The use of DEVICE_NATIVE_ENDIAN cleans up lots of ifdefs in
many of the callers.
Signed-off-by: Richard Henderson <rth@twiddle.net>
Signed-off-by: Avi Kivity <avi@redhat.com>
Slightly non-obvious with mips_jazz passing in the region
structure to populate.
Signed-off-by: Richard Henderson <rth@twiddle.net>
Signed-off-by: Avi Kivity <avi@redhat.com>
This is based on the original fix by Hervé Poussineau: pc_memory_init
actually takes a memory region for mapping BIOS and extension ROMs. That
equals the PCI memory region if PCI is available, but must be system
memory in the ISA case.
Signed-off-by: Jan Kiszka <jan.kiszka@siemens.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
The current implementation of PAM and the PCI holes is broken in several
ways:
- PCI BARs are not restricted to the PCI hole (a BAR may hide memory)
- PCI devices do not respect PAM (if a PCI device maps a region while
PAM maps the region to RAM, the request will be honored)
This patch fixes things by introducing a pci address space, and using
memory region aliases to represent PAM regions, SMRAM, and PCI holes.
The memory hierarchy looks something like
system_memory
|
+--- low memory alias (0-0xe0000000)
| |
| +-- ram@0
|
+--- high memory alias (0x100000000-EOM)
| |
| +-- ram@0xe0000000
|
+--- pci hole alias (end of low memory-0x100000000)
| |
| +-- pci@end-of-low-memory
|
|
+--- pam[n] (0xc0000-0xc3fff etc) (when set to pci, priority 1)
| |
| +-- pci@0xc4000 etc
|
+--- smram (0xa0000-0xbffff) (when set to pci/vga, priority 1)
|
+-- pci@0xa0000 etc
ram (simple ram region)
pci
|
+--- BARn
|
+--- VGA 0xa0000-0xbffff
|
+--- ROMs
Signed-off-by: Avi Kivity <avi@redhat.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
Instead, use the bus accessors, or get the address space directly
from the board constructor.
Signed-off-by: Avi Kivity <avi@redhat.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
This lets us register BARs in the I/O address space.
Reviewed-by: Richard Henderson <rth@twiddle.net>
Reviewed-by: Anthony Liguori <aliguori@us.ibm.com>
Signed-off-by: Avi Kivity <avi@redhat.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
This is now done sloppily, via get_system_memory(). Eventually callers
will be converted to stop using that.
Reviewed-by: Anthony Liguori <aliguori@us.ibm.com>
Signed-off-by: Avi Kivity <avi@redhat.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
While eventually this should come from the machine initialization function,
take a short cut to avoid converting all machines now.
Reviewed-by: Anthony Liguori <aliguori@us.ibm.com>
Signed-off-by: Avi Kivity <avi@redhat.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
Compared to the last version I only added a comment to the code.
- remove i440FX-xen and i440fx_write_config_xen
we don't need to intercept pci config writes to i440FX anymore;
- introduce PIIX3-xen and piix3_write_config_xen
we do need to intercept pci config write to the PCI-ISA bridge to update
the PCI link routing;
- set the number of PIIX3-xen interrupts line to 128;
Signed-off-by: Stefano Stabellini <stefano.stabellini@eu.citrix.com>
Signed-off-by: Alexander Graf <agraf@suse.de>
This patch introduces Xen specific call in piix_pci.
The specific part for Xen is in write_config, set_irq and get_pirq.
Signed-off-by: Anthony PERARD <anthony.perard@citrix.com>
Signed-off-by: Stefano Stabellini <stefano.stabellini@eu.citrix.com>
Acked-by: Alexander Graf <agraf@suse.de>
Signed-off-by: Alexander Graf <agraf@suse.de>
This is because there is not synchronisation of the vcpu register
between Xen and QEMU, so vmport can't work properly.
This patch introduces no_vmport parameter to pc_basic_device_init.
Signed-off-by: Anthony PERARD <anthony.perard@citrix.com>
Signed-off-by: Alexander Graf <agraf@suse.de>
This patch moves above_4g_mem_size and below_4g_mem_size calculation in
the caller of pc_memory_init (pc_init1). And the prototype of
pc_memory_init is changed because there is no need anymore to have
variable pointer and the ram_size parameter.
Signed-off-by: Anthony PERARD <anthony.perard@citrix.com>
Signed-off-by: Alexander Graf <agraf@suse.de>
Turn fdc_init_isa into an inline function.
Get floppy geometry directly from the drives.
Don't expose FDCtrl.
Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
Drives defined with -drive if=ide get get created along with the IDE
controller, inside machine->init(). That's before cmos_init().
Drives defined with -device get created during generic device init.
That's after cmos_init(). Because of that, CMOS has no information on
them (type, geometry, translation). Older versions of Windows such as
XP reportedly choke on that.
Split off the part of CMOS initialization that needs to know about
-device devices, and turn it into a reset handler, so it runs after
device creation.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
The ram_size parameter can be larger than an int, so it may be truncated.
Fix by using the correct type.
Signed-off-by: Avi Kivity <avi@redhat.com>
Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
remove global variables, gpe and pci0_status by moving them
into PIIX4PMState.
Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
Signed-off-by: Isaku Yamahata <yamahata@valinux.co.jp>
Acked-by: Gerd Hoffmann <kraxel@redhat.com>
Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
To match rtc_xxx with qdev, make rtc_xxx accept and return ISADevice
instead of RTCState.
Signed-off-by: Isaku Yamahata <yamahata@valinux.co.jp>
Acked-by: Gerd Hoffmann <kraxel@redhat.com>
Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
Finally, we can safely split out the piix specific part from pc.c
into pc_piix.c.
Signed-off-by: Isaku Yamahata <yamahata@valinux.co.jp>
Acked-by: Gerd Hoffmann <kraxel@redhat.com>
Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
By introducing a registering function, make pc_init1() not refer to
ferr_irq directly in order to make ferr_irq piix independent.
Later pc_init1() will be split out into another file keeping ferr_irq
static.
Signed-off-by: Isaku Yamahata <yamahata@valinux.co.jp>
Acked-by: Gerd Hoffmann <kraxel@redhat.com>
Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
make cpu_smm_update() generic to be independent on i440fx by
registering a callback.
Signed-off-by: Isaku Yamahata <yamahata@valinux.co.jp>
Acked-by: Gerd Hoffmann <kraxel@redhat.com>
Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
updated version of an old patch
http://xenon.stanford.edu/~eswierk/misc/qemu-linuxbios/qemu-piix-ram-size.patch
that together with
http://www.mail-archive.com/linuxbios@linuxbios.org/msg02390.html
(which is already in coreboot trunk) allows coreboot to autodetect the amount of RAM within qemu/kvm from a register in i440 northbridge.
The message on the old patch states:
Unfortunately the current version of qemu does not set these
registers, but I have patched qemu so that it emulates the i440 more
faithfully in this regard.
Signed-off-by: Bernhard M. Wiedemann <qemudevbmw@lsmod.de>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
x86 definitions (especially CPUState uses) prevent many files from
being compiled within libhw.
Move x86 specific declarations (APIC stuff) to a separate file.
Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
Hi,
Kevin and I have agreed on the approach for this one now. So here is
the latest version of the patch for QEMU, submitting e820 reservation
entries via fw_cfg.
Cheers,
Jes
Use qemu-cfg to provide the BIOS with an optional table of e820 entries.
Notify the BIOS of the location of the TSS+EPT range to by reserving
it via the e820 table.
This matches a corresponding patch for Seabios, however older versions
of Seabios will default to the hardcoded address range and stay
compatible with current QEMU.
Signed-off-by: Jes Sorensen <Jes.Sorensen@redhat.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
Many (most?) serial interfaces have a programmable
clock which provides the reference frequency ("baudbase").
So a fixed baudbase which is only set once can be wrong.
omap1.c is an example which could use the new interface
to change baudbase when the programmable clock changes.
ar7 system emulation (still not part of standard QEMU)
is similar to omap and already uses serial_set_frequency.
Signed-off-by: Stefan Weil <weil@mail.berlios.de>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
It was used for Acer Pica 61 emulation, removed in 2008
Signed-off-by: Juan Quintela <quintela@redhat.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
Everything using standard isa I/O ports and IRQ windup is considerd
being an actual isa device. That are all serial_init() users except
mips_mipssim() which seems to have a non-standard IRQ windup.
baud rate is fixed at 115200 now as no caller passed in something else.
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
Switch over acpi-based PCI hotplug for pc over to the new
qdev-based pci hotplugging.
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
