The last case where qobject_from_json() & friends return null without
setting an error is empty or blank input. Callers:
* block.c's parse_json_protocol() reports "Could not parse the JSON
options". It's marked as a work-around, because it also covered
actual bugs, but they got fixed in the previous few commits.
* qobject_input_visitor_new_str() reports "JSON parse error". Also
marked as work-around. The recent fixes have made this unreachable,
because it currently gets called only for input starting with '{'.
* check-qjson.c's empty_input() and blank_input() demonstrate the
behavior.
* The other callers are not affected since they only pass input with
exactly one JSON value or, in the case of negative tests, one error.
Fail with "Expecting a JSON value" instead of returning null, and
simplify callers.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Message-Id: <20180823164025.12553-48-armbru@redhat.com>
The classical way to structure parser and lexer is to have the client
call the parser to get an abstract syntax tree, the parser call the
lexer to get the next token, and the lexer call some function to get
input characters.
Another way to structure them would be to have the client feed
characters to the lexer, the lexer feed tokens to the parser, and the
parser feed abstract syntax trees to some callback provided by the
client. This way is more easily integrated into an event loop that
dispatches input characters as they arrive.
Our JSON parser is kind of between the two. The lexer feeds tokens to
a "streamer" instead of a real parser. The streamer accumulates
tokens until it got the sequence of tokens that comprise a single JSON
value (it counts curly braces and square brackets to decide). It
feeds those token sequences to a callback provided by the client. The
callback passes each token sequence to the parser, and gets back an
abstract syntax tree.
I figure it was done that way to make a straightforward recursive
descent parser possible. "Get next token" becomes "pop the first
token off the token sequence". Drawback: we need to store a complete
token sequence. Each token eats 13 + input characters + malloc
overhead bytes.
Observations:
1. This is not the only way to use recursive descent. If we replaced
"get next token" by a coroutine yield, we could do without a
streamer.
2. The lexer reports errors by passing a JSON_ERROR token to the
streamer. This communicates the offending input characters and
their location, but no more.
3. The streamer reports errors by passing a null token sequence to the
callback. The (already poor) lexical error information is thrown
away.
4. Having the callback receive a token sequence duplicates the code to
convert token sequence to abstract syntax tree in every callback.
5. Known bug: the streamer silently drops incomplete token sequences.
This commit rectifies 4. by lifting the call of the parser from the
callbacks into the streamer. Later commits will address 3. and 5.
The lifting removes a bug from qjson.c's parse_json(): it passed a
pointer to a non-null Error * in certain cases, as demonstrated by
check-qjson.c.
json_parser_parse() is now unused. It's a stupid wrapper around
json_parser_parse_err(). Drop it, and rename json_parser_parse_err()
to json_parser_parse().
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Message-Id: <20180823164025.12553-35-armbru@redhat.com>
Most of the various error classes were removed prior to the 1.2 release.
Remove mentions of the error classes which did not make it.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
blockdev-add fails if an invalid node name is given, so we should
document what a valid node name even is.
Reported-by: Cong Li <coli@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Cong Li <coli@redhat.com>
Reviewed-by: Alberto Garcia <berto@igalia.com>
Like for query-block, the client needs to identify which BlockBackend
the returned data is for. Anonymous BlockBackends are identified by the
device model they are attached to. Add a 'qdev' field that contains the
qdev ID or QOM path of the attached device model.
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Making 'allow-oob' optional in SchemaInfoCommand permits omitting it
in the common case. Shrinks query-qmp-schema's output from 122.1KiB
to 118.6KiB for me.
Note that out-of-band execution is still experimental (you have to
configure the monitor with x-oob=on to use it).
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Message-Id: <20180718090557.17248-1-armbru@redhat.com>
Reviewed-by: Peter Xu <peterx@redhat.com>
Committing to the current --preconfig / exit-preconfig interface
before it has seen any use is premature. Mark both as experimental,
the former in documentation, the latter by renaming it to
x-exit-preconfig.
See the previous commit for more detailed rationale.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Message-Id: <20180705091402.26244-3-armbru@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Acked-by: Eduardo Habkost <ehabkost@redhat.com>
Acked-by: Igor Mammedov <imammedo@redhat.com>
[Straightforward conflict with commit 514337c142 resolved]
According to commit 047f7038f5, option --preconfig
[...] allows pausing QEMU in the new RUN_STATE_PRECONFIG state,
allowing the configuration of QEMU from QMP before the machine
jumps into board initialization code of machine_run_board_init()
The intent is to allow management to query machine state and
additionally configure it using previous query results within one
QEMU instance (i.e. eliminate the need to start QEMU twice, 1st to
query board specific parameters and 2nd for actual VM start using
query results for additional parameters).
The implementation is a bit of a hack: it splices in an additional
main loop before machine creation, in special runstate preconfig. New
command exit-preconfig exits that main loop. QEMU continues
initializing, creates the machine, and runs the good old main loop.
The replacement of the main loop is transparent to monitors.
Sadly, some commands expect initialization to be complete. Running
them in --preconfig's main loop violates their preconditions. Since
we don't really know which commands are safe, we use a whitelist.
This drags the concept of run state into the QMP core.
The whitelist is done as a command flag in the QAPI schema (commit
d6fe3d02e9). Drags the concept of run state further into the QAPI
language.
The command flag is exposed in query-qmp-schema (also commit
d6fe3d02e9). This makes it ABI.
I consider the whole thing an offensively ugly hack, but sometimes an
ugly hack is the best we can do to solve a problem people have.
The need described by the commit message quote above is genuine. The
proper solution would be a main loop that permits complete
configuration via QMP. This is out of reach, thus the hack.
However, even though the need is genuine, it isn't urgent: libvirt is
not going to use this anytime soon. Baking a hack into ABI before it
has any users is a bad idea.
This commit reverts the parts of commit d6fe3d02e9 that affect ABI
via query-qmp-schema. The commit did the following:
(1) Add command flag 'allow-preconfig' to the QAPI schema language
(2) Pass it to code generators
(3) Have the commands.py code generator pass it to the command
registry (so commit 047f7038f5 can use it as whitelist)
(4) Add 'allow-preconfig' to SchemaInfoCommand (neglecting to update
qapi-code-gen.txt section "Client JSON Protocol introspection")
(5) Set 'allow-preconfig': true for commands qmp_capabilities,
query-commands, query-command-line-options, query-status
Revert exactly (4), plus a bit of documentation added to
qemu-tech.info in commit 047f7038f5.
Shrinks query-qmp-schema's output from 126.5KiB to 121.8KiB for me.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Message-Id: <20180705091402.26244-2-armbru@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Acked-by: Eduardo Habkost <ehabkost@redhat.com>
Acked-by: Igor Mammedov <imammedo@redhat.com>
[Straightforward conflict with commit d626b6c1ae resolved]
This was accidentally omitted. Thanks to Eric Blake for spotting this.
Signed-off-by: Ari Sundholm <ari@tuxera.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
- qcow2: Use worker threads for compression to improve performance of
'qemu-img convert -W' and compressed backup jobs
- blklogwrites: New filter driver to log write requests to an image in
the dm-log-writes format
- file-posix: Fix image locking during image creation
- crypto: Fix memory leak in error path
- Error out instead of silently truncating node names
-----BEGIN PGP SIGNATURE-----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=z5AC
-----END PGP SIGNATURE-----
Merge remote-tracking branch 'remotes/kevin/tags/for-upstream' into staging
Block layer patches:
- qcow2: Use worker threads for compression to improve performance of
'qemu-img convert -W' and compressed backup jobs
- blklogwrites: New filter driver to log write requests to an image in
the dm-log-writes format
- file-posix: Fix image locking during image creation
- crypto: Fix memory leak in error path
- Error out instead of silently truncating node names
# gpg: Signature made Thu 05 Jul 2018 11:24:33 BST
# gpg: using RSA key 7F09B272C88F2FD6
# gpg: Good signature from "Kevin Wolf <kwolf@redhat.com>"
# Primary key fingerprint: DC3D EB15 9A9A F95D 3D74 56FE 7F09 B272 C88F 2FD6
* remotes/kevin/tags/for-upstream:
file-posix: Unlock FD after creation
file-posix: Fix creation locking
block/blklogwrites: Add an option for the update interval of the log superblock
block/blklogwrites: Add an option for appending to an old log
block/blklogwrites: Change log_sector_size from int64_t to uint64_t
block/crypto: Fix memory leak in create error path
block: Don't silently truncate node names
block: Add blklogwrites
block: Move two block permission constants to the relevant enum
qcow2: add compress threads
qcow2: refactor data compression
qemu-img: allow compressed not-in-order writes
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
This is a way to ensure that the log superblock is periodically
updated. Before, this was only done on flush requests, which may
not be enough if the VM exits abnormally, omitting the final flush.
The default interval is 4096 write requests.
Signed-off-by: Ari Sundholm <ari@tuxera.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Suggested by Kevin Wolf. May be useful when testing multiple batches
of writes or doing long-term testing involving restarts of the VM.
Signed-off-by: Ari Sundholm <ari@tuxera.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Implements a block device write logging system, similar to Linux kernel
device mapper dm-log-writes. The write operations that are performed
on a block device are logged to a file or another block device. The
write log format is identical to the dm-log-writes format. Currently,
log markers are not supported.
This functionality can be used for crash consistency and fs consistency
testing. By implementing it in qemu, tests utilizing write logs can be
be used to test non-Linux drivers and older kernels.
The driver accepts an optional parameter to set the sector size used
for logging. This makes the driver require all requests to be aligned
to this sector size and also makes offsets and sizes of writes in the
log metadata to be expressed in terms of this value (the log format has
a granularity of one sector for offsets and sizes). This allows
accurate logging of writes to guest block devices that have unusual
sector sizes.
The implementation is based on the blkverify and blkdebug block
drivers.
Signed-off-by: Aapo Vienamo <aapo@tuxera.com>
Signed-off-by: Ari Sundholm <ari@tuxera.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
There's just one use of qobject_from_jsonf() to parse a JSON object
left: timestamp_put(). Switch it to qdict_from_jsonf_nofail().
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Message-Id: <20180703085358.13941-29-armbru@redhat.com>
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Message-Id: <20180703085358.13941-28-armbru@redhat.com>
By using the more specific type, we get fewer downcasts. The
downcasts are safe, but not obviously so, at least not locally.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Message-Id: <20180703085358.13941-24-armbru@redhat.com>
All callers of qmp_build_error_object() duplicate the code to wrap it
in a response object. Replace it by qmp_error_response() that
captures the duplicated code, including error_free().
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Message-Id: <20180703085358.13941-23-armbru@redhat.com>
handle_qmp_command() reports certain errors right away. This is wrong
when OOB is enabled, because the errors can "jump the queue" then, as
the previous commit demonstrates.
To fix, we need to delay errors until dispatch. Do that for semantic
errors, mostly by reverting ill-advised parts of commit cf869d5317
"qmp: support out-of-band (oob) execution". Bonus: doesn't run
qmp_dispatch_check_obj() twice, once in handle_qmp_command(), and
again in do_qmp_dispatch(). That's also due to commit cf869d5317.
The next commit will fix queue jumping for syntax errors.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Message-Id: <20180703085358.13941-18-armbru@redhat.com>
Commit cf869d5317 "qmp: support out-of-band (oob) execution" added a
general mechanism for command-independent arguments just for an
out-of-band flag:
The "control" key is introduced to store this extra flag. "control"
field is used to store arguments that are shared by all the commands,
rather than command specific arguments. Let "run-oob" be the first.
However, it failed to reject unknown members of "control". For
instance, in QMP command
{"execute": "query-name", "id": 42, "control": {"crap": true}}
"crap" gets silently ignored.
Instead of fixing this, revert the general "control" mechanism
(because YAGNI), and do it the way I initially proposed, with key
"exec-oob". Simpler code, simpler interface.
An out-of-band command
{"execute": "migrate-pause", "id": 42, "control": {"run-oob": true}}
becomes
{"exec-oob": "migrate-pause", "id": 42}
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Message-Id: <20180703085358.13941-13-armbru@redhat.com>
[Commit message typo fixed]
Commit cf869d5317 "qmp: support out-of-band (oob) execution"
accidentally made qemu-ga accept and ignore "control". Fix that.
Out-of-band execution in a monitor that doesn't support it now fails
with
{"error": {"class": "GenericError", "desc": "QMP input member 'control' is unexpected"}}
instead of
{"error": {"class": "GenericError", "desc": "Please enable out-of-band first for the session during capabilities negotiation"}}
The old description is suboptimal when out-of-band cannot not be
enabled, or the command doesn't support out-of-band execution.
The new description is a bit unspecific, but it'll do.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Message-Id: <20180703085358.13941-12-armbru@redhat.com>
Commit cf869d5317 "qmp: support out-of-band (oob) execution" changed
how we check "id":
Note that in the patch I exported qmp_dispatch_check_obj() to be
used to check the request earlier, and at the same time allowed
"id" field to be there since actually we always allow that.
The part after "and" is ill-advised: it makes qemu-ga accept and
ignore "id". Revert.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Message-Id: <20180703085358.13941-10-armbru@redhat.com>
tests/qmp-test tests an out-of-band command overtaking a slow in-band
command. To do that, it needs:
1. An in-band command that *reliably* takes long enough to be
overtaken.
2. An out-of-band command to do the overtaking.
3. To avoid delays, a way to make the in-band command complete quickly
after it was overtaken.
To satisfy these needs, commit 469638f9cb provides the rather
peculiar oob-capable QMP command x-oob-test:
* With "lock": true, it waits for a global semaphore.
* With "lock": false, it signals the global semaphore.
To satisfy 1., the test runs x-oob-test in-band with "lock": true.
To satisfy 2. and 3., it runs x-oob-test out-of-band with "lock": false.
Note that waiting for a semaphore violates the rules for oob-capable
commands. Running x-oob-test with "lock": true hangs the monitor
until you run x-oob-test with "lock": false on another monitor (which
you might not have set up).
Having an externally visible QMP command that may hang the monitor is
not nice. Let's apply a little more ingenuity to the problem. Idea:
have an existing command block on reading a FIFO special file, unblock
it by opening the FIFO for writing.
For 1., use
{"execute": "blockdev-add", "id": ID1,
"arguments": {
"driver": "blkdebug", "node-name": ID1, "config": FIFO,
"image": { "driver": "null-co"}}}
where ID1 is an arbitrary string, and FIFO is the name of the FIFO.
For 2., use
{"execute": "migrate-pause", "id": ID2, "control": {"run-oob": true}}
where ID2 is a different arbitrary string. Since there's no migration
to pause, the command will fail, but that's fine; instant failure is
still a test of out-of-band responses overtaking in-band commands.
For 3., open FIFO for writing.
Drop QMP command x-oob-test.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Message-Id: <20180703085358.13941-6-armbru@redhat.com>
[Error checking tweaked]
Events are broadcast to all monitors. If another monitor's client has
a command with the same ID in flight, the event will incorrectly claim
that command was dropped. This must be fixed before out-of-band
execution can graduate from "experimental".
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Message-Id: <20180703085358.13941-5-armbru@redhat.com>
Add #if defined(CONFIG_SPICE) in generated code, and adjust the
qmp/hmp code accordingly.
query-qmp-schema no longer reports the command/events etc as
available when disabled at compile time.
Commands made conditional:
* query-spice
Before the patch, the command for !CONFIG_SPICE is unregistered. It
will fail with the same error.
Events made conditional:
* SPICE_CONNECTED, SPICE_INITIALIZED, SPICE_DISCONNECTED,
SPICE_MIGRATE_COMPLETED
Add TODO for conditional SPICE chardevs, delayed until the supports
for conditional members lands.
No HMP change, the code was already conditional.
Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Reviewed-by: Gerd Hoffmann <kraxel@redhat.com>
Reviewed-by: Markus Armbruster <armbru@redhat.com>
Message-Id: <20180703155648.11933-15-marcandre.lureau@redhat.com>
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Add #if defined(CONFIG_VNC) in generated code, and adjust the
qmp/hmp code accordingly.
query-qmp-schema no longer reports the command/events etc as
available when disabled at compile.
Commands made conditional:
* query-vnc, query-vnc-servers, change-vnc-password
Before the patch, the commands for !CONFIG_VNC are stubs that fail
like this:
{"error": {"class": "GenericError",
"desc": "The feature 'vnc' is not enabled"}}
Afterwards, they fail like this:
{"error": {"class": "CommandNotFound",
"desc": "The command FOO has not been found"}}
I call that an improvement, because it lets clients distinguish
between command unavailable (class CommandNotFound) and command failed
(class GenericError).
Events made conditional:
* VNC_CONNECTED, VNC_INITIALIZED, VNC_DISCONNECTED
HMP change:
* info vnc
Will return "unknown command: 'info vnc'" when VNC is compiled
out (same as error for spice when --disable-spice)
Occurrences of VNC (case insensitive) in the schema that aren't
covered by this change:
* add_client
Command has other uses, including "socket bases character devices".
These are unconditional as far as I can tell.
* set_password, expire_password
In theory, these commands could be used for managing any service's
password. In practice, they're used for VNC and SPICE services.
They're documented for "remote display session" / "remote display
server".
The service is selected by argument @protocol. The code special-cases
protocol-specific argument checking, then calls a protocol-specific
function to do the work. If it fails, the command fails with "Could
not set password". It does when the service isn't compiled in (it's a
stub then).
We could make these commands conditional on the conjunction of all
services [currently: defined(CONFIG_VNC) || defined(CONFIG_SPICE)],
but I doubt it's worthwhile.
* change
Command has other uses, namely changing media.
This patch inlines a stub; no functional change.
Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Reviewed-by: Gerd Hoffmann <kraxel@redhat.com>
Reviewed-by: Markus Armbruster <armbru@redhat.com>
Message-Id: <20180703155648.11933-14-marcandre.lureau@redhat.com>
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Affects documentation and a few error messages.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Message-Id: <20180703085358.13941-2-armbru@redhat.com>
In order to test that the NBD server is properly advertising
dirty bitmaps, we need a bare minimum client that can request
and read the context. Since feature freeze for 3.0 is imminent,
this is the smallest workable patch, which replaces the qemu
block status report with the results of the NBD server's dirty
bitmap (making it very easy to use 'qemu-img map --output=json'
to learn where the dirty portions are). Note that the NBD
protocol defines a dirty section with the same bit but opposite
sense that normal "base:allocation" uses to report an allocated
section; so in qemu-img map output, "data":true corresponds to
clean, "data":false corresponds to dirty.
A more complete solution that allows dirty bitmaps to be queried
at the same time as normal block status will be required before
this addition can lose the x- prefix. Until then, the fact that
this replaces normal status with dirty status means actions
like 'qemu-img convert' will likely misbehave due to treating
dirty regions of the file as if they are unallocated.
The next patch adds an iotest to exercise this new code.
Signed-off-by: Eric Blake <eblake@redhat.com>
Message-Id: <20180702191458.28741-2-eblake@redhat.com>
Commit 51f63ec7d tried to change all references to 2.13 into 3.0, but
it failed to achieve this because it was not properly rebased on top of
the series introducing qapi/job.json. Change the references now.
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Reviewed-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
This patch adds Windows crashdumping feature. Now QEMU can produce ELF-dump
containing Windows crashdump header, which can help to convert to a valid
WinDbg-understandable crashdump file, or immediately create such file.
The crashdump will be obtained by joining physical memory dump and 8K header
exposed through vmcoreinfo/fw_cfg device by guest driver at BSOD time. Option
'-w' was added to dump-guest-memory command. At the moment, only x64
configuration is supported.
Suitable driver can be found at
https://github.com/virtio-win/kvm-guest-drivers-windows/tree/master/fwcfg64
Signed-off-by: Viktor Prutyanov <viktor.prutyanov@virtuozzo.com>
Reviewed-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Message-Id: <20180517162342.4330-2-viktor.prutyanov@virtuozzo.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Let management know if there were any problems communicating with
qemu-pr-helper. The event is edge-triggered, and is sent every time
the connection status of the pr-manager-helper object changes.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
This will include how many bytes they are sent through multifd.
Signed-off-by: Juan Quintela <quintela@redhat.com>
Reviewed-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Only one existing trace event uses a floating point type. Unfortunately
float and double cannot be supported since SystemTap does not have
floating point types.
Remove float and double from the whitelist and document this limitation.
Update the migrate_transferred trace event to use uint64_t instead of
double.
Cc: Dr. David Alan Gilbert <dgilbert@redhat.com>
Cc: Daniel P. Berrangé <berrange@redhat.com>
Cc: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Reviewed-by: Juan Quintela <quintela@redhat.com>
Message-id: 20180621150254.4922-1-stefanha@redhat.com
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Flat unions may now have uncovered branches, so it is possible to get rid
of empty types defined for that purpose only.
Signed-off-by: Anton Nefedov <anton.nefedov@virtuozzo.com>
Reviewed-by: Markus Armbruster <armbru@redhat.com>
Message-Id: <1529311206-76847-3-git-send-email-anton.nefedov@virtuozzo.com>
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Minor fixes and reenable preconfig
-----BEGIN PGP SIGNATURE-----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=Gxyi
-----END PGP SIGNATURE-----
Merge remote-tracking branch 'remotes/dgilbert/tags/pull-hmp-20180621' into staging
HMP pull 2018-06-21
Minor fixes and reenable preconfig
# gpg: Signature made Thu 21 Jun 2018 17:43:09 BST
# gpg: using RSA key 0516331EBC5BFDE7
# gpg: Good signature from "Dr. David Alan Gilbert (RH2) <dgilbert@redhat.com>"
# Primary key fingerprint: 45F5 C71B 4A0C B7FB 977A 9FA9 0516 331E BC5B FDE7
* remotes/dgilbert/tags/pull-hmp-20180621:
hmp: Allow HMP in preconfig state again
hmp: add exit_preconfig
hmp: Add commands for preconfig
qmp: Enable a few commands in preconfig state
hmp: Restrict auto-complete in preconfig
hmp: Allow help on preconfig commands
hmp: Add flag for preconfig commands
hmp-commands: use long for begin and length in dump-guest-memory
monitor: report entirety of hmp command on error
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
For now, the actual command ix x-nbd-server-add-bitmap, reflecting
the fact that we are still working on libvirt code that proves the
command works as needed, and also the fact that we may remove
bitmap-export-name (and just require that the exported name be the
bitmap name).
Signed-off-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
Message-Id: <20180609151758.17343-6-vsementsov@virtuozzo.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
[eblake: make the command experimental by adding x- prefix]
Signed-off-by: Eric Blake <eblake@redhat.com>
Commands query-chardev, query-version, query-name, query-uuid,
query-iothreads, query-memdev are informational and do not depend on
the machine being initialized. Make them available in preconfig
runstate to make the latter a little bit more useful.
The generic qom commands don't depend on the machine being initialized
either; so enabled qom-list, qom-get, qom-set, qom-list-types,
qom-list-properties.
Signed-off-by: Igor Mammedov <imammedo@redhat.com>
Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Message-Id: <20180620153947.30834-5-dgilbert@redhat.com>
Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
This patch allows the user to specify whether to use active or only
background mode for mirror block jobs. Currently, this setting will
remain constant for the duration of the entire block job.
Signed-off-by: Max Reitz <mreitz@redhat.com>
Reviewed-by: Alberto Garcia <berto@igalia.com>
Message-id: 20180613181823.13618-14-mreitz@redhat.com
Signed-off-by: Max Reitz <mreitz@redhat.com>
This patch implements active synchronous mirroring. In active mode, the
passive mechanism will still be in place and is used to copy all
initially dirty clusters off the source disk; but every write request
will write data both to the source and the target disk, so the source
cannot be dirtied faster than data is mirrored to the target. Also,
once the block job has converged (BLOCK_JOB_READY sent), source and
target are guaranteed to stay in sync (unless an error occurs).
Active mode is completely optional and currently disabled at runtime. A
later patch will add a way for users to enable it.
Signed-off-by: Max Reitz <mreitz@redhat.com>
Reviewed-by: Fam Zheng <famz@redhat.com>
Message-id: 20180613181823.13618-13-mreitz@redhat.com
Signed-off-by: Max Reitz <mreitz@redhat.com>
Limit the background transfer bandwidth during the postcopy
phase to the value set on this new parameter. The default, 0,
corresponds to the existing behaviour which is unlimited bandwidth.
Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Message-Id: <20180613102642.23995-2-dgilbert@redhat.com>
Reviewed-by: Peter Xu <peterx@redhat.com>
Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Legacy -drive supports "password-secret" parameter that isn't
available with -blockdev / blockdev-add. That's because we backed out
our first try to provide it there due to interface design doubts, in
commit 577d8c9a81, v2.9.0.
This is the second try. It brings back the parameter, except it's
named "key-secret" now.
Let's review our reasons for backing out the first try, as stated in
the commit message:
* BlockdevOptionsRbd member @password-secret isn't actually a
password, it's a key generated by Ceph.
Addressed by the rename.
* We're not sure where member @password-secret belongs (see the
previous commit).
See previous commit.
* How @password-secret interacts with settings from a configuration
file specified with @conf is undocumented.
Not actually true, the documentation for @conf says "Values in the
configuration file will be overridden by options specified via QAPI",
and we've tested this.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Kevin Wolf <kwolf@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Parameter auth-client-required lets you configure authentication
methods. We tried to provide that in v2.9.0, but backed out due to
interface design doubts (commit 464444fcc1).
This commit is similar to what we backed out, but simpler: we use a
list of enumeration values instead of a list of objects with a member
of enumeration type.
Let's review our reasons for backing out the first try, as stated in
the commit message:
* The implementation uses deprecated rados_conf_set() key
"auth_supported". No biggie.
Fixed: we use "auth-client-required".
* The implementation makes -drive silently ignore invalid parameters
"auth" and "auth-supported.*.X" where X isn't "auth". Fixable (in
fact I'm going to fix similar bugs around parameter server), so
again no biggie.
That fix is commit 2836284db6. This commit doesn't bring the bugs
back.
* BlockdevOptionsRbd member @password-secret applies only to
authentication method cephx. Should it be a variant member of
RbdAuthMethod?
We've had time to ponder, and we decided to stick to the way Ceph
configuration works: the key configured separately, and silently
ignored if the authentication method doesn't use it.
* BlockdevOptionsRbd member @user could apply to both methods cephx
and none, but I'm not sure it's actually used with none. If it
isn't, should it be a variant member of RbdAuthMethod?
Likewise.
* The client offers a *set* of authentication methods, not a list.
Should the methods be optional members of BlockdevOptionsRbd instead
of members of list @auth-supported? The latter begs the question
what multiple entries for the same method mean. Trivial question
now that RbdAuthMethod contains nothing but @type, but less so when
RbdAuthMethod acquires other members, such the ones discussed above.
Again, we decided to stick to the way Ceph configuration works, except
we make auth-client-required a list of enumeration values instead of a
string containing keywords separated by delimiters.
* How BlockdevOptionsRbd member @auth-supported interacts with
settings from a configuration file specified with @conf is
undocumented. I suspect it's untested, too.
Not actually true, the documentation for @conf says "Values in the
configuration file will be overridden by options specified via QAPI",
and we've tested this.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Kevin Wolf <kwolf@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
These point to the job versions now, not the blockjob versions which
don't really exist anymore.
Except set-speed, which does. It sticks out like a sore thumb. This
patch doesn't fix that, but it doesn't make it any worse, either.
Signed-off-by: John Snow <jsnow@redhat.com>
Reviewed-by: Jeff Cody <jcody@redhat.com>
Reviewed-by: Markus Armbruster <armbru@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>