Use DO_UPCAST() instead of container_of() to go from PCIDevice to
I6300State. This ensures that PCIDevice is the first member of struct
I6300State.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
Hello,
In some cases bus driver can deassert "bus master" bit in PCI command
register. The driver will no longer be able to update related registers in
the device. Eventually it will cause QEMU to exit in "virtqueue_num_heads"
function.
Attached path that fixes the described issue.
Best regards,
Yan Vugenfirer.
>From 3fdafbdfad676ec8479dc073cff70bf356868bfe Mon Sep 17 00:00:00 2001
From: Yan Vugenfirer <yvugenfi@redhat.com>
Date: Tue, 8 Sep 2009 10:08:14 -0400
Subject: [PATCH] VirtIO: Fix QEMU crash during Windows PNP tests
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
Add a new VIRTIO_BLK_F_WCACHE feature to virtio-blk to indicate that we have
a volatile write cache that needs controlled flushing. Implement a
VIRTIO_BLK_T_FLUSH operation to flush it.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
Add a enable_write_cache flag in the block driver state, and use it to
decide if we claim to have a volatile write cache that needs controlled
flushing from the guest. The flag is off if cache=writethrough is
defined because O_DSYNC guarantees that every write goes to stable
storage, and it is on for cache=none and cache=writeback.
Both scsi-disk and ide now use the new flage, changing from their
defaults of always off (ide) or always on (scsi-disk).
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
initialize vectors for all vqs to VIRTIO_NO_VECTOR rather than 0 which
is a valid vector. This fixes migration which happened before driver
was loaded.
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Reported-by: Amit Shah <amit.shah@redhat.com>
Tested-by: Amit Shah <amit.shah@redhat.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
commit bf011293fa made virtio-blk-pci not
PCI-compliant, since it makes region 0 (which is an i/o region)
size > 256, and, since PCI 2.1, i/o regions are limited to 256 bytes size.
When the ATA serial number feature is off, which is the default,
make the device spec compliant again, by making region 0 smaller.
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Reported-by: Vadim Rozenfeld <vrozenfe@redhat.com>
Tested-by: Vadim Rozenfeld <vrozenfe@redhat.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
It is quite common for virtio-blk to submit more than one write request in a
row to the qemu block layer. Use bdrv_aio_multiwrite to allow block drivers to
optimize its handling of the requests.
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
Also split the isa bits into a separate source file, so we don't drag in
a dependency for isa-bus.o for machines which want ne2k_pci only.
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Like isa_create_simple, but doesn't call qdev_init, so one can set
properties after creating and before initializing the device.
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
isa-bus owns the isa irqs now, so it can hand them out directly.
There is no need for the separate isa_connect_irqs step, drop it.
Also hard-code isa interrupts which can't be configured anyway.
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Lot of ISA devices work at fixed addresses, so having iobase
as bus property doesn't make much sense. Devices which can
have different iobases will get a device property.
Also simply hard-code stuff which can't be configured anyway.
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
PCI device entries have to have a default version, not 2, because they are
used in the midle of other structures that can have _any_ version number.
We can't use proper versioning here until we have SubSections support.
Why we didn't noticed before? Because in a PC, the only device ported with
a version less that 2 is piix_pm, and for that one, default pci values are
right. If you use a virtio-console, you will see that its state it is not
loaded back.
Thanks to Amit Shah for reporting the problem and help debug the fix.
Signed-off-by: Juan Quintela <quintela@redhat.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
Doing this will make the vcpu ioctl be issued from the I/O thread, instead
of cpu thread. The correct behaviour is to call it from within the cpu thread,
as soon as we are ready to go.
Signed-off-by: Glauber Costa <glommer@redhat.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
The RTC emulation does not set the IRQ flags independent of the IRQ enable bits.
The original MC146818A datasheet from 1984 notes:
"flag bits in Register C [...] are set independent of the
state of the corresponding enable bits in Register B"
Similar sections can be found in newer documentation e.g. in rtc82885.
Qemu and Bochs set the IRQ flags only if they are enabled,
which breaks drivers polling on them.
The following patch corrects this for the update-ended-flag in Qemu only.
It does not fix the handling of the other flags.
Signed-off-by: Bernhard Kauer <kauer@tudos.org>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
Here's a patch to fix the issue introduced by me, as Reimar Döffinger pointed out,
Reimar Döffinger wrote:
> On Thu, Aug 13, 2009 at 03:01:20PM +0300, Naphtali Sprei wrote:
>> Bug fix for segfault when run as i82551 HW:
>> Use Extended TBD only when HW supports it (i82558 and up).
>>
>> Added assertions to guard from such buffer overflow
>> Introduce the MAX_TCB_BYTE_COUNT macro
>> Allocate buf big enough as HW needs (MAX_ETH_FRAME_SIZE -> MAX_TCB_BYTE_COUNT)
>>
>>
>> I don't feel 100% OK with the "s->device >= i82558B" condition
>> since it relies on the numeric (hex) value of those defines, which currently
>> is correct, but changes (which I don't forsee now) might break it.
>
> It seems this was applied. Unfortunately this breaks things on FreeBSD.
> There seem to be multiple issues.
> First, the intel document says the 82551, 82550, 82559 models are all
> supersets of the 82558. Or in other words: they all support this
> feature.
> Only the 82557 does not.
> But then even for that the FreeBSD driver will fail.
> The reason for that is this line:
> eeprom_contents[0xa] = 0x4000;
> the value here must be 0x01000 for all 82557 models it seems.
Correct the logic of determining devices that supports
extended TxCB: only the 82557 do not support it.
Signed-off-by: Naphtali Sprei <nsprei@redhat.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
* Use function pci_config_set_device_id
* Use new macro PCI_DEVICE_ID_INTEL_82557
Signed-off-by: Stefan Weil <weil@mail.berlios.de>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
Full coverage with properties and everything. You can add virtual usb
sticks this way now:
-drive if=none,id=pendrive,path=/some/where
-device usb-storage,drive=pendrive
-usbdevice disk:/path/to/image continues to work.
Other side effects:
usb storage is listed in 'info block' now.
kvm tree should be able to boot from usb via extboot (untested though).
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
Drop num_ports argument for usb_ohci_init_pci(), everybody
calls it with num_ports == 3, so it is pointless.
Convert ohci pci device into qdev.
TODO: convert non-pci ohci adapters.
You can add a OHCI USB Controller to your virtual pc now using
'-device pci-ohci'. Specifying a id is a good idea, so you can
attach usb devices to it, like this:
-device pci-ohci,id=ohci
-device usb-mouse,bus=ohci.0
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
Move usb code from vl.c to usb-bus.c and make it use the new data
structures added by qdev conversion. qemu usb core should be able
to handle multiple USB busses just fine now (untested though).
Kill some usb_*_init() legacy functions, use usb_create_simple()
instead.
Kill some FIXMEs added by the first qdev/usb patch.
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
* Add USBBus.
* Add USBDeviceInfo, move device callbacks here.
* Add usb-qdev helper functions.
* Switch drivers to qdev.
TODO:
* make the rest of qemu aware of usb busses and kill the FIXMEs
added by this patch.
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
Simplify the logic to do everything inside the function.
Signed-off-by: Juan Quintela <quintela@redhat.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
Simplify the logic to do everything inside the function. Return 0xff if index is out of range independetly of DEBUG_CIRRUS
Signed-off-by: Juan Quintela <quintela@redhat.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
Simplify the logic to do everything inside the function.
Signed-off-by: Juan Quintela <quintela@redhat.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
Simplify the logic to do everything inside the function.
Signed-off-by: Juan Quintela <quintela@redhat.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
Simplify the logic to do everything inside the function
Signed-off-by: Juan Quintela <quintela@redhat.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
