The device_name of a BlockDriverState is currently checked because it is
always used as a QemuOpts ID and qemu_opts_create() checks whether such
IDs are wellformed.
node-name is supposed to share the same namespace, but it isn't checked
currently. This patch adds explicit checks both for device_name and
node-name so that the same rules will still apply even if QemuOpts won't
be used any more at some point.
qemu-img used to use names with spaces in them, which isn't allowed any
more. Replace them with underscores.
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Suggested-by: Benoit Canet <benoit.canet@nodalink.com>
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Benoît Canet <benoit.canet@nodalink.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
If the BDS's refcnt > 0, drive_del() destroys the DriveInfo, but not
the BDS. This can happen in three places:
* Device model destruction during unplug: blockdev_auto_del()
* Xen IDE unplug: pci_piix3_xen_ide_unplug()
* drive_del command when no device model is attached: do_drive_del()
The other callers of drive_del are on error paths where refcnt == 1.
If the user somehow manages to plug in a device model using a BDS that
has gone through drive_del(), the legacy configuration passed in
DriveInfo doesn't reach the device model, and automatic deletion on
unplug doesn't work. Worse, some device models such as scsi-disk
crash when DriveInfo doesn't exist.
This is theoretical; I didn't research an actual reproducer. The problem
was introduced when we replaced DriveInfo reference counting by BDS
reference counting in commit a94a3fa..fa510eb.
Fix by keeping DriveInfo alive until its BDS dies.
This affects qemu_drive_opts: now you can't reuse the same ID for new
drive options until the BDS dies. Before, you could, but since the
code always attempts to create a BDS with the same ID next, the
enclosing operation "create a new drive" failed anyway. Different
error path, same result.
Unfortunately, the fix involves use of blockdev.c stuff from block.c,
which is a layering violation. Fortunately, my forthcoming
BlockBackend work will get rid of it again.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Max Reitz <mreitz@redhat.com>
Reviewed-by: Benoît Canet <benoit.canet@nodalink.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Now that all the implementations are converted to asynchronous version
and we can emulate synchronous cancellation with it. Let's drop the
unused member.
Signed-off-by: Fam Zheng <famz@redhat.com>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
This is the async version of bdrv_aio_cancel, which doesn't block the
caller. It guarantees that the cb is called either before returning or
some time later.
bdrv_aio_cancel can base on bdrv_aio_cancel_async, later we can convert
all .io_cancel implementations to .io_cancel_async, and the aio_poll is
the common logic. In the end, .io_cancel can be dropped.
Signed-off-by: Fam Zheng <famz@redhat.com>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
This will be useful in synchronous cancel emulation with
bdrv_aio_cancel_async.
Signed-off-by: Fam Zheng <famz@redhat.com>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
BLOCK_IO_ERROR events are logged by libvirt, which helps with
post mortem analysis of guests. However, one information that
we miss today is a human readable string describing the cause
of the I/O error.
This commit adds that string it to BLOCK_IO_ERROR. Note that
this string is a debugging aid for humans, meaning that it
should not parsed by applications.
Signed-off-by: Luiz Capitulino <lcapitulino@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
This is the next step for decoupling block accounting functions from
BlockDriverState.
In a future commit the BlockAcctStats structure will be moved from
BlockDriverState to the device models structures.
Note that bdrv_get_stats was introduced so device models can retrieve the
BlockAcctStats structure of a BlockDriverState without being aware of it's
layout.
This function should go away when BlockAcctStats will be embedded in the device
models structures.
CC: Kevin Wolf <kwolf@redhat.com>
CC: Stefan Hajnoczi <stefanha@redhat.com>
CC: Keith Busch <keith.busch@intel.com>
CC: Anthony Liguori <aliguori@amazon.com>
CC: "Michael S. Tsirkin" <mst@redhat.com>
CC: Paolo Bonzini <pbonzini@redhat.com>
CC: Eric Blake <eblake@redhat.com>
CC: Peter Maydell <peter.maydell@linaro.org>
CC: Michael Tokarev <mjt@tls.msk.ru>
CC: John Snow <jsnow@redhat.com>
CC: Markus Armbruster <armbru@redhat.com>
CC: Alexander Graf <agraf@suse.de>
CC: Max Reitz <mreitz@redhat.com>
Signed-off-by: Benoît Canet <benoit.canet@nodalink.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
The plan is to add new accounting metrics (latency, invalid requests, failed
requests, queue depth) and block.c is overpopulated so it will be better to work
in a separate module.
Moreover the long term plan is to have statistics in each of the BDS of the graph
for metrology purpose; this means that the device model statistics must move from
the topmost BDS to the device model.
So we need to decouple the statistic code from BlockDriverState.
This is another argument for the extraction of the code in a separate module.
CC: Kevin Wolf <kwolf@redhat.com>
CC: Stefan Hajnoczi <stefanha@redhat.com>
CC: Max Reitz <mreitz@redhat.com>
CC: Eric Blake <eblake@redhat.com>
CC: Benoit Canet <benoit@irqsave.net>
CC: Fam Zheng <famz@redhat.com>
CC: Peter Crosthwaite <peter.crosthwaite@xilinx.com>
CC: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Benoît Canet <benoit.canet@nodalink.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Extract the block accounting statistics into a structure so the block device
models can hold them in the future.
CC: Kevin Wolf <kwolf@redhat.com>
CC: Stefan Hajnoczi <stefanha@redhat.com>
CC: Max Reitz <mreitz@redhat.com>
CC: Eric Blake <eblake@redhat.com>
Signed-off-by: Benoît Canet <benoit.canet@nodalink.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Management software, such as RHEV's vdsm, want to be able to allocate
disk space on demand. The basic use case is to start a VM with a small
disk and then the disk is enlarged when QEMU hits a ENOSPC condition.
To this end, the management software has to be notified when QEMU
encounters ENOSPC. The solution implemented by this commit is simple:
it extends the BLOCK_IO_ERROR with a 'nospace' key, which is true
when QEMU is stopped due to ENOSPC.
Note that support for querying this event is already present in
query-block by means of the 'io-status' key. Also, the new 'nospace'
BLOCK_IO_ERROR field shares the same semantics with 'io-status',
which basically means that werror= has to be set to either
'stop' or 'enospc' to enable 'nospace'.
Finally, this commit also updates the 'io-status' key doc in the
schema with a list of supported device models.
Signed-off-by: Luiz Capitulino <lcapitulino@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Cc: Kevin Wolf <kwolf@redhat.com>
Cc: Stefan Hajnoczi <stefanha@redhat.com>
Signed-off-by: Liu Yuan <namei.unix@gmail.com>
Reviewed-by: Benoît Canet <benoit.canet@nodalink.com>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
When request A is a strict superset of request B:
AAAAAAAA
BBBB
multiwrite_merge() merges them as follows:
AABBBB
The tail of request A should have been included:
AABBBBAA
This patch fixes data loss but this code path is probably rare. Since
guests cannot assume ordering between in-flight requests, few
applications submit overlapping write requests.
Reported-by: Slava Pestov <sviatoslav.pestov@gmail.com>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Benoit Canet <benoit@irqsave.net>
If a long-running operation on a BDS wants to always remain in the same
AIO context, it somehow needs to keep track of the BDS changing its
context. This adds a function for registering callbacks on a BDS which
are called whenever the BDS is attached or detached from an AIO context.
Signed-off-by: Max Reitz <mreitz@redhat.com>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Format names are best consumed in alphabetical order. This makes
human-readable output easy to produce.
bdrv_iterate_format() already has an array of format strings. Sort them
before invoking the iteration callback.
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Reviewed-by: Benoît Canet <benoit.canet@nodalink.com>
Some block devices may not have a filename in their BDS; and for some,
there may not even be a normal filename at all. To work around this, add
a function which tries to construct a valid filename for the
BDS.filename field.
If a filename exists or a block driver is able to reconstruct a valid
filename (which is placed in BDS.exact_filename), this can directly be
used.
If no filename can be constructed, we can still construct an options
QDict which is then converted to a JSON object and prefixed with the
"json:" pseudo protocol prefix. The QDict is placed in
BDS.full_open_options.
For most block drivers, this process can be done automatically; those
that need special handling may define a .bdrv_refresh_filename() method
to fill BDS.exact_filename and BDS.full_open_options themselves.
Signed-off-by: Max Reitz <mreitz@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
g_new(T, n) is neater than g_malloc(sizeof(T) * n). It's also safer,
for two reasons. One, it catches multiplication overflowing size_t.
Two, it returns T * rather than void *, which lets the compiler catch
more type errors.
Patch created with Coccinelle, with two manual changes on top:
* Add const to bdrv_iterate_format() to keep the types straight
* Convert the allocation in bdrv_drop_intermediate(), which Coccinelle
inexplicably misses
Coccinelle semantic patch:
@@
type T;
@@
-g_malloc(sizeof(T))
+g_new(T, 1)
@@
type T;
@@
-g_try_malloc(sizeof(T))
+g_try_new(T, 1)
@@
type T;
@@
-g_malloc0(sizeof(T))
+g_new0(T, 1)
@@
type T;
@@
-g_try_malloc0(sizeof(T))
+g_try_new0(T, 1)
@@
type T;
expression n;
@@
-g_malloc(sizeof(T) * (n))
+g_new(T, n)
@@
type T;
expression n;
@@
-g_try_malloc(sizeof(T) * (n))
+g_try_new(T, n)
@@
type T;
expression n;
@@
-g_malloc0(sizeof(T) * (n))
+g_new0(T, n)
@@
type T;
expression n;
@@
-g_try_malloc0(sizeof(T) * (n))
+g_try_new0(T, n)
@@
type T;
expression p, n;
@@
-g_realloc(p, sizeof(T) * (n))
+g_renew(T, p, n)
@@
type T;
expression p, n;
@@
-g_try_realloc(p, sizeof(T) * (n))
+g_try_renew(T, p, n)
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Max Reitz <mreitz@redhat.com>
Reviewed-by: Jeff Cody <jcody@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
qemu-img check calls bdrv_check() twice if the first run repaired some
inconsistencies. If the first run however again triggered corruption
prevention (on qcow2) due to very bad inconsistencies, bs->drv may be
NULL afterwards. Thus, bdrv_check() should check whether bs->drv is set.
Signed-off-by: Max Reitz <mreitz@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Some code in the block layer makes potentially huge allocations. Failure
is not completely unexpected there, so avoid aborting qemu and handle
out-of-memory situations gracefully.
This patch addresses bounce buffer allocations in block.c. While at it,
convert bdrv_commit() from plain g_malloc() to qemu_try_blockalign().
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
This function returns NULL instead of aborting when an allocation fails.
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Reviewed-by: Benoit Canet <benoit@irqsave.net>
If bdrv_unref() is passed a NULL BDS pointer, it is safe to
exit with no operation. This will allow cleanup code to blindly
call bdrv_unref() on a BDS that has been initialized to NULL.
Reviewed-by: Max Reitz <mreitz@redhat.com>
Signed-off-by: Jeff Cody <jcody@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
When a BlockDriverState is associated with a storage controller
DeviceState we expect guest I/O. Use this opportunity to bump the
coroutine pool size by 64.
This patch ensures that the coroutine pool size scales with the number
of drives attached to the guest. It should increase coroutine pool
usage (which makes qemu_coroutine_create() fast) without hogging too
much memory when fewer drives are attached.
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
bdrv_get_geometry() hides errors. Use bdrv_nb_sectors() or
bdrv_getlength() instead where that's obviously inappropriate.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Max Reitz <mreitz@redhat.com>
Reviewed-by: Benoit Canet <benoit@irqsave.net>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
It returns a multiple of the sector size.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Max Reitz <mreitz@redhat.com>
Reviewed-by: Benoit Canet <benoit@irqsave.net>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Instead of bdrv_getlength().
Aside: a few of these callers don't handle errors. I didn't
investigate whether they should.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Benoit Canet <benoit@irqsave.net>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Instead of bdrv_getlength().
Replace variables length, length2 by total_sectors, nb_sectors2.
Bonus: use total_sectors instead of the slightly unclean
bs->total_sectors.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Benoit Canet <benoit@irqsave.net>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Instead of bdrv_getlength().
Variable target_size is initially in bytes, then changes meaning to
sectors. Ugh. Replace by target_sectors.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Benoit Canet <benoit@irqsave.net>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
A call to retrieve the image size converts between bytes and sectors
several times:
* BlockDriver method bdrv_getlength() returns bytes.
* refresh_total_sectors() converts to sectors, rounding up, and stores
in total_sectors.
* bdrv_getlength() converts total_sectors back to bytes (now rounded
up to a multiple of the sector size).
* Callers wanting sectors rather bytes convert it right back.
Example: bdrv_get_geometry().
bdrv_nb_sectors() provides a way to omit the last two conversions.
It's exactly bdrv_getlength() with the conversion to bytes omitted.
It's functionally like bdrv_get_geometry() without its odd error
handling.
Reimplement bdrv_getlength() and bdrv_get_geometry() on top of
bdrv_nb_sectors().
The next patches will convert some users of bdrv_getlength() to
bdrv_nb_sectors().
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Benoit Canet <benoit@irqsave.net>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
At least raw-posix relies on this because it can allocate bounce buffers
based on the request length, but access it using all of the qiov entries
later.
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Reviewed-by: Max Reitz <mreitz@redhat.com>
If a read request goes across EOF, the block driver sees a shortened
request that stops at EOF (the rest is memsetted in block.c), however
the original qiov was used for this request.
This patch makes the qiov size match the request size, avoiding a
potential buffer overflow in raw-posix.
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Reviewed-by: Max Reitz <mreitz@redhat.com>
bdrv_is_allocated() should return either 0 or 1 in successful cases.
We're lucky that currently, the callers that rely on this (e.g. because
they check for ret == 1) don't seem to break badly. They just might skip
some optimisation or in the case of qemu-io 'map' print separate lines
where a single line would suffice. In theory, a wrong allocation status
could lead to image corruption with certain operations, so let's fix
this quickly.
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
This patch introduces three APIs so that following
patches can support queuing I/O requests and submitting them
as a batch for improving I/O performance.
Reviewed-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Ming Lei <ming.lei@canonical.com>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
On some image chains, QEMU may not always be able to resolve the
filenames properly, when updating the backing file of an image
after a block commit.
For instance, certain relative pathnames may fail, or drives may
have been specified originally by file descriptor (e.g. /dev/fd/???),
or a relative protocol pathname may have been used.
In these instances, QEMU may lack the information to be able to make
the correct choice, but the user or management layer most likely does
have that knowledge.
With this extension to the block-commit api, the user is able to change
the backing file of the overlay image as part of the block-commit
operation.
This allows the change to be 'safe', in the sense that if the attempt
to write the overlay image metadata fails, then the block-commit
operation returns failure, without disrupting the guest.
If the commit top is the active layer, then specifying the backing
file string will be treated as an error (there is no overlay image
to modify in that case).
If a backing file string is not specified in the command, the backing
file string to use is determined in the same manner as it was
previously.
Reviewed-by: Eric Blake <eblake@redhat.com>
Signed-off-by: Jeff Cody <jcody@redhat.com>
Reviewed-by: Kevin Wolf <kwolf@redhat.com>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
This is a small helper function, to determine if 'base' is in the
chain of BlockDriverState 'top'. It returns true if it is in the chain,
and false otherwise.
If either argument is NULL, it will also return false.
Reviewed-by: Benoit Canet <benoit@irqsave.net>
Reviewed-by: Eric Blake <eblake@redhat.com>
Signed-off-by: Jeff Cody <jcody@redhat.com>
Reviewed-by: Kevin Wolf <kwolf@redhat.com>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
This simplifies the function bdrv_find_overlay(). With this change,
bdrv_find_base() is just a subset of usage of bdrv_find_overlay(),
so this also takes advantage of that.
Reviewed-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Benoit Canet <benoit@irqsave.net>
Signed-off-by: Jeff Cody <jcody@redhat.com>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
When failure occurs, 'ret' need be set, or may return 0 to indicate
success. Previously, an error was set in errp, but 0 was returned
anyway. So let bdrv_append_temp_snapshot() return an error code and
use that for the bdrv_open() return value.
Also, error_propagate() need be called only one time within a function.
Signed-off-by: Chen Gang <gang.chen.5i5j@gmail.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
drive-mirror will bdrv_swap the new BDS named node-name with the one
pointed by replaces when the mirroring is finished.
Signed-off-by: Benoit Canet <benoit@irqsave.net>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
If we check for the RESIZE blocker in bdrv_truncate(), that means a
commit will fail if the overlay layer is larger than the base, due to
the backing blocker.
This is a regression in behavior from 2.0; currently, commit will try to
grow the size of the base image to match the overlay size, if the
overlay size is larger.
By moving this into the QMP command qmp_block_resize(), it allows
usage of bdrv_truncate() within block jobs.
Signed-off-by: Jeff Cody <jcody@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
The only semantic change is that bs->open_flags gets BDRV_O_PROTOCOL set
now. This isn't useful, but it doesn't hurt either. The code that was
previously skipped by 'goto done' is automatically disabled because
protocol drivers don't support backing files (and if they did, this
would probably be a fix) and can't have snapshot_flags set.
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Since we parse backing.* options to add a backing file from the command
line when the driver didn't assign one, it has been possible to have a
backing file for e.g. raw images (it just was never accessed).
This is obvious nonsense and should be rejected.
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
This recursion was introduced in commit 505d7583 in order to allow
nesting image formats. It only ever takes effect when the user
explicitly specifies a driver name and that driver isn't suitable for
the protocol level.
We can check this earlier in bdrv_open() and if the explicitly
requested driver is a format driver, clear BDRV_O_PROTOCOL so that
another bs->file layer is opened.
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
It doesn't do much any more, we can move the code to bdrv_open() now.
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Reviewed-by: Benoit Canet <benoit@irqsave.net>
Reviewed-by: Eric Blake <eblake@redhat.com>
This moves the bdrv_open_file() call a bit down so that it can use the
bdrv_open() code that selects the right block driver.
The code between the old and the new call site is either common code
(the error message for an unknown driver has been unified now) or
doesn't run with cleared BDRV_O_PROTOCOL (added an if block in one
place, whereas the right path was already asserted in another place)
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Benoit Canet <benoit@irqsave.net>
The "driver" entry in the options QDict is now only missing if we're
opening an image with format probing.
We also catch cases now where both the drv argument and a "driver"
option is specified, e.g. by specifying -drive format=qcow2,driver=raw
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
The idea of bdrv_fill_options() is to convert every parameter for
opening images, in particular the filename and flags, to entries in the
options QDict.
This patch starts with moving the filename parsing and driver probing
part from bdrv_file_open() to the new function.
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
'buf' is not used actually, so remove it and related snprintf() statement.
Signed-off-by: Chen Gang <gang.chen.5i5j@gmail.com>
Reviewed-by: Kevin Wolf <kwolf@redhat.com>
Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
In order to let event defines use existing types later, instead of
redefine new ones, some old type defines for spice and vnc are changed,
and BlockErrorAction is moved from block.h to qapi schema. Note that
BlockErrorAction is not merged with BlockdevOnError.
At this point, VncInfo is not made a child of VncBasicInfo, because
VncBasicInfo has mandatory fields where VncInfo makes them optional.
Signed-off-by: Wenchao Xia <wenchaoqemu@gmail.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Signed-off-by: Luiz Capitulino <lcapitulino@redhat.com>
With virtio-blk dataplane, I/O errors might occur while QEMU is
not in the main I/O thread. However, it's invalid to call vm_stop
when we're neither in a VCPU thread nor in the main I/O thread,
even if we were to take the iothread mutex around it.
To avoid this problem, we can raise a request to the main I/O thread,
similar to what QEMU does when vm_stop is called from a CPU thread.
We know that bdrv_error_action is called from an AIO callback, and
the moment at which the callback will fire is not well-defined; it
depends on the moment at which the disk or OS finishes the operation,
which can happen at any time. Note that QEMU is certainly not in a CPU
thread and we do not need to call cpu_stop_current() like vm_stop() does.
However, we need to ensure that any action taken by management will
result in correct detection of the error _and_ a running VM. In particular:
- the event must be raised after the iostatus has been set, so that
"info block" will return an iostatus that matches the event.
- the VM must be stopped after the iostatus has been set, so that
"info block" will return an iostatus that matches the runstate.
The ordering between the STOP and BLOCK_IO_ERROR events is preserved;
BLOCK_IO_ERROR is documented to come first.
This makes bdrv_error_action() thread safe (assuming QMP events are,
which is attacked by a separate series).
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Now that all backend drivers are using QemuOpts, remove all
QEMUOptionParameter related codes.
Signed-off-by: Dong Xu Wang <wdongxu@linux.vnet.ibm.com>
Signed-off-by: Chunyan Liu <cyliu@suse.com>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Change block layer to support both QemuOpts and QEMUOptionParameter.
After this patch, it will change backend drivers one by one. At the end,
QEMUOptionParameter will be removed and only QemuOpts is kept.
Signed-off-by: Dong Xu Wang <wdongxu@linux.vnet.ibm.com>
Signed-off-by: Chunyan Liu <cyliu@suse.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Block I/O throttling uses timers and currently always adds them to the
main loop. Throttling will break if bdrv_set_aio_context() is used to
move a BlockDriverState to a different AioContext.
This patch adds throttle_detach/attach_aio_context() interfaces so the
throttling timers and uses them to move timers to the new AioContext.
Note that bdrv_set_aio_context() already drains all requests so we're
sure no throttled requests are pending.
The test cases need to be updated since the throttle_init() interface
has changed.
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Reviewed-by: Benoit Canet <benoit@irqsave.net>
Up until now all BlockDriverState instances have used the QEMU main loop
for fd handlers, timers, and BHs. This is not scalable on SMP guests
and hosts so we need to move to a model with multiple event loops on
different host CPUs.
bdrv_set_aio_context() assigns the AioContext event loop to use for a
particular BlockDriverState. It first detaches the entire
BlockDriverState graph from the current AioContext and then attaches to
the new AioContext.
This function will be used by virtio-blk data-plane to assign a
BlockDriverState to its IOThread AioContext. Make
bdrv_aio_set_context() public since data-plane should not include
block_int.h.
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Modify bdrv_drain_all() to take into account that BlockDriverState
instances may be running in different AioContexts.
This patch changes the implementation of bdrv_drain_all() while
preserving the semantics. Previously kicking throttled requests and
checking for pending requests were done across all BlockDriverState
instances in sequence. Now we process each BlockDriverState in turn,
making sure to acquire and release its AioContext.
This prevents race conditions between the thread executing
bdrv_drain_all() and the thread running the AioContext.
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
bdrv_close_all(), bdrv_commit_all(), bdrv_flush_all(),
bdrv_invalidate_cache_all(), and bdrv_clear_incoming_migration_all() are
called by main loop code and touch all BlockDriverState instances.
Some BlockDriverState instances may be running in another AioContext.
Make sure to acquire the AioContext before closing the BlockDriverState.
This will protect against race conditions once virtio-blk data-plane is
using the BlockDriverState from another AioContext event loop.
Note that this patch does not convert bdrv_drain_all() yet since that
conversion is non-trivial.
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Drop the assumption that we're using the main AioContext. Convert
qemu_aio_wait() to aio_poll() and qemu_bh_new() to aio_bh_new() so the
BlockDriverState AioContext is used.
Note there is still one qemu_aio_wait() left in bdrv_create() but we do
not have a BlockDriverState there and only main loop code invokes this
function.
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Introduced in commit da557a. Spotted by Coverity.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Benoit Canet <benoit@irqsave.net>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
The above bdrv_set_backing_hd already does this.
Signed-off-by: Fam Zheng <famz@redhat.com>
Reviewed-by: Jeff Cody <jcody@redhat.com>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
This makes use of op_blocker and blocks all the operations except for
commit target, on each BlockDriverState->backing_hd.
The asserts for op_blocker in bdrv_swap are removed because with this
change, the target of block commit has at least the backing blocker of
its child, so the assertion is not true. Callers should do their check.
Signed-off-by: Fam Zheng <famz@redhat.com>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
We need to handle the coming backing_blocker properly, so don't open
code the assignment, instead, call bdrv_set_backing_hd to change
backing_hd.
Signed-off-by: Fam Zheng <famz@redhat.com>
Reviewed-by: Jeff Cody <jcody@redhat.com>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
This is the common but non-trivial steps to assign or change the
backing_hd of BDS.
Signed-off-by: Fam Zheng <famz@redhat.com>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Reviewed-by: Jeff Cody <jcody@redhat.com>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
This drops BlockDriverState.in_use with op_blockers:
- Call bdrv_op_block_all in place of bdrv_set_in_use(bs, 1).
- Call bdrv_op_unblock_all in place of bdrv_set_in_use(bs, 0).
- Check bdrv_op_is_blocked() in place of bdrv_in_use(bs).
The specific types are used, e.g. in place of starting block backup,
bdrv_op_is_blocked(bs, BLOCK_OP_TYPE_BACKUP, ...).
There is one exception in block_job_create, where
bdrv_op_blocker_is_empty() is used, because we don't know the operation
type here. This doesn't matter because in a few commits away we will drop
the check and move it to callers that _do_ know the type.
- Check bdrv_op_blocker_is_empty() in place of assert(!bs->in_use).
Note: there is only bdrv_op_block_all and bdrv_op_unblock_all callers at
this moment. So although the checks are specific to op types, this
changes can still be seen as identical logic with previously with
in_use. The difference is error message are improved because of blocker
error info.
Signed-off-by: Fam Zheng <famz@redhat.com>
Reviewed-by: Jeff Cody <jcody@redhat.com>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
BlockDriverState.op_blockers is an array of lists with BLOCK_OP_TYPE_MAX
elements. Each list is a list of blockers of an operation type
(BlockOpType), that marks this BDS as currently blocked for a certain
type of operation with reason errors stored in the list. The rule of
usage is:
* BDS user who wants to take an operation should check if there's any
blocker of the type with bdrv_op_is_blocked().
* BDS user who wants to block certain types of operation, should call
bdrv_op_block (or bdrv_op_block_all to block all types of operations,
which is similar to the existing bdrv_set_in_use()).
* A blocker is only referenced by op_blockers, so the lifecycle is
managed by caller, and shouldn't be lost until unblock, so typically
a caller does these:
- Allocate a blocker with error_setg or similar, call bdrv_op_block()
to block some operations.
- Hold the blocker, do his job.
- Unblock operations that it blocked, with the same reason pointer
passed to bdrv_op_unblock().
- Release the blocker with error_free().
Signed-off-by: Fam Zheng <famz@redhat.com>
Reviewed-by: Benoit Canet <benoit@irqsave.net>
Reviewed-by: Jeff Cody <jcody@redhat.com>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
this patch tries to optimize zero write requests
by automatically using bdrv_write_zeroes if it is
supported by the format.
This significantly speeds up file system initialization and
should speed zero write test used to test backend storage
performance.
I ran the following 2 tests on my internal SSD with a
50G QCOW2 container and on an attached iSCSI storage.
a) mkfs.ext4 -E lazy_itable_init=0,lazy_journal_init=0 /dev/vdX
QCOW2 [off] [on] [unmap]
-----
runtime: 14secs 1.1secs 1.1secs
filesize: 937M 18M 18M
iSCSI [off] [on] [unmap]
----
runtime: 9.3s 0.9s 0.9s
b) dd if=/dev/zero of=/dev/vdX bs=1M oflag=direct
QCOW2 [off] [on] [unmap]
-----
runtime: 246secs 18secs 18secs
filesize: 51G 192K 192K
throughput: 203M/s 2.3G/s 2.3G/s
iSCSI* [off] [on] [unmap]
----
runtime: 8mins 45secs 33secs
throughput: 106M/s 1.2G/s 1.6G/s
allocated: 100% 100% 0%
* The storage was connected via an 1Gbit interface.
It seems to internally handle writing zeroes
via WRITESAME16 very fast.
Signed-off-by: Peter Lieven <pl@kamp.de>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
If the filename given to bdrv_open() is prefixed with "json:", parse the
rest as a JSON object and merge the result into the options QDict. If
there are conflicts, the options QDict takes precedence.
Signed-off-by: Max Reitz <mreitz@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
bdrv_is_allocated() shouldn't return true for sectors that are
unallocated, but after the end of a short backing file, even though
such sectors are (correctly) marked as containing zeros.
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Reviewed-by: Max Reitz <mreitz@redhat.com>
The immediately visible effect of this patch is that it fixes committing
a temporary snapshot to its backing file. Previously, it would fail with
a "permission denied" error because bdrv_inherited_flags() forced the
backing file to be read-only, ignoring the r/w reopen of bdrv_commit().
The bigger problem this revealed is that the original open flags must
actually only be applied to the temporary snapshot, and the original
image file must be treated as a backing file of the temporary snapshot
and get the right flags for that.
Reported-by: Jan Kiszka <jan.kiszka@web.de>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Reviewed-by: Max Reitz <mreitz@redhat.com>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Use the same function as bdrv_open() for determining what the right
flags for bs->file are. Without doing this, a reopen means that
bs->file loses BDRV_O_CACHE_WB or BDRV_O_UNMAP if bs doesn't have it as
well.
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Reviewed-by: Max Reitz <mreitz@redhat.com>
This reverts commit 3a389e7926. The commit
was wrong and what it tried to fix just works today without any change.
What the commit tried to fix:
When creating live snapshots, the new image file is opened with
BDRV_O_NO_BACKING because the whole backing chain is already opened.
It is then appended to the chain using bdrv_append(). The result of
this was that the image had a backing file, but BDRV_O_NO_BACKING
was still set. This is obviously inconsistent.
There used to be some places in qemu that closed and image and then
opened it again, with its old flags (a bdrv_open()/close() sequence
involves reopening the whole backing file chain, too). In this case
the BDRV_O_NO_BACKING flag meant that the backing chain wasn't
reopened and only the top layer was left.
(Most, but not all of these places are replaced by bdrv_reopen()
today, which doesn't touch the backing files at all.)
Other places that looked at bs->open_flags weren't interested in
BDRV_O_NO_BACKING, so no breakage there.
What it actually did:
The commit moved the BDRV_O_NO_BACKING away to the backing file.
Because the bdrv_open()/close() sequences only looked at the flags
of the top level BlockDriverState and used it for the whole chain,
the flag didn't hurt there any more. Obviously, it is still
inconsistent because the backing file may have another backing file,
but without practical impact.
At the same time, it swapped all other flags. This is practically
irrelevant as long as live snapshots only allow opening the new
layer with the same flags as the old top layer. It still doesn't
make any sense, and it is a time bomb that explodes as soon as the
flags can differ.
bdrv_append_temp_snapshot() is such a case: It adds the new flag
BDRV_O_TEMPORARY for the temporary snapshot. The swapping of commit
3a389e79 results in the following nonsensical configuration:
bs->open_flags: BDRV_O_TEMPORARY cleared
bs->file->open_flags: BDRV_O_TEMPORARY set
bs->backing_hd->open_flags: BDRV_O_TEMPORARY set
bs->backing_hd->file->open_flags: BDRV_O_TEMPORARY cleared
We're still lucky because the format layer ignores the flag and the
protocol layer happens to get the right value, but sooner or later
this is bound to go wrong...
What the right fix would have been:
Simply clear the BDRV_O_NO_BACKING flag when the BlockDriverState is
appended to an existing backing file chain, because now it does have
a backing file.
Commit 4ddc07ca already implemented this silently in bdrv_append(),
so we don't have to come up with a new fix.
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Reviewed-by: Max Reitz <mreitz@redhat.com>
Instead of having unlink() calls in the generic block layer, where we
aren't even guarateed to have a file name, move them to those block
drivers that are actually used and that always have a filename. Gets us
rid of some #ifdefs as well.
The patch also converts bs->is_temporary to a new BDRV_O_TEMPORARY open
flag so that it is inherited in the protocol layer and the raw-posix and
raw-win32 drivers can unlink the file.
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Reviewed-by: Max Reitz <mreitz@redhat.com>
Copy on Read makes sense on the format level where backing files are
implemented, but it's not required on the protocol level. While it
shouldn't actively break anything to have COR enabled on both layers,
needless serialisation and allocation checks may impact performance.
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Reviewed-by: Max Reitz <mreitz@redhat.com>
Instead of manipulation flags inline, move the derivation of the flags
of a backing file into a new function next to the existing functions
that derive flags for bs->file and for the block driver open function.
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Reviewed-by: Max Reitz <mreitz@redhat.com>
Instead of having bdrv_open_flags() as a function that creates flags for
several unrelated places and then adding open-coded flags on top, create
a new function that derives the flags for bs->file from the flags for bs.
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Reviewed-by: Max Reitz <mreitz@redhat.com>
Some block drivers have multiple BlockDriver instances with identical
format_name fields (e.g. gluster, nbd).
Both qemu-img and qemu will use bdrv_iterate_format() to list the
supported formats when a help option is invoked. As protocols and
formats may register multiple drivers, redundant listings of formats
occur (e.g., "Supported formats: ... gluster gluster gluster gluster ...
").
Since the list of driver formats will be small, this performs a simple
linear search on format_name, and ignores any duplicates.
The end result change is that the iterator will no longer receive
duplicate string names, nor will it receive NULL pointers.
Signed-off-by: Jeff Cody <jcody@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
error_is_set(&var) is the same as var != NULL, but it takes
whole-program analysis to figure that out. Unnecessarily hard for
optimizers, static checkers, and human readers. Commit 84d18f0 dumbed
it down to obvious, but a few more have crept in since, and
documentation was overlooked. Dumb these down, too.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
In 1.7.1 qcow2_create2 reopen the file for flushing without the BDRV_O_NO_BACKING
flags.
As a consequence the code would recursively open the whole backing chain.
These three stack arrays would pile up through the recursion and lead to a coroutine
stack overflow.
Convert these array to malloced buffers in order to streamline the coroutine
footprint.
Symptoms where freezes or segfaults on production machines while taking QMP externals
snapshots. The overflow disturbed coroutine switching.
[Resolved conflicts on qemu.git/master since the patch was against v1.7.1
--Stefan]
Signed-off-by: Benoit Canet <benoit.canet@gmail.com>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Since commit f298d071, block devices added with blockdev-add don't have
a QemuOpts around in dinfo->opts. Consequently, we can't rely any more
on QemuOpts catching duplicate IDs for block devices.
This patch adds a new check for duplicate IDs to bdrv_new(), and moves
the existing check that the ID isn't already taken for a node-name there
as well.
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
This patch adds an errp parameter to bdrv_new() and updates all its
callers. The next patches will make use of this in order to check for
duplicate IDs. Most of the callers know that their ID is fine, so they
can simply assert that there is no error.
Behaviour doesn't change with this patch yet as bdrv_new() doesn't
actually assign errors to errp.
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
bdrv_getlength could fail, check the return value before using it.
Return NULL and set errno if it fails. Callers are updated to handle
the error case.
Signed-off-by: Fam Zheng <famz@redhat.com>
Reviewed-by: Max Reitz <mreitz@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Insanely large requests could cause an integer overflow in
bdrv_rw_co() while converting sectors to bytes. This patch catches the
problem and returns an error (if we hadn't overflown the integer here,
bdrv_check_byte_request() would have rejected the request, so we're not
breaking anything that was supposed to work before).
We actually do have a test case that triggers behaviour where we
accidentally let such a request pass, so that it would return success,
but read 0 bytes instead of the requested 4 GB. It fails now like it
should.
If the vdi block driver wants to be able to deal with huge images, it
can't read the whole block bitmap at once into memory like it does
today, but needs to use a metadata cache like qcow2 does.
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Commit 8f4754ed intended to protect against integer overflow bugs in
block drivers by making sure that a single request that is passed to
drivers is no longer than INT_MAX bytes.
However, meanwhile there are some callers that don't use that code path
any more but call bdrv_check_byte_request() directy, so let's add a
check there as well.
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Reviewed-by: Max Reitz <mreitz@redhat.com>
Since commit 9fd3171a, BDRV_O_SNAPSHOT uses an option QDict to specify
the originally requested image as the backing file of the newly created
temporary snapshot. This means that the filename is stored in
"file.filename", which is an option that is not parsed for protocol
names. Therefore things like -drive file=nbd:localhost:10809 were
broken because it looked for a local file with the literal name
'nbd:localhost:10809'.
This patch changes the way BDRV_O_SNAPSHOT works once again. We now open
the originally requested image as normal, and then do a similar
operation as for live snapshots to put the temporary snapshot on top.
This way, both driver specific options and parsed filenames work.
As a nice side effect, this results in code movement to factor
bdrv_append_temp_snapshot() out. This is a good preparation for moving
its call to drive_init() and friends eventually.
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Reviewed-by: Max Reitz <mreitz@redhat.com>
When using the QDict option 'filename', it is supposed to be interpreted
literally. The code did correctly avoid guessing the protocol from any
string before the first colon, but it still called bdrv_parse_filename()
which would, for example, incorrectly remove a 'file:' prefix in the
raw-posix driver.
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Reviewed-by: Max Reitz <mreitz@redhat.com>
Limiting the size of a single request to INT_MAX not only fixes a
direct integer overflow in bdrv_check_request() (which would only
trigger bad behaviour with ridiculously huge images, as in close to
2^64 bytes), but can also prevent overflows in all block drivers.
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Reviewed-by: Max Reitz <mreitz@redhat.com>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
If it returns an error, the migrated VM will not be started, but qemu
exits with an error message.
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Reviewed-by: Juan Quintela <quintela@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Benoit Canet <benoit@irqsave.net>
Opening an encrypted image takes an additional step: setting the key.
Between open and the key set, the image must not be used.
We have some protection against accidental use in place: you can't
unpause a guest while we're missing keys. You can, however, hot-plug
block devices lacking keys into a running guest just fine, or insert
media lacking keys. In the latter case, notifying the guest of the
insert is delayed until the key is set, which may suffice to protect
at least some guests in common usage.
This patch makes the protection apply in more cases, in a rather
heavy-handed way: it doesn't let you open encrypted images unless
we're in a paused state.
It doesn't extend the protection to users other than the guest (block
jobs?). Use of runstate_check() from block.c is disgusting. Best I
can do right now.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
If the image file cannot be opened and was created as a temporary file,
it should be deleted; thus, in this case, we should jump to the
"unlink_and_fail" label and not just to "fail".
Reported-by: Benoît Canet <benoit@irqsave.net>
Signed-off-by: Max Reitz <mreitz@redhat.com>
Acked-by: Stefan Hajnoczi <stefanha@redhat.com>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>