Print a warning when mixing [+-]foo and foo=(on|off) in the -cpu
argument in a way that will break in the future.
Reviewed-by: Igor Mammedov <imammedo@redhat.com>
Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
Some tests use the "-vnc none" option without any clear reason,
making those tests break when --disable-vnc is specified on
./configure. Remove the unnecessary option.
Reviewed-by: John Snow <jsnow@redhat.com>
Tested-by: Corey Minyard <cminyard@mvista.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Acked-by: Kevin Wolf <kwolf@redhat.com>
Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
The block-stream command has traditionally used the 'base' parameter
to indicate the image to copy the data from. This test checks that the
'base-node' parameter can also be used for the same purpose.
Signed-off-by: Alberto Garcia <berto@igalia.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Quorum children are special in the sense that they're not directly
attached to a block backend but they're not used as backing images
either. However the intermediate block streaming code supports
streaming to them. This is a test case for that scenario.
Signed-off-by: Alberto Garcia <berto@igalia.com>
Reviewed-by: Kevin Wolf <kwolf@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
There's many tests that need Quorum support in order to run. At the
moment each test implements its own check to see if Quorum is
enabled. This patch centralizes all those checks in a new function
called iotests.supports_quorum().
Signed-off-by: Alberto Garcia <berto@igalia.com>
Reviewed-by: Kevin Wolf <kwolf@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
As with test_stream_parallel(), we allow mixing block-stream and
block-commit operations in the same backing chain as long as there's
no overlap among the involved nodes.
Signed-off-by: Alberto Garcia <berto@igalia.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
These test cases check that it's not possible to perform two
block-stream or block-commit operations if there are nodes involved in
both.
Signed-off-by: Alberto Garcia <berto@igalia.com>
Reviewed-by: Kevin Wolf <kwolf@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
This test case checks that it's possible to launch several stream
operations in parallel in the same snapshot chain, each one involving
a different set of nodes.
Signed-off-by: Alberto Garcia <berto@igalia.com>
Reviewed-by: Kevin Wolf <kwolf@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
This adds test_stream_intermediate(), similar to test_stream() but
streams to the intermediate image instead.
Signed-off-by: Alberto Garcia <berto@igalia.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Version: GnuPG v2
iQEcBAABCAAGBQJYE2ULAAoJEMo1YkxqkXHGvvAH/iDPIAiwBXbndL3KhQTneSHn
ctd4I3VK1/VVTIBRJIetqETiWiAm/WoRhI9kBc/NrQxBFx3ko+fpSYFS2t6lJYnV
EX0vjTKjFhr05tOTQDH/SQtHdU5x/x2M8SsxqrCcTyLm5VDfdPeBlMBfSNMj/L2K
bwinANVEwr6LOM0h8weQ0SvOCa5MLII2p5ufGwKQmhUY5tgZvFlyPa+quDVisKoE
7CpLwWHmUQSNxUXSaru90osUJyk90wCcYxPpJN3YO1MHvpH4kG8DpZ8bnFqLAoNw
zkRdqIrlfntD+mKDqRU1y0GXxu9I4VK1UDcQyRFoSdMi2oHR+L018sQEjCYTAXo=
=n+CF
-----END PGP SIGNATURE-----
Merge remote-tracking branch 'remotes/famz/tags/for-upstream' into staging
# gpg: Signature made Fri 28 Oct 2016 15:47:39 BST
# gpg: using RSA key 0xCA35624C6A9171C6
# gpg: Good signature from "Fam Zheng <famz@redhat.com>"
# gpg: WARNING: This key is not certified with a trusted signature!
# gpg: There is no indication that the signature belongs to the owner.
# Primary key fingerprint: 5003 7CB7 9706 0F76 F021 AD56 CA35 624C 6A91 71C6
* remotes/famz/tags/for-upstream:
aio: convert from RFifoLock to QemuRecMutex
qemu-thread: introduce QemuRecMutex
iothread: release AioContext around aio_poll
block: only call aio_poll on the current thread's AioContext
qemu-img: call aio_context_acquire/release around block job
qemu-io: acquire AioContext
block: prepare bdrv_reopen_multiple to release AioContext
replication: pass BlockDriverState to reopen_backing_file
iothread: detach all block devices before stopping them
aio: introduce qemu_get_current_aio_context
sheepdog: use BDRV_POLL_WHILE
nfs: use BDRV_POLL_WHILE
nfs: move nfs_set_events out of the while loops
block: introduce BDRV_POLL_WHILE
qed: Implement .bdrv_drain
block: change drain to look only at one child at a time
block: add BDS field to count in-flight requests
mirror: use bdrv_drained_begin/bdrv_drained_end
blockjob: introduce .drain callback for jobs
replication: interrupt failover if the main device is closed
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
This pull request supersedes and extends the one from 2016-10-26
(which had a build bug).
Highlights:
* SLOF (pseries guest firmware) update
* Enable a number of extra testcases on ppc / pseries
* Added the 'powernv' machine type
- Almost enough to be minimally usable
- But still missing necessary interrupt controller updates
* Cleanup and consolidation of NVRAM handling on several platforms
with related firmware
* Substantial cleanup to device tree construction
* Some more POWER9 instruction emulation
* Cleanup to handling of pseries option vectors and CAS reboot
handling (host/guest feature negotiation mechanism)
* Significant cleanups to handling of PCI devices in test cases
* New hotplug event infrastructure
* Memory hot unplug support for pseries
* Several bug fixes
The NVRAM cleanup affects some Sun sparc platforms as well as ppc
ones, but have been tested by the sparc maintainer (Mark Cave-Ayland).
The test additions also include substantial general changes to the
test framework that aren't strictly ppc related. They don't seem to
break tests on other platforms, they're for the benefit of enabling
tests on ppc and there isn't a specific maintainer for them, so
they're included in this tree.
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v2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=3Z5V
-----END PGP SIGNATURE-----
Merge remote-tracking branch 'remotes/dgibson/tags/ppc-for-2.8-20161028' into staging
ppc patch queue 2016-10-28
This pull request supersedes and extends the one from 2016-10-26
(which had a build bug).
Highlights:
* SLOF (pseries guest firmware) update
* Enable a number of extra testcases on ppc / pseries
* Added the 'powernv' machine type
- Almost enough to be minimally usable
- But still missing necessary interrupt controller updates
* Cleanup and consolidation of NVRAM handling on several platforms
with related firmware
* Substantial cleanup to device tree construction
* Some more POWER9 instruction emulation
* Cleanup to handling of pseries option vectors and CAS reboot
handling (host/guest feature negotiation mechanism)
* Significant cleanups to handling of PCI devices in test cases
* New hotplug event infrastructure
* Memory hot unplug support for pseries
* Several bug fixes
The NVRAM cleanup affects some Sun sparc platforms as well as ppc
ones, but have been tested by the sparc maintainer (Mark Cave-Ayland).
The test additions also include substantial general changes to the
test framework that aren't strictly ppc related. They don't seem to
break tests on other platforms, they're for the benefit of enabling
tests on ppc and there isn't a specific maintainer for them, so
they're included in this tree.
# gpg: Signature made Fri 28 Oct 2016 02:37:19 BST
# gpg: using RSA key 0x6C38CACA20D9B392
# gpg: Good signature from "David Gibson <david@gibson.dropbear.id.au>"
# gpg: aka "David Gibson (Red Hat) <dgibson@redhat.com>"
# gpg: aka "David Gibson (ozlabs.org) <dgibson@ozlabs.org>"
# gpg: aka "David Gibson (kernel.org) <dwg@kernel.org>"
# Primary key fingerprint: 75F4 6586 AE61 A66C C44E 87DC 6C38 CACA 20D9 B392
* remotes/dgibson/tags/ppc-for-2.8-20161028: (73 commits)
ppc: allow certain HV interrupts to be delivered to guests
spapr: Memory hot-unplug support
spapr: use count+index for memory hotplug
spapr: Add DRC count indexed hotplug identifier type
spapr: add hotplug interrupt machine options
spapr_events: add support for dedicated hotplug event source
spapr: update spapr hotplug documentation
target-ppc: Add xvcmpnesp, xvcmpnedp instructions
target-ppc: add xscmp[eq,gt,ge,ne]dp instructions
tests: Add pseries machine to the prom-env-test, too
spapr_nvram: Pre-initialize the NVRAM to support the -prom-env parameter
libqos: Change PCI accessors to take opaque BAR handle
tests: Don't assume structure of PCI IO base in ahci-test
tests: Use qpci_mem{read,write} in ivshmem-test
libqos: Add 64-bit PCI IO accessors
tests: Clean up IO handling in ide-test
libqos: Implement mmio accessors in terms of mem{read,write}
libqos: Add streaming accessors for PCI MMIO
tests: Adjust tco-test to use qpci_legacy_iomap()
libqos: Better handling of PCI legacy IO
...
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Some files contain multiple #includes of the same header file.
Removed most of those unnecessary duplicate entries using
scripts/clean-includes.
Reviewed-by: Thomas Huth <thuth@redhat.com>
Signed-off-by: Anand J <anand.indukala@gmail.com>
Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
-----BEGIN PGP SIGNATURE-----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=gsxL
-----END PGP SIGNATURE-----
Merge remote-tracking branch 'remotes/berrange/tags/pull-qio-2016-10-27-1' into staging
Merge qio 2016/10/27 v1
# gpg: Signature made Thu 27 Oct 2016 13:54:03 BST
# gpg: using RSA key 0xBE86EBB415104FDF
# gpg: Good signature from "Daniel P. Berrange <dan@berrange.com>"
# gpg: aka "Daniel P. Berrange <berrange@redhat.com>"
# Primary key fingerprint: DAF3 A6FD B26B 6291 2D0E 8E3F BE86 EBB4 1510 4FDF
* remotes/berrange/tags/pull-qio-2016-10-27-1:
main: set names for main loop sources created
vnc: set name for all I/O channels created
migration: set name for all I/O channels created
char: set name for all I/O channels created
nbd: set name for all I/O channels created
io: add ability to set a name for IO channels
io: Add a QIOChannelSocket cleanup test
io: set LISTEN flag explicitly for listen sockets
io: Introduce a qio_channel_set_feature() helper
io: Use qio_channel_has_feature() where applicable
io: Fix double shift usages on QIOChannel features
Conflicts:
qemu-char.c
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
It is simpler and a bit faster, and QEMU does not need the contention
callbacks (and thus the fairness) anymore.
Reviewed-by: Fam Zheng <famz@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Message-Id: <1477565348-5458-21-git-send-email-pbonzini@redhat.com>
Signed-off-by: Fam Zheng <famz@redhat.com>
This is the first step towards having fine-grained critical sections in
dataplane threads, which will resolve lock ordering problems between
address_space_* functions (which need the BQL when doing MMIO, even
after we complete RCU-based dispatch) and the AioContext.
Because AioContext does not use contention callbacks anymore, the
unit test has to be changed.
Previously applied as a0710f7995 and
then reverted.
Reviewed-by: Fam Zheng <famz@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Message-Id: <1477565348-5458-19-git-send-email-pbonzini@redhat.com>
Signed-off-by: Fam Zheng <famz@redhat.com>
Now that we also support the "-prom-env" parameter for the pseries
machine, we can enable this test for this machine, too. Since booting
with TCG is rather slow with the pseries machine, we also enable
the "-nodefaults" parameter for this test now, so that SLOF does not
have to check that much devices during boot and thus runs a little
bit faster.
Signed-off-by: Thomas Huth <thuth@redhat.com>
[dwg: Don't add -nodefaults to the command line, it causes extra warnings
for the sparc testcases]
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
The usual use model for the libqos PCI functions is to map a specific PCI
BAR using qpci_iomap() then pass the returned token into IO accessor
functions. This, and the fact that iomap() returns a (void *) which
actually contains a PCI space address, kind of suggests that the return
value from iomap is supposed to be an opaque token.
..except that the callers expect to be able to add offsets to it. Which
also assumes the compiler will support pointer arithmetic on a (void *),
and treat it as working with byte offsets.
To clarify this situation change iomap() and the IO accessors to take
a definitely opaque BAR handle (enforced with a wrapper struct) along with
an offset within the BAR. This changes both the functions and all the
callers.
There were a number of places that checked if iomap() returned non-NULL,
and or initialized it to NULL before hand. Since iomap() already assert()s
if it fails to map the BAR, these tests were mostly pointless and are
removed.
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
Reviewed-by: Greg Kurz <groug@kaod.org>
In a couple of places ahci-test makes assumptions about how the tokens
returned from qpci_iomap() are formatted in ways it probably shouldn't.
First in verify_state() it uses a non-NULL token to indicate that the AHCI
device has been enabled (part of enabling is to iomap()). This changes it
to use an explicit 'enabled' flag instead.
Second, it uses the fact that the token contains a PCI address, stored when
the BAR is mapped during initialization to check that the BAR has the same
value after a migration. This changes it to explicitly read the BAR
register before and after the migration and compare.
Together, these changes will make the test more robust against changes to
the internals of the libqos PCI layer.
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
Reviewed-by: John Snow <jsnow@redhat.com>
Reviewed-by: Greg Kurz <groug@kaod.org>
ivshmem implements a block of shared memory in a PCI BAR. Currently our
test case accesses this using qtest_mem{read,write}. However, deducing
the correct addresses for these requires making assumptions about the
internel format returned by qpci_iomap(), along with some ugly casts.
This patch changes the test to use the new qpci_mem{read,write} interfaces
which is neater.
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
Reviewed-by: Laurent Vivier <lvivier@redhat.com>
Reviewed-by: Greg Kurz <groug@kaod.org>
Currently the libqos PCI layer includes accessor helpers for 8, 16 and 32
bit reads and writes. It's likely that we'll want 64-bit accesses in the
future (plenty of modern peripherals will have 64-bit reigsters). This
adds them.
For PIO (not MMIO) accesses on the PC backend, this is implemented as two
32-bit ins or outs. That's not ideal but AFAICT x86 doesn't have 64-bit
versions of in and out.
This patch also converts the single current user of 64-bit accesses -
virtio-pci.c to use the new mechanism, rather than a sequence of 8 byte
reads.
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
Reviewed-by: Laurent Vivier <lvivier@redhat.com>
Reviewed-by: Greg Kurz <groug@kaod.org>
ide-test uses many explicit inb() / outb() operations for its IO, which
means it's not portable to non-x86 platforms. This cleans it up to use
the libqos PCI accessors instead.
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
Reviewed-by: Greg Kurz <groug@kaod.org>
In the libqos PCI code we now have accessors both for registers (byte
significance preserving) and for streaming data (byte address order
preserving). These exist in both the interface for qtest drivers and in
the machine specific backends.
However, the register-style accessors aren't actually necessary in the
backend. They can be implemented in terms of the byte address order
preserving accessors by the libqos wrappers. This works because PCI is
always little endian.
This does assume that the back end byte address order preserving accessors
will perform the equivalent of a single bus transaction for short lengths.
This is the case, and in fact they currently end up using the same
cpu_physical_memory_rw() implementation within the qtest accelerator.
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
Reviewed-by: Laurent Vivier <lvivier@redhat.com>
Reviewed-by: Greg Kurz <groug@kaod.org>
Currently PCI memory (aka MMIO) space is accessed via a set of readb/writeb
style accessors. This is what we want for accessing discrete registers of
a certain size. However, there are a few cases where we instead need a
"bag of bytes" style streaming interface to PCI MMIO space. This can be
either for streaming data style registers or when there's actual memory
rather than registers in PCI space, for example frame buffers or ivshmem.
This patch adds backend callbacks, and libqos wrappers for this type of
byte address order preserving accesses.
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
Reviewed-by: Laurent Vivier <lvivier@redhat.com>
Reviewed-by: Greg Kurz <groug@kaod.org>
Avoid tco-test making assumptions about the internal format of the address
tokens passed to PCI IO accessors, by using the new qpci_legacy_iomap()
function.
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
Reviewed-by: Laurent Vivier <lvivier@redhat.com>
Reviewed-by: Greg Kurz <groug@kaod.org>
The usual model for PCI IO with libqos is to use qpci_iomap() to map a
specific BAR for a PCI device, then perform IOs within that BAR using
qpci_io_{read,write}*().
However, certain devices also have legacy PCI IO. In this case, instead of
(or as well as) being accessed via PCI BARs, the device can be accessed
via certain well-known, fixed addresses in PCI IO space.
Two existing tests use legacy PCI IO, and take different flawed approaches
to it:
* tco-test manually constructs a tco_io_base value instead of calling
qpci_iomap(), which assumes internal knowledge of the structure of
the value it shouldn't have
* ide-test uses direct in*() and out*() calls instead of using
qpci_io_*() accessors, meaning it's not portable to non-x86 machine
types.
This patch implements a new qpci_iomap_legacy() interface which gets a
handle in the same format as qpci_iomap() but refers to a region in
the legacy PIO space. For a device which has the same registers
available both in a BAR and in legacy space (quite common), this
allows the same test code to test both options with just a different
iomap() at the beginning.
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
Reviewed-by: Laurent Vivier <lvivier@redhat.com>
Reviewed-by: Greg Kurz <groug@kaod.org>
The PCI backends in libqos each supply an iomap() and iounmap() function
which is used to set up a specified PCI BAR. But PCI BAR allocation takes
place entirely within PCI space, so doesn't really need per-backend
versions. For example, Linux includes generic BAR allocation code used on
platforms where that isn't done by firmware.
This patch merges the BAR allocation from the two existing backends into a
single simplified copy. The back ends just need to set up some parameters
describing the window of PCI IO and PCI memory addresses which are
available for allocation. Like both the existing versions the new one uses
a simple bump allocator.
Note that (again like the existing versions) this doesn't really handle
64-bit memory BARs properly. It is actually used for such a BAR by the
ivshmem test, and apparently the 32-bit MMIO BAR logic is close enough to
work, as long as the BAR isn't too big. Fixing that to properly handle
64-bit BAR allocation is a problem for another time.
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
Reviewed-by: Laurent Vivier <lvivier@redhat.com>
Reviewed-by: Greg Kurz <groug@kaod.org>
The PCI IO space (aka PIO, aka legacy IO) and PCI memory space (aka MMIO)
are distinct address spaces by the PCI spec (although parts of one might be
aliased to parts of the other in some cases).
However, qpci_io_read*() and qpci_io_write*() can perform accesses to
either space depending on parameter. That's convenient for test case
drivers, since there are a fair few devices which can be controlled via
either a PIO or MMIO BAR but with an otherwise identical driver.
This is implemented by having addresses below 64kiB treated as PIO, and
those above treated as MMIO. This works because low addresses in memory
space are generally reserved for DMA rather than MMIO.
At the moment, this demultiplexing must be handled by each PCI backend
(pc and spapr, so far). There's no real reason for this - the current
encoding is likely to work for all platforms, and even if it doesn't we
can still use a more complex common encoding since the value returned from
iomap are semi-opaque.
This patch moves the demultiplexing into the common part of the libqos PCI
code, with the backends having simpler, separate accessors for PIO and
MMIO space. This also means we have a way of explicitly accessing either
space if it's necessary for some special case.
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
Reviewed-by: Laurent Vivier <lvivier@redhat.com>
Reviewed-by: Greg Kurz <groug@kaod.org>
The 'addr' parameter to qvirtio_config_read*() doesn't have a consistent
meaning: when using the virtio-pci versions, it's a full PCI space address,
but for virtio-mmio, it's an offset from the device's base mmio address.
This means that the callers need to do different things to calculate the
addresses in the two cases, which rather defeats the purpose of function
pointer backends.
All the current users of these functions are using them to retrieve
variables from the device specific portion of the virtio config space.
So, this patch alters the semantics to always be an offset into that
device specific config area.
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
Reviewed-by: Laurent Vivier <lvivier@redhat.com>
Reviewed-by: Greg Kurz <groug@kaod.org>
Everything that is related to CHRP NVRAM should rather reside in
chrp_nvram.c / chrp_nvram.h instead of openbios_firmware_abi.h.
Signed-off-by: Thomas Huth <thuth@redhat.com>
Tested-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
but disable MSI-X tests on SPAPR as we can't check the result
(the memory region used on PC is not readable on SPAPR).
Signed-off-by: Laurent Vivier <lvivier@redhat.com>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
This patch replaces calls to qtest_start() and qtest_end() by
calls to qtest_pc_boot() and qtest_shutdown().
This allows to initialize memory allocator and PCI interface
functions. This will ease to enable virtio tests on other
architectures by only adding a specific qtest_XXX_boot() (like
qtest_spapr_boot()).
Signed-off-by: Laurent Vivier <lvivier@redhat.com>
Reviewed-by: Greg Kurz <groug@kaod.org>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
Move the definition to libqos/virtio.h as it must be used
only with virtio functions.
Add a QVirtioDevice parameter as it will be needed to
know if the virtio device is using virtio 1.0 specification
and thus is always little-endian (to do)
Signed-off-by: Laurent Vivier <lvivier@redhat.com>
Reviewed-by: Greg Kurz <groug@kaod.org>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
This allows to not have to pass bus and device for every virtio functions.
Signed-off-by: Laurent Vivier <lvivier@redhat.com>
Reviewed-by: Greg Kurz <groug@kaod.org>
Reviewed-by: Thomas Huth <thuth@redhat.com>
[dwg: Fix style nit]
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
qtest_spapr_boot()/qtest_pc_boot()/qtest_boot() call qtest_vboot()
and qtest_vboot() calls g_malloc(),
and g_malloc() never fails:
if memory allocation fails, the application is terminated.
Signed-off-by: Laurent Vivier <lvivier@redhat.com>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Reviewed-by: Greg Kurz <groug@kaod.org>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
vs is allocated in qvirtio_scsi_pci_init() and never freed.
Signed-off-by: Laurent Vivier <lvivier@redhat.com>
Reviewed-by: Greg Kurz <groug@kaod.org>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
This tests the different supported methods to create floppy drives and
how they interact.
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Message-id: 1477386868-21826-5-git-send-email-kwolf@redhat.com
Signed-off-by: John Snow <jsnow@redhat.com>
Since the order of keys in JSON filenames is not necessarily fixed, they
should not be compared to fixed strings. This method takes a Python dict
as a reference, parses a given JSON filename and compares both.
Signed-off-by: Max Reitz <mreitz@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
This gives us more freedom about the fd that is passed to qemu, allowing
us to e.g. pass sockets.
Reviewed-by: Kevin Wolf <kwolf@redhat.com>
Signed-off-by: Max Reitz <mreitz@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
By adding an optional suffix to the files used for communication with a
VM, we can launch multiple VM instances concurrently.
Reviewed-by: Kevin Wolf <kwolf@redhat.com>
Signed-off-by: Max Reitz <mreitz@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Add a new option "server" to the NBD block driver which accepts a
SocketAddress.
"path", "host" and "port" are still supported as legacy options and are
mapped to their corresponding SocketAddress representation.
Signed-off-by: Max Reitz <mreitz@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Kevin Wolf <kwolf@redhat.com>
Signed-off-by: Max Reitz <mreitz@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Commit 076003f5 added configuration for NFS with IMGOPTSSYNTAX enabled,
but it didn't use the right variable name: $TEST_DIR_OPTS doesn't exist.
This fixes the mistake.
However, this doesn't make anything work that was broken before: The
only way to get IMGOPTSSYNTAX is with -luks, but the combination of
-luks and -nfs doesn't get qemu-img create commands right (because
qemu-img create doesn't support --image-opts yet), so even after this
fix some more work would be required to make the tests pass.
Reported-by: Tomáš Golembiovský <tgolembi@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
This patch adds a test to verify that the QIOChannel framework will not
unlink a filesystem unix socket unless the _FEATURE_LISTEN bit is set.
Due to a bug introduced in 74b6ce43, the framework would unlink the
entry if the _FEATURE_SHUTDOWN bit was set, regardless of the presence
of _FEATURE_LISTEN.
Signed-off-by: Felipe Franciosi <felipe@nutanix.com>
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
With this microbenchmark we can measure the overhead of emulating atomic
instructions with a configurable degree of contention.
The benchmark spawns $n threads, each performing $o atomic ops (additions)
in a loop. Each atomic operation is performed on a different cache line
(assuming lines are 64b long) that is randomly selected from a range [0, $r).
[ Note: each $foo corresponds to a -foo flag ]
Signed-off-by: Emilio G. Cota <cota@braap.org>
Signed-off-by: Richard Henderson <rth@twiddle.net>
Message-Id: <1467054136-10430-20-git-send-email-cota@braap.org>
The qdict_flatten() method will take a dict whose elements are
further nested dicts/lists and flatten them by concatenating
keys.
The qdict_crumple() method aims to do the reverse, taking a flat
qdict, and turning it into a set of nested dicts/lists. It will
apply nesting based on the key name, with a '.' indicating a
new level in the hierarchy. If the keys in the nested structure
are all numeric, it will create a list, otherwise it will create
a dict.
If the keys are a mixture of numeric and non-numeric, or the
numeric keys are not in strictly ascending order, an error will
be reported.
As an example, a flat dict containing
{
'foo.0.bar': 'one',
'foo.0.wizz': '1',
'foo.1.bar': 'two',
'foo.1.wizz': '2'
}
will get turned into a dict with one element 'foo' whose
value is a list. The list elements will each in turn be
dicts.
{
'foo': [
{ 'bar': 'one', 'wizz': '1' },
{ 'bar': 'two', 'wizz': '2' }
],
}
If the key is intended to contain a literal '.', then it must
be escaped as '..'. ie a flat dict
{
'foo..bar': 'wizz',
'bar.foo..bar': 'eek',
'bar.hello': 'world'
}
Will end up as
{
'foo.bar': 'wizz',
'bar': {
'foo.bar': 'eek',
'hello': 'world'
}
}
The intent of this function is that it allows a set of QemuOpts
to be turned into a nested data structure that mirrors the nesting
used when the same object is defined over QMP.
Reviewed-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Kevin Wolf <kwolf@redhat.com>
Reviewed-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
Message-Id: <1475246744-29302-3-git-send-email-berrange@redhat.com>
Reviewed-by: Markus Armbruster <armbru@redhat.com>
[Parameter recursive dropped along with its tests; whitespace style
touched up]
Signed-off-by: Markus Armbruster <armbru@redhat.com>
The input_visitor_test_add() method was accepting an instance
of 'TestInputVisitorData' and passing it as the 'user_data'
parameter to test functions. The main 'TestInputVisitorData'
instance that was actually used, was meanwhile being allocated
automatically by the test framework fixture setup.
The 'user_data' parameter is going to be needed for tests
added in later patches, so getting rid of the current mistaken
usage now allows this.
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
Message-Id: <1475246744-29302-7-git-send-email-berrange@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Kevin Wolf <kwolf@redhat.com>
Reviewed-by: Markus Armbruster <armbru@redhat.com>
Signed-off-by: Markus Armbruster <armbru@redhat.com>
The QmpOutputVisitor has no direct dependency on QMP. It is
valid to use it anywhere that one wants a QObject. Rename it
to better reflect its functionality as a generic QAPI
to QObject converter.
The commit before previous renamed the files, this one renames C
identifiers.
Reviewed-by: Kevin Wolf <kwolf@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
Message-Id: <1475246744-29302-6-git-send-email-berrange@redhat.com>
Reviewed-by: Markus Armbruster <armbru@redhat.com>
[Split into file rename and identifier rename]
Signed-off-by: Markus Armbruster <armbru@redhat.com>
The QmpInputVisitor has no direct dependency on QMP. It is
valid to use it anywhere that one has a QObject. Rename it
to better reflect its functionality as a generic QObject
to QAPI converter.
The previous commit renamed the files, this one renames C identifiers.
Reviewed-by: Kevin Wolf <kwolf@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
Message-Id: <1475246744-29302-5-git-send-email-berrange@redhat.com>
Reviewed-by: Markus Armbruster <armbru@redhat.com>
[Straightforwardly rebased, split into file and identifier rename]
Signed-off-by: Markus Armbruster <armbru@redhat.com>
The QMP visitors have no direct dependency on QMP. It is
valid to use them anywhere that one has a QObject. Rename them
to better reflect their functionality as a generic QObject
to QAPI converter.
This is the first of three parts: rename the files. The next two
parts will rename C identifiers. The split is necessary to make git
rename detection work.
Reviewed-by: Kevin Wolf <kwolf@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
Reviewed-by: Markus Armbruster <armbru@redhat.com>
[Split into file and identifier rename, two comments touched up]
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Commit ea3af47 accidentally dropped check-qdict from the list of unit
tests. Put it back.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Message-id: 1477386565-26225-1-git-send-email-armbru@redhat.com
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
There are some (mostly ISP-specific) name servers who will redirect
non-existing domains to special hosts. In this case, we will get a
different error message when trying to connect to such a host, which
breaks test 162.
162 needed this specific error message so it can confirm that qemu was
indeed trying to connect to the user-specified port. However, we can
also confirm this by setting up a local NBD server on exactly that port;
so we can fix the issue by doing just that.
Reported-by: Stefan Hajnoczi <stefanha@redhat.com>
Signed-off-by: Max Reitz <mreitz@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
With qemu-nbd's new --fork option, we no longer need to launch it the
hacky way.
Suggested-by: Sascha Silbe <silbe@linux.vnet.ibm.com>
Signed-off-by: Max Reitz <mreitz@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
iotest 093 contains a test that creates a throttling group with
several drives and performs I/O in all of them. This patch adds a new
test that creates a similar setup but only performs I/O in one of the
drives at the same time.
This is useful to test that the round robin algorithm is behaving
properly in these scenarios, and is specifically written using the
regression introduced in 27ccdd5259 as an example.
Signed-off-by: Alberto Garcia <berto@igalia.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Now that QAPI supports boxed types, we can have unions at the top level
of a command, so let's put our real options directly there for
blockdev-add instead of having a single "options" dict that contains the
real arguments.
blockdev-add is still experimental and we already made substantial
changes to the API recently, so we're free to make changes like this
one, too.
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Fam Zheng <famz@redhat.com>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Reviewed-by: Max Reitz <mreitz@redhat.com>
ARM MPTimer is a per-CPU core timer, essential part of the ARM Cortex-A9
MPCore. Add QTests for it.
Signed-off-by: Dmitry Osipenko <digetx@gmail.com>
Message-id: 1c9a2f1c80f87e935b4a28919457c81b6b2256e9.1475421224.git.digetx@gmail.com
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
The 10000 is an arbitrarily chosen value used for advancing the QEMU
time, so that ptimer's now != last. Change it to 1 to make code a bit
more readable.
Signed-off-by: Dmitry Osipenko <digetx@gmail.com>
Message-id: 63256eaac54c84dac7c797f41296cc49e751d09d.1475421224.git.digetx@gmail.com
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Eric Blake suggested that use of "Author:" in the copyright text of the
files created by individuals is incorrect, replace it with "Copyright".
Signed-off-by: Dmitry Osipenko <digetx@gmail.com>
Message-id: 9d8b626f462d4a5094b1945fbd763b8a2e28dd86.1475421224.git.digetx@gmail.com
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
PTIMER_POLICY_NO_COUNTER_ROUND_DOWN makes ptimer_get_count() return the
actual counter value and not the one less.
Signed-off-by: Dmitry Osipenko <digetx@gmail.com>
Message-id: 0082889309b3dc66c03c8de00b8c1ef40c1e3955.1475421224.git.digetx@gmail.com
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
PTIMER_POLICY_NO_IMMEDIATE_RELOAD makes ptimer to not to re-load
counter on setting counter value to "0" or starting to run with "0".
Signed-off-by: Dmitry Osipenko <digetx@gmail.com>
Message-id: a7acf805e447cc7f637ecacbd45cca34ea3bf425.1475421224.git.digetx@gmail.com
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
PTIMER_POLICY_NO_IMMEDIATE_TRIGGER makes ptimer to not to trigger on starting
to run with / setting counter to "0".
Signed-off-by: Dmitry Osipenko <digetx@gmail.com>
Message-id: 12b1e745f90fe2ca3d59197166bc3d379260f912.1475421224.git.digetx@gmail.com
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
PTIMER_POLICY_CONTINUOUS_TRIGGER makes periodic ptimer to re-trigger every
period in case of load = delta = 0.
Signed-off-by: Dmitry Osipenko <digetx@gmail.com>
Message-id: 7a908ab38b902d521eb959941f9efe2df8ce4297.1475421224.git.digetx@gmail.com
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
PTIMER_POLICY_WRAP_AFTER_ONE_PERIOD changes ptimer behaviour in a such way,
that it would wrap around after one period instead of doing it immediately.
Signed-off-by: Dmitry Osipenko <digetx@gmail.com>
Message-id: ce27bb84ed9f2b64300dd4e90f3eff235a7dcedf.1475421224.git.digetx@gmail.com
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
No need to keep explicit_fe_open around if it affects only a
qemu_chr_fe_set_handlers(). Use an additional argument instead.
Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Message-Id: <20161022095318.17775-24-marcandre.lureau@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Now that all front end use qemu_chr_fe_init(), we can move chardev
claiming in init(), and add a function deinit() to release the chardev
and cleanup handlers.
The qemu_chr_fe_claim_no_fail() for property are gone, since the
property will raise an error instead. In other cases, where there is
already an error path, an error is raised instead. Finally, other cases
are handled by &error_abort in qemu_chr_fe_init().
Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Message-Id: <20161022095318.17775-19-marcandre.lureau@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
This also switches from qemu_chr_add_handlers() to
qemu_chr_fe_set_handlers(). Note that qemu_chr_fe_set_handlers() now
takes the focus when fe_open (qemu_chr_add_handlers() did take the
focus)
Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Message-Id: <20161022095318.17775-16-marcandre.lureau@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
qemu_chr_accept_input() and qemu_chr_disconnect() are only used by
frontend, so use qemu_chr_fe prefix.
Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Message-Id: <20161022095318.17775-14-marcandre.lureau@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Similar to previous change, for the remaining CharDriverState front ends
users.
Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Message-Id: <20161022095318.17775-13-marcandre.lureau@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
The CharDriverState.init() callback is no longer set since commit
a61ae7f88c and thus unused. The only user, the malta FGPA display has
been converted to use an event "opened" callback instead.
Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Message-Id: <20161022095318.17775-7-marcandre.lureau@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
test_start/stop are used only as flags to loop on. Barriers are unnecessary,
since no dependent data is transferred among threads apart from the flags
themselves.
This commit relaxes the three accesses to test_start/stop that were
not yet relaxed.
Signed-off-by: Emilio G. Cota <cota@braap.org>
The test-io-channel-tls test was missing a call to qcrypto_init
and test-crypto-hash was initializing it multiple times,
Reviewed-by: Eric Blake <eblake@redhat.com>
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
CC tests/test-crypto-tlscredsx509.o
CC tests/crypto-tls-x509-helpers.o
CC tests/pkix_asn1_tab.o
tests/pkix_asn1_tab.c:7:22: warning: libtasn1.h: No such file or directory
tests/pkix_asn1_tab.c:9: error: expected ‘=’, ‘,’, ‘;’, ‘asm’ or ‘__attribute__’ before ‘pkix_asn1_tab’
make: *** [tests/pkix_asn1_tab.o] Error 1
Signed-off-by: Gonglei <arei.gonglei@huawei.com>
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
Introduce CTR mode support for the cipher APIs.
CTR mode uses a counter rather than a traditional IV.
The counter has additional properties, including a nonce
and initial counter block. We reuse the ctx->iv as
the counter for conveniences.
Both libgcrypt and nettle are support CTR mode, the
cipher-builtin doesn't support yet.
Signed-off-by: Gonglei <arei.gonglei@huawei.com>
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
It can't guarantee all cipher modes are supported
if one cipher algorithm is supported by a backend.
Let's extend qcrypto_cipher_supports() to take both
the algorithm and mode as parameters.
Signed-off-by: Gonglei <arei.gonglei@huawei.com>
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
1) ptimer-test is not a qtest---it runs the ptimer.c code directly in the
ptimer-test process
2) ptimer-test has its own stubs file, so there is no need to add more
stubs to stubs/vmstate.c
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Reviewed-by: Dmitry Osipenko <digetx@gmail.com>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
This test uses the palmetto platform and the Aspeed SPI controller to
test the m25p80 flash module device model. The flash model is defined
by the platform (n25q256a) and it would be nice to find way to control
it, using a property probably.
Signed-off-by: Cédric Le Goater <clg@kaod.org>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Message-id: 1475787271-28794-1-git-send-email-clg@kaod.org
Brainstormed-with: Greg Kurz <groug@kaod.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Highlights:
* Significant rework of how PCI IO windows are placed for the
pseries machine type
* A number of extra tests added for ppc
* Other tests clean up / fixed
* Some cleanups to the XICS interrupt controller in preparation
for the 'powernv' machine type
A number of the test changes aren't strictly in ppc related code, but
are included via my tree because they're primarily focused on
improving test coverage for ppc.
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v2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=tnCe
-----END PGP SIGNATURE-----
Merge remote-tracking branch 'remotes/dgibson/tags/ppc-for-2.8-20161017' into staging
ppc patch queue 2016-10-17
Highlights:
* Significant rework of how PCI IO windows are placed for the
pseries machine type
* A number of extra tests added for ppc
* Other tests clean up / fixed
* Some cleanups to the XICS interrupt controller in preparation
for the 'powernv' machine type
A number of the test changes aren't strictly in ppc related code, but
are included via my tree because they're primarily focused on
improving test coverage for ppc.
# gpg: Signature made Mon 17 Oct 2016 03:42:41 BST
# gpg: using RSA key 0x6C38CACA20D9B392
# gpg: Good signature from "David Gibson <david@gibson.dropbear.id.au>"
# gpg: aka "David Gibson (Red Hat) <dgibson@redhat.com>"
# gpg: aka "David Gibson (ozlabs.org) <dgibson@ozlabs.org>"
# gpg: aka "David Gibson (kernel.org) <dwg@kernel.org>"
# Primary key fingerprint: 75F4 6586 AE61 A66C C44E 87DC 6C38 CACA 20D9 B392
* remotes/dgibson/tags/ppc-for-2.8-20161017:
spapr: Improved placement of PCI host bridges in guest memory map
spapr_pci: Add a 64-bit MMIO window
spapr: Adjust placement of PCI host bridge to allow > 1TiB RAM
spapr_pci: Delegate placement of PCI host bridges to machine type
libqos: Limit spapr-pci to 32-bit MMIO for now
libqos: Correct error in PCI hole sizing for spapr
libqos: Isolate knowledge of spapr memory map to qpci_init_spapr()
ppc/xics: Split ICS into ics-base and ics class
ppc/xics: Make the ICSState a list
spapr: fix inheritance chain for default machine options
target-ppc: implement vexts[bh]2w and vexts[bhw]2d
tests/boot-sector: Increase time-out to 90 seconds
tests/boot-sector: Use mkstemp() to create a unique file name
tests/boot-sector: Use minimum length for the Forth boot script
qtest: ask endianness of the target in qtest_init()
tests: minor cleanups in usb-hcd-uhci-test
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
This re-factors the docker makefile to include a docker-run target which
can be controlled entirely from environment variables specified on the
make command line. This allows us to run against any given docker image
we may have in our repository, for example:
make docker-run TEST="test-quick" IMAGE="debian:arm64" \
EXECUTABLE=./aarch64-linux-user/qemu-aarch64
The existing docker-foo@bar targets still work but the inline
verification has been dropped because we already don't hit that due to
other pattern rules in rules.mak.
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Message-Id: <20161011161625.9070-5-alex.bennee@linaro.org>
Message-Id: <20161011161625.9070-6-alex.bennee@linaro.org>
[Squash in the verification removal patch. - Fam]
Signed-off-by: Fam Zheng <famz@redhat.com>
The other builders honour this variable, so should the mingw build.
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Message-Id: <20161011161625.9070-4-alex.bennee@linaro.org>
Signed-off-by: Fam Zheng <famz@redhat.com>
Much like test-quick but only builds. This is useful for some of the
build targets like ThreadSanitizer that don't yet pass "make check".
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Message-Id: <20161011161625.9070-3-alex.bennee@linaro.org>
Signed-off-by: Fam Zheng <famz@redhat.com>
This target grabs the latest Travis containers from their repository at
quay.io and then installs QEMU's build dependencies. With this it is
possible to run on broadly the same setup as they have on travis-ci.org.
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Message-Id: <20161011161625.9070-2-alex.bennee@linaro.org>
Signed-off-by: Fam Zheng <famz@redhat.com>
Currently, the MMIO space for accessing PCI on pseries guests begins at
1 TiB in guest address space. Each PCI host bridge (PHB) has a 64 GiB
chunk of address space in which it places its outbound PIO and 32-bit and
64-bit MMIO windows.
This scheme as several problems:
- It limits guest RAM to 1 TiB (though we have a limited fix for this
now)
- It limits the total MMIO window to 64 GiB. This is not always enough
for some of the large nVidia GPGPU cards
- Putting all the windows into a single 64 GiB area means that naturally
aligning things within there will waste more address space.
In addition there was a miscalculation in some of the defaults, which meant
that the MMIO windows for each PHB actually slightly overran the 64 GiB
region for that PHB. We got away without nasty consequences because
the overrun fit within an unused area at the beginning of the next PHB's
region, but it's not pretty.
This patch implements a new scheme which addresses those problems, and is
also closer to what bare metal hardware and pHyp guests generally use.
Because some guest versions (including most current distro kernels) can't
access PCI MMIO above 64 TiB, we put all the PCI windows between 32 TiB and
64 TiB. This is broken into 1 TiB chunks. The first 1 TiB contains the
PIO (64 kiB) and 32-bit MMIO (2 GiB) windows for all of the PHBs. Each
subsequent TiB chunk contains a naturally aligned 64-bit MMIO window for
one PHB each.
This reduces the number of allowed PHBs (without full manual configuration
of all the windows) from 256 to 31, but this should still be plenty in
practice.
We also change some of the default window sizes for manually configured
PHBs to saner values.
Finally we adjust some tests and libqos so that it correctly uses the new
default locations. Ideally it would parse the device tree given to the
guest, but that's a more complex problem for another time.
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
Reviewed-by: Laurent Vivier <lvivier@redhat.com>
Currently the functions in pci-spapr.c (like pci-pc.c on which it's based)
don't distinguish between 32-bit and 64-bit PCI MMIO. At the moment, the
qemu side implementation is a bit weird and has a single MMIO window
straddling 32-bit and 64-bit regions, but we're likely to change that in
future.
In any case, pci-pc.c - and therefore the testcases using PCI - only handle
32-bit MMIOs for now. For spapr despite whatever changes might happen with
the MMIO windows, the 32-bit window is likely to remain at 2..4 GiB in PCI
space.
So, explicitly limit pci-spapr.c to 32-bit MMIOs for now, we can add 64-bit
MMIO support back in when and if we need it.
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
Reviewed-by: Laurent Vivier <lvivier@redhat.com>
In pci-spapr.c (as in pci-pc.c from which it was derived), the
pci_hole_start/pci_hole_size and pci_iohole_start/pci_iohole_size pairs[1]
essentially define the region of PCI (not CPU) addresses in which MMIO
or PIO BARs respectively will be allocated.
The size value is relative to the start value. But in pci-spapr.c it is
set to the entire size of the window supported by the (emulated) hardware,
but the start values are *not* at the beginning of the emulated windows.
That means if you tried to map enough PCI BARs, we'd messily overrun the
IO windows, instead of failing in iomap as we should.
This patch corrects this by calculating the hole sizes from the location
of the window in PCI space and the hole start.
[1] Those are bad names, but that's a problem for another time.
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
Reviewed-by: Laurent Vivier <lvivier@redhat.com>
The libqos code for accessing PCI on the spapr machine type uses IOBASE()
and MMIOBASE() macros to determine the address in the CPU memory map of
the windows to PCI address space.
This is a detail of the implementation of PCI in the machine type, it's not
specified by the PAPR standard. Real guests would get the addresses of the
PCI windows from the device tree.
Finding the device tree in libqos would be awkward, but we can at least
localize this knowledge of the implementation to the init function, saving
it in the QPCIBusSPAPR structure for use by the accessors.
That leaves only one place to fix if we alter the location of the PCI
windows, as we're planning to do.
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
Reviewed-by: Laurent Vivier <lvivier@redhat.com>
Since the PXE tester runs rather slow on ppc64 with tcg, there
is a chance that we hit the 60 seconds timeout on machines that
have a heavy CPU load. So let's increase the timeout to ease
the situation.
Signed-off-by: Thomas Huth <thuth@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
The pxe-test is run for three different targets now (x86_64, i386
and ppc64), and the bios-tables-test is run for two targets (x86_64
and i386). But each of the tests is using an invariant name for the
disk image with the boot sector code - so if the tests are running in
parallel, there is a race condition that they destroy the disk image
of a parallel test program. Let's use mkstemp() to create unique
temporary files here instead - and since mkstemp() is returning an
integer file descriptor instead of a FILE pointer, we also switch
the fwrite() and fclose() to write() and close() instead.
Reported-by: Sascha Silbe <x-qemu@se-silbe.de>
Signed-off-by: Thomas Huth <thuth@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
The pxe-test is quite slow on ppc64 with tcg. We can speed it up
a little bit by decreasing the size of the file that has to be
loaded via TFTP.
Signed-off-by: Thomas Huth <thuth@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
The target endianness is not deduced anymore from
the architecture name but asked directly to the guest,
using a new qtest command: "endianness". As it can't
change (this is the value of TARGET_WORDS_BIGENDIAN),
we store it to not have to ask every time we want to
know if we have to byte-swap a value.
Signed-off-by: Laurent Vivier <lvivier@redhat.com>
CC: Greg Kurz <groug@kaod.org>
CC: David Gibson <david@gibson.dropbear.id.au>
CC: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
Two minor cleanups:
- exit gracefully in case on unsupported target,
- put machine command line in a constant to avoid
to duplicate it.
Signed-off-by: Laurent Vivier <lvivier@redhat.com>
Reviewed-by: Gerd Hoffmann <kraxel@redhat.com>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1
iQEcBAABCAAGBQJX+LTGAAoJEHAbT2saaT5ZIBwH+wfho+xxruEjro6qPvSAtdKk
BBsOWBfBoqWfbAbOxxCO8ina2nA7p5XbyzSXUr94nZhvZMB9BkgL6la03gdS0Yr2
jHf0J9mM8fIbMQFsEKGOPcdpvU7VEXeFwridZYzypiRvbNSdWK3SKVBKgz2ADNhb
l4Tos81IZeH/mw8HcU3XgSGSTV4JuKP4XsnmwlFMa8/sWM/X3vVgx5IG26KURZQm
pW720jcX0meSfji5YvhspfbBbp1g2EorTZb6iLcZf+OUIB6XkViMisVasnyOo2HJ
cehPlhAHixwq1kXGItc1fs11VloZ6hvEZ7kZ615jAdsD2sGJObtGDxgyJW3+gPo=
=HPHj
-----END PGP SIGNATURE-----
Merge remote-tracking branch 'remotes/mjt/tags/trivial-patches-fetch' into staging
trivial patches for 2016-10-08
# gpg: Signature made Sat 08 Oct 2016 09:56:38 BST
# gpg: using RSA key 0x701B4F6B1A693E59
# gpg: Good signature from "Michael Tokarev <mjt@tls.msk.ru>"
# gpg: aka "Michael Tokarev <mjt@corpit.ru>"
# gpg: aka "Michael Tokarev <mjt@debian.org>"
# Primary key fingerprint: 6EE1 95D1 886E 8FFB 810D 4324 457C E0A0 8044 65C5
# Subkey fingerprint: 7B73 BAD6 8BE7 A2C2 8931 4B22 701B 4F6B 1A69 3E59
* remotes/mjt/tags/trivial-patches-fetch: (26 commits)
net/filter-mirror: Fix mirror initial check typo
virtio: rename the bar index field name in VirtIOPCIProxy
linux-user: include <poll.h> instead of <sys/poll.h>
char: fix missing return in error path for chardev TLS init
CODING_STYLE: Fix a typo ("have" vs. "has")
bitmap: refine and move BITMAP_{FIRST/LAST}_WORD_MASK
build-sys: fix find-in-path
m68k: change default system clock for m5208evb
exec: remove unused compacted argument
usb: ehci: fix memory leak in ehci_process_itd
qapi: make the json schema files more regular.
maint: Add module_block.h to .gitignore
MAINTAINERS: Some updates related to the SH4 machines
MAINTAINERS: Add some more MIPS related files
MAINTAINERS: Add usermode related config files
MAINTAINERS: Add some more pattern to recognize all win32 related files
MAINTAINERS: Add some more rocker related files
MAINTAINERS: Add header files to CRIS section
MAINTAINERS: Add some more files to the virtio section
MAINTAINERS: Add some SPARC machine related files
...
# Conflicts:
# MAINTAINERS
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1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=qmII
-----END PGP SIGNATURE-----
Merge remote-tracking branch 'remotes/armbru/tags/pull-qapi-2016-10-07' into staging
QAPI patches for 2016-10-07
# gpg: Signature made Fri 07 Oct 2016 18:55:40 BST
# gpg: using RSA key 0x3870B400EB918653
# gpg: Good signature from "Markus Armbruster <armbru@redhat.com>"
# gpg: aka "Markus Armbruster <armbru@pond.sub.org>"
# Primary key fingerprint: 354B C8B3 D7EB 2A6B 6867 4E5F 3870 B400 EB91 8653
* remotes/armbru/tags/pull-qapi-2016-10-07:
docs: Belatedly update for move of QMP/* to docs/
docs: Belatedly update for move of qmp-commands.txt
qmp: Disable query-cpu-* commands when they're unavailable
MAINTAINERS: Pass the QObject staff from Luiz to Markus
MAINTAINERS: Pass the HMP staff from Luiz to David
qapi: return a 'missing parameter' error
qapi: assert list entry has a value
qapi: add assert about root value
tests/test-qmp-input-strict: Cover missing struct members
qapi: Fix crash when 'any' or 'null' parameter is missing
qmp: fix object-add assert() without props
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
so it would be possible to verify _PXM generation in
DSDT and SRAT tables.
Signed-off-by: Igor Mammedov <imammedo@redhat.com>
Reviewed-by: Marcel Apfelbaum <marcel@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Commits 9ef8112a and efad6682 introduced new tests, but forgot
to ignore the built executables from an in-tree build.
Signed-off-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Alberto Garcia <berto@igalia.com>
Reviewed-by: Fam Zheng <famz@redhat.com>
Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
The 'old' dispatch code returned a QERR_MISSING_PARAMETER for missing
parameters, but the qapi qmp_dispatch() code uses
QERR_INVALID_PARAMETER_TYPE.
Improve qapi code to return QERR_MISSING_PARAMETER where
appropriate.
Fix expected error message in iotests.
Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Reviewed-by: Alberto Garcia <berto@igalia.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Message-Id: <20160930095948.3154-4-marcandre.lureau@redhat.com>
[Drop incorrect error_setg() from qmp_input_type_any() and
qmp_input_type_null()]
Reviewed-by: Markus Armbruster <armbru@redhat.com>
Signed-off-by: Markus Armbruster <armbru@redhat.com>
qht_lookup is meant to be called from an RCU read-critical
section. Make sure we're in such a section in test-qht
when performing lookups, despite the fact that no races
in qht can be triggered by test-qht since it is single-threaded.
Note that rcu_register_thread is already called by the
rcu_after_fork hook, and therefore duplicating it here would
be a bug.
Signed-off-by: Emilio G. Cota <cota@braap.org>
Message-Id: <1475706880-10667-4-git-send-email-cota@braap.org>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
These tests would have caught the bug fixed by the previous commit.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Message-Id: <1475594630-24758-1-git-send-email-armbru@redhat.com>
Currently accumulated target-ppc and spapr machine related patches.
- More POWER9 instruction implementations
- Additional test case / enabling of test cases for Power
- Assorted fixes
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v2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=YUU1
-----END PGP SIGNATURE-----
Merge remote-tracking branch 'remotes/dgibson/tags/ppc-for-2.8-20161006' into staging
ppc patch queue 2016-10-06
Currently accumulated target-ppc and spapr machine related patches.
- More POWER9 instruction implementations
- Additional test case / enabling of test cases for Power
- Assorted fixes
# gpg: Signature made Thu 06 Oct 2016 07:05:07 BST
# gpg: using RSA key 0x6C38CACA20D9B392
# gpg: Good signature from "David Gibson <david@gibson.dropbear.id.au>"
# gpg: aka "David Gibson (Red Hat) <dgibson@redhat.com>"
# gpg: aka "David Gibson (ozlabs.org) <dgibson@ozlabs.org>"
# gpg: aka "David Gibson (kernel.org) <dwg@kernel.org>"
# Primary key fingerprint: 75F4 6586 AE61 A66C C44E 87DC 6C38 CACA 20D9 B392
* remotes/dgibson/tags/ppc-for-2.8-20161006: (29 commits)
hw/ppc/spapr: Use POWER8 by default for the pseries-2.8 machine
tests/pxe: Use -nodefaults to speed up ppc64/ipv6 pxe test
spapr: fix check of cpu alias name in spapr_get_cpu_core_type()
tests: enable ohci/uhci/xhci tests on PPC64
libqos: use generic qtest_shutdown()
libqos: add PCI management in qtest_vboot()/qtest_shutdown()
libqos: add PPC64 PCI support
target-ppc: fix vmx instruction type/type2
target-ppc/kvm: Enable transactional memory on POWER8 with KVM-HV, too
target-ppc/kvm: Add a wrapper function to check for KVM-PR
MAINTAINERS: Add two more ppc related files
target-ppc: Implement mtvsrws instruction
target-ppc: add vclzlsbb/vctzlsbb instructions
target-ppc: add vector compare not equal instructions
target-ppc: fix invalid mask - cmpl, bctar
target-ppc: add stxvb16x instruction
target-ppc: add lxvb16x instruction
target-ppc: add stxvh8x instruction
target-ppc: add lxvh8x instruction
target-ppc: improve stxvw4x implementation
...
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
The quiet-command make rule currently takes two arguments:
the command and arguments to run, and a string to print if
the V flag is not set (ie we are not being verbose).
By convention, the string printed is of the form
" NAME some args". Unfortunately to get nicely lined up
output all the strings have to agree about what column the
arguments should start in, which means that if we add a
new quiet-command usage which wants a slightly longer CMD
name then we either put up with misalignment or change
every quiet-command string.
Split the quiet-mode string into two, the "NAME" and
the "same args" part, and use printf(1) to format the
string automatically. This means we only need to change
one place if we want to support a longer maximum name.
In particular, we can now print 7-character names lined
up properly (they are needed for the OSX "SETTOOL" invocation).
Change all the uses of quiet-command to the new syntax.
(Any which are missed or inadvertently reintroduced
via later merges will result in slightly misformatted
quiet output rather than disaster.)
A few places in the pc-bios/ makefiles are updated to use
"BUILD", "SIGN" and "STRIP" rather than "Building",
"Signing" and "Stripping" for consistency and to keep them
below 7 characters. Module .mo links now print "LD" rather
than the nonstandard "LD -r".
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Eric Blake <eblake@redhat.com>
Message-id: 1475598441-27908-1-git-send-email-peter.maydell@linaro.org
SLOF is unfortunately quite slow when running with TCG, so
the pxe test is also performing rather slow here. By using
"-nodefaults" we can disable some devices (vscsi) that we
are not interested in here, so that SLOF does not have to
scan them during boot and thus starts up a little bit faster.
The ppc64 pxe-test now only takes 27 seconds on my laptop
instead of 33 seconds.
The "-nodefaults" flag seems to work fine for the x86 tests,
too, so it is added here unconditionally here (though there
is no speed-up on x86 by using this flag).
Suggested-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Thomas Huth <thuth@redhat.com>
Reviewed-by: Laurent Vivier <lvivier@redhat.com>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
Machine specific shutdown function can be registered by
the machine specific qtest_XXX_boot() if needed.
So we will not have to test twice the architecture (on boot and on
shutdown) if the test can be run on several architectures.
Signed-off-by: Laurent Vivier <lvivier@redhat.com>
Reviewed-by: Greg Kurz <groug@kaod.org>
Reviewed-by: David Gibson <david@gibson.dropbear.id.au>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
Signed-off-by: Laurent Vivier <lvivier@redhat.com>
[dwg: Fixed build problem on 32-bit hosts]
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
The firmware of the pseries machine, SLOF, is able to load files via
IPv6 networking, too. So to test both, network bootloading on ppc64
and IPv6 (via Slirp) , let's add some PXE tests for this environment,
too. Since we can not use the normal x86 boot sector for network boot
loading, we use a simple Forth script on ppc64 instead.
Signed-off-by: Thomas Huth <thuth@redhat.com>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
Currently we configure and build under "$QEMU_SRC/tests/docker" which is
dubious. Create a fixed directory (to be friendly to ccache) and change
to there before calling build_qemu.
Signed-off-by: Fam Zheng <famz@redhat.com>
Message-Id: <1475047892-11955-1-git-send-email-famz@redhat.com>
The option whether or not to use a native AIO interface really isn't a
generic option for all drivers, but only applies to the native file
protocols. This patch moves the option in blockdev-add to the
appropriate places (raw-posix and raw-win32).
We still have to keep the flag BDRV_O_NATIVE_AIO for compatibility
because so far the AIO option was usually specified on the wrong layer
(the top-level format driver, which didn't even look at it) and then
inherited by the protocol driver (where it was actually used). We can't
forbid this use except in new interfaces.
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Max Reitz <mreitz@redhat.com>
The TODO comment has been addressed a while ago and this is now checked
in raw-posix, so we don't have to special case this in blockdev-add any
more.
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Max Reitz <mreitz@redhat.com>
"vq->desc[i].addr" is a 64bit value,
so write it with writeq(), not writew().
struct vring_desc {
__virtio64 addr;
__virtio32 len;
__virtio16 flags;
__virtio16 next;
};
Signed-off-by: Laurent Vivier <lvivier@redhat.com>
Message-id: 1474903450-9605-1-git-send-email-lvivier@redhat.com
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Add a test for the newly implemented ADDC instruction in the v17 CRIS
CPU.
Acked-by: Edgar E. Iglesias <edgar.iglesias@xilinx.com>
Signed-off-by: Rabin Vincent <rabinv@axis.com>
Signed-off-by: Edgar E. Iglesias <edgar.iglesias@xilinx.com>
This test, borrowed from the GDB simulator test suite, checks that every
syscall increments the time returned by gettimeofday() by exactly 1 ms.
This is not guaranteed or even desirable on QEMU so remove this test.
Reviewed-by: Edgar E. Iglesias <edgar.iglesias@xilinx.com>
Signed-off-by: Rabin Vincent <rabinv@axis.com>
Signed-off-by: Edgar E. Iglesias <edgar.iglesias@xilinx.com>
This test, borrowed from the GDB simulator test suite, is meant to test
the GDB simulator's --sysroot feature and always fails in QEMU. Remove
it. openpf3 tests the same sequence of system calls (without assuming
the precence of --sysroot).
Reviewed-by: Edgar E. Iglesias <edgar.iglesias@xilinx.com>
Signed-off-by: Rabin Vincent <rabinv@axis.com>
Signed-off-by: Edgar E. Iglesias <edgar.iglesias@xilinx.com>
Add the appropriate register constraints for the inline asm for the
write and exit system calls. Without the correct constraints for the
write() function, correct failure messages are not printed succesfully
on newer version of GCC.
Reviewed-by: Edgar E. Iglesias <edgar.iglesias@xilinx.com>
Reviewed-by: Richard Henderson <rth@twiddle.net>
Signed-off-by: Rabin Vincent <rabinv@axis.com>
Signed-off-by: Edgar E. Iglesias <edgar.iglesias@xilinx.com>
The CRIS tests expect that functions marked inline are always inline.
With newer versions of GCC, building them results warnings like the
following and spurious failures when they are run.
In file included from tests/tcg/cris/check_moveq.c:5:0:
tests/tcg/cris/crisutils.h:66:20: warning: inlining failed in call to
'cris_tst_cc.constprop.0': call is unlikely and code size would grow [-Winline]
tests/tcg/cris/check_moveq.c:28:13: warning: called from here [-Winline]
Use the always_inline attribute when building them to fix this.
Reviewed-by: Edgar E. Iglesias <edgar.iglesias@xilinx.com>
Signed-off-by: Rabin Vincent <rabinv@axis.com>
Signed-off-by: Edgar E. Iglesias <edgar.iglesias@xilinx.com>
SVM needs CPUID[0x8000000A] to be available. So if SVM is enabled
in a CPU model or explicitly in the command-line, adjust CPUID
xlevel to expose the CPUID[0x8000000A] leaf.
Reviewed-by: Richard Henderson <rth@twiddle.net>
Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
Instead of requiring users and management software to be aware of
required CPUID level/xlevel/xlevel2 values for each feature,
automatically increase those values when features need them.
This was already done for CPUID[7].EBX, and is now made generic
for all CPUID feature flags. Unit test included, to make sure we
don't break ABI on older machine-types and don't mess with the
CPUID level values if they are explicitly set by the user.
Reviewed-by: Richard Henderson <rth@twiddle.net>
Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
We're going to change the way level/xlevel/xlevel2 are handled
when enabling features, but we need to keep the old behavior on
existing machine types. Add test cases for that.
Reviewed-by: Richard Henderson <rth@twiddle.net>
Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
Add test code that will check if the automatic CPUID level
changes are working as expected.
Reviewed-by: Richard Henderson <rth@twiddle.net>
Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
Check that qemu disconnects the backend that doesn't have the previously
acked features.
Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
This test just checks that 2 virtio-net queues can be setup over
vhost-user and waits for them to be started.
Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Check early connection failure and resume.
Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v2.0.22 (GNU/Linux)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=JG9f
-----END PGP SIGNATURE-----
Merge remote-tracking branch 'remotes/kevin/tags/for-upstream' into staging
Block layer patches
# gpg: Signature made Fri 23 Sep 2016 12:59:46 BST
# gpg: using RSA key 0x7F09B272C88F2FD6
# gpg: Good signature from "Kevin Wolf <kwolf@redhat.com>"
# Primary key fingerprint: DC3D EB15 9A9A F95D 3D74 56FE 7F09 B272 C88F 2FD6
* remotes/kevin/tags/for-upstream: (33 commits)
block: Remove BB interface from blockdev-add/del
qemu-iotests/141: Avoid blockdev-add with id
block: Avoid printing NULL string in error messages
qemu-iotests/139: Avoid blockdev-add with id
qemu-iotests/124: Avoid blockdev-add with id
qemu-iotests/118: Avoid blockdev-add with id
qemu-iotests/117: Avoid blockdev-add with id
qemu-iotests/087: Avoid blockdev-add with id
qemu-iotests/081: Avoid blockdev-add with id
qemu-iotests/071: Avoid blockdev-add with id
qemu-iotests/067: Avoid blockdev-add with id
qemu-iotests/041: Avoid blockdev-add with id
qemu-iotests/118: Test media change with qdev name
block: Accept device model name for block_set_io_throttle
block: Accept device model name for blockdev-change-medium
block: Accept device model name for eject
block: Accept device model name for x-blockdev-remove-medium
block: Accept device model name for x-blockdev-insert-medium
block: Accept device model name for blockdev-open/close-tray
qdev-monitor: Add blk_by_qdev_id()
...
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
This pull request supersedes ppc-for-2.8-20160922. There was a clang
build error in that, and I've also added one extra patch in the new pull.
Included in this set of ppc and spapr patches are:
* TCG implementations for more POWER9 instructions
* Some preliminary XICS fixes in preparataion for the pnv machine type
* A significant ADB (Macintosh kbd/mouse) cleanup
* Some conversions to use trace instead of debug macros
* Fixes to correctly handle global TLB flush synchronization in
TCG. This is already a bug, but it will have much more impact
when we get MTTCG
* Add more qtest testcases for Power
* Some MAINTAINERS updates
* Assorted bugfixes
* Add the basics of NUMA associativity to the spapr PCI host bridge
This touches some test files and monitor.c which are technically
outside the ppc code, but coming through this tree because the changes
are primarily of interest to ppc.
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v2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=et1C
-----END PGP SIGNATURE-----
Merge remote-tracking branch 'remotes/dgibson/tags/ppc-for-2.8-20160923' into staging
ppc patch queue 2016-09-23
This pull request supersedes ppc-for-2.8-20160922. There was a clang
build error in that, and I've also added one extra patch in the new pull.
Included in this set of ppc and spapr patches are:
* TCG implementations for more POWER9 instructions
* Some preliminary XICS fixes in preparataion for the pnv machine type
* A significant ADB (Macintosh kbd/mouse) cleanup
* Some conversions to use trace instead of debug macros
* Fixes to correctly handle global TLB flush synchronization in
TCG. This is already a bug, but it will have much more impact
when we get MTTCG
* Add more qtest testcases for Power
* Some MAINTAINERS updates
* Assorted bugfixes
* Add the basics of NUMA associativity to the spapr PCI host bridge
This touches some test files and monitor.c which are technically
outside the ppc code, but coming through this tree because the changes
are primarily of interest to ppc.
# gpg: Signature made Fri 23 Sep 2016 08:14:47 BST
# gpg: using RSA key 0x6C38CACA20D9B392
# gpg: Good signature from "David Gibson <david@gibson.dropbear.id.au>"
# gpg: aka "David Gibson (Red Hat) <dgibson@redhat.com>"
# gpg: aka "David Gibson (ozlabs.org) <dgibson@ozlabs.org>"
# gpg: aka "David Gibson (kernel.org) <dwg@kernel.org>"
# Primary key fingerprint: 75F4 6586 AE61 A66C C44E 87DC 6C38 CACA 20D9 B392
* remotes/dgibson/tags/ppc-for-2.8-20160923: (45 commits)
spapr_pci: Add numa node id
monitor: fix crash for platforms without a CPU 0
linux-user: ppc64: fix ARCH_206 bit in AT_HWCAP
ppc/kvm: Mark 64kB page size support as disabled if not available
ppc/xics: An ICS with offset 0 is assumed to be uninitialized
ppc/xics: account correct irq status
Enable H_CLEAR_MOD and H_CLEAR_REF hypercalls on KVM/PPC64.
target-ppc: tlbie/tlbivax should have global effect
target-ppc: add flag in check_tlb_flush()
target-ppc: add TLB_NEED_LOCAL_FLUSH flag
spapr: Introduce sPAPRCPUCoreClass
target-ppc: implement darn instruction
target-ppc: add stxsi[bh]x instruction
target-ppc: add lxsi[bw]zx instruction
target-ppc: add xxspltib instruction
target-ppc: consolidate store conditional
target-ppc: move out stqcx impementation
target-ppc: consolidate load with reservation
target-ppc: convert st[16,32,64]r to use new macro
target-ppc: convert st64 to use new macro
...
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Version: GnuPG v2
iQEcBAABCAAGBQJX5LZ0AAoJEMo1YkxqkXHGmgAIAKeDTKx0sA76ewIvH9fKdmUu
NNatJw59XnVX8lpfOU5yISkJ4BD6oBdN7tbWaOW8yzcAeYu1Ff5iUu4LBEUFb7eW
g6zqUCV58XjaCTLmTiAfa19Exfnh6pXZlZMRP4Hr3vUVSCHFmC0EyTEllfHxU/jW
aPHtAEge/p6EDAHygHJBTSQzsaXRdyJNyt/AKPreDtblNRT8VgapCDzZQPcCVGH1
F9grWVu0B/VVDS0mfgSRhT0UeF/vtiikuRW92sC4woVVB+brJyG4VwGT8oeUN8RU
30/tGo5p9fpqef3iP669uUrloLfmWcKcIJuPfQ4ZUlZh8kIV+lWK9kZuTVgocGw=
=xLJw
-----END PGP SIGNATURE-----
Merge remote-tracking branch 'remotes/famz/tags/various-pull-request' into staging
# gpg: Signature made Fri 23 Sep 2016 05:58:28 BST
# gpg: using RSA key 0xCA35624C6A9171C6
# gpg: Good signature from "Fam Zheng <famz@redhat.com>"
# gpg: WARNING: This key is not certified with a trusted signature!
# gpg: There is no indication that the signature belongs to the owner.
# Primary key fingerprint: 5003 7CB7 9706 0F76 F021 AD56 CA35 624C 6A91 71C6
* remotes/famz/tags/various-pull-request: (23 commits)
docker: exec $CMD
docker: Terminate instances at SIGTERM and SIGHUP
docker: Support showing environment information
docker: Print used options before doing configure
docker: Flatten default target list in test-quick
docker: Update fedora image to latest
docker: Generate /packages.txt in ubuntu image
docker: Generate /packages.txt in fedora image
docker: Generate /packages.txt in centos6 image
tests: Ignore test-uuid
Add UUID files to MAINTAINERS
tests: Add uuid tests
uuid: Tighten uuid parse
vl: Switch qemu_uuid to QemuUUID
configure: Remove detection code for UUID
tests: No longer dependent on CONFIG_UUID
crypto: Switch to QEMU UUID API
vpc: Use QEMU UUID API
vdi: Use QEMU UUID API
vhdx: Use QEMU UUID API
...
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
# Conflicts:
# tests/Makefile.include
With this patch, blockdev-add always works on a node level, i.e. it
creates a BDS, but no BB. Consequently, x-blockdev-del doesn't need the
'device' option any more, but 'node-name' becomes mandatory.
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
We want to remove the 'id' option for blockdev-add. This removes one
user of the option and makes it use only node names.
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Even for nodes that have a BlockBackend attached, bdrv_get_parent_name()
can return NULL if the BB is anonymous (e.g. it belongs to a block job
or a device that was created with a drive=<node-name> option).
Remove the information from the error message. The user probably knows
already why the node is still in use.
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
We want to remove the 'id' option for blockdev-add. This removes one
user of the option and makes it use only node names.
Some test cases that used to work with an unattached BlockBackend are
removed, either because they don't make sense with an attached device or
because the equivalent test case with an attached device already exists.
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
We want to remove the 'id' option for blockdev-add. This removes one
user of the option and makes it use only node names.
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
We want to remove the 'id' option for blockdev-add. This removes one
user of the option and makes it use only node names.
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>