The 2.88 drive is more suitable as a default because
it can still read 1.44 images correctly, but the reverse
is not true.
Since there exist virtio-win drivers that are shipped on
2.88 floppy images, this patch will allow VMs booted without
a floppy disk inserted to later insert a 2.88MB floppy and
have that work.
This patch has been tested with msdos, freedos, fedora,
windows 8 and windows 10 without issue: if problems do
arise for certain guests being unable to cope with 2.88MB
drives as the default, they are in the minority and can use
type=144 as needed (or insert a proper boot medium and omit
type=144/288 or use type=auto) to obtain different drive types.
As icing, the default will remain auto/144 for any pre-2.6
machine types, hopefully minimizing the impact of this change
in legacy hw to basically zero.
Reviewed-by: Eric Blake <eblake@redhat.com>
Signed-off-by: John Snow <jsnow@redhat.com>
Message-id: 1453495865-9649-13-git-send-email-jsnow@redhat.com
The old test assumes a 1.44MB drive.
Assert that the QEMU default drive is now either 1.44 or 2.88.
Reviewed-by: Eric Blake <eblake@redhat.com>
Signed-off-by: John Snow <jsnow@redhat.com>
Message-id: 1453495865-9649-12-git-send-email-jsnow@redhat.com
This one is the crazy one.
fd_revalidate currently uses pick_geometry to tell if the diskette
geometry has changed upon an eject/insert event, but it won't allow us
to insert a 1.44MB diskette into a 2.88MB drive. This is inflexible.
The new algorithm applies a new heuristic to guessing disk geometries
that allows us to switch diskette types as long as the physical size
matches before falling back to the old heuristic.
The old one is roughly:
- If the size (sectors) and type matches, choose it.
- Fall back to the first geometry that matched our type.
The new one is:
- If the size (sectors) and type matches, choose it.
- If the size (sectors) and physical size match, choose it.
- Fall back to the first geometry that matched our type.
Signed-off-by: John Snow <jsnow@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Message-id: 1453495865-9649-11-git-send-email-jsnow@redhat.com
2.88MB capable drives can accept 1.44MB floppies,
for instance. To rework the pick_geometry function,
we need to know if our current drive can even accept
the type of disks we're considering.
NB: This allows us to distinguish between all of the
"total sectors" collisions between 1.20MB and 1.44MB
diskette types, by using the physical drive size as a
differentiator.
Reviewed-by: Eric Blake <eblake@redhat.com>
Signed-off-by: John Snow <jsnow@redhat.com>
Message-id: 1453495865-9649-10-git-send-email-jsnow@redhat.com
This patch adds a new explicit Floppy Drive Type option. The existing
behavior in QEMU is to automatically guess a drive type based on the
media inserted, or if a diskette is not present, arbitrarily assign one.
This behavior can be described as "auto." This patch adds the option
to pick an explicit behavior: 120, 144, 288 or none. The new "auto"
option is intended to mimic current behavior, while the other types
pick one explicitly.
Set the type given by the CLI during fd_init. If the type remains the
default (auto), we'll attempt to scan an inserted diskette if present
to determine a type. If auto is selected but no diskette is present,
we fall back to a predetermined default (currently 1.44MB to match
legacy QEMU behavior.)
Reviewed-by: Eric Blake <eblake@redhat.com>
Signed-off-by: John Snow <jsnow@redhat.com>
Message-id: 1453495865-9649-9-git-send-email-jsnow@redhat.com
Currently, QEMU chooses a drive type automatically based on the inserted
media. If there is no disk inserted, it chooses a 1.44MB drive type.
Change this behavior to be configurable, but leave it defaulted to 1.44.
This is not earnestly intended to be used by a user or a management
library, but rather exists so that pre-2.6 board types can configure it
to be a legacy value.
Reviewed-by: Eric Blake <eblake@redhat.com>
Signed-off-by: John Snow <jsnow@redhat.com>
Message-id: 1453495865-9649-8-git-send-email-jsnow@redhat.com
Split apart pick_geometry by creating a pick_drive routine that will only
ever called during device bring-up instead of relying on pick_geometry to
be used in both cases.
With this change, the drive field is changed to be 'write once'. It is
not altered after the initialization routines exit.
media_validated does not need to be migrated. The target VM
will just revalidate the media on post_load anyway.
Reviewed-by: Eric Blake <eblake@redhat.com>
Signed-off-by: John Snow <jsnow@redhat.com>
Message-id: 1453495865-9649-7-git-send-email-jsnow@redhat.com
pick_geometry is a convoluted function that makes it difficult to tell
at a glance what QEMU's current behavior for choosing a floppy drive
type is when it can't quite identify the diskette.
The code iterates over all entries in the candidate geometry table
("fd_formats") and if our specific drive type matches a row in the table,
then either "match" is set to that entry (an exact match) and the loop
exits, or "first_match" will be non-negative (the first such entry that
shares the same drive type), and the loop continues. If our specific
drive type is NONE, then all drive types in the candidate geometry table
are considered. After iteration, if "match" was not set, we fall back to
"first match".
This means that either "match" was set, or we exited the loop without an
exact match, in which case:
- If drive type is NONE, the default is truly fd_formats[0], a 1.44MB
type, because "first_match" will always get set to the first item.
- If drive type is not NONE, pick_geometry's iteration was fussier and
only looked at rows that matched our drive type. However, since all
possible drive types are represented in the table, we still know that
"first match" was set.
- If drive type is not NONE and the fd_formats table lists no options for
our drive type, we choose fd_formats[1], an incomprehensibly bizarre
choice that can never happen anyway.
Correct this: If first_match is -1, it can ONLY mean we didn't edit our
fd_formats table correctly. Throw an assertion instead.
Reviewed-by: Eric Blake <eblake@redhat.com>
Signed-off-by: John Snow <jsnow@redhat.com>
Message-id: 1453495865-9649-6-git-send-email-jsnow@redhat.com
Currently, 'drive' is used both to represent the current diskette
type as well as the current drive type.
This patch adds a 'disk' field that is updated explicitly to match
the type of the disk.
As of this patch, disk and drive are always the same, but forthcoming
patches to change the behavior of pick_geometry will invalidate this
assumption.
disk does not need to be migrated because it is not user-visible state
nor is it currently used for any calculations. It is purely informative,
and will be rebuilt automatically via fd_revalidate on the new host.
Reviewed-by: Eric Blake <eblake@redhat.com>
Signed-off-by: John Snow <jsnow@redhat.com>
Message-id: 1453495865-9649-5-git-send-email-jsnow@redhat.com
Change the floppy drive type to a QAPI enum type, to allow us to
specify the floppy drive type from the CLI in a forthcoming patch.
Reviewed-by: Eric Blake <eblake@redhat.com>
Signed-off-by: John Snow <jsnow@redhat.com>
Message-id: 1453495865-9649-4-git-send-email-jsnow@redhat.com
Modify this function to operate directly on FDrive objects instead of
unpacking and passing all of those parameters manually. Reduces the
complexity in the caller and reduces the number of args to just one.
Reviewed-by: Eric Blake <eblake@redhat.com>
Signed-off-by: John Snow <jsnow@redhat.com>
Message-id: 1453495865-9649-3-git-send-email-jsnow@redhat.com
Code motion: I want to refactor this function to work with FDrive
directly, so shuffle it below that definition.
Reviewed-by: Eric Blake <eblake@redhat.com>
Signed-off-by: John Snow <jsnow@redhat.com>
Message-id: 1453495865-9649-2-git-send-email-jsnow@redhat.com
In b7eb0c9:
hw/block-common: Factor out fall back to legacy -drive cyls=...
'blkconf_geometry()' was introduced, factoring out CHS limit validation
code that was repeated in ide, scsi, virtio-blk.
The original IDE CHS limit prior b7eb0c9 was 65535,16,255 (as per ATA
CHS addressing).
However the 'cyls_max' argument passed to 'blkconf_geometry' in the
ide_dev_initfn case was accidentally set to 65536 instead of 65535.
Fix, providing the correct 'cyls_max'.
Signed-off-by: Shmulik Ladkani <shmulik.ladkani@ravellosystems.com>
Reviewed-by: John Snow <jsnow@redhat.com>
Message-id: 1453112371-29760-1-git-send-email-shmulik.ladkani@ravellosystems.com
Signed-off-by: John Snow <jsnow@redhat.com>
Changes:
* fixes and includes clean-up
-----BEGIN PGP SIGNATURE-----
iQEcBAABAgAGBQJWpesPAAoJEFIRjjwLKdpr+NkH/if/4m1NlzH+Oa1FB5ndd8V/
0C5Mln4UykqPItXa/iBb0CLliz70OcDCzjdMiH/2sqsLdgNo3uPxm6ielGDg0sqK
m3kD0QaYjmZp1F9rxRCqXkaUkyYy3ORMFxD1nVjFisUyySghYSnxEOAmrYu6qnZQ
HsBlQp8RXSX3CodkzklG5U61GFGiuXbeQFp+C/LdpEEYk33QI5JyF4xUZXOSo7GC
vCoQOFN/xTs/QvB1pICDB9/lGIrLpYxXM+FWlzthmLS0kQUKmCvhAP+wF89cIymN
HU+sWhUjEQm1uT++5IadFqsvrog5O7Sm6lUjQoBk/ioNetPrxS8VVFMTokddEN0=
=0KqT
-----END PGP SIGNATURE-----
Merge remote-tracking branch 'remotes/lalrae/tags/mips-20160125' into staging
MIPS patches 2016-01-25
Changes:
* fixes and includes clean-up
# gpg: Signature made Mon 25 Jan 2016 09:29:51 GMT using RSA key ID 0B29DA6B
# gpg: Good signature from "Leon Alrae <leon.alrae@imgtec.com>"
* remotes/lalrae/tags/mips-20160125:
mips: Clean up includes
target-mips: Fix ALIGN instruction when bp=0
target-mips: silence NaNs for cvt.s.d and cvt.d.s
target-mips/cpu.h: Fix spell error
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Clean up includes so that osdep.h is included first and headers
which it implies are not included manually.
This commit was created with scripts/clean-includes.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Leon Alrae <leon.alrae@imgtec.com>
Signed-off-by: Leon Alrae <leon.alrae@imgtec.com>
If executing ALIGN with shift count bp=0 within mips64 emulation,
the result of the operation should be sign extended.
Taken from the official documentation (pseudo code) :
ALIGN:
tmp_rt_hi = unsigned_word(GPR[rt]) << (8*bp)
tmp_rs_lo = unsigned_word(GPR[rs]) >> (8*(4-bp))
tmp = tmp_rt_hi || tmp_rt_lo
GPR[rd] = sign_extend.32(tmp)
Signed-off-by: Miodrag Dinic <miodrag.dinic@imgtec.com>
Reviewed-by: Aurelien Jarno <aurelien@aurel32.net>
Reviewed-by: Leon Alrae <leon.alrae@imgtec.com>
Signed-off-by: Leon Alrae <leon.alrae@imgtec.com>
cvt.s.d and cvt.d.s are FP operations and thus need to convert input
sNaN into corresponding qNaN. Explicitely use the floatXX_maybe_silence_nan
functions for that as the floatXX_to_floatXX functions do not do that.
Cc: Leon Alrae <leon.alrae@imgtec.com>
Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
Reviewed-by: Leon Alrae <leon.alrae@imgtec.com>
Signed-off-by: Leon Alrae <leon.alrae@imgtec.com>
CP0IntCtl_IPPC1, the last letter should be 'i', not 'one'.
Signed-off-by: Dongxue Zhang <elta.era@gmail.com>
Reviewed-by: Leon Alrae <leon.alrae@imgtec.com>
Signed-off-by: Leon Alrae <leon.alrae@imgtec.com>
The roundAndPackFloat16 function should return a float16 value, not a
float32 one. Fix that.
Cc: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Message-id: 1452700993-6570-1-git-send-email-aurelien@aurel32.net
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Replace the uint8 softfloat-specific typedef with uint8_t.
This change was made with
find include hw fpu target-* -name '*.[ch]' | xargs sed -i -e 's/\buint8\b/uint8_t/g'
together with manual removal of the typedef definition and
manual fixing of more erroneous uses found via test compilation.
It turns out that the only code using this type is an accidental
use where uint8_t was intended anyway...
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <rth@twiddle.net>
Reviewed-by: Aurelien Jarno <aurelien@aurel32.net>
Acked-by: Leon Alrae <leon.alrae@imgtec.com>
Acked-by: James Hogan <james.hogan@imgtec.com>
Message-id: 1452603315-27030-7-git-send-email-peter.maydell@linaro.org
Replace the int8 softfloat-specific typedef with int8_t.
This change was made with
find include hw fpu target-* -name '*.[ch]' | xargs sed -i -e 's/\bint8\b/int8_t/g'
together with manual removal of the typedef definition, and
manual undoing of various mis-hits.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <rth@twiddle.net>
Reviewed-by: Aurelien Jarno <aurelien@aurel32.net>
Acked-by: Leon Alrae <leon.alrae@imgtec.com>
Acked-by: James Hogan <james.hogan@imgtec.com>
Message-id: 1452603315-27030-6-git-send-email-peter.maydell@linaro.org
Replace the uint32 softfloat-specific typedef with uint32_t.
This change was made with
find include hw fpu target-* -name '*.[ch]' | xargs sed -i -e 's/\buint32\b/uint32_t/g'
together with manual removal of the typedef definition,
manual undoing of various mis-hits, and another couple of
fixes found via test compilation.
All the uses in hw/ were using the wrong type by mistake.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <rth@twiddle.net>
Reviewed-by: Aurelien Jarno <aurelien@aurel32.net>
Acked-by: Leon Alrae <leon.alrae@imgtec.com>
Acked-by: James Hogan <james.hogan@imgtec.com>
Message-id: 1452603315-27030-5-git-send-email-peter.maydell@linaro.org
Replace the int32 softfloat-specific typedef with int32_t.
This change was made with
find hw include fpu target-* -name '*.[ch]' | xargs sed -i -e 's/\bint32\b/int32_t/g'
together with manual removal of the typedef definition, and
manual undoing of some mis-hits where macro arguments were
being used for token pasting rather than as a type.
The uses in hw/ipmi/ should not have been using this type at all.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <rth@twiddle.net>
Reviewed-by: Aurelien Jarno <aurelien@aurel32.net>
Acked-by: Leon Alrae <leon.alrae@imgtec.com>
Acked-by: James Hogan <james.hogan@imgtec.com>
Message-id: 1452603315-27030-4-git-send-email-peter.maydell@linaro.org
Replace the uint64 softfloat-specific typedef with uint64_t.
This change was made with
find include fpu target-* -name '*.[ch]' | xargs sed -i -e 's/\buint64\b/uint64_t/g'
together with manual removal of the typedef definition, and
manual undoing of some mis-hits where macro arguments were
being used for token pasting rather than as a type.
Note that the target-mips/kvm.c and target-s390x/kvm.c changes are fixing
code that should not have been using the uint64 type in the first place.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <rth@twiddle.net>
Reviewed-by: Aurelien Jarno <aurelien@aurel32.net>
Acked-by: Leon Alrae <leon.alrae@imgtec.com>
Acked-by: James Hogan <james.hogan@imgtec.com>
Message-id: 1452603315-27030-3-git-send-email-peter.maydell@linaro.org
Replace the int64 softfloat-specific typedef with int64_t.
This change was made with
find include fpu target-* -name '*.[ch]' | xargs sed -i -e 's/\bint64\b/int64_t/g'
together with manual removal of the typedef definition, and
manual undoing of some mis-hits where macro arguments were
being used for token pasting rather than as a type.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <rth@twiddle.net>
Reviewed-by: Aurelien Jarno <aurelien@aurel32.net>
Acked-by: Leon Alrae <leon.alrae@imgtec.com>
Message-id: 1452603315-27030-2-git-send-email-peter.maydell@linaro.org
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1
iEYEABECAAYFAlaiO1MACgkQAvw66wEB28IxAgCfTQuCnPaE1W1U2gPkluAaDvKo
e8sAoIdPrfSTcP3AM4wdpBphObE1ewi4
=YI2Q
-----END PGP SIGNATURE-----
Merge remote-tracking branch 'remotes/gkurz/tags/for-upstream' into staging
fprintf to error_report conversion in hw/9pfs and fsdev
# gpg: Signature made Fri 22 Jan 2016 14:23:15 GMT using DSA key ID 0101DBC2
# gpg: Good signature from "Greg Kurz <gkurz@fr.ibm.com>"
# gpg: aka "Greg Kurz <groug@free.fr>"
# gpg: aka "Greg Kurz <gkurz@linux.vnet.ibm.com>"
# gpg: aka "Gregory Kurz (Groug) <groug@free.fr>"
# gpg: aka "Gregory Kurz (Cimai Technology) <gkurz@cimai.com>"
# gpg: aka "Gregory Kurz (Meiosys Technology) <gkurz@meiosys.com>"
# gpg: WARNING: This key is not certified with a trusted signature!
# gpg: There is no indication that the signature belongs to the owner.
# Primary key fingerprint: 2BD4 3B44 535E C0A7 9894 DBA2 02FC 3AEB 0101 DBC2
* remotes/gkurz/tags/for-upstream:
fsdev: use error_report() instead of fprintf(stderr)
9pfs: use error_report() instead of fprintf(stderr)
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Cao jin <caoj.fnst@cn.fujitsu.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Stefano Stabellini <stefano.stabellini@eu.citrix.com>
To catch the error message. Also modify the caller
Signed-off-by: Cao jin <caoj.fnst@cn.fujitsu.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Stefano Stabellini <stefano.stabellini@eu.citrix.com>
To catch the error message. Also modify the caller
Signed-off-by: Cao jin <caoj.fnst@cn.fujitsu.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Stefano Stabellini <stefano.stabellini@eu.citrix.com>
To catch the error message. Also modify the caller
Signed-off-by: Cao jin <caoj.fnst@cn.fujitsu.com>
Reviewed-by: Stefano Stabellini <stefano.stabellini@eu.citrix.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
No need to roll our own (with slightly incorrect handling of errno),
when we can use the common version.
Change signed parsing to unsigned, because what it read are values in
PCI config space, which are non-negative.
Signed-off-by: Cao jin <caoj.fnst@cn.fujitsu.com>
Reviewed-by: Stefano Stabellini <stefano.stabellini@eu.citrix.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
And assert the snprintf() error, because user can do nothing in case of
snprintf() fail.
Signed-off-by: Cao jin <caoj.fnst@cn.fujitsu.com>
Reviewed-by: Stefano Stabellini <stefano.stabellini@eu.citrix.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1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=hDEn
-----END PGP SIGNATURE-----
Merge remote-tracking branch 'remotes/ehabkost/tags/x86-pull-request' into staging
X86 queue, 2016-01-21
# gpg: Signature made Thu 21 Jan 2016 15:08:40 GMT using RSA key ID 984DC5A6
# gpg: Good signature from "Eduardo Habkost <ehabkost@redhat.com>"
* remotes/ehabkost/tags/x86-pull-request:
target-i386: Add PKU and and OSPKE support
target-i386: Add support to migrate vcpu's TSC rate
target-i386: Reorganize TSC rate setting code
target-i386: Fallback vcpu's TSC rate to value returned by KVM
target-i386: Add suffixes to MMReg struct fields
target-i386: Define MMREG_UNION macro
target-i386: Define MMXReg._d field
target-i386: Rename XMM_[BWLSDQ] helpers to ZMM_*
target-i386: Rename struct XMMReg to ZMMReg
target-i386: Use a _q array on MMXReg too
target-i386/ops_sse.h: Use MMX_Q macro
target-i386: Rename optimize_flags_init()
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
* connect SPI devices in Xilinx Zynq platforms
* multiple-address-space support
* use multiple-address-space support for ARM TrustZone
* arm_gic: return correct ID registers for 11MPCore/v1/v2 GICs
* various fixes for (currently disabled) AArch64 EL2 and EL3 support
* add 'always-on' property to the virt board timer DT entry
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1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=IB51
-----END PGP SIGNATURE-----
Merge remote-tracking branch 'remotes/pmaydell/tags/pull-target-arm-20160121' into staging
target-arm queue:
* connect SPI devices in Xilinx Zynq platforms
* multiple-address-space support
* use multiple-address-space support for ARM TrustZone
* arm_gic: return correct ID registers for 11MPCore/v1/v2 GICs
* various fixes for (currently disabled) AArch64 EL2 and EL3 support
* add 'always-on' property to the virt board timer DT entry
# gpg: Signature made Thu 21 Jan 2016 14:54:56 GMT using RSA key ID 14360CDE
# gpg: Good signature from "Peter Maydell <peter.maydell@linaro.org>"
# gpg: aka "Peter Maydell <pmaydell@gmail.com>"
# gpg: aka "Peter Maydell <pmaydell@chiark.greenend.org.uk>"
* remotes/pmaydell/tags/pull-target-arm-20160121: (36 commits)
target-arm: Implement FPEXC32_EL2 system register
target-arm: ignore ELR_ELx[1] for exception return to 32-bit ARM mode
target-arm: Implement remaining illegal return event checks
target-arm: Handle exception return from AArch64 to non-EL0 AArch32
target-arm: Fix wrong AArch64 entry offset for EL2/EL3 target
target-arm: Pull semihosting handling out to arm_cpu_do_interrupt()
target-arm: Use a single entry point for AArch64 and AArch32 exceptions
target-arm: Move aarch64_cpu_do_interrupt() to helper.c
target-arm: Properly support EL2 and EL3 in arm_el_is_aa64()
arm_gic: Update ID registers based on revision
hw/arm/virt: Add always-on property to the virt board timer
hw/arm/virt: add secure memory region and UART
hw/arm/virt: Wire up memory region to CPUs explicitly
target-arm: Support multiple address spaces in page table walks
target-arm: Implement cpu_get_phys_page_attrs_debug
target-arm: Implement asidx_from_attrs
target-arm: Add QOM property for Secure memory region
qom/cpu: Add MemoryRegion property
memory: Add address_space_init_shareable()
exec.c: Use correct AddressSpace in watch_mem_read and watch_mem_write
...
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
This patch enables migrating vcpu's TSC rate. If KVM on the
destination machine supports TSC scaling, guest programs will
observe a consistent TSC rate across the migration.
If TSC scaling is not supported on the destination machine, the
migration will not be aborted and QEMU on the destination will
not set vcpu's TSC rate to the migrated value.
If vcpu's TSC rate specified by CPU option 'tsc-freq' on the
destination machine is inconsistent with the migrated TSC rate,
the migration will be aborted.
For backwards compatibility, the migration of vcpu's TSC rate is
disabled on pc-*-2.5 and older machine types.
Signed-off-by: Haozhong Zhang <haozhong.zhang@intel.com>
Reviewed-by: Eduardo Habkost <ehabkost@redhat.com>
[ehabkost: Rewrote comment at kvm_arch_put_registers()]
[ehabkost: Moved compat code to pc-2.5]
Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
Following changes are made to the TSC rate setting code in
kvm_arch_init_vcpu():
* The code is moved to a new function kvm_arch_set_tsc_khz().
* If kvm_arch_set_tsc_khz() fails, i.e. following two conditions are
both satisfied:
* KVM does not support the TSC scaling or it fails to set vcpu's
TSC rate by KVM_SET_TSC_KHZ,
* the TSC rate to be set is different than the value currently used
by KVM, then kvm_arch_init_vcpu() will fail. Prevously,
* the lack of TSC scaling never failed kvm_arch_init_vcpu(),
* the failure of KVM_SET_TSC_KHZ failed kvm_arch_init_vcpu()
unconditionally, even though the TSC rate to be set is identical
to the value currently used by KVM.
Signed-off-by: Haozhong Zhang <haozhong.zhang@intel.com>
Reviewed-by: Eduardo Habkost <ehabkost@redhat.com>
Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
If no user-specified TSC rate is present, we will try to set
env->tsc_khz to the value returned by KVM_GET_TSC_KHZ. This patch
does not change the current functionality of QEMU and just
prepares for later patches to enable migrating vcpu's TSC rate.
Signed-off-by: Haozhong Zhang <haozhong.zhang@intel.com>
Reviewed-by: Eduardo Habkost <ehabkost@redhat.com>
Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
This will ensure we never use the MMX_* and ZMM_* macros with the
wrong struct type.
Reviewed-by: Richard Henderson <rth@twiddle.net>
Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
This will simplify the definitions of ZMMReg and MMXReg.
Reviewed-by: Richard Henderson <rth@twiddle.net>
Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
Add a new field and reorder MMXReg fields, to make MMXReg and
ZMMReg field lists look the same (except for the array sizes).
Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
They are helpers for the ZMMReg fields, so name them accordingly.
This is just a global search+replace, no other changes are being
introduced.
Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
The struct represents a 512-bit register, so name it accordingly.
This is just a global search+replace, no other changes are being
introduced.
Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
Make MMXReg use the same field names used on XMMReg, so we can
try to reuse macros and other code later.
Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
