We can't however replace the built-in IDE controller, as the one in
pc87312 is only single-channel and can use only IRQ 14. Therefore the
pc87312's IDE function gets disabled via the config property.
PReP emulation also gains a parallel port emulation this way.
Signed-off-by: Hervé Poussineau <hpoussin@reactos.org>
[AF: Use TYPE_PC87312 constant, add to ppc64-softmmu and to MAINTAINERS]
Signed-off-by: Andreas Färber <andreas.faerber@web.de>
This provides floppy and IDE controllers as well as serial and parallel
ports. However, dynamic configuration of devices is not yet supported.
Signed-off-by: Hervé Poussineau <hpoussin@reactos.org>
[AF: QOM'ify, split out header, create CharDriverState if absent]
Signed-off-by: Andreas Färber <andreas.faerber@web.de>
* stefanha/trivial-patches:
ivshmem, qdev-monitor: fix order of qerror parameters
iov_send_recv(): Handle zero bytes case even if OS does not
framebuffer: Fix spelling in comment (leight -> height)
Spelling fix in comment (peripherans -> peripherals)
docs: Fix spelling (propery -> property)
trace: Fix "Qemu" -> "QEMU"
cputlb.c: Fix out of date comment
ehci: fix assertion typo
Makefile: Avoid explicit list of directories in clean target
Now that the QERR_ macros no longer contain a json dictionary,
the order of some parameters needs to be fixed for them to appear
correctly.
Signed-off-by: Alberto Garcia <agarcia@igalia.com>
Reviewed-by: Luiz Capitulino <lcapitulino@redhat.com>
Signed-off-by: Stefan Hajnoczi <stefanha@linux.vnet.ibm.com>
We need at least 1M of RAM to map the option ROM. Otherwise, we will
corrupt host memory or even crash:
$ qemu-system-x86_64 -nodefaults --enable-kvm -vnc :0 -m 640k
Segmentation fault (core dumped)
Reported-and-tested-by: Markus Armbruster <armbru@redhat.com>
Signed-off-by: Jan Kiszka <jan.kiszka@siemens.com>
Signed-off-by: Marcelo Tosatti <mtosatti@redhat.com>
0cdd3d1444 fixed reading back the counter load time from the kernel
while assuming the kernel would always update its load time on writing
the state. That is only true for channel 1, and so pit_get_channel_info
returned wrong output pin states for high counter values.
Fix this by applying the offset also on kvm_pit_put. Now we also need to
update the offset when we write the state while the VM is stopped as it
keeps on changing in that state.
Signed-off-by: Jan Kiszka <jan.kiszka@siemens.com>
Signed-off-by: Marcelo Tosatti <mtosatti@redhat.com>
To prepare the final fix for clock calibration issues with the in-kernel
PIT, we want to cache the offset between vmclock and the clock used by
the in-kernel PIT. So far, we only need to update it when the VM state
changes between running and stopped because we only read the in-kernel
PIT state while the VM is running.
Signed-off-by: Jan Kiszka <jan.kiszka@siemens.com>
Signed-off-by: Marcelo Tosatti <mtosatti@redhat.com>
* qmp/queue/qmp: (48 commits)
target-ppc: add implementation of query-cpu-definitions (v2)
target-i386: add implementation of query-cpu-definitions (v2)
qapi: add query-cpu-definitions command (v2)
compiler: add macro for GCC weak symbols
qapi: add query-machines command
qapi: mark QOM commands stable
qmp: introduce device-list-properties command
qmp: add SUSPEND_DISK event
qmp: qmp-events.txt: add missing doc for the SUSPEND event
qmp: qmp-events.txt: put events in alphabetical order
qmp: emit the WAKEUP event when the guest is put to run
qmp: don't emit the RESET event on wakeup from S3
scripts: qapi-commands.py: qmp-commands.h: include qdict.h
docs: writing-qmp-commands.txt: update error section
error, qerror: drop QDict member
qerror: drop qerror_table and qerror_format()
error, qerror: pass desc string to error calls
error: drop error_get_qobject()/error_set_qobject()
qemu-ga: switch to the new error format on the wire
qmp: switch to the new error format on the wire
...
* pmaydell/arm-devs.next:
arm: Move some ARM devices into libhw
ssd0323: abort() instead of exit(1) on error.
hw/sd.c: make sd_wp_addr() return bool
hw/sd.c: make sd_dataready() return bool
hw/sd.c: convert binary variables to bool
hw/sd.c: introduce wrapper for conversion address to wp group
hw/sd.c: make sd_wp_addr() accept 64 bit address argument
hw/sd.c: convert wp_groups in SDState to bitfield
armv7m: Guard against no -kernel argument
hw/armv7m_nvic: Fix incorrect default for num-irqs property
Emitted when the guest makes a request to enter S4 state.
There are three possible ways of having this event, as described here:
http://lists.gnu.org/archive/html/qemu-devel/2012-07/msg02307.html
I've decided to add a new event and make it indepedent of SHUTDOWN.
This means that the SHUTDOWN event will eventually follow the
SUSPEND_DISK event.
I've choosen this way because of two reasons:
1. Having an indepedent event makes it possible to query for its
existence by using query-events
2. In the future, we may allow the user to change what QEMU should
do as a result of the guest entering S4. So it's a good idea to
keep both events separated
Signed-off-by: Luiz Capitulino <lcapitulino@redhat.com>
Avoids some unnecessary dependencies on cpu.h and prepares for
a future armeb-softmmu where most machines would not be built.
Defer touching the SoC devices since most have implicit or explicit
dependencies on the CPU.
Signed-off-by: Andreas Färber <andreas.faerber@suse.de>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
* qemu-kvm/uq/master:
kvm: Add documentation comment for kvm_irqchip_in_kernel()
kvm: Decouple 'GSI routing' from 'kernel irqchip'
kvm: Decouple 'MSI routing via irqfds' from 'kernel irqchip'
kvm: Decouple 'irqfds usable' from 'kernel irqchip'
kvm: Move kvm_allows_irq0_override() to target-i386, fix return type
kvm: Rename kvm_irqchip_set_irq() to kvm_set_irq()
kvm: Decouple 'async interrupt delivery' from 'kernel irqchip'
configure: Don't implicitly hardcode list of KVM architectures
kvm: Check if smp_cpus exceeds max cpus supported by kvm
To be more consistent with the newer ways of error signalling. That and SIGABT
is easier to debug with than exit(1).
Signed-off-by: Peter A. G. Crosthwaite <peter.crosthwaite@petalogix.com>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
For the sake of code clarity
Signed-off-by: Igor Mitsyanko <i.mitsyanko@samsung.com>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Several members of SDState have type int when they actually are binary variables.
Change type of these variables to bool to improve code readability. Change SD API
to be in consistency with new variables type.
Signed-off-by: Igor Mitsyanko <i.mitsyanko@samsung.com>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Add wrapper function sd_addr_to_wpnum() to replace long address-->wg_group
conversion line.
Signed-off-by: Igor Mitsyanko <i.mitsyanko@samsung.com>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Currently sd_wp_addr() accepts 32 bit address arguments therefore implicitly
restricting SD card address range. Change address argument type to uint64_t.
Signed-off-by: Igor Mitsyanko <i.mitsyanko@samsung.com>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Representing each group write protection flag with only one bit instead of int
variable significantly reduces memory consumption.
Signed-off-by: Igor Mitsyanko <i.mitsyanko@samsung.com>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
A -kernel argument must be specified for this machine. Guard against no -kernel
argument. Previously gave an unhelpful "bad address" error message.
Signed-off-by: Peter A. G. Crosthwaite <peter.crosthwaite@petalogix.com>
Tested-by: Markus Armbruster <armbru@redhat.com>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Fix an incorrect default value for the num-irqs property (we were
attempting to override it from the default set by the parent class
but not succeeding, which meant that the lm3s6965evb model would
assert on startup attempting to wire up nonexistent irq lines).
Instead of trying to override the parent's Property array, we
define an instance_init function which runs after default setup
but before user property setting and can just fix up the default
value in the gic_state struct.
Reported-by: Peter Crosthwaite <peter.crosthwaite@petalogix.com>
Tested-by: Peter Crosthwaite <peter.crosthwaite@petalogix.com>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Re-implemented the interconnect between the Xilinx AXI ethernet and DMA
controllers. A QOM interface "stream" is created, for the two stream interfaces.
As per Edgars request, this is designed to be more generic than AXI-stream,
so in the future we may see more clients of this interface beyond AXI stream.
This is based primarily on Paolos original refactoring of the interconnect.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Peter A.G. Crosthwaite <peter.crosthwaite@petalogix.com>
Signed-off-by: Edgar E. Iglesias <edgar.iglesias@gmail.com>
* kwolf/for-anthony:
qemu-iotests: skip 039 with ./check -nocache
block: add BLOCK_O_CHECK for qemu-img check
qcow2: mark image clean after repair succeeds
qed: mark image clean after repair succeeds
blockdev: flip default cache mode from writethrough to writeback
virtio-blk: disable write cache if not negotiated
virtio-blk: support VIRTIO_BLK_F_CONFIG_WCE
qemu-iotests: Save some sed processes
ahci: Fix sglist memleak in ahci_dma_rw_buf()
ahci: Fix ahci cdrom read corruptions for reads > 128k
virtio-blk: fix use-after-free while handling scsi commands
* bonzini/scsi-next:
scsi-disk: add support for the UNMAP command
scsi-disk: improve out-of-range LBA detection for WRITE SAME
scsi-disk: more assertions and resets for aiocb
virtio-scsi: do not compare 32-bit QEMU tags against 64-bit virtio-scsi tags
iscsi: Pick default initiator-name based on the name of the VM
iscsi: reorganize code for parse_initiator_name
iscsi: do not leak initiator_name
This patch sets is_default to 1 for puv3 machine, so that
find_default_machine() returns puv3 machine.
Thanks Dunrong for pointing it out.
Cc: Dunrong Huang <riegamaths@gmail.com>
Signed-off-by: Guan Xuetao <gxt@mprc.pku.edu.cn>
Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
This patch adds puv3 dma (Direct Memory Access) support,
include dma device simulation for kernel booting.
v1->v2: Add initialization to ret in puv3_dma_read.
Signed-off-by: Guan Xuetao <gxt@mprc.pku.edu.cn>
Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
This patch adds puv3 pm (power management) support,
include pm device simulation for kernel booting.
Thank Blue Swirl for pointing out the missing "break".
v1->v2: Add initialization to ret in puv3_pm_read.
Signed-off-by: Guan Xuetao <gxt@mprc.pku.edu.cn>
Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
This patch adds puv3 gpio (General Purpose Input/Output) support,
include gpio device simulation and its interrupt support.
v1->v2: Add initialization to ret in puv3_gpio_read.
Signed-off-by: Guan Xuetao <gxt@mprc.pku.edu.cn>
Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
This patch adds puv3 ostimer support, include os timer
device simulation and ptimer support in puv3 machine.
Signed-off-by: Guan Xuetao <gxt@mprc.pku.edu.cn>
Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
This patch adds puv3 interrupt support, include interrupt controler
device simulation and interrupt handler in puv3 machine.
Signed-off-by: Guan Xuetao <gxt@mprc.pku.edu.cn>
Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
This patch only add puv3 soc/board support, which introduces puv3
machine description, and specifies console type.
Signed-off-by: Guan Xuetao <gxt@mprc.pku.edu.cn>
Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
This patch adds unicore32-softmmu build support, include configure,
makefile, arch_init, and all missing functions needed by softmmu.
Although all missing functions are empty, unicore32-softmmu could
be build successfully.
By 20120804: change QEMU_ARCH_UNICORE32 to 0x4000
Signed-off-by: Guan Xuetao <gxt@mprc.pku.edu.cn>
Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
If the guest does not support flushes, we should run in writethrough mode.
The setting is temporary until the next reset, so that for example the
BIOS will run in writethrough mode while Linux will run with a writeback
cache.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Also rename VIRTIO_BLK_F_WCACHE to VIRTIO_BLK_F_WCE for consistency with
the spec.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
I noticed that in hw/ide/ahci:ahci_dma_rw_buf() we do not free the sglist. Thus,
I've added a call to qemu_sglist_destroy() to fix this memory leak.
In addition, I've adeed a call in qemu_sglist_destroy() to 0 all of the sglist
fields, in case there is some other codepath that tries to free the sglist.
Signed-off-by: Jason Baron <jbaron@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
While testing q35, which has its cdrom attached to the ahci controller, I found
that the Fedora 17 install would panic on boot. The panic occurs while
squashfs is trying to read from the cdrom. The errors are:
[ 8.622711] SQUASHFS error: xz_dec_run error, data probably corrupt
[ 8.625180] SQUASHFS error: squashfs_read_data failed to read block
0x20be48a
I was also able to produce corrupt data reads using an installed piix based
qemu machine, using 'dd'. I found that the corruptions were only occuring when
then read size was greater than 128k. For example, the following command
results in corrupted reads:
dd if=/dev/sr0 of=/tmp/blah bs=256k iflag=direct
The > 128k size reads exercise a different code path than 128k and below. In
ide_atapi_cmd_read_dma_cb() s->io_buffer_size is capped at 128k. Thus,
ide_atapi_cmd_read_dma_cb() is called a second time when the read is > 128k.
However, ahci_dma_rw_buf() restart the read from offset 0, instead of at 128k.
Thus, resulting in a corrupted read.
To fix this, I've introduced 'io_buffer_offset' field in IDEState to keep
track of the offset. I've also modified ahci_populate_sglist() to take a new
3rd offset argument, so that the sglist is property initialized.
I've tested this patch using 'dd' testing, and Fedora 17 now correctly boots
and installs on q35 with the cdrom ahci controller.
Signed-off-by: Jason Baron <jbaron@redhat.com>
Tested-by: Andreas Färber <afaerber@suse.de>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
The scsi passthrough handler falls through after completing a
request into the failure path, resulting in a use after free.
Reproducible by running a guest with aio=native on a block device.
Reported-by: Stefan Priebe <s.priebe@profihost.ag>
Signed-off-by: Avi Kivity <avi@redhat.com>
Signed-off-by: Stefan Hajnoczi <stefanha@linux.vnet.ibm.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
This fixes the following error:
$ qemu-system-xtensa -cpu help
Segmentation fault
Signed-off-by: Max Filippov <jcmvbkbc@gmail.com>
Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
This makes usable default for -cpu option both for qemu-system-xtensa
and qemu-system-xtensaeb fixing the following error:
$ qemu-system-xtensaeb -M sim
Unable to find CPU definition
Signed-off-by: Max Filippov <jcmvbkbc@gmail.com>
Tested-by: Markus Armbruster <armbru@redhat.com>
Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
LOAD_UNLOAD and START_STOP have same value, so the table
entry is initialized twice. Spotted by Clang compiler.
Remove LOAD_UNLOAD entry since START_STOP entry already
represents both.
Reviewed-by: Markus Armbruster <armbru@redhat.com>
Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
The qemu_irq for Terminal Count (TC) line between FDC and Slavio misc
device was created only after use, spotted by Clang compiler. Also,
it was not created if the FDC didn't exist.
Rearrange code to fix order. Always create the TC line.
Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
Difference with AMD PCscsi is that DC-390 contains a EEPROM,
and that a romfile is available to add INT13 support.
This has been successfully tested on:
- MS DOS 6.22 (using DC390 ASPI driver)
- MS Windows 98 SE (using DC390 driver)
- MS Windows NT 3.1 (using DC390 driver)
- MS Windows NT 4.0 (using DC390 driver)
- hard disk and cdrom boot
Signed-off-by: Hervé Poussineau <hpoussin@reactos.org>
Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
This reverts commit 0883c5159f.
Those stubs were only used by PCI ESP emulation, which is now
not compiled on architectures which have no PCI bus support.
Signed-off-by: Hervé Poussineau <hpoussin@reactos.org>
Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
sparc machines loose ability to instanciate PCI ESP SCSI adapter,
which is not a big loose as they don't have PCI bus support.
Signed-off-by: Hervé Poussineau <hpoussin@reactos.org>
Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
