This avoids a "#ifdef HOST_WORDS_BIGENDIAN" and this is the purpose
of PIXMAN_BE_* macros.
Signed-off-by: Laurent Vivier <lvivier@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Reviewed-by: Sahid Orentino Ferdjaoui <sahid.ferdjaoui@redhat.com>
Message-id: 20170403114044.15762-1-lvivier@redhat.com
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Catch an invalid state early, before a potential use-after-free. This is
mainly useful for documentation purposes.
Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Message-id: 20170406120513.638-2-marcandre.lureau@redhat.com
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Move opaque to 2nd instead of the 2nd to last, so that compilers help
check with the conversion.
Signed-off-by: Fam Zheng <famz@redhat.com>
Message-Id: <20170421122710.15373-7-famz@redhat.com>
Reviewed-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
[Commit message typo corrected]
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Signed-off-by: Max Reitz <mreitz@redhat.com>
Message-Id: <20170413160952.29918-1-mreitz@redhat.com>
Reviewed-by: Fam Zheng <famz@redhat.com>
Reviewed-by: Jeff Cody <jcody@redhat.com>
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Signed-off-by: Markus Armbruster <armbru@redhat.com>
The FTGMAC100 device is an Ethernet controller with DMA function that
can be found on Aspeed SoCs (which include NCSI).
It is fully compliant with IEEE 802.3 specification for 10/100 Mbps
Ethernet and IEEE 802.3z specification for 1000 Mbps Ethernet and
includes Reduced Media Independent Interface (RMII) and Reduced
Gigabit Media Independent Interface (RGMII) interfaces. It adopts an
AHB bus interface and integrates a link list DMA engine with direct
M-Bus accesses for transmitting and receiving packets. It has
independent TX/RX fifos, supports half and full duplex (1000 Mbps mode
only supports full duplex), flow control for full duplex and
backpressure for half duplex.
The FTGMAC100 also implements IP, TCP, UDP checksum offloads and
supports IEEE 802.1Q VLAN tag insertion and removal. It offers
high-priority transmit queue for QoS and CoS applications
This model is backed with a RealTek 8211E PHY which is the chip found
on the AST2500 EVB. It is complete enough to satisfy two different
Linux drivers and a U-Boot driver. Not supported features are :
- IEEE 802.1Q VLAN
- High Priority Transmit Queue
- Wake-On-LAN functions
The code is based on the Coldfire Fast Ethernet Controller model.
Signed-off-by: Cédric Le Goater <clg@kaod.org>
Signed-off-by: Jason Wang <jasowang@redhat.com>
This adds comments on the Basic mode control and status registers bit
definitions. It also adds a couple of bits for 1000BASE-T and the
RealTek 8211E PHY for the FTGMAC100 model to use.
Signed-off-by: Cédric Le Goater <clg@kaod.org>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Signed-off-by: Jason Wang <jasowang@redhat.com>
If colo-compare find one old packet,we can notify colo-frame
do checkpoint, no need continue find more old packet here.
Signed-off-by: Zhang Chen <zhangchen.fnst@cn.fujitsu.com>
Signed-off-by: Jason Wang <jasowang@redhat.com>
Use the new type in virtio-9p-device.
Signed-off-by: Stefano Stabellini <stefano@aporeto.com>
Reviewed-by: Greg Kurz <groug@kaod.org>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
CC: anthony.perard@citrix.com
CC: jgross@suse.com
CC: Aneesh Kumar K.V <aneesh.kumar@linux.vnet.ibm.com>
CC: Greg Kurz <groug@kaod.org>
Do not use the ring.h header installed on the system. Instead, import
the header into the QEMU codebase. This avoids problems when QEMU is
built against a Xen version too old to provide all the ring macros.
Signed-off-by: Stefano Stabellini <stefano@aporeto.com>
Reviewed-by: Greg Kurz <groug@kaod.org>
CC: anthony.perard@citrix.com
CC: jgross@suse.com
Instead of trying to guess the Xen version to use by compiling various
test programs first just ask the system via pkg-config. Only if it
can't return the version fall back to the test program scheme.
If configure is being called with dedicated flags for the Xen libraries
use those instead of the pkg-config output. This will avoid breaking
an in-tree Xen build of an old Xen version while a new Xen version is
installed on the build machine: pkg-config would pick up the installed
Xen config files as the Xen tree wouldn't contain any of them.
Signed-off-by: Juergen Gross <jgross@suse.com>
Signed-off-by: Stefano Stabellini <sstabellini@kernel.org>
Tested-by: Paul Durrant <paul.durrant@citrix.com>
Reviewed-by: Stefano Stabellini <sstabellini@kernel.org>
Commit f0f272baf3a7 "xen: use libxendevice model to restrict operations"
added a command-line option (-xen-domid-restrict) to limit operations
using the libxendevicemodel API to a specified domid. The commit also
noted that the restriction would be extended to cover operations issued
via other xen libraries by subsequent patches.
My recent Xen patch [1] added a call to the xenforeignmemory API to allow
it to be restricted. This patch now makes use of that new call when the
-xen-domid-restrict option is passed.
[1] http://xenbits.xen.org/gitweb/?p=xen.git;a=commit;h=5823d6eb
Signed-off-by: Paul Durrant <paul.durrant@citrix.com>
Signed-off-by: Stefano Stabellini <sstabellini@kernel.org>
Reviewed-by: Stefano Stabellini <sstabellini@kernel.org>
This patch adds a command-line option (-xen-domid-restrict) which will
use the new libxendevicemodel API to restrict devicemodel [1] operations
to the specified domid. (Such operations are not applicable to the xenpv
machine type).
This patch also adds a tracepoint to allow successful enabling of the
restriction to be monitored.
[1] I.e. operations issued by libxendevicemodel. Operation issued by other
xen libraries (e.g. libxenforeignmemory) are currently still unrestricted
but this will be rectified by subsequent patches.
Signed-off-by: Paul Durrant <paul.durrant@citrix.com>
Reviewed-by: Stefano Stabellini <sstabellini@kernel.org>
Today qemu is using e.g. the value 480 for Xen version 4.8.0. As some
Xen version tests are using ">" relations this scheme will lead to
problems when Xen version 4.10.0 is being reached.
Instead of the 3 digit schem use a 5 digit scheme (e.g. 40800 for
version 4.8.0).
Signed-off-by: Juergen Gross <jgross@suse.com>
Signed-off-by: Stefano Stabellini <sstabellini@kernel.org>
Reviewed-by: Stefano Stabellini <sstabellini@kernel.org>
This patch modifies the wrapper functions in xen_common.h to use the
new xendevicemodel interface if it is available along with compatibility
code to use the old libxenctrl interface if it is not.
Signed-off-by: Paul Durrant <paul.durrant@citrix.com>
Signed-off-by: Stefano Stabellini <sstabellini@kernel.org>
Reviewed-by: Anthony Perard <anthony.perard@citrix.com>
Reviewed-by: Stefano Stabellini <sstabellini@kernel.org>
This patch adds code in configure to set CONFIG_XEN_CTRL_INTERFACE_VERSION
to a new value of 490 if libxendevicemodel is present in the build
environment.
Signed-off-by: Paul Durrant <paul.durrant@citrix.com>
Signed-off-by: Stefano Stabellini <sstabellini@kernel.org>
Reviewed-by: Anthony Perard <anthony.perard@citrix.com>
Reviewed-by: Stefano Stabellini <sstabellini@kernel.org>
-----BEGIN PGP SIGNATURE-----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=EsZ5
-----END PGP SIGNATURE-----
Merge remote-tracking branch 'remotes/juanquintela/tags/migration/20170421' into staging
migration/next for 20170421
# gpg: Signature made Fri 21 Apr 2017 11:28:13 BST
# gpg: using RSA key 0xF487EF185872D723
# gpg: Good signature from "Juan Quintela <quintela@redhat.com>"
# gpg: aka "Juan Quintela <quintela@trasno.org>"
# Primary key fingerprint: 1899 FF8E DEBF 58CC EE03 4B82 F487 EF18 5872 D723
* remotes/juanquintela/tags/migration/20170421: (65 commits)
hmp: info migrate_parameters format tunes
hmp: info migrate_capability format tunes
migration: rename max_size to threshold_size
migration: set current_active_state once
virtio-rng: stop virtqueue while the CPU is stopped
migration: don't close a file descriptor while it can be in use
ram: Remove migration_bitmap_extend()
migration: Disable hotplug/unplug during migration
qdev: Move qdev_unplug() to qdev-monitor.c
qdev: Export qdev_hot_removed
qdev: qdev_hotplug is really a bool
migration: Remove MigrationState parameter from migration_is_idle()
ram: Use RAMBitmap type for coherence
ram: rename last_ram_offset() last_ram_pages()
ram: Use ramblock and page offset instead of absolute offset
ram: Change offset field in PageSearchStatus to page
ram: Remember last_page instead of last_offset
ram: Use page number instead of an address for the bitmap operations
ram: reorganize last_sent_block
ram: ram_discard_range() don't use the mis parameter
...
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
- the new compat machine
- several cleanups and optimizations
- introspection for css ids
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1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=QDBR
-----END PGP SIGNATURE-----
Merge remote-tracking branch 'remotes/cohuck/tags/s390x-20170421' into staging
The first batch of s390x changes for 2.10:
- the new compat machine
- several cleanups and optimizations
- introspection for css ids
# gpg: Signature made Fri 21 Apr 2017 08:36:25 BST
# gpg: using RSA key 0xDECF6B93C6F02FAF
# gpg: Good signature from "Cornelia Huck <huckc@linux.vnet.ibm.com>"
# gpg: aka "Cornelia Huck <cornelia.huck@de.ibm.com>"
# Primary key fingerprint: C3D0 D66D C362 4FF6 A8C0 18CE DECF 6B93 C6F0 2FAF
* remotes/cohuck/tags/s390x-20170421:
s390x: Drop useless casts
s390x: register I/O adapters per ISC during init
s390x/flic: cache flic in s390_get_flic
s390x: initialize flic before I/O subsystems
s390x: use enum for adapter type and standardize its naming
s390x/css: consolidate the devno property for ccw devices
s390x/css: provide introspection for virtual subchannel and device busid
s390x/css: introduce read-only property type for device ids
s390x/pci: make printf always compile in debug output
s390x/kvm: make printf always compile in debug output
s390x: introduce 2.10 compat machine
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Do the same (one per line) to the parameter list.
CC: "Dr. David Alan Gilbert" <dgilbert@redhat.com>
Signed-off-by: Peter Xu <peterx@redhat.com>
Reviewed-by: "Dr. David Alan Gilbert" <dgilbert@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Reviewed-by: Juan Quintela <quintela@redhat.com>
Signed-off-by: Juan Quintela <quintela@redhat.com>
Dump the info in a single line is hard to read. Do it one per line.
Also, the first "capabilities:" didn't help much. Let's remove it.
CC: "Dr. David Alan Gilbert" <dgilbert@redhat.com>
Signed-off-by: Peter Xu <peterx@redhat.com>
Reviewed-by: "Dr. David Alan Gilbert" <dgilbert@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Reviewed-by: Juan Quintela <quintela@redhat.com>
Signed-off-by: Juan Quintela <quintela@redhat.com>
In migration codes (especially in migration_thread()), max_size is used
in many place for the threshold value that we will start to do the final
flush and jump to the next stage to dump the whole rest things to
destination. However its name is confusing to first readers. Let's
rename it to "threshold_size" when proper and add a comment for it. No
functional change is made.
CC: Juan Quintela <quintela@redhat.com>
CC: "Dr. David Alan Gilbert" <dgilbert@redhat.com>
Signed-off-by: Peter Xu <peterx@redhat.com>
Reviewed-by: "Dr. David Alan Gilbert" <dgilbert@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Reviewed-by: Juan Quintela <quintela@redhat.com>
Signed-off-by: Juan Quintela <quintela@redhat.com>
We set it right above this one. No need to set it twice.
CC: Juan Quintela <quintela@redhat.com>
CC: Dr. David Alan Gilbert <dgilbert@redhat.com>
Reviewed-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Signed-off-by: Peter Xu <peterx@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Reviewed-by: Juan Quintela <quintela@redhat.com>
Signed-off-by: Juan Quintela <quintela@redhat.com>
If we modify the virtio-rng virqueue while the
vmstate is already migrated we can have some
inconsistencies between the virtqueue state and
the memory content.
To avoid this, stop the virtqueue while the CPU
is stopped.
Signed-off-by: Laurent Vivier <lvivier@redhat.com>
Reviewed-by: Amit Shah <amit@kernel.org>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Reviewed-by: Juan Quintela <quintela@redhat.com>
Signed-off-by: Juan Quintela <quintela@redhat.com>
If we close the QEMUFile descriptor in process_incoming_migration_co()
while it has been stopped by an error, the postcopy_ram_listen_thread()
can try to continue to use it. And as the memory has been freed
it is working with an invalid pointer and crashes.
Fix this by releasing the memory after having managed the error
case (which, in fact, calls exit())
Signed-off-by: Laurent Vivier <lvivier@redhat.com>
Reviewed-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Reviewed-by: Juan Quintela <quintela@redhat.com>
Reviewed-by: Amit Shah <amit@kernel.org>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Signed-off-by: Juan Quintela <quintela@redhat.com>
We have disabled memory hotplug, so we don't need to handle
migration_bitamp there.
Signed-off-by: Juan Quintela <quintela@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Reviewed-by: zhanghailiang <zhang.zhanghailiang@huawei.com>
Until we have reviewed what can/can't be hotplugged during migration,
disable it. We can enable it later for the things that we know that
work. For instance, memory hotplug during postcopy doesn't work
currently.
Signed-off-by: Juan Quintela <quintela@redhat.com>
Reviewed-by: zhanghailiang <zhang.zhanghailiang@huawei.com>
--
- Fix typo. Thanks Thomas.
- Delay migration check after we have checked that we can hotplug that
device.
- more typos
It is not used by linux-user, otherwise I need to to create one stub
for migration_is_idle() on following patch.
Signed-off-by: Juan Quintela <quintela@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Reviewed-by: zhanghailiang <zhang.zhanghailiang@huawei.com>
Reviewed-by: Markus Armbruster <armbru@redhat.com>
I need to move qdev_unplug to qdev-monitor in the following patch, and
it needs access to this variable.
Signed-off-by: Juan Quintela <quintela@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Reviewed-by: zhanghailiang <zhang.zhanghailiang@huawei.com>
Signed-off-by: Juan Quintela <quintela@redhat.com>
Reviewed-by: zhanghailiang <zhang.zhanghailiang@huawei.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Only user don't have a MigrationState handly.
Signed-off-by: Juan Quintela <quintela@redhat.com>
Reviewed-by: Dr. David Alan Gilbert <dgilbert@redhat.com>