listflags() had lots of unnecessary complexity. Instead of printing to a
buffer that will be immediately printed, simply call the printing
function directly. Also, remove the fbits and flags arguments that were
always set to the same value. Also, there's no need to list the flags in
reverse order.
Reviewed-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
All Haswell CPUs and some Broadwell CPUs were updated by Intel to have
the HLE and RTM features disabled. This will prevent
"-cpu Haswell,enforce" and "-cpu Broadwell,enforce" from running out of
the box on those CPUs.
Disable those features by default on Broadwell and Haswell CPU models,
starting on pc-*-2.3. Users who want to use those features can enable
them explicitly on the command-line.
Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Both were added in Ivy Bridge (for which we do not have a CPU model
yet!).
Reviewed-by: Eduardo Habkost <ehabkost@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
vm86 mode extensions date back to the 486. All models should have
them.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Add xsaves related definition, it also adds corresponding part
to kvm_get/put, and vmstate.
Signed-off-by: Wanpeng Li <wanpeng.li@linux.intel.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
These represent xsave-related capabilities of the processor, and KVM may
or may not support them.
Add feature bits so that they are considered by "-cpu ...,enforce", and use
the new feature work instead of calling kvm_arch_get_supported_cpuid.
Bit 3 (XSAVES) is not migratables because it requires saving MSR_IA32_XSS.
Neither KVM nor any commonly available hardware supports it anyway.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
After the next patch, if a masked PIC interrupts causes CPU_INTERRUPT_POLL
to be set, the CPU will spuriously get out of halted state. While this
is technically valid, we should avoid that.
Make CPU_INTERRUPT_POLL run apic_update_irq in the right thread and then
look at CPU_INTERRUPT_HARD. If CPU_INTERRUPT_HARD does not get set,
do not report the CPU as having work.
Also move the handling of software-disabled APIC from apic_update_irq
to apic_irq_pending, and always trigger CPU_INTERRUPT_POLL. This will
be important once we will add a case that resets CPU_INTERRUPT_HARD
from apic_update_irq. We want to run it even if we go through
CPU_INTERRUPT_POLL, and even if the local APIC is software disabled.
Reported-by: Richard Bilson <rbilson@qnx.com>
Tested-by: Richard Bilson <rbilson@qnx.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1.4.12 (GNU/Linux)
iQEcBAABAgAGBQJUYh9vAAoJEL7lnXSkw9fbgPQH/065L5+SpaJR1Nte9Lz3N2s1
a6tGSI22yu85tKvYCdYjeoVHSkSTyR57FdTfUd2xc2QPj+J4sWXpA81KILBGTJUp
NMpmLpWg4LOh8Ek4ViRgmFFdryzIFa4dT4gc1AcSAIAQ6jsgK1dM7m5kfncC3TN0
TUs248vJ2i/DaE0k8TOeJqxJTqInoFttlJEqG7RD+V5JznokE4zpFNXHDGx9BptE
W2J38GJ/TKRPe9UrHMKZI1r6+ZBdXyE/CaqsNNKLJdqrHgSQuAyK/PS6dQbM4BLg
M1qdP7Tp0wOlvv9qoEZMOEiUsi54XPqLgaLMbW74Yp5X459fqmLW2imy49pHXt8=
=klsW
-----END PGP SIGNATURE-----
Merge remote-tracking branch 'remotes/mjt/tags/pull-trivial-patches-2014-11-11' into staging
trivial patches for 2014-11-11
# gpg: Signature made Tue 11 Nov 2014 14:38:39 GMT using RSA key ID A4C3D7DB
# gpg: Good signature from "Michael Tokarev <mjt@tls.msk.ru>"
# gpg: aka "Michael Tokarev <mjt@corpit.ru>"
# gpg: aka "Michael Tokarev <mjt@debian.org>"
* remotes/mjt/tags/pull-trivial-patches-2014-11-11:
block: Fix comment for bdrv_co_get_block_status
sysbus: Correct SYSTEM_BUS(obj) defines
target-i386: cpu: keeping function parameters alignment on new line
xen-hvm: Remove redundant variable 'xstate'
coroutine-sigaltstack: Change jmp_buf to sigjmp_buf
pc-bios: petalogix-s3adsp1800.dtb: Use 'xlnx, xps-ethernetlite-2.00.a' instead of 'xlnx, xps-ethernetlite-2.00.b'
gdbstub: Add a missing case of signal number translation in gdbstub
numa: make 'info numa' take into account hotplugged memory
slirp/smbd: modify/set several parameters in generated smbd.conf
qemu-doc.texi: fix typos in x509 examples
icc_bus: fix typo ICC_BRIGDE -> ICC_BRIDGE
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Make SVM be disabled by default on all CPU models when in KVM mode.
Nested SVM is enabled by default in the KVM kernel module, but it is
probably less stable than nested VMX (which is already disabled by
default).
Add a new compat function, x86_cpu_compat_kvm_no_autodisable(), to keep
compatibility on previous machine-types.
Suggested-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
Signed-off-by: Andreas Färber <afaerber@suse.de>
TCG doesn't support VMX, and nested VMX is not enabled by default in the
KVM kernel module.
So, there's no reason to have VMX enabled by default on the core2duo and
coreduo CPU models, today. Even the newer Intel CPU model definitions
don't have it enabled.
In this case, we need machine-type compat code, as people may be running
the older machine-types on hosts that had VMX nesting enabled.
Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
Signed-off-by: Andreas Färber <afaerber@suse.de>
The following CPU features were never supported by neither TCG or KVM,
so they are useless on the CPU model definitions, today:
* CPUID_DTS (DS)
* CPUID_HT
* CPUID_TM
* CPUID_PBE
* CPUID_EXT_DTES64
* CPUID_EXT_DSCPL
* CPUID_EXT_EST
* CPUID_EXT_TM2
* CPUID_EXT_XTPR
* CPUID_EXT_PDCM
* CPUID_SVM_LBRV
As using "enforce" mode is the only way to ensure guest ABI doesn't
change when moving to a different host, we should make "enforce" mode
the default or at least encourage management software to always use it.
In turn, to make "enforce" usable, we need CPU models that work without
always requiring some features to be explicitly disabled. This patch
removes the above features from all CPU model definitions.
We won't need any machine-type compat code for those changes, because it
is impossible to have existing VMs with those features enabled.
Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
Cc: Aurelien Jarno <aurelien@aurel32.net>
Signed-off-by: Andreas Färber <afaerber@suse.de>
KVM never supported the CPUID_ACPI flag, so it doesn't make sense to
have it enabled by default when KVM is enabled.
The motivation here is exactly the same we had for the MONITOR flag
(disabled by commit 136a7e9a85).
And like in the MONITOR flag case, we don't need machine-type compat code
because it is currently impossible to run a KVM VM with the ACPI flag set.
Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
Signed-off-by: Andreas Färber <afaerber@suse.de>
The x86_cpu_compat_disable_kvm_features() name was a bit confusing, as
it won't forcibly disable the feature for all CPU models (i.e. add it to
kvm_default_unset_features), but it will instead turn off the KVM
auto-enabling of the feature (i.e. remove it from kvm_default_features),
meaning the feature may still be enabled by default in some CPU models).
Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
Signed-off-by: Andreas Färber <afaerber@suse.de>
The struct is not used anymore and can be removed.
Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
Reviewed-by: Igor Mammedov <imammedo@redhat.com>
Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
Only Intel CPUs support hyperthreading. When users select threads>1 in
-smp option, QEMU fixes it by adjusting CPUID_0000_0001_EBX and
CPUID_8000_0008_ECX based on inputs (sockets, cores, threads);
so guest VM can boot correctly. However it is still better to gives
users a warning when such case happens.
Signed-off-by: Wei Huang <wei@redhat.com>
[As suggested by Eduardo, check for !IS_INTEL instead of AMD. - Paolo]
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
kvmclock fix. This was reverted last minute for 2.1, but it is now back
with the problematic case fixed.
Note: I will soon switch to a subkey for signing purposes. To verify
future signed pull requests from me, please update my key with
"gpg --recv-keys 9B4D86F2". You should see 3 new subkeys---the
one for signing will be a 2048-bit RSA key, 4E6B09D7.
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v2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=nP/e
-----END PGP SIGNATURE-----
Merge remote-tracking branch 'remotes/bonzini/tags/for-upstream' into staging
Usual mix of patches, the most important being Alex and Marcelo's
kvmclock fix. This was reverted last minute for 2.1, but it is now back
with the problematic case fixed.
Note: I will soon switch to a subkey for signing purposes. To verify
future signed pull requests from me, please update my key with
"gpg --recv-keys 9B4D86F2". You should see 3 new subkeys---the
one for signing will be a 2048-bit RSA key, 4E6B09D7.
# gpg: Signature made Fri 26 Sep 2014 15:34:44 BST using RSA key ID 9B4D86F2
# gpg: Good signature from "Paolo Bonzini <pbonzini@redhat.com>"
# gpg: aka "Paolo Bonzini <bonzini@gnu.org>"
* remotes/bonzini/tags/for-upstream:
kvm/valgrind: don't mark memory as initialized
po: fix conflict with %.mo rule in rules.mak
kvmvapic: fix migration when VM paused and when not running Windows
serial: check if backed by a physical serial port at realize time
serial: reset state at startup
target-i386: update fp status fix
hw/dma/i8257: Silence phony error message
kvmclock: Ensure time in migration never goes backward
kvmclock: Ensure proper env->tsc value for kvmclock_current_nsec calculation
Introduce cpu_clean_all_dirty
pit: fix pit interrupt can't inject into vm after migration
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Note that the code that was within the "exit" ifdef block
was identical to the cpu_compute_eflags inline, so make that
simplification at the same time.
Signed-off-by: Richard Henderson <rth@twiddle.net>
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Message-id: 1410626734-3804-4-git-send-email-rth@twiddle.net
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
This patch introduces cpu_set_fpuc() function, which changes fpuc field
of the CPU state and calls update_fp_status() function.
These calls update status of softfloat library and prevent bugs caused
by non-coherent rounding settings of the FPU and softfloat.
v2 changes:
* Added missed calls and intoduced setter function (as suggested by TeLeMan)
Reviewed-by: TeLeMan <geleman@gmail.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Pavel Dovgalyuk <Pavel.Dovgaluk@ispras.ru>
Instead of simply printing a warning, report an error when invalid CPU
options are provided on the CPU model string.
Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
Reviewed-by: Igor Mammedov <imammedo@redhat.com>
Signed-off-by: Andreas Färber <afaerber@suse.de>
When the "migratable" property was implemented, the behavior was tested
by changing the default on the code, but actually using the option on
the command-line (e.g. "-cpu host,migratable=false") doesn't work as
expected. This is a regression for a common use case of "-cpu host",
which is to enable features that are supported by the host CPU + kernel
before feature-specific code is added to QEMU.
Fix this by initializing the feature words for "-cpu host" on
x86_cpu_parse_featurestr(), right after parsing the CPU options.
Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
Reviewed-by: Michael Roth <mdroth@linux.vnet.ibm.com>
Cc: qemu-stable@nongnu.org
Signed-off-by: Andreas Färber <afaerber@suse.de>
tsc_adjust migration support is already implemented (commit
f28558d3d3), so we can add it to the list
of known feature names.
Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Migration support for MPX is already implemented (commit
79e9ebebbf), so we can add it to the list
of known feature names.
Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
The SDM specifies (June 2014 Vol3 11.11.5):
On a hardware reset, the P6 and more recent processors clear the
valid flags in variable-range MTRRs and clear the E flag in the
IA32_MTRR_DEF_TYPE MSR to disable all MTRRs. All other bits in the
MTRRs are undefined.
We currently do none of that, so whatever MTRR settings you had prior
to reset is what you have after reset. Usually this doesn't matter
because KVM often ignores the guest mappings and uses write-back
anyway. However, if you have an assigned device and an IOMMU that
allows NoSnoop for that device, KVM defers to the guest memory
mappings which are now stale after reset. The result is that OVMF
rebooting on such a configuration takes a full minute to LZMA
decompress the firmware volume, a process that is nearly instant on
the initial boot.
Signed-off-by: Alex Williamson <alex.williamson@redhat.com>
Reviewed-by: Laszlo Ersek <lersek@redhat.com>
Cc: qemu-stable@nongnu.org
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Chen Fan <chen.fan.fnst@cn.fujitsu.com>
Reviewed-by: Igor Mammedov <imammedo@redhat.com>
Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
KVM_FEATURE_CLOCKSOURCE_STABLE_BIT is enabled by default and supported
by KVM. But not having a name defined makes QEMU treat it as an unknown
and unmigratable feature flag (as any unknown feature may possibly
require state to be migrated), and disable it by default on "-cpu host".
As a side-effect, the new name also makes the flag configurable,
allowing the user to disable it (which may be useful for testing or for
compatibility with old kernels).
Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
This adds a new CPU model named "Broadwell". It has all the features
from Haswell, plus PREFETCHW, RDSEED, ADX, SMAP.
PREFETCHW was already supported as "3dnowprefetch".
RDSEED, ADX was added on Linux v3.15-rc1.
SMAP was added on Linux v3.15-rc2.
Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
Cc: Wang, Yong Y <yong.y.wang@intel.com>
Cc: Paolo Bonzini <pbonzini@redhat.com>
Cc: Dugger, Donald D <donald.d.dugger@intel.com>
Signed-off-by: Andreas Färber <afaerber@suse.de>
Expose "Invariant TSC" flag, if KVM is enabled. From Intel documentation:
17.13.1 Invariant TSC The time stamp counter in newer processors may
support an enhancement, referred to as invariant TSC. Processor’s
support for invariant TSC is indicated by CPUID.80000007H:EDX[8].
The invariant TSC will run at a constant rate in all ACPI P-, C-.
and T-states. This is the architectural behavior moving forward. On
processors with invariant TSC support, the OS may use the TSC for wall
clock timer services (instead of ACPI or HPET timers). TSC reads are
much more efficient and do not incur the overhead associated with a ring
transition or access to a platform resource.
Signed-off-by: Marcelo Tosatti <mtosatti@redhat.com>
[ehabkost: redo feature filtering to use .tcg_features]
[ehabkost: add CPUID_APM_INVTSC macro, add it to .unmigratable_flags]
Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
Signed-off-by: Andreas Färber <afaerber@suse.de>
Having only migratable flags reported by default on the "host" CPU model
is safer for the following reasons:
* Existing users may expect "-cpu host" to be migration-safe, if they
take care of always using compatible host CPUs, host kernels, and
QEMU versions.
* Users who don't care aboug migration and want to enable all features
supported by the host kernel can simply change their setup to use
migratable=no.
Without this change, people using "-cpu host" will stop being able to
migrate, because now "invtsc" is getting enabled by default.
We are not setting migratable=yes by default on all X86CPU subclasses,
because users should be able to get non-migratable features enabled if
they ask for them explicitly.
Reviewed-by: Marcelo Tosatti <mtosatti@redhat.com>
Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
Signed-off-by: Andreas Färber <afaerber@suse.de>
This flag will allow the user to choose between two modes:
* All flags that can be enabled on the host, even if unmigratable
(migratable=no);
* All flags that can be enabled on the host, are known to QEMU
and migratable (migratable=yes).
The default is still migratable=false, to keep current behavior, but
this will be changed to migratable=true by another patch.
My plan was to support the "migratable" flag on all CPU classes, but
have the default to "false" on all CPU models except "host". However,
DeviceClass has no mechanism to allow a child class to have a different
property default from the parent class yet, so by now only the "host"
CPU model will support the "migratable" flag.
Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
Signed-off-by: Andreas Färber <afaerber@suse.de>
If enforce/check is specified in TCG mode, QEMU will ensure all CPU
features are supported by TCG, so no CPU feature is silently disabled.
Reviewed-by: Richard Henderson <rth@twiddle.net>
Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
[AF: Be explicit about TCG vs. !KVM]
Signed-off-by: Andreas Färber <afaerber@suse.de>
Instead of manually filtering each feature word, add a tcg_features
field to FeatureWordInfo, and use that field to filter all feature words
in TCG mode.
Reviewed-by: Richard Henderson <rth@twiddle.net>
Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
Signed-off-by: Andreas Färber <afaerber@suse.de>
Now that we have the feature word arrays, we don't need to manually copy
each array item, we can simply iterate through each feature word.
Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
Signed-off-by: Andreas Färber <afaerber@suse.de>
Those macros will be used in the feature_word_info array data, so need
to be defined earlier.
Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
Signed-off-by: Andreas Färber <afaerber@suse.de>
TCG doesn't support any of the feature flags on FEAT_KVM and
FEAT_C000_0001_EDX feature words, so clear all bits on those feature
words.
Reviewed-by: Richard Henderson <rth@twiddle.net>
Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
Signed-off-by: Andreas Färber <afaerber@suse.de>
The TCG_7_0_EBX_FEATURES macro was defined but never used (it even had a
typo that was never noticed). Make the existing TCG feature filtering
code use it.
Reviewed-by: Richard Henderson <rth@twiddle.net>
Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
Cc: qemu-stable@nongnu.org
Signed-off-by: Andreas Färber <afaerber@suse.de>
Instead of an #ifdef in the middle of the code, just set
TCG_EXT2_FEATURES to a different value depending on TARGET_X86_64.
Reviewed-by: Richard Henderson <rth@twiddle.net>
Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
Signed-off-by: Andreas Färber <afaerber@suse.de>
This will allow us to re-use the feature filtering logic (and the
check/enforce flag logic) for TCG.
Reviewed-by: Richard Henderson <rth@twiddle.net>
Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
Signed-off-by: Andreas Färber <afaerber@suse.de>
This will help us simplify the code that calls
report_unavailable_features() later.
Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
Signed-off-by: Andreas Färber <afaerber@suse.de>
Merge filter_features_for_kvm() and kvm_check_features_against_host().
Both functions made exactly the same calculations, the only difference
was that filter_features_for_kvm() changed the bits on cpu->features[],
and kvm_check_features_against_host() did error reporting.
Reviewed-by: Richard Henderson <rth@twiddle.net>
Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
Signed-off-by: Andreas Färber <afaerber@suse.de>
Instead of checking and calling unavailable_host_feature() once for each
bit, simply call the function (now renamed to
report_unavailable_features()) once for each feature word.
Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
[AF: Drop unused return value]
Signed-off-by: Andreas Färber <afaerber@suse.de>
KVM never supported the MONITOR flag so it doesn't make sense to have it
enabled by default when KVM is enabled.
The rationale here is similar to the cases where it makes sense to have
a feature enabled by default on all CPU models when on KVM mode (e.g.
x2apic). In this case we are having a feature disabled by default for
the same reasons.
In this case we don't need machine-type compat code because it is
currently impossible to run a KVM VM with the MONITOR flag set.
Reviewed-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
Signed-off-by: Andreas Färber <afaerber@suse.de>
Because of the "goto out", the contents of local_err are leaked
and lost.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
* remotes/bonzini/softmmu-smap: (33 commits)
target-i386: cleanup x86_cpu_get_phys_page_debug
target-i386: fix protection bits in the TLB for SMEP
target-i386: support long addresses for 4MB pages (PSE-36)
target-i386: raise page fault for reserved bits in large pages
target-i386: unify reserved bits and NX bit check
target-i386: simplify pte/vaddr calculation
target-i386: raise page fault for reserved physical address bits
target-i386: test reserved PS bit on PML4Es
target-i386: set correct error code for reserved bit access
target-i386: introduce support for 1 GB pages
target-i386: introduce do_check_protect label
target-i386: tweak handling of PG_NX_MASK
target-i386: commonize checks for PAE and non-PAE
target-i386: commonize checks for 4MB and 4KB pages
target-i386: commonize checks for 2MB and 4KB pages
target-i386: fix coding standards in x86_cpu_handle_mmu_fault
target-i386: simplify SMAP handling in MMU_KSMAP_IDX
target-i386: fix kernel accesses with SMAP and CPL = 3
target-i386: move check_io helpers to seg_helper.c
target-i386: rename KSMAP to KNOSMAP
...
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
4MB pages can use 40-bit addresses by putting the higher 8 bits in bits
20-13 of the PDE. Bit 21 is reserved.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
The latest Nvidia driver (337.88) specifically checks for KVM as the
hypervisor and reports Code 43 for the driver in a Windows guest when
found. Removing or changing the KVM signature is sufficient for the
driver to load and work. This patch adds an option to easily allow
the KVM hypervisor signature to be hidden using '-cpu kvm=off'. We
continue to expose KVM via the cpuid value by default. The state of
this option does not supercede or replace -enable-kvm or the accel=kvm
machine option. This only changes the visibility of KVM to the guest
and paravirtual features specifically tied to the KVM cpuid.
Signed-off-by: Alex Williamson <alex.williamson@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Most MSRs, plus the FPU, MMX, MXCSR, XMM and YMM registers should not
be zeroed on INIT (Table 9-1 in the Intel SDM). Copy them out of
CPUX86State and back in, instead of special casing env->pat.
The relevant fields are already consecutive except PAT and SMBASE.
However:
- KVM and Hyper-V MSRs should be reset because they include memory
locations written by the hypervisor. These MSRs are moved together
at the end of the preserved area.
- SVM state can be moved out of the way since it is written by VMRUN.
Cc: Andreas Faerber <afaerber@suse.de>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
BND0-3, BNDCFGU, BNDCFGS, BNDSTATUS were not zeroed on reset, but they
should be (Intel Instruction Set Extensions Programming Reference
319433-015, pages 9-4 and 9-6). Same for YMM.
XCR0 should be reset to 1.
TSC and TSC_RESET were zeroed already by the memset, remove the explicit
assignments.
Cc: Andreas Faerber <afaerber@suse.de>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Now that we have a CPU object with a reset method, it is better to
keep the KVM reset close to the CPU reset. Using qemu_register_reset
as we do now keeps them far apart.
With this patch, PPC no longer calls the kvm_arch_ function, so
it can get removed there. Other arches call it from their CPU
reset handler, and the function gets an ARMCPU/X86CPU/S390CPU.
Note that ARM- and s390-specific functions are called kvm_arm_*
and kvm_s390_*, while x86-specific functions are called kvm_arch_*.
That follows the convention used by the different architectures.
Changing that is the topic of a separate patch.
Reviewed-by: Gleb Natapov <gnatapov@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Using error_is_set(ERRP) to find out whether a function failed is
either wrong, fragile, or unnecessarily opaque. It's wrong when ERRP
may be null, because errors go undetected when it is. It's fragile
when proving ERRP non-null involves a non-local argument. Else, it's
unnecessarily opaque (see commit 84d18f0).
I guess the error_is_set(errp) in the ObjectProperty set() methods are
merely fragile right now, because I can't find a call chain that
passes a null errp argument.
Make the code more robust and more obviously correct: receive the
error in a local variable, then propagate it through the parameter.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Signed-off-by: Andreas Färber <afaerber@suse.de>
This fixes warnings from the static code analysis (smatch).
Signed-off-by: Stefan Weil <sw@weilnetz.de>
Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
Most targets were using offsetof(CPUFooState, breakpoints) to determine
how much of CPUFooState to clear on reset. Use the next field after
CPU_COMMON instead, if any, or sizeof(CPUFooState) otherwise.
Signed-off-by: Andreas Färber <afaerber@suse.de>
Note that while such functions may exist both for *-user and softmmu,
only *-user uses the CPUState hook, while softmmu reuses the prototype
for calling it directly.
Signed-off-by: Andreas Färber <afaerber@suse.de>
Adapt the X86CPU implementation to suit the generic hook.
This involves a cleanup of error handling to cope with NULL errp.
Reviewed-by: Igor Mammedov <imammedo@redhat.com>
Signed-off-by: Andreas Färber <afaerber@suse.de>
Register separate QOM types for each x86 CPU model.
This will allow management code to more easily probe what each CPU model
provides, by simply creating objects using the appropriate class name,
without having to restart QEMU.
This also allows us to eliminate the qdev_prop_set_globals_for_type()
hack to set CPU-model-specific global properties.
Instead of creating separate class_init functions for each class, I just
used class_data to store a pointer to the X86CPUDefinition struct for
each CPU model. This should make the patch shorter and easier to review.
Later we can gradually convert each X86CPUDefinition field to lists of
per-class property defaults.
The "host" CPU model is special, as the feature flags depend on KVM
being initialized. So it has its own class_init and instance_init
function, and feature flags are set on instance_init instead of
class_init.
Signed-off-by: Andreas Färber <afaerber@suse.de>
Signed-off-by: Igor Mammedov <imammedo@redhat.com>
Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
Reviewed-by: Eduardo Habkost <ehabkost@redhat.com>
Tested-by: Eduardo Habkost <ehabkost@redhat.com>
[AF: Limit the host CPU type to CONFIG_KVM as build fix]
Signed-off-by: Andreas Färber <afaerber@suse.de>
When on KVM mode, enable x2apic by default on all CPU models.
Normally we try to keep the CPU model definitions as close as the real
CPUs as possible, but x2apic can be emulated by KVM without host CPU
support for x2apic, and it improves performance by reducing APIC access
overhead. x2apic emulation is available on KVM since 2009 (Linux
2.6.32-rc1), there's no reason for not enabling x2apic by default when
running KVM.
Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
Acked-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Andreas Färber <afaerber@suse.de>
Instead of the feature-specific disable_kvm_pv_eoi() function, create a
more general function that can be used to disable other feature bits in
machine-type compat code.
Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
Acked-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Andreas Färber <afaerber@suse.de>
We will later make the KVM-specific code affect other feature words,
too.
Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
Acked-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Andreas Färber <afaerber@suse.de>
Some of my recent changes introduced variable declarations in the middle
of code blocks.
Fix the code so that it compiles without warnings when using
-Wdeclaration-after-statement.
Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
Signed-off-by: Andreas Färber <afaerber@suse.de>
As the new X86CPU subclass code is going to change lots of the code
invoving x86_def_t, let's rename the struct to match coding style first.
Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
Reviewed-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Andreas Färber <afaerber@suse.de>
As we will initialize the X86CPU fields on instance_init eventually,
move the code that initializes the X86CPU data based on the CPU model
name closer to the object_new() call.
Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
Signed-off-by: Andreas Färber <afaerber@suse.de>
There isn't any kind of "registration" involved in cpu_x86_register()
anymore: it is simply looking up a CPU model name and loading the model
definition data into the X86CPU object. Rename it to x86_cpu_load_def()
to reflect what it does.
Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
Reviewed-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Andreas Färber <afaerber@suse.de>
Default to false.
Tidy variable naming and inline cast uses while at it.
Tested-by: Jia Liu <proljc@gmail.com> (or32)
Signed-off-by: Andreas Färber <afaerber@suse.de>
* remotes/qmp-unstable/queue/qmp:
tests: test-qmp-commands: Fix double free
qapi script: do not add "_" for every capitalized char in enum
qapi script: do not allow string discriminator
qapi: convert BlockdevOptions to use enum discriminator
qapi script: support enum type as discriminator in union
qapi script: use same function to generate enum string
qapi script: code move for generate_enum_name()
qapi script: check correctness of union
qapi script: remember line number in schema parsing
qapi script: add check for duplicated key
qapi script: remember explicitly defined enum values
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Now "enum AIOContext" will generate AIO_CONTEXT instead of A_I_O_CONTEXT,
"X86CPU" will generate X86_CPU instead of X86_C_P_U.
Signed-off-by: Wenchao Xia <wenchaoqemu@gmail.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Markus Armbruster <armbru@redhat.com>
Signed-off-by: Luiz Capitulino <lcapitulino@redhat.com>
The correct size of cpuid 0x0d sub-leaf 4 is 0x40, not 0x10.
This is confirmed by Anvin H Peter and Mallick Asit K.
Signed-off-by: Liu Jinsong <jinsong.liu@intel.com>
Cc: H. Peter Anvin <hpa@zytor.com>
Cc: Asit K Mallick <asit.k.mallick@intel.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Liu, Jinsong <jinsong.liu@intel.com>
As we will not have a cpu_x86_find_by_name() function anymore,
move the KVM default-vendor hack to instance_init.
Unfortunately we can't move that code to class_init because it depends
on KVM being initialized.
Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
As eventually the x86_def_t data is going to be provided by the CPU
class, it's better to not touch it, and handle the special cases on the
X86CPU object itself.
Current behavior of the code should stay exactly the same.
Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
The compiler is already able to eliminate the kvm_arch_get_supported_cpuid()
calls in kvm_cpu_fill_host() and filter_features_for_kvm(), so we can
eliminate the CONFIG_KVM #ifdefs there.
Also, kvm_cpu_fill_host() and host_cpuid() don't need to check
CONFIG_KVM, as they don't have any KVM-specific function calls.
Tested to build successfully with CONFIG_KVM disabled, using the
following CFLAGS combinations: "-DNDEBUG", "-DNDEBUG -O', "-DNDEBUG
-O0", "-DNDEBUG -O1", "-DNDEBUG -O2".
Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
http://msdn.microsoft.com/en-us/library/windows/hardware/ff541625%28v=vs.85%29.aspx
This code is generic for activating reference time counter or virtual reference time stamp counter
Signed-off-by: Vadim Rozenfeld <vrozenfe@redhat.com>
Reviewed-by: Marcelo Tosatti <mtosatti@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
We don't need the ft[] array on kvm_check_features_against_host()
anymore, as we can simply use the feature_word_info[] array, that has
everything we need.
Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Now that the kvm_cpu_fill_host() code is simplified, we can simply set
the feature word array using a simple loop.
Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Reorder the code so all the code that sets x86_cpu_def->features is at
the end of the function.
Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
There's no need to check CPU xlevel2 before calling
kvm_arch_get_supported_cpuid(s, 0xC0000001, 0, R_EDX), because:
* The kernel won't return any entry for 0xC0000000 if host CPU vendor
is not Centaur (See kvm_dev_ioctl_get_supported_cpuid() on the kernel
code)
* Similarly, the kernel won't return any entry for 0xC0000001 if
CPUID[0xC0000000].EAX is < 0xC0000001
* kvm_arch_get_supported_cpuid() will return 0 if no entry is returned
by the kernel for the requested leaf
For similar reasons, we can simply set x86_cpu_def->xlevel2 directly
instead of making it conditional, because it will be set to 0 CPU vendor
is not Centaur.
This will simplify the kvm_cpu_fill_host() code a little.
Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
[Remove unparseable comment. - Paolo]
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
There's no need to check CPU vendor before calling
kvm_arch_get_supported_cpuid(s, 0xC0000000, 0, R_EAX), because:
* The kernel won't return any entry for 0xC0000000 if host CPU vendor
is not Centaur (See kvm_dev_ioctl_get_cpuid() on the kernel code);
* kvm_arch_get_supported_cpuid() will return 0 if no entry is returned
by the kernel for the requested leaf.
This will simplify the kvm_cpu_fill_host() code a little.
Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
There's no need to check level (CPUID[0].EAX) before calling
kvm_arch_get_supported_cpuid(s, 0x7, 0, R_EBX), because:
* The kernel won't return any entry for CPUID 7 if CPUID[0].EAX is < 7
on the host (See kvm_dev_ioctl_get_cpuid() on the kernel code);
* kvm_arch_get_supported_cpuid() will return 0 if no entry is returned
by the kernel for the requested leaf.
This will simplify the kvm_cpu_fill_host() code a little.
Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Those host_cpuid() calls are useless. They are leftovers from when the
old code using host_cpuid() was removed.
Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
* qemu-kvm/uq/master:
kvm: always update the MPX model specific register
KVM: fix addr type for KVM_IOEVENTFD
KVM: Retry KVM_CREATE_VM on EINTR
mempath prefault: fix off-by-one error
kvm: x86: Separately write feature control MSR on reset
roms: Flush icache when writing roms to guest memory
target-i386: clear guest TSC on reset
target-i386: do not special case TSC writeback
target-i386: Intel MPX
Conflicts:
exec.c
aliguori: fix trivial merge conflict in exec.c
Signed-off-by: Anthony Liguori <aliguori@amazon.com>
Replace an assert_no_error() usage with the error_abort system.
Signed-off-by: Peter Crosthwaite <peter.crosthwaite@xilinx.com>
Reviewed-by: Markus Armbruster <armbru@redhat.com>
Signed-off-by: Luiz Capitulino <lcapitulino@redhat.com>
Features family, model, stepping, level, hv_spinlocks are treated similarly
when passed from command line, so it's not necessary to handle each of them
individually. Collapse them to one catch-all branch which will treat
any not explicitly handled feature in format 'foo=val'.
Any unknown feature will be rejected by property setter so there is no
need to check for unknown feature in cpu_x86_parse_featurestr(), therefore
it's replaced by above mentioned catch-all handler.
Signed-off-by: Igor Mammedov <imammedo@redhat.com>
Signed-off-by: Andreas Färber <afaerber@suse.de>
Features check, enforce, hv_relaxed and hv_vapic are treated as boolean
set to 'on' when passed from command line, so it's not necessary to
handle each of them separately. Collapse them to one catch-all branch
which will treat any feature in format 'foo' as boolean set to 'on'.
Any unknown feature will be rejected by CPU property setter so there is no
need to check for unknown feature in cpu_x86_parse_featurestr(), therefore
it's replaced by above mentioned catch-all handler.
Signed-off-by: Igor Mammedov <imammedo@redhat.com>
Reviewed-by: Eduardo Habkost <ehabkost@redhat.com>
Signed-off-by: Andreas Färber <afaerber@suse.de>
* Additionally convert check_cpuid & enforce_cpuid to bool and make them
members of X86CPU
* Make 'enforce' feature independent from 'check'
Signed-off-by: Igor Mammedov <imammedo@redhat.com>
Signed-off-by: Andreas Färber <afaerber@suse.de>
This motion is preparing for refactoring vCPU APIC subsequently.
Signed-off-by: Chen Fan <chen.fan.fnst@cn.fujitsu.com>
Signed-off-by: Andreas Färber <afaerber@suse.de>
VCPU TSC is not cleared by a warm reset (*), which leaves some types of Linux
guests (non-pvops guests and those with the kernel parameter no-kvmclock set)
vulnerable to the overflow in cyc2ns_offset fixed by upstream commit
9993bc635d01a6ee7f6b833b4ee65ce7c06350b1 ("sched/x86: Fix overflow in
cyc2ns_offset").
To put it in a nutshell, if such a Linux guest without the patch above applied
has been up more than 208 days and attempts a warm reset chances are that
the newly booted kernel will panic or hang.
(*) Intel Xeon E5 processors show the same broken behavior due to
the errata "TSC is Not Affected by Warm Reset" (Intel® Xeon®
Processor E5 Family Specification Update - August 2013): "The
TSC (Time Stamp Counter MSR 10H) should be cleared on
reset. Due to this erratum the TSC is not affected by warm
reset."
Cc: Will Auld <will.auld@intel.com>
Cc: Marcelo Tosatti <mtosatti@redhat.com>
Signed-off-by: Fernando Luis Vazquez Cao <fernando@oss.ntt.co.jp>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Fernando Luis Vázquez Cao <fernando_b1@lab.ntt.co.jp>
