A conflict was resolved the wrong way when merging commit 320ba5f (build:
always link device_tree.o into emulators if libfdt available, 2013-02-05).
This causes a build failure for the arm-softmmu target due to multiply
defined symbol.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Message-id: 1362997886-9470-1-git-send-email-pbonzini@redhat.com
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
* origin/master: (75 commits)
tcg: Don't make exitreq flag a local temporary
Makefile: Add subdir dependency on config-devices-all.mak
make_device_config.sh: Emit dependency file to directory where included
Revert "make_device_config.sh: Fix target path in generated dependency file"
s390/virtio-ccw: remove redundant call to blockdev_mark_auto_del
s390/css: Fix subchannel detection
Allow virtio-net features for legacy s390 virtio bus
s390: virtio-ccw maintainer
s390: simplify kvm cpu init
pseries: Add compatible property to root of device tree
target-ppc: Move CPU aliases out of translate_init.c
target-ppc: Report CPU aliases for QMP
target-ppc: List alias names alongside CPU models
target-ppc: Make host CPU a subclass of the host's CPU model
PPC: xnu kernel expects FLUSH to be cleared on STOP
PPC: Fix dma interrupt
target-ppc: Fix PPC_DUMP_SPR_ACCESS build
target-ppc: Synchronize FPU state with KVM
target-ppc: Add mechanism for synchronizing SPRs with KVM
Save memory allocation in the elf loader
...
* bonzini/hw-dirs:
sh: move files referencing CPU to hw/sh4/
ppc: move more files to hw/ppc
ppc: move files referencing CPU to hw/ppc/
m68k: move files referencing CPU to hw/m68k/
i386: move files referencing CPU to hw/i386/
arm: move files referencing CPU to hw/arm/
hw: move boards and other isolated files to hw/ARCH
ppc: express FDT dependency of pSeries and e500 boards via default-configs/
build: always link device_tree.o into emulators if libfdt available
hw: include hw header files with full paths
ppc: do not use ../ in include files
vt82c686: vt82c686 is not a PCI host bridge
virtio-9p: remove PCI dependencies from hw/9pfs/
virtio-9p: use CONFIG_VIRTFS, not CONFIG_LINUX
hw: move device-hotplug.o to toplevel, compile it once
hw: move qdev-monitor.o to toplevel directory
hw: move fifo.[ch] to libqemuutil
hw: move char backends to backends/
Conflicts:
backends/baum.c
backends/msmouse.c
hw/a15mpcore.c
hw/arm/Makefile.objs
hw/arm/pic_cpu.c
hw/dataplane/event-poll.c
hw/dataplane/virtio-blk.c
include/char/baum.h
include/char/msmouse.h
qemu-char.c
vl.c
Resolve conflicts caused by header movements.
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
# By Lei Li (2) and others
# Via Stefan Hajnoczi
* stefanha/trivial-patches:
Fix the wrong description in qemu manual
pci_host: Drop write-only address_space field
rng-random: Use qemu_open / qemu_close
configure: Require at least spice-protocol-0.12.3
osdep: replace setsockopt by qemu_setsockopt
lm32: remove unused function
rtc-test: Fix test failures with recent glib
configure: Create link to icon bitmap for out-of-tree builds
# By Paolo Bonzini (4) and Peter Lieven (2)
# Via Paolo Bonzini
* bonzini/scsi-next:
scsi-disk: handle io_canceled uniformly and correctly
scsi-disk: do not complete canceled UNMAP requests
scsi: do not call scsi_read_data/scsi_write_data for a canceled request
iscsi: look for pkg-config file too
iscsi: add iscsi_truncate support
iscsi: retry read, write, flush and unmap on unit attention check conditions
* 's390-for-upstream' of git://github.com/agraf/qemu:
s390/virtio-ccw: remove redundant call to blockdev_mark_auto_del
s390/css: Fix subchannel detection
Allow virtio-net features for legacy s390 virtio bus
s390: virtio-ccw maintainer
s390: simplify kvm cpu init
* 'ppc-for-upstream' of git://github.com/agraf/qemu: (66 commits)
pseries: Add compatible property to root of device tree
target-ppc: Move CPU aliases out of translate_init.c
target-ppc: Report CPU aliases for QMP
target-ppc: List alias names alongside CPU models
target-ppc: Make host CPU a subclass of the host's CPU model
PPC: xnu kernel expects FLUSH to be cleared on STOP
PPC: Fix dma interrupt
target-ppc: Fix PPC_DUMP_SPR_ACCESS build
target-ppc: Synchronize FPU state with KVM
target-ppc: Add mechanism for synchronizing SPRs with KVM
Save memory allocation in the elf loader
pseries: Implement h_read hcall
target-ppc: Change "POWER7" CPU alias
target-ppc: Fix remaining microcontroller typos among models
target-ppc: Split model definitions out of translate_init.c
target-ppc: Update Coding Style for CPU models
target-ppc: Turn descriptive CPU model comments into device descriptions
target-ppc: Turn descriptive CPU family comments into device descriptions
target-ppc: Set remaining fields on CPU family classes
target-ppc: Register all types for TARGET_PPCEMB
...
blockdev_mark_auto_del is already called in virtio-blk-exit.
Remove the redundant call.
Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com>
Signed-off-by: Jens Freimann <jfrei@linux.vnet.ibm.com>
Signed-off-by: Alexander Graf <agraf@suse.de>
We have to consider the m bit to find the real channel subsystem when
determining the last subchannel.
If we fail to take this into account, removal of a subchannel in
the middle of a big list of devices will stop device detection after
a reboot.
Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com>
Signed-off-by: Jens Freimann <jfrei@linux.vnet.ibm.com>
Reviewed-by: Cornelia Huck <cornelia.huck@de.ibm.com>
Signed-off-by: Alexander Graf <agraf@suse.de>
Enable all virtio-net features for the legacy s390 virtio bus. This also fixes
kernel BUG at /usr/src/packages/BUILD/kernel-default-3.0.58/linux-3.0/drivers/s390/kvm/kvm_virtio.c:121!
Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com>
Cc: qemu-stable@nongnu.org
Signed-off-by: Alexander Graf <agraf@suse.de>
Currently, for the pseries machine the device tree supplied by qemu to SLOF
and from there to the guest does not include a 'compatible property' at the
root level. Usually that works fine, since in this case the compatible
property doesn't really give any information not already found in the
'device_type' or 'model' properties.
However, the lack of 'compatible' confuses the bootloader install in the
SLES11 SP2 and SLES11 SP3 installers. This patch therefore adds a token
'compatible' property to work around that.
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
Cc: qemu-stable@nongnu.org
Signed-off-by: Alexander Graf <agraf@suse.de>
In openbios (drivers/ide.c) they are set to
0000000d 00000000 00000002 00000000
0000000e 00000000 00000003 00000000
0000000f 00000000 00000004 00000000
(The last one seems to be not implemented in qemu)
It follows convention of how they are set on real machines,
both ide and dma ones are increased
Real machine one:
http://web.archive.org/web/20090107151044/http://penguinppc.org/historical/dev-trees-html/g4_agp_500_2.html
00000013 00000001 0000000b 00000000
00000014 00000001 0000000c 00000000
00000015 00000001 0000000d 00000000
Signed-off-by: Amadeusz Sławiński <amade@asmblr.net>
Signed-off-by: Alexander Graf <agraf@suse.de>
The current elf loader uses too much memory. For example, I have a
executable with a bss section of 400 MB and I set the ram size to 512
MB. Qemu uses about 780MB of RAM (which is fine), but there's a peak at
1.6 GB during initialization (this is not fine).
This patch fixes two things:
1) do not allocate each elf program twice.
2) do not allocate memory for areas that are only zeros.
For this we need a new field in Rom: "datasize" which is the size of the
allocated data. If datasize is less than romsize, it means that the area
from datasize to romsize is filled with zeros.
Signed-off-by: Fabien Chouteau <chouteau@adacore.com>
Signed-off-by: Alexander Graf <agraf@suse.de>
This h_call is useful for DLPAR in future amongst other things. Given an index
it fetches the corresponding PTE stored in the htab.
Signed-off-by: Erlon Cruz <erlon.cruz@br.flextronics.com>
Acked-by: David Gibson <david@gibson.dropbear.id.au>
Signed-off-by: Alexander Graf <agraf@suse.de>
Currently the spapr-vlan device does not supply a cleanup call for its
NetClientInfo structure. With current qemu versions, that leads to a SEGV
on exit, when net_cleanup() attempts to call the cleanup handlers on all
net clients.
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
Signed-off-by: Alexander Graf <agraf@suse.de>
virtio-console.c used to return a value less than the number of bytes
asked to be written out to a chardev backend in case the backend is not
writable. virtio-serial-bus.c then implicitly enabled flow control for
that port.
Make this explicit instead.
Signed-off-by: Amit Shah <amit.shah@redhat.com>
Message-id: f5ec50b068c25422256e499cf4adc06d353bf394.1362505276.git.amit.shah@redhat.com
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
The virtio-serial-bus already has the logic to make flow control work
properly. Hook into the char layer's new ability to signal a backend is
writable again.
Signed-off-by: Amit Shah <amit.shah@redhat.com>
Message-id: abffa02235d55ca6e2489068c58971c8897e976c.1362505276.git.amit.shah@redhat.com
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
The address_space field of PCIHostState was only ever written, never used.
Drop it completely.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Andreas Färber <afaerber@suse.de>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
The milkymist-minimac device in fact does not exist at all.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Acked-by: Michael Walle <michael@walle.cc>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
The BIT6 of Status Register(SR):
SR[6] behaves the same as R/B# pin
SR[6] = 0 indicates the device is busy;
SR[6] = 1 means the device is ready
Some NAND flash controller (i.e. ftnandc021) relies on the SR[6]
to determine if the NAND flash erase/program is success or error timeout.
P.S:
The exmaple NAND flash datasheet could be found at following link:
http://www.mxic.com.tw/QuickPlace/hq/PageLibrary4825740B00298A3B.nsf/h_Index/8FEA549237D2F7674825795800104C26/$File/MX30LF1G08AA,%203V,%201Gb,%20v1.1.pdf
Signed-off-by: Kuo-Jung Su <dantesu@gmail.com>
Reviewed-by: Peter Crosthwaite <peter.crosthwaite@xilinx.com>
Signed-off-by: Edgar E. Iglesias <edgar.iglesias@gmail.com>
Always check it immediately after calling bdrv_acct_done, and
always do a "goto done" in case the "done" label has to free
some memory---as is the case for scsi_unmap_complete in the
previous patch.
This patch could fix problems that happen when a request is
split into multiple parts, and one of them is canceled. Then
the next part is fired, but the HBA's cancellation callbacks have
fired already. Whether this happens or not, depends on how the
block/ driver implements AIO cancellation. It it does a simple
bdrv_drain_all() or similar, then it will not have a problem.
If it only cancels the given AIOCB, this scenario could happen.
Cc: qemu-stable@nongnu.org
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Canceled requests should never be completed, and doing that could cause
accesses to a NULL hba_private field.
Cc: qemu-stable@nongnu.org
Reported-by: Stefan Priebe <s.priebe@profihost.ag>
Tested-by: Stefan Priebe <s.priebe@profihost.ag>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Implement support for using the KVM in-kernel GIC for ARM.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Andreas Färber <afaerber@suse.de>
Convert the ARM GIC classes to use init/realize rather than
SysBusDevice::init. (We have to do them all in one patch to
avoid unconverted subclasses calling a nonexistent SysBusDevice
init function in the base class and crashing.)
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Andreas Färber <afaerber@suse.de>
Add presave/postload hooks to the ARM GIC common base class.
These will be used by the KVM in-kernel GIC subclass to sync
state between kernel and userspace when migrating.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Andreas Färber <afaerber@suse.de>
Reviewed-by: Paolo Bonzini <pbonzini@redhat.com>
Add basic support for KVM on ARM architecture.
Signed-off-by: Christoffer Dall <cdall@cs.columbia.edu>
[PMM: Minor tweaks and code cleanup, switch to ONE_REG]
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Paolo Bonzini <pbonzini@redhat.com>
# By MORITA Kazutaka (5) and others
# Via Stefan Hajnoczi
* stefanha/block:
block: for HMP commit() operations on 'all', skip non-COW drives
sheepdog: add support for connecting to unix domain socket
sheepdog: use inet_connect to simplify connect code
sheepdog: accept URIs
move socket_set_nodelay to osdep.c
slirp/tcp_subr.c: fix coding style in tcp_connect
dataplane: remove EventPoll in favor of AioContext
virtio-blk: fix unplug + virsh reboot
ide/macio: Fix macio DMA initialisation.
Mostly bugfixes, but also some ICH work by Laszlo.
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1.4.13 (GNU/Linux)
iQEcBAABAgAGBQJRL1gUAAoJECgfDbjSjVRpIk4IAL17zSadWgd99ZrH6EtZ3/cw
mhuxgm+vRfZPHl82lGC/NthLrTbJ5hpVe1Ff9vrMIkx3OZsh97iqoXS4iPjo9804
Pb5zhDqHJQJDTQKCllb9seu6e5D9Fw3aPp+BcH5QfyEOc/X5l0c5IffRdo6xDT9G
1dDEywntl/wwfCej/kVBu4H7G2/bF7wEMvda7kvBPzZsc6y0TsDSAewk5EX54+/p
wRKw8IBa/T2/ldSoBcqPW1Zd2oeuvKhty4vrXlO1UVZi+uTWNmJxUm6Z1GqNInvE
im0FGlSxwTJF7nX3JQv6tB46GRL8V/IC5+9I5UJc5nT8ScrX4rIxRbJTnsRkn4Y=
=eUQN
-----END PGP SIGNATURE-----
Merge remote-tracking branch 'mst/tags/for_anthony' into staging
virtio,vhost,pci,e1000
Mostly bugfixes, but also some ICH work by Laszlo.
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
# gpg: Signature made Thu 28 Feb 2013 07:13:56 AM CST using RSA key ID D28D5469
# gpg: Can't check signature: public key not found
# By Michael S. Tsirkin (2) and others
# Via Michael S. Tsirkin
* mst/tags/for_anthony:
Set virtio-serial device to have a default of 2 MSI vectors.
ICH9 LPC: Reset Control Register, basic implementation
Fix guest OS hang when 64bit PCI bar present
e1000: unbreak the guest network migration to 1.3
vhost: memory sync fixes
# By Jason Wang (2) and others
# Via Stefan Hajnoczi
* stefanha/net:
qmp: netdev_add is like -netdev, not -net, fix documentation
doc: document -netdev hubport
net: reduce the unnecessary memory allocation of multiqueue
tap: set IFF_ONE_QUEUE per default
tap: forbid creating multiqueue tap when hub is used
net: fix unbounded NetQueue
net: fix qemu_flush_queued_packets() in presence of a hub
During the review of the dataplane code, the EventPoll API morphed itself
(not concidentially) into something very very similar to an AioContext.
Thus, it is trivial to convert virtio-blk-dataplane to use AioContext,
and a first baby step towards letting dataplane talk directly to the
QEMU block layer.
The only interesting note is the value-copy of EventNotifiers. At least
in my opinion this is part of the EventNotifier API and is even portable
to Windows. Of course, in this case you should not close the notifier's
underlying file descriptors or handle with event_notifier_cleanup.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
virtio-blk registers a vmstate change handler. Unfortunately this
handler is not unregistered on unplug, leading to some random
crashes if the system is restarted, e.g. via virsh reboot.
Lets unregister the vmstate change handler if the device is removed.
Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Commit 07a7484e5d accidentally introduced a bug
in the initialisation of the second macio DMA device which could cause some
DMA operations to segfault QEMU.
CC: Andreas Färber <afaerber@suse.de>
Signed-off-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
Acked-by: Andreas Färber <afaerber@suse.de>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Done with this script:
cd hw
for i in `find . -name '*.h' | sed 's/^..//'`; do
echo '\,^#.*include.*["<]'$i'[">], s,'$i',hw/&,'
done | sed -i -f - `find . -type f`
This is so that paths remain valid as files are moved.
Instead, files in hw/dataplane are referenced with the relative path.
We know they are not going to move to include/, and they are the only
include files that are in subdirectories _and_ move.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
