Renaming defines for quad in their various forms so that their signedness is
now explicit.
Done using git grep as suggested by Philippe, with a bit of hand edition to
keep assignments aligned.
Signed-off-by: Frédéric Pétrot <frederic.petrot@univ-grenoble-alpes.fr>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Message-id: 20220106210108.138226-2-frederic.petrot@univ-grenoble-alpes.fr
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
In the SSE decode function gen_sse(), we combine a byte
'b' and a value 'b1' which can be [0..3], and switch on them:
b |= (b1 << 8);
switch (b) {
...
default:
unknown_op:
gen_unknown_opcode(env, s);
return;
}
In three cases inside this switch, we were then also checking for
"if (b1 >= 2) { goto unknown_op; }".
However, this can never happen, because the 'case' values in each place
are 0x0nn or 0x1nn and the switch will have directed the b1 == (2, 3)
cases to the default already.
This check was added in commit c045af25a5 in 2010; the added code
was unnecessary then as well, and was apparently intended only to
ensure that we never accidentally ended up indexing off the end
of an sse_op_table with only 2 entries as a result of future bugs
in the decode logic.
Change the checks to assert() instead, and make sure they're always
immediately before the array access they are protecting.
Fixes: Coverity CID 1460207
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
mmu_translate is supposed to return an error code for page faults; it is
not able to handle other exceptions. The #GP case for noncanonical
virtual addresses is not handled correctly, and incorrectly raised as
a page fault with error code 1. Since it cannot happen for nested
page tables, move it directly to handle_mmu_fault, even before the
invocation of mmu_translate.
Fixes: #676
Fixes: 661ff4879e ("target/i386: extract mmu_translate", 2021-05-11)
Cc: qemu-stable@nongnu.org
Tested-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Correctly look up the paging mode of the hypervisor when it is using 64-bit
mode but the guest is not.
Fixes: 68746930ae ("target/i386: use mmu_translate for NPT walk", 2021-05-11)
Cc: qemu-stable@nongnu.org
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Record cr2, error_code, and exception_index. That last means
that we must exit to cpu_loop ourselves, instead of letting
exception_index being overwritten.
Use the maperr parameter to properly set PG_ERROR_P_MASK.
Reviewed by: Warner Losh <imp@bsdimp.com>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
We were using singlestep_enabled as a proxy for whether
translator_use_goto_tb would always return false.
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
We're about to move this out of tcg.h, so rename it
as we did when moving MemOp.
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Following the logic of commit 30493a030f ("i386: split seg_helper
into user-only and sysemu parts"), move x86_cpu_exec_interrupt()
under sysemu/seg_helper.c.
Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-By: Warner Losh <imp@bsdimp.com>
Message-Id: <20210911165434.531552-12-f4bug@amsat.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Restrict cpu_exec_interrupt() and its callees to sysemu.
Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Reviewed-by: Warner Losh <imp@bsdimp.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20210911165434.531552-11-f4bug@amsat.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
do_interrupt() is sysemu specific. However due to some X86
specific hack, it is also used in user-mode emulation, which
is why it couldn't be restricted to CONFIG_SOFTMMU (see the
comment around added in commit 78271684719: "cpu: tcg_ops:
move to tcg-cpu-ops.h, keep a pointer in CPUClass").
Keep the hack but rename the handler as fake_user_interrupt()
and restrict do_interrupt() to sysemu.
Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Reviewed-by: Warner Losh <imp@bsdimp.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20210911165434.531552-6-f4bug@amsat.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Merge two TARGET_X86_64 consecutive blocks.
Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Reviewed-by: Warner Losh <imp@bsdimp.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20210911165434.531552-4-f4bug@amsat.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Ilya Leoshkevich <iii@linux.ibm.com>
[rth: Split out of a larger patch.]
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
The feature allows the VMSAVE and VMLOAD instructions to execute in guest mode without
causing a VMEXIT. (APM2 15.33.1)
Signed-off-by: Lara Lazier <laramglazier@gmail.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Writes to cr8 affect v_tpr. This could set or unset an interrupt
request as the priority might have changed.
Signed-off-by: Lara Lazier <laramglazier@gmail.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
The APM2 states that if V_IGN_TPR is nonzero, the current
virtual interrupt ignores the (virtual) TPR.
Signed-off-by: Lara Lazier <laramglazier@gmail.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
VGIF provides masking capability for when virtual interrupts
are taken. (APM2)
Signed-off-by: Lara Lazier <laramglazier@gmail.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Moved int_ctl into the CPUX86State structure. It removes some
unnecessary stores and loads, and prepares for tracking the vIRQ
state even when it is masked due to vGIF.
Signed-off-by: Lara Lazier <laramglazier@gmail.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
VGIF allows STGI and CLGI to execute in guest mode and control virtual
interrupts in guest mode.
When the VGIF feature is enabled then:
* executing STGI in the guest sets bit 9 of the VMCB offset 60h.
* executing CLGI in the guest clears bit 9 of the VMCB offset 60h.
Signed-off-by: Lara Lazier <laramglazier@gmail.com>
Message-Id: <20210730070742.9674-1-laramglazier@gmail.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
APM2 requires that VMRUN and VMLOAD canonicalize (sign extend to 63
from 48/57) all base addresses in the segment registers that have been
respectively loaded.
Signed-off-by: Lara Lazier <laramglazier@gmail.com>
Message-Id: <20210804113058.45186-1-laramglazier@gmail.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
~0UL has 64 bits on Linux and 32 bits on Windows.
Fixes: https://gitlab.com/qemu-project/qemu/-/issues/512
Reported-by: Volker Rümelin <vr_qemu@t-online.de>
Signed-off-by: Lara Lazier <laramglazier@gmail.com>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Message-Id: <20210812111056.26926-1-laramglazier@gmail.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
The shift constant was incorrect, causing int_prio to always be zero.
Signed-off-by: Lara Lazier <laramglazier@gmail.com>
[Rewritten commit message since v1 had already been included. - Paolo]
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
VMRUN exits with SVM_EXIT_ERR if either:
* The event injected has a reserved type.
* When the event injected is of type 3 (exception), and the vector that
has been specified does not correspond to an exception.
This does not fix the entire exc_inj test in kvm-unit-tests.
Signed-off-by: Lara Lazier <laramglazier@gmail.com>
Message-Id: <20210725090855.19713-1-laramglazier@gmail.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Some cpu properties have to be set only for cpu models in builtin_x86_defs,
registered with x86_register_cpu_model_type, and not for
cpu models "base", "max", and the subclass "host".
These properties are the ones set by function x86_cpu_apply_props,
(also including kvm_default_props, tcg_default_props),
and the "vendor" property for the KVM and HVF accelerators.
After recent refactoring of cpu, which also affected these properties,
they were instead set unconditionally for all x86 cpus.
This has been detected as a bug with Nested on AMD with cpu "host",
as svm was not turned on by default, due to the wrongful setting of
kvm_default_props via x86_cpu_apply_props, which set svm to "off".
Rectify the bug introduced in commit "i386: split cpu accelerators"
and document the functions that are builtin_x86_defs-only.
Signed-off-by: Claudio Fontana <cfontana@suse.de>
Tested-by: Alexander Bulekov <alxndr@bu.edu>
Fixes: f5cc5a5c ("i386: split cpu accelerators from cpu.c,"...)
Resolves: https://gitlab.com/qemu-project/qemu/-/issues/477
Message-Id: <20210723112921.12637-1-cfontana@suse.de>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
All MBZ in CR3 must be zero (APM2 15.5)
Added checks in both helper_vmrun and helper_write_crN.
When EFER.LMA is zero the upper 32 bits needs to be zeroed.
Signed-off-by: Lara Lazier <laramglazier@gmail.com>
Message-Id: <20210723112740.45962-1-laramglazier@gmail.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
EFER.SVME has to be set, and EFER reserved bits must
be zero.
In addition the combinations
* EFER.LMA or EFER.LME is non-zero and the processor does not support LM
* non-zero EFER.LME and CR0.PG and zero CR4.PAE
* non-zero EFER.LME and CR0.PG and zero CR0.PE
* non-zero EFER.LME, CR0.PG, CR4.PAE, CS.L and CS.D
are all invalid.
(AMD64 Architecture Programmer's Manual, V2, 15.5)
Signed-off-by: Lara Lazier <laramglazier@gmail.com>
Message-Id: <20210721152651.14683-3-laramglazier@gmail.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
All MBZ bits in CR4 must be zero. (APM2 15.5)
Added reserved bitmask and added checks in both
helper_vmrun and helper_write_crN.
Signed-off-by: Lara Lazier <laramglazier@gmail.com>
Message-Id: <20210721152651.14683-2-laramglazier@gmail.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
The APM2 states that The processor takes a virtual INTR interrupt
if V_IRQ and V_INTR_PRIO indicate that there is a virtual interrupt pending
whose priority is greater than the value in V_TPR.
Signed-off-by: Lara Lazier <laramglazier@gmail.com>
Message-Id: <20210721152651.14683-1-laramglazier@gmail.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
The hook is now unused, with breakpoints checked outside translation.
Tested-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Return false for RF set, as we do in i386_tr_breakpoint_check.
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Always provide the atomic interface using TCGMemOpIdx oi
and uintptr_t retaddr. Rename from helper_* to cpu_* so
as to (mostly) match the exec/cpu_ldst.h functions, and
to emphasize that they are not callable from TCG directly.
Tested-by: Cole Robinson <crobinso@redhat.com>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Update FCS:FIP and FDS:FDP according to the Intel Manual Vol.1 8.1.8.
Note that CPUID.(EAX=07H,ECX=0H):EBX[bit 13] is not implemented by
design in this patch and will be added along with TCG features flag
in a separate patch later.
Signed-off-by: Ziqiao Kong <ziqiaokong@gmail.com>
Message-Id: <20210530150112.74411-2-ziqiaokong@gmail.com>
[rth: Push FDS/FDP handling down into mod != 3 case; free last_addr.]
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Do not call helper_fninit directly from helper_xrstor.
Do call the new helper from do_fsave.
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
A new pair of braces has to be added to declare variables in the case block.
The code style is also fixed according to the transalte.c itself during the
code motion.
Signed-off-by: Ziqiao Kong <ziqiaokong@gmail.com>
Message-Id: <20210530150112.74411-1-ziqiaokong@gmail.com>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Since cpu_breakpoint and cpu_watchpoint are in a union,
the code should access only one of them.
Signed-off-by: Dmitry Voronetskiy <davoronetskiy@gmail.com>
Message-Id: <20210613180838.21349-1-davoronetskiy@gmail.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
The loop is performing a simple boolean test for the existence
of a BP_CPU breakpoint at EIP. Plus it gets the iteration wrong,
if we happen to have a BP_GDB breakpoint at the same address.
We have a function for this: cpu_breakpoint_test.
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Eduardo Habkost <ehabkost@redhat.com>
Message-Id: <20210620062317.1399034-1-richard.henderson@linaro.org>
Just use translator_use_goto_tb directly at the one call site,
rather than maintaining a local wrapper.
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
The root trace-events only declares a single TCG event:
$ git grep -w tcg trace-events
trace-events:115:# tcg/tcg-op.c
trace-events:137:vcpu tcg guest_mem_before(TCGv vaddr, uint16_t info) "info=%d", "vaddr=0x%016"PRIx64" info=%d"
and only a tcg/tcg-op.c uses it:
$ git grep -l trace_guest_mem_before_tcg
tcg/tcg-op.c
therefore it is pointless to include "trace-tcg.h" in each target
(because it is not used). Remove it.
Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Message-Id: <20210629050935.2570721-1-f4bug@amsat.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Use raise_exception_ra (without error code) when raising the illegal
opcode operation; raise #GP when setting bits 63:32 of DR6 or DR7.
Move helper_get_dr to sysemu/ since it is a privileged instruction
that is not needed on user-mode emulators.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
DR6[63:32] and DR7[63:32] are reserved and need to be zero.
(AMD64 Architecture Programmer's Manual, V2, 15.5)
Signed-off-by: Lara Lazier <laramglazier@gmail.com>
Message-Id: <20210705081802.18960-3-laramglazier@gmail.com>
[Ignore for 32-bit builds. - Paolo]
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
The address of the last entry in the MSRPM and
in the IOPM must be smaller than the largest physical address.
(APM2 15.10-15.11)
Signed-off-by: Lara Lazier <laramglazier@gmail.com>
Message-Id: <20210705081802.18960-2-laramglazier@gmail.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Given that TCG is now the only consumer of X86XSaveArea, move the
structure definition and associated offset declarations and checks to a
TCG specific header.
Signed-off-by: David Edmondson <david.edmondson@oracle.com>
Message-Id: <20210705104632.2902400-9-david.edmondson@oracle.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Rather than relying on the X86XSaveArea structure definition,
determine the offset of XSAVE state areas using CPUID leaf 0xd where
possible (KVM and HVF).
Signed-off-by: David Edmondson <david.edmondson@oracle.com>
Message-Id: <20210705104632.2902400-8-david.edmondson@oracle.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Use a break instead of an ifdefed else.
There's no need to move the values through s->T0.
Remove TCG_BSWAP_IZ and the preceding zero-extension.
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Implement the new semantics in the fallback expansion.
Change all callers to supply the flags that keep the
semantics unchanged locally.
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
When the selective CR0 write intercept is set, all writes to bits in
CR0 other than CR0.TS or CR0.MP cause a VMEXIT.
Signed-off-by: Lara Lazier <laramglazier@gmail.com>
Message-Id: <20210616123907.17765-5-laramglazier@gmail.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
The combination of unset CD and set NW bit in CR0 is illegal.
CR0[63:32] are also reserved and need to be zero.
(AMD64 Architecture Programmer's Manual, V2, 15.5)
Signed-off-by: Lara Lazier <laramglazier@gmail.com>
Message-Id: <20210616123907.17765-4-laramglazier@gmail.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
