Currently the path handling hash page table translation in get_segment()
has a mix of common and 32 or 64 bit specific code. However the
division is not done terribly well which results in a lot of messy code
flipping between common and divided paths.
This patch improves the organization, consolidating several divided paths
into one. This in turn allows simplification of some code in
get_segment(), removing a number of ugly interim variables.
This new factorization will also make it easier to add support for the 1T
segments added in newer CPUs.
Signed-off-by: David Gibson <dwg@au1.ibm.com>
Signed-off-by: Alexander Graf <agraf@suse.de>
Currently, get_segment() has a variable called hash. However it doesn't
(quite) get the hash value for the ppc hashed page table. Instead it
gets the hash shifted - effectively the offset of the hash bucket within
the hash page table.
As well, as being different to the normal use of plain "hash" in the
architecture documentation, this usage necessitates some awkward 32/64
dependent masks and shifts which clutter up the path in get_segment().
This patch alters the code to use raw hash values through get_segment()
including storing raw hashes instead of pte group offsets in the ctx
structure. This cleans up the path noticeably.
This does necessitate 32/64 dependent shifts when the hash values are
taken out of the ctx structure and used, but those paths already have
32/64 bit variants so this is less awkward than it was in get_segment().
Signed-off-by: David Gibson <dwg@au1.ibm.com>
Signed-off-by: Alexander Graf <agraf@suse.de>
On ppc machines with hash table MMUs, the special purpose register SDR1
contains both the base address of the encoded size (hashed) page tables.
At present, we interpret the SDR1 value within the address translation
path. But because the encodings of the size for 32-bit and 64-bit are
different this makes for a confusing branch on the MMU type with a bunch
of curly shifts and masks in the middle of the translate path.
This patch cleans things up by moving the interpretation on SDR1 into the
helper function handling the write to the register. This leaves a simple
pre-sanitized base address and mask for the hash table in the CPUState
structure which is easier to work with in the translation path.
This makes the translation path more readable. It addresses the FIXME
comment currently in the mtsdr1 helper, by validating the SDR1 value during
interpretation. Finally it opens the way for emulating a pSeries-style
partition where the hash table used for translation is not mapped into
the guests's RAM.
Signed-off-by: David Gibson <dwg@au1.ibm.com>
Signed-off-by: Alexander Graf <agraf@suse.de>
The slb_lookup() function, used in the ppc translation path returns a
number of slb entry fields in reference parameters. However, only one
of the two callers of slb_lookup() actually wants this information.
This patch, therefore, makes slb_lookup() return a simple pointer to the
located SLB entry (or NULL), and the caller which needs the fields can
extract them itself.
Signed-off-by: David Gibson <dwg@au1.ibm.com>
Signed-off-by: Alexander Graf <agraf@suse.de>
qemu already includes support for the popcntb instruction introduced
in POWER5 (although it doesn't actually allow you to choose POWER5).
However, the logic is slightly incorrect: it will generate results
truncated to 32-bits when the CPU is in 32-bit mode. This is not
normal for powerpc - generally arithmetic instructions on a 64-bit
powerpc cpu will generate full 64 bit results, it's just that only the
low 32 bits will be significant for condition codes.
This patch corrects this nit, which actually simplifies the code slightly.
In addition, this patch implements the popcntw and popcntd
instructions added in POWER7, in preparation for allowing POWER7 as an
emulated CPU.
Signed-off-by: David Gibson <dwg@au1.ibm.com>
Signed-off-by: Alexander Graf <agraf@suse.de>
The PURR (Processor Utilization Resource Register) is a register found
on recent POWER CPUs. The guts of implementing it at least enough to
get by are already present in qemu, however some of the helper
functions needed to actually wire it up are missing.
This patch adds the necessary glue, so that the PURR can be wired up
when we implement newer POWER CPU targets which include it.
Signed-off-by: David Gibson <dwg@au1.ibm.com>
Signed-off-by: Alexander Graf <agraf@suse.de>
For a 64-bit PowerPC target, qemu correctly implements translation
through the segment lookaside buffer. Likewise it supports the
slbmte instruction which is used to load entries into the SLB.
However, it does not emulate the slbmfee and slbmfev instructions
which read SLB entries back into registers. Because these are
only occasionally used in guests (mostly for debugging) we get
away with it.
However, given the recent SLB cleanups, it becomes quite easy to
implement these, and thereby allow, amongst other things, a guest
Linux to use xmon's command to dump the SLB.
Signed-off-by: David Gibson <dwg@au1.ibm.com>
Signed-off-by: Alexander Graf <agraf@suse.de>
PowerPC and POWER chips since the POWER4 and 970 have a special
hypervisor mode, and a corresponding form of the system call
instruction which traps to the hypervisor.
qemu currently has stub implementations of hypervisor mode. That
is, the outline is there to allow qemu to run a PowerPC hypervisor
under emulation. There are a number of details missing so this
won't actually work at present, but the idea is there.
What there is no provision at all, is for qemu to instead emulate
the hypervisor itself. That is to have hypercalls trap into qemu
and their result be emulated from qemu, rather than running
hypervisor code within the emulated system.
Hypervisor hardware aware KVM implementations are in the works and
it would be useful for debugging and development to also allow
full emulation of the same para-virtualized guests as such a KVM.
Therefore, this patch adds a hook which will allow a machine to
set up emulation of hypervisor calls.
Signed-off-by: David Gibson <dwg@au1.ibm.com>
Signed-off-by: Alexander Graf <agraf@suse.de>
Currently the SLB information when emulating a PowerPC 970 is
storeed in a structure with the unhelpfully named fields 'tmp'
and 'tmp64'. While the layout in these fields does match the
description of the SLB in the architecture document, it is not
convenient either for looking up the SLB, or for emulating the
slbmte instruction.
This patch, therefore, reorganizes the SLB entry structure to be
divided in the the "ESID related" and "VSID related" fields as
they are divided in instructions accessing the SLB.
In addition to making the code smaller and more readable, this will
make it easier to implement for the 1TB segments used in more
recent PowerPC chips.
Signed-off-by: David Gibson <dwg@au1.ibm.com>
Signed-off-by: Alexander Graf <agraf@suse.de>
This was done with:
sed -i 's/qemu_get_clock\>/qemu_get_clock_ns/' \
$(git grep -l 'qemu_get_clock\>' )
sed -i 's/qemu_new_timer\>/qemu_new_timer_ns/' \
$(git grep -l 'qemu_new_timer\>' )
after checking that get_clock and new_timer never occur twice
on the same line. There were no missed occurrences; however, even
if there had been, they would have been caught by the compiler.
There was exactly one false positive in qemu_run_timers:
- current_time = qemu_get_clock (clock);
+ current_time = qemu_get_clock_ns (clock);
which is of course not in this patch.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Make the return code of kvm_arch_handle_exit directly usable for
kvm_cpu_exec. This is straightforward for x86 and ppc, just s390
would require more work. Avoid this for now by pushing the return code
translation logic into s390's kvm_arch_handle_exit.
Signed-off-by: Jan Kiszka <jan.kiszka@siemens.com>
CC: Alexander Graf <agraf@suse.de>
Signed-off-by: Marcelo Tosatti <mtosatti@redhat.com>
We will broaden the scope of this function on x86 beyond irqchip events.
Signed-off-by: Jan Kiszka <jan.kiszka@siemens.com>
Signed-off-by: Marcelo Tosatti <mtosatti@redhat.com>
Commit 7a39fe5882 failed to convert the right arch function.
Signed-off-by: Jan Kiszka <jan.kiszka@siemens.com>
Signed-off-by: Marcelo Tosatti <mtosatti@redhat.com>
All implementations are now the same, and there is only one caller,
so inline the function there.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
We do not check them, and the only arch with non-empty implementations
always returns 0 (this is also true for qemu-kvm).
Signed-off-by: Jan Kiszka <jan.kiszka@siemens.com>
CC: Alexander Graf <agraf@suse.de>
Signed-off-by: Marcelo Tosatti <mtosatti@redhat.com>
Provide arch-independent kvm_on_sigbus* stubs to remove the #ifdef'ery
from cpus.c. This patch also fixes --disable-kvm build by providing the
missing kvm_on_sigbus_vcpu kvm-stub.
Signed-off-by: Jan Kiszka <jan.kiszka@siemens.com>
Reviewed-by: Paolo Bonzini <pbonzini@redhat.com>
Acked-by: Alexander Graf <agraf@suse.de>
Signed-off-by: Marcelo Tosatti <mtosatti@redhat.com>
Instead of splattering the code with #ifdefs and runtime checks for
capabilities we cannot work without anyway, provide central test
infrastructure for verifying their availability both at build and
runtime.
Signed-off-by: Jan Kiszka <jan.kiszka@siemens.com>
Signed-off-by: Marcelo Tosatti <mtosatti@redhat.com>
Ensure that we stop the guest whenever we face a fatal or unknown exit
reason. If we stop, we also have to enforce a cpu loop exit.
Signed-off-by: Jan Kiszka <jan.kiszka@siemens.com>
Signed-off-by: Marcelo Tosatti <mtosatti@redhat.com>
Some tests in FPU emulation code were wrongly using float64_is_nan()
before commit 185698715d, and wrongly
using float64_is_quiet_nan() after. Fix them by using float64_is_any_nan()
instead.
Reviewed-by: Nathan Froyd <froydnj@codesourcery.com>
Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
The current FPU code returns 0.0 if one of the operand is a
signaling NaN and the VXSNAN exception is disabled.
fload_invalid_op_excp() doesn't return a qNaN in case of a VXSNAN
exception as the operand should be propagated instead of a new
qNaN to be generated. Fix that by calling fload_invalid_op_excp()
only for the exception generation (if enabled), and use the softfloat
code to correctly compute the result.
Reviewed-by: Nathan Froyd <froydnj@codesourcery.com>
Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
Use the new function float32_is_any_nan() instead of
float32_is_quiet_nan() || float32_is_signaling_nan().
Acked-by: Alexander Graf <agraf@suse.de>
Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
The PRECISE_EMULATION is "hardcoded" to one in target-ppc/exec.h and not
something easily tunable. Remove it and non-precise emulation code as
it doesn't make a noticeable difference in speed. People wanting speed
improvement should use softfloat-native instead.
Acked-by: Alexander Graf <agraf@suse.de>
Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
The softfloat functions float*_is_nan() were badly misnamed,
because they return true only for quiet NaNs, not for all NaNs.
Rename them to float*_is_quiet_nan() to more accurately reflect
what they do.
This change was produced by:
perl -p -i -e 's/_is_nan/_is_quiet_nan/g' $(git grep -l is_nan)
(with the results manually checked.)
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Nathan Froyd <froydnj@codesourcery.com>
Acked-by: Edgar E. Iglesias <edgar.iglesias@gmail.com>
Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
I get a warning on a signed comparison with an unsigned variable, so
let's make the variable signed and be happy.
Signed-off-by: Alexander Graf <agraf@suse.de>
Signed-off-by: Edgar E. Iglesias <edgar@axis.com>
fprintf_function uses format checking with GCC_FMT_ATTR.
Format errors were fixed in
* target-i386/helper.c
* target-mips/translate.c
* target-ppc/translate.c
Cc: Blue Swirl <blauwirbel@gmail.com>
Signed-off-by: Stefan Weil <weil@mail.berlios.de>
Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
Compiling with GCC 4.6.0 20100925 produced warnings:
/src/qemu/target-ppc/op_helper.c: In function 'helper_icbi':
/src/qemu/target-ppc/op_helper.c:351:14: error: variable 'tmp' set but not used [-Werror=unused-but-set-variable]
/src/qemu/target-ppc/op_helper.c: In function 'do_6xx_tlb':
/src/qemu/target-ppc/op_helper.c:3805:28: error: variable 'EPN' set but not used [-Werror=unused-but-set-variable]
/src/qemu/target-ppc/op_helper.c: In function 'do_74xx_tlb':
/src/qemu/target-ppc/op_helper.c:3838:28: error: variable 'EPN' set but not used [-Werror=unused-but-set-variable]
Fix by adding a dummy cast so that the variable is not unused. Delete tmp.
Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
Only Mac-on-Linux stuff used video.x, OpenBIOS does not need it.
Remove video.x MoL hacks.
Signed-off-by: Alexander Graf <agraf@suse.de>
Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
* Fix swapped reading of tlblo/hi.
* Fix tlb exec permissions
Signed-off-by: John Clark <clarkjc@runbox.com>
Signed-off-by: Alexander Graf <agraf@suse.de>
Signed-off-by: Edgar E. Iglesias <edgar.iglesias@gmail.com>
Add a powerpc 440x5 with the model ID on the Xilinx virtex5.
Connect the 440x5 to the 40x interrupt logic.
Signed-off-by: Edgar E. Iglesias <edgar.iglesias@gmail.com>
Signed-off-by: Alexander Graf <agraf@suse.de>
The hack added by c5b76b3810 was not
enough to avoid warnings with gcc flag -Wtype-limits. Add a new macro
to fix both problems.
Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
According to the Book3S spec, the interrupt context starts with an MSR
value that is rather simple. If we leave out the HV case, it's almost
always 0.
To reflect this, let's redesign the way that MSR value gets calculated.
Using this, we also squash the bug where MSR_POW can slip through into
the interrupt handler MSR.
Reported-by: Thomas Monjalon <thomas.monjalon@openwide.fr>
Signed-off-by: Alexander Graf <agraf@suse.de>
Signed-off-by: Edgar E. Iglesias <edgar.iglesias@gmail.com>
The lwarx and ldarx instructions have a bit to give some hint to the
CPU which is safe to ignore. We currently refuse to accept any instruction
with that bit set, as it used to be declared MBZ.
Let's remove the reserved bit and make the instruction work as expected.
This fixes Linux boot for ppc64.
Signed-off-by: Alexander Graf <agraf@suse.de>
Reviewed-by: Andreas Färber <andreas.faerber@web.de>
Signed-off-by: Edgar E. Iglesias <edgar.iglesias@gmail.com>
KVM on PowerPC used to have completely broken interrupt logic. Usually,
interrupts work by having a PIC that pulls a line up/down, so the CPU knows
that an interrupt is active. This line stays active until some action is
done to the PIC to release the line.
On KVM for PPC, we just checked if there was an interrupt pending and pulled
a line in the kernel module. We never released it though, hoping that kernel
space would just declare an interrupt as released when injected - which is
wrong.
To fix this, we need to completely redesign the interrupt injection logic.
Whenever an interrupt line gets triggered, we need to notify kernel space
that the line is up. Whenever it gets released, we do the same. This way
we can assure that the interrupt state is always known to kernel space.
This fixes random stalls in KVM guests on PowerPC that were waiting for
an interrupt while everyone else thought they received it already.
Signed-off-by: Alexander Graf <agraf@suse.de>
On KVM for PPC we need to tell the guest which instructions to use when
doing a hypercall. The clean way to do this is to go through an ioctl
from userspace and passing it on to the guest using the device tree.
So let's do the qemu part here: read out the hypercall and pass it on
to the guest's fw_cfg so openBIOS can read it out and expose it again.
Signed-off-by: Alexander Graf <agraf@suse.de>
Some hosts (amd64, ia64) have an ABI that ignores the high bits
of the 64-bit register when passing 32-bit arguments. Others
require the value to be properly sign-extended for the type.
I.e. "int32_t" must be sign-extended and "uint32_t" must be
zero-extended to 64-bits.
To effect this, extend the "sizemask" parameter to tcg_gen_callN
to include the signedness of the type of each parameter. If the
tcg target requires it, extend each 32-bit argument into a 64-bit
temp and pass that to the function call.
This ABI feature is required by sparc64, ppc64 and s390x.
Signed-off-by: Richard Henderson <rth@twiddle.net>
Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
This line was a bit clear.
The next lines set or reset this bit (LE) depending of another bit (ILE).
So the first line is useless.
Signed-off-by: Thomas Monjalon <thomas@monjalon.net>
Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
Since commit 2ada0ed, "Return From Interrupt" is broken for PPC processors
because some interrupt specifics bits of SRR1 are copied to MSR.
SRR1 is a save of MSR during interrupt.
During RFI, MSR must be restored from SRR1.
But some bits of SRR1 are interrupt-specific and are not used for MSR saving.
This is the specification (ISA 2.06) at chapter 6.4.3 (Interrupt Processing):
"2. Bits 33:36 and 42:47 of SRR1 or HSRR1 are loaded with information specific
to the interrupt type.
3. Bits 0:32, 37:41, and 48:63 of SRR1 or HSRR1 are loaded with a copy of the
corresponding bits of the MSR."
Below is a representation of MSR bits which are not saved:
0:15 16:31 32 33:36 37:41 42:47 48:63
——— | ——— | — X X X X — — — — — X X X X X X | ————
0000 0000 | 7 | 8 | 3 | F | 0000
History:
In the initial Qemu implementation (e1833e1), the mask 0x783F0000 was used for
saving MSR in SRR1. But all the bits 32:47 were cleared during RFI restoring.
This was wrong. The commit 2ada0ed explains that this breaks Altivec.
Indeed, bit 38 (for Altivec support) must be saved and restored.
The change of 2ada0ed was to restore all the bits of SRR1 to MSR.
But it's also wrong.
Explanation:
As an example, let's see what's happening after a TLB miss.
According to the e300 manual (E300CORERM table 5-6), the TLB miss interrupts
set the bits 44-47 for KEY, I/D, WAY and S/L. These bits are specifics to the
interrupt and must not be copied into MSR at the end of the interrupt.
With the current implementation, a TLB miss overwrite bits POW, TGPR and ILE.
Fix:
It shouldn't be needed to filter-out bits on MSR saving when interrupt occurs.
Specific bits overwrite MSR ones in SRR1.
But at the end of interrupt (RFI), specifics bits must be cleared before
restoring MSR from SRR1. The mask 0x783F0000 apply here.
Discussion:
The bits of the mask 0x783F0000 are cleared after an interrupt.
I cannot find a specification which talks about this
but I assume it is the truth since Linux can run this way.
Maybe it's not perfect but it's better (works for e300).
Signed-off-by: Thomas Monjalon <thomas@monjalon.net>
Acked-by: Alexander Graf <agraf@suse.de>
Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
When running with --enable-io-thread the timer we have doesn't help,
because it doesn't wake up the CPU thread. So instead we need to
actually kick it.
While at it I refined the logic a bit to not dumbly trigger a timer
every 500ms, but rather do it more often after an interrupt got injected.
If there's no level based interrupt to be expected, we don't need the
timer anyways.
This makes qemu-system-ppc with --enable-io-thread work when using KVM.
Signed-off-by: Alexander Graf <agraf@suse.de>
Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
Continue vcpu execution in case emulation failure happened while vcpu
was in userspace. In this case #UD will be injected into the guest
allowing guest OS to kill offending process and continue.
Signed-off-by: Gleb Natapov <gleb@redhat.com>
Signed-off-by: Marcelo Tosatti <mtosatti@redhat.com>
Time base SPRs TBL/TBU should be accessible in user/priv modes for reading
as specified in POWER ISA documentation. Therefore SPRs permissions were
changed in gen_tbl function.
Signed-off-by: Dmitry Ilyevsky <ilyevsky@gmail.com>
Acked-by: Alexander Graf <agraf@suse.de>
Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
QEMU uses a fixed page size for the CPU TLB. If the guest uses large
pages then we effectively split these into multiple smaller pages, and
populate the corresponding TLB entries on demand.
When the guest invalidates the TLB by virtual address we must invalidate
all entries covered by the large page. However the address used to
invalidate the entry may not be present in the QEMU TLB, so we do not
know which regions to clear.
Implementing a full vaiable size TLB is hard and slow, so just keep a
simple address/mask pair to record which addresses may have been mapped by
large pages. If the guest invalidates this region then flush the
whole TLB.
Signed-off-by: Paul Brook <paul@codesourcery.com>
Removes a set of ifdefs from exec.c.
Introduce TARGET_VIRT_ADDR_SPACE_BITS for all targets other
than Alpha. This will be used for page_find_alloc, which is
supposed to be using virtual addresses in the first place.
Signed-off-by: Richard Henderson <rth@twiddle.net>
This grand cleanup drops all reset and vmsave/load related
synchronization points in favor of four(!) generic hooks:
- cpu_synchronize_all_states in qemu_savevm_state_complete
(initial sync from kernel before vmsave)
- cpu_synchronize_all_post_init in qemu_loadvm_state
(writeback after vmload)
- cpu_synchronize_all_post_init in main after machine init
- cpu_synchronize_all_post_reset in qemu_system_reset
(writeback after system reset)
These writeback points + the existing one of VCPU exec after
cpu_synchronize_state map on three levels of writeback:
- KVM_PUT_RUNTIME_STATE (during runtime, other VCPUs continue to run)
- KVM_PUT_RESET_STATE (on synchronous system reset, all VCPUs stopped)
- KVM_PUT_FULL_STATE (on init or vmload, all VCPUs stopped as well)
This level is passed to the arch-specific VCPU state writing function
that will decide which concrete substates need to be written. That way,
no writer of load, save or reset functions that interact with in-kernel
KVM states will ever have to worry about synchronization again. That
also means that a lot of reasons for races, segfaults and deadlocks are
eliminated.
cpu_synchronize_state remains untouched, just as Anthony suggested. We
continue to need it before reading or writing of VCPU states that are
also tracked by in-kernel KVM subsystems.
Consequently, this patch removes many cpu_synchronize_state calls that
are now redundant, just like remaining explicit register syncs.
Signed-off-by: Jan Kiszka <jan.kiszka@siemens.com>
Signed-off-by: Marcelo Tosatti <mtosatti@redhat.com>
Invalid opcode messages can be perfectly normal, for example if this
code is never executed. Don't print an error message on the console,
but keep the message in the log for debugging purposes.
Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
The shifts in the gen_evsplat* functions were expecting rA to be masked,
not extracted, and so used the wrong shift amounts to sign-extend or pad
with zeroes.
Signed-off-by: Nathan Froyd <froydnj@codesourcery.com>
Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
The CRF_{CH,CL,CH_OR_CL,CH_AND_CL} constants were all off by one bit
position. Because of this, the SPE evcmp* family of instructions would
store values in the result condition register that were also off by one
bit position.
Fixed by using the CRF_{LT,GT,EQ,SO} constants for the shift amounts.
Signed-off-by: Nathan Froyd <froydnj@codesourcery.com>
Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
For some odd reason we sometimes hang inside KVM forever. I'd guess it's
a race condition where we actually have a level triggered interrupt, but
the infrastructure can't expose that yet, so the guest ACKs it, goes to
sleep and never gets notified that there's still an interrupt pending.
As a quick workaround, let's just wake up every 500 ms. That way we can
assure that we're always reinjecting interrupts in time.
Signed-off-by: Alexander Graf <agraf@suse.de>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
We were masking 1TB SLB entries on the feature bit of 16 MB pages. Obviously
that breaks, so let's just ignore 1TB SLB entries for now and instead do
16MB pages correctly.
This fixes PPC64 Linux boot with -m above 256.
Signed-off-by: Alexander Graf <agraf@suse.de>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Our guest systems need to know by how much the timebase increases every second,
so there usually is a "timebase-frequency" property in the cpu leaf of the
device tree.
This property is missing in OpenBIOS.
With qemu, Linux's fallback timebase speed and qemu's internal timebase speed
match up. With KVM, that is no longer true. The guest is running at the same
timebase speed as the host.
This leads to massive timing problems. On my test machine, a "sleep 2" takes
about 14 seconds with KVM enabled.
This patch exports the timebase frequency to OpenBIOS, so it can then put them
into the device tree.
Signed-off-by: Alexander Graf <agraf@suse.de>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
The recent transition to always have the DCR helper functions take 32 bit
values broke the PPC64 target, as target_long became 64 bits there.
This patch changes DCR helpers to target_long arguments, and cast the values
to 32 bit when needed.
Fixes PPC64 build with --enable-debug-tcg
Based on a patch from Alexander Graf <agraf@suse.de>
Reported-by: Stefan Weil <weil@mail.berlios.de>
Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
For what I know DCR is always 32 bits wide, so we should also use uint32_t to
pass it along the stacks.
This fixes a warning when compiling qemu-system-ppc64 with KVM enabled, making
it compile without --disable-werror
Signed-off-by: Alexander Graf <agraf@suse.de>
Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
Fix the alternate time base the same way as the default timebase. SPR_ATBL
should return a 64-bit value on 64 bit implementations.
Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
On PPC we have a 64-bit time base. Usually (PPC32) this is accessed using
two separate 32 bit SPR accesses to SPR_TBU and SPR_TBL.
On PPC64 the SPR_TBL register acts as 64 bit though, so we get the full
64 bits as return value. If we only take the lower ones, fine. But Linux
wants to see all 64 bits or it breaks.
This patch makes PPC64 Linux work even after TB crossed the 32-bit boundary,
which usually happened a few seconds after bootup.
Signed-off-by: Alexander Graf <agraf@suse.de>
Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
My segment sync patch broke compilation on PPC32, because it was trying to
sync the SLB even though ppc32 CPUs don't have an SLB.
So let's only sync it when we're on a PP64 one!
Signed-off-by: Alexander Graf <agraf@suse.de>
Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
While x86 only needs to sync cr0-4 to know all about its MMU state and enable
qemu to resolve virtual to physical addresses, we need to sync all of the
segment registers on PPC to know which mapping we're in.
So let's grab the segment register contents to be able to use the "x" monitor
command and also enable the gdbstub to resolve virtual addresses.
Signed-off-by: Alexander Graf <agraf@suse.de>
Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
No need to alias e300 core for each CPU package.
Differences between microcontrollers have to be implemented in a higher layer
than translate_init.c
Signed-off-by: Thomas Monjalon <thomas@monjalon.net>
Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
Add CPU declarations of MPC8343, MPC8343E, MPC8347 and MPC8347E.
Signed-off-by: Thomas Monjalon <thomas@monjalon.net>
Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
Declare HID2 register.
Use high BATs for e300 (8 instead of 4).
Fix index of high BATs registers.
Before the fix, IBAT4-7 were overwriting IBAT0-3.
Signed-off-by: François Armand <francois.armand@os4i.com>
Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
In the very least, a change like this requires discussion on the list.
The naming convention is goofy and it causes a massive merge problem. Something
like this _must_ be presented on the list first so people can provide input
and cope with it.
This reverts commit 99a0949b72.
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
