Register the notifier using the specific API for block devices.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Instead of modifying the new BDS after it has been opened, use the newly
supported 'detect-zeroes' option in bdrv_open_common() so that all
requirements are checked (detect-zeroes=unmap requires discard=unmap).
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Max Reitz <mreitz@redhat.com>
The option whether or not to use a native AIO interface really isn't a
generic option for all drivers, but only applies to the native file
protocols. This patch moves the option in blockdev-add to the
appropriate places (raw-posix and raw-win32).
We still have to keep the flag BDRV_O_NATIVE_AIO for compatibility
because so far the AIO option was usually specified on the wrong layer
(the top-level format driver, which didn't even look at it) and then
inherited by the protocol driver (where it was actually used). We can't
forbid this use except in new interfaces.
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Max Reitz <mreitz@redhat.com>
We can teach Xen to drain and flush each device as it needs to, instead
of trying to flush ALL devices. This removes the last user of
blk_flush_all.
The function is therefore removed under the premise that any new uses
of blk_flush_all would be the wrong paradigm: either flush the single
device that requires flushing, or use an appropriate flush_all mechanism
from outside of the BlkBackend layer.
Signed-off-by: John Snow <jsnow@redhat.com>
Reviewed-by: Max Reitz <mreitz@redhat.com>
Acked-by: Fam Zheng <famz@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Commit fe1a9cbc moved the flush_all routine from the bdrv layer to the
block-backend layer. In doing so, however, the semantics of the routine
changed slightly such that flush_all now used blk_flush instead of
bdrv_flush.
blk_flush can fail if the attached device model reports that it is not
"available," (i.e. the tray is open.) This changed the semantics of
flush_all such that it can now fail for e.g. open CDROM drives.
Reintroduce bdrv_flush_all to regain the old semantics without having to
alter the behavior of blk_flush or blk_flush_all, which are already
'doing the right thing.'
Signed-off-by: John Snow <jsnow@redhat.com>
Reviewed-by: Kevin Wolf <kwolf@redhat.com>
Reviewed-by: Max Reitz <mreitz@redhat.com>
Acked-by: Fam Zheng <famz@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Commit 0ed93d84ed ("linux-aio: process
completions from ioq_submit()") added an optimization that processes
completions each time ioq_submit() returns with requests in flight.
This commit introduces a "Co-routine re-entered recursively" error which
can be triggered with -drive format=qcow2,aio=native.
Fam Zheng <famz@redhat.com>, Kevin Wolf <kwolf@redhat.com>, and I
debugged the following backtrace:
(gdb) bt
#0 0x00007ffff0a046f5 in raise () at /lib64/libc.so.6
#1 0x00007ffff0a062fa in abort () at /lib64/libc.so.6
#2 0x0000555555ac0013 in qemu_coroutine_enter (co=0x5555583464d0) at util/qemu-coroutine.c:113
#3 0x0000555555a4b663 in qemu_laio_process_completions (s=s@entry=0x555557e2f7f0) at block/linux-aio.c:218
#4 0x0000555555a4b874 in ioq_submit (s=s@entry=0x555557e2f7f0) at block/linux-aio.c:331
#5 0x0000555555a4ba12 in laio_do_submit (fd=fd@entry=13, laiocb=laiocb@entry=0x555559d38ae0, offset=offset@entry=2932727808, type=type@entry=1) at block/linux-aio.c:383
#6 0x0000555555a4bbd3 in laio_co_submit (bs=<optimized out>, s=0x555557e2f7f0, fd=13, offset=2932727808, qiov=0x555559d38e20, type=1) at block/linux-aio.c:402
#7 0x0000555555a4fd23 in bdrv_driver_preadv (bs=bs@entry=0x55555663bcb0, offset=offset@entry=2932727808, bytes=bytes@entry=8192, qiov=qiov@entry=0x555559d38e20, flags=0) at block/io.c:804
#8 0x0000555555a52b34 in bdrv_aligned_preadv (bs=bs@entry=0x55555663bcb0, req=req@entry=0x555559d38d20, offset=offset@entry=2932727808, bytes=bytes@entry=8192, align=align@entry=512, qiov=qiov@entry=0x555559d38e20, flags=0) at block/io.c:1041
#9 0x0000555555a52db8 in bdrv_co_preadv (child=<optimized out>, offset=2932727808, bytes=8192, qiov=qiov@entry=0x555559d38e20, flags=flags@entry=0) at block/io.c:1133
#10 0x0000555555a29629 in qcow2_co_preadv (bs=0x555556635890, offset=6178725888, bytes=8192, qiov=0x555557527840, flags=<optimized out>) at block/qcow2.c:1509
#11 0x0000555555a4fd23 in bdrv_driver_preadv (bs=bs@entry=0x555556635890, offset=offset@entry=6178725888, bytes=bytes@entry=8192, qiov=qiov@entry=0x555557527840, flags=0) at block/io.c:804
#12 0x0000555555a52b34 in bdrv_aligned_preadv (bs=bs@entry=0x555556635890, req=req@entry=0x555559d39000, offset=offset@entry=6178725888, bytes=bytes@entry=8192, align=align@entry=1, qiov=qiov@entry=0x555557527840, flags=0) at block/io.c:1041
#13 0x0000555555a52db8 in bdrv_co_preadv (child=<optimized out>, offset=offset@entry=6178725888, bytes=bytes@entry=8192, qiov=qiov@entry=0x555557527840, flags=flags@entry=0) at block/io.c:1133
#14 0x0000555555a4515a in blk_co_preadv (blk=0x5555566356d0, offset=6178725888, bytes=8192, qiov=0x555557527840, flags=0) at block/block-backend.c:783
#15 0x0000555555a45266 in blk_aio_read_entry (opaque=0x5555577025e0) at block/block-backend.c:991
#16 0x0000555555ac0cfa in coroutine_trampoline (i0=<optimized out>, i1=<optimized out>) at util/coroutine-ucontext.c:78
It turned out that re-entrant ioq_submit() and completion processing
between three requests caused this error. The following check is not
sufficient to prevent recursively entering coroutines:
if (laiocb->co != qemu_coroutine_self()) {
qemu_coroutine_enter(laiocb->co);
}
As the following coroutine backtrace shows, not just the current
coroutine (self) can be entered. There might also be other coroutines
that are currently entered and transferred control due to the qcow2 lock
(CoMutex):
(gdb) qemu coroutine 0x5555583464d0
#0 0x0000555555ac0c90 in qemu_coroutine_switch (from_=from_@entry=0x5555583464d0, to_=to_@entry=0x5555572f9890, action=action@entry=COROUTINE_ENTER) at util/coroutine-ucontext.c:175
#1 0x0000555555abfe54 in qemu_coroutine_enter (co=0x5555572f9890) at util/qemu-coroutine.c:117
#2 0x0000555555ac031c in qemu_co_queue_run_restart (co=co@entry=0x5555583462c0) at util/qemu-coroutine-lock.c:60
#3 0x0000555555abfe5e in qemu_coroutine_enter (co=0x5555583462c0) at util/qemu-coroutine.c:119
#4 0x0000555555a4b663 in qemu_laio_process_completions (s=s@entry=0x555557e2f7f0) at block/linux-aio.c:218
#5 0x0000555555a4b874 in ioq_submit (s=s@entry=0x555557e2f7f0) at block/linux-aio.c:331
#6 0x0000555555a4ba12 in laio_do_submit (fd=fd@entry=13, laiocb=laiocb@entry=0x55555a338b40, offset=offset@entry=2911477760, type=type@entry=1) at block/linux-aio.c:383
#7 0x0000555555a4bbd3 in laio_co_submit (bs=<optimized out>, s=0x555557e2f7f0, fd=13, offset=2911477760, qiov=0x55555a338e80, type=1) at block/linux-aio.c:402
#8 0x0000555555a4fd23 in bdrv_driver_preadv (bs=bs@entry=0x55555663bcb0, offset=offset@entry=2911477760, bytes=bytes@entry=8192, qiov=qiov@entry=0x55555a338e80, flags=0) at block/io.c:804
#9 0x0000555555a52b34 in bdrv_aligned_preadv (bs=bs@entry=0x55555663bcb0, req=req@entry=0x55555a338d80, offset=offset@entry=2911477760, bytes=bytes@entry=8192, align=align@entry=512, qiov=qiov@entry=0x55555a338e80, flags=0) at block/io.c:1041
#10 0x0000555555a52db8 in bdrv_co_preadv (child=<optimized out>, offset=2911477760, bytes=8192, qiov=qiov@entry=0x55555a338e80, flags=flags@entry=0) at block/io.c:1133
#11 0x0000555555a29629 in qcow2_co_preadv (bs=0x555556635890, offset=6157475840, bytes=8192, qiov=0x5555575df720, flags=<optimized out>) at block/qcow2.c:1509
#12 0x0000555555a4fd23 in bdrv_driver_preadv (bs=bs@entry=0x555556635890, offset=offset@entry=6157475840, bytes=bytes@entry=8192, qiov=qiov@entry=0x5555575df720, flags=0) at block/io.c:804
#13 0x0000555555a52b34 in bdrv_aligned_preadv (bs=bs@entry=0x555556635890, req=req@entry=0x55555a339060, offset=offset@entry=6157475840, bytes=bytes@entry=8192, align=align@entry=1, qiov=qiov@entry=0x5555575df720, flags=0) at block/io.c:1041
#14 0x0000555555a52db8 in bdrv_co_preadv (child=<optimized out>, offset=offset@entry=6157475840, bytes=bytes@entry=8192, qiov=qiov@entry=0x5555575df720, flags=flags@entry=0) at block/io.c:1133
#15 0x0000555555a4515a in blk_co_preadv (blk=0x5555566356d0, offset=6157475840, bytes=8192, qiov=0x5555575df720, flags=0) at block/block-backend.c:783
#16 0x0000555555a45266 in blk_aio_read_entry (opaque=0x555557231aa0) at block/block-backend.c:991
#17 0x0000555555ac0cfa in coroutine_trampoline (i0=<optimized out>, i1=<optimized out>) at util/coroutine-ucontext.c:78
Use the new qemu_coroutine_entered() function instead of comparing
against qemu_coroutine_self(). This is correct because:
1. If a coroutine is not entered then it must have yielded to wait for
I/O completion. It is therefore safe to enter.
2. If a coroutine is entered then it must be in
ioq_submit()/qemu_laio_process_completions() because otherwise it
would be yielded while waiting for I/O completion. Therefore it will
check laio->ret and return from ioq_submit() instead of yielding,
i.e. it's guaranteed not to hang.
Reported-by: Fam Zheng <famz@redhat.com>
Tested-by: Fam Zheng <famz@redhat.com>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Reviewed-by: Fam Zheng <famz@redhat.com>
Message-id: 1474989516-18255-4-git-send-email-stefanha@redhat.com
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
This patch fixes bug with stopping and restarting replay
through monitor.
Signed-off-by: Pavel Dovgalyuk <pavel.dovgaluk@ispras.ru>
Message-Id: <20160926080815.6992.71818.stgit@PASHA-ISP>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v2.0.22 (GNU/Linux)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=JG9f
-----END PGP SIGNATURE-----
Merge remote-tracking branch 'remotes/kevin/tags/for-upstream' into staging
Block layer patches
# gpg: Signature made Fri 23 Sep 2016 12:59:46 BST
# gpg: using RSA key 0x7F09B272C88F2FD6
# gpg: Good signature from "Kevin Wolf <kwolf@redhat.com>"
# Primary key fingerprint: DC3D EB15 9A9A F95D 3D74 56FE 7F09 B272 C88F 2FD6
* remotes/kevin/tags/for-upstream: (33 commits)
block: Remove BB interface from blockdev-add/del
qemu-iotests/141: Avoid blockdev-add with id
block: Avoid printing NULL string in error messages
qemu-iotests/139: Avoid blockdev-add with id
qemu-iotests/124: Avoid blockdev-add with id
qemu-iotests/118: Avoid blockdev-add with id
qemu-iotests/117: Avoid blockdev-add with id
qemu-iotests/087: Avoid blockdev-add with id
qemu-iotests/081: Avoid blockdev-add with id
qemu-iotests/071: Avoid blockdev-add with id
qemu-iotests/067: Avoid blockdev-add with id
qemu-iotests/041: Avoid blockdev-add with id
qemu-iotests/118: Test media change with qdev name
block: Accept device model name for block_set_io_throttle
block: Accept device model name for blockdev-change-medium
block: Accept device model name for eject
block: Accept device model name for x-blockdev-remove-medium
block: Accept device model name for x-blockdev-insert-medium
block: Accept device model name for blockdev-open/close-tray
qdev-monitor: Add blk_by_qdev_id()
...
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Version: GnuPG v2
iQEcBAABCAAGBQJX5LZ0AAoJEMo1YkxqkXHGmgAIAKeDTKx0sA76ewIvH9fKdmUu
NNatJw59XnVX8lpfOU5yISkJ4BD6oBdN7tbWaOW8yzcAeYu1Ff5iUu4LBEUFb7eW
g6zqUCV58XjaCTLmTiAfa19Exfnh6pXZlZMRP4Hr3vUVSCHFmC0EyTEllfHxU/jW
aPHtAEge/p6EDAHygHJBTSQzsaXRdyJNyt/AKPreDtblNRT8VgapCDzZQPcCVGH1
F9grWVu0B/VVDS0mfgSRhT0UeF/vtiikuRW92sC4woVVB+brJyG4VwGT8oeUN8RU
30/tGo5p9fpqef3iP669uUrloLfmWcKcIJuPfQ4ZUlZh8kIV+lWK9kZuTVgocGw=
=xLJw
-----END PGP SIGNATURE-----
Merge remote-tracking branch 'remotes/famz/tags/various-pull-request' into staging
# gpg: Signature made Fri 23 Sep 2016 05:58:28 BST
# gpg: using RSA key 0xCA35624C6A9171C6
# gpg: Good signature from "Fam Zheng <famz@redhat.com>"
# gpg: WARNING: This key is not certified with a trusted signature!
# gpg: There is no indication that the signature belongs to the owner.
# Primary key fingerprint: 5003 7CB7 9706 0F76 F021 AD56 CA35 624C 6A91 71C6
* remotes/famz/tags/various-pull-request: (23 commits)
docker: exec $CMD
docker: Terminate instances at SIGTERM and SIGHUP
docker: Support showing environment information
docker: Print used options before doing configure
docker: Flatten default target list in test-quick
docker: Update fedora image to latest
docker: Generate /packages.txt in ubuntu image
docker: Generate /packages.txt in fedora image
docker: Generate /packages.txt in centos6 image
tests: Ignore test-uuid
Add UUID files to MAINTAINERS
tests: Add uuid tests
uuid: Tighten uuid parse
vl: Switch qemu_uuid to QemuUUID
configure: Remove detection code for UUID
tests: No longer dependent on CONFIG_UUID
crypto: Switch to QEMU UUID API
vpc: Use QEMU UUID API
vdi: Use QEMU UUID API
vhdx: Use QEMU UUID API
...
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
# Conflicts:
# tests/Makefile.include
This finds a BlockBackend given the device model that is attached to it.
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Now that we're checking for duplicates in the reopen queue, there's no
need to force a specific order in which the queue is constructed so we
can revert 3db2bd5508.
Since both ways of constructing the queue are now valid, this patch
doesn't have any effect on the behavior of QEMU and is not strictly
necessary. However it can help us check that the fix for the reopen
queue is robust: if it stops working properly at some point, iotest
040 will break.
Signed-off-by: Alberto Garcia <berto@igalia.com>
Reviewed-by: Kevin Wolf <kwolf@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
This adds the "read-only" option to the QDict. One important effect of
this change is that when a child inherits options from its parent, the
existing "read-only" mode can be preserved if it was explicitly set
previously.
This addresses scenarios like this:
[E] <- [D] <- [C] <- [B] <- [A]
In this case, if we reopen [D] with read-only=off, and later reopen
[B], then [D] will not inherit read-only=on from its parent during the
bdrv_reopen_queue_child() stage.
The BDRV_O_RDWR flag is not removed yet, but its keep in sync with the
value of the "read-only" option.
Signed-off-by: Alberto Garcia <berto@igalia.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Broken in previous commit:
commit aaa4d20b49
Author: Kevin Wolf <kwolf@redhat.com>
Date: Wed Jun 1 15:21:05 2016 +0200
qcow2: Make copy_sectors() byte based
The copy_sectors() code was originally using the 'sector'
parameter for encryption, which was passed in by the caller
from the QCowL2Meta.offset field (aka the guest logical
offset).
After the change, the code is using 'cluster_offset' which
was passed in from QCow2L2Meta.alloc_offset field (aka the
host physical offset).
This would cause the data to be encrypted using an incorrect
initialization vector which will in turn cause later reads
to return garbage.
Although current qcow2 built-in encryption is blocked from
usage in the emulator, one could still hit this if writing
to the file via qemu-{img,io,nbd} commands.
Cc: qemu-stable@nongnu.org
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Previously we conditionally generated footer->uuid, when libuuid was
available. Now that we have a built-in implementation, we can switch to
it.
Signed-off-by: Fam Zheng <famz@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Jeff Cody <jcody@redhat.com>
Message-Id: <1474432046-325-6-git-send-email-famz@redhat.com>
The UUID operations we need from libuuid are fully supported by QEMU UUID
implementation. Use it, and remove the unused code.
Signed-off-by: Fam Zheng <famz@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Jeff Cody <jcody@redhat.com>
Message-Id: <1474432046-325-5-git-send-email-famz@redhat.com>
This removes our dependency to libuuid, so that the driver can always be
built.
Similar to how we handled data plane configure options, --enable-vhdx
and --disable-vhdx are also changed to a nop with a message saying it's
obsolete.
Signed-off-by: Fam Zheng <famz@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Jeff Cody <jcody@redhat.com>
Message-Id: <1474432046-325-4-git-send-email-famz@redhat.com>
A number of different places across the code base use CONFIG_UUID. Some
of them are soft dependency, some are not built if libuuid is not
available, some come with dummy fallback, some throws runtime error.
It is hard to maintain, and hard to reason for users.
Since UUID is a simple standard with only a small number of operations,
it is cleaner to have a central support in libqemuutil. This patch adds
qemu_uuid_* functions that all uuid users in the code base can
rely on. Except for qemu_uuid_generate which is new code, all other
functions are just copy from existing fallbacks from other files.
Note that qemu_uuid_parse is moved without updating the function
signature to use QemuUUID, to keep this patch simple.
Signed-off-by: Fam Zheng <famz@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Jeff Cody <jcody@redhat.com>
Message-Id: <1474432046-325-2-git-send-email-famz@redhat.com>
When qemu uses iscsi devices in sg mode, iscsilun->block_size
is left at 0. Prior to commits cf081fca and similar, when
block limits were tracked in sectors, this did not matter:
various block limits were just left at 0. But when we started
scaling by block size, this caused SIGFPE.
Then, in a later patch, commit a5b8dd2c added an assertion to
bdrv_open_common() that request_alignment is always non-zero;
which was not true for SG mode. Rather than relax that assertion,
we can just provide a sane value (we don't know of any SG device
with a block size smaller than qemu's default sizing of 512 bytes).
One possible solution for SG mode is to just blindly skip ALL
of iscsi_refresh_limits(), since we already short circuit so
many other things in sg mode. But this patch takes a slightly
more conservative approach, and merely guarantees that scaling
will succeed, while still using multiples of the original size
where possible. Resulting limits may still be zero in SG mode
(that is, we mostly only fix block_size used as a denominator
or which affect assertions, not all uses).
Reported-by: Holger Schranz <holger@fam-schranz.de>
Signed-off-by: Eric Blake <eblake@redhat.com>
CC: qemu-stable@nongnu.org
Message-Id: <1473283640-15756-1-git-send-email-eblake@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
The 'block-commit' command has a 'top' parameter to specify the
topmost node from which the data is going to be copied.
[E] <- [D] <- [C] <- [B] <- [A]
In this case if [C] is the top node then this is the result:
[E] <- [B] <- [A]
[B] must be modified so its backing image string points to [E] instead
of [C]. commit_start() takes care of reopening [B] in read-write
mode, and commit_complete() puts it back in read-only mode once the
operation has finished.
In order to find [B] (the overlay node) we look for the node that has
[C] (the top node) as its backing image. However in commit_complete()
we're doing it after [C] has been removed from the chain, so [B] is
never found and remains in read-write mode.
This patch gets the overlay node before the backing chain is
manipulated.
Signed-off-by: Alberto Garcia <berto@igalia.com>
Message-id: 1471836963-28548-1-git-send-email-berto@igalia.com
Signed-off-by: Max Reitz <mreitz@redhat.com>
Modularizes the nfs block driver so that it gets dynamically loaded.
Signed-off-by: Colin Lord <clord@redhat.com>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Message-id: 1471008424-16465-5-git-send-email-clord@redhat.com
Reviewed-by: Max Reitz <mreitz@redhat.com>
Signed-off-by: Max Reitz <mreitz@redhat.com>
Extend the current module interface to allow for block drivers to be
loaded dynamically on request. The only block drivers that can be
converted into modules are the drivers that don't perform any init
operation except for registering themselves.
In addition, only the protocol drivers are being modularized, as they
are the only ones which see significant performance benefits. The format
drivers do not generally link to external libraries, so modularizing
them is of no benefit from a performance perspective.
All the necessary module information is located in a new structure found
in module_block.h
This spoils the purpose of 5505e8b76f (block/dmg: make it modular).
Before this patch, if module build is enabled, block-dmg.so is linked to
libbz2, whereas the main binary is not. In downstream, theoretically, it
means only the qemu-block-extra package depends on libbz2, while the
main QEMU package needn't to. With this patch, we (temporarily) change
the case so that the main QEMU depends on libbz2 again.
Signed-off-by: Marc Marí <markmb@redhat.com>
Signed-off-by: Colin Lord <clord@redhat.com>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Message-id: 1471008424-16465-4-git-send-email-clord@redhat.com
Reviewed-by: Max Reitz <mreitz@redhat.com>
[mreitz: Do a signed comparison against the length of
block_driver_modules[], so it will not cause a compile error when
empty]
Signed-off-by: Max Reitz <mreitz@redhat.com>
This commit moves the initialization of the QemuOptsList qemu_iscsi_opts
struct out of block/iscsi.c in order to allow the iscsi module to be
dynamically loaded.
Signed-off-by: Colin Lord <clord@redhat.com>
Reviewed-by: Fam Zheng <famz@redhat.com>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Message-id: 1471008424-16465-2-git-send-email-clord@redhat.com
Reviewed-by: Max Reitz <mreitz@redhat.com>
Signed-off-by: Max Reitz <mreitz@redhat.com>
As protection against bruteforcing passphrases, the PBKDF
algorithm is tuned by counting the number of iterations
needed to produce 1 second of running time. If the machine
that the image will be used on is much faster than the
machine where the image is created, it can be desirable
to raise the number of iterations. This change adds a new
'iter-time' property that allows the user to choose the
iteration wallclock time.
Reviewed-by: Eric Blake <eblake@redhat.com>
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
This patch is the result of coccinelle script
scripts/coccinelle/typecast.cocci
CC: Hitoshi Mitake <mitake.hitoshi@lab.ntt.co.jp>
CC: qemu-block@nongnu.org
Signed-off-by: Laurent Vivier <lvivier@redhat.com>
Reviewed-by: Hitoshi Mitake <mitake.hitoshi@lab.ntt.co.jp>
Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
Another attempt to fix the bug 1596870.
When creating new disk backed by remote file accessed via HTTPS and the
backing file has zero length, qemu-img terminates with uniformative
error message:
qemu-img: disk.qcow2: CURL: Error opening file:
While it may not make much sense to operate on empty file, other block
backends (e.g. raw backend for regular files) seem to allow it. This
patch fixes it for the curl backend and improves the reported error.
Signed-off-by: Tomáš Golembiovský <tgolembi@redhat.com>
Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
Unused function declarations were found using a simple gcc plugin and
manually verified by grepping the sources.
Signed-off-by: Ladi Prosek <lprosek@redhat.com>
Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
Auto complete mirror job in background to prevent from
blocking synchronously
Signed-off-by: Wen Congyang <wency@cn.fujitsu.com>
Signed-off-by: Changlong Xie <xiecl.fnst@cn.fujitsu.com>
Signed-off-by: Wang WeiWei <wangww.fnst@cn.fujitsu.com>
Message-id: 1469602913-20979-7-git-send-email-xiecl.fnst@cn.fujitsu.com
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Some programs that add a dependency on it will use
the block layer directly.
Signed-off-by: Wen Congyang <wency@cn.fujitsu.com>
Signed-off-by: Changlong Xie <xiecl.fnst@cn.fujitsu.com>
Signed-off-by: Wang WeiWei <wangww.fnst@cn.fujitsu.com>
Signed-off-by: zhanghailiang <zhang.zhanghailiang@huawei.com>
Signed-off-by: Gonglei <arei.gonglei@huawei.com>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Reviewed-by: Jeff Cody <jcody@redhat.com>
Message-id: 1469602913-20979-5-git-send-email-xiecl.fnst@cn.fujitsu.com
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Normal backup(sync='none') workflow:
step 1. NBD peformance I/O write from client to server
qcow2_co_writev
bdrv_co_writev
...
bdrv_aligned_pwritev
notifier_with_return_list_notify -> backup_do_cow
bdrv_driver_pwritev // write new contents
step 2. drive-backup sync=none
backup_do_cow
{
wait_for_overlapping_requests
cow_request_begin
for(; start < end; start++) {
bdrv_co_readv_no_serialising //read old contents from Secondary disk
bdrv_co_writev // write old contents to hidden-disk
}
cow_request_end
}
step 3. Then roll back to "step 1" to write new contents to Secondary disk.
And for replication, we must make sure that we only read the old contents from
Secondary disk in order to keep contents consistent.
1) Replication workflow of Secondary
virtio-blk
^
-------> 1 NBD |
|| server 3 replication
|| ^ ^
|| | backing backing |
|| Secondary disk 6<-------- hidden-disk 5 <-------- active-disk 4
|| | ^
|| '-------------------------'
|| drive-backup sync=none 2
Hence, we need these interfaces to implement coarse-grained serialization between
COW of Secondary disk and the read operation of replication.
Example codes about how to use them:
*#include "block/block_backup.h"
static coroutine_fn int xxx_co_readv()
{
CowRequest req;
BlockJob *job = secondary_disk->bs->job;
if (job) {
backup_wait_for_overlapping_requests(job, start, end);
backup_cow_request_begin(&req, job, start, end);
ret = bdrv_co_readv();
backup_cow_request_end(&req);
goto out;
}
ret = bdrv_co_readv();
out:
return ret;
}
Signed-off-by: Changlong Xie <xiecl.fnst@cn.fujitsu.com>
Signed-off-by: Wen Congyang <wency@cn.fujitsu.com>
Signed-off-by: Wang WeiWei <wangww.fnst@cn.fujitsu.com>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Message-id: 1469602913-20979-4-git-send-email-xiecl.fnst@cn.fujitsu.com
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
In order to reduce completion latency it makes sense to harvest completed
requests ASAP. Very fast backend device can complete requests just after
submission, so it is worth trying to check ring buffer in order to peek
completed requests directly after io_submit() has been called.
Indeed, this patch reduces the completions latencies and increases the
overall throughput, e.g. the following is the percentiles of number of
completed requests at once:
1th 10th 20th 30th 40th 50th 60th 70th 80th 90th 99.99th
Before 2 4 42 112 128 128 128 128 128 128 128
After 1 1 4 14 33 45 47 48 50 51 108
That means, that before the current patch is applied the ring buffer is
observed as full (128 requests were consumed at once) in 60% of calls.
After patch is applied the distribution of number of completed requests
is "smoother" and the queue (requests in-flight) is almost never full.
The fio read results are the following (write results are almost the
same and are not showed here):
Before
------
job: (groupid=0, jobs=8): err= 0: pid=2227: Tue Jul 19 11:29:50 2016
Description : [Emulation of Storage Server Access Pattern]
read : io=54681MB, bw=1822.7MB/s, iops=179779, runt= 30001msec
slat (usec): min=172, max=16883, avg=338.35, stdev=109.66
clat (usec): min=1, max=21977, avg=1051.45, stdev=299.29
lat (usec): min=317, max=22521, avg=1389.83, stdev=300.73
clat percentiles (usec):
| 1.00th=[ 346], 5.00th=[ 596], 10.00th=[ 708], 20.00th=[ 852],
| 30.00th=[ 932], 40.00th=[ 996], 50.00th=[ 1048], 60.00th=[ 1112],
| 70.00th=[ 1176], 80.00th=[ 1256], 90.00th=[ 1384], 95.00th=[ 1496],
| 99.00th=[ 1800], 99.50th=[ 1928], 99.90th=[ 2320], 99.95th=[ 2672],
| 99.99th=[ 4704]
bw (KB /s): min=205229, max=553181, per=12.50%, avg=233278.26, stdev=18383.51
After
------
job: (groupid=0, jobs=8): err= 0: pid=2220: Tue Jul 19 11:31:51 2016
Description : [Emulation of Storage Server Access Pattern]
read : io=57637MB, bw=1921.2MB/s, iops=189529, runt= 30002msec
slat (usec): min=169, max=20636, avg=329.61, stdev=124.18
clat (usec): min=2, max=19592, avg=988.78, stdev=251.04
lat (usec): min=381, max=21067, avg=1318.42, stdev=243.58
clat percentiles (usec):
| 1.00th=[ 310], 5.00th=[ 580], 10.00th=[ 748], 20.00th=[ 876],
| 30.00th=[ 908], 40.00th=[ 948], 50.00th=[ 1012], 60.00th=[ 1064],
| 70.00th=[ 1080], 80.00th=[ 1128], 90.00th=[ 1224], 95.00th=[ 1288],
| 99.00th=[ 1496], 99.50th=[ 1608], 99.90th=[ 1960], 99.95th=[ 2256],
| 99.99th=[ 5408]
bw (KB /s): min=212149, max=390160, per=12.49%, avg=245746.04, stdev=11606.75
Throughput increased from 1822MB/s to 1921MB/s, average completion latencies
decreased from 1051us to 988us.
Signed-off-by: Roman Pen <roman.penyaev@profitbricks.com>
Message-id: 1468931263-32667-4-git-send-email-roman.penyaev@profitbricks.com
Cc: Stefan Hajnoczi <stefanha@redhat.com>
Cc: Paolo Bonzini <pbonzini@redhat.com>
Cc: qemu-devel@nongnu.org
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Prepare processing events function to be called from ioq_submit(),
thus split function on two parts: the first harvests completed IO
requests, the second submits pending requests.
Signed-off-by: Roman Pen <roman.penyaev@profitbricks.com>
Message-id: 1468931263-32667-3-git-send-email-roman.penyaev@profitbricks.com
Cc: Stefan Hajnoczi <stefanha@redhat.com>
Cc: Paolo Bonzini <pbonzini@redhat.com>
Cc: qemu-devel@nongnu.org
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
AIO context in userspace is represented as a simple ring buffer, which
can be consumed directly without entering the kernel, which obviously
can bring some performance gain. QEMU does not use timeout value for
waiting for events completions, so we can consume all events from
userspace.
Signed-off-by: Roman Pen <roman.penyaev@profitbricks.com>
Message-id: 1468931263-32667-2-git-send-email-roman.penyaev@profitbricks.com
Cc: Stefan Hajnoczi <stefanha@redhat.com>
Cc: Paolo Bonzini <pbonzini@redhat.com>
Cc: qemu-devel@nongnu.org
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Section "7.1.4 Use of library functions" in the C99 standard says:
If an argument to a function has an invalid value (such as [...]
a null pointer [...]) [...] the behavior is undefined.
Additionally the "searching and sorting" functions are specified as
requiring valid pointer values as described in 7.1.4.
This patch fixes the following sanitizer errors:
block/qcow2.c:1807:41: runtime error: null pointer passed as argument 2, which is declared to never be null
block/qcow2-cluster.c:86:26: runtime error: null pointer passed as argument 2, which is declared to never be null
Reported-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Kevin Wolf <kwolf@redhat.com>
Message-id: 1473758138-19260-1-git-send-email-stefanha@redhat.com
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
currently all the libgfapi logs defaults to '/dev/stderr' as it was hardcoded
in a call to glfs logging api. When the debug level is chosen to DEBUG/TRACE,
gfapi logs will be huge and fill/overflow the console view.
This patch provides a commandline option to mention log file path which helps
in logging to the specified file and also help in persisting the gfapi logs.
Usage:
-----
*URI Style:
---------
-drive file=gluster://hostname/volname/image.qcow2,file.debug=9,\
file.logfile=/var/log/qemu/qemu-gfapi.log
*JSON Style:
----------
'json:{
"driver":"qcow2",
"file":{
"driver":"gluster",
"volume":"volname",
"path":"image.qcow2",
"debug":"9",
"logfile":"/var/log/qemu/qemu-gfapi.log",
"server":[
{
"type":"tcp",
"host":"1.2.3.4",
"port":24007
},
{
"type":"unix",
"socket":"/var/run/glusterd.socket"
}
]
}
}'
Reviewed-by: Jeff Cody <jcody@redhat.com>
Reviewed-by: Markus Armbruster <armbru@redhat.com>
Signed-off-by: Prasanna Kumar Kalever <prasanna.kalever@redhat.com>
Signed-off-by: Jeff Cody <jcody@redhat.com>
Use bytes as the size would be more exact than s->cluster_size. Although
qemu_iovec_to_buf() will not allow to go beyond the qiov.
Signed-off-by: Pavel Butsykin <pbutsykin@virtuozzo.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
The idea is simple - backup is "written-once" data. It is written block
by block and it is large enough. It would be nice to save storage
space and compress it.
The patch adds a flag to the qmp/hmp drive-backup command which enables
block compression. Compression should be implemented in the format driver
to enable this feature.
There are some limitations of the format driver to allow compressed writes.
We can write data only once. Though for backup this is perfectly fine.
These limitations are maintained by the driver and the error will be
reported if we are doing something wrong.
Signed-off-by: Pavel Butsykin <pbutsykin@virtuozzo.com>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Signed-off-by: Denis V. Lunev <den@openvz.org>
CC: Jeff Cody <jcody@redhat.com>
CC: Markus Armbruster <armbru@redhat.com>
CC: Eric Blake <eblake@redhat.com>
CC: John Snow <jsnow@redhat.com>
CC: Stefan Hajnoczi <stefanha@redhat.com>
CC: Kevin Wolf <kwolf@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Previously was added the assert:
commit 1755da16e3
Author: Paolo Bonzini <pbonzini@redhat.com>
Date: Thu Oct 18 16:49:18 2012 +0200
block: introduce new dirty bitmap functionality
Now the compressed write is always in coroutine and setting the bits is
done after the write, so that we can return the dirty_bitmaps for the
compressed writes.
Signed-off-by: Pavel Butsykin <pbutsykin@virtuozzo.com>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Signed-off-by: Denis V. Lunev <den@openvz.org>
CC: Jeff Cody <jcody@redhat.com>
CC: Markus Armbruster <armbru@redhat.com>
CC: Eric Blake <eblake@redhat.com>
CC: John Snow <jsnow@redhat.com>
CC: Stefan Hajnoczi <stefanha@redhat.com>
CC: Kevin Wolf <kwolf@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
There are no block drivers left that implement the old
.bdrv_write_compressed interface, so it can be removed. Also now we have
no need to use the bdrv_pwrite_compressed function and we can remove it
entirely.
Signed-off-by: Pavel Butsykin <pbutsykin@virtuozzo.com>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Signed-off-by: Denis V. Lunev <den@openvz.org>
CC: Jeff Cody <jcody@redhat.com>
CC: Markus Armbruster <armbru@redhat.com>
CC: Eric Blake <eblake@redhat.com>
CC: John Snow <jsnow@redhat.com>
CC: Stefan Hajnoczi <stefanha@redhat.com>
CC: Kevin Wolf <kwolf@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Now that the function uses a vector instead of a buffer, there is no
need to use recursive code.
Signed-off-by: Pavel Butsykin <pbutsykin@virtuozzo.com>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Signed-off-by: Denis V. Lunev <den@openvz.org>
CC: Jeff Cody <jcody@redhat.com>
CC: Markus Armbruster <armbru@redhat.com>
CC: Eric Blake <eblake@redhat.com>
CC: John Snow <jsnow@redhat.com>
CC: Stefan Hajnoczi <stefanha@redhat.com>
CC: Kevin Wolf <kwolf@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Added implementation of the qcow_co_pwritev_compressed function that
will allow us to safely use compressed writes for the qcow from running
VMs.
Signed-off-by: Pavel Butsykin <pbutsykin@virtuozzo.com>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Signed-off-by: Denis V. Lunev <den@openvz.org>
CC: Jeff Cody <jcody@redhat.com>
CC: Markus Armbruster <armbru@redhat.com>
CC: Eric Blake <eblake@redhat.com>
CC: John Snow <jsnow@redhat.com>
CC: Stefan Hajnoczi <stefanha@redhat.com>
CC: Kevin Wolf <kwolf@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Added implementation of the vmdk_co_pwritev_compressed function that
will allow us to safely use compressed writes for the vmdk from running
VMs.
Signed-off-by: Pavel Butsykin <pbutsykin@virtuozzo.com>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Signed-off-by: Denis V. Lunev <den@openvz.org>
CC: Jeff Cody <jcody@redhat.com>
CC: Markus Armbruster <armbru@redhat.com>
CC: Eric Blake <eblake@redhat.com>
CC: John Snow <jsnow@redhat.com>
CC: Stefan Hajnoczi <stefanha@redhat.com>
CC: Kevin Wolf <kwolf@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Now that the function uses a vector instead of a buffer, there is no
need to use recursive code.
Signed-off-by: Pavel Butsykin <pbutsykin@virtuozzo.com>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Signed-off-by: Denis V. Lunev <den@openvz.org>
CC: Jeff Cody <jcody@redhat.com>
CC: Markus Armbruster <armbru@redhat.com>
CC: Eric Blake <eblake@redhat.com>
CC: John Snow <jsnow@redhat.com>
CC: Stefan Hajnoczi <stefanha@redhat.com>
CC: Kevin Wolf <kwolf@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Added implementation of the qcow2_co_pwritev_compressed function that
will allow us to safely use compressed writes for the qcow2 from running
VMs.
Signed-off-by: Pavel Butsykin <pbutsykin@virtuozzo.com>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Signed-off-by: Denis V. Lunev <den@openvz.org>
CC: Jeff Cody <jcody@redhat.com>
CC: Markus Armbruster <armbru@redhat.com>
CC: Eric Blake <eblake@redhat.com>
CC: John Snow <jsnow@redhat.com>
CC: Stefan Hajnoczi <stefanha@redhat.com>
CC: Kevin Wolf <kwolf@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
For bdrv_pwrite_compressed() it looks like most of the code creating
coroutine is duplicated in bdrv_prwv_co(). So we can just add a flag
(BDRV_REQ_WRITE_COMPRESSED) and use bdrv_prwv_co() as a generic one.
In the end we get coroutine oriented function for write compressed by using
bdrv_co_pwritev/blk_co_pwritev with BDRV_REQ_WRITE_COMPRESSED flag.
Signed-off-by: Pavel Butsykin <pbutsykin@virtuozzo.com>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Signed-off-by: Denis V. Lunev <den@openvz.org>
CC: Jeff Cody <jcody@redhat.com>
CC: Markus Armbruster <armbru@redhat.com>
CC: Eric Blake <eblake@redhat.com>
CC: John Snow <jsnow@redhat.com>
CC: Stefan Hajnoczi <stefanha@redhat.com>
CC: Kevin Wolf <kwolf@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Signed-off-by: Pavel Butsykin <pbutsykin@virtuozzo.com>
Signed-off-by: Denis V. Lunev <den@openvz.org>
Reviewed-by: Eric Blake <eblake@redhat.com>
CC: Jeff Cody <jcody@redhat.com>
CC: Markus Armbruster <armbru@redhat.com>
CC: Eric Blake <eblake@redhat.com>
CC: John Snow <jsnow@redhat.com>
CC: Stefan Hajnoczi <stefanha@redhat.com>
CC: Kevin Wolf <kwolf@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
This is a preparatory patch, which continues the general trend of the
transition to the byte-based interfaces. bdrv_check_request() and
blk_check_request() are no longer used, thus we can remove them.
Signed-off-by: Pavel Butsykin <pbutsykin@virtuozzo.com>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Signed-off-by: Denis V. Lunev <den@openvz.org>
CC: Jeff Cody <jcody@redhat.com>
CC: Markus Armbruster <armbru@redhat.com>
CC: Eric Blake <eblake@redhat.com>
CC: John Snow <jsnow@redhat.com>
CC: Stefan Hajnoczi <stefanha@redhat.com>
CC: Kevin Wolf <kwolf@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
In order to remove the necessity to use BlockBackend names in the
external API, we want to allow node-names everywhere. This converts
block-stream to accept a node-name without lifting the restriction that
we're operating at a root node.
In case of an invalid device name, the command returns the GenericError
error class now instead of DeviceNotFound, because this is what
qmp_get_root_bs() returns.
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Reviewed-by: Max Reitz <mreitz@redhat.com>
Reviewed-by: Alberto Garcia <berto@igalia.com>
This patch reduce CPU usage of flush operations a bit. When we have one
flush completed we should kick only next operation. We should not start
all pending operations in the hope that they will go back to wait on
wait_queue.
Also there is a technical possibility that requests will get reordered
with the previous approach. After wakeup all requests are removed from
the wait queue. They become active and they are processed one-by-one
adding to the wait queue in the same order. Though new flush can arrive
while all requests are not put into the queue.
Signed-off-by: Denis V. Lunev <den@openvz.org>
Tested-by: Evgeny Yakovlev <eyakovlev@virtuozzo.com>
Signed-off-by: Evgeny Yakovlev <eyakovlev@virtuozzo.com>
Message-id: 1471457214-3994-3-git-send-email-den@openvz.org
CC: Stefan Hajnoczi <stefanha@redhat.com>
CC: Fam Zheng <famz@redhat.com>
CC: Kevin Wolf <kwolf@redhat.com>
CC: Max Reitz <mreitz@redhat.com>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
The following commit
commit 3ff2f67a7c
Author: Evgeny Yakovlev <eyakovlev@virtuozzo.com>
Date: Mon Jul 18 22:39:52 2016 +0300
block: ignore flush requests when storage is clean
has introduced a regression.
There is a problem that it is still possible for 2 requests to execute
in non sequential fashion and sometimes this results in a deadlock
when bdrv_drain_one/all are called for BDS with such stalled requests.
1. Current flushed_gen and flush_started_gen is 1.
2. Request 1 enters bdrv_co_flush to with write_gen 1 (i.e. the same
as flushed_gen). It gets past flushed_gen != flush_started_gen and
sets flush_started_gen to 1 (again, the same it was before).
3. Request 1 yields somewhere before exiting bdrv_co_flush
4. Request 2 enters bdrv_co_flush with write_gen 2. It gets past
flushed_gen != flush_started_gen and sets flush_started_gen to 2.
5. Request 2 runs to completion and sets flushed_gen to 2
6. Request 1 is resumed, runs to completion and sets flushed_gen to 1.
However flush_started_gen is now 2.
From here on out flushed_gen is always != to flush_started_gen and all
further requests will wait on flush_queue. This change replaces
flush_started_gen with an explicitly tracked active flush request.
Signed-off-by: Evgeny Yakovlev <eyakovlev@virtuozzo.com>
Signed-off-by: Denis V. Lunev <den@openvz.org>
Message-id: 1471457214-3994-2-git-send-email-den@openvz.org
CC: Stefan Hajnoczi <stefanha@redhat.com>
CC: Fam Zheng <famz@redhat.com>
CC: Kevin Wolf <kwolf@redhat.com>
CC: Max Reitz <mreitz@redhat.com>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Currently "make docker-test-mingw@fedora" has a warning like:
/tmp/qemu-test/src/block/curl.c: In function 'curl_sock_cb':
/tmp/qemu-test/src/block/curl.c:172:6: warning: format '%d' expects
argument of type 'int', but argument 4 has type 'curl_socket_t {aka long
long unsigned int}'
DPRINTF("CURL (AIO): Sock action %d on fd %d\n", action, fd);
^
cc1: all warnings being treated as errors
Cast to int to suppress it.
Signed-off-by: Fam Zheng <famz@redhat.com>
Message-Id: <1470027888-24381-1-git-send-email-famz@redhat.com>
Reviewed-by: John Snow <jsnow@redhat.com>
Store the runtime option values in the BDRVNBDState so they can later be
used in nbd_refresh_filename() without having to directly access the
options QDict which may contain values of non-string types.
Signed-off-by: Max Reitz <mreitz@redhat.com>
Reviewed-by: Kevin Wolf <kwolf@redhat.com>
Reviewed-by: Jeff Cody <jcody@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Store the configuration file's filename so it can later be used in
bdrv_refresh_filename() without having to directly access the options
QDict which may contain a value of a non-string type.
Signed-off-by: Max Reitz <mreitz@redhat.com>
Reviewed-by: Kevin Wolf <kwolf@redhat.com>
Reviewed-by: Jeff Cody <jcody@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Using QemuOpts will prevent qemu from crashing if the input options have
not been validated (which is the case when they are specified on the
command line or in a json: filename) and some have the wrong type.
Signed-off-by: Max Reitz <mreitz@redhat.com>
Reviewed-by: Jeff Cody <jcody@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Using QemuOpts will prevent qemu from crashing if the input options have
not been validated (which is the case when they are specified on the
command line or in a json: filename) and some have the wrong type.
Signed-off-by: Max Reitz <mreitz@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
It is generally not expected that io_submit() fails other than with
-EAGAIN, but corner cases like SELinux refusing I/O when permissions are
revoked are still possible. In this case, we shouldn't abort, but just
return an I/O error for the request.
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Message-id: 1470741619-23231-1-git-send-email-kwolf@redhat.com
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Stop to produce new async copy requests from mirror_iteration if
critical error (error action = BLOCK_ERROR_ACTION_REPORT) detected.
Signed-off-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Before this patch incorrect image could be created via qemu-img
(Example: qemu-img create -f parallels -o size=4096T hack.img),
incorrect images cannot be used due to overflow in main image structure.
This patch add check of size in image creation.
After reading size it compare it with UINT32_MAX * cluster_size.
Signed-off-by: Klim Kireev <proffk@virtuozzo.mipt.ru>
Signed-off-by: Denis V. Lunev <den@openvz.org>
Message-id: 1469639300-12155-1-git-send-email-den@openvz.org
CC: Stefan Hajnoczi <stefanha@redhat.com>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Dell Equallogic iSCSI SANs have a very unusual advertised geometry:
$ iscsi-inq -e 1 -c $((0xb0)) iscsi://XXX/0
wsnz:0
maximum compare and write length:1
optimal transfer length granularity:0
maximum transfer length:0
optimal transfer length:0
maximum prefetch xdread xdwrite transfer length:0
maximum unmap lba count:30720
maximum unmap block descriptor count:2
optimal unmap granularity:30720
ugavalid:1
unmap granularity alignment:0
maximum write same length:30720
which says that both the maximum and the optimal discard size
is 15M. It is not immediately apparent if the device allows
discard requests not aligned to the optimal size, nor if it
allows discards at a finer granularity than the optimal size.
I tried to find details in the SCSI Commands Reference Manual
Rev. A on what valid values of maximum and optimal sizes are
permitted, but while that document mentions a "Block Limits
VPD Page", I couldn't actually find documentation of that page
or what values it would have, or if a SCSI device has an
advertisement of its minimal unmap granularity. So it is not
obvious to me whether the Dell Equallogic device is compliance
with the SCSI specification.
Fortunately, it is easy enough to support non-power-of-2 sizing,
even if it means we are less efficient than truly possible when
targetting that device (for example, it means that we refuse to
unmap anything that is not a multiple of 15M and aligned to a
15M boundary, even if the device truly does support a smaller
granularity where unmapping actually works).
Reported-by: Peter Lieven <pl@kamp.de>
Signed-off-by: Eric Blake <eblake@redhat.com>
Message-Id: <1469129688-22848-5-git-send-email-eblake@redhat.com>
Acked-by: Stefan Hajnoczi <stefanha@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Rather than asserting that nbdflags is within range, just give
it the correct type to begin with :) nbdflags corresponds to
the per-export portion of NBD Protocol "transmission flags", which
is 16 bits in response to NBD_OPT_EXPORT_NAME and NBD_OPT_GO.
Furthermore, upstream NBD has never passed the global flags to
the kernel via ioctl(NBD_SET_FLAGS) (the ioctl was first
introduced in NBD 2.9.22; then a latent bug in NBD 3.1 actually
tried to OR the global flags with the transmission flags, with
the disaster that the addition of NBD_FLAG_NO_ZEROES in 3.9
caused all earlier NBD 3.x clients to treat every export as
read-only; NBD 3.10 and later intentionally clip things to 16
bits to pass only transmission flags). Qemu should follow suit,
since the current two global flags (NBD_FLAG_FIXED_NEWSTYLE
and NBD_FLAG_NO_ZEROES) have no impact on the kernel's behavior
during transmission.
CC: qemu-stable@nongnu.org
Signed-off-by: Eric Blake <eblake@redhat.com>
Message-Id: <1469129688-22848-3-git-send-email-eblake@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Mirror can do up to 16 in-flight requests, but actually on full copy
(the whole source disk is non-zero) in-flight is always 1. This happens
as the request is not limited in size: the data occupies maximum available
capacity of s->buf.
The patch limits the size of the request to some artificial constant
(1 Mb here), which is not that big or small. This effectively enables
back parallelism in mirror code as it was designed.
The result is important: the time to migrate 10 Gb disk is reduced from
~350 sec to 170 sec.
Signed-off-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
Signed-off-by: Denis V. Lunev <den@openvz.org>
Reviewed-by: Max Reitz <mreitz@redhat.com>
Reviewed-by: Jeff Cody <jcody@redhat.com>
Message-id: 1468516741-82174-1-git-send-email-vsementsov@virtuozzo.com
CC: Stefan Hajnoczi <stefanha@redhat.com>
CC: Fam Zheng <famz@redhat.com>
CC: Kevin Wolf <kwolf@redhat.com>
CC: Max Reitz <mreitz@redhat.com>
CC: Jeff Cody <jcody@redhat.com>
CC: Eric Blake <eblake@redhat.com>
Signed-off-by: Jeff Cody <jcody@redhat.com>
The qemu-img info command has the ability to expose format
specific metadata about volumes. Wire up this facility for
the LUKS driver to report on cipher configuration and key
slot usage.
$ qemu-img info ~/VirtualMachines/demo.luks
image: /home/berrange/VirtualMachines/demo.luks
file format: luks
virtual size: 98M (102760448 bytes)
disk size: 100M
encrypted: yes
Format specific information:
ivgen alg: plain64
hash alg: sha1
cipher alg: aes-128
uuid: 6ddee74b-3a22-408c-8909-6789d4fa2594
cipher mode: xts
slots:
[0]:
active: true
iters: 572706
key offset: 4096
stripes: 4000
[1]:
active: false
key offset: 135168
[2]:
active: false
key offset: 266240
[3]:
active: false
key offset: 397312
[4]:
active: false
key offset: 528384
[5]:
active: false
key offset: 659456
[6]:
active: false
key offset: 790528
[7]:
active: false
key offset: 921600
payload offset: 2097152
master key iters: 142375
One somewhat undesirable artifact is that the data fields are
printed out in (apparently) random order. This will be addressed
later by changing the way the block layer pretty-prints the
image specific data.
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
Message-id: 1469192015-16487-3-git-send-email-berrange@redhat.com
Reviewed-by: Eric Blake <eblake@redhat.com>
Signed-off-by: Max Reitz <mreitz@redhat.com>
There are no needs to allocate more than one cluster, as we set
avail_out for deflate to one cluster.
Zlib docs (http://www.zlib.net/manual.html) says:
"deflate compresses as much data as possible, and stops when the input
buffer becomes empty or the output buffer becomes full."
So, deflate will not write more than avail_out to output buffer. If
there is not enough space in output buffer for compressed data (it may
be larger than input data) deflate just returns Z_OK. (if all data is
compressed and written to output buffer deflate returns Z_STREAM_END).
Signed-off-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
Message-id: 1468515565-81313-1-git-send-email-vsementsov@virtuozzo.com
Reviewed-by: Eric Blake <eblake@redhat.com>
Reviewed-by: John Snow <jsnow@redhat.com>
Signed-off-by: Max Reitz <mreitz@redhat.com>
- interrupt remapping for intel iommus
- a bunch of virtio cleanups
- fixes all over the place
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1
iQEcBAABAgAGBQJXkQsqAAoJECgfDbjSjVRpanoIAJ9JVlc1aEjt9sa0cSBcs+NQ
J7JmgU9FqFsj+4FrNTouO3AxTjHurd1UAULP1WMPD+V3JpbnHct8r6SCBLQ5EBMN
VOjYo4DwWs1g+DqnQ9WZmbadu06XvYi/yiAKNUzWfZk0MR11D0D/S5hmarNKw0Kq
tGHeTWjGeY4WqFLV7m+qB4+cqkAByn6um99UtUvgLL05RgIEIP2IEMKYZ+rXvAa9
iGUvzqlO7mbq/+LbL18kaWywa4TCwbbd2eSGWaqhX4CuB62Rl33mWTXFcfaYhkyp
Z3FgwaJ09h0lAjSVEbyAuLFMfO/BnMcsoKqwl4xc4vkn/xBCqFtgH9JcEVm3O8U=
=ge2D
-----END PGP SIGNATURE-----
Merge remote-tracking branch 'remotes/mst/tags/for_upstream' into staging
pc, pci, virtio: new features, cleanups, fixes
- interrupt remapping for intel iommus
- a bunch of virtio cleanups
- fixes all over the place
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
# gpg: Signature made Thu 21 Jul 2016 18:49:30 BST
# gpg: using RSA key 0x281F0DB8D28D5469
# gpg: Good signature from "Michael S. Tsirkin <mst@kernel.org>"
# gpg: aka "Michael S. Tsirkin <mst@redhat.com>"
# Primary key fingerprint: 0270 606B 6F3C DF3D 0B17 0970 C350 3912 AFBE 8E67
# Subkey fingerprint: 5D09 FD08 71C8 F85B 94CA 8A0D 281F 0DB8 D28D 5469
* remotes/mst/tags/for_upstream: (57 commits)
intel_iommu: avoid unnamed fields
virtio: Update migration docs
virtio-gpu: Wrap in vmstate
virtio-gpu: Use migrate_add_blocker for virgl migration blocking
virtio-input: Wrap in vmstate
9pfs: Wrap in vmstate
virtio-serial: Wrap in vmstate
virtio-net: Wrap in vmstate
virtio-balloon: Wrap in vmstate
virtio-rng: Wrap in vmstate
virtio-blk: Wrap in vmstate
virtio-scsi: Wrap in vmstate
virtio: Migration helper function and macro
virtio-serial: Remove old migration version support
virtio-net: Remove old migration version support
virtio-scsi: Replace HandleOutput typedef
Revert "mirror: Workaround for unexpected iohandler events during completion"
virtio-scsi: Call virtio_add_queue_aio
virtio-blk: Call virtio_add_queue_aio
virtio: Introduce virtio_add_queue_aio
...
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
This reverts commit ab27c3b5e7.
The virtio storage device host notifiers now work with
bdrv_drained_begin/end, so we don't need this hack any more.
Signed-off-by: Fam Zheng <famz@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Reviewed-by: Cornelia Huck <cornelia.huck@de.ibm.com>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Acked-by: Paolo Bonzini <pbonzini@redhat.com>
Since the raw format driver is just passing things through, we can
do byte-based read and write if the underlying protocol does
likewise.
There's one tricky part - if we probed the image format, we document
that we restrict operations on the initial sector. It's easiest to
keep this guarantee by enforcing read-modify-write on sub-sector
operations (yes, this partially reverts commit ad82be2f).
Signed-off-by: Eric Blake <eblake@redhat.com>
Message-id: 1468624988-423-20-git-send-email-eblake@redhat.com
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
The NBD protocol doesn't have any notion of sectors, so it is
a fairly easy conversion to use byte-based read and write.
Signed-off-by: Eric Blake <eblake@redhat.com>
Acked-by: Paolo Bonzini <pbonzini@redhat.com>
Message-id: 1468624988-423-19-git-send-email-eblake@redhat.com
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Now that all drivers have a byte-based .bdrv_co_pdiscard(), we
no longer need to worry about the sector-based version. We can
also relax our minimum alignment to 1 for drivers that support it.
Signed-off-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Message-id: 1468624988-423-18-git-send-email-eblake@redhat.com
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Another step towards killing off sector-based block APIs.
Signed-off-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Message-id: 1468624988-423-17-git-send-email-eblake@redhat.com
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Another step towards killing off sector-based block APIs.
Signed-off-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Message-id: 1468624988-423-16-git-send-email-eblake@redhat.com
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Another step towards killing off sector-based block APIs.
Signed-off-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Message-id: 1468624988-423-15-git-send-email-eblake@redhat.com
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Another step towards killing off sector-based block APIs.
While at it, call directly into nbd-client.c instead of having
a pointless trivial wrapper in nbd.c.
Signed-off-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Message-id: 1468624988-423-14-git-send-email-eblake@redhat.com
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Another step towards killing off sector-based block APIs.
Unlike write_zeroes, where we can be handed unaligned requests
and must fail gracefully with -ENOTSUP for a fallback, we are
guaranteed that discard requests are always aligned because the
block layer already ignored unaligned head/tail.
Signed-off-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Message-id: 1468624988-423-13-git-send-email-eblake@redhat.com
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Another step towards killing off sector-based block APIs.
Signed-off-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Message-id: 1468624988-423-12-git-send-email-eblake@redhat.com
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Another step towards killing off sector-based block APIs.
Signed-off-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Message-id: 1468624988-423-11-git-send-email-eblake@redhat.com
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
There's enough drivers with a sector-based callback that it will
be easier to switch one at a time. This patch adds a byte-based
callback, and then after all drivers are swapped, we'll drop the
sector-based callback.
[checkpatch doesn't like the space after coroutine_fn in
block_int.h, but it's consistent with the rest of the file]
Signed-off-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Message-id: 1468624988-423-10-git-send-email-eblake@redhat.com
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Another step towards byte-based interfaces everywhere. Replace
the sector-based driver callback .bdrv_aio_discard() with a new
byte-based .bdrv_aio_pdiscard(). Only raw-posix and RBD drivers
are affected, so it was not worth splitting into multiple patches.
Signed-off-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Message-id: 1468624988-423-9-git-send-email-eblake@redhat.com
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
The internal function converts to byte-based before calling into
RBD code; hoist the conversion to the callers so that callers
can then be switched to byte-based themselves.
Signed-off-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Message-id: 1468624988-423-8-git-send-email-eblake@redhat.com
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
The only remaining uses of paio_submit() were flush (with no
offset or count) and discard (which we are switching to byte-based);
furthermore, the similarly named paio_submit_co() is already
byte-based.
Signed-off-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Message-id: 1468624988-423-7-git-send-email-eblake@redhat.com
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Change sector-based blk_discard(), blk_co_discard(), and
blk_aio_discard() to instead be byte-based blk_pdiscard(),
blk_co_pdiscard(), and blk_aio_pdiscard(). NBD gets a lot
simpler now that ignoring the unaligned portion of a
byte-based discard request is handled under the hood by
the block layer.
Signed-off-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Message-id: 1468624988-423-6-git-send-email-eblake@redhat.com
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Another step towards byte-based interfaces everywhere. Replace
the sector-based bdrv_aio_discard() with a new byte-based
bdrv_aio_pdiscard(), which silently ignores any unaligned head
or tail. Driver callbacks will be converted in followup patches.
Signed-off-by: Eric Blake <eblake@redhat.com>
Message-id: 1468624988-423-5-git-send-email-eblake@redhat.com
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
BlockRequest is the internal struct used by bdrv_aio_*. At the
moment, all such calls were sector-based, but we will eventually
convert to byte-based; start by changing the internal variables
to be byte-based. No change to behavior, although the read and
write code can now go byte-based through more of the stack.
Signed-off-by: Eric Blake <eblake@redhat.com>
Message-id: 1468624988-423-4-git-send-email-eblake@redhat.com
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Another step towards byte-based interfaces everywhere. Replace
the sector-based bdrv_discard() with a new byte-based
bdrv_pdiscard(), which silently ignores any unaligned head
or tail.
Signed-off-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Message-id: 1468624988-423-3-git-send-email-eblake@redhat.com
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Another step towards byte-based interfaces everywhere. Replace
the sector-based bdrv_co_discard() with a new byte-based
bdrv_co_pdiscard(), which silently ignores any unaligned head
or tail. Driver callbacks will be converted in followup patches.
By calculating the alignment outside of the loop, and clamping
the max discard to an aligned value, we can simplify the actions
done within the loop.
Signed-off-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Message-id: 1468624988-423-2-git-send-email-eblake@redhat.com
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Now that the block layer honors max_request, we don't need to
bother with an EINVAL on overlarge requests, but can instead
assert that requests are well-behaved.
Signed-off-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Fam Zheng <famz@redhat.com>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Acked-by: Paolo Bonzini <pbonzini@redhat.com>
Message-id: 1468607524-19021-7-git-send-email-eblake@redhat.com
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Now that NBD relies on the block layer to fragment things, we no
longer need to track an offset argument for which fragment of
a request we are actually servicing.
While at it, use true and false instead of 0 and 1 for a bool
parameter.
Signed-off-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Fam Zheng <famz@redhat.com>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Acked-by: Paolo Bonzini <pbonzini@redhat.com>
Message-id: 1468607524-19021-6-git-send-email-eblake@redhat.com
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Now that the block layer will honor max_transfer, we can simplify
our code to rely on that guarantee.
The readv code can call directly into nbd-client, just as the
writev code has done since commit 52a4650.
Interestingly enough, while qemu-io 'w 0 40m' splits into a 32M
and 8M transaction, 'w -z 0 40m' splits into two 16M and an 8M,
because the block layer caps the bounce buffer for writing zeroes
at 16M. When we later introduce support for NBD_CMD_WRITE_ZEROES,
we can get a full 32M zero write (or larger, if the client and
server negotiate that write zeroes can use a larger size than
ordinary writes).
Signed-off-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Fam Zheng <famz@redhat.com>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Acked-by: Paolo Bonzini <pbonzini@redhat.com>
Message-id: 1468607524-19021-5-git-send-email-eblake@redhat.com
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Drivers should be able to rely on the block layer honoring the
max transfer length, rather than needing to return -EINVAL
(iscsi) or manually fragment things (nbd). We already fragment
write zeroes at the block layer; this patch adds the fragmentation
for normal writes, after requests have been aligned (fragmenting
before alignment would lead to multiple unaligned requests, rather
than just the head and tail).
When fragmenting a large request where FUA was requested, but
where we know that FUA is implemented by flushing all requests
rather than the given request, then we can still get by with
only one flush. Note, however, that we need a followup patch
to the raw format driver to avoid a regression in the number of
flushes actually issued.
The return value was previously nebulous on success (sometimes
zero, sometimes the length written); since we never have a short
write, and since fragmenting may store yet another positive
value in 'ret', change the function to always return 0 on success,
matching what we do in bdrv_aligned_preadv().
Signed-off-by: Eric Blake <eblake@redhat.com>
Message-id: 1468607524-19021-4-git-send-email-eblake@redhat.com
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
The raw format layer supports all flags via passthrough - but
it only makes sense to pass through flags that the lower layer
actually supports.
The next patch gives stronger reasoning for why this is correct.
At the moment, the raw format layer ignores the max_transfer
limit of its protocol layer, and an attempt to do the qemu-io
'w -f 0 40m' to an NBD server that lacks FUA will pass the entire
40m request to the NBD driver, which then fragments the request
itself into a 32m write, 8m write, and flush. But once the block
layer starts honoring limits and fragmenting packets, the raw
driver will hand the NBD driver two separate requests; if both
requests have BDRV_REQ_FUA set, then this would result in a 32m
write, flush, 8m write, and second flush. By having the raw
layer no longer advertise FUA support when the protocol layer
lacks it, we are back to a single flush at the block layer for
the overall 40m request.
Note that 'w -f -z 0 40m' does not currently exhibit the same
problem, because there, the fragmentation does not occur until
at the NBD layer (the raw layer has .bdrv_co_pwrite_zeroes, and
the NBD layer doesn't advertise max_pwrite_zeroes to constrain
things at the raw layer) - but the problem is latent and we
would again have too many flushes without this patch once the
NBD layer implements support for the new NBD_CMD_WRITE_ZEROES
command, if it sets max_pwrite_zeroes to the same 32m limit as
recommended by the NBD protocol.
Signed-off-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Fam Zheng <famz@redhat.com>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Message-id: 1468607524-19021-3-git-send-email-eblake@redhat.com
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Drivers should be able to rely on the block layer honoring the
max transfer length, rather than needing to return -EINVAL
(iscsi) or manually fragment things (nbd). This patch adds
the fragmentation in the block layer, after requests have been
aligned (fragmenting before alignment would lead to multiple
unaligned requests, rather than just the head and tail).
The return value was previously nebulous on success on whether
it was zero or the length read; and fragmenting may introduce
yet other non-zero values if we use the last length read. But
as at least some callers are sloppy and expect only zero on
success, it is easiest to just guarantee 0.
[Fix uninitialized ret local variable in bdrv_aligned_preadv().
--Stefan]
Signed-off-by: Eric Blake <eblake@redhat.com>
Message-id: 1468607524-19021-2-git-send-email-eblake@redhat.com
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
This patch adds a way to specify multiple volfile servers to the gluster
block backend of QEMU with tcp|rdma transport types and their port numbers.
Problem:
Currently VM Image on gluster volume is specified like this:
file=gluster[+tcp]://host[:port]/testvol/a.img
Say we have three hosts in a trusted pool with replica 3 volume in action.
When the host mentioned in the command above goes down for some reason,
the other two hosts are still available. But there's currently no way
to tell QEMU about them.
Solution:
New way of specifying VM Image on gluster volume with volfile servers:
(We still support old syntax to maintain backward compatibility)
Basic command line syntax looks like:
Pattern I:
-drive driver=gluster,
volume=testvol,path=/path/a.raw,[debug=N,]
server.0.type=tcp,
server.0.host=1.2.3.4,
server.0.port=24007,
server.1.type=unix,
server.1.socket=/path/socketfile
Pattern II:
'json:{"driver":"qcow2","file":{"driver":"gluster",
"volume":"testvol","path":"/path/a.qcow2",["debug":N,]
"server":[{hostinfo_1}, ...{hostinfo_N}]}}'
driver => 'gluster' (protocol name)
volume => name of gluster volume where our VM image resides
path => absolute path of image in gluster volume
[debug] => libgfapi loglevel [(0 - 9) default 4 -> Error]
{hostinfo} => {{type:"tcp",host:"1.2.3.4"[,port=24007]},
{type:"unix",socket:"/path/sockfile"}}
type => transport type used to connect to gluster management daemon,
it can be tcp|unix
host => host address (hostname/ipv4/ipv6 addresses/socket path)
port => port number on which glusterd is listening.
socket => path to socket file
Examples:
1.
-drive driver=qcow2,file.driver=gluster,
file.volume=testvol,file.path=/path/a.qcow2,file.debug=9,
file.server.0.type=tcp,
file.server.0.host=1.2.3.4,
file.server.0.port=24007,
file.server.1.type=unix,
file.server.1.socket=/var/run/glusterd.socket
2.
'json:{"driver":"qcow2","file":{"driver":"gluster","volume":"testvol",
"path":"/path/a.qcow2","debug":9,"server":
[{"type":"tcp","host":"1.2.3.4","port":"24007"},
{"type":"unix","socket":"/var/run/glusterd.socket"}
]}}'
This patch gives a mechanism to provide all the server addresses, which are in
replica set, so in case host1 is down VM can still boot from any of the
active hosts.
This is equivalent to the backup-volfile-servers option supported by
mount.glusterfs (FUSE way of mounting gluster volume)
credits: sincere thanks to all the supporters
Signed-off-by: Prasanna Kumar Kalever <prasanna.kalever@redhat.com>
Reviewed-by: Markus Armbruster <armbru@redhat.com>
Message-id: 1468947453-5433-6-git-send-email-prasanna.kalever@redhat.com
Signed-off-by: Jeff Cody <jcody@redhat.com>
this patch adds 'GlusterServer' related schema in qapi/block-core.json
[Jeff: minor fix-ups of comments and formatting, per patch reviews]
Signed-off-by: Prasanna Kumar Kalever <prasanna.kalever@redhat.com>
Reviewed-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Message-id: 1468947453-5433-5-git-send-email-prasanna.kalever@redhat.com
Signed-off-by: Jeff Cody <jcody@redhat.com>
gluster volfile server fetch happens through unix and/or tcp, it doesn't
support volfile fetch over rdma. The rdma code may actually mislead,
so to make sure things do not break, for now we fallback to tcp when requested
for rdma, with a warning.
If you are wondering how this worked all these days, its the gluster libgfapi
code which handles anything other than unix transport as socket/tcp, sad but
true.
Also gluster doesn't support ipv6 addresses, removing the ipv6 related
comments/docs section
[Jeff: Minor grammatical fixes in comments and commit message, per
review comments]
Signed-off-by: Prasanna Kumar Kalever <prasanna.kalever@redhat.com>
Reviewed-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Jeff Cody <jcody@redhat.com>
Message-id: 1468947453-5433-4-git-send-email-prasanna.kalever@redhat.com
Signed-off-by: Jeff Cody <jcody@redhat.com>
unified coding styles of multiline function arguments and other error functions
moved random declarations of structures and other list variables
Signed-off-by: Prasanna Kumar Kalever <prasanna.kalever@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Jeff Cody <jcody@redhat.com>
Message-id: 1468947453-5433-3-git-send-email-prasanna.kalever@redhat.com
Signed-off-by: Jeff Cody <jcody@redhat.com>
A future patch will add support for multiple gluster servers. Existing
terminology is a bit unusual in relation to what names are used by
other networked devices, and doesn't map very well to the terminology
we expect to use for multiple servers. Therefore, rename the following
options:
'server' -> 'host'
'image' -> 'path'
'volname' -> 'volume'
Signed-off-by: Prasanna Kumar Kalever <prasanna.kalever@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Jeff Cody <jcody@redhat.com>
Message-id: 1468947453-5433-2-git-send-email-prasanna.kalever@redhat.com
Signed-off-by: Jeff Cody <jcody@redhat.com>
There are 2 deficiencies here:
- mirror_iteration could start several requests inside. Thus we could
simply have more in_flight requests than MAX_IN_FLIGHT.
- keeping this in mind throttling in mirror_run which is checking
s->in_flight == MAX_IN_FLIGHT is wrong.
The patch adds the check and throttling into mirror_iteration and fixes
the check in mirror_run() to be sure.
Signed-off-by: Denis V. Lunev <den@openvz.org>
Reviewed-by: Max Reitz <mreitz@redhat.com>
Message-id: 1466598927-5990-1-git-send-email-den@openvz.org
CC: Jeff Cody <jcody@redhat.com>
CC: Kevin Wolf <kwolf@redhat.com>
CC: Max Reitz <mreitz@redhat.com>
Signed-off-by: Jeff Cody <jcody@redhat.com>
(cherry picked from commit e648dc95c28fbca12e67be26a1fc4b9a0676c3fe)
We should not take into account zero blocks for delay calculations.
They are not read and thus IO throttling is not required. In the
other case VM migration with 16 Tb QCOW2 disk with 4 Gb of data takes
days.
Signed-off-by: Denis V. Lunev <den@openvz.org>
Reviewed-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
Reviewed-by: Fam Zheng <famz@redhat.com>
Message-id: 1468503209-19498-9-git-send-email-den@openvz.org
CC: Stefan Hajnoczi <stefanha@redhat.com>
CC: Kevin Wolf <kwolf@redhat.com>
CC: Max Reitz <mreitz@redhat.com>
CC: Jeff Cody <jcody@redhat.com>
CC: Eric Blake <eblake@redhat.com>
Signed-off-by: Jeff Cody <jcody@redhat.com>
With a bdrv_co_write_zeroes method on a target BDS and when this method
is working as indicated by the bdrv_can_write_zeroes_with_unmap(), zeroes
will not be placed into the wire. Thus the target could be very efficiently
zeroed out. This should be done with the largest chunk possible.
Signed-off-by: Denis V. Lunev <den@openvz.org>
Reviewed-by: Vladimir Sementsov-Ogievskiy<vsementsov@virtuozzo.com>
Reviewed-by: Fam Zheng <famz@redhat.com>
Message-id: 1468503209-19498-8-git-send-email-den@openvz.org
CC: Stefan Hajnoczi <stefanha@redhat.com>
CC: Kevin Wolf <kwolf@redhat.com>
CC: Max Reitz <mreitz@redhat.com>
CC: Jeff Cody <jcody@redhat.com>
CC: Eric Blake <eblake@redhat.com>
Signed-off-by: Jeff Cody <jcody@redhat.com>
There is no need to scan allocation tables if we have mark_all_dirty flag
set. Just mark it all dirty.
Signed-off-by: Denis V. Lunev <den@openvz.org>
Reviewed-by: Vladimir Sementsov-Ogievskiy<vsementsov@virtuozzo.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Reviewed-by: John Snow <jsnow@redhat.com>
Reviewed-by: Fam Zheng <famz@redhat.com>
Message-id: 1468503209-19498-7-git-send-email-den@openvz.org
CC: Stefan Hajnoczi <stefanha@redhat.com>
CC: Kevin Wolf <kwolf@redhat.com>
CC: Max Reitz <mreitz@redhat.com>
CC: Jeff Cody <jcody@redhat.com>
Signed-off-by: Jeff Cody <jcody@redhat.com>
The code inside the helper will be extended in the next patch. mirror_run
itself is overbloated at the moment.
Signed-off-by: Denis V. Lunev <den@openvz.org>
Reviewed-by: Vladimir Sementsov-Ogievskiy<vsementsov@virtuozzo.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Fam Zheng <famz@redhat.com>
Message-id: 1468503209-19498-5-git-send-email-den@openvz.org
CC: Stefan Hajnoczi <stefanha@redhat.com>
CC: Kevin Wolf <kwolf@redhat.com>
CC: Max Reitz <mreitz@redhat.com>
CC: Jeff Cody <jcody@redhat.com>
CC: Eric Blake <eblake@redhat.com>
Signed-off-by: Jeff Cody <jcody@redhat.com>
The patch also places last_pause_ns from stack in mirror_run into
MirrorBlockJob structure. This helper will be useful in next patches.
Signed-off-by: Denis V. Lunev <den@openvz.org>
Reviewed-by: Eric Blake <eblake@redhat.com>
Message-id: 1468503209-19498-4-git-send-email-den@openvz.org
CC: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
CC: Eric Blake <eblake@redhat.com>
CC: Stefan Hajnoczi <stefanha@redhat.com>
CC: Fam Zheng <famz@redhat.com>
CC: Kevin Wolf <kwolf@redhat.com>
CC: Max Reitz <mreitz@redhat.com>
CC: Jeff Cody <jcody@redhat.com>
Signed-off-by: Jeff Cody <jcody@redhat.com>
We keep here the sum of int fields. Thus this could easily overflow,
especially when we will start sending big requests in next patches.
Signed-off-by: Denis V. Lunev <den@openvz.org>
Reviewed-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Reviewed-by: John Snow <jsnow@redhat.com>
Reviewed-by: Fam Zheng <famz@redhat.com>
Message-id: 1468503209-19498-3-git-send-email-den@openvz.org
CC: Stefan Hajnoczi <stefanha@redhat.com>
CC: Kevin Wolf <kwolf@redhat.com>
CC: Max Reitz <mreitz@redhat.com>
CC: Jeff Cody <jcody@redhat.com>
Signed-off-by: Jeff Cody <jcody@redhat.com>
Underlying HBitmap operates even with uint64_t. Thus this change is safe.
This would be useful f.e. to mark entire bitmap dirty in one call.
Signed-off-by: Denis V. Lunev <den@openvz.org>
Reviewed-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Reviewed-by: John Snow <jsnow@redhat.com>
Reviewed-by: Fam Zheng <famz@redhat.com>
Message-id: 1468503209-19498-2-git-send-email-den@openvz.org
CC: Stefan Hajnoczi <stefanha@redhat.com>
CC: Kevin Wolf <kwolf@redhat.com>
CC: Max Reitz <mreitz@redhat.com>
CC: Jeff Cody <jcody@redhat.com>
Signed-off-by: Jeff Cody <jcody@redhat.com>
until now the allocation map was used only as a hint if a cluster
is allocated or not. If a block was not allocated (or Qemu had
no info about the allocation status) a get_block_status call was
issued to check the allocation status and possibly avoid
a subsequent read of unallocated sectors. If a block known to be
allocated the get_block_status call was omitted. In the other case
a get_block_status call was issued before every read to avoid
the necessity for a consistent allocation map. To avoid the
potential overhead of calling get_block_status for each and
every read request this took only place for the bigger requests.
This patch enhances this mechanism to cache the allocation
status and avoid calling get_block_status for blocks where
the allocation status has been queried before. This allows
for bypassing the read request even for smaller requests and
additionally omits calling get_block_status for known to be
unallocated blocks.
Signed-off-by: Peter Lieven <pl@kamp.de>
Message-Id: <1468831940-15556-3-git-send-email-pl@kamp.de>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
when setting clusters as alloacted the boundaries have
to be expanded. As Paolo pointed out the calculation of
the number of clusters is wrong:
Suppose cluster_sectors is 2, sector_num = 1, nb_sectors = 6:
In the "mark allocated" case, you want to set 0..8, i.e.
cluster_num=0, nb_clusters=4.
0--.--2--.--4--.--6--.--8
<--|_________________|--> (<--> = expanded)
Instead you are setting nb_clusters=3, so that 6..8 is not marked.
0--.--2--.--4--.--6--.--8
<--|______________|!!! (! = wrong)
Cc: qemu-stable@nongnu.org
Reported-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Peter Lieven <pl@kamp.de>
Message-Id: <1468831940-15556-2-git-send-email-pl@kamp.de>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Some guests (win2008 server for example) do a lot of unnecessary
flushing when underlying media has not changed. This adds additional
overhead on host when calling fsync/fdatasync.
This change introduces a write generation scheme in BlockDriverState.
Current write generation is checked against last flushed generation to
avoid unnessesary flushes.
The problem with excessive flushing was found by a performance test
which does parallel directory tree creation (from 2 processes).
Results improved from 0.424 loops/sec to 0.432 loops/sec.
Each loop creates 10^3 directories with 10 files in each.
This affected some blkdebug testcases that were expecting error logs from
failure-injected flushes which are now skipped entirely
(tests 026 071 089).
This also affects the performance of block jobs and thus BLOCK_JOB_READY
events for driver-mirror and active block-commit commands now arrives
faster, before QMP send successfully returns to caller (tests 141 144).
Signed-off-by: Evgeny Yakovlev <eyakovlev@virtuozzo.com>
Signed-off-by: Denis V. Lunev <den@openvz.org>
Reviewed-by: Paolo Bonzini <pbonzini@redhat.com>
Message-id: 1468870792-7411-5-git-send-email-den@openvz.org
CC: Kevin Wolf <kwolf@redhat.com>
CC: Max Reitz <mreitz@redhat.com>
CC: Stefan Hajnoczi <stefanha@redhat.com>
CC: Fam Zheng <famz@redhat.com>
CC: John Snow <jsnow@redhat.com>
Signed-off-by: John Snow <jsnow@redhat.com>
Invoking io_setup(MAX_EVENTS) we ask kernel to create ring buffer for us
with specified number of events. But kernel ring buffer allocation logic
is a bit tricky (ring buffer is page size aligned + some percpu allocation
are required) so eventually more than requested events number is allocated.
From a userspace side we have to follow the convention and should not try
to io_submit() more or logic, which consumes completed events, should be
changed accordingly. The pitfall is in the following sequence:
MAX_EVENTS = 128
io_setup(MAX_EVENTS)
io_submit(MAX_EVENTS)
io_submit(MAX_EVENTS)
/* now 256 events are in-flight */
io_getevents(MAX_EVENTS) = 128
/* we can handle only 128 events at once, to be sure
* that nothing is pended the io_getevents(MAX_EVENTS)
* call must be invoked once more or hang will happen. */
To prevent the hang or reiteration of io_getevents() call this patch
restricts the number of in-flights, which is now limited to MAX_EVENTS.
Signed-off-by: Roman Pen <roman.penyaev@profitbricks.com>
Reviewed-by: Fam Zheng <famz@redhat.com>
Reviewed-by: Paolo Bonzini <pbonzini@redhat.com>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Message-id: 1468415004-31755-1-git-send-email-roman.penyaev@profitbricks.com
Cc: Stefan Hajnoczi <stefanha@redhat.com>
Cc: qemu-devel@nongnu.org
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
This has better performance because it executes fewer system calls
and does not use a bottom half per disk.
Originally proposed by Ming Lei.
[Changed #include "raw-aio.h" to "block/raw-aio.h" in win32-aio.c to fix
build error as reported by Peter Maydell <peter.maydell@linaro.org>.
--Stefan]
Acked-by: Stefan Hajnoczi <stefanha@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Message-id: 1467650000-51385-1-git-send-email-pbonzini@redhat.com
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
squash! linux-aio: share one LinuxAioState within an AioContext
First, bdrv_open_child() expects all options for the child to be
prefixed by the child's name (and a separating dot). Second,
bdrv_open_child() does not take ownership of the QDict passed to it but
only extracts all options for the child, so if a QDict is created for
the sole purpose of passing it to bdrv_open_child(), it needs to be
freed afterwards.
This patch makes vvfat adhere to both of these rules.
Signed-off-by: Max Reitz <mreitz@redhat.com>
Message-id: 20160711135452.11304-1-mreitz@redhat.com
Reviewed-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Kevin Wolf <kwolf@redhat.com>
Signed-off-by: Max Reitz <mreitz@redhat.com>
Commit "cdeaf1f vmdk: add bdrv_co_write_zeroes" causes a regression on
writes. It writes metadata after every write instead of doing it only once
for each cluster.
vmdk_pwritev() writes metadata whenever m_data is set as valid so this patch
sets m_data as valid only when we have a new cluster which hasn't been
allocated before or a zero grain.
Signed-off-by: Reda Sallahi <fullmanet@gmail.com>
Message-id: 20160707084249.29084-1-fullmanet@gmail.com
Reviewed-by: Fam Zheng <famz@redhat.com>
Signed-off-by: Max Reitz <mreitz@redhat.com>
ratelimit_calculate_delay() previously reset the accounting every time
slice, no matter how much data had been processed before. This had (at
least) two consequences:
1. The minimum speed is rather large, e.g. 5 MiB/s for commit and stream.
Not sure if there are real-world use cases where this would be a
problem. Mirroring and backup over a slow link (e.g. DSL) would
come to mind, though.
2. Tests for block job operations (e.g. cancel) were rather racy
All block jobs currently use a time slice of 100ms. That's a
reasonable value to get smooth output during regular
operation. However this also meant that the state of block jobs
changed every 100ms, no matter how low the configured limit was. On
busy hosts, qemu often transferred additional chunks until the test
case had a chance to cancel the job.
Fix the block job rate limit code to delay for more than one time
slice to address the above issues. To make it easier to handle
oversized chunks we switch the semantics from returning a delay
_before_ the current request to a delay _after_ the current
request. If necessary, this delay consists of multiple time slice
units.
Since the mirror job sends multiple chunks in one go even if the rate
limit was exceeded in between, we need to keep track of the start of
the current time slice so we can correctly re-compute the delay for
the updated amount of data.
The minimum bandwidth now is 1 data unit per time slice. The block
jobs are currently passing the amount of data transferred in sectors
and using 100ms time slices, so this translates to 5120
bytes/second. With chunk sizes usually being O(512KiB), tests have
plenty of time (O(100s)) to operate on block jobs. The chance of a
race condition now is fairly remote, except possibly on insanely
loaded systems.
Signed-off-by: Sascha Silbe <silbe@linux.vnet.ibm.com>
Message-id: 1467127721-9564-2-git-send-email-silbe@linux.vnet.ibm.com
Reviewed-by: Max Reitz <mreitz@redhat.com>
Signed-off-by: Max Reitz <mreitz@redhat.com>
Recently, qcow2_get_cluster_offset() has been changed to work with bytes
instead of sectors. This invalidated some assertions and introduced a
possible integer multiplication overflow.
This could be reproduced using e.g.
$ qemu-img create -f qcow2 -o cluster_size=1M blub.qcow2 8G
Formatting 'foo.qcow2', fmt=qcow2 size=8589934592 encryption=off
cluster_size=1048576 lazy_refcounts=off refcount_bits=16
$ qemu-io -c map blub.qcow2
qemu-io: qemu/block/qcow2-cluster.c:504: qcow2_get_cluster_offset:
Assertion `bytes_needed <= INT_MAX' failed.
[1] 20775 abort (core dumped) qemu-io -c map foo.qcow2
This patch removes the now wrong assertion, adding comments and more
assertions to prove its correctness (and fixing the overflow which would
become apparent with the original assertion removed).
Signed-off-by: Max Reitz <mreitz@redhat.com>
Message-id: 20160620142623.24471-3-mreitz@redhat.com
Reviewed-by: Eric Blake <eblake@redhat.com>
Signed-off-by: Max Reitz <mreitz@redhat.com>
We refuse to open images whose L1 table we deem "too big". Consequently,
we should not produce such images ourselves.
Cc: qemu-stable@nongnu.org
Signed-off-by: Max Reitz <mreitz@redhat.com>
Message-id: 20160615153630.2116-3-mreitz@redhat.com
Reviewed-by: Eric Blake <eblake@redhat.com>
[mreitz: Added QEMU_BUILD_BUG_ON()]
Signed-off-by: Max Reitz <mreitz@redhat.com>
The rerror/werror policies are implemented in the devices, so that's
where they should be configured. In comparison to the old options in
-drive, the qdev properties are only added to those devices that
actually support them.
If the option isn't given (or "auto" is specified), the setting of the
BlockBackend is used for compatibility with the old options. For block
jobs, "auto" is the same as "enospc".
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Reviewed-by: Max Reitz <mreitz@redhat.com>
Commit implemented the 'enospc' policy as 'ignore' if the error was not
ENOSPC. The QAPI documentation promises that it's treated as 'stop'.
Using the common block job error handling function fixes this and also
adds the missing QMP event.
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Reviewed-by: Max Reitz <mreitz@redhat.com>
In practice the entry argument is always known at creation time, and
it is confusing that sometimes qemu_coroutine_enter is used with a
non-NULL argument to re-enter a coroutine (this happens in
block/sheepdog.c and tests/test-coroutine.c). So pass the opaque value
at creation time, for consistency with e.g. aio_bh_new.
Mostly done with the following semantic patch:
@ entry1 @
expression entry, arg, co;
@@
- co = qemu_coroutine_create(entry);
+ co = qemu_coroutine_create(entry, arg);
...
- qemu_coroutine_enter(co, arg);
+ qemu_coroutine_enter(co);
@ entry2 @
expression entry, arg;
identifier co;
@@
- Coroutine *co = qemu_coroutine_create(entry);
+ Coroutine *co = qemu_coroutine_create(entry, arg);
...
- qemu_coroutine_enter(co, arg);
+ qemu_coroutine_enter(co);
@ entry3 @
expression entry, arg;
@@
- qemu_coroutine_enter(qemu_coroutine_create(entry), arg);
+ qemu_coroutine_enter(qemu_coroutine_create(entry, arg));
@ reentry @
expression co;
@@
- qemu_coroutine_enter(co, NULL);
+ qemu_coroutine_enter(co);
except for the aforementioned few places where the semantic patch
stumbled (as expected) and for test_co_queue, which would otherwise
produce an uninitialized variable warning.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Reviewed-by: Fam Zheng <famz@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Signed-off-by: Fam Zheng <famz@redhat.com>
Reviewed-by: Max Reitz <mreitz@redhat.com>
Reviewed-by: Kevin Wolf <kwolf@redhat.com>
Reviewed-by: John Snow <jsnow@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
This patch adds a new optional 'job-id' parameter to 'block-commit',
allowing the user to specify the ID of the block job to be created.
Signed-off-by: Alberto Garcia <berto@igalia.com>
Reviewed-by: Kevin Wolf <kwolf@redhat.com>
Reviewed-by: Max Reitz <mreitz@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
This patch adds a new optional 'job-id' parameter to 'block-stream',
allowing the user to specify the ID of the block job to be created.
The HMP 'block_stream' command remains unchanged.
Signed-off-by: Alberto Garcia <berto@igalia.com>
Reviewed-by: Kevin Wolf <kwolf@redhat.com>
Reviewed-by: Max Reitz <mreitz@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
This patch adds a new optional 'job-id' parameter to 'blockdev-backup'
and 'drive-backup', allowing the user to specify the ID of the block
job to be created.
The HMP 'drive_backup' command remains unchanged.
Signed-off-by: Alberto Garcia <berto@igalia.com>
Reviewed-by: Kevin Wolf <kwolf@redhat.com>
Reviewed-by: Max Reitz <mreitz@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
This patch adds a new optional 'job-id' parameter to 'blockdev-mirror'
and 'drive-mirror', allowing the user to specify the ID of the block
job to be created.
The HMP 'drive_mirror' command remains unchanged.
Signed-off-by: Alberto Garcia <berto@igalia.com>
Reviewed-by: Kevin Wolf <kwolf@redhat.com>
Reviewed-by: Max Reitz <mreitz@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
When a new job is created, the job ID is taken from the device name of
the BDS. This patch adds a new 'job_id' parameter to let the caller
provide one instead.
This patch also verifies that the ID is always unique and well-formed.
This causes problems in a couple of places where no ID is being set,
because the BDS does not have a device name.
In the case of test_block_job_start() (from test-blockjob-txn.c) we
can simply use this new 'job_id' parameter to set the missing ID.
In the case of img_commit() (from qemu-img.c) we still don't have the
API to make commit_active_start() set the job ID, so we solve it by
setting a default value. We'll get rid of this as soon as we extend
the API.
Signed-off-by: Alberto Garcia <berto@igalia.com>
Reviewed-by: Max Reitz <mreitz@redhat.com>
Reviewed-by: Kevin Wolf <kwolf@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
The 'id' field of the BlockJob structure will be able to hold any ID,
not only a device name. This patch updates the description of that
field and the error messages where it is being used.
Soon we'll add the ability to set an arbitrary ID when creating a
block job.
Signed-off-by: Alberto Garcia <berto@igalia.com>
Reviewed-by: Max Reitz <mreitz@redhat.com>
Reviewed-by: Kevin Wolf <kwolf@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Tracked down with an ugly, brittle and probably buggy Perl script.
Also move includes converted to <...> up so they get included before
ours where that's obviously okay.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Tested-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Richard Henderson <rth@twiddle.net>
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1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=BgpV
-----END PGP SIGNATURE-----
Merge remote-tracking branch 'remotes/armbru/tags/pull-qapi-2016-07-06' into staging
QAPI patches for 2016-07-06
# gpg: Signature made Wed 06 Jul 2016 10:00:51 BST
# gpg: using RSA key 0x3870B400EB918653
# gpg: Good signature from "Markus Armbruster <armbru@redhat.com>"
# gpg: aka "Markus Armbruster <armbru@pond.sub.org>"
# Primary key fingerprint: 354B C8B3 D7EB 2A6B 6867 4E5F 3870 B400 EB91 8653
* remotes/armbru/tags/pull-qapi-2016-07-06:
replay: Use new QAPI cloning
sockets: Use new QAPI cloning
qapi: Add new clone visitor
qapi: Add new visit_complete() function
tests: Factor out common code in qapi output tests
tests: Clean up test-string-output-visitor
qmp-output-visitor: Favor new visit_free() function
string-output-visitor: Favor new visit_free() function
qmp-input-visitor: Favor new visit_free() function
string-input-visitor: Favor new visit_free() function
opts-visitor: Favor new visit_free() function
qapi: Add new visit_free() function
qapi: Add parameter to visit_end_*
qemu-img: Don't leak errors when outputting JSON
qapi: Improve use of qmp/types.h
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Making each output visitor provide its own output collection
function was the only remaining reason for exposing visitor
sub-types to the rest of the code base. Add a polymorphic
visit_complete() function which is a no-op for input visitors,
and which populates an opaque pointer for output visitors. For
maximum type-safety, also add a parameter to the output visitor
constructors with a type-correct version of the output pointer,
and assert that the two uses match.
This approach was considered superior to either passing the
output parameter only during construction (action at a distance
during visit_free() feels awkward) or only during visit_complete()
(defeating type safety makes it easier to use incorrectly).
Most callers were function-local, and therefore a mechanical
conversion; the testsuite was a bit trickier, but the previous
cleanup patch minimized the churn here.
The visit_complete() function may be called at most once; doing
so lets us use transfer semantics rather than duplication or
ref-count semantics to get the just-built output back to the
caller, even though it means our behavior is not idempotent.
Generated code is simplified as follows for events:
|@@ -26,7 +26,7 @@ void qapi_event_send_acpi_device_ost(ACP
| QDict *qmp;
| Error *err = NULL;
| QMPEventFuncEmit emit;
|- QmpOutputVisitor *qov;
|+ QObject *obj;
| Visitor *v;
| q_obj_ACPI_DEVICE_OST_arg param = {
| info
|@@ -39,8 +39,7 @@ void qapi_event_send_acpi_device_ost(ACP
|
| qmp = qmp_event_build_dict("ACPI_DEVICE_OST");
|
|- qov = qmp_output_visitor_new();
|- v = qmp_output_get_visitor(qov);
|+ v = qmp_output_visitor_new(&obj);
|
| visit_start_struct(v, "ACPI_DEVICE_OST", NULL, 0, &err);
| if (err) {
|@@ -55,7 +54,8 @@ void qapi_event_send_acpi_device_ost(ACP
| goto out;
| }
|
|- qdict_put_obj(qmp, "data", qmp_output_get_qobject(qov));
|+ visit_complete(v, &obj);
|+ qdict_put_obj(qmp, "data", obj);
| emit(QAPI_EVENT_ACPI_DEVICE_OST, qmp, &err);
and for commands:
| {
| Error *err = NULL;
|- QmpOutputVisitor *qov = qmp_output_visitor_new();
| Visitor *v;
|
|- v = qmp_output_get_visitor(qov);
|+ v = qmp_output_visitor_new(ret_out);
| visit_type_AddfdInfo(v, "unused", &ret_in, &err);
|- if (err) {
|- goto out;
|+ if (!err) {
|+ visit_complete(v, ret_out);
| }
|- *ret_out = qmp_output_get_qobject(qov);
|-
|-out:
| error_propagate(errp, err);
Signed-off-by: Eric Blake <eblake@redhat.com>
Message-Id: <1465490926-28625-13-git-send-email-eblake@redhat.com>
Reviewed-by: Markus Armbruster <armbru@redhat.com>
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Now that we have a polymorphic visit_free(), we no longer need
qmp_output_visitor_cleanup(); however, we still need to
expose the subtype for qmp_output_get_qobject().
Signed-off-by: Eric Blake <eblake@redhat.com>
Message-Id: <1465490926-28625-10-git-send-email-eblake@redhat.com>
Reviewed-by: Markus Armbruster <armbru@redhat.com>
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Now that we have a polymorphic visit_free(), we no longer need
opts_visitor_cleanup(); which in turn means we no longer need
to return a subtype from opts_visitor_new() nor a public upcast
function.
Signed-off-by: Eric Blake <eblake@redhat.com>
Message-Id: <1465490926-28625-6-git-send-email-eblake@redhat.com>
Reviewed-by: Markus Armbruster <armbru@redhat.com>
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Rather than making the dealloc visitor track of stack of pointers
remembered during visit_start_* in order to free them during
visit_end_*, it's a lot easier to just make all callers pass the
same pointer to visit_end_*. The generated code has access to the
same pointer, while all other users are doing virtual walks and
can pass NULL. The dealloc visitor is then greatly simplified.
All three visit_end_*() functions intentionally take a void**,
even though the visit_start_*() functions differ between void**,
GenericList**, and GenericAlternate**. This is done for several
reasons: when doing a virtual walk, passing NULL doesn't care
what the type is, but when doing a generated walk, we already
have to cast the caller's specific FOO* to call visit_start,
while using void** lets us use visit_end without a cast. Also,
an upcoming patch will add a clone visitor that wants to use
the same implementation for all three visit_end callbacks,
which is made easier if all three share the same signature.
For visitors with already track per-object state (the QMP visitors
via a stack, and the string visitors which do not allow nesting),
add an assertion that the caller is indeed passing the same
pointer to paired calls.
Signed-off-by: Eric Blake <eblake@redhat.com>
Message-Id: <1465490926-28625-4-git-send-email-eblake@redhat.com>
Reviewed-by: Markus Armbruster <armbru@redhat.com>
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Don't use the cpu_to_*w() functions, which we are trying to deprecate.
Instead either just use cpu_to_*() to do the byteswap, or use
st*_be_p() if we need to do the store somewhere other than to a
variable that's already the correct type.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Message-id: 1466093177-17890-1-git-send-email-peter.maydell@linaro.org
Reviewed-by: Eric Blake <eblake@redhat.com>
Signed-off-by: Max Reitz <mreitz@redhat.com>
This is the final patch for converting the common I/O path to take
a BdrvChild parameter instead of BlockDriverState.
The completion of this conversion means that all users that perform I/O
on an image need to actually hold a reference (in the form of BdrvChild,
possible as part of a BlockBackend) to that image. This also protects
against inconsistent use of BlockBackend vs. BlockDriverState functions
because direct use of a BlockDriverState isn't possible any more and
blk->root is private for block-backends.c.
In addition, we can now distinguish different users in the I/O path,
and the future op blockers work is going to add assertions based on
permissions stored in BdrvChild.
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Acked-by: Stefan Hajnoczi <stefanha@redhat.com>
Just like block jobs, the HMP commit command should use its own
BlockBackend for doing I/O on BlockDriverStates.
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Reviewed-by: Max Reitz <mreitz@redhat.com>
Acked-by: Stefan Hajnoczi <stefanha@redhat.com>
No code changes, just moved from one file to another.
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Acked-by: Stefan Hajnoczi <stefanha@redhat.com>