The MOVE LONG instruction should pad the destination operand with the
byte from bit positions 32-39 of the source length (r2 + 1), not with
the same byte in the source address.
Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
Reviewed-by: Richard Henderson <rth@twiddle.net>
Signed-off-by: Alexander Graf <agraf@suse.de>
The PCI device MSIx table is cleaned out in hardware after EEH PE
reset. However, we still hold the stale MSIx entries in QEMU, which
should be cleared accordingly. Otherwise, we will run into another
(recursive) EEH error and the PCI devices contained in the PE have
to be offlined exceptionally.
The patch introduces function spapr_phb_vfio_eeh_pre_reset(), which
is called by sPAPR when asserting hot or fundamental reset, to clear
stale MSIx table for VFIO PCI devices before EEH PE reset so that
MSIx table could be restored properly after EEH PE reset.
Signed-off-by: Gavin Shan <gwshan@linux.vnet.ibm.com>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
Signed-off-by: Alexander Graf <agraf@suse.de>
When rebooting the guest, some PEs might be in frozen state. The
contained PCI devices won't work properly if their frozen states
aren't cleared in time. One case running into this situation would
be maximal EEH error times encountered in the guest.
The patch reenables the EEH functinality on PEs on PHB's reset
callback, which will clear their frozen states if needed.
Signed-off-by: Gavin Shan <gwshan@linux.vnet.ibm.com>
Reviewed-by: David Gibson <david@gibson.dropbear.id.au>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
Signed-off-by: Alexander Graf <agraf@suse.de>
There might have emulated PCI devices, together with VFIO PCI
devices under one PHB. The EEH capability shouldn't enabled
on emulated PCI devices.
The patch returns error when enabling EEH capability on emulated
PCI devices by RTAS call "ibm,set-eeh-option".
Signed-off-by: Gavin Shan <gwshan@linux.vnet.ibm.com>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
Signed-off-by: Alexander Graf <agraf@suse.de>
There's a call to object_dynamic_cast() in spapr_vty which uses the type
name "spapr-vty" directly, instead of the usual idiom of using the #defined
TYPE_VIO_SPAPR_VTY_DEVICE. Fix it.
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
Signed-off-by: Alexander Graf <agraf@suse.de>
If a guest passes the reg property of a valid VIO object that is not a VTY
to either H_GET_TERM_CHAR or H_PUT_TERM_CHAR, QEMU hits a dynamic cast
assertion and aborts.
PAPR+ says "Hypervisor checks the termno parameter for validity against the
Vterm IOA unit addresses assigned to the partition, else return H_Parameter."
This patch adds a type check to ensure vty_lookup() either returns a pointer
to a valid VTY object or NULL. H_GET_TERM_CHAR and H_PUT_TERM_CHAR will
now return H_PARAMETER to the guest instead of crashing.
The patch has no effect on the reg == 0 hack used to implement the RTAS call
display-character.
Signed-off-by: Greg Kurz <gkurz@linux.vnet.ibm.com>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
Signed-off-by: Alexander Graf <agraf@suse.de>
* phb_index is not being used and if required can be obtained from sphb
* use helper to get drc_index in spapr_populate_pci_child_dt()
* Check if drc_index is zero
Suggested-by: Alexey Kardashevskiy <aik@ozlabs.ru>
Signed-off-by: Nikunj A Dadhania <nikunj@linux.vnet.ibm.com>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
Signed-off-by: Alexander Graf <agraf@suse.de>
Each hardware instance has a platform unique location code. The OF
device tree that describes a part of a hardware entity must include
the “ibm,loc-code” property with a value that represents the location
code for that hardware entity.
Populate ibm,loc-code.
1) PCI passthru devices need to identify with its own ibm,loc-code
available on the host. In failure cases use:
vfio_<name>:<phb-index>:<bus>:<slot>.<fn>
2) Emulated devices encode as following:
qemu_<name>:<phb-index>:<bus>:<slot>.<fn>
Signed-off-by: Nikunj A Dadhania <nikunj@linux.vnet.ibm.com>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
Signed-off-by: Alexander Graf <agraf@suse.de>
All the PCI enumeration and device node creation was off-loaded to
SLOF. With PCI hotplug support, code needed to be added to add device
node. This creates multiple copy of the code one in SLOF and other in
hotplug code. To unify this, the patch adds the pci device node
creation in Qemu. For backward compatibility, a flag
"qemu,phb-enumerated" is added to the phb, suggesting to SLOF to not
do device node creation.
Signed-off-by: Nikunj A Dadhania <nikunj@linux.vnet.ibm.com>
[ Squashed Michael's drc_index changes ]
Signed-off-by: Michael Roth <mdroth@linux.vnet.ibm.com>
Signed-off-by: Nikunj A Dadhania <nikunj@linux.vnet.ibm.com>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
Signed-off-by: Alexander Graf <agraf@suse.de>
When supporting CPU hot removal by parking the vCPU fd and reusing
it during hotplug again, there can be cases where we try to reenable
KVM_CAP_IRQ_XICS CAP for the vCPU for which it was already enabled.
Introduce a boolean member in ICPState to track this and don't
reenable the CAP if it was already enabled earlier.
Re-enabling this CAP should ideally work, but currently it results in
kernel trying to create and associate ICP with this vCPU and that
fails since there is already an ICP associated with it. Hence this
patch is needed to work around this problem in the kernel.
This change allows CPU hot removal to work for sPAPR.
Signed-off-by: Bharata B Rao <bharata@linux.vnet.ibm.com>
Reviewed-by: David Gibson <david@gibson.dropbear.id.au>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
Signed-off-by: Alexander Graf <agraf@suse.de>
Keep cpu_model field in MachineState uptodate so that it can be used
from the CPU hotplug path.
Signed-off-by: Bharata B Rao <bharata@linux.vnet.ibm.com>
Reviewed-by: David Gibson <david@gibson.dropbear.id.au>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
Signed-off-by: Alexander Graf <agraf@suse.de>
Factor out bits of sPAPR specific CPU initialization code into
a separate routine so that it can be called from CPU hotplug
path too.
Signed-off-by: Bharata B Rao <bharata@linux.vnet.ibm.com>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
Signed-off-by: Alexander Graf <agraf@suse.de>
Reorganize CPU device tree generation code so that it be reused from
hotplug path. CPU dt entries are now generated from spapr_finalize_fdt()
instead of spapr_create_fdt_skel().
Note: This is how the split-up looks like now:
Boot path
---------
spapr_finalize_fdt
spapr_populate_cpus_dt_node
spapr_populate_cpu_dt
spapr_fixup_cpu_numa_dt
spapr_fixup_cpu_smt_dt
ibm,cas path
------------
spapr_h_cas_compose_response
spapr_fixup_cpu_dt
spapr_fixup_cpu_numa_dt
spapr_fixup_cpu_smt_dt
Signed-off-by: Bharata B Rao <bharata@linux.vnet.ibm.com>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
Signed-off-by: Alexander Graf <agraf@suse.de>
Add CPU_FOREACH_REVERSE that walks CPUs in reverse.
Needed for PowerPC CPU device tree reorganization.
Signed-off-by: Bharata B Rao <bharata@linux.vnet.ibm.com>
Reviewed-by: Andreas Färber <afaerber@suse.de>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
Signed-off-by: Alexander Graf <agraf@suse.de>
Add support for ibm,lrdr-capacity since this is needed by the guest
kernel to know about the possible hot-pluggable CPUs and Memory. With
this, pseries kernels will start reporting correct maxcpus in
/sys/devices/system/cpu/possible.
Also define the minimum hotpluggable memory size as 256MB.
Signed-off-by: Bharata B Rao <bharata@linux.vnet.ibm.com>
Reviewed-by: David Gibson <david@gibson.dropbear.id.au>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
[agraf: Fix compile error on 32bit hosts]
Signed-off-by: Alexander Graf <agraf@suse.de>
Use max_cpus instead of smp_cpus when intializating xics system. Also
report max_cpus in ibm,interrupt-server-ranges device tree property of
interrupt controller node.
Signed-off-by: Bharata B Rao <bharata@linux.vnet.ibm.com>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
Signed-off-by: Alexander Graf <agraf@suse.de>
Since we now require GLib 2.22+ (commit f40685c), we don't have to
work around lack of g_hash_table_iter_init() & friends anymore.
This reverts commit f8833a37c0.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
Signed-off-by: Alexander Graf <agraf@suse.de>
The fact that these enums have matching values is pure coincidence. We
actually need to translate from the PAPR definition to the QEMU one.
This patch doesn't fix any bug, it is only code cleanup.
Suggested-by: Alexey Kardashevskiy <aik@ozlabs.ru>
Signed-off-by: Greg Kurz <gkurz@linux.vnet.ibm.com>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
Signed-off-by: Alexander Graf <agraf@suse.de>
The tce_list variable is not a TCE but the address to a TCE: we shouldn't
clear permission bits as we do now. And this is dead code anyway since we
check tce_list is 4K aligned a few lines above.
This patch doesn't fix any bug, it is only code cleanup.
Suggested-by: Alexey Kardashevskiy <aik@ozlabs.ru>
Signed-off-by: Greg Kurz <gkurz@linux.vnet.ibm.com>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
Signed-off-by: Alexander Graf <agraf@suse.de>
Device node names should encode the unit address as hex, while the
code was encodind it as integers.
Also, use FDT_NAME_MAX macro for allocating and composing the name.
Signed-off-by: Nikunj A Dadhania <nikunj@linux.vnet.ibm.com>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
Signed-off-by: Alexander Graf <agraf@suse.de>
Current code missed the Prog IF register. All Class Code, Subclass,
and Prog IF registers are needed to identify the accurate device type.
For example: USB controllers use the PROG IF for denoting: USB
FullSpeed, HighSpeed or SuperSpeed.
Signed-off-by: Nikunj A Dadhania <nikunj@linux.vnet.ibm.com>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
Signed-off-by: Alexander Graf <agraf@suse.de>
The properties reg/assigned-resources need to encode 64-bit memory
address space as part of phys.hi dword.
00 if configuration space
01 if IO region,
10 if 32-bit MEM region
11 if 64-bit MEM region
Signed-off-by: Nikunj A Dadhania <nikunj@linux.vnet.ibm.com>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
Signed-off-by: Alexander Graf <agraf@suse.de>
Currently although we have an sPAPRMachineState descended from MachineState
we don't have an sPAPRMAchineClass descended from MachineClass. So far it
hasn't been needed, but several upcoming features are going to want it,
so this patch creates a stub implementation.
Signed-off-by: Michael Roth <mdroth@linux.vnet.ibm.com>
Signed-off-by: Bharata B Rao <bharata@linux.vnet.ibm.com>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
Signed-off-by: Alexander Graf <agraf@suse.de>
The sPAPRMachineState structure includes an entry_point field containing
the initial PC value for starting the machine, even though this always has
the value 0x100.
I think this is a hangover from very early versions which bypassed the
firmware when using -kernel. In any case it has no function now, so remove
it.
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
Signed-off-by: Alexander Graf <agraf@suse.de>
The ram_limit field was imported from sPAPREnvironment where it predates
the machine's ram size being available generically from machine->ram_size.
Worse, the existing code was inconsistent about where it got the ram size
from. Sometimes it used spapr->ram_limit, sometimes the global 'ram_size'
and sometimes a local 'ram_size' masking the global.
This cleans up the code to consistently use machine->ram_size, eliminating
spapr->ram_limit in the process.
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
Signed-off-by: Alexander Graf <agraf@suse.de>
The code for -machine pseries maintains a global sPAPREnvironment structure
which keeps track of general state information about the guest platform.
This predates the existence of the MachineState structure, but performs
basically the same function.
Now that we have the generic MachineState, fold sPAPREnvironment into
sPAPRMachineState, the pseries specific subclass of MachineState.
This is mostly a matter of search and replace, although a few places which
relied on the global spapr variable are changed to find the structure via
qdev_get_machine().
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
Signed-off-by: Alexander Graf <agraf@suse.de>
The changelog is:
> version: update to 20150429
> pci: Use QEMU created PCI device nodes
> usb: support 64-bit pci bars
> pci: Support 64-bit address translation
> pci: program correct bridge limit registers during probe
> scsi: handle report-luns failure
> Fix "key?" Forth word when using USB keyboards
> Remove bulk.fs package
> Include make.rules in the library Makefiles
Signed-off-by: Alexey Kardashevskiy <aik@ozlabs.ru>
Signed-off-by: Alexander Graf <agraf@suse.de>
XICS needs to know the upper value for cpu_index as it is used to compute
the number of servers:
smp_cpus * kvmppc_smt_threads() / smp_threads
When passing -smp cpus=1,threads=9 on a POWER8 host, we end up with:
1 * 8 / 9 = 0
... which leads to an assertion in both emulated:
Number of servers needs to be greater 0
Aborted (core dumped)
... and in-kernel XICS:
xics_kvm_realize: Assertion `icp->nr_servers' failed.
Aborted (core dumped)
With this patch, we are sure that nr_servers > 0. Passing the same bogus
-smp option then leads to:
qemu-system-ppc64: Cannot support more than 8 threads on PPC with KVM
... which is a lot more explicit than the XICS errors.
Signed-off-by: Greg Kurz <gkurz@linux.vnet.ibm.com>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
Signed-off-by: Alexander Graf <agraf@suse.de>
Current PPC code relies on -mem-path being used in order for
hugepage support to be detected. With the introduction of
MemoryBackendFile we can now handle this via:
-object memory-file-backend,mem-path=...,id=hugemem0 \
-numa node,id=mem0,memdev=hugemem0
Management tools like libvirt treat the 2 approaches as
interchangeable in some cases, which can lead to user-visible
regressions even for previously supported guest configurations.
Fix these by also iterating through any configured memory
backends that may be backed by hugepages.
Since the old code assumed hugepages always backed the entirety
of guest memory, play it safe an pick the minimum across the
max pages sizes for all backends, even ones that aren't backed
by hugepages.
Signed-off-by: Michael Roth <mdroth@linux.vnet.ibm.com>
Reviewed-by: David Gibson <david@gibson.dropbear.id.au>
Signed-off-by: Alexander Graf <agraf@suse.de>
The current macio implementation declares an interrupt that doesn't appear to
exist in the hardware or any other emulator implementation. OpenBIOS detects
this interrupt and generates an 'interrupts' property in the macio device tree
entry. Mac OS 9 halts boot when it detects this interrupt, so it has been
removed to permit further progress in the boot process.
Signed-off-by: Cormac O'Brien <i.am.cormac.obrien@gmail.com>
Reviewed-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
Signed-off-by: Alexander Graf <agraf@suse.de>
In qemu-linux-user, when calling gethostbyname2(),
it was hanging in .__res_nmkquery.
(gdb) bt
0 in .__res_nmkquery () from /lib64/libresolv.so.2
1 in .__libc_res_nquery () from /lib64/libresolv.so.2
2 in .__libc_res_nsearch () from /lib64/libresolv.so.2
3 in ._nss_dns_gethostbyname3_r () from /lib64/libnss_dns.so.2
4 in ._nss_dns_gethostbyname2_r () from /lib64/libnss_dns.so.2
5 in .gethostbyname2_r () from /lib64/libc.so.6
6 in .gethostbyname2 () from /lib64/libc.so.6
.__res_nmkquery() is:
...
do { RANDOM_BITS (randombits); } while ((randombits & 0xffff) == 0);
...
<.__res_nmkquery+112>: mftbl r11
<.__res_nmkquery+116>: clrlwi r10,r11,16
<.__res_nmkquery+120>: cmpwi cr7,r10,0
<.__res_nmkquery+124>: beq cr7,<.__res_nmkquery+112>
but as mftbl (Move From Time Base Lower) is not implemented,
r11 is always 0, so we have an infinite loop.
This patch fills the Time Base register with cpu_get_real_ticks().
Signed-off-by: Laurent Vivier <laurent@vivier.eu>
Signed-off-by: Alexander Graf <agraf@suse.de>
The TSC frequency fits comfortably in an int when expressed in kHz,
but it may overflow when converted to Hz. In this case,
tsc-frequency returns a negative value because x86_cpuid_get_tsc_freq
does a 32-bit multiplication before assigning to int64_t.
For simplicity just make tsc_khz a 64-bit value.
Spotted by Coverity.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Reviewed-by: Eduardo Habkost <ehabkost@redhat.com>
Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
ARAT signals that the APIC timer does not stop in power saving states.
As our APICs are emulated, it's fine to expose this feature to guests,
at least when asking for KVM host features or with CPU types that
include the flag. The exact model number that introduced the feature is
not known, but reports can be found that it's at least available since
Sandy Bridge.
Signed-off-by: Jan Kiszka <jan.kiszka@siemens.com>
Acked-by: Paolo Bonzini <pbonzini@redhat.com>
Acked-by: Michael S. Tsirkin <mst@redhat.com>
Reviewed-by: Eduardo Habkost <ehabkost@redhat.com>
Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
There is job resource leak in function mirror_start_job,
although bdrv_create_dirty_bitmap is unlikely failed.
Add block_job_release for each release when needed.
Signed-off-by: Ting Wang <kathy.wangting@huawei.com>
Reviewed-by: John Snow <jsnow@redhat.com>
Message-id: 1435311455-56048-1-git-send-email-kathy.wangting@huawei.com
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
In libguestfs we use /dev/fd/<NN> to pass pre-opened file descriptors
to qemu-img. Lately I've discovered that although this works, qemu
believes that these are floppy disk images. That in itself isn't much
of a problem, but now qemu prints a warning about host floppy
pass-thru being deprecated.
Extend the existing test so that it ignores /dev/fd/ as well as
/dev/fdset/
A simple test of this, if you are using the bash shell, is:
qemu-img info <( cat /dev/null )
without this patch:
$ qemu-img info <( cat /dev/null )
qemu-img: Host floppy pass-through is deprecated
Support for it will be removed in a future release.
qemu-img: Could not open '/dev/fd/63': Could not refresh total sector count: Illegal seek
with this patch:
$ qemu-img info <( cat /dev/null )
qemu-img: Could not open '/dev/fd/63': Could not refresh total sector count: Illegal seek
Signed-off-by: Richard W.M. Jones <rjones@redhat.com>
Reviewed-by: Markus Armbruster <armbru@redhat.com>
Message-id: 1435761614-31358-1-git-send-email-rjones@redhat.com
Fixes: https://bugs.launchpad.net/qemu/+bug/1470536
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
There callers work on a single BlockDriverState subtree, where using
bdrv_drain() is more accurate.
Signed-off-by: Fam Zheng <famz@redhat.com>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Prevously, if we hotplug a device(e.g. device_add e1000) during
migration is processing in source side, qemu will add a new ram
block but migration_bitmap is not extended.
In this case, migration_bitmap will overflow and lead qemu abort
unexpectedly.
Signed-off-by: Li Zhijian <lizhijian@cn.fujitsu.com>
Signed-off-by: Wen Congyang <wency@cn.fujitsu.com>
Signed-off-by: Juan Quintela <quintela@redhat.com>
The section footers check was incorrectly checking the section_id
in the SaveStateEntry not the LoadStateEntry. These can validly be different
if the two QEMU instances have instantiated their devices in a
different order. The test only cares that we're finishing the same
section we started, and hence it's the LoadStateEntry that we care about.
Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Reported-by: Christian Borntraeger <borntraeger@de.ibm.com>
Signed-off-by: Juan Quintela <quintela@redhat.com>
We reuse the migration events from the source side, sending them on the
appropiate place.
Signed-off-by: Juan Quintela <quintela@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Make check fails with events. THis is due to the parser/lexer that it
uses. Just in case that they are more broken parsers, just only send
events when there are capabilities.
Signed-off-by: Juan Quintela <quintela@redhat.com>
Reviewed-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
We have one argument that tells us what event has happened.
Signed-off-by: Juan Quintela <quintela@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
We now use the helper everywhere, so no need to call this on this two
places. See on previous commit that there were a place where we missed
to mark the trace. Now all tracing is done in migrate_set_state().
Signed-off-by: Juan Quintela <quintela@redhat.com>
Reviewed-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
There were three places that were not using the migrate_set_state()
helper, just fix that.
Signed-off-by: Juan Quintela <quintela@redhat.com>
Reviewed-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
It needs to be the first one and it is not optional, that is the reason
why it is opencoded. For new machine types, it is required that machine
type name is the same in both sides.
It is just done right now for pc's.
Signed-off-by: Juan Quintela <quintela@redhat.com>
Reviewed-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
