The impact is small because kvm_get_vcpu_events fixes env->hflags, but
it is wrong and could cause INITs to be delayed arbitrarily with
-machine kernel_irqchip=off.
Reported-by: Achille Fouilleul <achille.fouilleul@gadz.org>
Reviewed-by: Richard Henderson <rth@twiddle.net>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
This changes the *_run_on_cpu APIs (and helpers) to pass data in a
run_on_cpu_data type instead of a plain void *. This is because we
sometimes want to pass a target address (target_ulong) and this fails on
32 bit hosts emulating 64 bit guests.
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Message-Id: <20161027151030.20863-24-alex.bennee@linaro.org>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Assume that KVM would have returned the same on subsequent runs.
Abstract the memoizaiton pattern into macros and call it memorize as
adding the r makes it less obscure.
Reviewed-by: Igor Mammedov <imammedo@redhat.com>
Signed-off-by: Radim Krčmář <rkrcmar@redhat.com>
Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
Cluster x2APIC cannot work without KVM's x2apic API when the maximal
APIC ID is greater than 8 and only KVM's LAPIC can support x2APIC, so we
forbid other APICs and also the old KVM case with less than 9, to
simplify the code.
There is no point in enabling EIM in forbidden APICs, so we keep it
enabled only for the KVM APIC; unconditionally, because making the
option depend on KVM version would be a maintanance burden.
Old QEMUs would enable eim whenever intremap was on, which would trick
guests into thinking that they can enable cluster x2APIC even if any
interrupt destination would get clamped to 8 bits.
Depending on your configuration, QEMU could notice that the destination
LAPIC is not present and report it with a very non-obvious:
KVM: injection failed, MSI lost (Operation not permitted)
Or the guest could say something about unexpected interrupts, because
clamping leads to aliasing so interrupts were being delivered to
incorrect VCPUs.
KVM_X2APIC_API is the feature that allows us to enable EIM for KVM.
QEMU 2.7 allowed EIM whenever interrupt remapping was enabled. In order
to keep backward compatibility, we again allow guests to misbehave in
non-obvious ways, and make it the default for old machine types.
A user can enable the buggy mode it with "x-buggy-eim=on".
Signed-off-by: Radim Krčmář <rkrcmar@redhat.com>
Reviewed-by: Eduardo Habkost <ehabkost@redhat.com>
Reviewed-by: Peter Xu <peterx@redhat.com>
Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
The global variables are not necessary because we can check KVM
feature flags in X86CPU directly.
Reviewed-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
The global variable is not necessary because we can check
cpu->hyperv_time directly.
We just need to ensure cpu->hyperv_time will be cleared if the
feature is not really being exposed to the guest due to missing
KVM_CAP_HYPERV_TIME capability.
Reviewed-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
The global variable is not necessary because we can check
cpu->hyperv_vapic directly.
Reviewed-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
The global variable is not necessary because we can check the CPU
feature flags directly.
Reviewed-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
CPUState is a fairly common pointer to pass to these helpers. This means
if you need other arguments for the async_run_on_cpu case you end up
having to do a g_malloc to stuff additional data into the routine. For
the current users this isn't a massive deal but for MTTCG this gets
cumbersome when the only other parameter is often an address.
This adds the typedef run_on_cpu_func for helper functions which has an
explicit CPUState * passed as the first parameter. All the users of
run_on_cpu and async_run_on_cpu have had their helpers updated to use
CPUState where available.
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
[Sergey Fedorov:
- eliminate more CPUState in user data;
- remove unnecessary user data passing;
- fix target-s390x/kvm.c and target-s390x/misc_helper.c]
Signed-off-by: Sergey Fedorov <sergey.fedorov@linaro.org>
Acked-by: David Gibson <david@gibson.dropbear.id.au> (ppc parts)
Reviewed-by: Christian Borntraeger <borntraeger@de.ibm.com> (s390 parts)
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Message-Id: <1470158864-17651-3-git-send-email-alex.bennee@linaro.org>
Reviewed-by: Richard Henderson <rth@twiddle.net>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
The parsing of KVM_SET_LAPIC's input depends on the current value of the
APIC base MSR---which indeed is stored in APICCommonState---but for historical
reasons APIC base is set through KVM_SET_SREGS together with cr8 (which is
really just the APIC TPR) and the actual "special CPU registers".
APIC base must now be set before the actual LAPIC registers, so do that
in kvm_apic_put. It will be set again to the same value with KVM_SET_SREGS,
but that's not a big issue.
This only happens since Linux 4.8, which checks for x2apic mode in
KVM_SET_LAPIC. However it's really a QEMU bug; until the recent
commit 78d6a05 ("x86/lapic: Load LAPIC state at post_load", 2016-09-13)
QEMU was indeed setting APIC base (via KVM_SET_SREGS) before the other
LAPIC registers.
Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Load the LAPIC state during post_load (rather than when the CPU
starts).
This allows an interrupt to be delivered from the ioapic to
the lapic prior to cpu loading, in particular the RTC that starts
ticking as soon as we load it's state.
Fixes a case where Windows hangs after migration due to RTC interrupts
disappearing.
Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Suggested-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
The kvm_pv_unhalt feature doesn't work if kernel_irqchip is
disabled, so we need to report it as unsupported.
Tested-by: Peter Xu <peterx@redhat.com>
Reviewed-by: Andrew Jones <drjones@redhat.com>
Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
Commit 9af9e0f, 6daf194d, be62a2eb and 312fd5f got rid of a bunch, but
they keep coming back. checkpatch.pl tries to flag them since commit
5d596c2, but it's not very good at it. Offenders tracked down with
Coccinelle script scripts/coccinelle/err-bad-newline.cocci, an updated
version of the script from commit 312fd5f.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Message-Id: <1470224274-31522-2-git-send-email-armbru@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
- interrupt remapping for intel iommus
- a bunch of virtio cleanups
- fixes all over the place
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1
iQEcBAABAgAGBQJXkQsqAAoJECgfDbjSjVRpanoIAJ9JVlc1aEjt9sa0cSBcs+NQ
J7JmgU9FqFsj+4FrNTouO3AxTjHurd1UAULP1WMPD+V3JpbnHct8r6SCBLQ5EBMN
VOjYo4DwWs1g+DqnQ9WZmbadu06XvYi/yiAKNUzWfZk0MR11D0D/S5hmarNKw0Kq
tGHeTWjGeY4WqFLV7m+qB4+cqkAByn6um99UtUvgLL05RgIEIP2IEMKYZ+rXvAa9
iGUvzqlO7mbq/+LbL18kaWywa4TCwbbd2eSGWaqhX4CuB62Rl33mWTXFcfaYhkyp
Z3FgwaJ09h0lAjSVEbyAuLFMfO/BnMcsoKqwl4xc4vkn/xBCqFtgH9JcEVm3O8U=
=ge2D
-----END PGP SIGNATURE-----
Merge remote-tracking branch 'remotes/mst/tags/for_upstream' into staging
pc, pci, virtio: new features, cleanups, fixes
- interrupt remapping for intel iommus
- a bunch of virtio cleanups
- fixes all over the place
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
# gpg: Signature made Thu 21 Jul 2016 18:49:30 BST
# gpg: using RSA key 0x281F0DB8D28D5469
# gpg: Good signature from "Michael S. Tsirkin <mst@kernel.org>"
# gpg: aka "Michael S. Tsirkin <mst@redhat.com>"
# Primary key fingerprint: 0270 606B 6F3C DF3D 0B17 0970 C350 3912 AFBE 8E67
# Subkey fingerprint: 5D09 FD08 71C8 F85B 94CA 8A0D 281F 0DB8 D28D 5469
* remotes/mst/tags/for_upstream: (57 commits)
intel_iommu: avoid unnamed fields
virtio: Update migration docs
virtio-gpu: Wrap in vmstate
virtio-gpu: Use migrate_add_blocker for virgl migration blocking
virtio-input: Wrap in vmstate
9pfs: Wrap in vmstate
virtio-serial: Wrap in vmstate
virtio-net: Wrap in vmstate
virtio-balloon: Wrap in vmstate
virtio-rng: Wrap in vmstate
virtio-blk: Wrap in vmstate
virtio-scsi: Wrap in vmstate
virtio: Migration helper function and macro
virtio-serial: Remove old migration version support
virtio-net: Remove old migration version support
virtio-scsi: Replace HandleOutput typedef
Revert "mirror: Workaround for unexpected iohandler events during completion"
virtio-scsi: Call virtio_add_queue_aio
virtio-blk: Call virtio_add_queue_aio
virtio: Introduce virtio_add_queue_aio
...
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
In the past, we are doing gsi route commit for each irqchip route
update. This is not efficient if we are updating lots of routes in the
same time. This patch removes the committing phase in
kvm_irqchip_update_msi_route(). Instead, we do explicit commit after all
routes updated.
Signed-off-by: Peter Xu <peterx@redhat.com>
Reviewed-by: Paolo Bonzini <pbonzini@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
One more IEC notifier is added to let msi routes know about the IEC
changes. When interrupt invalidation happens, all registered msi routes
will be updated for all PCI devices.
Since both vfio and vhost are possible gsi route consumers, this patch
will go one step further to keep them safe in split irqchip mode and
when irqfd is enabled.
Reviewed-by: Paolo Bonzini <pbonzini@redhat.com>
[move trace-events lines into target-i386/trace-events]
Signed-off-by: Peter Xu <peterx@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Adding two hooks to be notified when adding/removing msi routes. There
are two kinds of MSI routes:
- in kvm_irqchip_add_irq_route(): before assigning IRQFD. Used by
vhost, vfio, etc.
- in kvm_irqchip_send_msi(): when sending direct MSI message, if
direct MSI not allowed, we will first create one MSI route entry
in the kernel, then trigger it.
This patch only hooks the first one (irqfd case). We do not need to
take care for the 2nd one, since it's only used by QEMU userspace
(kvm-apic) and the messages will always do in-time translation when
triggered. While we need to note them down for the 1st one, so that we
can notify the kernel when cache invalidation happens.
Also, we do not hook IOAPIC msi routes (we have explicit notifier for
IOAPIC to keep its cache updated). We only need to care about irqfd
users.
Signed-off-by: Peter Xu <peterx@redhat.com>
Reviewed-by: Paolo Bonzini <pbonzini@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Changing the original MSIMessage parameter in kvm_irqchip_add_msi_route
into the vector number. Vector index provides more information than the
MSIMessage, we can retrieve the MSIMessage using the vector easily. This
will avoid fetching MSIMessage every time before adding MSI routes.
Meanwhile, the vector info will be used in the coming patches to further
enable gsi route update notifications.
Signed-off-by: Peter Xu <peterx@redhat.com>
Reviewed-by: Paolo Bonzini <pbonzini@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
In split irqchip mode, IOAPIC is working in user space, only update
kernel irq routes when entry changed. When IR is enabled, we directly
update the kernel with translated messages. It works just like a kernel
cache for the remapping entries.
Since KVM irqfd is using kernel gsi routes to deliver interrupts, as
long as we can support split irqchip, we will support irqfd as
well. Also, since kernel gsi routes will cache translated interrupts,
irqfd delivery will not suffer from any performance impact due to IR.
And, since we supported irqfd, vhost devices will be able to work
seamlessly with IR now. Logically this should contain both vhost-net and
vhost-user case.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
[move trace-events lines into target-i386/trace-events]
Signed-off-by: Peter Xu <peterx@redhat.com>
Reviewed-by: Paolo Bonzini <pbonzini@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Fill the bits between 51..number-of-physical-address-bits in the
MTRR_PHYSMASKn variable range mtrr masks so that they're consistent
in the migration stream irrespective of the physical address space
of the source VM in a migration.
Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Suggested-by: Paolo Bonzini <pbonzini@redhat.com>
Reviewed-by: Eduardo Habkost <ehabkost@redhat.com>
Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
The CPU GPs if we try and set a bit in a variable MTRR mask above
the limit of physical address bits on the host. We hit this
when loading a migration from a host with a larger physical
address limit than our destination (e.g. a Xeon->i7 of same
generation) but previously used to get away with it
until 48e1a45 started checking that msr writes actually worked.
It seems in our case the GP probably comes from KVM emulating
that GP.
Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Reviewed-by: Eduardo Habkost <ehabkost@redhat.com>
Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
This patch adds the support to inject SRAR and SRAO as LMCE, i.e. they
are injected to only one VCPU rather than broadcast to all VCPUs. As KVM
reports LMCE support on Intel platforms, this features is only available
on Intel platforms.
LMCE is disabled by default and can be enabled/disabled by cpu option
'lmce=on/off'.
Signed-off-by: Ashok Raj <ashok.raj@intel.com>
[Haozhong: Enable LMCE only on Intel platforms
Disable LMCE by default and add a cpu option 'lmce'
Handle the error if LMCE is enabled w/o host support
Remove MCG_LMCE_P from MCE_CAP_DEF
Add migration support for LMCE
Minor code style changes]
Signed-off-by: Haozhong Zhang <haozhong.zhang@intel.com>
Reviewed-by: Eduardo Habkost <ehabkost@redhat.com>
Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
This change adds hyperv feature words report through qom rpc.
When VM is configured with hyperv features enabled
libvirt will check that required feature words are set
in cpuid leaf 40000003 through qom request.
Currently qemu does not report hyperv feature words
which prevents windows guests from starting with libvirt.
To avoid conflicting with current hyperv properties all added feature
words cannot be set directly with -cpu +feature yet.
Signed-off-by: Evgeny Yakovlev <eyakovlev@virtuozzo.com>
Signed-off-by: Denis V. Lunev <den@openvz.org>
CC: Paolo Bonzini <pbonzini@redhat.com>
CC: Richard Henderson <rth@twiddle.net>
CC: Eduardo Habkost <ehabkost@redhat.com>
CC: Marcelo Tosatti <mtosatti@redhat.com>
Reviewed-by: Eduardo Habkost <ehabkost@redhat.com>
Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
Improve the TSC frequency mismatch warning to show the host and
VM TSC frequencies.
Reviewed-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Reviewed-by: Marcelo Tosatti <mtosatti@redhat.com>
Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
Use Coccinelle script to replace 'ret = E; return ret' with
'return E'. The script will do the substitution only when the
function return type and variable type are the same.
Manual fixups:
* audio/audio.c: coding style of "read (...)" and "write (...)"
* block/qcow2-cluster.c: wrap line to make it shorter
* block/qcow2-refcount.c: change indentation of wrapped line
* target-tricore/op_helper.c: fix coding style of
"remainder|quotient"
* target-mips/dsp_helper.c: reverted changes because I don't
want to argue about checkpatch.pl
* ui/qemu-pixman.c: fix line indentation
* block/rbd.c: restore blank line between declarations and
statements
Reviewed-by: Eric Blake <eblake@redhat.com>
Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
Message-Id: <1465855078-19435-4-git-send-email-ehabkost@redhat.com>
Reviewed-by: Markus Armbruster <armbru@redhat.com>
[Unused Coccinelle rule name dropped along with a redundant comment;
whitespace touched up in block/qcow2-cluster.c; stale commit message
paragraph deleted]
Signed-off-by: Markus Armbruster <armbru@redhat.com>
KVM_GET_SUPPORTED_CPUID ioctl is called frequently when initializing
CPU. Depends on CPU features and CPU count, the number of calls can be
extremely high which slows down QEMU booting significantly. In our
testing, we saw 5922 calls with switches:
-cpu SandyBridge -smp 6,sockets=6,cores=1,threads=1
This ioctl takes more than 100ms, which is almost half of the total
QEMU startup time.
While for most cases the data returned from two different invocations
are not changed, that means, we can cache the data to avoid trapping
into kernel for the second time. To make sure the cache safe one
assumption is desirable: the ioctl is stateless. This is not true for
CPUID leaves in general (such as CPUID leaf 0xD, whose value depends
on guest XCR0 and IA32_XSS) but it is true of KVM_GET_SUPPORTED_CPUID,
which runs before there is a value for XCR0 and IA32_XSS.
Signed-off-by: Chao Peng <chao.p.peng@linux.intel.com>
Message-Id: <1465784487-23482-1-git-send-email-chao.p.peng@linux.intel.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
qemu/osdep.h checks whether MAP_ANONYMOUS is defined, but this check
is bogus without a previous inclusion of sys/mman.h. Include it in
sysemu/os-posix.h and remove it from everywhere else.
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Move the old qemu_ram_addr_from_host to memory_region_from_host and
make it return an offset within the region. For qemu_ram_addr_from_host
return the ram_addr_t directly, similar to what it was before
commit 1b5ec23 ("memory: return MemoryRegion from qemu_ram_addr_from_host",
2013-07-04).
Reviewed-by: Marc-André Lureau <marcandre.lureau@gmail.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Simplify kvm_put_tscdeadline_msr() and
kvm_put_msr_feature_control() using kvm_msr_buf and the
kvm_msr_entry_add() helper.
Reviewed-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
Add a helper function that appends new entries to the MSR buffer
and checks for the buffer size limit.
Reviewed-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
We are dangerously close to the array limits in kvm_put_msrs()
and kvm_get_msrs(): with the default mcg_cap configuration, we
can set up to 148 MSRs in kvm_put_msrs(), and if we allow mcg_cap
to be changed, we can write up to 236 MSRs.
Use 4096 bytes for the buffer, that can hold 255 kvm_msr_entry
structs.
Reviewed-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
Instead of using 2400 bytes in the stack for 150 MSR entries in
kvm_get_msrs() and kvm_put_msrs(), allocate a buffer once for
each VCPU.
Reviewed-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
Instead of using offset macros and bit operations in a uint32_t
array, use the X86XSaveArea struct to perform the loading/saving
operations in kvm_put_xsave() and kvm_get_xsave().
Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
Add structs that define the layout of the xsave areas used by
Intel processors. Add some QEMU_BUILD_BUG_ON lines to ensure the
structs match the XSAVE_* macros in target-i386/kvm.c and the
offsets and sizes at target-i386/cpu.c:ext_save_areas.
Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
KVM does not let you read or write this MSR if the corresponding CPUID
bit is not set. This in turn causes MSRs that come after MSR_TSC_AUX
to be ignored by KVM_SET_MSRS.
One visible symptom is that s3.flat from kvm-unit-tests fails with
CPUs that do not have RDTSCP, because the SMBASE is not reset to
0x30000 after reset.
Fixes: c9b8f6b621
Cc: qemu-stable@nongnu.org
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Commit 57cb38b included qapi/error.h into qemu/osdep.h to get the
Error typedef. Since then, we've moved to include qemu/osdep.h
everywhere. Its file comment explains: "To avoid getting into
possible circular include dependencies, this file should not include
any other QEMU headers, with the exceptions of config-host.h,
compiler.h, os-posix.h and os-win32.h, all of which are doing a
similar job to this file and are under similar constraints."
qapi/error.h doesn't do a similar job, and it doesn't adhere to
similar constraints: it includes qapi-types.h. That's in excess of
100KiB of crap most .c files don't actually need.
Add the typedef to qemu/typedefs.h, and include that instead of
qapi/error.h. Include qapi/error.h in .c files that need it and don't
get it now. Include qapi-types.h in qom/object.h for uint16List.
Update scripts/clean-includes accordingly. Update it further to match
reality: replace config.h by config-target.h, add sysemu/os-posix.h,
sysemu/os-win32.h. Update the list of includes in the qemu/osdep.h
comment quoted above similarly.
This reduces the number of objects depending on qapi/error.h from "all
of them" to less than a third. Unfortunately, the number depending on
qapi-types.h shrinks only a little. More work is needed for that one.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
[Fix compilation without the spice devel packages. - Paolo]
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
With Hyper-V enabled CPU hotplug stops working. The CPU appears
in device manager on Windows but does not appear in peformance
monitor and control panel.
The root of the problem is the following. Windows checks
HV_X64_CPU_DYNAMIC_PARTITIONING_AVAILABLE bit in CPUID. The
presence of this bit is enough to cure the situation.
The bit should be set when CPU hotplug is allowed for HyperV VM.
The check that hot_add_cpu callback is defined is enough from the
protocol point of view. Though this callback is defined almost
always thus there is no need to export that knowledge in the
other way.
Signed-off-by: Denis V. Lunev <den@openvz.org>
Reviewed-by: Roman Kagan <rkagan@virtuozzo.com>
CC: Paolo Bonzini <pbonzini@redhat.com>
CC: Richard Henderson <rth@twiddle.net>
CC: Eduardo Habkost <ehabkost@redhat.com>
CC: "Andreas Färber" <afaerber@suse.de>
Reviewed-by: Eduardo Habkost <ehabkost@redhat.com>
Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
This includes XSAVE, XRSTOR, XGETBV, XSETBV, which are all related,
as well as the associate cpuid bits.
Signed-off-by: Richard Henderson <rth@twiddle.net>
Clean up includes so that osdep.h is included first and headers
which it implies are not included manually.
This commit was created with scripts/clean-includes.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Message-id: 1453832250-766-11-git-send-email-peter.maydell@linaro.org
This patch enables migrating vcpu's TSC rate. If KVM on the
destination machine supports TSC scaling, guest programs will
observe a consistent TSC rate across the migration.
If TSC scaling is not supported on the destination machine, the
migration will not be aborted and QEMU on the destination will
not set vcpu's TSC rate to the migrated value.
If vcpu's TSC rate specified by CPU option 'tsc-freq' on the
destination machine is inconsistent with the migrated TSC rate,
the migration will be aborted.
For backwards compatibility, the migration of vcpu's TSC rate is
disabled on pc-*-2.5 and older machine types.
Signed-off-by: Haozhong Zhang <haozhong.zhang@intel.com>
Reviewed-by: Eduardo Habkost <ehabkost@redhat.com>
[ehabkost: Rewrote comment at kvm_arch_put_registers()]
[ehabkost: Moved compat code to pc-2.5]
Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
Following changes are made to the TSC rate setting code in
kvm_arch_init_vcpu():
* The code is moved to a new function kvm_arch_set_tsc_khz().
* If kvm_arch_set_tsc_khz() fails, i.e. following two conditions are
both satisfied:
* KVM does not support the TSC scaling or it fails to set vcpu's
TSC rate by KVM_SET_TSC_KHZ,
* the TSC rate to be set is different than the value currently used
by KVM, then kvm_arch_init_vcpu() will fail. Prevously,
* the lack of TSC scaling never failed kvm_arch_init_vcpu(),
* the failure of KVM_SET_TSC_KHZ failed kvm_arch_init_vcpu()
unconditionally, even though the TSC rate to be set is identical
to the value currently used by KVM.
Signed-off-by: Haozhong Zhang <haozhong.zhang@intel.com>
Reviewed-by: Eduardo Habkost <ehabkost@redhat.com>
Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
