Tidy up win32 main loop bits, allow timeout >= 1s, and force timeout to 0 if
there is a pending bottom half.
git-svn-id: svn://svn.savannah.nongnu.org/qemu/trunk@5577 c046a42c-6fe2-441c-8c8c-71466251a162
This patch makes qemu keep track of the character devices in use and
implements a "info chardev" monitor command to print a list.
qemu_chr_open() sticks the devices into a linked list now. It got a new
argument (label), so there is a name for each device. It also assigns a
filename to each character device. By default it just copyes the
filename passed in. Individual drivers can fill in something else
though. qemu_chr_open_pty() sets the filename to name of the pseudo tty
allocated.
Output looks like this:
(qemu) info chardev
monitor: filename=unix:/tmp/run.sh-26827/monitor,server,nowait
serial0: filename=unix:/tmp/run.sh-26827/console,server
serial1: filename=pty:/dev/pts/5
parallel0: filename=vc:640x480
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
git-svn-id: svn://svn.savannah.nongnu.org/qemu/trunk@5575 c046a42c-6fe2-441c-8c8c-71466251a162
The current DMA routines are driven by a call in main_loop_wait() after every
select.
This patch converts the DMA code to be driven by a constantly rescheduled
bottom half. The advantage of using a scheduled bottom half is that we can
stop scheduling the bottom half when there no DMA channels are runnable. This
means we can potentially detect this case and sleep longer in the main loop.
The only two architectures implementing DMA_run() are cris and i386. For cris,
I converted it to a simple repeating bottom half. I've only compile tested
this as cris does not seem to work on a 64-bit host. It should be functionally
identical to the previous implementation so I expect it to work.
For x86, I've made sure to only fire the DMA bottom half if there is a DMA
channel that is runnable. The effect of this is that unless you're using sb16
or a floppy disk, the DMA bottom half never fires.
You probably should test this malc. My own benchmarks actually show slight
improvement by it's possible the change in timing could affect your demos.
Since v1, I've changed the code to use a BH instead of a timer. cris at least
seems to depend on faster than 10ms polling.
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
git-svn-id: svn://svn.savannah.nongnu.org/qemu/trunk@5573 c046a42c-6fe2-441c-8c8c-71466251a162
Bottom halves are supposed to not complete until the next iteration of the main
loop. This is very important to ensure that guests can not cause stack
overflows in the block driver code. Right now, if you attempt to schedule a
bottom half within a bottom half callback, you will enter an infinite loop.
This patch uses the same logic that we use for the IOHandler loop to make the
bottom half processing robust in list manipulation while in a callback.
This patch also introduces idle scheduling for bottom halves. qemu_bh_poll()
returns an indication of whether any bottom halves were successfully executed.
qemu_aio_wait() uses this to immediately return if a bottom half was executed
instead of waiting for a completion notification.
qemu_bh_schedule_idle() works around this by not reporting the callback has
run in the qemu_bh_poll loop. qemu_aio_wait() probably needs some refactoring
but that would require a larger code audit. idle scheduling seems like a good
compromise.
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
git-svn-id: svn://svn.savannah.nongnu.org/qemu/trunk@5572 c046a42c-6fe2-441c-8c8c-71466251a162
This patch fixes migration so that it works on Win32. This requires using
socket specific calls since sockets cannot be treated like file descriptors
on win32.
Signed-off-by: Hervé Poussineau <hpoussin@reactos.org>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
git-svn-id: svn://svn.savannah.nongnu.org/qemu/trunk@5525 c046a42c-6fe2-441c-8c8c-71466251a162
The live migration code broke the windows build. As part of this
change, I've switched the BIOS path to C:\Program Files\Qemu instead of
/c/Program Files/Qemu. The later is only valid when launching from MSYS
but the former is always valid.
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
git-svn-id: svn://svn.savannah.nongnu.org/qemu/trunk@5524 c046a42c-6fe2-441c-8c8c-71466251a162
This patch changes the cache= option to accept none, writeback, or writethough
to control the host page cache behavior. By default, writethrough caching is
now used which internally is implemented by using O_DSYNC to open the disk
images. When using -snapshot, writeback is used by default since data integrity
it not at all an issue.
cache=none has the same behavior as cache=off previously. The later syntax is
still supported by now deprecated. I also cleaned up the O_DIRECT
implementation to avoid many of the #ifdefs.
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
git-svn-id: svn://svn.savannah.nongnu.org/qemu/trunk@5485 c046a42c-6fe2-441c-8c8c-71466251a162
This patch adds an ethernet announce function that will minimize downtime
when doing a live migration. This code originates from KVM.
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
git-svn-id: svn://svn.savannah.nongnu.org/qemu/trunk@5477 c046a42c-6fe2-441c-8c8c-71466251a162
This patch introduces a command line parameter and monitor command for starting
a live migration. The next patch will provide an example of how to use these
parameters.
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
git-svn-id: svn://svn.savannah.nongnu.org/qemu/trunk@5476 c046a42c-6fe2-441c-8c8c-71466251a162
This patch allows QEMUFile's read and write operations to return
negative error codes. This is necessary to detect things like closed
streams during live migration.
It also removes unused code for QEMUFileFD write path. Finally, it
makes sure to avoid attempting to flush an output buffer if the file
is only being used for input. This was spotted by Uri Lublin.
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
git-svn-id: svn://svn.savannah.nongnu.org/qemu/trunk@5474 c046a42c-6fe2-441c-8c8c-71466251a162
Replace signalfd with signal handler/pipe. There is no way to interrupt
the CPU execution loop when a file descriptor becomes readable. This
results in a large performance regression in sparc emulation during
bootup.
This patch switches us to signal handler/pipe which was originally
suggested by Ian Jackson. The signal handler lets us interrupt the
CPU emulation loop while the write to a pipe lets us avoid the
select/signal race condition.
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
git-svn-id: svn://svn.savannah.nongnu.org/qemu/trunk@5451 c046a42c-6fe2-441c-8c8c-71466251a162
Introduce a max_cpus per-machine variable, allowing individual boards
to limit it's number of CPUs. Check requested number of CPUs in setup
code and exit if it exceeds the supported number for the machine.
This also renders the static MAX_CPUS check obsolete, so remove this
from vl.c.
Signed-off-by: Jes Sorensen <jes@sgi.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
git-svn-id: svn://svn.savannah.nongnu.org/qemu/trunk@5443 c046a42c-6fe2-441c-8c8c-71466251a162
This patch replaces the static memory savevm/loadvm handler with a "live" one.
This handler is used even if performing a non-live migration.
The key difference between this handler and the previous is that each page is
prefixed with the address of the page. The QEMUFile rate limiting code, in
combination with the live migration dirty tracking bits, is used to determine
which pages should be sent and how many should be sent.
The live save code "converges" when the number of dirty pages reaches a fixed
amount. Currently, this is 10 pages. This is something that should eventually
be derived from whatever the bandwidth limitation is.
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
git-svn-id: svn://svn.savannah.nongnu.org/qemu/trunk@5437 c046a42c-6fe2-441c-8c8c-71466251a162
The current savevm/loadvm protocol has some draw backs. It does not support
the ability to do progressive saving which means it cannot be used for live
checkpointing or migration. The sections sizes are 32-bit integers which
means that it will not function when using more than 4GB of memory for a guest.
It attempts to seek within the output file which means it cannot be streamed.
The current protocol also is pretty lax about how it supports forward
compatibility. If a saved section version is greater than what the restore
code support, the restore code generally treats the saved data as being in
whatever version it supports. This means that restoring a saved VM on an older
version of QEMU will likely result in silent guest failure.
This patch introduces a new version of the savevm protocol. It has the
following features:
* Support for progressive save of sections (for live checkpoint/migration)
* An asynchronous API for doing save
* Support for interleaving multiple progressive save sections
(for future support of memory hot-add/storage migration)
* Fully streaming format
* Strong section version checking
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
git-svn-id: svn://svn.savannah.nongnu.org/qemu/trunk@5434 c046a42c-6fe2-441c-8c8c-71466251a162
To support live migration, we override QEMUFile so that instead of writing to
disk, the save/restore state happens over a network connection.
This patch makes QEMUFile read/write operations function pointers so that we
can override them for live migration.
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
git-svn-id: svn://svn.savannah.nongnu.org/qemu/trunk@5352 c046a42c-6fe2-441c-8c8c-71466251a162
Instead of having (current)three command line switches -std-vga,
-cirrusvga and -vmwarevga, provide one -vga switch which takes
an argument, so that:
qemu -std-vga becomes qemu -vga std
qemu -cirrusvga becomes qemu -vga cirrus
qemu -vmwarevga becomes qemu -vga vmware
Update documentation accordingly.
git-svn-id: svn://svn.savannah.nongnu.org/qemu/trunk@5335 c046a42c-6fe2-441c-8c8c-71466251a162
Right now, we sprinkle #if defined(QEMU_IMG) && defined(QEMU_NBD) all over the
code. It's ugly and causes us to have to build multiple object files for
linking against qemu and the tools.
This patch introduces a new file, qemu-tool.c which contains enough for
qemu-img, qemu-nbd, and QEMU to all share the same objects.
This also required getting qemu-nbd to be a bit more Windows friendly. I also
changed the Windows block-raw to use normal IO instead of overlapping IO since
we don't actually do AIO yet on Windows. I changed the various #if 0's to
#if WIN32_AIO to make it easier for someone to eventually fix AIO on Windows.
After this patch, there are no longer any #ifdef's related to qemu-img and
qemu-nbd.
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
git-svn-id: svn://svn.savannah.nongnu.org/qemu/trunk@5226 c046a42c-6fe2-441c-8c8c-71466251a162
This patch adds support for removing USB devices by host address.
Which is usefull for things like libvirtd because there is no easy way to
find guest USB address of the host device.
In other words you can now do:
usb_add host:3.5
...
usb_del host:3.5
Before the patch 'usb_del' did not support 'host:' notation.
----
Syntax for specifying auto connect filters has been improved.
Old syntax was
host:bus.dev
host:pid:vid
New syntax is
host:auto:bus.dev[:pid:vid]
In both the cases any attribute can be set to "*".
New syntax is more flexible and lets you do things like
host:3.*:5533:* /* grab any device on bus 3 with vendor id 5533 */
It's now possible to remove auto filters. For example:
usb_del host:auto:3.*:5533:*
Active filters are printed after all host devices in 'info usb' output.
Which now looks like this:
Device 1.1, speed 480 Mb/s
Hub: USB device 1d6b:0002, EHCI Host Controller
Device 1.4, speed 480 Mb/s
Class 00: USB device 1058:0704, External HDD
Auto filters:
Device 3.* ID *:*
Signed-off-by: Max Krasnyansky <maxk@kernel.org>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
git-svn-id: svn://svn.savannah.nongnu.org/qemu/trunk@5205 c046a42c-6fe2-441c-8c8c-71466251a162
This patch introduces signalfd() to work around the signal/select race in
checking for AIO completions. For platforms that don't support signalfd(), we
emulate it with threads.
There was a long discussion about this approach. I don't believe there are any
fundamental problems with this approach and I believe eliminating the use of
signals is a good thing.
I've tested Windows and Linux using Windows and Linux guests. I've also checked
for disk IO performance regressions.
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
git-svn-id: svn://svn.savannah.nongnu.org/qemu/trunk@5187 c046a42c-6fe2-441c-8c8c-71466251a162
When CONFIG_SLIRP is not defined, we should not try to use
-net user as a default.
Patch from Jeremy Fitzhardinge <jeremy@goop.org> (who is a Citrix
staff member).
Signed-off-by: Ian Jackson <ian.jackson@eu.citrix.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
git-svn-id: svn://svn.savannah.nongnu.org/qemu/trunk@5092 c046a42c-6fe2-441c-8c8c-71466251a162
The direction bit in the control register should not be directly
set using PPWCONTROL. The kernel gives the following debug message.
parport0 (ppdev0): use data_reverse for this!
More over setting the data pins to forward mode does not work,
perhaps a bug in the Linux PP driver. The right way to do this is
to use PPDATADIR to set the direction. The patch checks if the
user is toggling the direction bit, and invokes PPDATADIR to
do the job.
Signed-off-by: Vijay Kumar B <vijaykumar@bravegnu.org>
Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
git-svn-id: svn://svn.savannah.nongnu.org/qemu/trunk@5063 c046a42c-6fe2-441c-8c8c-71466251a162
Add idle field to DisplayState struct, so drivers can figure
the display is idle and take advantage of that.
The xen framebuffer driver will use this to communicate the
idle state to the guest, so it knows it can stop doing updates
to a virtual display which is invisible anyway.
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Signed-off-by: Samuel Thibault <samuel.thibault@eu.citrix.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
git-svn-id: svn://svn.savannah.nongnu.org/qemu/trunk@5056 c046a42c-6fe2-441c-8c8c-71466251a162