Since commit a7aae221 ('Switch SIG_IPI to SIGUSR1'), SIGUSR1 is blocked
during startup, breaking the progress report in tools.
This patch reenables the signal when initialising a progress report.
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Reviewed-by: Benoit Canet <benoit@irqsave.net>
This function basically parses command-line options given as a QDict
replacing a config file.
For instance, the QDict {"section.opt1": 42, "section.opt2": 23}
corresponds to the config file:
[section]
opt1 = 42
opt2 = 23
It is possible to specify multiple sections and also multiple sections
of the same type. On the command line, this looks like the following:
inject-error.0.event=reftable_load,\
inject-error.1.event=l2_load,\
set-state.event=l1_update
This would correspond to the following config file:
[inject-error "inject-error.0"]
event = reftable_load
[inject-error "inject-error.1"]
event = l2_load
[set-state]
event = l1_update
Signed-off-by: Max Reitz <mreitz@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Using stdin with readline.c requires disabling echo and line buffering.
Add a portable wrapper to set the terminal attributes under Linux and
Windows.
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Now that the monitor and readline are decoupled, readline.h no longer
belongs in include/monitor/. Put the header into include/qemu/.
Move the source file into util/ so it can be linked as part of
libqemuutil.a.
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
This reverts commit d32934c84c.
The original implementation before this patch makes abortive error
messages much more friendly. The underlying bug that required this
change is now fixed. Revert.
Signed-off-by: Peter Crosthwaite <peter.crosthwaite@xilinx.com>
Signed-off-by: Edgar E. Iglesias <edgar.iglesias@xilinx.com>
Use fprintf(stderr instead. This removes dependency of libqemuutil.a
on the monitor.
We can further justify this change, in that this code path should only
trigger under a fatal error condition. fprintf-stderr is probably the
appropriate medium as under a fatal error conidition the monitor itself
may be down and out for the count. So assertion failure messages should
go lowest common denominator - straight to stderr.
Fixes the build as reported by Kevin Wolf. Issue debugged and change
suggested by Luiz Capitulino. Issue introduced by
5d24ee70bc.
Signed-off-by: Peter Crosthwaite <peter.crosthwaite@xilinx.com>
Reviewed-by: Edgar E. Iglesias <edgar.iglesias@xilinx.com>
Signed-off-by: Edgar E. Iglesias <edgar.iglesias@xilinx.com>
Move index and size fields from int to long. We need that for
migration. long is 64 bits on sane architectures, and 32bits should
be enough on all the 32bits architectures.
Signed-off-by: Juan Quintela <quintela@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Orit Wasserman <owasserm@redhat.com>
This is a boiler-plate _nofail variant of qemu_opts_create. Remove and
use error_abort in call sites.
null/0 arguments needs to be added for the id and fail_if_exists fields
in affected callsites due to argument inconsistency between the normal and
no_fail variants.
Signed-off-by: Peter Crosthwaite <peter.crosthwaite@xilinx.com>
Reviewed-by: Markus Armbruster <armbru@redhat.com>
Signed-off-by: Luiz Capitulino <lcapitulino@redhat.com>
Add a special Error * that can be passed to error handling APIs to
signal that any errors are fatal and should abort QEMU. There are two
advantages to this:
- allows for brevity when wishing to assert success of Error **
accepting APIs. No need for this pattern:
Error * local_err = NULL;
api_call(foo, bar, &local_err);
assert_no_error(local_err);
This also removes the need for _nofail variants of APIs with
asserting call sites now reduced to 1LOC.
- SIGABRT happens from within the offending API. When a fatal error
occurs in an API call (when the caller is asserting sucess) failure
often means the API itself is broken. With the abort happening in the
API call now, the stack frames into the call are available at debug
time. In the assert_no_error scheme the abort happens after the fact.
The exact semantic is that when an error is raised, if the argument
Error ** matches &error_abort, then the abort occurs immediately. The
error messaged is reported.
For error_propagate, if the destination error is &error_abort, then
the abort happens at propagation time.
Signed-off-by: Peter Crosthwaite <peter.crosthwaite@xilinx.com>
Reviewed-by: Markus Armbruster <armbru@redhat.com>
Signed-off-by: Luiz Capitulino <lcapitulino@redhat.com>
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1.4.15 (GNU/Linux)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=uEdP
-----END PGP SIGNATURE-----
Merge remote-tracking branch 'kwolf/tags/for-anthony' into staging
Block patches for 2.0 (flushing block-next)
# gpg: Signature made Fri 29 Nov 2013 08:43:18 AM PST using RSA key ID C88F2FD6
# gpg: Can't check signature: public key not found
# By Peter Lieven (17) and others
# Via Kevin Wolf
* kwolf/tags/for-anthony: (41 commits)
qemu-iotests: Add sample image and test for VMDK version 3
vmdk: Allow read only open of VMDK version 3
qemu-iotests: Filter out 'qemu-io> ' prompt
qemu-iotests: Filter qemu-io output in 025
block: Use BDRV_O_NO_BACKING where appropriate
qemu-iotests: Test snapshot mode
block: Enable BDRV_O_SNAPSHOT with driver-specific options
qemu-iotests: Make test case 030, 040 and 055 deterministic
qemu-iotest: Add pause_drive and resume_drive methods
blkdebug: add "remove_break" command
qemu-iotests: Drop local version of cancel_and_wait from 040
sheepdog: support user-defined redundancy option
sheepdog: refactor do_sd_create()
qdict: Optimise qdict_do_flatten()
qdict: Fix memory leak in qdict_do_flatten()
MAINTAINERS: add sheepdog development mailing list
COW: Extend checking allocated bits to beyond one sector
COW: Speed up writes
qapi: Change BlockDirtyInfo to list
block: per caller dirty bitmap
...
Message-id: 1385743555-27888-1-git-send-email-kwolf@redhat.com
Signed-off-by: Anthony Liguori <aliguori@amazon.com>
With this we no longer pass down envp, and thus all systems can have
the same void prototype. So also eliminate a useless thunk.
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Richard Henderson <rth@twiddle.net>
There may be calls to error_setg() and especially error_setg_errno()
which blindly (and until now wrongly) assume these functions not to
clobber errno (e.g., they pass errno to error_setg_errno() and return
-errno afterwards). Instead of trying to find and fix all of these
constructs, just make sure error_setg() and error_setg_errno() indeed do
not clobber errno.
Suggested-by: Eric Blake <eblake@redhat.com>
Signed-off-by: Max Reitz <mreitz@redhat.com>
Reviewed-by: Benoit Canet <benoit@irqsave.net
Reviewed-by: Eric Blake <eblake@redhat.com>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Currently we have three QemuOptsList (qemu_common_drive_opts,
qemu_legacy_drive_opts, and qemu_drive_opts), only qemu_drive_opts
is added to vm_config_groups[].
This patch changes query-command-line-options to access three local
QemuOptsLists for drive option, and merge the description items
together.
Signed-off-by: Amos Kong <akong@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
This emulates Win32 manual-reset events using futexes or conditional
variables. Typical ways to use them are with multi-producer,
single-consumer data structures, to test for a complex condition whose
elements come from different threads:
for (;;) {
qemu_event_reset(ev);
... test complex condition ...
if (condition is true) {
break;
}
qemu_event_wait(ev);
}
Or more efficiently (but with some duplication):
... evaluate condition ...
while (!condition) {
qemu_event_reset(ev);
... evaluate condition ...
if (!condition) {
qemu_event_wait(ev);
... evaluate condition ...
}
}
QemuEvent provides a very fast userspace path in the common case when
no other thread is waiting, or the event is not changing state.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
qemu_thread_create already does signal blocking and detaching for us.
Signed-off-by: Jan Kiszka <jan.kiszka@siemens.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
blockdev-add shouldn't automatically generate IDs, but will keep most of
the DriveInfo creation code.
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Reviewed-by: Max Reitz <mreitz@redhat.com>
Reviewed-by: Wenchao Xia <xiawenc@linux.vnet.ibm.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
# By Stefan Weil (5) and others
# Via Michael Tokarev
* mjt/trivial-patches:
migration: Fix compiler warning ('caps' may be used uninitialized)
util/path: Fix type which is longer than 8 bit for MinGW
hw/9pfs: Fix errno value for xattr functions
vl: Clean up unnecessary boot_order complications
qemu-char: Fix potential out of bounds access to local arrays
pci-ohci: Add missing 'break' in ohci_service_td
sh4: Fix serial line access for Linux kernels later than 3.2
hw/alpha: Fix compiler warning (integer constant is too large)
target-i386: Fix compiler warning (integer constant is too large)
block: Remove unused assignment (fixes warning from clang)
exec: cleanup DEBUG_SUBPAGE
tests: Fix schema parser test for in-tree build
tests: Update .gitignore for test-int128 and test-bitops
.gitignore: ignore tests/qemu-iotests/socket_scm_helper
Message-id: 1381051979-25742-1-git-send-email-mjt@msgid.tls.msk.ru
Signed-off-by: Anthony Liguori <anthony@codemonkey.ws>
While dirent->d_type is 8 bit for most systems, it is 32 bit for MinGW.
Reducing it to 8 bit results in a compiler warning because the macro
is_dir_maybe compares that 8 bit value with 32 bit constants.
Using 'unsigned' instead of 'unsigned char' matches the declaration for
MinGW and does not harm the other systems.
MinGW-w64 is not affected: it does not declare d_type.
Signed-off-by: Stefan Weil <sw@weilnetz.de>
Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
SO_REUSEADDR should be avoided on Windows but is desired on other operating
systems. So instead of setting it we call socket_set_fast_reuse that will result
in the appropriate behaviour on all operating systems.
Signed-off-by: Sebastian Ottlik <ottlik@fzi.de>
Reviewed-by: Eric Blake <eblake@redhat.com>
Signed-off-by: Stefan Weil <sw@weilnetz.de>
If a socket is closed it remains in TIME_WAIT state for some time. On operating
systems using BSD sockets the endpoint of the socket may not be reused while in
this state unless SO_REUSEADDR was set on the socket. On windows on the other
hand the default behaviour is to allow reuse (i.e. identical to SO_REUSEADDR on
other operating systems) and setting SO_REUSEADDR on a socket allows it to be
bound to a endpoint even if the endpoint is already used by another socket
independently of the other sockets state. This can even result in undefined
behaviour.
Many sockets used by QEMU should not block the use of their endpoint after being
closed while they are still in TIME_WAIT state. Currently QEMU sets SO_REUSEADDR
for such sockets, which can lead to problems on Windows. This patch introduces
the function socket_set_fast_reuse that should be used instead of setting
SO_REUSEADDR when fast socket reuse is desired and behaves correctly on all
operating systems.
As a failure of this function can only be caused by bad QEMU internal errors, an
assertion handles these situations. The return value is still passed on, to
minimize changes in client code and prevent unused variable warnings if NDEBUG
is defined.
Signed-off-by: Sebastian Ottlik <ottlik@fzi.de>
Reviewed-by: Eric Blake <eblake@redhat.com>
Signed-off-by: Stefan Weil <sw@weilnetz.de>
# By Stefan Hajnoczi (4) and others
# Via Stefan Hajnoczi
* stefanha/block:
virtio-blk: do not relay a previous driver's WCE configuration to the current
blockdev: do not default cache.no-flush to true
block: don't lose data from last incomplete sector
qcow2: Correct snapshots size for overlap check
coroutine: fix /perf/nesting coroutine benchmark
coroutine: add qemu_coroutine_yield benchmark
qemu-timer: do not take the lock in timer_pending
qemu-timer: make qemu_timer_mod_ns() and qemu_timer_del() thread-safe
qemu-timer: drop outdated signal safety comments
osdep: warn if open(O_DIRECT) on fails with EINVAL
libcacard: link against qemu-error.o for error_report()
Message-id: 1379698931-946-1-git-send-email-stefanha@redhat.com
Print a warning when opening a file O_DIRECT fails with EINVAL. This
saves users a lot of time trying to figure out the EINVAL error, which
is typical when attempting to open a file O_DIRECT on Linux tmpfs.
Reported-by: Deepak C Shetty <deepakcs@linux.vnet.ibm.com>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
We abort() on memory allocation failure. abort() is appropriate for
programming errors. Maybe most memory allocation failures are
programming errors, maybe not. But guest memory allocation failure
isn't, and aborting when the user asks for more memory than we can
provide is not nice. exit(1) instead, and do it in just one place, so
the error message is consistent.
Tested-by: Christian Borntraeger <borntraeger@de.ibm.com>
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Andreas Färber <afaerber@suse.de>
Acked-by: Laszlo Ersek <lersek@redhat.com>
Acked-by: Stefano Stabellini <stefano.stabellini@eu.citrix.com>
Acked-by: Christian Borntraeger <borntraeger@de.ibm.com>
Message-id: 1375276272-15988-8-git-send-email-armbru@redhat.com
Signed-off-by: Anthony Liguori <anthony@codemonkey.ws>
# By Tomoki Sekiyama (10) and Paul Burton (1)
# Via Michael Roth
* mdroth/qga-pull-2013-9-9:
QMP/qemu-ga-client: Make timeout longer for guest-fsfreeze-freeze command
qemu-ga: Install Windows VSS provider on `qemu-ga -s install'
qemu-ga: Call Windows VSS requester in fsfreeze command handler
qemu-ga: Add Windows VSS provider and requester as DLL
error: Add error_set_win32 and error_setg_win32
qemu-ga: Add configure options to specify path to Windows/VSS SDK
Add a script to extract VSS SDK headers on POSIX system
checkpatch.pl: Check .cpp files
Add c++ keywords to QAPI helper script
configure: Support configuring C++ compiler
mips_malta: support up to 2GiB RAM
Message-id: 1378755701-2051-1-git-send-email-mdroth@linux.vnet.ibm.com
Signed-off-by: Anthony Liguori <anthony@codemonkey.ws>
These functions help maintaining homogeneous formatting of error messages
with Windows error code and description (generated by
g_win32_error_message()).
Signed-off-by: Tomoki Sekiyama <tomoki.sekiyama@hds.com>
Reviewed-by: Michael Roth <mdroth@linux.vnet.ibm.com>
Signed-off-by: Michael Roth <mdroth@linux.vnet.ibm.com>
Implement the continuous leaky bucket algorithm devised on IRC as a separate
module.
Signed-off-by: Benoit Canet <benoit@irqsave.net>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Adds an "assigned" flag to QEMUOptionParameter which is cleared at the
beginning of parse_option_parameters and set on (successful)
set_option_parameter and set_option_parameter_int.
Signed-off-by: Max Reitz <mreitz@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Commit 6d4cd40 fixed qemu_opts_set_defaults() for an existing corner
case, but broke it for another one that can't be reached in current
code.
Quote from its commit message:
I believe [opts_parse()] attempts to do the following:
If options don't yet exist, create new options
Else, if defaults, modify the existing options
Else, if list->merge_lists, modify the existing options
Else, fail
The only caller that passes true for defaults is
qemu_opts_set_defaults().
The commit message then claims:
A straightforward call of qemu_opts_create() does exactly that.
Wrong. When !list->merge_lists, and the option string doesn't contain
id=, and options without ID exist, then we don't actually modify the
existing options, we create new ones.
Not reachable, because we never pass lists with !list->merge_lists to
qemu_opts_set_defaults().
Guard against possible (if unlikely) future misuse with assert().
Reported-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Message-id: 1375428840-5275-1-git-send-email-armbru@redhat.com
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
Without this patch, iov_send_recv() never returns when do_send_recv()
returns zero.
Signed-off-by: MORITA Kazutaka <morita.kazutaka@lab.ntt.co.jp>
Reviewed-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Fix following bugs in "fallback implementation of counting semaphores
with mutex+condvar" added in c166cb72f1676855816340666c3b618beef4b976:
- waiting threads are not restarted properly if more than one threads
are waiting unblock signals in qemu_sem_timedwait()
- possible missing pthread_cond_signal(3) calls when waiting threads
are returned by ETIMEDOUT
- fix an uninitialized variable
The problem is analyzed by and fix is provided by Noriyuki Soda.
Also put additional cleanup suggested by Laszlo Ersek:
- make QemuSemaphore.count unsigned (it won't be negative)
- check a return value of in pthread_cond_wait() in qemu_sem_wait()
Signed-off-by: Izumi Tsutsui <tsutsui@ceres.dti.ne.jp>
Reviewed-by: Laszlo Ersek <lersek@redhat.com>
Message-id: 1372841894-10634-1-git-send-email-tsutsui@ceres.dti.ne.jp
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
This patch adds a 'SIZE' type property to qdev.
Signed-off-by: Ian Molton <ian.molton@collabora.co.uk>
Signed-off-by: Vasilis Liaskovitis <vasilis.liaskovitis@profitbricks.com>
Signed-off-by: Hu Tao <hutao@cn.fujitsu.com>
Signed-off-by: Igor Mammedov <imammedo@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Reviewed-by: Andreas Färber <afaerber@suse.de>
Message-id: 1375109277-25561-7-git-send-email-imammedo@redhat.com
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
The current code includes assert.h very early (from qemu-common.h),
so the definition of NDEBUG was without any effect.
In the initial version from 2004, NDEBUG was used to disable the assertions.
Those assertions are not in time critical code, so it is no longer
reasonable to disable them and the definition of NDEBUG can be removed.
Type u16 is also unused and therefore does not need a type definition.
Signed-off-by: Stefan Weil <sw@weilnetz.de>
Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
[Issue]
When we offer a customer support service and a problem happens
in a customer's system, we try to understand the problem by
comparing what the customer reports with message logs of the
customer's system.
In this case, we often need to know when the problem happens.
But, currently, there is no timestamp in qemu's error messages.
Therefore, we may not be able to understand the problem based on
error messages.
[Solution]
Add a timestamp to qemu's error message logged by
error_report() with g_time_val_to_iso8601().
Signed-off-by: Seiji Aguchi <seiji.aguchi@hds.com>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Signed-off-by: Luiz Capitulino <lcapitulino@redhat.com>
Commit 4f6dd9a changed the initialization of opts in opts_parse() to
this:
if (defaults) {
if (!id && !QTAILQ_EMPTY(&list->head)) {
opts = qemu_opts_find(list, NULL);
} else {
opts = qemu_opts_create(list, id, 0);
}
} else {
opts = qemu_opts_create(list, id, 1);
}
Same as before for !defaults.
If defaults is true, and params has no ID, and options exist, we use
the first assignment. It sets opts to null if all options have an ID.
opts_parse() then returns null. qemu_opts_set_defaults() asserts the
value is non-null. It's the only caller that passes true for
defaults.
To reproduce, try "-M xenpv -machine id=foo" (yes, "id=foo" is silly,
but it shouldn't crash).
I believe the function attempts to do the following:
If options don't yet exist, create new options
Else, if defaults, modify the existing options
Else, if list->merge_lists, modify the existing options
Else, fail
A straightforward call of qemu_opts_create() does exactly that.
Cc: Jan Kiszka <jan.kiszka@siemens.com>
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Message-id: 1372943363-24081-3-git-send-email-armbru@redhat.com
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
Crashes when the first list member has an ID. Admittedly nonsensical
reproducer:
$ qemu-system-x86_64 -nodefaults -machine id=foo -machine ""
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Message-id: 1372943363-24081-2-git-send-email-armbru@redhat.com
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
notifier_list_notify() has no return value. This is fine when we just
want to invoke side-effects.
Sometimes it's useful for notifiers to produce a return value. This
allows notifiers to "veto" an operation and will be used by the block
layer before-write notifier.
Reviewed-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Kevin Wolf <kwolf@redhat.com>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Watch this:
$ upstream-qemu -nodefaults -S -vnc :0,acl,sasl -monitor stdio
QEMU 1.5.50 monitor - type 'help' for more information
(qemu) acl_add vnc.username drei allow
acl: added rule at position 1
(qemu) acl_show vnc.username
policy: deny
1: allow drei
(qemu) acl_add vnc.username zwei allow 1
acl: added rule at position 2
(qemu) acl_show vnc.username
policy: deny
1: allow drei
2: allow zwei
(qemu) acl_add vnc.username eins allow 1
acl: added rule at position 1
(qemu) acl_show vnc.username
policy: deny
1: allow eins
2: allow drei
3: allow zwei
The second acl_add inserts at position 2 instead of 1.
Root cause is an off-by-one in qemu_acl_insert(): when index ==
acl->nentries, it appends instead of inserting before the last list
element.
Cc: qemu-stable@nongnu.org
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Michael Roth <mdroth@linux.vnet.ibm.com>
Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Anthony Liguori <aliguori@us.ibm.com>
Message-id: 1371208516-7857-3-git-send-email-armbru@redhat.com
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
According to RFC 1123 [1], hostnames can start with a digit too.
[1] http://tools.ietf.org/html/rfc1123#page-13
Signed-off-by: Ján Tomko <jtomko@redhat.com>
Cc: qemu-stable@nongnu.org
[Use strspn, not strcspn. - Paolo]
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
In two places qemu uses openpty() which is very system-dependent,
and in both places the pty is switched to raw mode as well.
Make a wrapper function which does both steps, and move all the
system-dependent complexity into a separate file, together
with static/local implementations of openpty() and cfmakeraw()
from qemu-char.c.
It is in a separate file, not part of oslib-posix.c, because
openpty() often resides in -lutil which is not linked to
every program qemu builds.
This change removes #including of <pty.h>, <termios.h>
and other rather specific system headers out of qemu-common.h,
which isn't a place for such specific headers really.
This version has been verified to build correctly on Linux,
OpenBSD, FreeBSD and OpenIndiana. On the latter it lets qemu
to be built with gtk gui which were not possible there due to
missing openpty() and cfmakeraw().
Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
Tested-by: Andreas Färber <andreas.faerber@web.de>
This function returns ${prefix}/var/RELATIVE_PATHNAME on POSIX-y systems,
and <CSIDL_COMMON_APPDATA>/RELATIVE_PATHNAME on Win32.
http://msdn.microsoft.com/en-us/library/bb762494.aspx
[...] This folder is used for application data that is not user
specific. For example, an application can store a spell-check
dictionary, a database of clip art, or a log file in the
CSIDL_COMMON_APPDATA folder. [...]
Signed-off-by: Laszlo Ersek <lersek@redhat.com>
Signed-off-by: Michael Roth <mdroth@linux.vnet.ibm.com>
On FreeBSD libutil is used for openpty(), but it also provides a hexdump()
which conflicts with QEMU's.
Signed-off-by: Ed Maste <emaste@freebsd.org>
Reviewed-by: Paolo Bonzini <pbonzini@redhat.com>
Message-id: 1368718348-15199-1-git-send-email-emaste@freebsd.org
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
We switched from qemu_memalign to mmap() but then we don't modify
qemu_vfree() to do a munmap() over free(). Which we cannot do
because qemu_vfree() frees memory allocated by qemu_{mem,block}align.
Introduce a new function that does the munmap(), luckily the size is
available in the RAMBlock.
Reported-by: Amos Kong <akong@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Reviewed-by: Amos Kong <akong@redhat.com>
Message-id: 1368454796-14989-3-git-send-email-pbonzini@redhat.com
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
This is preparatory to the introduction of a separate freeing API.
Reported-by: Amos Kong <akong@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Reviewed-by: Amos Kong <akong@redhat.com>
Message-id: 1368454796-14989-2-git-send-email-pbonzini@redhat.com
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
This adds the Castagnoli CRC32C algorithm, using the 0x11EDC6F41
polynomial.
This is extracted from the linux kernel cryptographic crc32.c module.
The algorithm is based on:
Castagnoli93: Guy Castagnoli and Stefan Braeuer and Martin Herrman
"Optimization of Cyclic Redundancy-Check Codes with 24
and 32 Parity Bits", IEEE Transactions on Communication,
Volume 41, Number 6, June 1993
Signed-off-by: Jeff Cody <jcody@redhat.com>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Commit e9d8fbf (qemu-file: do not use stdio for qemu_fdopen, 2013-03-27)
introduced a usage of writev, which mingw32 does not have. Even though
qemu_fdopen itself is not used on mingw32, the future-proof solution is
to add an implementation of it. This is simple and similar to how we
emulate sendmsg/recvmsg in util/iov.c.
Some files include osdep.h without qemu-common.h, so move the definition
of iovec to osdep.h too, and include osdep.h from qemu-common.h
unconditionally (protection against including files when NEED_CPU_H is
defined is not needed since the removal of AREG0).
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Libvirt has no way to probe if an option or property is supported,
This patch introduces a new qmp command to query command line
option information. hmp command isn't added because it's not needed.
Signed-off-by: Amos Kong <akong@redhat.com>
CC: Luiz Capitulino <lcapitulino@redhat.com>
CC: Osier Yang <jyang@redhat.com>
CC: Anthony Liguori <aliguori@us.ibm.com>
Signed-off-by: Luiz Capitulino <lcapitulino@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Introduces a new utility function: parse_debug_env to avoid code
duplication.
This overrides whatever debug value is set on the corresponding devices
from the command line, and is meant to ease the usage with any
management stack. For libvirt you can set environment variables by
extending the dom namespace, i.e:
<domain type='kvm' id='3' xmlns:qemu='http://libvirt.org/schemas/domain/qemu/1.0'>
<qemu:commandline>
<qemu:env name='QEMU_CCID_PASSTHRU_DEBUG' value='4'/>
<qemu:env name='QEMU_CCID_DEBUG' value='4'/>
</qemu:commandline>
</domain>
Signed-off-by: Alon Levy <alevy@redhat.com>
Reviewed-by: Marc-André Lureau <mlureau@redhat.com>
vscclient needs to call socket_init() for portability.
Moving to osdep.c since it has no internal dependency.
Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Reviewed-by: Alon Levy <alevy@redhat.com>
Partial writes can still happen in sendmsg and recvmsg, if a
signal is received in the middle of a write. To handle this,
retry the operation with a new offset/bytes pair.
Reviewed-by: Juan Quintela <quintela@redhat.com>
Reviewed-by: Orit Wassermann <owasserm@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
"si" and "ei" are merged in a single variable.
Reviewed-by: Juan Quintela <quintela@redhat.com>
Reviewed-by: Orit Wassermann <owasserm@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Do not touch the "bytes" argument anymore. Instead, remember the
original length of the last iovec if we touch it, and restore it
afterwards.
This requires undoing the changes in opposite order. The previous
algorithm didn't care.
Reviewed-by: Juan Quintela <quintela@redhat.com>
Reviewed-by: Orit Wassermann <owasserm@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Once the initial part of the iov is dropped, it is not used anymore.
Modify iov/iovcnt directly instead of adjusting them with the "si"
variable.
Reviewed-by: Juan Quintela <quintela@redhat.com>
Reviewed-by: Orit Wassermann <owasserm@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Using qemu_memalign only leaves the RAM zero by chance, because libc
will usually use mmap to satisfy our huge requests. But memory will
not be zero when using MALLOC_PERTURB_ with a nonzero value. In the
case of incoming migration, this breaks a recently-introduced
invariant (commit f1c7279, migration: do not sent zero pages in
bulk stage, 2013-03-26).
To fix this, use mmap ourselves to get a well-aligned, always zero
block for the RAM. Mmap-ed memory is easy to "trim" at the sides.
This also removes the need to do something special on valgrind
(see commit c2a8238a, Support running QEMU on Valgrind, 2011-10-31),
thus effectively reverts that patch.
Reviewed-by: Juan Quintela <quintela@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Reviewed-by: Markus Armbruster <armbru@redhat.com>
Message-id: 1365522223-20153-1-git-send-email-pbonzini@redhat.com
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
Remove static attribute to Td[0-5] and Te[0-5] tables so that they
can be used outside of aes.c. Change their type from u32 to uint32_t,
to keep the u32 udef local to aes.c. Prefix them with AES_ so that they
do not conflict with other symbols.
Reviewed-by: Edgar E. Iglesias <edgar.iglesias@gmail.com>
Reviewed-by: Richard Henderson <rth@twiddle.net>
Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
Move aes.h from include/block to include/qemu to show it can be reused
by other subsystems.
Cc: Kevin Wolf <kwolf@redhat.com>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Reviewed-by: Edgar E. Iglesias <edgar.iglesias@gmail.com>
Reviewed-by: Richard Henderson <rth@twiddle.net>
Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
Allow the clock_gettime() code using monotonic clock to be utilized on
more POSIX compliannt OS's. This started as a fix for OpenBSD which was
listed in one function as part of the previous hard coded list of OS's
for the functions to support but not in the other.
Signed-off-by: Brad Smith <brad@comstyle.com>
Reviewed-by: Paolo Bonzini <pbonzini@redhat.com>
Message-id: 20130405003748.GH884@rox.home.comstyle.com
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
socket_connect() sets non-blocking on TCP or UNIX domain sockets if a
callback function is passed. Do the same for file descriptor passing,
otherwise we could unexpectedly be using a blocking file descriptor.
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Signed-off-by: Luiz Capitulino <lcapitulino@redhat.com>
The fcntl(fd, F_SETFL, O_NONBLOCK) flag is not specific to sockets.
Rename to qemu_set_nonblock() just like qemu_set_cloexec().
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Signed-off-by: Luiz Capitulino <lcapitulino@redhat.com>
this patch adopts the loop unrolling idea of bitmap_is_zero() to
speed up the skipping of large areas with zeros in find_next_bit().
this routine is extensively used to find dirty pages in
live migration.
testing only the find_next_bit performance on a zeroed bitfield
the loop onrolling decreased executing time by approx. 50% on x86_64.
Signed-off-by: Peter Lieven <pl@kamp.de>
Signed-off-by: Juan Quintela <quintela@redhat.com>
performance gain on SSE2 is approx. 20-25%. altivec
is not tested. performance for unsigned long arithmetic
is unchanged.
Signed-off-by: Peter Lieven <pl@kamp.de>
Reviewed-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Orit Wasserman <owasserm@redhat.com>
Signed-off-by: Juan Quintela <quintela@redhat.com>
this adds buffer_find_nonzero_offset() which is a SSE2/Altivec
optimized function that searches for non-zero content in a
buffer.
the function starts full unrolling only after the first few chunks have
been checked one by one. analyzing real memory page data has revealed
that non-zero pages are non-zero within the first 256-512 bits in
most cases. as this function is also heavily used to check for zero memory
pages this tweak has been made to avoid the high setup costs of the fully
unrolled check for non-zero pages.
due to the optimizations used in the function there are restrictions
on buffer address and search length. the function
can_use_buffer_find_nonzero_content() can be used to check if
the function can be used safely.
Signed-off-by: Peter Lieven <pl@kamp.de>
Signed-off-by: Juan Quintela <quintela@redhat.com>
# By Kevin Wolf (12) and Peter Lieven (2)
# Via Kevin Wolf
* kwolf/for-anthony:
nbd: Check against invalid option combinations
nbd: Use default port if only host is specified
block: Allow omitting the file name when using driver-specific options
block: Make find_image_format safe with NULL filename
block: Rename variable to avoid shadowing
block: Introduce .bdrv_parse_filename callback
nbd: Accept -drive options for the network connection
nbd: Remove unused functions
nbd: Keep hostname and port separate
qemu-socket: Make socket_optslist public
block: Pass bdrv_file_open() options to block drivers
block: Add options QDict to bdrv_file_open() prototypes
block: complete all IOs before resizing a device
Revert "block: complete all IOs before .bdrv_truncate"
The NBD block supports an URL syntax, for which a URL parser returns
separate hostname and port fields. It also supports the traditional qemu
syntax encoded in a filename. Until now, after parsing the URL to get
each piece of information, a new string is built to be fed to socket
functions.
Instead of building a string in the URL case that is immediately parsed
again, parse the string in both cases and use the QemuOpts interface to
qemu-sockets.c.
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Allow other users to create the QemuOpts needed for inet_connect_opts().
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Instead of adding missing type casts which are needed by MinGW for the
4th argument, the patch uses qemu_setsockopt which was invented for this
purpose.
Signed-off-by: Stefan Weil <sw@weilnetz.de>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Factor out the hexdumper functionality from iov for all to use. Useful for
creating verbose debug printfery that dumps packet data.
Signed-off-by: Peter Crosthwaite <peter.crosthwaite@xilinx.com>
Message-id: faaac219c55ea586d3f748befaf5a2788fd271b8.1361853677.git.peter.crosthwaite@xilinx.com
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
This adds a function that adds all entries of a QDict to a QemuOpts if
the keys are known, and leaves only the rest in the QDict.
This way a single QDict of -drive options can be processed in multiple
places (generic block layer, block driver, backing file block driver,
etc.), where each part picks the options it knows. If at the end of the
process the QDict isn't empty, the user specified an invalid option.
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
* bonzini/hw-dirs:
sh: move files referencing CPU to hw/sh4/
ppc: move more files to hw/ppc
ppc: move files referencing CPU to hw/ppc/
m68k: move files referencing CPU to hw/m68k/
i386: move files referencing CPU to hw/i386/
arm: move files referencing CPU to hw/arm/
hw: move boards and other isolated files to hw/ARCH
ppc: express FDT dependency of pSeries and e500 boards via default-configs/
build: always link device_tree.o into emulators if libfdt available
hw: include hw header files with full paths
ppc: do not use ../ in include files
vt82c686: vt82c686 is not a PCI host bridge
virtio-9p: remove PCI dependencies from hw/9pfs/
virtio-9p: use CONFIG_VIRTFS, not CONFIG_LINUX
hw: move device-hotplug.o to toplevel, compile it once
hw: move qdev-monitor.o to toplevel directory
hw: move fifo.[ch] to libqemuutil
hw: move char backends to backends/
Conflicts:
backends/baum.c
backends/msmouse.c
hw/a15mpcore.c
hw/arm/Makefile.objs
hw/arm/pic_cpu.c
hw/dataplane/event-poll.c
hw/dataplane/virtio-blk.c
include/char/baum.h
include/char/msmouse.h
qemu-char.c
vl.c
Resolve conflicts caused by header movements.
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
# By Lei Li (2) and others
# Via Stefan Hajnoczi
* stefanha/trivial-patches:
Fix the wrong description in qemu manual
pci_host: Drop write-only address_space field
rng-random: Use qemu_open / qemu_close
configure: Require at least spice-protocol-0.12.3
osdep: replace setsockopt by qemu_setsockopt
lm32: remove unused function
rtc-test: Fix test failures with recent glib
configure: Create link to icon bitmap for out-of-tree builds
Right now the inet connect code tries all available addresses but until one
doesn't fail. It passes local_err each time without clearing it from the
previous failure. This can trigger an assert since the inet connect code
tries to set an error on an object != NULL.
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
Signed-off-by: Amit Shah <amit.shah@redhat.com>
Message-id: 16c806d60aa5e9660ed7751bb4e37dcd278f97f0.1362505276.git.amit.shah@redhat.com
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
Fix the compiler warning when cross build qemu-ga
for windows by using qemu_setsockopt() instead of
setsockopt().
util/osdep.c: In function 'socket_set_nodelay':
util/osdep.c:69:5: warning: passing argument 4 of 'setsockopt' from
incompatible pointer type [enabled by default]
In file included from /home/lei/qemu_b/include/sysemu/os-win32.h:30:0,
from /home/lei/qemu_b/include/qemu-common.h:46,
from util/osdep.c:48:
/usr/i686-w64-mingw32/sys-root/mingw/include/winsock2.h:990:63: note:
expected 'const char *' but argument is of type 'int *'
Signed-off-by: Lei Li <lilei@linux.vnet.ibm.com>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
ARM Linux (like x86-64 Linux) can use transparent hugepages for
KVM if memory blocks are 2MiB aligned; set QEMU_VMALLOC_ALIGN
accordingly.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Paolo Bonzini <pbonzini@redhat.com>
qdev-monitor.c is the only "core qdev" file that is not used in
user-mode emulation, and it does not define anything that is used
by hardware models. Remove it from the hw/ directory and
remove hw/qdev-monitor.h from hw/qdev.h too; this requires
some files to have some new explicitly includes.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
The new formulation makes better use of add-with-carry type insns
that the host may have. Use gcc's sign adjustment trick to avoid
having to perform a 128-bit negation.
Signed-off-by: Richard Henderson <rth@twiddle.net>
Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
Replace some x86_64 specific inline assembly with something that
all 64-bit hosts ought to optimize well. At worst this becomes
a call to the gcc __multi3 routine, which is no worse than our
implementation in util/host-utils.c.
With gcc 4.7, we get identical code generation for x86_64. We
now get native multiplication on ia64 and s390x hosts. With minor
improvements to gcc we can get it for ppc64 as well.
Signed-off-by: Richard Henderson <rth@twiddle.net>
Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
The is the only remaining user.
Signed-off-by: Richard Henderson <rth@twiddle.net>
Reviewed-by: Eric Blake <eblake@redhat.com>
Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
This is the only remaining user.
Signed-off-by: Richard Henderson <rth@twiddle.net>
Reviewed-by: Eric Blake <eblake@redhat.com>
Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
The use of ctz has already eliminated zero, and thus the difference
in edge conditions between the two routines is irrelevant.
Signed-off-by: Richard Henderson <rth@twiddle.net>
Reviewed-by: Eric Blake <eblake@redhat.com>
Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
Both uses of ctz have already eliminated zero, and thus the difference
in edge conditions between the two routines is irrelevant.
Signed-off-by: Richard Henderson <rth@twiddle.net>
Acked-by: Paolo Bonzini <pbonzini@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
commit 8be7e7e4 and commit ec7b2ccb messed up the ordering of error
message and the helpful explanation that should follow it, like this:
$ qemu-system-x86_64 --nodefaults -S --vnc :0 --chardev null,id=,
Identifiers consist of letters, digits, '-', '.', '_', starting with a letter.
qemu-system-x86_64: -chardev null,id=,: Parameter 'id' expects an identifier
$ qemu-system-x86_64 --nodefaults -S --vnc :0 --machine kvm_shadow_mem=dunno
You may use k, M, G or T suffixes for kilobytes, megabytes, gigabytes and terabytes.
qemu-system-x86_64: -machine kvm_shadow_mem=dunno: Parameter 'kvm_shadow_mem' expects a size
Pity. Disable them for now.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Message-id: 1360354939-10994-5-git-send-email-armbru@redhat.com
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>