steplong@quicinc.com>
[rth: Rearrange to use float16_to_float32_by_bits.]
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
We have two copies of these, one set of which is not complete.
Move them to a common header.
Suggested-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20210525010358.152808-82-richard.henderson@linaro.org
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
