Some of an M-profile CPU's cached hflags state depends on state that's
in our NVIC object. We already do an hflags rebuild when the NVIC
registers are written, but we also need to do this on NVIC reset,
because there's no guarantee that this will happen before the
CPU reset.
This fixes an assertion due to mismatched hflags which happens if
the CPU is reset from inside a HardFault handler.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20200303174950.3298-2-peter.maydell@linaro.org
* Remove some no longer needed texinfo infrastructure
* Reorder the top level index docs to put most useful manuals first
* Split the Arm target-specific info into sub-pages
* Improve the Arm documentation a bit with info previously
only on the wiki page
-----BEGIN PGP SIGNATURE-----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=ET1a
-----END PGP SIGNATURE-----
Merge remote-tracking branch 'remotes/pmaydell/tags/pull-docs-20200312' into staging
docs queue:
* Remove some no longer needed texinfo infrastructure
* Reorder the top level index docs to put most useful manuals first
* Split the Arm target-specific info into sub-pages
* Improve the Arm documentation a bit with info previously
only on the wiki page
# gpg: Signature made Thu 12 Mar 2020 11:42:10 GMT
# gpg: using RSA key E1A5C593CD419DE28E8315CF3C2525ED14360CDE
# gpg: issuer "peter.maydell@linaro.org"
# gpg: Good signature from "Peter Maydell <peter.maydell@linaro.org>" [ultimate]
# gpg: aka "Peter Maydell <pmaydell@gmail.com>" [ultimate]
# gpg: aka "Peter Maydell <pmaydell@chiark.greenend.org.uk>" [ultimate]
# Primary key fingerprint: E1A5 C593 CD41 9DE2 8E83 15CF 3C25 25ED 1436 0CDE
* remotes/pmaydell/tags/pull-docs-20200312:
docs: Be consistent about capitalization of 'Arm'
docs: Move arm-cpu-features.rst into the system manual
docs/system/target-arm.rst: Add some introductory text
docs/system: Split target-arm.rst into sub-documents
Makefile: Allow for subdirectories in Sphinx manual dependencies
docs/qemu-option-trace.rst.inc: Remove redundant comment
docs/index.rst, docs/index.html.in: Reorder manuals
Makefile: Make all Sphinx documentation depend on the extensions
docs/sphinx/hxtool.py: Remove STEXI/ETEXI support
hxtool: Remove Texinfo generation support
Update comments in .hx files that mention Texinfo
Makefile: Remove redundant Texinfo related code
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Check the return value of blk_write() and log an error if any
Fixes: Coverity CID 1412799 (Error handling issues)
Signed-off-by: Laurent Vivier <laurent@vivier.eu>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Message-Id: <20200210132252.381343-1-laurent@vivier.eu>
The dbus-vmstate-test has been failing in some Patchew configs
since about the 6th March:
dbus-daemon[9321]: Could not get password database information for UID of current process: User "???" unknown or no memory to allocate password entry
**
ERROR:/tmp/qemu-test/src/tests/qtest/dbus-vmstate-test.c:114:get_connection: assertion failed (err == NULL): The connection is closed (g-io-error-quark, 18)
cleaning up pid 9321
ERROR - Bail out! ERROR:/tmp/qemu-test/src/tests/qtest/dbus-vmstate-test.c:114:get_connection: assertion failed (err == NULL): The connection is closed (g-io-error-quark, 18)
make: *** [/tmp/qemu-test/src/tests/Makefile.include:632: check-qtest-x86_64] Error 1
make: *** Waiting for unfinished jobs....
It's not clear why this is happening (perhaps a recently revealed
race condition or a change in the patchew build environment?).
For the moment, disable this test so that patchew test runs are
useful and don't email the list with spurious failure mails.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Message-id: 20200310152141.13959-1-peter.maydell@linaro.org
The company 'Arm' went through a rebranding some years back
involving a recapitalization from 'ARM' to 'Arm'. As a result
our documentation is a bit inconsistent between the two forms.
It's not worth trying to update everywhere in QEMU, but it's
easy enough to make docs/ consistent.
Note that "ARMv8" and similar architecture names, and
older CPU names like "ARM926" still retain all-caps.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: Niek Linnenbank <nieklinnenbank@gmail.com>
Message-id: 20200309215818.2021-6-peter.maydell@linaro.org
Now we have somewhere to put arm-specific rst documentation,
we can move arm-cpu-features.rst from the docs/ top level
directory into docs/system/arm/.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: Niek Linnenbank <nieklinnenbank@gmail.com>
Message-id: 20200309215818.2021-5-peter.maydell@linaro.org
Now we've moved the various bits of per-board documentation into
their own files, the top level document is a little bare. Add
some introductory information, including a note that many
of the board models we support are currently undocumented.
(Most sections of this new text were originally written by me
for the wiki page https://wiki.qemu.org/Documentation/Platforms/ARM)
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: Niek Linnenbank <nieklinnenbank@gmail.com>
Message-id: 20200309215818.2021-4-peter.maydell@linaro.org
Currently the documentation for Arm system emulator targets is in a
single target-arm.rst. This describes only some of the boards and
often in a fairly abbreviated fashion. Restructure it so that each
board has its own documentation file in the docs/system/arm/
subdirectory.
This will hopefully encourage us to write board documentation that
describes the board in detail, rather than a few brief paragraphs
in a single long page. The table of contents should also help users
to find the board they care about faster.
Once the structure is in place we'll be able to move microvm.rst
from the top-level docs/ directory.
All the text from the old page is retained, except for the final
paragraph ("A Linux 2.6 test image is available on the QEMU web site.
More information is available in the QEMU mailing-list archive."),
which is deleted. The git history shows this was originally added
in reference to the integratorcp board (at that time the only
Arm board that was supported), and has subsequently gradually been
further and further separated from the integratorcp documentation
by the insertion of other board documentation sections. It's
extremely out of date and no longer accurate, since AFAICT there
isn't an integratorcp kernel on the website any more; so better
deleted than retained.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: Niek Linnenbank <nieklinnenbank@gmail.com>
Message-id: 20200309215818.2021-3-peter.maydell@linaro.org
Currently we put 'docs/foo/*.rst' in the Make list of dependencies
for the Sphinx 'foo' manual, which means all the files must be
in the top level of that manual's directory. We'd like to be
able to have subdirectories inside some of the manuals, so add
'docs/foo/*/*.rst' to the dependencies too.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: Niek Linnenbank <nieklinnenbank@gmail.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20200309215818.2021-2-peter.maydell@linaro.org
The Texinfo version of the tracing options documentation has now
been deleted, so we can remove the now-redundant comment at the top
of the rST version that was reminding us that the two should be
kept in sync.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20200306171749.10756-8-peter.maydell@linaro.org
Now that qemu-doc.html is no longer present, the ordering of manuals
within the top-level index page looks a bit odd. Reshuffle so that
the manuals the user is most likely to be interested in are at the
top of the list, and the reference material is at the bottom.
Similarly, we reorder the index.rst file used as the base of
the "all manuals in one" documentation for readthedocs.
The new order is:
* system
* user
* tools
* interop
* specs
* QMP reference (if present)
* Guest agent protocol reference (if present)
* devel (if present)
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20200306171749.10756-7-peter.maydell@linaro.org
Add the Python source files of our Sphinx extensions to the
dependencies of the Sphinx manuals, so that if we edit the
extension source code the manuals get rebuilt.
Adding this dependency unconditionally means that we'll rebuild
a manual even if it happens to not use the extension whose
source file was changed, but this is simpler and less error
prone, and it's unlikely that we'll be making frequent changes
to the extensions.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20200306171749.10756-6-peter.maydell@linaro.org
Now that none of our input .hx files have STEXI/ETEXI blocks,
we can remove the code in the Sphinx hxtool extension that
supported parsing them.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20200306171749.10756-5-peter.maydell@linaro.org
All the STEXI/ETEXI blocks and the Makfile rules that use them have now
been removed from the codebase. We can remove the code from the hxtool
script which handles the STEXI/ETEXI directives and the '-t' option.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20200306171749.10756-4-peter.maydell@linaro.org
Update the header comments in .hx files that mention STEXI/ETEXI
markup; this is now SRST/ERST as all these files have been
converted to rST.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20200306171749.10756-3-peter.maydell@linaro.org
The recent conversion of qemu-doc.texi to rST forgot a few stray bits
of makefile code that are now redundant. Remove them.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20200306171749.10756-2-peter.maydell@linaro.org
This patch adds a new test file to exercise the case where
qemu-img fails to complete for the LUKS format when a non-UTF8
secret is used.
Signed-off-by: Daniel Henrique Barboza <danielhb413@gmail.com>
Message-Id: <20200130213907.2830642-5-danielhb413@gmail.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
When using a non-UTF8 secret to create a volume using qemu-img, the
following error happens:
$ qemu-img create -f luks --object secret,id=vol_1_encrypt0,file=vol_resize_pool.vol_1.secret.qzVQrI -o key-secret=vol_1_encrypt0 /var/tmp/pool_target/vol_1 10240K
Formatting '/var/tmp/pool_target/vol_1', fmt=luks size=10485760 key-secret=vol_1_encrypt0
qemu-img: /var/tmp/pool_target/vol_1: Data from secret vol_1_encrypt0 is not valid UTF-8
However, the created file '/var/tmp/pool_target/vol_1' is left behind in the
file system after the failure. This behavior can be observed when creating
the volume using Libvirt, via 'virsh vol-create', and then getting "volume
target path already exist" errors when trying to re-create the volume.
The volume file is created inside block_crypto_co_create_opts_luks(), in
block/crypto.c. If the bdrv_create_file() call is successful but any
succeeding step fails*, the existing 'fail' label does not take into
account the created file, leaving it behind.
This patch changes block_crypto_co_create_opts_luks() to delete
'filename' in case of failure. A failure in this point means that
the volume is now truncated/corrupted, so even if 'filename' was an
existing volume before calling qemu-img, it is now unusable. Deleting
the file it is not much worse than leaving it in the filesystem in
this scenario, and we don't have to deal with checking the file
pre-existence in the code.
* in our case, block_crypto_co_create_generic calls qcrypto_block_create,
which calls qcrypto_block_luks_create, and this function fails when
calling qcrypto_secret_lookup_as_utf8.
Reported-by: Srikanth Aithal <bssrikanth@in.ibm.com>
Suggested-by: Kevin Wolf <kwolf@redhat.com>
Signed-off-by: Daniel Henrique Barboza <danielhb413@gmail.com>
Message-Id: <20200130213907.2830642-4-danielhb413@gmail.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Using the new 'bdrv_co_delete_file' interface, a pure co_routine function
'bdrv_co_delete_file' inside block.c can can be used in a way similar of
the existing bdrv_create_file to to clean up a created file.
We're creating a pure co_routine because the only caller of
'bdrv_co_delete_file' will be already in co_routine context, thus there
is no need to add all the machinery to check for qemu_in_coroutine() and
create a separated co_routine to do the job.
Suggested-by: Daniel P. Berrangé <berrange@redhat.com>
Signed-off-by: Daniel Henrique Barboza <danielhb413@gmail.com>
Message-Id: <20200130213907.2830642-3-danielhb413@gmail.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Adding to Block Drivers the capability of being able to clean up
its created files can be useful in certain situations. For the
LUKS driver, for instance, a failure in one of its authentication
steps can leave files in the host that weren't there before.
This patch adds the 'bdrv_co_delete_file' interface to block
drivers and add it to the 'file' driver in file-posix.c. The
implementation is given by 'raw_co_delete_file'.
Suggested-by: Daniel P. Berrangé <berrange@redhat.com>
Signed-off-by: Daniel Henrique Barboza <danielhb413@gmail.com>
Message-Id: <20200130213907.2830642-2-danielhb413@gmail.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
The socket_scm_helper path got corrupted during the mechanical
refactor moving the qtests files into their own sub-directory.
Fixes: 1e8a1fae7 ("test: Move qtests to a separate directory")
Signed-off-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Message-Id: <20200306165751.18986-1-philmd@redhat.com>
Reviewed-by: Laurent Vivier <laurent@vivier.eu>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Anounce that 'blockdev-snapshot' command's permissions allow changing
of the backing file if the 'consistent_read' permission is not required.
This is useful for libvirt to allow late opening of the backing chain
during a blockdev-mirror.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Message-Id: <20200310113831.27293-8-kwolf@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
This patch adds test cases for attaching the backing chain to a mirror
job target right before finalising the job, where the image is in a
non-mainloop AioContext (i.e. the backing chain needs to be moved to the
AioContext of the mirror target).
This requires switching the test case from virtio-blk to virtio-scsi
because virtio-blk only actually starts using the iothreads when the
guest driver initialises the device (which never happens in a test case
without a guest OS). virtio-scsi always keeps its block nodes in the
AioContext of the the requested iothread without guest interaction.
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Message-Id: <20200310113831.27293-7-kwolf@redhat.com>
Reviewed-by: Peter Krempa <pkrempa@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
external_snapshot_prepare() tries to move the overlay to the AioContext
of the backing file (the snapshotted node). However, it's possible that
this doesn't work, but the backing file can instead be moved to the
overlay's AioContext (e.g. opening the backing chain for a mirror
target).
bdrv_append() already indirectly uses bdrv_attach_node(), which takes
care to move nodes to make sure they use the same AioContext and which
tries both directions.
So the problem has a simple fix: Just delete the unnecessary extra
bdrv_try_set_aio_context() call in external_snapshot_prepare() and
instead assert in bdrv_append() that both nodes were indeed moved to the
same AioContext.
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Message-Id: <20200310113831.27293-6-kwolf@redhat.com>
Tested-by: Peter Krempa <pkrempa@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
The newly tested scenario is a common live storage migration scenario:
The target node is opened without a backing file so that the active
layer is mirrored while its backing chain can be copied in the
background.
The backing chain should be attached to the mirror target node when
finalising the job, just before switching the users of the source node
to the new copy (at which point the mirror job still has a reference to
the node). drive-mirror did this automatically, but with blockdev-mirror
this is the job of the QMP client.
This patch adds test cases for two ways to achieve the desired result,
using either x-blockdev-reopen or blockdev-snapshot.
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Message-Id: <20200310113831.27293-5-kwolf@redhat.com>
Reviewed-by: Peter Krempa <pkrempa@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
The 'job-complete' QMP command should be run with qmp() rather than
qmp_log() if use_log=False is passed.
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Message-Id: <20200310113831.27293-4-kwolf@redhat.com>
Reviewed-by: Peter Krempa <pkrempa@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
blockdev-snapshot returned an error if the overlay was already in use,
which it defined as having any BlockBackend parent. This is in fact both
too strict (some parents can tolerate the change of visible data caused
by attaching a backing file) and too loose (some non-BlockBackend
parents may not be happy with it).
One important use case that is prevented by the too strict check is live
storage migration with blockdev-mirror. Here, the target node is
usually opened without a backing file so that the active layer is
mirrored while its backing chain can be copied in the background.
The backing chain should be attached to the mirror target node when
finalising the job, just before switching the users of the source node
to the new copy (at which point the mirror job still has a reference to
the node). drive-mirror did this automatically, but with blockdev-mirror
this is the job of the QMP client, so it needs a way to do this.
blockdev-snapshot is the obvious way, so this patch makes it work in
this scenario. The new condition is that no parent uses CONSISTENT_READ
permissions. This will ensure that the operation will still be blocked
when the node is attached to the guest device, so blockdev-snapshot
remains safe.
(For the sake of completeness, x-blockdev-reopen can be used to achieve
the same, however it is a big hammer, performs the graph change
completely unchecked and is still experimental. So even with the option
of using x-blockdev-reopen, there are reasons why blockdev-snapshot
should be able to perform this operation.)
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Message-Id: <20200310113831.27293-3-kwolf@redhat.com>
Reviewed-by: Peter Krempa <pkrempa@redhat.com>
Tested-by: Peter Krempa <pkrempa@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Message-Id: <20200310113831.27293-2-kwolf@redhat.com>
Reviewed-by: Peter Krempa <pkrempa@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
'type/id' forgot to free in qmp_object_add, this patch fix that.
The leak stack:
Direct leak of 84 byte(s) in 6 object(s) allocated from:
#0 0x7fe2a5ebf768 in __interceptor_malloc (/lib64/libasan.so.5+0xef768)
#1 0x7fe2a5044445 in g_malloc (/lib64/libglib-2.0.so.0+0x52445)
#2 0x7fe2a505dd92 in g_strdup (/lib64/libglib-2.0.so.0+0x6bd92)
#3 0x56344954e692 in qmp_object_add /mnt/sdb/qemu-new/qemu_test/qemu/qom/qom-qmp-cmds.c:258
#4 0x563449960f5a in do_qmp_dispatch /mnt/sdb/qemu-new/qemu_test/qemu/qapi/qmp-dispatch.c:132
#5 0x563449960f5a in qmp_dispatch /mnt/sdb/qemu-new/qemu_test/qemu/qapi/qmp-dispatch.c:175
#6 0x563449498a30 in monitor_qmp_dispatch /mnt/sdb/qemu-new/qemu_test/qemu/monitor/qmp.c:145
#7 0x56344949a64f in monitor_qmp_bh_dispatcher /mnt/sdb/qemu-new/qemu_test/qemu/monitor/qmp.c:234
#8 0x563449a92a3a in aio_bh_call /mnt/sdb/qemu-new/qemu_test/qemu/util/async.c:136
Direct leak of 54 byte(s) in 6 object(s) allocated from:
#0 0x7fe2a5ebf768 in __interceptor_malloc (/lib64/libasan.so.5+0xef768)
#1 0x7fe2a5044445 in g_malloc (/lib64/libglib-2.0.so.0+0x52445)
#2 0x7fe2a505dd92 in g_strdup (/lib64/libglib-2.0.so.0+0x6bd92)
#3 0x56344954e6c4 in qmp_object_add /mnt/sdb/qemu-new/qemu_test/qemu/qom/qom-qmp-cmds.c:267
#4 0x563449960f5a in do_qmp_dispatch /mnt/sdb/qemu-new/qemu_test/qemu/qapi/qmp-dispatch.c:132
#5 0x563449960f5a in qmp_dispatch /mnt/sdb/qemu-new/qemu_test/qemu/qapi/qmp-dispatch.c:175
#6 0x563449498a30 in monitor_qmp_dispatch /mnt/sdb/qemu-new/qemu_test/qemu/monitor/qmp.c:145
#7 0x56344949a64f in monitor_qmp_bh_dispatcher /mnt/sdb/qemu-new/qemu_test/qemu/monitor/qmp.c:234
#8 0x563449a92a3a in aio_bh_call /mnt/sdb/qemu-new/qemu_test/qemu/util/async.c:136
Fixes: 5f07c4d60d
Reported-by: Euler Robot <euler.robot@huawei.com>
Signed-off-by: Pan Nengyuan <pannengyuan@huawei.com>
Message-Id: <20200310064640.5059-1-pannengyuan@huawei.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Acked-by: Igor Mammedov <imammedo@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Hide structure definitions and add explicit API instead, to keep an
eye on the scope of the shared fields.
Signed-off-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
Reviewed-by: Andrey Shinkevich <andrey.shinkevich@virtuozzo.com>
Reviewed-by: Max Reitz <mreitz@redhat.com>
Message-Id: <20200311103004.7649-10-vsementsov@virtuozzo.com>
Signed-off-by: Max Reitz <mreitz@redhat.com>
Currently, block_copy operation lock the whole requested region. But
there is no reason to lock clusters, which are already copied, it will
disturb other parallel block_copy requests for no reason.
Let's instead do the following:
Lock only sub-region, which we are going to operate on. Then, after
copying all dirty sub-regions, we should wait for intersecting
requests block-copy, if they failed, we should retry these new dirty
clusters.
Signed-off-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
Reviewed-by: Andrey Shinkevich <andrey.shinkevich@virtuozzo.com>
Message-Id: <20200311103004.7649-9-vsementsov@virtuozzo.com>
Signed-off-by: Max Reitz <mreitz@redhat.com>
offset/bytes pair is more usual naming in block layer, let's use it.
Signed-off-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
Reviewed-by: Andrey Shinkevich <andrey.shinkevich@virtuozzo.com>
Reviewed-by: Max Reitz <mreitz@redhat.com>
Message-Id: <20200311103004.7649-8-vsementsov@virtuozzo.com>
Signed-off-by: Max Reitz <mreitz@redhat.com>
We have a lot of "chunk_end - start" invocations, let's switch to
bytes/cur_bytes scheme instead.
While being here, improve check on block_copy_do_copy parameters to not
overflow when calculating nbytes and use int64_t for bytes in
block_copy for consistency.
Signed-off-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
Reviewed-by: Andrey Shinkevich <andrey.shinkevich@virtuozzo.com>
Reviewed-by: Max Reitz <mreitz@redhat.com>
Message-Id: <20200311103004.7649-7-vsementsov@virtuozzo.com>
Signed-off-by: Max Reitz <mreitz@redhat.com>
Split find_conflicting_inflight_req to be used separately.
Signed-off-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
Reviewed-by: Andrey Shinkevich <andrey.shinkevich@virtuozzo.com>
Reviewed-by: Max Reitz <mreitz@redhat.com>
Message-Id: <20200311103004.7649-6-vsementsov@virtuozzo.com>
Signed-off-by: Max Reitz <mreitz@redhat.com>
Use bdrv_block_status_above to chose effective chunk size and to handle
zeroes effectively.
This substitutes checking for just being allocated or not, and drops
old code path for it. Assistance by backup job is dropped too, as
caching block-status information is more difficult than just caching
is-allocated information in our dirty bitmap, and backup job is not
good place for this caching anyway.
Signed-off-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
Reviewed-by: Andrey Shinkevich <andrey.shinkevich@virtuozzo.com>
Reviewed-by: Max Reitz <mreitz@redhat.com>
Message-Id: <20200311103004.7649-5-vsementsov@virtuozzo.com>
Signed-off-by: Max Reitz <mreitz@redhat.com>
In block_copy_do_copy we fallback to read+write if copy_range failed.
In this case copy_size is larger than defined for buffered IO, and
there is corresponding commit. Still, backup copies data cluster by
cluster, and most of requests are limited to one cluster anyway, so the
only source of this one bad-limited request is copy-before-write
operation.
Further patch will move backup to use block_copy directly, than for
cases where copy_range is not supported, first request will be
oversized in each backup. It's not good, let's change it now.
Fix is simple: just limit first copy_range request like buffer-based
request. If it succeed, set larger copy_range limit.
Signed-off-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
Reviewed-by: Andrey Shinkevich <andrey.shinkevich@virtuozzo.com>
Reviewed-by: Max Reitz <mreitz@redhat.com>
Message-Id: <20200311103004.7649-4-vsementsov@virtuozzo.com>
Signed-off-by: Max Reitz <mreitz@redhat.com>
Assume we have two regions, A and B, and region B is in-flight now,
region A is not yet touched, but it is unallocated and should be
skipped.
Correspondingly, as progress we have
total = A + B
current = 0
If we reset unallocated region A and call progress_reset_callback,
it will calculate 0 bytes dirty in the bitmap and call
job_progress_set_remaining, which will set
total = current + 0 = 0 + 0 = 0
So, B bytes are actually removed from total accounting. When job
finishes we'll have
total = 0
current = B
, which doesn't sound good.
This is because we didn't considered in-flight bytes, actually when
calculating remaining, we should have set (in_flight + dirty_bytes)
as remaining, not only dirty_bytes.
To fix it, let's refactor progress calculation, moving it to block-copy
itself instead of fixing callback. And, of course, track in_flight
bytes count.
We still have to keep one callback, to maintain backup job bytes_read
calculation, but it will go on soon, when we turn the whole backup
process into one block_copy call.
Cc: qemu-stable@nongnu.org
Signed-off-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
Reviewed-by: Andrey Shinkevich <andrey.shinkevich@virtuozzo.com>
Message-Id: <20200311103004.7649-3-vsementsov@virtuozzo.com>
Signed-off-by: Max Reitz <mreitz@redhat.com>
We need it in separate to pass to the block-copy object in the next
commit.
Cc: qemu-stable@nongnu.org
Signed-off-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
Reviewed-by: Andrey Shinkevich <andrey.shinkevich@virtuozzo.com>
Reviewed-by: Max Reitz <mreitz@redhat.com>
Message-Id: <20200311103004.7649-2-vsementsov@virtuozzo.com>
Signed-off-by: Max Reitz <mreitz@redhat.com>
On success path we return what inflate() returns instead of 0. And it
most probably works for Z_STREAM_END as it is positive, but is
definitely broken for Z_BUF_ERROR.
While being here, switch to errno return code, to be closer to
qcow2_compress API (and usual expectations).
Revert condition in if to be more positive. Drop dead initialization of
ret.
Cc: qemu-stable@nongnu.org # v4.0
Fixes: 341926ab83
Signed-off-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
Message-Id: <20200302150930.16218-1-vsementsov@virtuozzo.com>
Reviewed-by: Alberto Garcia <berto@igalia.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Signed-off-by: Max Reitz <mreitz@redhat.com>
collect_image_check() is called twice in img_check(), the filename/format will be alloced without free the original memory.
It is not a big deal since the process will exit anyway, but seems like a clean code and it will remove the warning spotted by asan.
Reported-by: Euler Robot <euler.robot@huawei.com>
Signed-off-by: Pan Nengyuan <pannengyuan@huawei.com>
Message-Id: <20200227012950.12256-3-pannengyuan@huawei.com>
Signed-off-by: Max Reitz <mreitz@redhat.com>
'crypto_opts' forgot to free in qcow2_close(), this patch fix the bellow leak stack:
Direct leak of 24 byte(s) in 1 object(s) allocated from:
#0 0x7f0edd81f970 in __interceptor_calloc (/lib64/libasan.so.5+0xef970)
#1 0x7f0edc6d149d in g_malloc0 (/lib64/libglib-2.0.so.0+0x5249d)
#2 0x55d7eaede63d in qobject_input_start_struct /mnt/sdb/qemu-new/qemu_test/qemu/qapi/qobject-input-visitor.c:295
#3 0x55d7eaed78b8 in visit_start_struct /mnt/sdb/qemu-new/qemu_test/qemu/qapi/qapi-visit-core.c:49
#4 0x55d7eaf5140b in visit_type_QCryptoBlockOpenOptions qapi/qapi-visit-crypto.c:290
#5 0x55d7eae43af3 in block_crypto_open_opts_init /mnt/sdb/qemu-new/qemu_test/qemu/block/crypto.c:163
#6 0x55d7eacd2924 in qcow2_update_options_prepare /mnt/sdb/qemu-new/qemu_test/qemu/block/qcow2.c:1148
#7 0x55d7eacd33f7 in qcow2_update_options /mnt/sdb/qemu-new/qemu_test/qemu/block/qcow2.c:1232
#8 0x55d7eacd9680 in qcow2_do_open /mnt/sdb/qemu-new/qemu_test/qemu/block/qcow2.c:1512
#9 0x55d7eacdc55e in qcow2_open_entry /mnt/sdb/qemu-new/qemu_test/qemu/block/qcow2.c:1792
#10 0x55d7eacdc8fe in qcow2_open /mnt/sdb/qemu-new/qemu_test/qemu/block/qcow2.c:1819
#11 0x55d7eac3742d in bdrv_open_driver /mnt/sdb/qemu-new/qemu_test/qemu/block.c:1317
#12 0x55d7eac3e990 in bdrv_open_common /mnt/sdb/qemu-new/qemu_test/qemu/block.c:1575
#13 0x55d7eac4442c in bdrv_open_inherit /mnt/sdb/qemu-new/qemu_test/qemu/block.c:3126
#14 0x55d7eac45c3f in bdrv_open /mnt/sdb/qemu-new/qemu_test/qemu/block.c:3219
#15 0x55d7ead8e8a4 in blk_new_open /mnt/sdb/qemu-new/qemu_test/qemu/block/block-backend.c:397
#16 0x55d7eacde74c in qcow2_co_create /mnt/sdb/qemu-new/qemu_test/qemu/block/qcow2.c:3534
#17 0x55d7eacdfa6d in qcow2_co_create_opts /mnt/sdb/qemu-new/qemu_test/qemu/block/qcow2.c:3668
#18 0x55d7eac1c678 in bdrv_create_co_entry /mnt/sdb/qemu-new/qemu_test/qemu/block.c:485
#19 0x55d7eb0024d2 in coroutine_trampoline /mnt/sdb/qemu-new/qemu_test/qemu/util/coroutine-ucontext.c:115
Reported-by: Euler Robot <euler.robot@huawei.com>
Signed-off-by: Pan Nengyuan <pannengyuan@huawei.com>
Reviewed-by: Max Reitz <mreitz@redhat.com>
Message-Id: <20200227012950.12256-2-pannengyuan@huawei.com>
Signed-off-by: Max Reitz <mreitz@redhat.com>
Tests 261 and 272 fail on RHEL 7 with coreutils 8.22, since od
--endian was not added until coreutils 8.23. Fix this by manually
constructing the final value one byte at a time.
Fixes: fc8ba423
Reported-by: Andrey Shinkevich <andrey.shinkevich@virtuozzo.com>
Signed-off-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Max Reitz <mreitz@redhat.com>
Message-Id: <20200226125424.481840-1-eblake@redhat.com>
Signed-off-by: Max Reitz <mreitz@redhat.com>
RFC 7230 section 3.2 indicates that HTTP header field names are case
insensitive.
Signed-off-by: David Edmondson <david.edmondson@oracle.com>
Message-Id: <20200224101310.101169-3-david.edmondson@oracle.com>
Reviewed-by: Max Reitz <mreitz@redhat.com>
Signed-off-by: Max Reitz <mreitz@redhat.com>
RFC 7230 section 3.2 indicates that whitespace is permitted between
the field name and field value and after the field value.
Signed-off-by: David Edmondson <david.edmondson@oracle.com>
Message-Id: <20200224101310.101169-2-david.edmondson@oracle.com>
Reviewed-by: Max Reitz <mreitz@redhat.com>
Signed-off-by: Max Reitz <mreitz@redhat.com>
This test exercises the block/crypto.c "luks" block driver
.bdrv_measure() code.
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Reviewed-by: Max Reitz <mreitz@redhat.com>
Message-Id: <20200221112522.1497712-5-stefanha@redhat.com>
[mreitz: Renamed test from 282 to 288]
Signed-off-by: Max Reitz <mreitz@redhat.com>
In most qemu-img sub-commands the --object option only makes sense when
there is a filename. qemu-img measure is an exception because objects
may be referenced from the image creation options instead of an existing
image file. Allow --object without a filename.
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Reviewed-by: Max Reitz <mreitz@redhat.com>
Message-Id: <20200221112522.1497712-4-stefanha@redhat.com>
Signed-off-by: Max Reitz <mreitz@redhat.com>