This reverts commit 3ced9f7a36.
The next commit will convert all of qdev_device_add() to QError, and
it'll be clearer with this partial conversion reverted.
Users can't set them, so qdev_device_help() shouldn't list them. Fix
that. Also make qdev_prop_parse() hide them instead of printing a
meaningless "has no parser" error message.
Their value means nothing to users, so qdev_print_props() shouldn't
print it. Fix by removing their print method.
Their only use is dirty hacks. Document that.
Users can't create them, so qdev_device_help() shouldn't list them.
Fix that.
Also make qdev_device_add() pretend they don't exist. Before, it
rejected them with a "can't be added via command line" message, which
wasn't quite right for monitor command device_add.
error_report() terminates the message with a newline. Strip it it
from its arguments.
This fixes a few error messages lacking a newline:
net_handle_fd_param()'s "No file descriptor named %s found", and
tap_open()'s "vnet_hdr=1 requested, but no kernel support for
IFF_VNET_HDR available" (all three versions).
There's one place that passes arguments without newlines
intentionally: load_vmstate(). Fix it up.
qbus_find() adds an informational line to error messages, and prints
both lines with one qemu_error(). Use error_printf() for the
informational line instead.
While there, simplify: instead of printing buffers filled by
qbus_list_bus() and qbus_list_dev() in one go, make them print it.
qdev_device_help() prints device information with qemu_error(). A
later commit will make qemu_error() print additional stuff that is
only appropriate for proper errors, and then this will break. Use
error_printf() instead.
While there, simplify: instead of printing a buffer filled by
qdev_print_devinfo() in one go, make qdev_print_devinfo() print it.
net.c used a constant to signify no MSI vectors were specified. Extend
that to all qdev devices.
Signed-off-by: Amit Shah <amit.shah@redhat.com>
Reported-by: "Michael S. Tsirkin" <mst@redhat.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
If the device can't be created, don't leak the QemuOpts and release the id of
the device that should have been added by the failed device_add.
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
This provides the same information as reverted commit 2ba6edf0. Not
much, just better than nothing.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
Option "-device DRIVER,?" and monitor command "device_add DRIVER,?"
print the supported properties instead of creating a device. The
former also terminates the program.
This is commit 2ba6edf0 (just reverted) done right.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
Help was shoehorned into device creation, qdev_device_add(). Since
help doesn't create a device, it returns NULL, which looks to callers
just like failed device creation. Monitor handler do_device_add()
doesn't care, but main() exits unsuccessfully.
Move help out of device creation, into new qdev_device_help().
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
This commit converts the virtio-console device to create a new
virtio-serial bus that can host console and generic serial ports. The
file hosting this code is now called virtio-serial-bus.c.
The virtio console is now a very simple qdev device that sits on the
virtio-serial-bus and communicates between the bus and qemu's chardevs.
This commit also includes a few changes to the virtio backing code for
pci and s390 to spawn the virtio-serial bus.
As a result of the qdev conversion, we get rid of a lot of legacy code.
The old-style way of instantiating a virtio console using
-virtioconsole ...
is maintained, but the new, preferred way is to use
-device virtio-serial -device virtconsole,chardev=...
With this commit, multiple devices as well as multiple ports with a
single device can be supported.
For multiple ports support, each port gets an IO vq pair. Since the
guest needs to know in advance how many vqs a particular device will
need, we have to set this number as a property of the virtio-serial
device and also as a config option.
In addition, we also spawn a pair of control IO vqs. This is an internal
channel meant for guest-host communication for things like port
open/close, sending port properties over to the guest, etc.
This commit is a part of a series of other commits to get the full
implementation of multiport support. Future commits will add other
support as well as ride on the savevm version that we bump up here.
Signed-off-by: Amit Shah <amit.shah@redhat.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
This patch renames the compat properties into global properties and
makes them more generic. The compatibility stuff is only one of
multiple possible users now.
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
Please, note that we will lose the "Try -device '?' for a list"
hint as it's qdev specific.
Signed-off-by: Luiz Capitulino <lcapitulino@redhat.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
A bus may have hotplugging enabled but not have the 'unplug'
callback defined, which would lead to a crash on trying to
unplug a device on the bus.
Fix by introducing an assert to check if the callback is valid.
Signed-off-by: Amit Shah <amit.shah@redhat.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
This patchs adds infrastructure to handle -usbdevice via qdev callbacks.
USBDeviceInfo gets a name field (for the -usbdevice driver name) and a
callback for -usbdevice parameter parsing.
The new usbdevice_create() function walks the qdev driver list and looks
for a usb driver with a matching name. When a parameter parsing
callback is present it is called, otherwise the device is created via
usb_create_simple().
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
Add a new type for properties common to all nics.
Add helper functions and macros to deal with it.
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
Introduce a 'peer' member to VLANClientState as an alternative
to a vlan. The idea being that packets are transfered directly
from peer clients rather than going through a vlan.
Patchworks-ID: 35516
Signed-off-by: Mark McLoughlin <markmc@redhat.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
Some callers test for != 0, some for < 0. Normalize to < 0.
Patchworks-ID: 35171
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
Like qdev_init(), but terminate program via hw_error() instead of
returning an error value.
Use it instead of qdev_init() where terminating the program on failure
is okay, either because it's during machine construction, or because
we know that failure can't happen.
Because relying in the latter is somewhat unclean, and the former is
not always obvious, it would be nice to go back to qdev_init() in the
not-so-obvious cases, only with proper error handling. I'm leaving
that for another day, because it involves making sure that error
values are properly checked by all callers.
Patchworks-ID: 35168
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
Before, every caller had to do this. Only two actually did.
Patchworks-ID: 35170
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
Move comment back next to main_system_bus to avoid confusion.
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
When initialising a device fails, show the name of the failing device.
The current behaviour is to silently exit on such errors.
Signed-off-by: Amit Shah <amit.shah@redhat.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
Add type safety to qdev reset handlers, by declaring them as
DeviceState * rather than void *.
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
Adds device_add and device_del commands. device_add accepts accepts
the same syntax like the -device command line switch. device_del
expects a device id. So you should tag your devices with ids if you
want to remove them later on, like this:
device_add pci-ohci,id=ohci
device_del ohci
Unplugging via pci_del or usb_del works too.
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
This adds a exit callback for device destruction to DeviceInfo, so
we can hook cleanups into qdev device destruction.
Followup patches will put that into use.
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
Two bug fixes:
* When freeing a device we unregister even stuff we didn't register in
the first place because the ->init() callback failed.
* When freeing a device with child busses attached, we fail to zap the
child bus (and the devices attached to it).
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
Replace:
if (-1 == foo())
with:
if (foo() == -1)
While this coding style is not in direct contravention of our currently
ratified CODING_STYLE treaty, it could be argued that the Article 3 of
the European Convention on Human Rights (prohibiting torture and "inhuman
or degrading treatment") reads on the matter.
[This commit message was brought to you without humour, as is evidenced
by the absence of any emoticons]
Signed-off-by: Mark McLoughlin <markmc@redhat.com>
Cc: Avi Kivity <avi@redhat.com>
Cc: Gerd Hoffmann <kraxel@redhat.com>
Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
Problem: Our file sys-queue.h is a copy of the BSD file, but there are
some additions and it's not entirely compatible. Because of that, there have
been conflicts with system headers on BSD systems. Some hacks have been
introduced in the commits 15cc923584,
f40d753718,
96555a96d7 and
3990d09adf but the fixes were fragile.
Solution: Avoid the conflict entirely by renaming the functions and the
file. Revert the previous hacks.
Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
Sorry folks, but it has to be. One more of these invasive qdev patches.
We have a serious design bug in the qdev interface: device init
callbacks can't signal failure because the init() callback has no
return value. This patch fixes it.
We have already one case in-tree where this is needed:
Try -device virtio-blk-pci (without drive= specified) and watch qemu
segfault. This patch fixes it.
With usb+scsi being converted to qdev we'll get more devices where the
init callback can fail for various reasons.
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
snprintf returns number of bytes needed for the output, not the number
of bytes actually written. Thus the math is wrong ...
Spotted by Markus Armbruster.
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
Message-Id:
Make -device switch use the QemuOpts framework.
Everything should continue to work like it did before.
New: "-set device.$id.$property=$value" works.
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
Message-Id:
Use qemu_tolower() instead of tolower().
Fixes warning on NetBSD.
Signed-off-by: Christoph Egger <Christoph.Egger@amd.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
Message-Id: