Add helpers helper_addsur_h/_ssov which adds one halfword and subtracts one
halfword, rounds / and saturates each half word independently.
Add microcode helper functions:
* gen_maddsu_h/sus_h: multiply two halfwords left justified and add to the
first one word and subtract from the second one word
/ and saturate each resulting word independetly.
* gen_maddsum_h/sums_h: multiply two halfwords in q-format left justified
and add to the first one word and subtract from
the second one word / and saturate each resulting
word independetly.
* gen_maddsur32_h/32s_h: multiply two halfwords in q-format left justified
and add to the first one word and subtract from
the second one word, round both results / and
saturate each resulting word independetly.
Signed-off-by: Bastian Koppelmann <kbastian@mail.uni-paderborn.de>
Reviewed-by: Richard Henderson <rth@twiddle.net>
Add helpers:
* madd64_q_ssov: multiply two 32 bit q-format number, add them with a
64 bit q-format number and saturate.
* madd32_q_add_ssov: add two 64 bit q-format numbers and return a 32 bit
result.
* maddr_q_ssov: multiplay two 32 bit q-format numbers, add a 32 bit
q-format number and saturate.
* maddr_q: multiplay two 32 bit q-format numbers and add a 32 bit
q-format number.
Note: madd instructions in the q format can behave strange, e.g.
0x1 + (0x80000000 * 0x80000000) << 1 for 32 bit signed values does not cause an
overflow on the guest, because all intermediate results should be handled as if
they are indefinitely precise. We handle this by inverting the overflow bit for
all cases: a + (0x80000000 * 0x80000000) << 1.
Signed-off-by: Bastian Koppelmann <kbastian@mail.uni-paderborn.de>
Reviewed-by: Richard Henderson <rth@twiddle.net>
Add helpers:
* add64_ssov: adds two 64 bit values and saturates the result.
* addr_h/_ssov: adds two halfwords with two words in q-format with rounding
/ and saturates each result independetly.
Add microcode generator:
* gen_add64_d: adds two 64 bit values.
* gen_addsub64_h: adds/subtracts one halfwords with a word and adds/
subtracts another halftword with another word.
* gen_madd_h/s_h: multiply four halfwords, add each result left justfied
to two word values / and saturate each result.
* gen_maddm_h/s_h: multiply four halfwords, add each result left justfied
to two words values in q-format / and saturate each
result.
* gen_maddr32/64_h/s_h: multiply four halfwords, add each result left
justfied to two halftwords/words values in q-format
/ and saturate each result.
Signed-off-by: Bastian Koppelmann <kbastian@mail.uni-paderborn.de>
Reviewed-by: Richard Henderson <rth@twiddle.net>
If the signed result of the multiplication overflows, we would get a negative
value, which would result in a addition instead of a subtraction.
Now we do the overflow calculation and saturation by hand instead of using
suov32_neg.
Signed-off-by: Bastian Koppelmann <kbastian@mail.uni-paderborn.de>
Reviewed-by: Richard Henderson <rth@twiddle.net>
This reverts commit b8a173b25c, reversing
changes made to 5de090464f.
(I applied this pull request when I should not have done so, and
am now immediately reverting it.)
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
DTrace on Mac OS X fails due to trace events using 'self' as an argument
name:
GEN trace/generated-tracers-dtrace.h
dtrace: failed to compile script trace/generated-tracers-dtrace.dtrace: line 1330: syntax error, unexpected DT_KEY_SELF, expecting ) near "self"
make: *** [trace/generated-tracers-dtrace.h] Error 1
Filter argument names according to the list of DTrace .d file reserved
keywords.
Note that DTrace on Mac and Linux still do not work after this patch.
There are additional build issues remaining.
Reported-by: Henk Poley <henkpoley@gmail.com>
Tested-by: Henk Poley <henkpoley@gmail.com>
Cc: Lluís Vilanova <vilanova@ac.upc.edu>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
It looks like the dtrace trace code gets upset if you have trace names
with __ in, which the migration/rdma.c code does.
Rename the functions and the associated traces.
Fixes: 733252deb8
Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Reported-by: Andreas Färber <afaerber@suse.de>
Reviewed-by: Paolo Bonzini <pbonzini@redhat.com>
Tested-by: Andreas Färber <afaerber@suse.de>
Message-id: 1424105885-12149-1-git-send-email-dgilbert@redhat.com
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Linux v4.0-rc1 vfio-pci introduced a new virtual interrupt to allow
the kernel to request a device from the user. When signaled, QEMU
will by default attmempt to hot-unplug the device. This is a one-
shot attempt with the expectation that the kernel will continue to
poll for the device if it is not returned. Returning the device when
requested is the expected standard model of cooperative usage, but we
also add an option option to disable this feature. Initially this
opt-out is set as an experimental option because we really should
honor kernel requests for the device.
Signed-off-by: Alex Williamson <alex.williamson@redhat.com>
Disabling MMAP support uses the slower read/write accesses but allows to
trace all MMIO accesses, which is not good for performance, but very
useful for reverse engineering PCI drivers. This option allows to
disable MMAP per device without a compile-time change.
Signed-off-by: Samuel Pitoiset <samuel.pitoiset@gmail.com>
Signed-off-by: Alex Williamson <alex.williamson@redhat.com>
They are not used from anywhere but common.c which is where these are
defined so make them static.
Signed-off-by: Alexey Kardashevskiy <aik@ozlabs.ru>
Signed-off-by: Alex Williamson <alex.williamson@redhat.com>
This makes the error report more informative.
Signed-off-by: Alexey Kardashevskiy <aik@ozlabs.ru>
Signed-off-by: Alex Williamson <alex.williamson@redhat.com>
Version: GnuPG v1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=+Vbk
-----END PGP SIGNATURE-----
Merge remote-tracking branch 'remotes/ehabkost/tags/x86-pull-request' into staging
* remotes/ehabkost/tags/x86-pull-request:
target-i386: Move APIC ID compatibility code to pc.c
target-i386: Require APIC ID to be explicitly set before CPU realize
target-i386: Set APIC ID using cpu_index on CONFIG_USER
linux-user: Check for cpu_init() errors
target-i386: Move CPUX86State.cpuid_apic_id to X86CPU.apic_id
target-i386: Simplify error handling on cpu_x86_init_user()
target-i386: Eliminate cpu_init() function
target-i386: Rename cpu_x86_init() to cpu_x86_init_user()
target-i386: Move topology.h to include/hw/i386
target-i386: Eliminate unnecessary get_cpuid_vendor() function
target-i386: Simplify listflags() function
Conflicts:
target-i386/cpu.c
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
For good measure, ensure that the following sequence:
thread 1 calls qemu_mutex_lock_iothread
thread 2 calls qemu_mutex_lock_iothread
VCPU thread are created
VCPU thread enters execution loop
results in the VCPU threads letting the other two threads run
and obeying iothread_requesting_mutex even if the VCPUs are
not halted. To do this, check iothread_requesting_mutex
before execution starts.
Tested-by: Leon Alrae <leon.alrae@imgtec.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
When two threads (other than the low-priority TCG VCPU thread)
are competing for the iothread lock, a deadlock can happen. This
is because iothread_requesting_mutex is set to false by the first
thread that gets the mutex, and then the VCPU thread might never
yield from the execution loop. If iothread_requesting_mutex is
changed from a bool to a counter, the deadlock is fixed.
However, there is another bug in qemu_mutex_lock_iothread that
can be triggered by the new call_rcu thread. The bug happens
if qemu_mutex_lock_iothread is called before the CPUs are
created. In that case, first_cpu is NULL and the caller
segfaults in qemu_mutex_lock_iothread. To fix this, just
do not do the kick if first_cpu is NULL.
Reported-by: Leon Alrae <leon.alrae@imgtec.com>
Reported-by: Andreas Gustafsson <gson@gson.org>
Tested-by: Leon Alrae <leon.alrae@imgtec.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
s->blocker is really only used in hw/scsi/virtio-scsi.c; the only places
where it is used in hw/scsi/virtio-scsi-dataplane.c is when it is
allocated and when it is freed. That does not make a whole lot of sense
(and is actually wrong because this leads to s->blocker potentially
being NULL when blk_op_block_all() is called in virtio-scsi.c), so move
the allocation and destruction of s->blocker to the device realization
and unrealization in virtio-scsi.c, respectively.
Case in point:
$ echo -e 'eject drv\nquit' | \
x86_64-softmmu/qemu-system-x86_64 \
-monitor stdio -machine accel=qtest -display none \
-object iothread,id=thr -device virtio-scsi-pci,iothread=thr \
-drive if=none,file=test.qcow2,format=qcow2,id=drv \
-device scsi-cd,drive=drv
Without this patch:
(qemu) eject drv
[1] 10102 done
10103 segmentation fault (core dumped)
With this patch:
(qemu) eject drv
Device 'drv' is busy: block device is in use by data plane
(qemu) quit
Signed-off-by: Max Reitz <mreitz@redhat.com>
Message-Id: <1425057113-26940-1-git-send-email-mreitz@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
relink binary whenever config-devices.mak changes:
this makes sense as we are adding/removing devices,
so binary has to be relinked to be up to date.
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
more trivial changes as more code has been rewritten in C.
we also got rid of extra Scope operators.
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Replace string "slot" in acpi_memory_plug_cb() with macro PC_DIMM_SLOT_PROP.
Reviewed-by: Igor Mammedov <imammedo@redhat.com>
Signed-off-by: Tang Chen <tangchen@cn.fujitsu.com>
Signed-off-by: Zhu Guihua <zhugh.fnst@cn.fujitsu.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Commit 79ca616 (v1.6.0) accidentally disabled legacy x86-only HMP
commands pci_add, pci_del: it defined CONFIG_PCI_HOTPLUG only as make
variable, not as preprocessor macro, killing the code conditional on
defined(CONFIG_PCI_HOTPLUG_OLD).
In all this time, nobody reported the loss. I only noticed it when I
tried to test some error reporting change that forced me to touch this
old crap again.
Fun: git-log hw/pci/pci-hotplug-old.c shows our faith in the backward
compatibility god has been strong enough to sacrifice at its altar
about a dozen times, but not strong enough to even once verify the
legacy feature's still there, let alone works.
Remove the commands along with the code backing them.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
None of them should be used in new code.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
build_*() routines were used for composing AML
structures manually in acpi-build.c but after
conversion to AML API they are not used outside
of aml-build.c anymore, so hide them from external
users.
Signed-off-by: Igor Mammedov <imammedo@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Replace AML template patching with direct composing
of PCI device entries in C. It allows to simplify
PCI tree generation further and saves us about 400LOC
scattered through different files, confining tree
generation to one C function which is much easier
to deal with.
Signed-off-by: Igor Mammedov <imammedo@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
it basicaly does the same as original approach,
* just without bus/notify tables tracking (less obscure)
which is easier to follow.
* drops unnecessary loops and bitmaps,
creating devices and notification method in the same loop.
* saves us ~100LOC
Signed-off-by: Igor Mammedov <imammedo@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Adds alternative ACPI table blob selection for testing
non default QEMU configurations. If blob file for test
variant is not present, fallback to default blob.
With this change implement testing with a coldplugged
bridge.
Signed-off-by: Igor Mammedov <imammedo@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
PCI0._CRS was moved into SSDT and became the same for
PIIX4/Q35 machines.
Signed-off-by: Igor Mammedov <imammedo@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
patch moves SMC device into SSDT and creates it only
when device is present, which makes ACPI tables smaller
in default case when device is not present.
Also it fixes wrong IO range in CRS if "iobase"
property is set to a non default value.
PS:
Testing with XP shows that current default "iobase"
used SMC device conflicts with floppy controller IO,
but it's topic for another patch and I'd leave it
to SMC device author for resolving conflict.
Signed-off-by: Igor Mammedov <imammedo@redhat.com>
CC: agraf@suse.de
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
IO port and length will be used in following patch
to correctly generate SMC ACPI device in SSDT.
Signed-off-by: Igor Mammedov <imammedo@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
It drops empty ssdt_misc templete. It also hides
from user almost all pointer arithmetic when building
SSDT which makes resulting code a bit cleaner
and concentrating only on composing ASL construct
/i.e. a task build_ssdt() should be doing/.
Also it makes one binary blob less stored in QEMU
source tree by removing need to keep and update
hw/i386/ssdt-misc.hex.generated file here in total
saving us ~430LOC.
Signed-off-by: Igor Mammedov <imammedo@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Drops manual hole punching in PCI0._CRS on PIIX4 machine type
for GPE0 resources. Resources will be consumed by Device(GPE0)
that is attached to PCI namespace.
There is GPE device with HID ACPI0006 since ACPI2.0
that should be used for this purpose but none of Windows
versions support it and show it as "unknown device",
so reserve resource in old fashioned way with PNP0A06
device to make windows happy and actually reserve resources.
Along with last hole _CRS layout of PIIX4 machine becomes
the same as Q35 one, so merge them together and use the same
_CRS for both machine types.
Signed-off-by: Igor Mammedov <imammedo@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Drops manual hole punching in PCI0._CRS on PIIX4 machine type
for CPU hotplug resources.
Resources will be consumed by Device(PRES) that is attached
to PCI bus. The same way how it currently works for mem hotlpug.
Signed-off-by: Igor Mammedov <imammedo@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Drops manual hole punching in PCI0._CRS for PIIX4 machine type.
Resources will be consumed by Device(PHPR) that cwis attached
to PCI bus. The same way how it currently works for mem hotlpug.
Manual hole in PIIX4 _CRS wasn't correct anyway since it was
legacy size 0xF while current PCIHP MMIO region is of size 0x14.
Signed-off-by: Igor Mammedov <imammedo@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Replace template patching and runtime calculation
in _CRS() method with static _CRS defined in SSDT.
No functional change except of as mentined above
and _CRS being moved from DSDT to SSDT.
Signed-off-by: Igor Mammedov <imammedo@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Provide the TIS 1.3 capability flags.
The interface now looks like a TIS 1.3 interface. It's fully
compatible with previous TIS 1.2 and drivers written for
TIS 1.2 continue to work.
Signed-off-by: Stefan Berger <stefanb@linux.vnet.ibm.com>
Acked-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Extend the backend to check whether the TPM_ContinueSelfTest
finished successfully and provide a flag to the TIS front-end
if it successfully finished. The TIS then sets a flag in
all localities in the STS register and keeps it until the next
reset.
Signed-off-by: Stefan Berger <stefanb@linux.vnet.ibm.com>
Acked-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Support for the XFIFO register (range) of the TIS 1.3 specification.
We support a range of 64 bytes.
Signed-off-by: Stefan Berger <stefanb@linux.vnet.ibm.com>
Acked-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Improve the access to the registers with 32 and 16 bit reads and writes.
Also enable access to a non-base register address, such as reads of the
2nd byte of a register. Map the FIFO byte access to any byte within
its 4 byte register (following specs).
Signed-off-by: Stefan Berger <stefanb@linux.vnet.ibm.com>
Acked-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
More recent TIS specs extend the STS register to 32 bit. While
we don't store the TIS interface state, yet, we can extend it
without sideeffects.
Signed-off-by: Stefan Berger <stefanb@linux.vnet.ibm.com>
Acked-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
The idea is that all other virtio devices are calling this helper
to merge properties of the proxy device. This is the only difference
in between this helper and code in inside virtio_instance_init_common.
The patch should not cause any harm as property list in generic balloon
code is empty.
This also allows to avoid some dummy errors like fixed by this
commit 91ba212088
Author: Gonglei <arei.gonglei@huawei.com>
Date: Tue Sep 30 14:10:35 2014 +0800
virtio-balloon: fix virtio-balloon child refcount in transports
Signed-off-by: Denis V. Lunev <den@openvz.org>
Signed-off-by: Raushaniya Maksudova <rmaksudova@parallels.com>
Revieved-by: Cornelia Huck <cornelia.huck@de.ibm.com>
CC: Christian Borntraeger <borntraeger@de.ibm.com>
CC: Anthony Liguori <aliguori@amazon.com>
CC: Michael S. Tsirkin <mst@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
relink binary whenever config-devices.mak changes:
this makes sense as we are adding/removing devices,
so binary has to be relinked to be up to date.
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Message-Id: <1424332114-13440-2-git-send-email-mst@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
V=1 should show what's going on, it's not nice
to silence things unconditionally.
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Message-Id: <1424332114-13440-1-git-send-email-mst@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
This patch enables parallel building of QEMU in MSYS+MinGW environment.
Currently an attempt to build QEMU in parallel fails on generation of
version.lo (and version.o too).
The cause of the failure is that when listing prerequisites "Makefile"
references "config-host.h" by absolute path in some rules and by relative
path in others. Make cannot figure out that these references points to the
same file which leads to the race: the generation of "version.*" which
requires "$(BUILD_DIR)/config-host.h" is launched in parallel with the
generation of "config-host.h" needed by other "Makefile" targets.
This patch removes "$(BUILD_DIR)/" prefix from corresponding prerequisite
of "version.*". There is no other prerequisites "$(BUILD_DIR)/config-host.h"
found.
Also note that not every version of MSYS is able to build QEMU in parallel,
see: "http://sourceforge.net/p/mingw/bugs/1950/". The suggested version is
1.0.17.
Signed-off-by: Vasily Efimov <real@ispras.ru>
Message-Id: <1424264377-5992-1-git-send-email-real@ispras.ru>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
