This adds tcgbios (this was posted earlier [1] but got lost)
and fixes FDT update at ibm,client-architecture-support
for huge guests.
The full list of changes:
Alexey Kardashevskiy (4):
make: Define default rule for .c when V=1 or V=2
version: update to 20200513
fdt: Avoid recursion when traversing tree
version: update to 20200717
Gustavo Romero (1):
board-qemu: Fix comment about SLOF start address
Stefan Berger (6):
tcgbios: Only write logs for PCRs that are allocated
tcgbios: Fix the vendorInfoSize to be of type uint8_t
tcgbios: Add support for SHA3 type of algorithms
elf: Implement elf_get_file_size to determine size of an ELF image
tcgbios: Implement tpm_hash_log_extend_event_buffer
tcgbios: Measure the bootloader file read from disk
[1] https://patchwork.ozlabs.org/project/qemu-devel/patch/20200513024355.121476-1-aik@ozlabs.ru/
Signed-off-by: Alexey Kardashevskiy <aik@ozlabs.ru>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
seabios 1.14 release is planned for end of july,
early enough to make it into qemu 5.1-rc2 if
everything goes as planned.
Update seabios to a master snapshot now, so it'll get
test coverage during the freeze and the update to the
final version is much smaller (and should have bugfixes
only).
seabios git shortlog
--------------------
Alexey Kirillov (2):
boot: Detect strict boot order (HALT record) in function
virtio: Do not init non-bootable devices
Christian Ehrhardt (1):
build: use -fcf-protection=none when available
Gerd Hoffmann (25):
boot: cache HALT priority
virtio-scsi: skip initializing non-bootable devices
nvme: skip initializing non-bootable devices
timer: add tsctimer_setfreq()
kvm: detect unconditionally
kvm: add support for reading tsc frequency via cpuid.
kvm: add support for reading tsc frequency from kvmclock
sercon: vbe modeset is int 10h function 4f02 not 4f00
pci: factor out ioconfig_cmd()
pci: add mmconfig support
qemu: factor out qemu_cfg_detect()
qemu: rework e820 detection
qemu: check rtc presence before reading cpu count from cmos
virtio-mmio: device probing and initialization.
virtio-mmio: add support to vp_*() functions
virtio-mmio: add support for scsi devices.
virtio-mmio: add support for block devices.
virtio-mmio: print device type
acpi: add xsdt support
acpi: add dsdt parser
acpi: skip kbd init if not present
acpi: find and register virtio-mmio devices
rewrap Makefile lines.
pci: fix mmconfig support
vga: fix cirrus bios
Jason Andryuk (1):
serialio: Preserve Xen DebugOutputPort
Kevin O'Connor (3):
usb-hid: Improve max packet size checking
Revert "ps2port: adjust init routine to fix PS/2 keyboard issues"
boot: Fixup check for only one item in boot list
Matt DeVillier (4):
hw/usb-hid: Don't abort if setting key repeat rate fails
Skip boot menu and timeout with only one boot device
ps2port: adjust init routine to fix PS/2 keyboard issues
boot: Fix logic for boot menu display
Paul Menzel (4):
std/tcg: Replace zero-length array with flexible-array member
boot: Extend `etc/show-boot-menu` to configure skipping boot menu with only one device
boot: Log, if boot menu is skipped
cdrom: Demote `scsi_is_ready` return print to debug level
Roman Bolshakov (1):
timer: Handle decrements of PIT counter
Stefan Berger (3):
tcgbios: Only write logs for PCRs that are in active PCR banks
tcgbios: Fix the vendorInfoSize to be of type u8
tcgbios: Add support for SHA3 type of algorithms
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Upgrade OpenSBI from v0.6 to v0.7 and the pre-built bios images.
The v0.7 release includes the following commits:
f64f4b9 lib: Add a new platform feature to bringup secondary harts
b677a9b lib: Implement hart hotplug
5b48240 lib: Add possible hart status values
e3f69fc lib: Implement Hart State Management (HSM) SBI extension
6704216 lib: Check MSIP bit after returning from WFI
82ae8e8 makefile: Do setup of the install target more flexible
e1a5b73 platform: sifive: fu540: allow sv32 as an mmu-type
8c83fb2 lib: Fix return type of sbi_hsm_hart_started()
00d332b include: Move bits related defines and macros to sbi_bitops.h
a148996 include: sbi_bitops: More useful bit operations
4a603eb platform: kendryte/k210: Set per-HART stack size to 8KB
678c3c3 include: sbi_scratch: Set per-HART scratch size to 4KB
2abc55b lib: Sort build objects in alphabetical order
6e87507 platform: ae350: Sort build objects in alphabetical order
650c0e5 lib: sbi: Fix coding style issues
078686d lib: serial: Fix coding style issues
3226bd9 lib: Simple bitmap library
c741abc include: Simple hartmask library
d6d7e18 lib: sbi_init: Don't allow HARTID greater than SBI_HARTMASK_MAX_BITS
a4a6a81 lib: Introduce SBI_TLB_INFO_INIT() helper macro
d963164 lib: sbi_tlb: Use sbi_hartmask in sbi_tlb_info
71d2b83 lib: Move all coldboot wait APIs to sbi_init.c
2b945fc lib: sbi_init: Use hartmask for coldboot wait
44ce5b9 include: Remove disabled_hart_mask from sbi_platform
2db381f lib: Introduce sbi_hsm_hart_started_mask() API
61f7768 lib: sbi_ecall_legacy: Use sbi_hsm_hart_started_mask() API
466fecb lib: sbi_system: Use sbi_hsm_hart_started_mask() API
9aad831 lib: sbi_ipi: Use sbi_hsm_hart_started_mask() API
eede1aa lib: sbi_hart: Remove HART available mask and related APIs
757bb44 docs: Remove out-of-date documentation
86d37bb lib: sbi: Fix misaligned trap handling
ffdc858 platform: ariane-fpga: Change license for ariane-fpga from GPL-2.0 to BSD-2
4b2f594 sbi: Add definitions for true/false
0cfe49a libfdt: Add INT32_MAX and UINT32_MAX in libfdt_env.h
baac7e0 libfdt: Upgrade to v1.5.1 release
f92147c include: Make sbi_hart_id_to_scratch() as macro
eeae3d9 firmware: fw_base: Optimize _hartid_to_scratch() implementation
16e7071 lib: sbi_hsm: Optimize sbi_hsm_hart_get_state() implementation
823345e include: Make sbi_current_hartid() as macro in riscv_asm.h
9aabba2 Makefile: Fix distclean make target
9275ed3 platform: ariane-fpga: Set per-HART stack size to 8KB
2343efd platform: Set per-HART stack size to 8KB in the template platform codes
72a0628 platform: Use one unified per-HART stack size macro for all platforms
327ba36 scripts: Cover sifive/fu540 in the 32-bit build
5fbcd62 lib: sbi: Update pmp_get() to return decoded size directly
dce8846 libfdt: Compile fdt_addresses.c
fcb1ded lib: utils: Add a fdt_reserved_memory_fixup() helper
666be6d platform: Clean up include header files
6af5576 lib: utils: Move PLIC DT fix up codes to fdt_helper.c
e846ce1 platform: andes/ae350: Fix up DT for reserved memory
8135520 platform: ariane-fpga: Fix up DT for reserved memory
c9a5268 platform: qemu/virt: Fix up DT for reserved memory
6f9bb83 platform: sifive/fu540: Fix up DT for reserved memory
1071f05 platform: sifive/fu540: Remove "stdout-path" fix-up
dd9439f lib: utils: Add a fdt_cpu_fixup() helper
3f1c847 platform: sifive/fu540: Replace cpu0 node fix-up with the new helper
db6a2b5 lib: utils: Add a general device tree fix-up helper
3f8d754 platform: Update to call general DT fix-up helper
87a7ef7 lib: sbi_scratch: Introduce HART id to scratch table
e23d3ba include: Simplify HART id to scratch macro
19bd531 lib: sbi_hsm: Simplify hart_get_state() and hart_started() APIs
3ebfe0e lib: sbi_tlb: Simplify sbi_tlb_entry_process() function
209134d lib: Handle failure of sbi_hartid_to_scratch() API
bd6ef02 include: sbi_platform: Improve sbi_platform_hart_disabled() API
c9f60fc lib: sbi_scratch: Don't set hartid_to_scratch table for disabled HART
680b098 lib: sbi_hsm: Don't use sbi_platform_hart_count() API
db187d6 lib: sbi_hsm: Remove scratch parameter from hart_started_mask() API
814f38d lib: sbi_hsm: Don't use sbi_platform_hart_disabled() API
75eec9d lib: Don't use sbi_platform_hart_count() API
c51f02c include: sbi_platform: Introduce HART index to HART id table
315a877 platform: sifive/fu540: Remove FU540_ENABLED_HART_MASK option
a0c88dd lib: Fix sbi_ecall_register_extension to prevent extension IDs overlap
9a74a64 lib: Check MSIP bit after returning from WFI
5968894 platform: Move ariane standalone fpga project to its own project
ed265b4 platform: fpga/ariane: Remove redundant plic address macros
fb84879 platform: Add OpenPiton platform support
d1d6560 platform: fpga/common: Add a fdt parsing helper functions
040e4e2 lib: utils: Move fdt fixup helper routines to a different file
4c37451 platform: openpiton: Read the device configurations from device tree
4d93586 lib: prevent coldboot_lottery from overflowing
550ba88 scripts: Extend create-binary-archive.sh for unified binary tar ball
160c885 lib: utils: Improve fdt_cpu_fixup() implementation
1de66d1 lib: Optimize unpriv load/store implementation
626467c lib: Remove scratch parameter from unpriv load/store functions
cb78a48 lib: sbi_trap: Remove scratch parameter from sbi_trap_redirect()
d11c79c lib: sbi_emulate_csr: Remove scratch and hartid parameter
5a7bd0c lib: sbi_illegal_insn: Remove mcause, scratch and hartid parameters
fe37d7d lib: sbi_misaligned_ldst: Remove mcause, scratch and hartid parameters
7487116 lib: sbi_ecall: Remove mcause, scratch and hartid parameters
40b221b lib: sbi_trap: Simplify sbi_trap_handler() API
7b211ff include: sbi_platform: Remove priv parameter from hart_start() callback
5b6957e include: Use more consistent name for atomic xchg() and cmpxchg()
dd0f21c lib: sbi_scratch: Introduce sbi_scratch_last_hartid() API
54b2779 include: sbi_tlb: Remove scratch parameter from sbi_tlb_request()
9e52a45 include: sbi_ipi: Remove scratch parameter from most functions
ec0d80f include: sbi_system: Remove scratch parameter and redundant functions
0a28ea5 include: sbi_timer: Remove scratch parameter from most funcitons
648507a include: sbi_console: Remove scratch parameter from sbi_dprintf()
e5a7f55 platform: thead/c910: Use HSM extension to boot secondary cores
f281de8 lib: irqchip/plic: Fix maximum priority threshold value
6c7922e lib: Support vector extension
615587c docs: Update README about supported SBI versions
66d0184 lib: Allow overriding SBI implementation ID
9f1b72c include: Bump-up version to 0.7
Signed-off-by: Bin Meng <bmeng.cn@gmail.com>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
This is a single regression fix for for 5.0:
Greg Kurz (1):
slof: Only close stdout for virtio-serial devices
Signed-off-by: Alexey Kardashevskiy <aik@ozlabs.ru>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
Here's my final pull request for the qemu-5.0 soft freeze. Sorry this
is just under the wire - I hit some last minute problems that took a
while to fix up and retest.
Highlights are:
* Numerous fixes for the FWNMI feature
* A handful of cleanups to the device tree construction code
* Numerous fixes for the spapr-vscsi device
* A number of fixes and cleanups for real mode (MMU off) softmmu
handling
* Fixes for handling of the PAPR RMA
* Better handling of hotplug/unplug events during boot
* Assorted other fixes
-----BEGIN PGP SIGNATURE-----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=BPnR
-----END PGP SIGNATURE-----
Merge remote-tracking branch 'remotes/dgibson/tags/ppc-for-5.0-20200317' into staging
ppc patch queue 2020-03-17
Here's my final pull request for the qemu-5.0 soft freeze. Sorry this
is just under the wire - I hit some last minute problems that took a
while to fix up and retest.
Highlights are:
* Numerous fixes for the FWNMI feature
* A handful of cleanups to the device tree construction code
* Numerous fixes for the spapr-vscsi device
* A number of fixes and cleanups for real mode (MMU off) softmmu
handling
* Fixes for handling of the PAPR RMA
* Better handling of hotplug/unplug events during boot
* Assorted other fixes
# gpg: Signature made Tue 17 Mar 2020 09:55:07 GMT
# gpg: using RSA key 75F46586AE61A66CC44E87DC6C38CACA20D9B392
# gpg: Good signature from "David Gibson <david@gibson.dropbear.id.au>" [full]
# gpg: aka "David Gibson (Red Hat) <dgibson@redhat.com>" [full]
# gpg: aka "David Gibson (ozlabs.org) <dgibson@ozlabs.org>" [full]
# gpg: aka "David Gibson (kernel.org) <dwg@kernel.org>" [unknown]
# Primary key fingerprint: 75F4 6586 AE61 A66C C44E 87DC 6C38 CACA 20D9 B392
* remotes/dgibson/tags/ppc-for-5.0-20200317: (45 commits)
pseries: Update SLOF firmware image
ppc/spapr: Ignore common "ibm,nmi-interlock" Linux bug
ppc/spapr: Implement FWNMI System Reset delivery
target/ppc: allow ppc_cpu_do_system_reset to take an alternate vector
ppc/spapr: Allow FWNMI on TCG
ppc/spapr: Fix FWNMI machine check interrupt delivery
ppc/spapr: Add FWNMI System Reset state
ppc/spapr: Change FWNMI names
ppc/spapr: Fix FWNMI machine check failure handling
spapr: Rename DT functions to newer naming convention
spapr: Move creation of ibm,architecture-vec-5 property
spapr: Move creation of ibm,dynamic-reconfiguration-memory dt node
spapr/rtas: Reserve space for RTAS blob and log
pseries: Update SLOF firmware image
ppc/spapr: Move GPRs setup to one place
target/ppc: Fix rlwinm on ppc64
spapr/xive: use SPAPR_IRQ_IPI to define IPI ranges exposed to the guest
hw/scsi/spapr_vscsi: Convert debug fprintf() to trace event
hw/scsi/spapr_vscsi: Prevent buffer overflow
hw/scsi/spapr_vscsi: Do not mix SRP IU size with DMA buffer size
...
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
The only change here is moving the decision about rtas-size
to QEMU.
Signed-off-by: Alexey Kardashevskiy <aik@ozlabs.ru>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
Although the real world SiFive HiFive Unleashed board is a 64-bit
hardware configuration, with QEMU it is possible to test 32-bit
configuration with the same hardware features.
This updates the roms Makefile to add the build rules for creating
the 32-bit OpenSBI firmware image for sifive_u machine. A pre-built
OpenSBI v0.6 image has been added as the default bios for 32-bit
sifive_u machine.
Signed-off-by: Bin Meng <bmeng.cn@gmail.com>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Signed-off-by: Palmer Dabbelt <palmerdabbelt@google.com>
Upgrade OpenSBI from v0.5 to v0.6 and the pre-built bios images.
The v0.6 release includes the following commits:
dd8ef28 firmware: Fix compile error for FW_PAYLOAD with latest GCC binutils
98f4a20 firmware: Introduce relocation lottery
f728a0b include: Sync-up encoding with priv v1.12-draft and hypervisor v0.5-draft
18897aa include: Use _UL() and _ULL() for defines in riscv_encoding.h
7a13beb firmware: Add preferred boot HART field in struct fw_dynamic_info
215421c lib: Remove date and time from init message
838657c include: Remove ilen member of struct unpriv_trap
b1d8c98 lib: No need to set VSSTATUS.MXR bit in get_insn()
0e1322b lib: Better naming of unpriv APIs for wider use
75f903d lib: Simplify trap parameters in sbi_ecall functions
c96cc03 lib: Fix CPU capabilities detection function
ab14f94 lib: Fix probe extension
813f7f4 lib: Add error detection for misa_extension
dc40042 include: sbi_platform: fix compilation for GCC-9
bd732ae include: Add guest external interrupt related defines
6590a7d lib: Delegate guest page faults to HS-mode
4370f18 include: Extend struct sbi_trap_info for mtval2 and mtinst
086dbdf lib: Fix sbi_get_insn() for load guest page fault
2be424b lib: Extend trap redirection for hypervisor v0.5 spec
7219477 lib: Use MTINST CSR in misaligned load/store emulation
b8732fe lib: Add replacement extension and function ids
aa0ed1d lib: Remove redundant IPI types
1092663 lib: Add TIME extension in SBI
9777aee lib: Add IPI extension in SBI
9407202 lib: Add hfence instruction encoding
331ff6a lib: Support stage1 and stage2 tlb flushing
86a31f5 lib: Implement RFENCE extension
c7d1b12 firmware: Return real DTB address when FW_xyz_FDT_ADDR is not defined
9beb573 firmware: Improve comments for fw_prev_arg1() and fw_next_arg1()
fc6bd90 docs: Improve docs for FDT address passing
46a90d9 lib: utils: Support CLINT with 32bit MMIO access on RV64 system
c0849cd platform: Add T-head C910 initial support
e746673 lib: Remove unnecessary checks from init_coldboot() and init_warmboot()
c3e406f lib: Add initial sbi_exit() API
55e191e lib: Add system early_exit and final_exit APIs
6469ed1 lib: Add timer exit API
b325f6b lib: Add ipi exit API
1993182 lib: Add irqchip exit API
2aa43a1 lib: save/restore MIE CSR in sbi_hart_wait_for_coldboot()
b0c9787 lib: do sbi_exit() upon halt IPI
15ed1e7 lib: improve system reboot and shutdown implementation
73c19e6 lib: zero-out memory allocated using sbi_scratch_alloc_offset()
a67fd68 lib: Add sbi_init_count() API
049ad0b build: Use -ffreestanding
e340bbf include: Add OPENSBI_EXTERNAL_SBI_TYPES in sbi_types.h
b28b8ac docs: Add description of using OPENSBI_EXTERNAL_SBI_TYPES
adf8b73 platform: thead/c910: Remove SBI_PLATFORM_HAS_PMP
f95dd39 docs: platform: Update SiFive FU540 doc as-per U-Boot v2020.01
6ffe1be firmware: Fix placement of .align directives
7daccae platform: thead/c910: Don't enable L2 cache in warm boot
a73d45c platform: thead/c910: Don't set plic/clint address in warm boot
30cdf00 scripts: Add C910 to platform list in the binary archive script
0492c5d include: Typo fix in comment for SBI_SCRATCH_SIZE define
046cc16 lib: Move struct sbi_ipi_data definition to sbi_ipi.c
3d2aaac lib: Introduce sbi_ipi_send_smode() API
da9b76b lib: Introduce sbi_ipi_send_halt() API
a8b4b83 lib: Introduce sbi_tlb_fifo_request() API
5f762d1 lib: Introduce sbi_ipi_event_create/destroy() APIs
817d50d lib: Drop _fifo from the name of various sbi_tlb_fifo_xyz() functions
84cd4fc lib: Initialize TLB management directly from coldboot/warmboot path
0a411bf include: Add generic and simple list handling APIs
37923c4 lib: Add dynamic registration of SBI extensions
7668502 lib: Factor-out SBI legacy extension
161b348 lib: Factor-out SBI replacement extensions
43ac621 lib: Factor-out SBI vendor extension
021b9e7 lib: Factor-out SBI base extension
85647a1 platform: template: typo fix in system reboot/shutdown names
ac1c229 platform: Update UART base addresses for qemu/sifve_u
d79173b platform: Add an platform ops to return platform specific tlb flush limit
2c2bbe7 platform: sifive/fu540: Set tlb range flush limit to zero
5ff1ab0 makefile: add support for building on macOS
6d0b4c5 platform: Drop qemu/sifive_u support
9a717ec platform: sifive: fu540: Add platform specific 'make run' cmd
d6fa7f9 doc: sifive: fu540: Update QEMU instruction when using U-Boot as the payload
179edde lib: sbi_scratch: use bitwise ops in sbi_scratch_alloc_offset()
897b8fb lib: Use __builtin_ctzl() in pmp_get()
1a8ca08 lib: Initialize out value in SBI calls
c2bfa2b lib: irqchip/plic: Disable all contexts and IRQs
c2f23cc platform: Add Spike initial support
a062200 platform: Remove stale options from config.mk files
c03c8a1 scripts: Add Spike to platform list of binary archive script
29bb2a6 docs: platform: Add documentation for Spike platform
48b06ad ThirdPartyNotices: Fix doc styles
892e879 doc: coreboot: Fix doc styles
fdfb533 doc: payload_linux: Fix doc styles
44d1296 doc: andes-ae350: Fix doc styles
a8ef0b5 doc: ariane-fpga: Fix doc styles
82fd42f doc: qemu_virt: Fix doc styles
f8ce996 doc: sifive_fu540: Fix doc styles
27a5c7f doc: thead-c910: Fix doc styles
0b41453 Revert "lib: Use __builtin_ctzl() in pmp_get()"
c66543d lib: utils: htif: Fix 32-bit build
bc874e3 lib: Don't check MIDELEG and MEDELEG at end of delegate_traps()
24c3082 lib: Print interrupt and exception delegation in boot prints
66fb729 platform: sifive: fu540: Add 32-bit specific fdt/payload addresses
3e7d666 platform: qemu: virt: Correct the typo in config.mk
c3b3b8f lib: Fix typo in atomic exchange functions
3936243 lib: Use available hart mask for correct hbase value
f8b3bb8 lib: Simplify the for-loop in sbi_ipi_send_many()
ac5e821 include: Bump-up version to 0.6
Signed-off-by: Bin Meng <bmeng.cn@gmail.com>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Signed-off-by: Palmer Dabbelt <palmerdabbelt@google.com>
This adds vTPM support, full-FDT-rebuild-on-CAS fixes and
basic ext4 support.
The full changelog is:
Alexey Kardashevskiy (10):
disk-label: Prepare for extenting
disk-label: Support Linux GPT partition type
ext2: Prepare for extending
ext2: Rename group-desc-size
ext2: Read size of group descriptors
ext2: Read all 64bit of inode number
ext2/4: Add basic extent tree support
elf64: Add LE64 ABIv1/2 support for loading images to given address
fdt: Fix creating new nodes at H_CAS
version: update to 20200221
Greg Kurz (2):
fdt: Fix update of "interrupt-controller" node at CAS
fdt: Delete nodes of devices removed between boot and CAS
Stefan Berger (8):
slof: Implement SLOF_get_keystroke() and SLOF_reset()
slof: Make linker script variables accessible
qemu: Make print_version variable accessible
tpm: Add TPM CRQ driver implementation
tpm: Add sha256 implementation
tcgbios: Add TPM 2.0 support and firmware API
tcgbios: Implement menu to clear TPM 2 and activate its PCR banks
tcgbios: Measure the GPT table
Signed-off-by: Alexey Kardashevskiy <aik@ozlabs.ru>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
Helge Deller (13):
Add PDC_MEM_MAP and ENTRY_INIT_SRCH_FRST for OSF/MkLinux
Return non-existant BTLB for PDC_BLOCK_TLB
Add serial, parallel and LAN port support of LASI chip
Implement ENTRY_IO_BBLOCK_IN IODC function
Do not print \r on parisc SeaBIOS
Fix serial ports and add PDC_MODEL functions for special instructions enablement
Implement SeaBIOS returning additional addresses. Fixes HP-UX boot.
Fix mod_pgs (number of pages) for graphic cards
Merge pull request #3 from svenschnelle/sti
Merge pull request #4 from svenschnelle/parisc-qemu-4.1.0
parisc: Implement PDC rendenzvous
parisc: Improve soft power button emulation
parisc: Fix line wrapping in STI console code
Sven Schnelle (7):
parisc: fix PDC info for graphics adapter
parisc: add missing header guard to hppa.h
parisc: add LASI PS/2 emulation.
parisc: Add STI support
parisc: wire up graphics console
parisc: Add support for setting STI screen resolution
parisc: support LASI RTC register
Required for STI and LASI support. Also adds a few Bugfixes.
Signed-off-by: Sven Schnelle <svens@stackframe.org>
Message-Id: <20191220211512.3289-7-svens@stackframe.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Update to the final 1.13 release. No code changes.
git shortlog
============
Kevin O'Connor (1):
docs: Note v1.13.0 release
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
This fixes PCI bridges support regression.
This enables IOMMU support in virtio drivers.
The full list of changes is:
Alexey Kardashevskiy (12):
allocator: Fix format strings for DEBUG
virtio: Make virtio_set_qaddr static
client: Load initramdisk location
sloffs: Fix -Wunused-result gcc warnings in read/write
pci-phb: Reimplement dma-map-in/out
virtio: Store queue descriptors in virtio_device
virtio-net: Init queues after features negotiation
virtio: Enable IOMMU
ibm,client-architecture-support: Fix stack handling
fdt: Fix updating the tree at H_CAS
version: update to 20191206
version: update to 20191217
Michael Roth (1):
dma: Define default dma methods for using by client/package instances
Signed-off-by: Alexey Kardashevskiy <aik@ozlabs.ru>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
Due to lchs support merge in upstream seabios gone wrong (applied v3
instead of v4) here is another seabios snapshot update with the
mis-merge fixed up, so lchs support should actually work in -rc2.
Also picked up two tpm bugfixes.
git shortlog from previous snapshot
===================================
Gerd Hoffmann (4):
Revert "geometry: Apply LCHS values for boot devices"
Revert "config: Add toggle for bootdevice information"
Revert "geometry: Add boot_lchs_find_*() utility functions"
Revert "geometry: Read LCHS from fw_cfg"
Sam Eiderman (4):
geometry: Read LCHS from fw_cfg
boot: Build ata and scsi paths in function
geometry: Add boot_lchs_find_*() utility functions
geometry: Apply LCHS values for boot devices
Stefan Berger (2):
tpm: Require a response to have minimum size of a valid response header
tcgbios: Check for enough bytes returned from TPM2_GetCapability
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
This contains a handful of patches that I'd like to target for 4.2:
* OpenSBI upgrade to 0.5
* Increase in the flash size of the virt board.
* A non-functional cleanup.
* A cleanup to our MIP handling that avoids atomics.
This passes "make check" and boots OpenEmbedded for me.
-----BEGIN PGP SIGNATURE-----
iQJHBAABCgAxFiEEAM520YNJYN/OiG3470yhUCzLq0EFAl3Nn18THHBhbG1lckBk
YWJiZWx0LmNvbQAKCRDvTKFQLMurQQYxEACVIdVobMaddZC1tUhzyY9Ef2AzRqca
GyyHIyMlmVzOhHOD0Rig4HQWGzvxSxmzrNNYc0N0kh7IsnVUkOLyROv5tvSpMLpb
hyLwMcIWTNWVLraAZ/e/TTwkzKenXB2gvl5ny00LhUW4Lt0lwkFgB6SMtL1R5K+r
HYYeiWPXbMfUnft/zpdTN0mT4Y8+gUai6XK83QOuwZohsAepBvKDVJD5uORZ6gZK
hQfaWZ/FzMDDC0BeQtt7NN6ElLJjilzESxgoDoLrcpq2BfmSWMo4XKH/k9DzNTbi
iWqel1q/lirxclglqjYFDuqhb37gfHYtPqQG+jZ5+7YVuyVhB6+dRIIGbzp5Jrv5
0DcKmmI51ngKpiWcos70AJh+inM5fRgEhW024IntInwn0Y8aEpTo4YAAXUIMQleF
3An9CSjXuxHSdtJItIJtLLGhaV7i2k5xRWIM+hgpUcW2sYqUdfB0URp+pEg2Y/4k
1btPXfWLbd0AGlXMwVv6QYdaKKhFE+0XcIK+HqsIec0qQlJ0lksdNJyNQTsxqCfP
mQugcBwZJp/4RoMrT14RMFhPfAZjZAEZuh3IKBCMoKui4RS51YF6MNXevR2J5VYK
BNotdb2+ceEtLOnaKReqYzXtl6MuSzLmPWKZrrA3l/CdtKXkAd6IUhjNvrNz5Nie
cZyV3qhagZ3P3Q==
=vwgx
-----END PGP SIGNATURE-----
Merge remote-tracking branch 'remotes/palmer/tags/riscv-for-master-4.2-rc2' into staging
RISC-V Fixes for 4.2-rc2
This contains a handful of patches that I'd like to target for 4.2:
* OpenSBI upgrade to 0.5
* Increase in the flash size of the virt board.
* A non-functional cleanup.
* A cleanup to our MIP handling that avoids atomics.
This passes "make check" and boots OpenEmbedded for me.
# gpg: Signature made Thu 14 Nov 2019 18:39:27 GMT
# gpg: using RSA key 00CE76D1834960DFCE886DF8EF4CA1502CCBAB41
# gpg: issuer "palmer@dabbelt.com"
# gpg: Good signature from "Palmer Dabbelt <palmer@dabbelt.com>" [unknown]
# gpg: aka "Palmer Dabbelt <palmer@sifive.com>" [unknown]
# gpg: WARNING: This key is not certified with a trusted signature!
# gpg: There is no indication that the signature belongs to the owner.
# Primary key fingerprint: 00CE 76D1 8349 60DF CE88 6DF8 EF4C A150 2CCB AB41
* remotes/palmer/tags/riscv-for-master-4.2-rc2:
riscv/virt: Increase flash size
opensbi: Upgrade from v0.4 to v0.5
target/riscv: Remove atomic accesses to MIP CSR
remove unnecessary ifdef TARGET_RISCV64
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
This release has:
Lot of critical fixes
Hypervisor extension support
SBI v0.2 base extension support
Debug prints support
Handle traps when doing unpriv load/store
Allow compiling without FP support
Use git describe to generate boot-time banner
Andes AE350 platform support
ShortLog:
Anup Patel (14):
platform: sifive/fu540: Move FDT further up
lib: Allow compiling without FP support
lib: Introduce sbi_dprintf() API
lib: Use sbi_dprintf() for invalid CSRs
lib: Handle traps when doing unpriv load/store in get_insn()
lib: Delegate supervisor ecall to HS-mode when H extension available
lib: Extend sbi_hart_switch_mode() to support hypervisor extension
lib: Extend sbi_trap_redirect() for hypervisor extension
lib: Redirect WFI trapped from VS/VU mode to HS-mode
include: Extend get_insn() to read instruction from VS/VU mode
lib: Emulate HTIMEDELTA CSR for platforms not having TIME CSR
Makefile: Minor fix in OPENSBI_VERSION_GIT
lib: Fix coldboot race condition observed on emulators/simulators
include: Bump-up version to 0.5
Atish Patra (16):
lib: Provide an atomic exchange function unsigned long
lib: Fix race conditions in tlb fifo access.
platform: Remove the ipi_sync method from all platforms.
lib: Fix timer for 32 bit
lib: Support atomic swap instructions
lib: Upgrade to full flush if size is at least threshold
docs: Update the fu540 platform guide as per U-Boot documents.
lib: Change tlb range flush threshold to 4k page instead of 1G
lib: provide a platform specific tlb range flush threshold
lib: Fix tlb flush range limit value
Test: Move test payload related code out of interface header
lib: Align error codes as per SBI specification.
lib: Rename existing SBI implementation as 0.1.
lib: Remove redundant variable assignment
lib: Implement SBI v0.2
lib: Provide a platform hook to implement vendor specific SBI extensions.
Bin Meng (6):
platform: sifive: fu540: Use standard value string for cpu node status
README: Document 32-bit / 64-bit images build
treewide: Use conventional names for 32-bit and 64-bit
platform: sifive: fu540: Expand FDT size before any patching
firmware: Use macro instead of magic number for boot status
docs: platform: Update descriptions for qemu/sifive_u support
Damien Le Moal (4):
kendryte/k210: Use sifive UART driver
kendryte/k210: remove sysctl code
README: Update license information
kendryte/k210: remove unused file
Georg Kotheimer (1):
utils: Use cpu_to_fdt32() when writing to fdt
Jacob Garber (4):
lib: Use bitwise & instead of boolean &&
lib: Use correct type for return value
lib: Prevent unintended sign extensions
lib: Correct null pointer check
Lukas Auer (1):
firmware: do not use relocated _boot_status before it is valid
Nylon Chen (3):
firmware: Fix the loop condition of _wait_relocate_copy_done section
platform: Add Andes AE350 initial support
scripts: Add AE350 to platform list in the binary archive script
Palmer Dabbelt (1):
Include `git describe` in OpenSBI
Zong Li (1):
Write MSIP by using memory-mapped control register
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
Reviewed-by: Palmer Dabbelt <palmer@sifive.com>
Signed-off-by: Palmer Dabbelt <palmer@sifive.com>
Signed-off-by: Palmer Dabbelt <palmer@dabbelt.com>
seabios 1.13 will be released later this month. This patch updates the
seabios submodule and binaries in qemu to a snapshot of git master.
That will increase the test coverage of the upcoming seabios release and
will also make the number of changes smaller when we update to the final
1.13 release during qemu code freeze for 4.2.
v3: add ahci bugfix
v2: build binaries with gcc 4.8.5 instead of gcc 8.3.1 (rhel7).
git shortlog rel-1.12.1..
=========================
David Woodhouse (2):
csm: Sanitise alignment constraint in Legacy16GetTableAddress
csm: Fix boot priority translation
Denis Plotnikov (1):
virtio: extend virtio queue size to 256
Gerd Hoffmann (21):
vga: move modelist from bochsvga.c to new svgamodes.c
vga: make memcpy_high() public
vga: add atiext driver
vga: add ati bios tables
vbe: add edid support.
ati: add edid support.
bochsvga: add edid support.
bochsdisplay: add edid support.
bochsdisplay: parse resolution from edid.
add get_keystroke_full() helper
bootmenu: add support for more than 9 entries
optionrom: disallow int19 redirect for pnp roms.
ati-vga: make less verbose
ati-vga: fix ati_read()
ati-vga: make i2c register and bits configurable
ati-vga: try vga ddc first
ati-vga: add rage128 edid support
bochsdisplay: add copyright and license to bochsdisplay.c
ramfb: add copyright and license to ramfb.c
cp437: add license to cp437.c
ahci: zero-initialize port struct
Joseph Pacheco-Corwin (1):
bootsplash: Added support for 16/24/32bpp in one function
Kevin O'Connor (10):
output: Avoid thunking to 16bit mode in printf() if no vgabios
docs: Update mailing list archive links
docs: Fix cut-and-paste error in Mailinglist.md archive link
usb-ehci: Clear pipe token on pipe reallocate
pciinit: Use %pP shorthand for printing device ids in intel_igd_setup()
virtio-pci: Use %pP format in dprintf() calls
Makefile: Build with -Wno-address-of-packed-member
svgamodes: Add copyright notice to vgasrc/svgamodes.c
docs: Add developer-certificate-of-origin
docs: Note release date for v1.12.1
Liran Alon (1):
pvscsi: ring_desc do not have to be page aligned
Sam Eiderman (6):
smbios: Add missing zero byte to Type 0
geometry: Read LCHS from fw_cfg
boot: Reorder functions in boot.c
geometry: Add boot_lchs_find_*() utility functions
config: Add toggle for bootdevice information
geometry: Apply LCHS values for boot devices
Stefan Berger (2):
tcgbios: Use table to convert hash to buffer size
tcgbios: Implement TPM 2.0 menu item to activate and deactivate PCR banks
Stefano Garzarella (1):
qemu: avoid debug prints if debugcon is not enabled
Stephen Douthit (1):
tpm: Check for TPM related ACPI tables before attempting hw probe
Uwe Kleine-König (3):
cbvga: reuse svga modes definitions from svgamodes.c
Add additional resolutions for 16:9 displays: 1600x900 and 2560x1440
Remove dos line endings introduced in the last two commits
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
This aims v4.2 and fixes:
1. full FDT rendering;
2. gcc9 -Waddress-of-packed-member.
Signed-off-by: Alexey Kardashevskiy <aik@ozlabs.ru>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
qboot is a minimalist x86 firmware for booting Linux kernels. It does
the mininum amount of work required for the task, and it's able to
boot both PVH images and bzImages without relying on option roms.
This characteristics make it an ideal companion for the microvm
machine type.
Signed-off-by: Sergio Lopez <slp@redhat.com>
Reviewed-by: Stefano Garzarella <sgarzare@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
This fixes USB host bus adapter name in the device tree to match QEMU's
one.
Signed-off-by: Alexey Kardashevskiy <aik@ozlabs.ru>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
With the support of heterogeneous harts and PRCI model, it's now
possible to use the OpenSBI image (PLATFORM=sifive/fu540) built
for the real hardware.
Signed-off-by: Bin Meng <bmeng.cn@gmail.com>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Signed-off-by: Palmer Dabbelt <palmer@sifive.com>
This allocates space for FWNMI log in RTAS and fixes phandles at
the ibm,client-architecture-support stage.
The full list is:
* libnet: Fix the check of the argument lengths of the "ping" command
* fdt: Update phandles after H_CAS
* rtas: Reserve space for FWNMI log
Signed-off-by: Alexey Kardashevskiy <aik@ozlabs.ru>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
The only change that SLOF does not rely on QEMU providing an RTAS blob
and provides one itself:
https://git.qemu.org/?p=SLOF.git;a=commitdiff;h=5e4ed1fd0f39e
Signed-off-by: Alexey Kardashevskiy <aik@ozlabs.ru>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
Currently the make rules are wrongly using qemu/virt opensbi image
for sifive_u machine. Correct it.
Signed-off-by: Bin Meng <bmeng.cn@gmail.com>
Reviewed-by: Chih-Min Chao <chihmin.chao@sifive.com>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Message-id: 1564812484-20385-1-git-send-email-bmeng.cn@gmail.com
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Add OpenSBI version 0.4 as a git submodule and as a prebult binary.
OpenSBI (https://github.com/riscv/opensbi) aims to provide an open-source
reference implementation of the RISC-V Supervisor Binary Interface (SBI)
specifications for platform-specific firmwares executing in M-mode. For all
supported platforms, OpenSBI provides several runtime firmware examples.
These example firmwares can be used to replace the legacy riscv-pk bootloader
and enable the use of well-known bootloaders such as U-Boot.
OpenSBI is distributed under the terms of the BSD 2-clause license
("Simplified BSD License" or "FreeBSD License", SPDX: BSD-2-Clause). OpenSBI
source code also contains code reused from other projects desribed here:
https://github.com/riscv/opensbi/blob/master/ThirdPartyNotices.md.
In this case all of the code we are using from OpenSBI is BSD 2-clause
as we aren't using the Kendryte code (Apache-2.0) with QEMU and libfdt
is dual licensed as BSD 2-clause (and GPL-2.0+). OpenSBI isn't being
linked with QEMU either it is just being included with QEMU.
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
Reviewed-by: Bin Meng <bmeng.cn@gmail.com>
Reviewed-by: Guenter Roeck <linux@roeck-us.net>
Tested-by: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Palmer Dabbelt <palmer@sifive.com>
This only has a fix for ipv4-after-ipv6 booting problem.
Signed-off-by: Alexey Kardashevskiy <aik@ozlabs.ru>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
(1) For TianoCore Bugzilla
https://bugzilla.tianocore.org/show_bug.cgi?id=1373
the majority of the edk2 tree was relicensed under the
BSD-2-Clause-Patent license:
https://spdx.org/licenses/BSD-2-Clause-Patent.html>
Edk2 commit f53de8aecb12 ("edk2: Add License-History.txt", 2019-04-09)
added a new file called "License-History.txt", describing license and
contributor agreement changes over time.
(2) For advacing edk2's OpenSSL git submodule to the 1.1.1b release, a
more up-to-date ArmSoftFloatLib instance became necessary, on 32-bit
ARM. Therefore, the embedded (and by now, obsolete) Berkeley SoftFloat
library was replaced with a git submodule of the same, checked out at
the latest release ("3e", plus a typo fix on top -- commit
b64af41c3276). This was implemented for TianoCore Bugzilla
https://bugzilla.tianocore.org/show_bug.cgi?id=1845
in edk2 commit range b6cfa686e42d..371e7001e8d5.
Include the edk2 project's "License-History.txt" file, and the Berkeley
SoftFloat library's "COPYING.txt", in our generated
"pc-bios/edk2-licenses.txt" text file.
Cc: Philippe Mathieu-Daudé <philmd@redhat.com>
Ref: https://bugs.launchpad.net/qemu/+bug/1831477
Signed-off-by: Laszlo Ersek <lersek@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Tested-by: Philippe Mathieu-Daudé <philmd@redhat.com>
At tag "edk2-stable201905", the build flags HTTP_BOOT_ENABLE and
TLS_ENABLE have become useless. Their roles have been taken by
NETWORK_HTTP_BOOT_ENABLE and NETWORK_TLS_ENABLE, respectively. Remove the
old build flags.
Cc: Philippe Mathieu-Daudé <philmd@redhat.com>
Ref: https://bugs.launchpad.net/qemu/+bug/1831477
Signed-off-by: Laszlo Ersek <lersek@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Tested-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Due to edk2 commits 631195044ff0 ("OvmfPkg: Update DSC/FDF to use
NetworkPkg's include fragment file.", 2019-05-16) and 157a3b1aa50f
("ArmVirtPkg: Update DSC/FDF to use NetworkPkg's include fragment file.",
2019-05-16), we'll have to pefix the HTTP_BOOT_ENABLE and TLS_ENABLE build
flags with "NETWORK_", for building edk2 at tag "edk2-stable201905".
Right now the new flags are no-ops, so we can insert them separately,
before advancing our edk2 submodule reference. We will remove the old
flags afterwards.
Cc: Philippe Mathieu-Daudé <philmd@redhat.com>
Ref: https://bugs.launchpad.net/qemu/+bug/1831477
Signed-off-by: Laszlo Ersek <lersek@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Tested-by: Philippe Mathieu-Daudé <philmd@redhat.com>