Coverity warns that multiplying two 32-bit values gives a 32-bit result which
is assigned to a 64-bit variable. Add an explicit ram_addr_t cast to silence
the warning.
Signed-off-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Commit ee72bed0 "tcx: remove primitives for non-32-bit surfaces" accidentally
left a trailing break in update_palette_entries() causing the palette update
routine to exit after just one iteration. Remove it.
Signed-off-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
This is to allow clients to initialise these without failing as long
as no 2D engine function is called that would use the written value.
Saved values are not used yet (may get used when more of 2D engine is
added sometimes) and clients normally only write to most of these
registers, nothing is known to ever read them but they are documented
as read/write so also implement read for these.
Signed-off-by: BALATON Zoltan <balaton@eik.bme.hu>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Tested-by: Aurelien Jarno <aurelien@aurel32.net>
Message-id: 80adf8e4d084ec6cc30d149f8e8215debb67314a.1492787889.git.balaton@eik.bme.hu
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
- Rename a variable
- Move variable declarations out of loop to the beginning in draw_hwc_line
Signed-off-by: BALATON Zoltan <balaton@eik.bme.hu>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Tested-by: Aurelien Jarno <aurelien@aurel32.net>
Message-id: 187c9e4e09d9bc2967b2454b36bb088ceef0b8bc.1492787889.git.balaton@eik.bme.hu
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Rework HWC handling to simplify it and fix cursor not updating on
screen as needed. Previously cursor was not updated because checking
for changes in a line overrode the update flag set for the cursor but
fixing this is not enough because the cursor should also be updated if
its shape or location changes. Introduce hwc_invalidate() function to
handle that similar to other display controller models.
Signed-off-by: BALATON Zoltan <balaton@eik.bme.hu>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Tested-by: Aurelien Jarno <aurelien@aurel32.net>
Message-id: 6970a5e9868b7246656c1d02038dc5d5fa369507.1492787889.git.balaton@eik.bme.hu
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
We only emulate the sysbus device in its default LE mode and PCI is LE
as well so specify this for registers and framebuffer memory.
Note that though the Linux kernel driver has code which claims to
handle both big and little endian, it is obviously bogus for 16 bit
and cannot be trusted as a source of information on the framebuffer
pixel format. This is our best guess about device behaviour based on
the specs and testing with MorphOS that is known to work on real HW.
Signed-off-by: BALATON Zoltan <balaton@eik.bme.hu>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Tested-by: Aurelien Jarno <aurelien@aurel32.net>
Message-id: 8b9605a569f8bf54074e15903620b18cd9967c89.1492787889.git.balaton@eik.bme.hu
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Only the display controller part is created automatically on PCI
Signed-off-by: BALATON Zoltan <balaton@eik.bme.hu>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Tested-by: Aurelien Jarno <aurelien@aurel32.net>
Message-id: 647d292c6f5abba8b2a614687229949b5dcb864e.1492787889.git.balaton@eik.bme.hu
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Do not use the base address to access data in local memory. This is in
preparation to allow chip connected via PCI where base address depends
on where the BAR is mapped so it will be unknown.
Signed-off-by: BALATON Zoltan <balaton@eik.bme.hu>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Tested-by: Aurelien Jarno <aurelien@aurel32.net>
Message-id: 79dab21bc6ec4d563aabf265c3bab40e2e95aae8.1492787889.git.balaton@eik.bme.hu
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Adding vmstate saving is not in this patch because the state structure
will be changed in further patches, then another patch will add
vmstate descriptor after those changes.
Signed-off-by: BALATON Zoltan <balaton@eik.bme.hu>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Tested-by: Aurelien Jarno <aurelien@aurel32.net>
Message-id: a32b7fc981a20205f96d530d8e958f12ace1104c.1492787889.git.balaton@eik.bme.hu
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Add properties for the default display resolution, pass
on that information to the guest so the driver can use it.
Also move up qxl_crc32() function so we don't need a
forward declaration.
Additionally guest driver updates are needed so the
guest driver will actually pick this up, which will
probably land in linux kernel 4.12.
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Message-id: 20170421092234.8368-1-kraxel@redhat.com
Fix standard vga mode check: Both s->config and s->enabled must be set
to enable vmware command fifo processing.
Drop dirty tracking code from the fifo rendering code path, it isn't
used anyway because vmsvga turns off dirty tracking when leaving
standard vga mode.
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Message-id: 20170421091632.30900-9-kraxel@redhat.com
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
The vga code clears the dirty bits *after* reading the framebuffer
memory. So if the guest framebuffer updates hits the race window
between vga reading the framebuffer and vga clearing the dirty bits
vga will miss that update
Fix it by using the new memory_region_copy_and_clear_dirty()
memory_region_copy_get_dirty() functions. That way we clear the
dirty bitmap before reading the framebuffer. Any guest display
updates happening in parallel will be properly tracked in the
dirty bitmap then and the next display refresh will pick them up.
Problem triggers with mttcg only. Before mttcg was merged tcg
never ran in parallel to vga emulation. Using kvm will hide the
problem too, due to qemu operating on a userspace copy of the
kernel's dirty bitmap.
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Message-id: 20170421091632.30900-5-kraxel@redhat.com
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Add vga_scanline_invalidated helper to check whenever a scanline was
invalidated. Add a sanity check to fix OOB read access for display
heights larger than 2048.
Only cirrus uses this, for hardware cursor rendering, so having this
work properly for the first 2048 scanlines only shouldn't be a problem
as the cirrus can't handle large resolutions anyway. Also changing the
invalidated_y_table size would break live migration.
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Message-id: 20170421091632.30900-4-kraxel@redhat.com
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
This avoids a "#ifdef HOST_WORDS_BIGENDIAN" and this is the purpose
of PIXMAN_BE_* macros.
Signed-off-by: Laurent Vivier <lvivier@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Reviewed-by: Sahid Orentino Ferdjaoui <sahid.ferdjaoui@redhat.com>
Message-id: 20170403114044.15762-1-lvivier@redhat.com
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Previous to the existence of load_image_mr(), the only way to load in the
FCode ROM image was to pass in its physical address via qdev properties
and use load_image_targphys().
Signed-off-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
Reviewed-by: Gerd Hoffmann <kraxel@redhat.com>
Rather than calling memory_region_set_dirty() directly, make sure that we call
tcx_set_dirty() instead. This ensures that the 24-bit plane and cplane are
also invalidated correctly.
Signed-off-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
Reviewed-by: Gerd Hoffmann <kraxel@redhat.com>
As all surfaces in QEMU are now either shared or 32-bit ARGB regardless of
the guest depth, remove all non-32-bit primitives from tcx_update_display()
and consequence their implementation which are no longer required.
Signed-off-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
Reviewed-by: Gerd Hoffmann <kraxel@redhat.com>
Now that page alignment is handled by the memory API, there is no need to
duplicate the code 4 times (4 * 1024 == 4096 == TARGET_PAGE_SIZE).
Finally we have now removed all traces of TARGET_PAGE_SIZE.
Signed-off-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
Reviewed-by: Gerd Hoffmann <kraxel@redhat.com>
Now that page alignment is handled by the memory API, there is no need to
duplicate the code 4 times (4 * 1024 == 4096 == TARGET_PAGE_SIZE).
Signed-off-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
Reviewed-by: Gerd Hoffmann <kraxel@redhat.com>
Since all of the tcx_*_dirty() functions now calculate the 24-bit and
cplane offsets themselves from the base address, these variables are no
longer needed.
Signed-off-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
Reviewed-by: Gerd Hoffmann <kraxel@redhat.com>
This can now be used by both the 8-bit and 24-bit display code, so rename
to tcx_check_dirty().
Signed-off-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
Reviewed-by: Gerd Hoffmann <kraxel@redhat.com>
This can now be used by both the 8-bit and 24-bit display code, so rename
to tcx_check_dirty().
Signed-off-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
Reviewed-by: Gerd Hoffmann <kraxel@redhat.com>
Previous to the existence of load_image_mr(), the only way to load in the
FCode ROM image was to pass in its physical address via qdev properties
and use load_image_targphys().
Signed-off-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
Reviewed-by: Gerd Hoffmann <kraxel@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
The code was incorrectly calculating the end address rather than the size of
the required region.
Signed-off-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
Reviewed-by: Gerd Hoffmann <kraxel@redhat.com>
This was an artifact from very early versions of the code from before the
memory API and is no longer needed.
Signed-off-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
Reviewed-by: Gerd Hoffmann <kraxel@redhat.com>
Since commit cd958edb1f, same size console resize is skipped. This
change broke QXL incoming migration in VGA mode,
qemu_spice_display_switch() is no longer called during qxl_post_load(),
because default message surface is of the same size, and during
displaychangelistener registration, PCIQXLDevice.mode is
QXL_MODE_UNDEFINED. This triggers a later crash on refresh:
==2634== Invalid read of size 4
==3516== at 0x65F3050: pixman_image_get_data (in /usr/lib64/libpixman-1.so.0.34.0)
==3516== by 0x6F0CEB: qemu_spice_create_update (spice-display.c:215)
==3516== by 0x6F1CC7: qemu_spice_display_refresh (spice-display.c:502)
==3516== by 0x58CF77: display_refresh (qxl.c:1948)
==3516== by 0x6E8084: do_safe_dpy_refresh (console.c:1591)
==3516== by 0x6E80D5: dpy_refresh (console.c:1604)
==3516== by 0x6E4508: gui_update (console.c:201)
==3516== by 0x81898E: timerlist_run_timers (qemu-timer.c:536)
==3516== by 0x8189D6: qemu_clock_run_timers (qemu-timer.c:547)
==3516== by 0x818D98: qemu_clock_run_all_timers (qemu-timer.c:662)
==3516== by 0x81952A: main_loop_wait (main-loop.c:514)
==3516== by 0x4ADD29: main_loop (vl.c:1898)
One way to solve this is to explicitely call qemu_spice_display_switch()
on entering VGA mode, which is called during qxl_post_load().
Fixes:
"null pointer access on migration resume of systemrescuecd boot menu with qxl-vga"
https://bugs.launchpad.net/qemu/+bug/1679126https://bugzilla.redhat.com/show_bug.cgi?id=1438566
Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Message-id: 20170406120513.638-4-marcandre.lureau@redhat.com
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Should be "c" not "col". The macro is used with "col" as third parameter
everywhere, so this tyops doesn't break something.
Fixes: 026aeffcb4
Reported-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Reviewed-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Message-id: 1490168303-24588-1-git-send-email-kraxel@redhat.com
... and drop OPENGL_CFLAGS from Makefiles.
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Message-id: 1490079888-29029-1-git-send-email-kraxel@redhat.com
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Change Makefile.objs to use CONFIG_XEN instead of CONFIG_XEN_BACKEND, so
that the Xen backends are only built for targets that support Xen.
Set CONFIG_XEN in the toplevel Makefile to ensure that files that are
built only once pick up Xen support properly.
Signed-off-by: Stefano Stabellini <stefano@aporeto.com>
Tested-by: Greg Kurz <groug@kaod.org>
Reviewed-by: Greg Kurz <groug@kaod.org>
CC: pbonzini@redhat.com
CC: peter.maydell@linaro.org
CC: rth@twiddle.net
CC: stefanha@redhat.com
Message-Id: <1489694518-16978-1-git-send-email-sstabellini@kernel.org>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
The switch from pointers to addresses (commit
026aeffcb4 and
ffaf857778) added
a off-by-one bug to 16bit backward blits. Fix.
Reported-by: 李强 <liqiang6-s@360.cn>
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Reviewed-by: Li Qiang <liqiang6-s@360.cn>
Message-id: 1489735296-19047-1-git-send-email-kraxel@redhat.com
Does basically the same as "cirrus: stop passing around dst pointers in
the blitter", just for the src pointer instead of the dst pointer.
For the src we have to care about cputovideo blits though and fetch the
data from s->cirrus_bltbuf instead of vga memory. The cirrus_src*()
helper functions handle that.
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Message-id: 1489584487-3489-1-git-send-email-kraxel@redhat.com
Instead pass around the address (aka offset into vga memory). Calculate
the pointer in the rop_* functions, after applying the mask to the
address, to make sure the address stays within the valid range.
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Message-id: 1489574872-8679-1-git-send-email-kraxel@redhat.com
off_cur_end is exclusive, so off_cur_end == cirrus_addr_mask is valid.
Fix calculation to make sure to allow that, otherwise the assert added
by commit f153b563f8 can trigger for valid
blits.
Test case: boot windows nt 4.0
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Message-id: 1489579606-26020-1-git-send-email-kraxel@redhat.com
Ok, we have this beast in the cirrus code which is not used at all by
modern guests, except when you try to find security holes in qemu. So,
add an option to disable blitter altogether. Guests released within
the last ten years should not show any rendering issues if you turn off
blitter support.
There are no known bugs in the cirrus blitter code. But in the past we
hoped a few times already that we've finally nailed the last issue. So
having some easy way to mitigate in case yet another blitter issue shows
up certainly makes me sleep a bit better at night.
For completeness: The by far better way to mitigate is to switch away
from cirrus and use stdvga instead. Or something more modern like
virtio-vga in case your guest has support for it.
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Message-id: 1489494540-15745-1-git-send-email-kraxel@redhat.com
Quoting cirrus source code:
Follow real hardware, cirrus card emulated has 4 MB video memory.
Also accept 8 MB/16 MB for backward compatibility.
So just use 4MB by default. We decided to leave that at 8MB by default
a while ago, for live migration compatibility reasons. But we have
compat properties to handle that, so that isn't a compeling reason.
This also removes some sanity check inconsistencies in the cirrus code.
Some places check against the allocated video memory, some places check
against the 4MB physical hardware has. Guest code can trigger asserts
because of that.
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Message-id: 1489494514-15606-1-git-send-email-kraxel@redhat.com