Specifying the metadata cache sizes in clusters results in less clusters
(and much less bytes) covered for small cluster sizes and vice versa.
Using a constant byte size reduces this difference, and makes it
possible to manually specify the cache size in an easily comprehensible
unit.
Signed-off-by: Max Reitz <mreitz@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Some code in the block layer makes potentially huge allocations. Failure
is not completely unexpected there, so avoid aborting qemu and handle
out-of-memory situations gracefully.
This patch addresses the allocations in the qcow2 block driver.
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
It returns a multiple of the sector size.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Max Reitz <mreitz@redhat.com>
Reviewed-by: Benoit Canet <benoit@irqsave.net>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Instead of bdrv_getlength().
Aside: a few of these callers don't handle errors. I didn't
investigate whether they should.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Benoit Canet <benoit@irqsave.net>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
qcow2's report_unsupported_feature() had two bugs: A 32 bit truncation
would prevent feature table entries for bits 32-63 from being used, and
it could assign errp multiple times if there was more than one unknown
feature, resulting in an error_set() assertion failure.
Fix the truncation, make sure to set the error exactly once and add a
qemu-iotests case for it.
This fixes https://bugs.launchpad.net/qemu/+bug/1342704/
Reported-by: Maria Kustova <maria.k@catit.be>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
If a qcow2 image has a shorter backing file and a read request to
unallocated clusters goes across EOF of the backing file, the backing
file sees a shortened request and the rest is filled with zeros.
However, the original too long qiov was used with the shortened request.
This patch makes the qiov size match the request size, avoiding a
potential buffer overflow in raw-posix.
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Reviewed-by: Max Reitz <mreitz@redhat.com>
Since we parse backing.* options to add a backing file from the command
line when the driver didn't assign one, it has been possible to have a
backing file for e.g. raw images (it just was never accessed).
This is obvious nonsense and should be rejected.
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Now that all backend drivers are using QemuOpts, remove all
QEMUOptionParameter related codes.
Signed-off-by: Dong Xu Wang <wdongxu@linux.vnet.ibm.com>
Signed-off-by: Chunyan Liu <cyliu@suse.com>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Signed-off-by: Dong Xu Wang <wdongxu@linux.vnet.ibm.com>
Signed-off-by: Chunyan Liu <cyliu@suse.com>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Change block layer to support both QemuOpts and QEMUOptionParameter.
After this patch, it will change backend drivers one by one. At the end,
QEMUOptionParameter will be removed and only QemuOpts is kept.
Signed-off-by: Dong Xu Wang <wdongxu@linux.vnet.ibm.com>
Signed-off-by: Chunyan Liu <cyliu@suse.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Introduced in commit 5a8a30d. Spotted by Coverity.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Benoit Canet <benoit@irqsave.net>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Instead of blindly relying on a normal integer having a width of 32 bits
(which is a pretty good assumption, but we should not rely on it if
there is no need), use the correct format string macros.
This does not touch DEBUG output.
Signed-off-by: Max Reitz <mreitz@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
If lazy refcounts are enabled for a backing file, committing to this
backing file may leave it in a dirty state even if the commit succeeds.
The reason is that the bdrv_flush() call in bdrv_commit() doesn't flush
refcount updates with lazy refcounts enabled, and qcow2_reopen_prepare()
doesn't take care to flush metadata.
In order to fix this, this patch also fixes qcow2_mark_clean(), which
contains another ineffective bdrv_flush() call beause lazy refcounts are
disabled only afterwards. All existing callers of qcow2_mark_clean()
either don't modify refcounts or already flush manually, so that this
fixes only a latent, but not yet actually triggerable bug.
Another instance of the same problem is live snapshots. Again, a real
corruption is prevented by an explicit flush for non-read-only images in
external_snapshot_prepare(), but images using lazy refcounts stay dirty.
Cc: qemu-stable@nongnu.org
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
preallocate() only links the first QCowL2Meta's data clusters into the
L2 table and ignores any chained QCowL2Metas in the linked list.
Chains of QCowL2Meta structs are built up when contiguous clusters span
L2 tables. Each QCowL2Meta describes one L2 table update. This is a
rare case in preallocate() but can happen.
This patch fixes preallocate() by iterating over the whole list of
QCowL2Metas. Compare with the qcow2_co_writev() function's
implementation, which is similar but also also handles request
dependencies. preallocate() only performs one allocation at a time so
there can be no dependencies.
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
This avoids an unbounded allocation.
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Reviewed-by: Max Reitz <mreitz@redhat.com>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
The qcow2 code assumes that s->snapshots is non-NULL if s->nb_snapshots
!= 0. By having the initialisation of both fields separated in
qcow2_open(), any error occuring in between would cause the error path
to dereference NULL in qcow2_free_snapshots() if the image had any
snapshots.
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Reviewed-by: Max Reitz <mreitz@redhat.com>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
If the size becomes larger than what qcow2_open() would accept, fail the
growing operation.
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Reviewed-by: Max Reitz <mreitz@redhat.com>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
free_cluster_index is only correct if update_refcount() was called from
an allocation function, and even there it's brittle because it's used to
protect unfinished allocations which still have a refcount of 0 - if it
moves in the wrong place, the unfinished allocation can be corrupted.
So not using it any more seems to be a good idea. Instead, use the
first requested cluster to do the calculations. Return -EAGAIN if
unfinished allocations could become invalid and let the caller restart
its search for some free clusters.
The context of creating a snapsnot is one situation where
update_refcount() is called outside of a cluster allocation. For this
case, the change fixes a buffer overflow if a cluster is referenced in
an L2 table that cannot be represented by an existing refcount block.
(new_table[refcount_table_index] was out of bounds)
[Bump the qemu-iotests 026 refblock_alloc.write leak count from 10 to
11.
--Stefan]
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Reviewed-by: Max Reitz <mreitz@redhat.com>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
len could become negative and would pass the check then. Nothing bad
happened because bdrv_pread() happens to return an error for negative
length values, but make variables for sizes unsigned anyway.
This patch also changes the behaviour to error out on invalid lengths
instead of silently truncating it to 1023.
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Reviewed-by: Max Reitz <mreitz@redhat.com>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
This avoids an unbounded allocation.
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Reviewed-by: Max Reitz <mreitz@redhat.com>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
This avoid unbounded memory allocation and fixes a potential buffer
overflow on 32 bit hosts.
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Reviewed-by: Max Reitz <mreitz@redhat.com>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
The end of the refcount table must not exceed INT64_MAX so that integer
overflows are avoided.
Also check for misaligned refcount table. Such images are invalid and
probably the result of data corruption. Error out to avoid further
corruption.
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Reviewed-by: Max Reitz <mreitz@redhat.com>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Limit the in-memory reference count table size to 8 MB, it's enough in
practice. This fixes an unbounded allocation as well as a buffer
overflow in qcow2_refcount_init().
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Reviewed-by: Max Reitz <mreitz@redhat.com>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Header, header extension and the backing file name must all be stored in
the first cluster. Setting the backing file to a much higher value
allowed header extensions to become much bigger than we want them to be
(unbounded allocation).
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Reviewed-by: Max Reitz <mreitz@redhat.com>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
This fixes an unbounded allocation for s->unknown_header_fields.
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Reviewed-by: Max Reitz <mreitz@redhat.com>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
If it returns an error, the migrated VM will not be started, but qemu
exits with an error message.
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Reviewed-by: Juan Quintela <quintela@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Benoit Canet <benoit@irqsave.net>
qcow2_open() causes writes when repairing an image with the dirty flag
set and when clearing autoclear flags. It shouldn't do this when another
qemu instance is still actively working on this image file.
One effect of the bug is that images may have a cleared dirty flag while
the migration source host still has it in use with lazy refcounts
enabled, so refcounts are not accurate and the dirty flag must remain
set.
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Instead of manually building a list of all options from BDRVQcowState
values just reuse the options that were used to open the image.
qcow2_open() won't fully use all of the options in the QDict, but that's
okay.
This fixes all of the driver-specific options in qcow2, except for
lazy-refcounts, which was special cased before.
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Reviewed-by: Max Reitz <mreitz@redhat.com>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
After migration has completed, we call bdrv_invalidate_cache() so that
drivers which cache some data drop their stale copy of the data and
reread it from the image file to get a new version of data that the
source modified while the migration was running.
Reloading metadata from the image file is useless, though, if the size
of the image file stays stale (this is a value that is cached for all
image formats in block.c). Reads from (meta)data after the old EOF
return only zeroes, causing image corruption.
We need to update bs->total_sectors in all layers that could potentially
have changed their size (i.e. backing files are not a concern - if they
are changed, we're in bigger trouble)
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Returning "Wrong medium type" for an image that does not have a valid
header is a bit weird. Improve the error by mentioning what format
was trying to open it.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Reviewed-by: Fam Zheng <famz@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Add the bdrv_open() option BDRV_O_PROTOCOL which results in passing the
call to bdrv_file_open(). Additionally, make bdrv_file_open() static and
therefore bdrv_open() the only way to call it.
Consequently, all existing calls to bdrv_file_open() have to be adjusted
to use bdrv_open() with the BDRV_O_PROTOCOL flag instead.
Signed-off-by: Max Reitz <mreitz@redhat.com>
Reviewed-by: Kevin Wolf <kwolf@redhat.com>
Reviewed-by: Benoit Canet <benoit@irqsave.net>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Allow bdrv_open() to handle references to existing block devices just as
bdrv_file_open() is already capable of.
Signed-off-by: Max Reitz <mreitz@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Make bdrv_open() take a pointer to a BDS pointer, similarly to
bdrv_file_open(). If a pointer to a NULL pointer is given, bdrv_open()
will create a new BDS with an empty name; if the BDS pointer is not
NULL, that existing BDS will be reused (in the same way as bdrv_open()
already did).
Signed-off-by: Max Reitz <mreitz@redhat.com>
Reviewed-by: Kevin Wolf <kwolf@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
error_is_set(&var) is the same as var != NULL, but it takes
whole-program analysis to figure that out. Unnecessarily hard for
optimizers, static checkers, and human readers. Dumb it down to
obvious.
Gets rid of several dozen Coverity false positives.
Note that the obvious form is already used in many places.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Andreas Färber <afaerber@suse.de>
Signed-off-by: Luiz Capitulino <lcapitulino@redhat.com>
In the case of a metadata preallocation with a large cluster size,
qcow2_alloc_cluster_offset() can allocate nothing and returns a
NULL l2meta. This patch checks for it and link2 l2 with only valid
l2meta.
Replace 9 and 512 with BDRV_SECTOR_BITS, BDRV_SECTOR_SIZE
respectively while at the function.
Signed-off-by: Hu Tao <hutao@cn.fujitsu.com>
Reviewed-by: Max Reitz <mreitz@redhat.com>
Reviewed-by: Benoit Canet <benoit@irqsave.net>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
n_start can be actually calculated from offset. The number of
sectors to be allocated(n_end - n_start) can be passed in in
num. By removing n_start and n_end, we can save two parameters.
The side effect is there is a bug in qcow2.c:preallocate() that
passes incorrect n_start to qcow2_alloc_cluster_offset() is
fixed. The bug can be triggerred by a larger cluster size than
the default value(65536), for example:
./qemu-img create -f qcow2 \
-o 'cluster_size=131072,preallocation=metadata' file.img 4G
Signed-off-by: Hu Tao <hutao@cn.fujitsu.com>
Reviewed-by: Max Reitz <mreitz@redhat.com>
Reviewed-by: Benoit Canet <benoit@irqsave.net>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
The QCOW2 .bdrv_make_empty implementation always returns 0 for success,
but does not actually do anything.
The proper way to not support an optional driver function stub is to
just not implement it, so let's remove the stub.
Signed-off-by: Jeff Cody <jcody@redhat.com>
Reviewed-by: Benoit Canet <benoit@irqsave.net>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
This function separates filling the BlockLimits from bdrv_open(), which
allows it to call it from other operations which may change the limits
(e.g. modifications to the backing file chain or bdrv_reopen)
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Reviewed-by: Max Reitz <mreitz@redhat.com>
Reviewed-by: Benoit Canet <benoit@irqsave.net>
Allow specifying a reference to an existing block device (by name) for
bdrv_file_open() instead of a filename and/or options.
Signed-off-by: Max Reitz <mreitz@redhat.com>
Reviewed-by: Kevin Wolf <kwolf@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
This is a boiler-plate _nofail variant of qemu_opts_create. Remove and
use error_abort in call sites.
null/0 arguments needs to be added for the id and fail_if_exists fields
in affected callsites due to argument inconsistency between the normal and
no_fail variants.
Signed-off-by: Peter Crosthwaite <peter.crosthwaite@xilinx.com>
Reviewed-by: Markus Armbruster <armbru@redhat.com>
Signed-off-by: Luiz Capitulino <lcapitulino@redhat.com>
Strictly speaking, this is only required for has_zero_init() == false,
but it's easy enough to just do a cluster-aligned write that is padded
with zeros after the header.
This fixes that after 'qemu-img create' header extensions are attempted
to be parsed that are really just random leftover data.
Cc: qemu-stable@nongnu.org
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Reviewed-by: Fam Zheng <famz@redhat.com>
Reviewed-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
This will let misaligned but large requests use zero clusters. This
is important because the cluster size is not guest visible.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Reviewed-by: Peter Lieven <pl@kamp.de>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
If you open an image temporarily just because you want to check its size
or get it flushed, there's no real reason to open the whole backing file
chain.
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Reviewed-by: Fam Zheng <famz@redhat.com>
Reviewed-by: Benoit Canet <benoit@irqsave.net>
Opening the qcow2 image with BDRV_O_NO_FLUSH prevents any flushes during
the image creation. This means that the image has not yet been flushed
to disk when qemu-img create exits. This flush is delayed until the next
operation on the image involving opening it without BDRV_O_NO_FLUSH and
closing (or directly flushing) it. For large images and/or images with a
small cluster size and preallocated metadata, this flush may take a
significant amount of time and may occur unexpectedly.
Reopening the image without BDRV_O_NO_FLUSH right before the end of
qcow2_create2() results in hoisting the potentially costly flush into
the image creation, which is expected to take some time (whereas
successive image operations may be not).
Signed-off-by: Max Reitz <mreitz@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Benoit Canet <benoit@irqsave.net>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Saving the VM state is done using bdrv_pwrite. This function may perform
a read-modify-write, which in this case results in data being read from
beyond the end of the virtual disk. Since we are actually trying to
access an area which is not a part of the virtual disk, zero_beyond_eof
has to be set to false before performing the partial write, otherwise
the VM state may become corrupted.
Signed-off-by: Max Reitz <mreitz@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Since df2a6f29a5, bdrv_co_do_writev increases the total_sectors value of
a growable block devices on writes after the current end. This leads to
the virtual disk apparently growing in qcow2_save_vmstate, which in turn
affects the disk size captured by the internal snapshot taken directly
afterwards through e.g. the HMP savevm command. Such a "grown" snapshot
cannot be loaded after reopening the qcow2 image, since its disk size
differs from the actual virtual disk size (writing a VM state does not
actually increase the virtual disk size).
Fix this by restoring total_sectors at the end of qcow2_save_vmstate.
Signed-off-by: Max Reitz <mreitz@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Evaluate the runtime overlap check options and set
BDRVQcowState.overlap_check appropriately.
Signed-off-by: Max Reitz <mreitz@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Add an array which assigns the option string to its corresponding
overlap check bit.
Signed-off-by: Max Reitz <mreitz@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Add runtime options to tune the overlap checks to be performed before
write accesses.
Signed-off-by: Max Reitz <mreitz@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Replace the QCOW2_OL_DEFAULT macro by a variable overlap_check in
BDRVQcowState.
Signed-off-by: Max Reitz <mreitz@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
In qcow2_check_metadata_overlap and qcow2_pre_write_overlap_check,
change the parameter signifying the checks to perform from its current
positive form to a negative one, i.e., it will no longer explicitly
specify every check to perform but rather a mask of checks not to
perform.
Signed-off-by: Max Reitz <mreitz@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
In qcow2_write_compressed, if the compression fails, a normal cluster is
written to disk. This is done through bdrv_write on the qcow2 BDS
itself (using the guest offset), thus it is wrong to do a metadata
overlap check before.
Signed-off-by: Max Reitz <mreitz@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
The error message in qcow2_downgrade about an unsupported refcount
order is missing a space. This patch adds it.
Signed-off-by: Max Reitz <mreitz@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Add a new ImageInfoSpecificQCow2 type as a subtype of ImageInfoSpecific.
This contains the compatibility level as a string and an optional
lazy_refcounts boolean (optional means mandatory for compat >= 1.1 and
not available for compat == 0.10).
Also, add qcow2_get_specific_info, which returns this information.
Signed-off-by: Max Reitz <mreitz@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
QCowHeader and QCowExtension are structs that reside in the on-disk
image format, and are read and written directly via bdrv_pread()/write(),
and as such should be packed to avoid any unintentional struct padding.
Signed-off-by: Jeff Cody <jcody@redhat.com>
Reviewed-by: Richard Henderson <rth@twiddle.net>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Add an Error ** parameter to bdrv_create and its associated functions to
allow more specific error messages.
Signed-off-by: Max Reitz <mreitz@redhat.com>
Add an Error ** parameter to bdrv_open, bdrv_file_open and associated
functions to allow more specific error messages.
Signed-off-by: Max Reitz <mreitz@redhat.com>
Add an Error ** parameter to BlockDriver.bdrv_open and
BlockDriver.bdrv_file_open to allow more specific error messages.
Signed-off-by: Max Reitz <mreitz@redhat.com>
Implement bdrv_amend_options for compat, size, backing_file, backing_fmt
and lazy_refcounts.
Downgrading images from compat=1.1 to compat=0.10 is achieved through
handling all incompatible flags accordingly, clearing all compatible and
autoclear flags and expanding all zero clusters.
Signed-off-by: Max Reitz <mreitz@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Save the image refcount order in BDRVQcowState. This will be relevant
for future code supporting different refcount orders than four and also
for code that needs to verify a certain refcount order for an opened
image.
Signed-off-by: Max Reitz <mreitz@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
During savevm, the VM state is written to the active L1 of the image and
then a snapshot is taken. After that, the VM state isn't needed any more
in the active L1 and should be discarded. This is implemented by this
patch.
The impact of not discarding the VM state is that a snapshot can never
become smaller than any previous snapshot (because it would be padded
with old VM state), and more importantly that future savevm operations
cause unnecessary COWs (with associated flushes), which makes subsequent
snapshots much slower.
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Reviewed-by: Max Reitz <mreitz@redhat.com>
The function will be used internally instead of only being called for
guest discard requests.
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Reviewed-by: Max Reitz <mreitz@redhat.com>
For now, bdrv_get_block_status is just another name for bdrv_is_allocated.
The next patches will add more flags.
This also touches all block drivers with a mostly mechanical rename. The
sole exception is cow; because it calls cow_co_is_allocated from the read
code, we keep that function and make cow_co_get_block_status a wrapper.
Reviewed-by: Eric Blake <eblake@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Some bdrv_is_allocated callers do not expect errors, but the fallback
in qcow2.c might make other callers trip on assertion failures or
infinite loops.
Fix the callers to always look for errors.
Cc: qemu-stable@nongnu.org
Reviewed-by: Eric Blake <eblake@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Manage BlockDriverState lifecycle with refcnt, so bdrv_delete() is no
longer public and should be called by bdrv_unref() if refcnt is
decreased to 0.
This is an identical change because effectively, there's no multiple
reference of BDS now: no caller of bdrv_ref() yet, only bdrv_new() sets
bs->refcnt to 1, so all bdrv_unref() now actually delete the BDS.
Signed-off-by: Fam Zheng <famz@redhat.com>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
If no corruptions remain after an image repair (and no errors have been
encountered), clear the corrupt flag in qcow2_check.
Signed-off-by: Max Reitz <mreitz@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
The pre-write overlap check function is now called before most of the
qcow2 writes (aborting it on collision or other error).
Signed-off-by: Max Reitz <mreitz@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
This adds an incompatible bit indicating corruption to qcow2. Any image
with this bit set may not be written to unless for repairing (and
subsequently clearing the bit if the repair has been successful).
Signed-off-by: Max Reitz <mreitz@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
By the time that qemu 1.7 will be released, enough time will have passed
since qemu 1.1, which is the first version to understand version 3
images, that changing the default shouldn't hurt many people any more
and the benefits of using the new format outweigh the pain.
qemu-iotests already runs with compat=1.1 by default.
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
In 4146b46c42e0989cb5842e04d88ab6ccb1713a48 (block: Produce zeros when
protocols reading beyond end of file), we break qemu-iotests ./check
-qcow2 022. This happens because qcow2 temporarily sets ->growable = 1
for vmstate accesses (which are stored beyond the end of regular image
data).
We introduce the bs->zero_beyond_eof to allow qcow2_load_vmstate() to
disable ->zero_beyond_eof temporarily in addition to enable ->growable.
[Since the broken patch "block: Produce zeros when protocols reading
beyond end of file" has not been merged yet, I have applied this fix
*first* and will then apply the next patch to keep the tree bisectable.
-- Stefan]
Suggested-by: Stefan Hajnoczi <stefanha@redhat.com>
Signed-off-by: Asias He <asias@redhat.com>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
By the time that qemu 1.7 will be released, enough time will have passed
since qemu 1.1, which is the first version to understand version 3
images, that changing the default shouldn't hurt many people any more
and the benefits of using the new format outweigh the pain.
qemu-iotests already runs with compat=1.1 by default.
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
This is what QMP wants to use. The options haven't been enabled in any
release yet, so we're still free to change them.
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
.has_zero_init defaults to 1 for all formats and protocols.
this is a dangerous default since this means that all
new added drivers need to manually overwrite it to 0 if
they do not ensure that a device is zero initialized
after bdrv_create().
if a driver needs to explicitly set this value to
1 its easier to verify the correctness in the review process.
during review of the existing drivers it turned out
that ssh and gluster had a wrong default of 1.
both protocols support host_devices as backend
which are not by default zero initialized. this
wrong assumption will lead to possible corruption
if qemu-img convert is used to write to such a backend.
vpc and vmdk also defaulted to 1 altough they support
fixed respectively flat extends. this has to be addresses
in separate patches. both formats as well as the mentioned
ssh and gluster are turned to the default of 0 with this
patch for safety.
a similar problem with the wrong default existed for
iscsi most likely because the driver developer did
oversee the default value of 1.
Signed-off-by: Peter Lieven <pl@kamp.de>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
This optimises the discard operation for freed clusters by batching
discard requests (both snapshot deletion and bdrv_discard end up
updating the refcounts cluster by cluster).
Note that we don't discard asynchronously, but keep s->lock held. This
is to avoid that a freed cluster is reallocated and written to while the
discard is still in flight.
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Deleted snapshots are discarded in the image file by default, discard
requests take their default from the -drive discard=... option and other
places that free clusters must always be enabled explicitly.
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
This adds a refcount update reason to all callers of update_refcounts(),
so that a follow-up patch can use this information to decide whether
clusters that reach a refcount of 0 should be discarded in the image
file.
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
This catches the situation that is described in the bug report at
https://bugs.launchpad.net/qemu/+bug/865518 and goes like this:
$ qemu-img create -f qcow2 huge.qcow2 $((1024*1024))T
Formatting 'huge.qcow2', fmt=qcow2 size=1152921504606846976 encryption=off cluster_size=65536 lazy_refcounts=off
$ qemu-io /tmp/huge.qcow2 -c "write $((1024*1024*1024*1024*1024*1024 - 1024)) 512"
Segmentation fault
With this patch applied the segfault will be avoided, however the case
will still fail, though gracefully:
$ qemu-img create -f qcow2 /tmp/huge.qcow2 $((1024*1024))T
Formatting 'huge.qcow2', fmt=qcow2 size=1152921504606846976 encryption=off cluster_size=65536 lazy_refcounts=off
qemu-img: The image size is too large for file format 'qcow2'
Note that even long before these overflow checks kick in, you get
insanely high memory usage (up to INT_MAX * sizeof(uint64_t) = 16 GB for
the L1 table), so with somewhat smaller image sizes you'll probably see
qemu aborting for a failed g_malloc().
If you need huge image sizes, you should increase the cluster size to
the maximum of 2 MB in order to get higher limits.
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Compression in qcow2 requires image length to be a multiple of the
cluster size. Lift this requirement by zero-padding the final cluster
when necessary. The virtual disk size is still not cluster-aligned, so
the guest cannot access the zero sectors.
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Directly pass the QEMUIOVector on instead of linearising it.
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Move aes.h from include/block to include/qemu to show it can be reused
by other subsystems.
Cc: Kevin Wolf <kwolf@redhat.com>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Reviewed-by: Edgar E. Iglesias <edgar.iglesias@gmail.com>
Reviewed-by: Richard Henderson <rth@twiddle.net>
Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
Instead of expecting a single l2meta, have a list of them. This allows
to still have a single I/O request for the guest data, even though
multiple l2meta may be needed in order to describe both a COW overwrite
and a new cluster allocation (typical sequential write case).
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
The unlock wakes up the next coroutine, but the currently running
coroutine will lock it again before it yields, so this doesn't make a
lot of sense.
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Need to pass an options QDict to qcow2_open() now. This fixes a segfault
on the migration target with qcow2.
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Otherwise, live migration of the top layer will miss zero clusters and
let the backing file show through. This also matches what is done in qed.
QCOW2_CLUSTER_ZERO clusters are invalid in v2 image files. Check this
directly in qcow2_get_cluster_offset instead of replicating the test
everywhere.
Cc: qemu-stable@nongnu.org
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
qcow2 images now accept a boolean lazy_refcounts options. Use it like
this:
-drive file=test.qcow2,lazy_refcounts=on
If the option is specified on the command line, it overrides the default
specified by the qcow2 header flags that were set when creating the
image.
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
It doesn't do anything yet except storing the options QDict in the
BlockDriverState.
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
This improves error reports for bochs, cow, qcow, qcow2, qed and vmdk
when a file with the wrong format is selected.
Signed-off-by: Stefan Weil <sw@weilnetz.de>
Reviewed-by: Eric Blake <eblake@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
One of the recent refactoring patches (commit f50f88b9) didn't take care
to initialise l2meta properly, so with zero-length writes, which don't
even enter the write loop, qemu just segfaulted.
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>