In addition to making the code simpler, this will replace the
long error messages:
cannot initialize crypto: Unable to initialize GNUTLS library: [...]
cannot initialize crypto: Unable to initialize gcrypt
with shorter messages:
Unable to initialize GNUTLS library: [...]
Unable to initialize gcrypt
Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
When converting images, check the block status of its backing file chain
to avoid needlessly reading zeros.
Signed-off-by: Ren Kimura <rkx1209dev@gmail.com>
Message-id: 1461773098-20356-1-git-send-email-rkx1209dev@gmail.com
Signed-off-by: Max Reitz <mreitz@redhat.com>
Sector-based blk_write() should die; switch to byte-based
blk_pwrite() instead. Likewise for blk_read().
Signed-off-by: Eric Blake <eblake@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Sector-based blk_write() should die; convert the one-off
variant blk_write_zeroes() to use an offset/count interface
instead. Likewise for blk_co_write_zeroes() and
blk_aio_write_zeroes().
Signed-off-by: Eric Blake <eblake@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
qemu_opts_foreach() runs its callback with the error location set to
the option's location. Any errors the callback reports use the
option's location automatically.
Commit 90998d5 moved the actual error reporting from "inside"
qemu_opts_foreach() to after it. Here's a typical hunk:
if (qemu_opts_foreach(qemu_find_opts("object"),
- object_create,
- object_create_initial, NULL)) {
+ user_creatable_add_opts_foreach,
+ object_create_initial, &err)) {
+ error_report_err(err);
exit(1);
}
Before, object_create() reports from within qemu_opts_foreach(), using
the option's location. Afterwards, we do it after
qemu_opts_foreach(), using whatever location happens to be current
there. Commonly a "none" location.
This is because Error objects don't have location information.
Problematic.
Reproducer:
$ qemu-system-x86_64 -nodefaults -display none -object secret,id=foo,foo=bar
qemu-system-x86_64: Property '.foo' not found
Note no location. This commit restores it:
qemu-system-x86_64: -object secret,id=foo,foo=bar: Property '.foo' not found
Note that the qemu_opts_foreach() bug just fixed could mask the bug
here: if the location it leaves dangling hasn't been clobbered, yet,
it's the correct one.
Reported-by: Eric Blake <eblake@redhat.com>
Cc: Daniel P. Berrange <berrange@redhat.com>
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Message-Id: <1461767349-15329-4-git-send-email-armbru@redhat.com>
Reviewed-by: Daniel P. Berrange <berrange@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
[Paragraph on Error added to commit message]
Any programs which call the qcrypto APIs should ensure that
qcrypto_init() has been called before anything else which
can use crypto. Essentially this means right at the start
of the main method before initializing anything else.
This is important because some versions of gnutls/gcrypt
require explicit initialization before use.
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
Reviewed-by: Alex Bligh <alex@alex.org.uk>
Tested-by: Alex Bligh <alex@alex.org.uk>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
The error_reportf_err() will not automatically append a
': ' before adding its suffix, so we must include that
in the message we pass it, otherwise we get a badly
formatted message lacking whitespace:
qemu-img: Could not open 'driver=nbd,host=127.0.0.1,port=6666,tls-creds=tls0'Failed to connect socket: Connection refused
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
When passing -S 0 to qemu-img convert, the target image is supposed to
be fully allocated. Right now, this is not the case if the source image
contains areas which bdrv_get_block_status() reports as being zero.
This patch changes a zeroed area's status from BLK_ZERO to BLK_DATA
before invoking convert_write() if -S 0 has been specified. In addition,
the check whether convert_read() actually needs to do anything
(basically only if the current area is a BLK_DATA area) is pulled out of
that function to the caller.
If -S 0 has been specified, zeroed areas need to be written as data to
the output, thus they then have to be accounted when calculating the
progress made.
This patch changes the reference output for iotest 122; contrary to what
it assumed, -S 0 really should allocate everything in the output, not
just areas that are filled with zeros (as opposed to being zeroed).
Signed-off-by: Max Reitz <mreitz@redhat.com>
Reviewed-by: Fam Zheng <famz@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
The previous patches have successively made blk->enable_write_cache the
true source for the information whether a writethrough mode must be
implemented. The corresponding BDRV_O_CACHE_WB is only useless baggage
we're carrying around, so now's the time to remove it.
At the same time, we remove the 'cache.writeback' option parsing on the
BDS level as the only effect was setting the BDRV_O_CACHE_WB flag.
This change requires test cases that explicitly enabled the option to
drop it. Other than that and the change of the error message when
writethrough is enabled on the BDS level (from "Can't set writethrough
mode" to "doesn't support the option"), there should be no change in
behaviour.
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Reviewed-by: Max Reitz <mreitz@redhat.com>
It always only set the BDRV_O_CACHE_WB flag, which is going to go away.
In order to make the next changes more local for better reviewability
this patches expands the macro.
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Reviewed-by: Max Reitz <mreitz@redhat.com>
The qemu-img/qemu-io tools prompt for disk encryption passwords
regardless of whether any are actually required. Adding a check
on bdrv_key_required() avoids this prompt for disk formats which
have been converted to the QCryptoSecret APIs.
This is just a temporary hack to ensure the block I/O tests
continue to work after each patch, since the last patch will
completely delete all the password prompting code.
Reviewed-by: Eric Blake <eblake@redhat.com>
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
When opening an image it is useful to know whether the caller
intends to perform I/O on the image or not. In the case of
encrypted images this will allow the block driver to avoid
having to prompt for decryption keys when we merely want to
query header metadata about the image. eg qemu-img info
This flag is enforced at the top level only, since even if
we don't want todo I/O on the 'qcow2' file payload, the
underlying 'file' driver will still need todo I/O to read
the qcow2 header, for example.
Reviewed-by: Eric Blake <eblake@redhat.com>
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Move declarations out of qemu-common.h for functions declared in
utils/ files: e.g. include/qemu/path.h for utils/path.c.
Move inline functions out of qemu-common.h and into new files (e.g.
include/qemu/bcd.h)
Signed-off-by: Veronia Bahaa <veroniabahaa@gmail.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Commit 57cb38b included qapi/error.h into qemu/osdep.h to get the
Error typedef. Since then, we've moved to include qemu/osdep.h
everywhere. Its file comment explains: "To avoid getting into
possible circular include dependencies, this file should not include
any other QEMU headers, with the exceptions of config-host.h,
compiler.h, os-posix.h and os-win32.h, all of which are doing a
similar job to this file and are under similar constraints."
qapi/error.h doesn't do a similar job, and it doesn't adhere to
similar constraints: it includes qapi-types.h. That's in excess of
100KiB of crap most .c files don't actually need.
Add the typedef to qemu/typedefs.h, and include that instead of
qapi/error.h. Include qapi/error.h in .c files that need it and don't
get it now. Include qapi-types.h in qom/object.h for uint16List.
Update scripts/clean-includes accordingly. Update it further to match
reality: replace config.h by config-target.h, add sysemu/os-posix.h,
sysemu/os-win32.h. Update the list of includes in the qemu/osdep.h
comment quoted above similarly.
This reduces the number of objects depending on qapi/error.h from "all
of them" to less than a third. Unfortunately, the number depending on
qapi-types.h shrinks only a little. More work is needed for that one.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
[Fix compilation without the spice devel packages. - Paolo]
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Before this patch, blk_new() automatically assigned a name to the new
BlockBackend and considered it referenced by the monitor. This patch
removes the implicit monitor_add_blk() call from blk_new() (and
consequently the monitor_remove_blk() call from blk_delete(), too) and
thus blk_new() (and related functions) no longer take a BB name
argument.
In fact, there is only a single point where blk_new()/blk_new_open() is
called and the new BB is monitor-owned, and that is in blockdev_init().
Besides thus relieving us from having to invent names for all of the BBs
we use in qemu-img, this fixes a bug where qemu cannot create a new
image if there already is a monitor-owned BB named "image".
If a BB and its BDS tree are created in a single operation, as of this
patch the BDS tree will be created before the BB is given a name
(whereas it was the other way around before). This results in minor
change to the output of iotest 087, whose reference output is amended
accordingly.
Signed-off-by: Max Reitz <mreitz@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Not particularly important since qemu-img exits immediately after
calling img_rebase, but easily fixed. Coverity says thanks.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Reviewed-by: Alberto Garcia <berto@igalia.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Currently qemu-img allows an image filename to be passed on the
command line, but unless using the JSON format, it does not have
a way to set any options except the format eg
qemu-img info https://127.0.0.1/images/centos7.iso
This adds a --image-opts arg that indicates that the positional
filename should be interpreted as a full option string, not
just a filename.
qemu-img info --image-opts driver=https,url=https://127.0.0.1/images,sslverify=off
This flag is mutually exclusive with the '-f' / '-F' flags.
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Allow creation of user creatable object types with qemu-img
via a new --object command line arg. This will be used to supply
passwords and/or encryption keys to the various block driver
backends via the recently added 'secret' object type.
# printf letmein > mypasswd.txt
# qemu-img info --object secret,id=sec0,file=mypasswd.txt \
...other info args...
Reviewed-by: Eric Blake <eblake@redhat.com>
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Commit 16b0d555 introduced an issue where we are not initializing
has_filename for the 'next' MapEntry object, which leads to interesting
errors in both Valgrind and Clang -fsanitize=undefined.
Zero the stack object at allocation AND make sure the utility to
populate the fields properly marks has_filename as false if applicable.
Signed-off-by: John Snow <jsnow@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
This converts the NBD block driver client to use the QIOChannelSocket
class for initial connection setup. The NbdClientSession struct has
two pointers, one to the master QIOChannelSocket providing the raw
data channel, and one to a QIOChannel which is the current channel
used for I/O. Initially the two point to the same object, but when
TLS support is added, they will point to different objects.
The qemu-img & qemu-io tools now need to use MODULE_INIT_QOM to
ensure the QIOChannel object classes are registered. The qemu-nbd
tool already did this.
In this initial conversion though, all I/O is still actually done
using the raw POSIX sockets APIs.
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
Message-Id: <1455129674-17255-4-git-send-email-berrange@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
JSON uses "name":value, but many of our visitor interfaces were
called with visit_type_FOO(v, &value, name, errp). This can be
a bit confusing to have to mentally swap the parameter order to
match JSON order. It's particularly bad for visit_start_struct(),
where the 'name' parameter is smack in the middle of the
otherwise-related group of 'obj, kind, size' parameters! It's
time to do a global swap of the parameter ordering, so that the
'name' parameter is always immediately after the Visitor argument.
Additional reason in favor of the swap: the existing include/qjson.h
prefers listing 'name' first in json_prop_*(), and I have plans to
unify that file with the qapi visitors; listing 'name' first in
qapi will minimize churn to the (admittedly few) qjson.h clients.
Later patches will then fix docs, object.h, visitor-impl.h, and
those clients to match.
Done by first patching scripts/qapi*.py by hand to make generated
files do what I want, then by running the following Coccinelle
script to affect the rest of the code base:
$ spatch --sp-file script `git grep -l '\bvisit_' -- '**/*.[ch]'`
I then had to apply some touchups (Coccinelle insisted on TAB
indentation in visitor.h, and botched the signature of
visit_type_enum() by rewriting 'const char *const strings[]' to
the syntactically invalid 'const char*const[] strings'). The
movement of parameters is sufficient to provoke compiler errors
if any callers were missed.
// Part 1: Swap declaration order
@@
type TV, TErr, TObj, T1, T2;
identifier OBJ, ARG1, ARG2;
@@
void visit_start_struct
-(TV v, TObj OBJ, T1 ARG1, const char *name, T2 ARG2, TErr errp)
+(TV v, const char *name, TObj OBJ, T1 ARG1, T2 ARG2, TErr errp)
{ ... }
@@
type bool, TV, T1;
identifier ARG1;
@@
bool visit_optional
-(TV v, T1 ARG1, const char *name)
+(TV v, const char *name, T1 ARG1)
{ ... }
@@
type TV, TErr, TObj, T1;
identifier OBJ, ARG1;
@@
void visit_get_next_type
-(TV v, TObj OBJ, T1 ARG1, const char *name, TErr errp)
+(TV v, const char *name, TObj OBJ, T1 ARG1, TErr errp)
{ ... }
@@
type TV, TErr, TObj, T1, T2;
identifier OBJ, ARG1, ARG2;
@@
void visit_type_enum
-(TV v, TObj OBJ, T1 ARG1, T2 ARG2, const char *name, TErr errp)
+(TV v, const char *name, TObj OBJ, T1 ARG1, T2 ARG2, TErr errp)
{ ... }
@@
type TV, TErr, TObj;
identifier OBJ;
identifier VISIT_TYPE =~ "^visit_type_";
@@
void VISIT_TYPE
-(TV v, TObj OBJ, const char *name, TErr errp)
+(TV v, const char *name, TObj OBJ, TErr errp)
{ ... }
// Part 2: swap caller order
@@
expression V, NAME, OBJ, ARG1, ARG2, ERR;
identifier VISIT_TYPE =~ "^visit_type_";
@@
(
-visit_start_struct(V, OBJ, ARG1, NAME, ARG2, ERR)
+visit_start_struct(V, NAME, OBJ, ARG1, ARG2, ERR)
|
-visit_optional(V, ARG1, NAME)
+visit_optional(V, NAME, ARG1)
|
-visit_get_next_type(V, OBJ, ARG1, NAME, ERR)
+visit_get_next_type(V, NAME, OBJ, ARG1, ERR)
|
-visit_type_enum(V, OBJ, ARG1, ARG2, NAME, ERR)
+visit_type_enum(V, NAME, OBJ, ARG1, ARG2, ERR)
|
-VISIT_TYPE(V, OBJ, NAME, ERR)
+VISIT_TYPE(V, NAME, OBJ, ERR)
)
Signed-off-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Message-Id: <1454075341-13658-19-git-send-email-eblake@redhat.com>
Signed-off-by: Markus Armbruster <armbru@redhat.com>
The "flags" bit mask is expanded to two booleans, "data" and "zero";
"bs" is replaced with "filename" string.
Refactor the merge conditions in img_map() into entry_mergeable().
Reviewed-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Signed-off-by: Fam Zheng <famz@redhat.com>
Message-id: 1453780743-16806-16-git-send-email-famz@redhat.com
Signed-off-by: Max Reitz <mreitz@redhat.com>
Now all drivers should return a correct "file", we can make use of it,
even with the recursion into backing chain above.
Reviewed-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Signed-off-by: Fam Zheng <famz@redhat.com>
Message-id: 1453780743-16806-15-git-send-email-famz@redhat.com
Signed-off-by: Max Reitz <mreitz@redhat.com>
The added parameter can be used to return the BDS pointer which the
valid offset is referring to. Its value should be ignored unless
BDRV_BLOCK_OFFSET_VALID in ret is set.
Until block drivers fill in the right value, let's clear it explicitly
right before calling .bdrv_get_block_status.
The "bs->file" condition in bdrv_co_get_block_status is kept now to keep iotest
case 102 passing, and will be fixed once all drivers return the right file
pointer.
Signed-off-by: Fam Zheng <famz@redhat.com>
Message-id: 1453780743-16806-2-git-send-email-famz@redhat.com
Reviewed-by: Max Reitz <mreitz@redhat.com>
Signed-off-by: Max Reitz <mreitz@redhat.com>
Clean up includes so that osdep.h is included first and headers
which it implies are not included manually.
This commit was created with scripts/clean-includes.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Eric Blake <eblake@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Two empty raw files are always compared by actually reading data even if
there is no data, because BDRV_BLOCK_ZERO is considered "allocated" in
bdrv_is_allocated_above(). That is inefficient.
Use bdrv_get_block_status_above() for more information, and skip the
consecutive zero sectors.
This brings a huge speed up in comparing sparse/empty raw images:
$ qemu-img create a 1G
$ time ~/build/master/bin/qemu-img compare a a
Images are identical.
real 0m6.583s
user 0m0.191s
sys 0m6.367s
$ time qemu-img compare a a
Images are identical.
real 0m0.033s
user 0m0.003s
sys 0m0.031s
Signed-off-by: Fam Zheng <famz@redhat.com>
Reviewed-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Done with this Coccinelle semantic patch
@@
expression FMT, E, S;
expression list ARGS;
@@
- error_report(FMT, ARGS, error_get_pretty(E));
+ error_reportf_err(E, FMT/*@@@*/, ARGS);
(
- error_free(E);
|
exit(S);
|
abort();
)
followed by a replace of '%s"/*@@@*/' by '"' and some line rewrapping,
because I can't figure out how to make Coccinelle transform strings.
We now use the error whole instead of just its message obtained with
error_get_pretty(). This avoids suppressing its hint (see commit
50b7b00), but I can't see how the errors touched in this commit could
come with hints.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Message-Id: <1450452927-8346-12-git-send-email-armbru@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Prepend the additional information, colon, space to the original
message without enclosing it in parenthesis or quotes, like we do
elsewhere.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Message-Id: <1450452927-8346-11-git-send-email-armbru@redhat.com>
...But only if we have the backing_filename. It means something Scary
happened and we can't really be quite exactly sure if we can trust the
backing_filename.
Signed-off-by: John Snow <jsnow@redhat.com>
Reviewed-by: Max Reitz <mreitz@redhat.com>
Message-id: 1450122916-4706-5-git-send-email-jsnow@redhat.com
Signed-off-by: Max Reitz <mreitz@redhat.com>
Add an opaque value which is to be passed to the bdrv_amend_options()
status callback.
Signed-off-by: Max Reitz <mreitz@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Reviewed-by: Alberto Garcia <berto@igalia.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Add reference count to block job, meanwhile move the ownership of the
reference to job->bs from the caller (which is released in two
completion callbacks) to the block job itself. It is necessary for
block_job_complete_sync to work, because block job shouldn't live longer
than its bs, as asserted in bdrv_delete.
Now block_job_complete_sync can be simplified.
Signed-off-by: Fam Zheng <famz@redhat.com>
Signed-off-by: John Snow <jsnow@redhat.com>
Message-id: 1446765200-3054-6-git-send-email-jsnow@redhat.com
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
The mirror job doesn't update its total length until
it has already started running, so we should translate
a zero-length job-len as meaning 0%.
Otherwise, we may get divide-by-zero faults.
Signed-off-by: John Snow <jsnow@redhat.com>
Reviewed-by: Jeff Cody <jcody@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
This cleans up the mess we left behind in the mirror code after the
previous patch. Instead of using bdrv_swap(), just change pointers.
The interface change of the mirror job that callers must consider is
that after job completion, their local BDS pointers still point to the
same node now. qemu-img must change its code accordingly (which makes it
easier to understand); the other callers stays unchanged because after
completion they don't do anything with the BDS, but just with the job,
and the job is still owned by the source BDS.
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Reviewed-by: Max Reitz <mreitz@redhat.com>
Reviewed-by: Fam Zheng <famz@redhat.com>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
This is the final step in converting all of the BlockDriverState
pointers that block drivers use to BdrvChild.
After this patch, bs->children contains the full list of child nodes
that are referenced by a given BDS, and these children are only
referenced through BdrvChild, so that updating the pointer in there is
enough for changing edges in the graph.
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Reviewed-by: Alberto Garcia <berto@igalia.com>
Reviewed-by: Max Reitz <mreitz@redhat.com>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Not only it makes sense, but it gets rid of checkpatch warning:
WARNING: consider using qemu_strtosz in preference to strtosz
Also remove get rid of tabs to please checkpatch.
Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Message-Id: <1442419377-9309-1-git-send-email-marcandre.lureau@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Example:
$ ./qemu-img create -f qcow2 /tmp/t.qcow2 64M
$ ./qemu-img amend -f qcow2 -o backing_file=/tmp/t.qcow2, -o help \
/tmp/t.qcow2
This should not crash. This actually is tested by iotest 082, but not
caught due to the segmentation fault being silent (which is something
that needs to be fixed, too).
Reported-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Cc: qemu-stable <qemu-stable@nongnu.org>
Signed-off-by: Max Reitz <mreitz@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
In particular, don't include it into headers.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Luiz Capitulino <lcapitulino@redhat.com>
These macros expand into error class enumeration constant, comma,
string. Unclean. Has been that way since commit 13f59ae.
The error class is always ERROR_CLASS_GENERIC_ERROR since the previous
commit.
Clean up as follows:
* Prepend every use of a QERR_ macro by ERROR_CLASS_GENERIC_ERROR, and
delete it from the QERR_ macro. No change after preprocessing.
* Rewrite error_set(ERROR_CLASS_GENERIC_ERROR, ...) into
error_setg(...). Again, no change after preprocessing.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Luiz Capitulino <lcapitulino@redhat.com>
qerror_report_err() is a transitional interface to help with
converting existing monitor commands to QMP. It should not be used
elsewhere.
The only remaining user in qemu-option.c is qemu_opts_parse(). Is it
used in QMP context? If not, we can simply replace
qerror_report_err() by error_report_err().
The uses in qemu-img.c, qemu-io.c, qemu-nbd.c and under tests/ are
clearly not in QMP context.
The uses in vl.c aren't either, because the only QMP command handlers
there are qmp_query_status() and qmp_query_machines(), and they don't
call it.
Remaining uses:
* drive_def(): Command line -drive and such, HMP drive_add and pci_add
* hmp_chardev_add(): HMP chardev-add
* monitor_parse_command(): HMP core
* tmp_config_parse(): Command line -tpmdev
* net_host_device_add(): HMP host_net_add
* net_client_parse(): Command line -net and -netdev
* qemu_global_option(): Command line -global
* vnc_parse_func(): Command line -display, -vnc, default display, HMP
change, QMP change. Bummer.
* qemu_pci_hot_add_nic(): HMP pci_add
* usb_net_init(): Command line -usbdevice, HMP usb_add
Propagate errors through qemu_opts_parse(). Create a convenience
function qemu_opts_parse_noisily() that passes errors to
error_report_err(). Switch all non-QMP users outside tests to it.
That leaves vnc_parse_func(). Propagate errors through it. Since I'm
touching it anyway, rename it to vnc_parse().
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Reviewed-by: Luiz Capitulino <lcapitulino@redhat.com>
The qemu-img.c file has a read_password() method impl that is
used to prompt for passwords on the console, with impls for
POSIX and Windows. This will be needed by qemu-io.c too, so
move it into the QEMU osdep/oslib files where it can be shared
without code duplication
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
The implementation of qemu-img convert is (a) messy, (b) buggy, and
(c) less efficient than possible. The changes required to beat some
sense into it are massive enough that incremental changes would only
make my and the reviewers' life harder. So throw it away and reimplement
it from scratch.
Let me give some examples what I mean by messy, buggy and inefficient:
(a) The copying logic of qemu-img convert has two separate branches for
compressed and normal target images, which roughly do the same -
except for a little code that handles actual differences between
compressed and uncompressed images, and much more code that
implements just a different set of optimisations and bugs. This is
unnecessary code duplication, and makes the code for compressed
output (unsurprisingly) suffer from bitrot.
The code for uncompressed ouput is run twice to count the the total
length for the progress bar. In the first run it just takes a
shortcut and runs only half the loop, and when it's done, it toggles
a boolean, jumps out of the loop with a backwards goto and starts
over. Works, but pretty is something different.
(b) Converting while keeping a backing file (-B option) is broken in
several ways. This includes not writing to the image file if the
input has zero clusters or data filled with zeros (ignoring that the
backing file will be visible instead).
It also doesn't correctly limit every iteration of the copy loop to
sectors of the same status so that too many sectors may be copied to
in the target image. For -B this gives an unexpected result, for
other images it just does more work than necessary.
Conversion with a compressed target completely ignores any target
backing file.
(c) qemu-img convert skips reading and writing an area if it knows from
metadata that copying isn't needed (except for the bug mentioned
above that ignores a status change in some cases). It does, however,
read from the source even if it knows that it will read zeros, and
then search for non-zero bytes in the read buffer, if it's possible
that a write might be needed.
This reimplementation of the copying core reorganises the code to remove
the duplication and have a much more obvious code flow, by essentially
splitting the copy iteration loop into three parts:
1. Find the number of contiguous sectors of the same status at the
current offset (This can also be called in a separate loop before the
copying loop in order to determine the total sectors for the progress
bar.)
2. Read sectors. If the status implies that there is no data there to
read (zero or unallocated cluster), don't do anything.
3. Write sectors depending on the status. If it's data, write it. If
we want the backing file to be visible (with -B), don't write it. If
it's zeroed, skip it if you can, otherwise use bdrv_write_zeroes() to
optimise the write at least where possible.
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Reviewed-by: Max Reitz <mreitz@redhat.com>
qerror_report_err() is a transitional interface to help with
converting existing monitor commands to QMP. It should not be used
elsewhere. Replace by error_report_err().
Commit 6936f29 cleaned that up in qemu-img.c, but two calls have crept
in since. Take care of them the same way.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
man gcc:
Warn about logical not used on the left hand side operand of a
comparison. This option does not warn if the RHS operand is of a
boolean type.
By preferring bool over int where sensible, but without modifying any
depending code, make GCC happy in cases like this,
qemu-img.c: In function ‘compare_sectors’:
qemu-img.c:992:39: error: logical not is only applied to the left hand
side of comparison [-Werror=logical-not-parentheses]
if (!!memcmp(buf1, buf2, 512) != res) {
hw/ide/core.c:1836 doesn't throw an error,
assert(!!s->error == !!(s->status & ERR_STAT));
even thought the second operand is int (and first hunk of this patch has
a very similar case), maybe GCC developers still have a little faith in
C programmers.
Signed-off-by: Radim Krčmář <rkrcmar@redhat.com>
Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
img_convert() and img_amend() use qemu_opts_do_parse(), which reports
errors with qerror_report_err(). Its error messages aren't helpful
here, the caller reports one that actually makes sense. Reproducer:
$ qemu-img convert -o backing_format=raw in.img out.img
qemu-img: Invalid parameter 'backing_format'
qemu-img: Invalid options for file format 'raw'
To fix, propagate errors through qemu_opts_do_parse(). This lifts the
error reporting into callers. Drop it from img_convert() and
img_amend(), keep it in qemu_chr_parse_compat(), bdrv_img_create().
Since I'm touching qemu_opts_do_parse() anyway, write a function
comment for it.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
qemu_opt_set() is a wrapper around qemu_opt_set() that reports the
error with qerror_report_err().
Most of its users assume the function can't fail. Make them use
qemu_opt_set_err() with &error_abort, so that should the assumption
ever break, it'll break noisily.
Just two users remain, in util/qemu-config.c. Switch them to
qemu_opt_set_err() as well, then rename qemu_opt_set_err() to
qemu_opt_set().
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
add_old_style_options() for img_convert() and img_resize() use
qemu_opt_set(), which reports errors with qerror_report_err(). Its
error messages aren't helpful here, the caller reports one that
actually makes sense. Reproducer:
$ qemu-img convert -B raw in.img out.img
qemu-img: Invalid parameter 'backing_file'
qemu-img: Backing file not supported for file format 'raw'
Switch to qemu_opt_set_err() to get rid of the unwanted messages.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Return the Error object instead of reporting it with
qerror_report_err().
Change callers that assume the function can't fail to pass
&error_abort, so that should the assumption ever break, it'll break
noisily.
Turns out all callers outside its unit test assume that. We could
drop the Error ** argument, but that would make the interface less
regular, so don't.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
qerror_report_err() is a transitional interface to help with
converting existing monitor commands to QMP. It should not be used
elsewhere. Replace by error_report_err().
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Although qemu-img already creates BlockBackends, it does not do accesses
to the images through them. This patch converts all of the bdrv_* calls
for which this is currently possible to blk_* calls. Most of the
remaining calls will probably stay bdrv_* calls because they really do
operate on the BDS level instead of the BB level.
Signed-off-by: Max Reitz <mreitz@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Message-id: 1423162705-32065-10-git-send-email-mreitz@redhat.com
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Signed-off-by: Max Reitz <mreitz@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Message-id: 1423162705-32065-9-git-send-email-mreitz@redhat.com
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Signed-off-by: Max Reitz <mreitz@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Message-id: 1423162705-32065-8-git-send-email-mreitz@redhat.com
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
The argument given to bdrv_find_protocol() is just a file name, which
makes it difficult for the caller to reconstruct what protocol
bdrv_find_protocol() was hoping to find. This patch adds an Error
parameter to that function to solve this issue.
Suggested-by: Eric Blake <eblake@redhat.com>
Signed-off-by: Max Reitz <mreitz@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Message-id: 1423162705-32065-4-git-send-email-mreitz@redhat.com
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
If -n is specified, it does not matter whether the output format and
protocol support image creation; building the creation options should
simply be skipped.
Signed-off-by: Max Reitz <mreitz@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Message-id: 1423666727-20777-2-git-send-email-mreitz@redhat.com
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
This is the same way vl.c handles this.
Signed-off-by: Don Slutz <dslutz@verizon.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
The string field entries 'filename', 'backing_file', and
'exact_filename' in the BlockDriverState struct are defined as 1024
bytes.
However, many places that use these values accept a maximum of PATH_MAX
bytes, so we have a mixture of 1024 byte and PATH_MAX byte allocations.
This patch makes the BlockDriverStruct field string sizes match usage.
This patch also does a few fixes related to the size that needs to
happen now:
* the block qapi driver is updated to use PATH_MAX bytes
* the qcow and qcow2 drivers have an additional safety check
* the block vvfat driver is updated to use PATH_MAX bytes
for the size of backing_file, for systems where PATH_MAX is < 1024
bytes.
* qemu-img uses PATH_MAX rather than 1024. These instances were not
changed to be dynamically allocated, however, as the extra
temporary 3K in stack usage for qemu-img does not seem worrisome.
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Reviewed-by: John Snow <jsnow@redhat.com>
Signed-off-by: Jeff Cody <jcody@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
The image options which can be amended are described by the .create_opts
field for every driver. This field must therefore be non-NULL so that
anything can be amended in the first place. Check that this holds true
before going into qemu_opts_create() (because if .create_opts is NULL,
the create_opts pointer in img_amend() will be NULL after
qemu_opts_append()).
Cc: qemu-stable@nongnu.org
Signed-off-by: Max Reitz <mreitz@redhat.com>
Reviewed-by: Kevin Wolf <kwolf@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
If a driver supports image creation, it needs to set the .create_opts
field. We can use that to make sure .create_opts for both drivers
involved is not NULL for the target image in qemu-img convert, which is
important so that the create_opts pointer in img_convert() is not NULL
after the qemu_opts_append() calls and when going into
qemu_opts_create().
Cc: qemu-stable@nongnu.org
Signed-off-by: Max Reitz <mreitz@redhat.com>
Reviewed-by: Kevin Wolf <kwolf@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
img_open() already prints an error if the operation failed, so there
should not be another error_report() afterwards.
Signed-off-by: Max Reitz <mreitz@redhat.com>
Reviewed-by: Markus Armbruster <armbru@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
As soon as options is set in img_amend(), it needs to be freed before
the function returns. This leak is rather insignificant, as qemu-img
will exit subsequently anyway, but there's no point in not fixing it.
Signed-off-by: Max Reitz <mreitz@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Benoit Canet <benoit@irqsave.net>
Reviewed-by: Kevin Wolf <kwolf@redhat.com>
Reviewed-by: Benoît Canet <benoit.canet@nodalink.com>
Message-id: 1414404776-4919-4-git-send-email-mreitz@redhat.com
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Now that bdrv_amend_options() supports a status callback, use it to
display a progress report.
Signed-off-by: Max Reitz <mreitz@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Benoît Canet <benoit.canet@nodalink.com>
Reviewed-by: Kevin Wolf <kwolf@redhat.com>
Message-id: 1414404776-4919-3-git-send-email-mreitz@redhat.com
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Depending on the changed options and the image format,
bdrv_amend_options() may take a significant amount of time. In these
cases, a way to be informed about the operation's status is desirable.
Since the operation is rather complex and may fundamentally change the
image, implementing it as AIO or a coroutine does not seem feasible. On
the other hand, implementing it as a block job would be significantly
more difficult than a simple callback and would not add benefits other
than progress report to the amending operation, because it should not
actually be run as a block job at all.
A callback may not be very pretty, but it's very easy to implement and
perfectly fits its purpose here.
Signed-off-by: Max Reitz <mreitz@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Benoît Canet <benoit.canet@nodalink.com>
Reviewed-by: Kevin Wolf <kwolf@redhat.com>
Message-id: 1414404776-4919-2-git-send-email-mreitz@redhat.com
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Introduce a new parameter for qemu-img commit which may be used to
explicitly specify the backing file into which an image should be
committed if the backing chain has more than a single layer.
[Applied Eric Blake's qemu-img.texi documentation rewording
--Stefan]
Signed-off-by: Max Reitz <mreitz@redhat.com>
Reviewed-by: Kevin Wolf <kwolf@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Message-id: 1414159063-25977-12-git-send-email-mreitz@redhat.com
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Implement progress output for the commit command by querying the
progress of the block job.
Signed-off-by: Max Reitz <mreitz@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Kevin Wolf <kwolf@redhat.com>
Message-id: 1414159063-25977-11-git-send-email-mreitz@redhat.com
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
After the top image has been committed, it should be emptied unless
specified otherwise.
Signed-off-by: Max Reitz <mreitz@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Kevin Wolf <kwolf@redhat.com>
Message-id: 1414159063-25977-10-git-send-email-mreitz@redhat.com
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
qemu-img should use QMP commands whenever possible in order to ensure
feature completeness of both online and offline image operations. As
qemu-img itself has no access to QMP (since this would basically require
just everything being linked into qemu-img), imitate QMP's
implementation of block-commit by using commit_active_start() and then
waiting for the block job to finish.
Signed-off-by: Max Reitz <mreitz@redhat.com>
Reviewed-by: Kevin Wolf <kwolf@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Message-id: 1414159063-25977-9-git-send-email-mreitz@redhat.com
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Currently, if bdrv_check() fails either by returning -errno or having
check_errors set, qemu-img check just exits with 1 after having told the
user that there were no errors on the image. This is bad.
Instead of printing the check result if there were internal errors which
were so bad that bdrv_check() could not even complete with 0 as a return
value, qemu-img check should inform the user about the error.
Signed-off-by: Max Reitz <mreitz@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Markus Armbruster <armbru@redhat.com>
On BlockBackend destruction, unref its BlockDriverState. Replaces the
callers' unrefs.
This turns the pointer from BlockBackend to BlockDriverState into a
strong reference, managed with bdrv_ref() / bdrv_unref(). The
back-pointer remains weak.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Max Reitz <mreitz@redhat.com>
Reviewed-by: Kevin Wolf <kwolf@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Convenience function blk_new_with_bs() creates a BlockBackend with its
BlockDriverState. Callers have to unref both. The commit after next
will relieve them of the need to unref the BlockDriverState.
Complication: due to the silly way drive_del works, we need a way to
hide a BlockBackend, just like bdrv_make_anon(). To emphasize its
"special" status, give the function a suitably off-putting name:
blk_hide_on_behalf_of_do_drive_del(). Unfortunately, hiding turns the
BlockBackend's name into the empty string. Can't avoid that without
breaking the blk->bs->device_name equals blk->name invariant.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Max Reitz <mreitz@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
A block device consists of a frontend device model and a backend.
A block backend has a tree of block drivers doing the actual work.
The tree is managed by the block layer.
We currently use a single abstraction BlockDriverState both for tree
nodes and the backend as a whole. Drawbacks:
* Its API includes both stuff that makes sense only at the block
backend level (root of the tree) and stuff that's only for use
within the block layer. This makes the API bigger and more complex
than necessary. Moreover, it's not obvious which interfaces are
meant for device models, and which really aren't.
* Since device models keep a reference to their backend, the backend
object can't just be destroyed. But for media change, we need to
replace the tree. Our solution is to make the BlockDriverState
generic, with actual driver state in a separate object, pointed to
by member opaque. That lets us replace the tree by deinitializing
and reinitializing its root. This special need of the root makes
the data structure awkward everywhere in the tree.
The general plan is to separate the APIs into "block backend", for use
by device models, monitor and whatever other code dealing with block
backends, and "block driver", for use by the block layer and whatever
other code (if any) dealing with trees and tree nodes.
Code dealing with block backends, device models in particular, should
become completely oblivious of BlockDriverState. This should let us
clean up both APIs, and the tree data structures.
This commit is a first step. It creates a minimal "block backend"
API: type BlockBackend and functions to create, destroy and find them.
BlockBackend objects are created and destroyed exactly when root
BlockDriverState objects are created and destroyed. "Root" in the
sense of "in bdrv_states". They're not yet used for anything; that'll
come shortly.
A root BlockDriverState is created with bdrv_new_root(), so where to
create a BlockBackend is obvious. Where these roots get destroyed
isn't always as obvious.
It is obvious in qemu-img.c, qemu-io.c and qemu-nbd.c, and in error
paths of blockdev_init(), blk_connect(). That leaves destruction of
objects successfully created by blockdev_init() and blk_connect().
blockdev_init() is used only by drive_new() and qmp_blockdev_add().
Objects created by the latter are currently indestructible (see commit
48f364d "blockdev: Refuse to drive_del something added with
blockdev-add" and commit 2d246f0 "blockdev: Introduce
DriveInfo.enable_auto_del"). Objects created by the former get
destroyed by drive_del().
Objects created by blk_connect() get destroyed by blk_disconnect().
BlockBackend is reference-counted. Its reference count never exceeds
one so far, but that's going to change.
In drive_del(), the BB's reference count is surely one now. The BDS's
reference count is greater than one when something else is holding a
reference, such as a block job. In this case, the BB is destroyed
right away, but the BDS lives on until all extra references get
dropped.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Max Reitz <mreitz@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Creating an anonymous BDS can't fail. Make that obvious.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Max Reitz <mreitz@redhat.com>
Reviewed-by: Benoît Canet <benoit.canet@nodalink.com>
Reviewed-by: Kevin Wolf <kwolf@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Message-id: 1411999675-14533-1-git-send-email-armbru@redhat.com
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
The device_name of a BlockDriverState is currently checked because it is
always used as a QemuOpts ID and qemu_opts_create() checks whether such
IDs are wellformed.
node-name is supposed to share the same namespace, but it isn't checked
currently. This patch adds explicit checks both for device_name and
node-name so that the same rules will still apply even if QemuOpts won't
be used any more at some point.
qemu-img used to use names with spaces in them, which isn't allowed any
more. Replace them with underscores.
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
On a system with a low limit of open files the initialization
of the event notifier could fail and QEMU exits without printing any
error information to the user.
The problem can be easily reproduced by enforcing a low limit of open
files and start QEMU with enough I/O threads to hit this limit.
The same problem raises, without the creation of I/O threads, while
QEMU initializes the main event loop by enforcing an even lower limit of
open files.
This commit adds an error message on failure:
# qemu [...] -object iothread,id=iothread0 -object iothread,id=iothread1
qemu: Failed to initialize event notifier: Too many open files in system
Signed-off-by: Chrysostomos Nanakos <cnanakos@grnet.gr>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
The source cache option takes the same values as the cache option. The
documentation reads a little strange because it starts with "In contrast
the src_cache option ...". The fact that this is comparing with the
previous documented option (the 'cache' option) is implicit. Readers
may be confused, especially if they jump to src_cache without reading
cache documentation first.
Suggested-by: Jeff Nelson <jenelson@redhat.com>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Reviewed-by: Max Reitz <mreitz@redhat.com>
The out label has the qemu_progress_end() and other cleanup calls.
Always goto out in error paths so the cleanup happens. These error
paths now return 1 instead of -1.
Note that bdrv_unref(NULL) is safe. We just need to initialize bs to
NULL at the top of the function.
We can now remove the obsolete bs_old_backing = NULL and bs_new_backing
= NULL for safe mode. Originally it was necessary in commit 3e85c6fd
("qemu-img rebase") but became useless in commit c2abcce ("qemu-img:
avoid calling exit(1) to release resources properly") because the
variables are already initialized during declaration.
Reported-by: John Snow <jsnow@redhat.com>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Reviewed-by: Max Reitz <mreitz@redhat.com>
If img_compare() fails to parse the cache flags the goto out3 code path
will call qemu_progress_end(). Make sure we actually call
qemu_progress_init() first.
Reported-by: Markus Armbruster <armbru@redhat.com>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Reviewed-by: Max Reitz <mreitz@redhat.com>
The img_commit() return value is a process exit code. Use 1 for failure
instead of -1. The other failure paths in this function already use 1.
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Reviewed-by: Max Reitz <mreitz@redhat.com>
This reverts commit 1a443c1b8b and the
later commit 395071a763.
GSequence was introduced in glib 2.14. RHEL 5 fails to compile since it
uses glib 2.12.3.
Now that bdrv_iterate_format() invokes the iteration callback in sorted
order these commits are unnecessary.
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Reviewed-by: Benoît Canet <benoit.canet@nodalink.com>
qemu-img amend may extensively modify the target image, depending on the
options to be amended (e.g. conversion to qcow2 compat level 0.10 from
1.1 for an image with many unallocated zero clusters). Therefore it
makes sense to allow the user to specify the cache mode to be used.
Signed-off-by: Max Reitz <mreitz@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Many qemu-img subcommands only read the source file(s) once. For these
use cases, a full write-back cache is unnecessary and mainly clutters
host cache memory. Though this is generally no concern as cache memory
is freely available and can be scaled by the host OS, it may become a
concern with thin provisioning.
For these cases, it makes sense to allow users to freely specify the
source cache mode (e.g. use no cache at all).
This commit adds a new switch (-T) for the qemu-img subcommands check,
compare, convert and rebase to specify the cache to be used for source
images (the backing file in case of rebase).
Signed-off-by: Max Reitz <mreitz@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v2.0.22 (GNU/Linux)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=5w3j
-----END PGP SIGNATURE-----
Merge remote-tracking branch 'remotes/kevin/tags/for-upstream' into staging
Block patches
# gpg: Signature made Fri 15 Aug 2014 14:07:42 BST using RSA key ID C88F2FD6
# gpg: Good signature from "Kevin Wolf <kwolf@redhat.com>"
* remotes/kevin/tags/for-upstream: (59 commits)
block: Catch !bs->drv in bdrv_check()
iotests: Add test for image header overlap
qcow2: Catch !*host_offset for data allocation
qcow2: Return useful error code in refcount_init()
mirror: Handle failure for potentially large allocations
vpc: Handle failure for potentially large allocations
vmdk: Handle failure for potentially large allocations
vhdx: Handle failure for potentially large allocations
vdi: Handle failure for potentially large allocations
rbd: Handle failure for potentially large allocations
raw-win32: Handle failure for potentially large allocations
raw-posix: Handle failure for potentially large allocations
qed: Handle failure for potentially large allocations
qcow2: Handle failure for potentially large allocations
qcow1: Handle failure for potentially large allocations
parallels: Handle failure for potentially large allocations
nfs: Handle failure for potentially large allocations
iscsi: Handle failure for potentially large allocations
dmg: Handle failure for potentially large allocations
curl: Handle failure for potentially large allocations
...
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
bdrv_get_geometry() hides errors. Use bdrv_nb_sectors() or
bdrv_getlength() instead where that's obviously inappropriate.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Max Reitz <mreitz@redhat.com>
Reviewed-by: Benoit Canet <benoit@irqsave.net>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Chiefly so I don't have to do the error checking in quadruplicate in
the next commit. Moreover, replacing the frequently updated
bs_sectors by an array assigned just once makes the code easier to
understand.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Max Reitz <mreitz@redhat.com>
Reviewed-by: Benoit Canet <benoit@irqsave.net>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Instead of bdrv_getlength(). Replace variable output_length by
output_sectors.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Benoit Canet <benoit@irqsave.net>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
getchar() is a standard c library function which may return with failure
(e.g. -1), so like another platforms, also need check it under WIN32.
And make the related code match current qemu code styles, too.
Signed-off-by: Chen Gang <gang.chen.5i5j@gmail.com>
Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
In this case, 'ret' is already '-1', so need not do it again.
Signed-off-by: Chen Gang <gang.chen.5i5j@gmail.com>
Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
Now that all backend drivers are using QemuOpts, remove all
QEMUOptionParameter related codes.
Signed-off-by: Dong Xu Wang <wdongxu@linux.vnet.ibm.com>
Signed-off-by: Chunyan Liu <cyliu@suse.com>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Change block layer to support both QemuOpts and QEMUOptionParameter.
After this patch, it will change backend drivers one by one. At the end,
QEMUOptionParameter will be removed and only QemuOpts is kept.
Signed-off-by: Dong Xu Wang <wdongxu@linux.vnet.ibm.com>
Signed-off-by: Chunyan Liu <cyliu@suse.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
The exit code 63 (check not supported by image format) was not even
documented in the comment above the check command in the source code;
add it, as it does indeed seem useful.
Also, document all of check's exit codes in the manpage.
Signed-off-by: Max Reitz <mreitz@redhat.com>
Reported-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Benoit Canet <benoit@irqsave.net>
Reviewed-by: Kevin Wolf <kwolf@redhat.com>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
img_check() should report that the format of the given image does not
support checks even if JSON output is desired. JSON data is output to
stdout, as opposed to error messages, which are (in the case of
qemu-img) printed to stderr. Therefore, it is easy to distinguish
between the two.
Also, img_info() does already use error_report() for human-readable
messages even though JSON output is desired (through
collect_image_info_list()).
Signed-off-by: Max Reitz <mreitz@redhat.com>
Reviewed-by: Markus Armbruster <armbru@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Introduced in commit 661a0f7. Spotted by Coverity.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Benoit Canet <benoit@irqsave.net>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Introduced in commit a283cb6; mostly harmless. Spotted by Coverity.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Benoit Canet <benoit@irqsave.net>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
g_sequence_lookup is not supported by glib < 2.28. The usage
of g_sequence_lookup is not essential in this context (it's a
safeguard against duplicate values in the help message).
Removing the call enables the build on all platforms and
does not change the operation of the help function.
Signed-off-by: Mike Day <ncmike@ncultra.org>
Reviewed-by: Eric Blake <eblake@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
If target block driver forces compression, qemu-img convert needs to
write by cluster size as well as "-c" option.
Particularly, this applies for converting to VMDK streamOptimized
format.
Signed-off-by: Fam Zheng <famz@redhat.com>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
The help message for qemu-img lists the supported block formats, of
which there are 27 as of version 2.0.50. The formats are printed in
the order of their driver's position in a linked list, which appears
random. This patch prints the formats in sorted order, making it
easier to read and to find a specific format in the list.
[Added suggestions from Fam Zheng <famz@redhat.com> to declare variables
at the top of the scope in help() and to omit explicit cast for void*
opaque.
--Stefan]
Signed-off-by: Mike Day <ncmike@ncultra.org>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
This allows qemu-img to print out version information, without
needing to print the long help wall of text.
While there, perform some minor whitespace cleanup, and remove the
unused option_index variable in the call to getopt_long().
Reported-by: Eric Blake <eblake@redhat.com>
Signed-off-by: Jeff Cody <jcody@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
This fixes a bug introduced in commit ac1307ab, that caused the
'--help' option to not be recognized as a valid command, and not
print any help.
Signed-off-by: Jeff Cody <jcody@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Previously, when there is a user error in argv parsing, qemu-img prints
help text and exits.
Add an error_exit function to print a helpful error message and a hint
to run 'qemu-img --help' for more information.
As a bonus, "qemu-img <cmd> --help" now has a more reasonable exit code
0.
In the future the help text should be split by sub command, and only
print the information for the specified command.
Signed-off-by: Fam Zheng <famz@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
qemu-img used to use "image" as ID for all block devices. This means
that e.g. img_convert() ended up with potentially multiple source images
and one target image, all with the same ID. The next patch will catch
this and fail to open the block device.
This patch makes sure that qemu-img uses meaningful unique IDs for the
block devices it uses.
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
This patch adds an errp parameter to bdrv_new() and updates all its
callers. The next patches will make use of this in order to check for
duplicate IDs. Most of the callers know that their ID is fine, so they
can simply assert that there is no error.
Behaviour doesn't change with this patch yet as bdrv_new() doesn't
actually assign errors to errp.
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
qemu-img check --repair option accepts an argument. The argument to
--repair switch can either be 'all' or 'leak'. Fix the long option to
mandate argument with --repair switch.
The patch fixes following segmentation fault
Core was generated by `qemu-img check -f qcow2 --repair all t.qcow2'.
Program terminated with signal 11, Segmentation fault.
0 in img_check (argc=6, argv=0x7fffab9b8a10) at qemu-img.c:588
588 if (!strcmp(optarg, "leaks")) {
(gdb) bt
0 img_check (argc=6, argv=0x7fffab9b8a10) at qemu-img.c:588
1 __libc_start_main () from /lib/x86_64-linux-gnu/libc.so.6
2 _start ()
(gdb)
Signed-off-by: Prasad Joshi <prasadjoshi.linux@gmail.com>
Reviewed-by: Leandro Dorileo <l@dorileo.org>
Reviewed-by: Kevin Wolf <kwolf@redhat.com>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Initialise progress output only when the -p and -q options have already
been parsed, otherwise it's always disabled.
Reported-by: Peter Lieven <pl@kamp.de>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
There is no dependency on windows.h, and the standard include files are
already included by qemu-common.h.
Signed-off-by: Stefan Weil <sw@weilnetz.de>
Reviewed-by: Paolo Bonzini <pbonzini@redhat.com>
Reviewed-by: Andreas Färber <afaerber@suse.de>
Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1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=ZaDG
-----END PGP SIGNATURE-----
Merge remote-tracking branch 'remotes/kevin/tags/for-upstream' into staging
Block patches
# gpg: Signature made Fri 21 Feb 2014 21:42:24 GMT using RSA key ID C88F2FD6
# gpg: Good signature from "Kevin Wolf <kwolf@redhat.com>"
* remotes/kevin/tags/for-upstream: (54 commits)
iotests: Mixed quorum child device specifications
quorum: Simplify quorum_open()
quorum: Add unit test.
quorum: Add quorum_open() and quorum_close().
quorum: Implement recursive .bdrv_recurse_is_first_non_filter in quorum.
quorum: Add quorum_co_flush().
quorum: Add quorum_invalidate_cache().
quorum: Add quorum_getlength().
quorum: Add quorum mechanism.
quorum: Add quorum_aio_readv.
blkverify: Extract qemu_iovec_clone() and qemu_iovec_compare() from blkverify.
quorum: Add quorum_aio_writev and its dependencies.
quorum: Create BDRVQuorumState and BlkDriver and do init.
quorum: Create quorum.c, add QuorumChildRequest and QuorumAIOCB.
check-qdict: Test termination of qdict_array_split()
check-qdict: Adjust test for qdict_array_split()
qdict: Extract non-QDicts in qdict_array_split()
qemu-config: Sections must consist of keys
qemu-iotests: Check qemu-img command line parsing
qemu-img: Allow -o help with incomplete argument list
...
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
* remotes/bonzini/configure:
build: softmmu targets do not have a "main.o" file
configure: Disable libtool if -fPIE does not work with it (bug #1257099)
block: convert block drivers linked with libs to modules
Makefile: introduce common-obj-m and block-obj-m for DSO
Makefile: install modules with "make install"
module: implement module loading
rules.mak: introduce DSO rules
darwin: do not use -mdynamic-no-pic
block: use per-object cflags and libs
rules.mak: allow per object cflags and libs
rules.mak: fix $(obj) to a real relative path
util: Split out exec_dir from os_find_datadir
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
This patch allows using 'qemu-img $subcmd -o help' for the create,
convert and amend subcommands, without specifying the previously
required filename arguments.
Note that it's still allowed and meaningful to specify a filename: An
invocation like 'qemu-img create -o help sheepdog:foo' will also display
options that are provided by the Sheepdog driver.
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Reviewed-by: Jeff Cody <jcody@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Instead of ignoring all option values but the last one, multiple -o
options now have the same meaning as having a single option with all
settings in the order of their respective -o options.
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Reviewed-by: Jeff Cody <jcody@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Instead of ignoring all option values but the last one, multiple -o
options now have the same meaning as having a single option with all
settings in the order of their respective -o options.
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Reviewed-by: Jeff Cody <jcody@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
If you specified multiple -o options for qemu-img create, it would
silently ignore all but the last one. This patch fixes the problem.
Now multiple -o options has the same meaning as having a single option
with all settings in the order of their respective -o options.
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Reviewed-by: Jeff Cody <jcody@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Allow bdrv_open() to handle references to existing block devices just as
bdrv_file_open() is already capable of.
Signed-off-by: Max Reitz <mreitz@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Make bdrv_open() take a pointer to a BDS pointer, similarly to
bdrv_file_open(). If a pointer to a NULL pointer is given, bdrv_open()
will create a new BDS with an empty name; if the BDS pointer is not
NULL, that existing BDS will be reused (in the same way as bdrv_open()
already did).
Signed-off-by: Max Reitz <mreitz@redhat.com>
Reviewed-by: Kevin Wolf <kwolf@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
With this change, main() calls qemu_init_exec_dir and uses argv[0] to
init exec_dir. The saved value can be retrieved with
qemu_get_exec_dir later. It will be reused by module loading.
Signed-off-by: Fam Zheng <famz@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
error_is_set(&var) is the same as var != NULL, but it takes
whole-program analysis to figure that out. Unnecessarily hard for
optimizers, static checkers, and human readers. Dumb it down to
obvious.
Gets rid of several dozen Coverity false positives.
Note that the obvious form is already used in many places.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Andreas Färber <afaerber@suse.de>
Signed-off-by: Luiz Capitulino <lcapitulino@redhat.com>
This is a boiler-plate _nofail variant of qemu_opts_create. Remove and
use error_abort in call sites.
null/0 arguments needs to be added for the id and fail_if_exists fields
in affected callsites due to argument inconsistency between the normal and
no_fail variants.
Signed-off-by: Peter Crosthwaite <peter.crosthwaite@xilinx.com>
Reviewed-by: Markus Armbruster <armbru@redhat.com>
Signed-off-by: Luiz Capitulino <lcapitulino@redhat.com>
the progress output is very bumpy if the input images contains
a significant portion of unallocated sectors. This patch
checks how much sectors are allocated a priori if progress
output is selected.
Signed-off-by: Peter Lieven <pl@kamp.de>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
when doing very large jobs updating the progress only every 2%
is too rare.
Signed-off-by: Peter Lieven <pl@kamp.de>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
this patch shortens requests to end at an aligned sector so that
the next request starts aligned.
[Squashed Peter's fix for bdrv_get_info() failure discussed on the
mailing list.
--Stefan]
Reviewed-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Peter Lieven <pl@kamp.de>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
since the convert process is basically a sync operation it might
be benificial in some case to change the hardcoded I/O buffer
size to a greater value.
This patch increases the I/O buffer size if the output
driver advertises an optimal transfer length or discard alignment
that is greater than the default buffer size of 2M.
Reviewed-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Peter Lieven <pl@kamp.de>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Peter Lieven <pl@kamp.de>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
we currently do not check if a sector is allocated during convert.
This means if a sector is unallocated that we allocate a bounce
buffer of zeroes, find out its zero later and do not write it
in the best case. In the worst case this can lead to reading
blocks from a raw device (like iSCSI) altough we could easily
know via get_block_status that they are zero and simply skip them.
This patch also fixes the progress output not being at 100% after
a successful conversion.
Signed-off-by: Peter Lieven <pl@kamp.de>
Reviewed-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Now qemu-img convert have similar options as qemu-nbd for internal
snapshot.
Signed-off-by: Wenchao Xia <xiawenc@linux.vnet.ibm.com>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Since later this function will be used so improve it. The only caller of it
now is qemu-img, and it is not impacted by introduce function
bdrv_snapshot_load_tmp_by_id_or_name() that call bdrv_snapshot_load_tmp()
twice to keep old search logic. bdrv_snapshot_load_tmp_by_id_or_name() return
int to let caller know the errno, and errno will be used later.
Also fix a typo in comments of bdrv_snapshot_delete().
Signed-off-by: Wenchao Xia <xiawenc@linux.vnet.ibm.com>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
If the target has_zero_init = 0, but supports efficiently
writing zeroes by unmapping we call bdrv_make_zero to
avoid fully allocating the target. This currently works
only for iscsi. It can be extended to raw with
BLKDISCARDZEROES for example.
Reviewed-by: Eric Blake <eblake@redhat.com>
Signed-off-by: Peter Lieven <pl@kamp.de>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
This patch moves ret assignment after reporting original error.
We were lucky to pass qemu-iotests 048 (qemu-img compare case) but when
I tried to run with TEST_DIR=/tmp (tmpfs), it fails with a "wrong"
mismatch offset. This fixes two bugs.
In the first if branch, setting ret to 1 before using it makes dead code
in the next line: pnum is never added to mismatch offset even if ret was
0.
In the other if branch, currently the output error is always -4:
strerror(-4) -> Unknown error -4
Added regression test in case 048.
Signed-off-by: Fam Zheng <famz@redhat.com>
Signed-off-by: Amos Kong <akong@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Fam Zheng <famz@redhat.com>
currently it is not possible to distinguish by exitcode if there
has been an error or if bdrv_check is not supported by the image
format. Change the exitcode from 1 to 63 for the latter case.
Signed-off-by: Peter Lieven <pl@kamp.de>
Reviewed-by: Eric Blake <eblake@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Single quotes for JSON are a QMP-ism, use real JSON in
qemu-img output.
Reported-by: Kevin Wolf <kwolf@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
bdrv_img_create generally does not emit the target filename, although
this is pretty important information. Therefore, prepend its error
message with the output filename (if an error occurs).
Signed-off-by: Max Reitz <mreitz@redhat.com>
Add an Error ** parameter to bdrv_create and its associated functions to
allow more specific error messages.
Signed-off-by: Max Reitz <mreitz@redhat.com>
Add an Error ** parameter to bdrv_open, bdrv_file_open and associated
functions to allow more specific error messages.
Signed-off-by: Max Reitz <mreitz@redhat.com>
Snapshot creation actually already distinguish id and name since it take
a structured parameter *sn, but delete can't. Later an accurate delete
is needed in qmp_transaction abort and blockdev-snapshot-delete-sync,
so change its prototype. Also *errp is added to tip error, but return
value is kepted to let caller check what kind of error happens. Existing
caller for it are savevm, delvm and qemu-img, they are not impacted by
introducing a new function bdrv_snapshot_delete_by_id_or_name(), which
check the return value and do the operation again.
Before this patch:
For qcow2, it search id first then name to find the one to delete.
For rbd, it search name.
For sheepdog, it does nothing.
After this patch:
For qcow2, logic is the same by call it twice in caller.
For rbd, it always fails in delete with id, but still search for name
in second try, no change to user.
Some code for *errp is based on Pavel's patch.
Signed-off-by: Wenchao Xia <xiawenc@linux.vnet.ibm.com>
Signed-off-by: Pavel Hrdina <phrdina@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
This patch adds the "amend" option to qemu-img which allows changing
image options on existing image files. It also adds the generic bdrv
implementation which is basically just a wrapper for the image format
specific function.
Signed-off-by: Max Reitz <mreitz@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
This command dumps the metadata of an entire chain, in either tabular or JSON
format.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
This helps implementing is_allocated on top of get_block_status.
Reviewed-by: Eric Blake <eblake@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
qemu-img convert can assume "that sectors which are unallocated in the
input image are present in both the output's and input's base images".
However it is only doing this if the output image returns true for
bdrv_has_zero_init(). Testing bdrv_has_zero_init() does not make much
sense if the output image is copy-on-write, because a copy-on-write
image is never initialized to zero (it is initialized to the content
of the backing file).
There is nothing here that makes has_zero_init images special. The
input and output must be equal for the operation to make sense, and
that's it.
Reviewed-by: Eric Blake <eblake@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Some bdrv_is_allocated callers do not expect errors, but the fallback
in qcow2.c might make other callers trip on assertion failures or
infinite loops.
Fix the callers to always look for errors.
Cc: qemu-stable@nongnu.org
Reviewed-by: Eric Blake <eblake@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Manage BlockDriverState lifecycle with refcnt, so bdrv_delete() is no
longer public and should be called by bdrv_unref() if refcnt is
decreased to 0.
This is an identical change because effectively, there's no multiple
reference of BDS now: no caller of bdrv_ref() yet, only bdrv_new() sets
bs->refcnt to 1, so all bdrv_unref() now actually delete the BDS.
Signed-off-by: Fam Zheng <famz@redhat.com>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Add a -n option to skip volume creation on qemu-img convert.
This is useful for targets such as rbd / ceph, where the
target volume may already exist; we cannot always rely on
qemu-img convert to create the image, as dependent on the
output format, there may be parameters which are not possible
to specify through the qemu-img convert command line.
Reviewed-by: Eric Blake <eblake@redhat.com>
Signed-off-by: Alexandre Derumier <aderumier@odiso.com>
Signed-off-by: Alex Bligh <alex@alex.org.uk>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
This prevents the tools from being stopped when they write data to a
closed connection in the other side.
Signed-off-by: MORITA Kazutaka <morita.kazutaka@lab.ntt.co.jp>
Reviewed-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Don't silently ignore excess arguments at the end of the command line,
but error out instead. This can catch typos like 'resize test.img + 1G',
which doesn't increase the image size by 1G as intended, but truncates
the image to 1G. Even for less dangerous commands, the old behaviour is
confusing.
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Reviewed-by: Laszlo Ersek <lersek@redhat.com>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
One of the major reasons for doing something new for -blockdev and
blockdev-add was that the old block layer code parses filenames instead
of just taking them literally. So we should really leave it untouched
when it's passing using the new interfaces (like -drive
file.filename=...).
This allows opening relative file names that contain a colon.
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
This patch adds function bdrv_query_image_info(), which will
retrieve image info in qmp object format. The implementation is
based on the code moved from qemu-img.c, but uses block layer
function to get snapshot info.
Signed-off-by: Wenchao Xia <xiawenc@linux.vnet.ibm.com>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
This patch adds function bdrv_query_snapshot_info_list(), which will
retrieve snapshot info of an image in qmp object format. The implementation
is based on the code moved from qemu-img.c with modification to fit more
for qmp based block layer API.
Signed-off-by: Wenchao Xia <xiawenc@linux.vnet.ibm.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
bdrv_snapshot_dump() and bdrv_image_info_dump() do not dump to a buffer now,
some internal buffers are still used for format control, which have no
chance to be truncated. As a result, these two functions have no more issue
of truncation, and they can be used by both qemu and qemu-img with correct
parameter specified.
Signed-off-by: Wenchao Xia <xiawenc@linux.vnet.ibm.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
This patch is a pure code move patch, except following modification:
1 get_human_readable_size() is changed to static function.
2 dump_human_image_info() is renamed to bdrv_image_info_dump().
3 in qmp_query_block() and qmp_query_blockstats, use bdrv_next(bs)
instead of direct traverse of global array 'bdrv_states'.
4 collect_snapshots() and collect_image_info() are renamed, unused parameter
*fmt in collect_image_info() is removed.
5 code style fix.
To avoid conflict and tip better, macro in header file is BLOCK_QAPI_H
instead of QAPI_H. Now block.h and snapshot.h are at the same level in
include path, block_int.h and qapi.h will both include them.
Signed-off-by: Wenchao Xia <xiawenc@linux.vnet.ibm.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
bdrv_write_compressed() does not allow requests that span the end of the
device. Therefore it is useless to zero-pad the last cluster and
thereby exceed the end of the device.
Let image formats handle zero-padding the final compressed cluster, if
necessary.
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
It doesn't do anything yet except storing the options QDict in the
BlockDriverState.
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
This patch adds new qemu-img subcommand that compares content of two disk
images.
Signed-off-by: Miroslav Rezanina <mrezanin@redhat.com>
Reviewed-by: Kevin Wolf <kwolf@redhat.com>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
There can be a need to turn output to stdout off. This patch adds a -q option
that enable "Quiet mode". In Quiet mode, only errors are printed out.
Signed-off-by: Miroslav Rezanina <mrezanin@redhat.com>
Reviewed-by: Kevin Wolf <kwolf@redhat.com>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Show how many clusters are compressed. This can be used to monitor how
many compressed clusters remain and whether to recompress the image.
Suggested-by: Cole Robinson <crobinso@redhat.com>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
The qemu-img check fragmentation printf() is missing a space before the
'=' sign. The human output is not guaranteed to be stable and we are
not aware of screen scrapers, so add the missing space.
Also fix the missing indentation of the printf() arguments.
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
This option --output=[human|json] makes qemu-img check output a human
or JSON representation at the choice of the user.
Signed-off-by: Federico Simoncelli <fsimonce@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
This patch adds the support for reporting the image end offset (in
bytes). This is particularly useful after a conversion (or a rebase)
where the destination is a block device in order to find the first
unused byte at the end of the image.
Signed-off-by: Federico Simoncelli <fsimonce@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
qemu-img will complain when qcow or qcow2
size overflow for 64 bits, report the right
message in this condition.
$./qemu-img create -f qcow2 /tmp/foo 0x10000000000000000
before change:
qemu-img: Invalid image size specified! You may use k, M, G or T suffixes for
qemu-img: kilobytes, megabytes, gigabytes and terabytes.
after change:
qemu-img: Image size must be less than 8 EiB!
[Resolved conflict with a9300911 goto removal -- Stefan]
Signed-off-by: liguang <lig.fnst@cn.fujitsu.com>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
We will use qemu_opts_create_nofail function, it can make code
more readable.
Signed-off-by: Dong Xu Wang <wdongxu@linux.vnet.ibm.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
This commit adds an Error ** argument to bdrv_img_create() and set it
appropriately on error.
Callers of bdrv_img_create() pass NULL for the new argument and still
rely on bdrv_img_create()'s return value. Next commits will change
callers to use the Error object instead.
Signed-off-by: Luiz Capitulino <lcapitulino@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Tools were broken because they initialized the block layer while
qemu_aio_context was still NULL.
Reported-by: malc <av1474@comtv.ru>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: malc <av1474@comtv.ru>
This patch allows an empty filename to be passed as the new base image name
for qemu-img rebase to mean base the image on no backing file (i.e.
independent of any backing file). According to Eric Blake, qemu-img rebase
already supports this when '-u' is used; this adds support when -u is not
used.
Signed-off-by: Alex Bligh <alex@alex.org.uk>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
* kwolf/for-anthony:
block: Don't forget to delete temporary file
Don't require encryption password for 'qemu-img info' command
qemu-img: Add json output option to the info command.
qapi: Add SnapshotInfo and ImageInfo.
ahci: properly reset PxCMD on HBA reset
block: fix block tray status
vdi: Fix warning from clang
block/curl: Fix wrong free statement
ide: Fix error messages from static code analysis (no real error)
ATAPI: STARTSTOPUNIT only eject/load media if powercondition is 0
sheepdog: fix savevm and loadvm
These wrong spellings were detected by codespell:
* successully -> successfully
* alot -> a lot
* wanna -> want to
* infomation -> information
* occured -> occurred
["also is" -> "is also" and "ressources" -> "resources" suggested by
Peter Maydell <peter.maydell@linaro.org>]
Signed-off-by: Stefan Weil <sw@weilnetz.de>
Signed-off-by: Stefan Hajnoczi <stefanha@linux.vnet.ibm.com>
The encryption password is only required if I/O is going to be
performed on a disk image. The 'qemu-img info' command merely
reports metadata, so it should not ask for a decryption password
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Image formats with a dirty bit, like qed and qcow2, repair dirty image
files upon open with BDRV_O_RDWR. Performing automatic repair when
qemu-img check runs is not ideal because the bdrv_open() call repairs
the image before the actual bdrv_check() call from qemu-img.c.
Fix this "double repair" since it leads to confusing output from
qemu-img check. Tell the block driver that this image is being opened
just for bdrv_check(). This skips automatic repair and qemu-img.c can
invoke it manually with bdrv_check().
Update the golden output for qemu-iotests 039 to reflect the new
qemu-img check output.
Signed-off-by: Stefan Hajnoczi <stefanha@linux.vnet.ibm.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Signed-off-by: Dong Xu Wang <wdongxu@linux.vnet.ibm.com>
Reviewed-by: Stefan Hajnoczi <stefanha@linux.vnet.ibm.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
For command line options which permit '?' meaning 'please list the
permitted values', add support for 'help' as a synonym, by abstracting
the check out into a helper function.
This change means that in some cases where we were being lazy in
our string parsing, "?junk" will now be rejected as an invalid option
rather than being (undocumentedly) treated the same way as "?".
Update the documentation to use 'help' rather than '?', since '?'
is a shell metacharacter and thus prone to fail confusingly if there
is a single character filename in the current working directory and
the '?' has not been escaped. It's therefore better to steer users
towards 'help', though '?' is retained for backwards compatibility.
We do not, however, update the output of the system emulator's -help
(or any documentation autogenerated from the qemu-options.hx which
is the source of the -help text) because libvirt parses our -help
output and will break. At a later date when QEMU provides a better
interface so libvirt can avoid having to do this, we can update the
-help text too.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
So callers don't need to know anything about maximum name length.
Returning a pointer is safe, because the name string lives as long as
the block driver it names, and block drivers don't die.
Requested by Peter Maydell.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
When any inconsistencies have been fixed, print the statistics and run
another check to make sure everything is correct now.
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
The QED block driver already provides the functionality to not only
detect inconsistencies in images, but also fix them. However, this
functionality cannot be manually invoked with qemu-img, but the
check happens only automatically during bdrv_open().
This adds a -r switch to qemu-img check that allows manual invocation
of an image repair.
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
The following command generates a segmentation fault.
qemu-img convert -O vpc -o ? test test2
This is because the 'goto out;' statement calls qemu_progress_end
before qemu_progress_init is called resulting in a NULL pointer
invocation.
Signed-off-by: Charles Arnold <carnold@suse.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
qemu-img info should use the same logic as qemu when printing the
backing file path, or debugging becomes quite tricky. We can also
simplify the output in case the backing file has an absolute path
or a protocol.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
The 'qemu-img convert -h' advertise that the default cache mode is
'writeback', while in fact it is 'unsafe'.
This patch 1) fix the help manual and 2) let bdrv_close() call bdrv_flush()
2) is needed because some backend storage doesn't have a self-flush
mechanism(for e.g., sheepdog), so we need to call bdrv_flush() to make
sure the image is really writen to the storage instead of hanging around
writeback cache forever.
Signed-off-by: Liu Yuan <tailai.ly@taobao.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Some block drivers can verify their image files are clean or not. So we can show
it while using "qemu-img info".
Signed-off-by: Dong Xu Wang <wdongxu@linux.vnet.ibm.com>
Reviewed-by: Stefan Hajnoczi <stefanha@linux.vnet.ibm.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Discussion can be found at:
http://patchwork.ozlabs.org/patch/128730/
This patch add image fragmentation statistics while using qemu-img check.
Signed-off-by: Dong Xu Wang <wdongxu@linux.vnet.ibm.com>
Reviewed-by: Stefan Hajnoczi <stefanha@linux.vnet.ibm.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
qemu-img resize has some limitations with qcow2, but the user is only
told that "this image format does not support resize". Quite confusing,
so add some more detailed error_report() calls and change "this image
format" into "this image".
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Reviewed-by: Stefan Hajnoczi <stefanha@linux.vnet.ibm.com>
[root@f15 qemu]# qemu-img info /home/zwu/work/misc/rh6.img
image: /home/zwu/work/misc/rh6.img
file format: qed
virtual size: 4.0G (4294967296 bytes)
disk size: 1.2G
cluster_size: 65536
Segmentation fault (core dumped)
Today when i were fixing another issue, i found this issue; After simple
investigation, i found that the required clock vm_clock is not created
for qemu tool.
Signed-off-by: Zhi Yong Wu <wuzhy@linux.vnet.ibm.com>
Reviewed-by: Stefan Hajnoczi <stefanha@linux.vnet.ibm.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
The qemu-img.c:is_not_zero() function checks if a buffer contains all
zeroes. This function will come in handy for zero-detection in the
block layer, so clean it up and move it to cutils.c.
Note that the function now returns true if the buffer is all zeroes.
This avoids the double-negatives (i.e. !is_not_zero()) that the old
function can cause in callers.
Signed-off-by: Stefan Hajnoczi <stefanha@linux.vnet.ibm.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Backing files may be smaller than the corresponding COW file. When
reading directly from the backing file, qemu-img rebase must consider
this and assume zero sectors after the end of backing files.
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Reviewed-by: Stefan Hajnoczi <stefanha@linux.vnet.ibm.com>
strtosz_suffix() fails unless the size is followed by 0, whitespace or
','. Useless here, because we need to fail for any junk following the
size, even if it starts with whitespace or ','. Check manually.
Things like "qemu-img create xxx 1024," and "qemu-img convert -S '1024
junk'" are now caught.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
Only qcow and qcow2 can do compression at all, and they require unallocated
clusters when writing the compressed data.
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Reviewed-by: Stefan Hajnoczi <stefanha@linux.vnet.ibm.com>
By default, require 4k of consecutive zero bytes for qemu-img to make the
output file sparse by not issuing a write request for the zeroed parts. Add an
-S option to allow users to tune this setting.
This helps to avoid situations where a lot of zero sectors and data sectors are
mixed and qemu-img tended to issue many tiny 512 byte writes.
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Now that you can use cache=none for the output file in qemu-img, we should
properly align our buffers so that raw-posix doesn't have to use its (smaller)
bounce buffer.
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Reviewed-by: Stefan Hajnoczi <stefanha@linux.vnet.ibm.com>
This patch adds -drive cache=directsync for O_DIRECT | O_SYNC host file
I/O with no disk write cache presented to the guest.
This mode is useful when guests may not be sending flushes when
appropriate and therefore leave data at risk in case of power failure.
When cache=directsync is used, write operations are only completed to
the guest when data is safely on disk.
This new mode is like cache=writethrough but it bypasses the host page
cache.
Signed-off-by: Stefan Hajnoczi <stefanha@linux.vnet.ibm.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>