We support coordinated discarding of RAM using the RamDiscardManager for
the VFIO_TYPE1 iommus. Let's unlock support for coordinated discards,
keeping uncoordinated discards (e.g., via virtio-balloon) disabled if
possible.
This unlocks virtio-mem + vfio on x86-64. Note that vfio used via "nvme://"
by the block layer has to be implemented/unlocked separately. For now,
virtio-mem only supports x86-64; we don't restrict RamDiscardManager to
x86-64, though: arm64 and s390x are supposed to work as well, and we'll
test once unlocking virtio-mem support. The spapr IOMMUs will need special
care, to be tackled later, e.g.., once supporting virtio-mem.
Note: The block size of a virtio-mem device has to be set to sane sizes,
depending on the maximum hotplug size - to not run out of vfio mappings.
The default virtio-mem block size is usually in the range of a couple of
MBs. The maximum number of mapping is 64k, shared with other users.
Assume you want to hotplug 256GB using virtio-mem - the block size would
have to be set to at least 8 MiB (resulting in 32768 separate mappings).
Acked-by: Alex Williamson <alex.williamson@redhat.com>
Reviewed-by: Alex Williamson <alex.williamson@redhat.com>
Acked-by: Michael S. Tsirkin <mst@redhat.com>
Cc: Paolo Bonzini <pbonzini@redhat.com>
Cc: "Michael S. Tsirkin" <mst@redhat.com>
Cc: Alex Williamson <alex.williamson@redhat.com>
Cc: Dr. David Alan Gilbert <dgilbert@redhat.com>
Cc: Igor Mammedov <imammedo@redhat.com>
Cc: Pankaj Gupta <pankaj.gupta.linux@gmail.com>
Cc: Peter Xu <peterx@redhat.com>
Cc: Auger Eric <eric.auger@redhat.com>
Cc: Wei Yang <richard.weiyang@linux.alibaba.com>
Cc: teawater <teawaterz@linux.alibaba.com>
Cc: Marek Kedzierski <mkedzier@redhat.com>
Signed-off-by: David Hildenbrand <david@redhat.com>
Message-Id: <20210413095531.25603-14-david@redhat.com>
Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
We implement the RamDiscardManager interface and only require coordinated
discarding of RAM to work.
Reviewed-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Reviewed-by: Pankaj Gupta <pankaj.gupta@cloud.ionos.com>
Acked-by: Michael S. Tsirkin <mst@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Cc: Paolo Bonzini <pbonzini@redhat.com>
Cc: "Michael S. Tsirkin" <mst@redhat.com>
Cc: Alex Williamson <alex.williamson@redhat.com>
Cc: Dr. David Alan Gilbert <dgilbert@redhat.com>
Cc: Igor Mammedov <imammedo@redhat.com>
Cc: Pankaj Gupta <pankaj.gupta.linux@gmail.com>
Cc: Peter Xu <peterx@redhat.com>
Cc: Auger Eric <eric.auger@redhat.com>
Cc: Wei Yang <richard.weiyang@linux.alibaba.com>
Cc: teawater <teawaterz@linux.alibaba.com>
Cc: Marek Kedzierski <mkedzier@redhat.com>
Signed-off-by: David Hildenbrand <david@redhat.com>
Message-Id: <20210413095531.25603-13-david@redhat.com>
Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
vIOMMU support works already with RamDiscardManager as long as guests only
map populated memory. Both, populated and discarded memory is mapped
into &address_space_memory, where vfio_get_xlat_addr() will find that
memory, to create the vfio mapping.
Sane guests will never map discarded memory (e.g., unplugged memory
blocks in virtio-mem) into an IOMMU - or keep it mapped into an IOMMU while
memory is getting discarded. However, there are two cases where a malicious
guests could trigger pinning of more memory than intended.
One case is easy to handle: the guest trying to map discarded memory
into an IOMMU.
The other case is harder to handle: the guest keeping memory mapped in
the IOMMU while it is getting discarded. We would have to walk over all
mappings when discarding memory and identify if any mapping would be a
violation. Let's keep it simple for now and print a warning, indicating
that setting RLIMIT_MEMLOCK can mitigate such attacks.
We have to take care of incoming migration: at the point the
IOMMUs get restored and start creating mappings in vfio, RamDiscardManager
implementations might not be back up and running yet: let's add runstate
priorities to enforce the order when restoring.
Acked-by: Alex Williamson <alex.williamson@redhat.com>
Reviewed-by: Alex Williamson <alex.williamson@redhat.com>
Acked-by: Michael S. Tsirkin <mst@redhat.com>
Cc: Paolo Bonzini <pbonzini@redhat.com>
Cc: "Michael S. Tsirkin" <mst@redhat.com>
Cc: Alex Williamson <alex.williamson@redhat.com>
Cc: Dr. David Alan Gilbert <dgilbert@redhat.com>
Cc: Igor Mammedov <imammedo@redhat.com>
Cc: Pankaj Gupta <pankaj.gupta.linux@gmail.com>
Cc: Peter Xu <peterx@redhat.com>
Cc: Auger Eric <eric.auger@redhat.com>
Cc: Wei Yang <richard.weiyang@linux.alibaba.com>
Cc: teawater <teawaterz@linux.alibaba.com>
Cc: Marek Kedzierski <mkedzier@redhat.com>
Signed-off-by: David Hildenbrand <david@redhat.com>
Message-Id: <20210413095531.25603-10-david@redhat.com>
Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
Although RamDiscardManager can handle running into the maximum number of
DMA mappings by propagating errors when creating a DMA mapping, we want
to sanity check and warn the user early that there is a theoretical setup
issue and that virtio-mem might not be able to provide as much memory
towards a VM as desired.
As suggested by Alex, let's use the number of KVM memory slots to guess
how many other mappings we might see over time.
Acked-by: Alex Williamson <alex.williamson@redhat.com>
Reviewed-by: Alex Williamson <alex.williamson@redhat.com>
Acked-by: Michael S. Tsirkin <mst@redhat.com>
Cc: Paolo Bonzini <pbonzini@redhat.com>
Cc: "Michael S. Tsirkin" <mst@redhat.com>
Cc: Alex Williamson <alex.williamson@redhat.com>
Cc: Dr. David Alan Gilbert <dgilbert@redhat.com>
Cc: Igor Mammedov <imammedo@redhat.com>
Cc: Pankaj Gupta <pankaj.gupta.linux@gmail.com>
Cc: Peter Xu <peterx@redhat.com>
Cc: Auger Eric <eric.auger@redhat.com>
Cc: Wei Yang <richard.weiyang@linux.alibaba.com>
Cc: teawater <teawaterz@linux.alibaba.com>
Cc: Marek Kedzierski <mkedzier@redhat.com>
Signed-off-by: David Hildenbrand <david@redhat.com>
Message-Id: <20210413095531.25603-9-david@redhat.com>
Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
Let's query the maximum number of possible DMA mappings by querying the
available mappings when creating the container (before any mappings are
created). We'll use this informaton soon to perform some sanity checks
and warn the user.
Reviewed-by: Alex Williamson <alex.williamson@redhat.com>
Acked-by: Alex Williamson <alex.williamson@redhat.com>
Acked-by: Michael S. Tsirkin <mst@redhat.com>
Cc: Paolo Bonzini <pbonzini@redhat.com>
Cc: "Michael S. Tsirkin" <mst@redhat.com>
Cc: Alex Williamson <alex.williamson@redhat.com>
Cc: Dr. David Alan Gilbert <dgilbert@redhat.com>
Cc: Igor Mammedov <imammedo@redhat.com>
Cc: Pankaj Gupta <pankaj.gupta.linux@gmail.com>
Cc: Peter Xu <peterx@redhat.com>
Cc: Auger Eric <eric.auger@redhat.com>
Cc: Wei Yang <richard.weiyang@linux.alibaba.com>
Cc: teawater <teawaterz@linux.alibaba.com>
Cc: Marek Kedzierski <mkedzier@redhat.com>
Signed-off-by: David Hildenbrand <david@redhat.com>
Message-Id: <20210413095531.25603-8-david@redhat.com>
Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
Implement support for RamDiscardManager, to prepare for virtio-mem
support. Instead of mapping the whole memory section, we only map
"populated" parts and update the mapping when notified about
discarding/population of memory via the RamDiscardListener. Similarly, when
syncing the dirty bitmaps, sync only the actually mapped (populated) parts
by replaying via the notifier.
Using virtio-mem with vfio is still blocked via
ram_block_discard_disable()/ram_block_discard_require() after this patch.
Reviewed-by: Alex Williamson <alex.williamson@redhat.com>
Acked-by: Alex Williamson <alex.williamson@redhat.com>
Acked-by: Michael S. Tsirkin <mst@redhat.com>
Cc: Paolo Bonzini <pbonzini@redhat.com>
Cc: "Michael S. Tsirkin" <mst@redhat.com>
Cc: Alex Williamson <alex.williamson@redhat.com>
Cc: Dr. David Alan Gilbert <dgilbert@redhat.com>
Cc: Igor Mammedov <imammedo@redhat.com>
Cc: Pankaj Gupta <pankaj.gupta.linux@gmail.com>
Cc: Peter Xu <peterx@redhat.com>
Cc: Auger Eric <eric.auger@redhat.com>
Cc: Wei Yang <richard.weiyang@linux.alibaba.com>
Cc: teawater <teawaterz@linux.alibaba.com>
Cc: Marek Kedzierski <mkedzier@redhat.com>
Signed-off-by: David Hildenbrand <david@redhat.com>
Message-Id: <20210413095531.25603-7-david@redhat.com>
Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
Let's properly notify when (un)plugging blocks, after discarding memory
and before allowing the guest to consume memory. Handle errors from
notifiers gracefully (e.g., no remaining VFIO mappings) when plugging,
rolling back the change and telling the guest that the VM is busy.
One special case to take care of is replaying all notifications after
restoring the vmstate. The device starts out with all memory discarded,
so after loading the vmstate, we have to notify about all plugged
blocks.
Acked-by: Michael S. Tsirkin <mst@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Cc: Paolo Bonzini <pbonzini@redhat.com>
Cc: "Michael S. Tsirkin" <mst@redhat.com>
Cc: Alex Williamson <alex.williamson@redhat.com>
Cc: Dr. David Alan Gilbert <dgilbert@redhat.com>
Cc: Igor Mammedov <imammedo@redhat.com>
Cc: Pankaj Gupta <pankaj.gupta.linux@gmail.com>
Cc: Peter Xu <peterx@redhat.com>
Cc: Auger Eric <eric.auger@redhat.com>
Cc: Wei Yang <richard.weiyang@linux.alibaba.com>
Cc: teawater <teawaterz@linux.alibaba.com>
Cc: Marek Kedzierski <mkedzier@redhat.com>
Signed-off-by: David Hildenbrand <david@redhat.com>
Message-Id: <20210413095531.25603-6-david@redhat.com>
Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
Any errors are unexpected and ram_block_discard_range() already properly
prints errors. Let's stop manually reporting errors.
Cc: Paolo Bonzini <pbonzini@redhat.com>
Cc: "Michael S. Tsirkin" <mst@redhat.com>
Cc: Alex Williamson <alex.williamson@redhat.com>
Cc: Dr. David Alan Gilbert <dgilbert@redhat.com>
Cc: Igor Mammedov <imammedo@redhat.com>
Cc: Pankaj Gupta <pankaj.gupta.linux@gmail.com>
Cc: Peter Xu <peterx@redhat.com>
Cc: Auger Eric <eric.auger@redhat.com>
Cc: Wei Yang <richard.weiyang@linux.alibaba.com>
Cc: teawater <teawaterz@linux.alibaba.com>
Cc: Marek Kedzierski <mkedzier@redhat.com>
Signed-off-by: David Hildenbrand <david@redhat.com>
Message-Id: <20210413095531.25603-5-david@redhat.com>
Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
Let's factor out the core logic, no need to replicate.
Reviewed-by: Pankaj Gupta <pankaj.gupta@cloud.ionos.com>
Acked-by: Michael S. Tsirkin <mst@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Cc: Paolo Bonzini <pbonzini@redhat.com>
Cc: "Michael S. Tsirkin" <mst@redhat.com>
Cc: Alex Williamson <alex.williamson@redhat.com>
Cc: Dr. David Alan Gilbert <dgilbert@redhat.com>
Cc: Igor Mammedov <imammedo@redhat.com>
Cc: Pankaj Gupta <pankaj.gupta.linux@gmail.com>
Cc: Peter Xu <peterx@redhat.com>
Cc: Auger Eric <eric.auger@redhat.com>
Cc: Wei Yang <richard.weiyang@linux.alibaba.com>
Cc: teawater <teawaterz@linux.alibaba.com>
Cc: Marek Kedzierski <mkedzier@redhat.com>
Signed-off-by: David Hildenbrand <david@redhat.com>
Message-Id: <20210413095531.25603-4-david@redhat.com>
Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
Having properties registered conditionally makes QOM type
introspection difficult. Instead of skipping registration of the
"instanceid" property, always register the property but validate
its value against the instance id required by the class.
Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
Acked-by: Maciej S. Szmigiero <maciej.szmigiero@oracle.com>
Message-Id: <20201009200701.1830060-1-ehabkost@redhat.com>
Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
* Generalize XSAVE area offset so that it matches AMD processors on KVM
* Improvements for -display and deprecation of -no-quit
* Enable SMP configuration as a compound machine property ("-M smp.cpus=...")
* Haiku compilation fix
* Add icon on Darwin
-----BEGIN PGP SIGNATURE-----
iQFIBAABCAAyFiEE8TM4V0tmI4mGbHaCv/vSX3jHroMFAmDkB7sUHHBib256aW5p
QHJlZGhhdC5jb20ACgkQv/vSX3jHroOISgf+Nn5BiXQRY52DK/2PoG330F6UeOcp
kWFAE4k4qEktDiCcd5xKekiUd7h+TiRS8bLeycmRtiSXvbzXioE2eCelui0SZDQl
zpIb8wV2WaxrD/zUYPV7r5n+VFAaTCm9lUEzzqnwaThBG/Oat45gnossZEIWv85g
KtQMsSh3pc+KpTjWbIA8V01ohzwFE2q7cA9CB/pDgR3h8M5p4K0ZdaPoAO2auhvu
2sbu9oBl1JwqpIhPme9JR6Je5fMCILBRlXTvPgJ/0iaGdxcNmZxoflO/TZVFB1pl
tUiCu0GB0yEasMO1E6+cP7ezhm15Lz3vKqjr/boV5Y9osfU36k9xkLTvAg==
=itIm
-----END PGP SIGNATURE-----
Merge remote-tracking branch 'remotes/bonzini-gitlab/tags/for-upstream' into staging
* More Meson test conversions and configure cleanups
* Generalize XSAVE area offset so that it matches AMD processors on KVM
* Improvements for -display and deprecation of -no-quit
* Enable SMP configuration as a compound machine property ("-M smp.cpus=...")
* Haiku compilation fix
* Add icon on Darwin
# gpg: Signature made Tue 06 Jul 2021 08:35:23 BST
# gpg: using RSA key F13338574B662389866C7682BFFBD25F78C7AE83
# gpg: issuer "pbonzini@redhat.com"
# gpg: Good signature from "Paolo Bonzini <bonzini@gnu.org>" [full]
# gpg: aka "Paolo Bonzini <pbonzini@redhat.com>" [full]
# Primary key fingerprint: 46F5 9FBD 57D6 12E7 BFD4 E2F7 7E15 100C CD36 69B1
# Subkey fingerprint: F133 3857 4B66 2389 866C 7682 BFFB D25F 78C7 AE83
* remotes/bonzini-gitlab/tags/for-upstream: (40 commits)
config-host.mak: remove unused compiler-related lines
Set icon for QEMU binary on Mac OS
qemu-option: remove now-dead code
machine: add smp compound property
vl: switch -M parsing to keyval
keyval: introduce keyval_parse_into
keyval: introduce keyval_merge
qom: export more functions for use with non-UserCreatable objects
configure: convert compiler tests to meson, part 6
configure: convert compiler tests to meson, part 5
configure: convert compiler tests to meson, part 4
configure: convert compiler tests to meson, part 3
configure: convert compiler tests to meson, part 2
configure: convert compiler tests to meson, part 1
configure: convert HAVE_BROKEN_SIZE_MAX to meson
configure, meson: move CONFIG_IVSHMEM to meson
meson: store dependency('threads') in a variable
meson: sort existing compiler tests
configure, meson: convert libxml2 detection to meson
configure, meson: convert liburing detection to meson
...
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Make -smp syntactic sugar for a compound property "-machine
smp.{cores,threads,cpu,...}". machine_smp_parse is replaced by the
setter for the property.
numa-test will now cover the new syntax, while other tests
still use -smp.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
As with previous performance optimization on Treaddir handling;
reduce the overall latency, i.e. overall time spent on processing
a Twalk request by reducing the amount of thread hops between the
9p server's main thread and fs worker thread(s).
In fact this patch even reduces the thread hops for Twalk handling
to its theoritical minimum of exactly 2 thread hops:
main thread -> fs worker thread -> main thread
This is achieved by doing all the required fs driver tasks altogether
in a single v9fs_co_run_in_worker({ ... }); code block.
Signed-off-by: Christian Schoenebeck <qemu_oss@crudebyte.com>
Reviewed-by: Greg Kurz <groug@kaod.org>
Message-Id: <1a6701674afc4f08d40396e3aa2631e18a4dbb33.1622821729.git.qemu_oss@crudebyte.com>
There is no longer a user of root_qid, so drop it.
Signed-off-by: Christian Schoenebeck <qemu_oss@crudebyte.com>
Reviewed-by: Greg Kurz <groug@kaod.org>
Message-Id: <6896dd161d3257db6b0513842a14f87ca191fdf6.1622821729.git.qemu_oss@crudebyte.com>
As we are actually only comparing the filesystem ID (i.e. device number
and inode number pair) let's use the POSIX stat buffer instead of QIDs,
because resolving QIDs requires to be done on 9p server's main thread
only as it might mutate the server state if inode remapping is enabled.
Signed-off-by: Christian Schoenebeck <qemu_oss@crudebyte.com>
Reviewed-by: Greg Kurz <groug@kaod.org>
Message-Id: <26aa465ff9cc9c07e053331554a02fdae3994417.1622821729.git.qemu_oss@crudebyte.com>
There is only one user of fid_to_qid() which is v9fs_walk(). Let's
open-code fid_to_qid() directly within v9fs_walk(), because
fid_to_qid() hides the POSIX stat buffer which we are going to need
in the subsequent patch.
Signed-off-by: Christian Schoenebeck <qemu_oss@crudebyte.com>
Reviewed-by: Greg Kurz <groug@kaod.org>
Message-Id: <e9a4c9c7a0792ed4db6578d105a0823ea05bc324.1622821729.git.qemu_oss@crudebyte.com>
We already capture the QID of the exported 9p root path, i.e. to
prevent client access outside the defined, exported filesystem's tree.
This is currently checked by comparing the root QID with another FID's
QID.
The problem with the latter is that resolving a QID of any given 9p path
can only be done on 9p server's main thread, that's because it might
mutate the server's state if inode remapping is enabled.
For that reason also capture the POSIX stat info of the root path for
being able to identify on any (e.g. worker) thread whether an
arbitrary given path is identical to the export root.
Signed-off-by: Christian Schoenebeck <qemu_oss@crudebyte.com>
Reviewed-by: Greg Kurz <groug@kaod.org>
Message-Id: <eb07d6c2e9925788454cfe33d3802e4ffb23ea9a.1622821729.git.qemu_oss@crudebyte.com>
There is only one user of not_same_qid() which is v9fs_walk() and the
latter is using it for comparing a client supplied path with the 9p
export root path, for the sole purpose to prevent a Twalk request
from escaping from the exported 9p tree via "..".
However for that specific purpose the implementation of not_same_qid()
is wrong; if mtime of the 9p export root path changed between Tattach
and Twalk then not_same_qid() returns true when actually comparing
against the export root path.
To fix for the actual semantic being used, only compare QID path
members, but do not compare version or type members.
Signed-off-by: Christian Schoenebeck <qemu_oss@crudebyte.com>
Reviewed-by: Greg Kurz <groug@kaod.org>
Message-Id: <ca0abae4a899d81c6e87f683732d6c1f56915232.1622821729.git.qemu_oss@crudebyte.com>
There is only one comparison between nwnames and P9_MAXWELEM required.
Signed-off-by: Christian Schoenebeck <qemu_oss@crudebyte.com>
Reviewed-by: Greg Kurz <groug@kaod.org>
Message-Id: <E1liKiz-0006BC-Ja@lizzy.crudebyte.com>
To lower the entry level for new developers, add a link to the 9p
developer docs (i.e. qemu wiki) to MAINTAINERS and to the beginning of
9p source files, that is to: https://wiki.qemu.org/Documentation/9p
Signed-off-by: Christian Schoenebeck <qemu_oss@crudebyte.com>
Acked-by: Greg Kurz <groug@kaod.org>
Message-Id: <E1leeDf-0008GZ-9q@lizzy.crudebyte.com>
Several CVE fixes for the PVRDMA device.
-----BEGIN PGP SIGNATURE-----
iQEcBAABAgAGBQJg4hJVAAoJEDbUwPDPL+RtGEkIAJs7yas9LdaP80scaEQ3UiOJ
Mr9M2+RwoUm19YhrM2MqjIByluB5Jk2bO1ZmpuJmeg03V15I8AV8MozKGAzZaThx
8LVwduqlmdnrprBYKVRRn/SLSqbMkRSXGli9BjX2PoF97VeqvhNOxH1hL6z8Ytn6
zzpsOSq7NmC87hLdvL2UIkpYy1Z4bUjAWr1wn7K6jIhM163pek61rmO9eWwc7W3y
M1lXtGtrLgE0AuLm0oEJwz0xqlOuN8ld5kwIEu33RnL8phLwT0hDjHoLPqIX79bS
UdIL1zNjwXKI0DkR5EoVLRMdF87b3LMfVEvij25PNLPf6gyyh5FHmdqQi0r3sZU=
=MrNO
-----END PGP SIGNATURE-----
Merge remote-tracking branch 'remotes/marcel/tags/pvrdma-04-07-2021-v2' into staging
PVRDMA queue
Several CVE fixes for the PVRDMA device.
# gpg: Signature made Sun 04 Jul 2021 20:56:05 BST
# gpg: using RSA key 36D4C0F0CF2FE46D
# gpg: Good signature from "Marcel Apfelbaum <marcel.apfelbaum@zoho.com>" [marginal]
# gpg: aka "Marcel Apfelbaum <marcel@redhat.com>" [marginal]
# gpg: aka "Marcel Apfelbaum <marcel.apfelbaum@gmail.com>" [marginal]
# gpg: WARNING: This key is not certified with sufficiently trusted signatures!
# gpg: It is not certain that the signature belongs to the owner.
# Primary key fingerprint: B1C6 3A57 F92E 08F2 640F 31F5 36D4 C0F0 CF2F E46D
* remotes/marcel/tags/pvrdma-04-07-2021-v2:
pvrdma: Fix the ring init error flow (CVE-2021-3608)
pvrdma: Ensure correct input on ring init (CVE-2021-3607)
hw/rdma: Fix possible mremap overflow in the pvrdma device (CVE-2021-3582)
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
- Extract nanoMIPS, microMIPS, Code Compaction from translate.c
- Allow PCI config accesses smaller than 32-bit on Bonito64 device
- Fix migration of g364fb device on Jazz Magnum
- Fix dp8393x PROM checksum on Jazz Magnum and Quadra 800
- Map the UART devices unconditionally on Jazz Magnum
- Add functional test booting Linux on the Fuloong 2E
-----BEGIN PGP SIGNATURE-----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=rR+B
-----END PGP SIGNATURE-----
Merge remote-tracking branch 'remotes/philmd/tags/mips-20210702' into staging
MIPS patches queue
- Extract nanoMIPS, microMIPS, Code Compaction from translate.c
- Allow PCI config accesses smaller than 32-bit on Bonito64 device
- Fix migration of g364fb device on Jazz Magnum
- Fix dp8393x PROM checksum on Jazz Magnum and Quadra 800
- Map the UART devices unconditionally on Jazz Magnum
- Add functional test booting Linux on the Fuloong 2E
# gpg: Signature made Fri 02 Jul 2021 16:36:19 BST
# gpg: using RSA key FAABE75E12917221DCFD6BB2E3E32C2CDEADC0DE
# gpg: Good signature from "Philippe Mathieu-Daudé (F4BUG) <f4bug@amsat.org>" [full]
# Primary key fingerprint: FAAB E75E 1291 7221 DCFD 6BB2 E3E3 2C2C DEAD C0DE
* remotes/philmd/tags/mips-20210702:
hw/mips/jazz: Map the UART devices unconditionally
hw/mips/jazz: specify correct endian for dp8393x device
hw/m68k/q800: fix PROM checksum and MAC address storage
qemu/bitops.h: add bitrev8 implementation
dp8393x: remove onboard PROM containing MAC address and checksum
hw/m68k/q800: move PROM and checksum calculation from dp8393x device to board
hw/mips/jazz: move PROM and checksum calculation from dp8393x device to board
dp8393x: convert to trace-events
dp8393x: checkpatch fixes
g364fb: add VMStateDescription for G364SysBusState
g364fb: use RAM memory region for framebuffer
tests/acceptance: Test Linux on the Fuloong 2E machine
hw/pci-host/bonito: Allow PCI config accesses smaller than 32-bit
hw/pci-host/bonito: Trace PCI config accesses smaller than 32-bit
target/mips: Extract nanoMIPS ISA translation routines
target/mips: Extract the microMIPS ISA translation routines
target/mips: Extract Code Compaction ASE translation routines
target/mips: Add declarations for generic TCG helpers
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
When using the Magnum ARC firmware we can see accesses to the
UART1 being rejected, because the device is not mapped:
$ qemu-system-mips64el -M magnum -d guest_errors,unimp -bios NTPROM.RAW
Invalid access at addr 0x80007004, size 1, region '(null)', reason: rejected
Invalid access at addr 0x80007001, size 1, region '(null)', reason: rejected
Invalid access at addr 0x80007002, size 1, region '(null)', reason: rejected
Invalid access at addr 0x80007003, size 1, region '(null)', reason: rejected
Invalid access at addr 0x80007004, size 1, region '(null)', reason: rejected
Since both UARTs are present (soldered on the board) regardless
of whether there are character devices connected, map them
unconditionally.
(This code pre-dated commit 12051d82f0 which made it safe to pass
NULL in as a chardev to serial devices.)
Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Message-Id: <20210629053704.2584504-1-f4bug@amsat.org>
The MIPS magnum machines are available in both big endian (mips64) and little
endian (mips64el) configurations. Ensure that the dp893x big_endian property
is set accordingly using logic similar to that used for the MIPS malta
machines.
Signed-off-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
Tested-by: Finn Thain <fthain@linux-m68k.org>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Message-Id: <20210625065401.30170-11-mark.cave-ayland@ilande.co.uk>
Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
The checksum used by MacOS to validate the PROM content is an exclusive-OR
rather than a sum over the corresponding bytes. In addition the MAC address
must be stored in bit-reversed format as indicated in comments in Linux's
macsonic.c.
With the PROM contents fixed MacOS starts to probe the device registers
when AppleTalk is enabled in the Control Panel.
Signed-off-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
Tested-by: Finn Thain <fthain@linux-m68k.org>
Message-Id: <20210625065401.30170-8-mark.cave-ayland@ilande.co.uk>
Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
According to the datasheet the dp8393x chipset does not contain any NVRAM capable
of storing a MAC address or checksum. Now that both the MIPS jazz and m68k q800
boards generate the PROM region and checksum themselves, remove the generated
PROM from the dp8393x device itself.
Signed-off-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
Tested-by: Finn Thain <fthain@linux-m68k.org>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Message-Id: <20210625065401.30170-6-mark.cave-ayland@ilande.co.uk>
Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
This is in preparation for each board to have its own separate bit storage
format and checksum for storing the MAC address.
Signed-off-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
Tested-by: Finn Thain <fthain@linux-m68k.org>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Message-Id: <20210625065401.30170-5-mark.cave-ayland@ilande.co.uk>
Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
This is in preparation for each board to have its own separate bit storage
format and checksum for storing the MAC address.
Signed-off-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
Tested-by: Finn Thain <fthain@linux-m68k.org>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Message-Id: <20210625065401.30170-4-mark.cave-ayland@ilande.co.uk>
Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Signed-off-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Tested-by: Finn Thain <fthain@linux-m68k.org>
Message-Id: <20210625065401.30170-3-mark.cave-ayland@ilande.co.uk>
Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Also fix a simple comment typo of "constrainst" to "constraints".
Signed-off-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Tested-by: Finn Thain <fthain@linux-m68k.org>
Message-Id: <20210625065401.30170-2-mark.cave-ayland@ilande.co.uk>
Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Currently when QEMU attempts to migrate the MIPS magnum machine it crashes due
to a mistake in the g364fb VMStateDescription configuration which expects a
G364SysBusState and not a G364State.
Resolve the issue by adding a new VMStateDescription for G364SysBusState and
embedding the existing vmstate_g364fb VMStateDescription inside it using
VMSTATE_STRUCT.
Signed-off-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
Fixes: 97a3f6ffbb ("g364fb: convert to qdev")
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Message-Id: <20210625163554.14879-3-mark.cave-ayland@ilande.co.uk>
Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Since the migration stream is already broken, we can use this opportunity to
change the framebuffer so that it is migrated as a RAM memory region rather
than as an array of bytes.
In particular this helps the output of the analyze-migration.py tool which
no longer contains a huge array representing the framebuffer contents.
Signed-off-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Message-Id: <20210625163554.14879-2-mark.cave-ayland@ilande.co.uk>
Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
When running the official PMON firmware for the Fuloong 2E, we see
8-bit and 16-bit accesses to PCI config space:
$ qemu-system-mips64el -M fuloong2e -bios pmon_2e.bin \
-trace -trace bonito\* -trace pci_cfg\*
pci_cfg_write vt82c686b-pm 05:4 @0x90 <- 0xeee1
bonito_spciconf_small_access PCI config address is smaller then 32-bit, addr: 0x4d2, size: 2
pci_cfg_write vt82c686b-pm 05:4 @0xd2 <- 0x1
pci_cfg_write vt82c686b-pm 05:4 @0x4 <- 0x1
pci_cfg_write vt82c686b-isa 05:0 @0x4 <- 0x7
bonito_spciconf_small_access PCI config address is smaller then 32-bit, addr: 0x81, size: 1
pci_cfg_read vt82c686b-isa 05:0 @0x81 -> 0x0
bonito_spciconf_small_access PCI config address is smaller then 32-bit, addr: 0x81, size: 1
pci_cfg_write vt82c686b-isa 05:0 @0x81 <- 0x80
bonito_spciconf_small_access PCI config address is smaller then 32-bit, addr: 0x83, size: 1
pci_cfg_write vt82c686b-isa 05:0 @0x83 <- 0x89
bonito_spciconf_small_access PCI config address is smaller then 32-bit, addr: 0x85, size: 1
pci_cfg_write vt82c686b-isa 05:0 @0x85 <- 0x3
bonito_spciconf_small_access PCI config address is smaller then 32-bit, addr: 0x5a, size: 1
pci_cfg_write vt82c686b-isa 05:0 @0x5a <- 0x7
bonito_spciconf_small_access PCI config address is smaller then 32-bit, addr: 0x85, size: 1
pci_cfg_write vt82c686b-isa 05:0 @0x85 <- 0x1
Also this is what the Linux kernel does since it supports the Bonito
north bridge:
https://elixir.bootlin.com/linux/v2.6.15/source/arch/mips/pci/ops-bonito64.c#L85
So it seems safe to assume the datasheet is incomplete or outdated
regarding the address constraints.
This problem was exposed by commit 911629e6d3
("vt82c686: Fix SMBus IO base and configuration registers").
Reported-by: BALATON Zoltan <balaton@eik.bme.hu>
Suggested-by: Jiaxun Yang <jiaxun.yang@flygoat.com>
Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Message-Id: <20210624202747.1433023-4-f4bug@amsat.org>
Tested-by: BALATON Zoltan <balaton@eik.bme.hu>
qemu has 2 type of functions: shutdown and reboot. Shutdown
function has to be used for machine shutdown. Otherwise we cause
a reset with a bogus "cause" value, when we intended a shutdown.
Signed-off-by: Maxim Uvarov <maxim.uvarov@linaro.org>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Message-id: 20210625111842.3790-3-maxim.uvarov@linaro.org
[PMM: tweaked commit message]
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
This is just enough to make reboot and poweroff work. Works for
linux, u-boot, and the arm trusted firmware. Not tested, but should
work for plan9, and bare-metal/hobby OSes, since they seem to generally
do what linux does for reset.
The watchdog timer functionality is not yet implemented.
Resolves: https://gitlab.com/qemu-project/qemu/-/issues/64
Signed-off-by: Nolan Leake <nolan@sigbus.net>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Tested-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Message-id: 20210625210209.1870217-1-nolan@sigbus.net
[PMM: tweaked commit title; fixed region size to 0x200;
moved header file to include/]
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Per the datasheet section "5.7.5. Accessing PCI configuration space"
the address must be 32-bit aligned. Trace eventual accesses not
aligned to 32-bit.
Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Message-Id: <20210624202747.1433023-3-f4bug@amsat.org>
* namespace eui64 support (Heinrich)
* aiocb refactoring (Klaus)
* controller parameter for auto zone transitioning (Niklas)
* misc fixes and additions (Gollu, Klaus, Keith)
-----BEGIN PGP SIGNATURE-----
iQEzBAABCAAdFiEEUigzqnXi3OaiR2bATeGvMW1PDekFAmDbap8ACgkQTeGvMW1P
Denz9wf9GtU4z7G0pQpFlv1smWPvQfv9qlkGiRvGcIQjEgPjcKjEsJC1CqtG6nZ5
BGYzey706iM7NAs6wPkyUyHgWXl+N/Ku5nNBvNJuzTN5J9aHgnqehe8civvS6ONU
0WtAQEEZCLu0Qbvw6KawCShXrJ6Jpmu+bYGggYEy5+baumLF0Qj50l2wRiDbImNu
rE3iZuhEenwnNNSTTkyt2RT8lSzizAtth4bAqzl3Zw1Q3NO+qDCL0wPOWD7YuD8p
LTZ8/ojB1+YUI3JrMM4MlzbJyGstdk2Y5zq6QpAcf86agaaFEmS0iqjOic52ImpL
VzmZZZ0W7kmhJVc5H/Q5y/KAFIHnFA==
=efjI
-----END PGP SIGNATURE-----
Merge remote-tracking branch 'remotes/nvme/tags/nvme-next-pull-request' into staging
hw/nvme patches
* namespace eui64 support (Heinrich)
* aiocb refactoring (Klaus)
* controller parameter for auto zone transitioning (Niklas)
* misc fixes and additions (Gollu, Klaus, Keith)
# gpg: Signature made Tue 29 Jun 2021 19:46:55 BST
# gpg: using RSA key 522833AA75E2DCE6A24766C04DE1AF316D4F0DE9
# gpg: Good signature from "Klaus Jensen <its@irrelevant.dk>" [unknown]
# gpg: aka "Klaus Jensen <k.jensen@samsung.com>" [unknown]
# gpg: WARNING: This key is not certified with a trusted signature!
# gpg: There is no indication that the signature belongs to the owner.
# Primary key fingerprint: DDCA 4D9C 9EF9 31CC 3468 4272 63D5 6FC5 E55D A838
# Subkey fingerprint: 5228 33AA 75E2 DCE6 A247 66C0 4DE1 AF31 6D4F 0DE9
* remotes/nvme/tags/nvme-next-pull-request: (23 commits)
hw/nvme: add 'zoned.zasl' to documentation
hw/nvme: fix pin-based interrupt behavior (again)
hw/nvme: fix missing check for PMR capability
hw/nvme: documentation fix
hw/nvme: fix endianess conversion and add controller list
Partially revert "hw/block/nvme: drain namespaces on sq deletion"
hw/nvme: reimplement format nvm to allow cancellation
hw/nvme: reimplement zone reset to allow cancellation
hw/nvme: reimplement the copy command to allow aio cancellation
hw/nvme: add dw0/1 to the req completion trace event
hw/nvme: use prinfo directly in nvme_check_prinfo and nvme_dif_check
hw/nvme: remove assert from nvme_get_zone_by_slba
hw/nvme: save reftag when generating pi
hw/nvme: reimplement dsm to allow cancellation
hw/nvme: add nvme_block_status_all helper
hw/nvme: reimplement flush to allow cancellation
hw/nvme: default for namespace EUI-64
hw/nvme: namespace parameter for EUI-64
hw/nvme: fix csi field for cns 0x00 and 0x11
hw/nvme: add param to control auto zone transitioning to zone state closed
...
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Commit dabefdd6 removed code that was supposed to try reconnecting
during .realize(), but actually just crashed and had several design
problems.
This adds the feature back without the crash in simple cases while also
fixing some design problems: Reconnection is now only tried if there was
a problem with the connection and not an error related to the content
(which would fail again the same way in the next attempt). Reconnection
is limited to three attempts (four with the initial attempt) so that we
won't end up in an infinite loop if a problem is permanent. If the
backend restarts three times in the very short time window of device
initialisation, we have bigger problems and erroring out is the right
course of action.
In the case that a connection error occurs and we reconnect, the error
message is printed using error_report_err(), but otherwise ignored.
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Message-Id: <20210609154658.350308-8-kwolf@redhat.com>
Reviewed-by: Raphael Norwitz <raphael.norwitz@nutanix.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
This function is the part that we will want to retry if the connection
is lost during initialisation, so factor it out to keep the following
patch simpler.
The error path for vhost_dev_get_config() forgot disconnecting the
chardev, add this while touching the code.
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Message-Id: <20210609154658.350308-7-kwolf@redhat.com>
Reviewed-by: Stefano Garzarella <sgarzare@redhat.com>
Reviewed-by: Raphael Norwitz <raphael.norwitz@nutanix.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Instead of just returning 0/-1 and letting the caller make up a
meaningless error message, add an Error parameter to allow reporting the
real error and switch to 0/-errno so that different kind of errors can
be distinguished in the caller.
config_len in vhost_user_get_config() is defined by the device, so if
it's larger than VHOST_USER_MAX_CONFIG_SIZE, this is a programming
error. Turn the corresponding check into an assertion.
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Message-Id: <20210609154658.350308-6-kwolf@redhat.com>
Reviewed-by: Stefano Garzarella <sgarzare@redhat.com>
Reviewed-by: Raphael Norwitz <raphael.norwitz@nutanix.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Instead of letting the caller make up a meaningless error message, add
an Error parameter to allow reporting the real error.
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Message-Id: <20210609154658.350308-5-kwolf@redhat.com>
Reviewed-by: Stefano Garzarella <sgarzare@redhat.com>
Reviewed-by: Raphael Norwitz <raphael.norwitz@nutanix.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Instead of just returning 0/-1 and letting the caller make up a
meaningless error message, switch to 0/-errno so that different kinds of
errors can be distinguished in the caller.
This involves changing a few more callbacks in VhostOps to return
0/-errno: .vhost_set_owner(), .vhost_get_features() and
.vhost_virtqueue_set_busyloop_timeout(). The implementations of these
functions are trivial as they generally just send a message to the
backend.
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Message-Id: <20210609154658.350308-4-kwolf@redhat.com>
Reviewed-by: Stefano Garzarella <sgarzare@redhat.com>
Reviewed-by: Raphael Norwitz <raphael.norwitz@nutanix.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Instead of just returning 0/-1 and letting the caller make up a
meaningless error message, add an Error parameter to allow reporting the
real error and switch to 0/-errno so that different kind of errors can
be distinguished in the caller.
Specifically, in vhost-user, EPROTO is used for all errors that relate
to the connection itself, whereas other error codes are used for errors
relating to the content of the connection. This will allow us later to
automatically reconnect when the connection goes away, without ending up
in an endless loop if it's a permanent error in the configuration.
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Message-Id: <20210609154658.350308-3-kwolf@redhat.com>
Reviewed-by: Stefano Garzarella <sgarzare@redhat.com>
Reviewed-by: Raphael Norwitz <raphael.norwitz@nutanix.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>