Normally we create an address space for that CPU and pass that address
space into the function. Let's just do it inside to unify address space
creations. It'll simplify my next patch to rename those address spaces.
Signed-off-by: Peter Xu <peterx@redhat.com>
Message-Id: <20171123092333.16085-3-peterx@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
In commit e3af7c788b we
replaced direct calls to to cpu_ld*_code() with calls
to the x86_ld*_code() wrappers which incorporate an
advance of s->pc. Unfortunately we didn't notice that
in one place the old code was deliberately not incrementing
s->pc:
@@ -4501,7 +4528,7 @@ static target_ulong disas_insn(DisasContext *s, CPUState *cpu)
static const int pp_prefix[4] = {
0, PREFIX_DATA, PREFIX_REPZ, PREFIX_REPNZ
};
- int vex3, vex2 = cpu_ldub_code(env, s->pc);
+ int vex3, vex2 = x86_ldub_code(env, s);
if (!CODE64(s) && (vex2 & 0xc0) != 0xc0) {
/* 4.1.4.6: In 32-bit mode, bits [7:6] must be 11b,
This meant we were mishandling this set of instructions.
Remove the manual advance of s->pc for the "is VEX" case
(which is now done by x86_ldub_code()) and instead rewind
PC in the case where we decide that this isn't really VEX.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Cc: qemu-stable@nongnu.org
Reported-by: Alexandro Sanchez Bach <alexandro@phi.nz>
Message-Id: <1513163959-17545-1-git-send-email-peter.maydell@linaro.org>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
These gcc warnings are fixed:
target/i386/translate.c:4461:12: warning:
variable 'prefixes' might be clobbered by 'longjmp' or 'vfork' [-Wclobbered]
target/i386/translate.c:4466:9: warning:
variable 'rex_w' might be clobbered by 'longjmp' or 'vfork' [-Wclobbered]
target/i386/translate.c:4466:16: warning:
variable 'rex_r' might be clobbered by 'longjmp' or 'vfork' [-Wclobbered]
Tested with x86_64-w64-mingw32-gcc from Debian stretch.
Signed-off-by: Stefan Weil <sw@weilnetz.de>
Message-Id: <20171113064845.29142-1-sw@weilnetz.de>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
The value of HV_X64_MSR_SVERSION is initialized once at vcpu init, and
is reset to zero on vcpu reset, which is wrong.
It is supposed to be a constant, so drop the field from X86CPU, set the
msr with the constant value, and don't bother getting it.
Signed-off-by: Roman Kagan <rkagan@virtuozzo.com>
Message-Id: <20171122181418.14180-4-rkagan@virtuozzo.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Initially SINTx msrs should be in "masked" state. To ensure that
happens on *every* reset, move setting their values to
kvm_arch_vcpu_reset.
Signed-off-by: Roman Kagan <rkagan@virtuozzo.com>
Message-Id: <20171122181418.14180-3-rkagan@virtuozzo.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Hyper-V has a notion of partition-wide MSRs. Those MSRs are read and
written as usual on each VCPU, however the hypervisor maintains a single
global value for all VCPUs. Thus writing such an MSR from any single
VCPU affects the global value that is read by all other VCPUs.
This leads to an issue during VCPU hotplug: the zero-initialzied values
of those MSRs get synced into KVM and override the global values as has
already been set by the guest.
This change makes the partition-wide MSRs only be synchronized on the
first vcpu.
Signed-off-by: Evgeny Yakovlev <eyakovlev@virtuozzo.com>
Signed-off-by: Roman Kagan <rkagan@virtuozzo.com>
Message-Id: <20171122181418.14180-2-rkagan@virtuozzo.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Intel IceLake cpu has added new cpu features,AVX512_VBMI2/GFNI/
VAES/VPCLMULQDQ/AVX512_VNNI/AVX512_BITALG. Those new cpu features
need expose to guest VM.
The bit definition:
CPUID.(EAX=7,ECX=0):ECX[bit 06] AVX512_VBMI2
CPUID.(EAX=7,ECX=0):ECX[bit 08] GFNI
CPUID.(EAX=7,ECX=0):ECX[bit 09] VAES
CPUID.(EAX=7,ECX=0):ECX[bit 10] VPCLMULQDQ
CPUID.(EAX=7,ECX=0):ECX[bit 11] AVX512_VNNI
CPUID.(EAX=7,ECX=0):ECX[bit 12] AVX512_BITALG
The release document ref below link:
https://software.intel.com/sites/default/files/managed/c5/15/\
architecture-instruction-set-extensions-programming-reference.pdf
Signed-off-by: Yang Zhong <yang.zhong@intel.com>
Message-Id: <1511335676-20797-1-git-send-email-yang.zhong@intel.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
If we've already raised an exception (and set NORETURN),
do not emit unreachable code to raise a debug exception.
Note that gen_goto_tb takes single-stepping into account.
Signed-off-by: Richard Henderson <rth@twiddle.net>
Message-Id: <20170907185057.23421-4-richard.henderson@linaro.org>
Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
As for other targets, cmpxchg isn't quite right for ll/sc,
suffering from an ABA race, but is sufficient to implement
portable atomic operations.
Signed-off-by: Richard Henderson <rth@twiddle.net>
Message-Id: <20170907185057.23421-2-richard.henderson@linaro.org>
[aurel32: fix whitespace]
Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
This fixes bug #1735384 while running java under qemu-sh4. When debug
was enabled it showed a problem with TCG temps. Once fixed I was able
to run java -version normally.
Cc: qemu-stable@nongnu.org
Reported-by: John Paul Adrian Glaubitz <glaubitz@physik.fu-berlin.de>
Suggested-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Message-Id: <20171206093050.25308-1-alex.bennee@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Aurelien Jarno <aurelien@aurel32.net>
Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
applied using ./scripts/clean-includes
Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
this file in include in "target/i386/hax-i386.h":
#ifdef CONFIG_WIN32
#include "target/i386/hax-windows.h"
#endif
which guaranties that sysemu/os-win32.h is previously included (CONFIG_WIN32)
Suggested-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
applied using ./scripts/clean-includes
Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
applied using ./scripts/clean-includes
not needed since 7ebaf79556
Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Acked-by: David Gibson <david@gibson.dropbear.id.au>
Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
exec: housekeeping (funny since 02d0e09503)
applied using ./scripts/clean-includes
Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Acked-by: Cornelia Huck <cohuck@redhat.com>
Reviewed-by: Anthony PERARD <anthony.perard@citrix.com>
Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
Thanks to Laszlo Ersek for spotting the double semicolon in target/i386/kvm.c
I have trivially grepped the tree for ';;' in C files.
Suggested-by: Laszlo Ersek <lersek@redhat.com>
Signed-off-by: Ladi Prosek <lprosek@redhat.com>
Reviewed-by: Laszlo Ersek <lersek@redhat.com>
Reviewed-by: Cornelia Huck <cohuck@redhat.com>
Reviewed-by: Laurent Vivier <laurent@vivier.eu>
Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
- Lots of tcg improvements: ccw hotplug is now working and we can run
a Linux kernel built for z12 under tcg
- zPCI improvements to get virtio-pci working
- get rid of the cssid restrictions for virtual and non-virtual channel
devices
- we now support 8TB+ systems
- 2.12 compat machine
- fixes and cleanups
-----BEGIN PGP SIGNATURE-----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=xSZX
-----END PGP SIGNATURE-----
Merge remote-tracking branch 'remotes/cohuck/tags/s390x-20171215-v2' into staging
s390x changes for 2.12:
- Lots of tcg improvements: ccw hotplug is now working and we can run
a Linux kernel built for z12 under tcg
- zPCI improvements to get virtio-pci working
- get rid of the cssid restrictions for virtual and non-virtual channel
devices
- we now support 8TB+ systems
- 2.12 compat machine
- fixes and cleanups
# gpg: Signature made Fri 15 Dec 2017 10:57:01 GMT
# gpg: using RSA key 0xDECF6B93C6F02FAF
# gpg: Good signature from "Cornelia Huck <conny@cornelia-huck.de>"
# gpg: aka "Cornelia Huck <huckc@linux.vnet.ibm.com>"
# gpg: aka "Cornelia Huck <cornelia.huck@de.ibm.com>"
# gpg: aka "Cornelia Huck <cohuck@kernel.org>"
# gpg: aka "Cornelia Huck <cohuck@redhat.com>"
# Primary key fingerprint: C3D0 D66D C362 4FF6 A8C0 18CE DECF 6B93 C6F0 2FAF
* remotes/cohuck/tags/s390x-20171215-v2: (46 commits)
s390-ccw-virtio: allow for systems larger that 7.999TB
s390x: change the QEMU cpu model to a stripped down z12
s390x/tcg: we already implement the Set-Program-Parameter facility
s390x/tcg: implement extract-CPU-time facility
s390x/tcg: Implement SIGNAL ADAPTER instruction
s390x/tcg: Implement STORE CHANNEL PATH STATUS
s390x/tcg: wire up SET CHANNEL MONITOR
s390x/tcg: wire up SET ADDRESS LIMIT
s390x/tcg: implement Interlocked-Access Facility 2
s390x/tcg: ASI/ASGI/ALSI/ALSGI are atomic with Interlocked-acccess facility 1
s390x/tcg: wire up STORE CHANNEL REPORT WORD
s390x/tcg: indicate value of TODPR in STCKE
s390x/tcg: implement SET CLOCK PROGRAMMABLE FIELD
s390x/tcg: fix and cleanup mcck injection
s390x/kvm: factor out build_channel_report_mcic() into cpu.h
s390x/css: attach css bridge
s390x: deprecate s390-squash-mcss machine prop
s390x/css: unrestrict cssids
s390x/pci: search for subregion inside the BARs
s390x/pci: move the memory region write from pcistg
...
# Conflicts:
# include/hw/compat.h
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
and use them in a couple of obvious places. Other macros will be used
in the model of the XIVE interrupt controller.
Signed-off-by: Cédric Le Goater <clg@kaod.org>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
When a CPU is stopped with the 'stop-self' RTAS call, its state
'halted' is switched to 1 and, in this case, the MSR is not taken into
account anymore in the cpu_has_work() routine. Only the pending
hardware interrupts are checked with their LPCR:PECE* enablement bit.
If the DECR timer fires after 'stop-self' is called and before the CPU
'stop' state is reached, the nearly-dead CPU will have some work to do
and the guest will crash. This case happens very frequently with the
not yet upstream P9 XIVE exploitation mode. In XICS mode, the DECR is
occasionally fired but after 'stop' state, so no work is to be done
and the guest survives.
I suspect there is a race between the QEMU mainloop triggering the
timers and the TCG CPU thread but I could not quite identify the root
cause. To be safe, let's disable in the LPCR all the exceptions which
can cause an exit while the CPU is in power-saving mode and reenable
them when the CPU is started.
Signed-off-by: Cédric Le Goater <clg@kaod.org>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
and use the value to define precisely the default value of the LPCR in
the helper routine cpu_ppc_set_papr()
Signed-off-by: Cédric Le Goater <clg@kaod.org>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
Signed-off-by: Richard Henderson <rth@twiddle.net>
Reviewed-by: Daniel Henrique Barboza <danielhb@linux.vnet.ibm.com>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
We are good enough to boot upstream Linux kernels / Fedora 26/27. That
should be sufficient for now.
As the QEMU CPU model is migration safe, let's add compatibility code.
Generate the feature list to reduce the chance of messing things up in the
future.
Signed-off-by: David Hildenbrand <david@redhat.com>
Message-Id: <20171208165529.14124-1-david@redhat.com>
[CH: squashed 's390x/cpumodel: make qemu cpu model play with "none" machine'
(20171213132407.5227-1-david@redhat.com) and 's390x/tcg: don't include z13
features in the qemu model' (20171213171512.17601-1-david@redhat.com) into
patch]
Signed-off-by: Cornelia Huck <cohuck@redhat.com>
The Set-Program-Parameter facility (also known as Load-Program-Parameter
facility) provides the LPP instruction used to load the program
parameter. We already implement that instruction in TCG, so add it to our
list.
Note: Not documented in the PoP but in "The Load-Program-Parameter and
CPU-Measurement Facilities) - SA23-2260-05 document.
While at it, make the whole list ordered (according to cpu_features_def.h).
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: David Hildenbrand <david@redhat.com>
Message-Id: <20171208160207.26494-14-david@redhat.com>
Signed-off-by: Cornelia Huck <cohuck@redhat.com>
It only provides the EXTRACT CPU TIME instruction. We can reuse the stpt
helper, which calculates the CPU timer value.
As the instruction is not privileged, but we don't have a CPU timer
value in case of linux user, we simply reuse cpu_get_host_ticks() to
produce some descending value.
Signed-off-by: David Hildenbrand <david@redhat.com>
Message-Id: <20171208160207.26494-13-david@redhat.com>
Signed-off-by: Cornelia Huck <cohuck@redhat.com>
KVM suppresses SIGA, setting cc=3. Let's do the same for TCG, so we're at
least equal.
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: David Hildenbrand <david@redhat.com>
Message-Id: <20171208160207.26494-12-david@redhat.com>
Signed-off-by: Cornelia Huck <cohuck@redhat.com>
Just like KVM does, we should suppress this instruction:
When this instruction is not provided, it is
checked for privileged operation exception and the
instruction is suppressed by the machine
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: David Hildenbrand <david@redhat.com>
Message-Id: <20171208160207.26494-11-david@redhat.com>
Signed-off-by: Cornelia Huck <cohuck@redhat.com>
Let's just wire it up like KVM.
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: David Hildenbrand <david@redhat.com>
Message-Id: <20171208160207.26494-10-david@redhat.com>
Signed-off-by: Cornelia Huck <cohuck@redhat.com>
Let's handle it just like KVM:
Depending on the model, this instruction may not be
provided. When this instruction is not provided, it is
checked for operand exception and privileged-opera-
tion exception, and then is suppressed.
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: David Hildenbrand <david@redhat.com>
Message-Id: <20171208160207.26494-9-david@redhat.com>
Signed-off-by: Cornelia Huck <cohuck@redhat.com>
With this facility, OI/OIY, NI/NIY and XI/XIY are atomic. All operate on
one byte (MO_UB). Emulate old behavior.
Signed-off-by: David Hildenbrand <david@redhat.com>
Message-Id: <20171208160207.26494-8-david@redhat.com>
Signed-off-by: Cornelia Huck <cohuck@redhat.com>
The semantics of ASI/ASGI/ALSI/ALSGI changed. Let's implement them just
like LOAD AND ADD, so they are atomic. Emulate old behavior.
This fixes random crashes when booting a Linux kernel compiled for
z196+ with SMP + MTTCG.
Signed-off-by: David Hildenbrand <david@redhat.com>
Message-Id: <20171208160207.26494-7-david@redhat.com>
Signed-off-by: Cornelia Huck <cohuck@redhat.com>
We were not yet using the value of the TOD Programmable Register.
Reviewed-by: Thomas Huth <thuth@redhat.com>
Signed-off-by: David Hildenbrand <david@redhat.com>
Message-Id: <20171208160207.26494-5-david@redhat.com>
Signed-off-by: Cornelia Huck <cohuck@redhat.com>
Needed for machine check handling inside Linux (when restoring registers).
Except for SIGP and machine checks, we don't make use of the register
yet. Sufficient for now.
Reviewed-by: Thomas Huth <thuth@redhat.com>
Signed-off-by: David Hildenbrand <david@redhat.com>
Message-Id: <20171208160207.26494-4-david@redhat.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Cornelia Huck <cohuck@redhat.com>
The architecture mode indication wasn't stored. The split of certain
64bit fields was unnecessary. Also, the complete clock comparator, not
just bit 0-55 (starting at byte 1) was stored.
We now generate a proper MCIC via the same helper we use for KVM.
There is more to clean up, but we will change the other parts later on
either way.
Signed-off-by: David Hildenbrand <david@redhat.com>
Message-Id: <20171208160207.26494-3-david@redhat.com>
Signed-off-by: Cornelia Huck <cohuck@redhat.com>
We'll need it later on in two places. Refactor it to just indicate the
validity bits. While at it, introduce a define for the used CR14 bit (we'll
also need later on).
Signed-off-by: David Hildenbrand <david@redhat.com>
Message-Id: <20171208160207.26494-2-david@redhat.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Cornelia Huck <cohuck@redhat.com>
Only one user left, get rid of it so we don't get any new users.
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Signed-off-by: David Hildenbrand <david@redhat.com>
Message-Id: <20171130162744.25442-17-david@redhat.com>
Signed-off-by: Cornelia Huck <cohuck@redhat.com>
All users are gone, we can finally drop it and make sure that all new
program interrupt injections are reminded of the retaddr - as they have to
use s390_program_interrupt() now.
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Signed-off-by: David Hildenbrand <david@redhat.com>
Message-Id: <20171130162744.25442-16-david@redhat.com>
Signed-off-by: Cornelia Huck <cohuck@redhat.com>
STSI needs some more love, but let's do one step at a time.
We can now drop potential_page_fault().
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Signed-off-by: David Hildenbrand <david@redhat.com>
Message-Id: <20171130162744.25442-15-david@redhat.com>
Signed-off-by: Cornelia Huck <cohuck@redhat.com>
We can now drop updating the cc.
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: David Hildenbrand <david@redhat.com>
Message-Id: <20171130162744.25442-13-david@redhat.com>
Signed-off-by: Cornelia Huck <cohuck@redhat.com>
Now we can drop the two save statements in the translate function.
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: David Hildenbrand <david@redhat.com>
Message-Id: <20171130162744.25442-12-david@redhat.com>
Signed-off-by: Cornelia Huck <cohuck@redhat.com>
Now we can drop potential_page_fault(). While at it, move the
unlock further up, looks cleaner.
Signed-off-by: David Hildenbrand <david@redhat.com>
Message-Id: <20171130162744.25442-11-david@redhat.com>
Signed-off-by: Cornelia Huck <cohuck@redhat.com>
As we handle the retaddr in all cases properly now, we can drop it.
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Signed-off-by: David Hildenbrand <david@redhat.com>
Message-Id: <20171130162744.25442-10-david@redhat.com>
Signed-off-by: Cornelia Huck <cohuck@redhat.com>
s390_cpu_virt_mem_rw() must always return, so callers can react on
an exception (e.g. see ioinst_handle_stcrw()).
Therefore, using program_interrupt() is wrong. Fix that up.
Signed-off-by: David Hildenbrand <david@redhat.com>
Message-Id: <20171130162744.25442-9-david@redhat.com>
Signed-off-by: Cornelia Huck <cohuck@redhat.com>
s390_cpu_virt_mem_rw() must always return, so callers can react on
an exception (e.g. see ioinst_handle_stcrw()).
However, for TCG we always have to exit the cpu loop (and restore the
cpu state before that) if we injected a program interrupt. So let's
introduce and use s390_cpu_virt_mem_handle_exc() in code that is not
purely KVM.
Directly pass the retaddr we already have available in these functions.
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: David Hildenbrand <david@redhat.com>
Message-Id: <20171130162744.25442-8-david@redhat.com>
Signed-off-by: Cornelia Huck <cohuck@redhat.com>
Needed to later drop potential_page_fault() from the diag TCG translate
function.
Convert program_interrupt() to s390_program_interrupt() directly, making
use of the passed address.
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: David Hildenbrand <david@redhat.com>
Message-Id: <20171130162744.25442-7-david@redhat.com>
Signed-off-by: Cornelia Huck <cohuck@redhat.com>
Once we wire up TCG, we will need the retaddr to correctly inject
program interrupts. As we want to get rid of the function
program_interrupt(), convert PCI code too.
For KVM, we can simply use RA_IGNORED.
Convert program_interrupt() to s390_program_interrupt() directly, making
use of the passed address.
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Signed-off-by: David Hildenbrand <david@redhat.com>
Message-Id: <20171130162744.25442-6-david@redhat.com>
Signed-off-by: Cornelia Huck <cohuck@redhat.com>
