A server may have a reason to reject a request for structured replies,
beyond just not recognizing them as a valid request; similarly, it may
have a reason for rejecting a request for a meta context. It doesn't
hurt us to continue talking to such a server; otherwise 'qemu-nbd
--list' of such a server fails to display all available details about
the export.
Encountered when temporarily tweaking nbdkit to reply with
NBD_REP_ERR_POLICY. Present since structured reply support was first
added (commit d795299b reused starttls handling, but starttls is
different in that we can't fall back to other behavior on any error).
Note that for an unencrypted client trying to connect to a server that
requires encryption, this defers the point of failure to when we
finally execute a strict command (such as NBD_OPT_GO or NBD_OPT_LIST),
now that the intermediate NBD_OPT_STRUCTURED_REPLY does not diagnose
NBD_REP_ERR_TLS_REQD as fatal; but as the protocol eventually gets us
to a command where we can't continue onwards, the changed error
message doesn't cause any security concerns.
Signed-off-by: Eric Blake <eblake@redhat.com>
Message-Id: <20190824172813.29720-3-eblake@redhat.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
[eblake: fix iotest 233]
The NBD specification defines NBD_FLAG_CAN_MULTI_CONN, which can be
advertised when the server promises cache consistency between
simultaneous clients (basically, rules that determine what FUA and
flush from one client are able to guarantee for reads from another
client). When we don't permit simultaneous clients (such as qemu-nbd
without -e), the bit makes no sense; and for writable images, we
probably have a lot more work before we can declare that actions from
one client are cache-consistent with actions from another. But for
read-only images, where flush isn't changing any data, we might as
well advertise multi-conn support. What's more, advertisement of the
bit makes it easier for clients to determine if 'qemu-nbd -e' was in
use, where a second connection will succeed rather than hang until the
first client goes away.
This patch affects qemu as server in advertising the bit. We may want
to consider patches to qemu as client to attempt parallel connections
for higher throughput by spreading the load over those connections
when a server advertises multi-conn, but for now sticking to one
connection per nbd:// BDS is okay.
See also: https://bugzilla.redhat.com/1708300
Signed-off-by: Eric Blake <eblake@redhat.com>
Message-Id: <20190815185024.7010-1-eblake@redhat.com>
[eblake: tweak blockdev-nbd.c to not request shared when writable,
fix iotest 233]
Reviewed-by: John Snow <jsnow@redhat.com>
Quoting cache mode is not needed, and most tests use unquoted values.
Unify all test to use the same style.
Message-id: 20190827173432.7656-1-nsoffer@redhat.com
Signed-off-by: Nir Soffer <nsoffer@redhat.com>
Signed-off-by: Max Reitz <mreitz@redhat.com>
It is possible to enable only a subset of the block drivers with the
"--block-drv-rw-whitelist" option of the "configure" script. All other
drivers are marked as unusable (or only included as read-only with the
"--block-drv-ro-whitelist" option). If an iotest is now using such a
disabled block driver, it is failing - which is bad, since at least the
tests in the "auto" group should be able to deal with this situation.
Thus let's introduce a "_require_drivers" function that can be used by
the shell tests to check for the availability of certain drivers first,
and marks the test as "not run" if one of the drivers is missing.
This patch mainly targets the test in the "auto" group which should
never fail in such a case, but also improves some of the other tests
along the way. Note that we also assume that the "qcow2" and "file"
drivers are always available - otherwise it does not make sense to
run "make check-block" at all (which only tests with qcow2 by default).
Signed-off-by: Thomas Huth <thuth@redhat.com>
Message-id: 20190823133552.11680-1-thuth@redhat.com
Signed-off-by: Max Reitz <mreitz@redhat.com>
Without this argument, qemu will print an angry message about not being
able to connect to a display server if $DISPLAY is not set. For me,
that breaks iotests.supported_formats() because it thus only sees
["Could", "not", "connect"] as the supported formats.
Signed-off-by: Max Reitz <mreitz@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Message-id: 20190819201851.24418-2-mreitz@redhat.com
Reviewed-by: Thomas Huth <thuth@redhat.com>
Signed-off-by: Max Reitz <mreitz@redhat.com>
iotest 126 requires backing file support, which flat vmdks cannot offer.
Skip this test for such subformats.
Signed-off-by: Max Reitz <mreitz@redhat.com>
Message-id: 20190815153638.4600-8-mreitz@redhat.com
Reviewed-by: John Snow <jsnow@redhat.com>
Signed-off-by: Max Reitz <mreitz@redhat.com>
The error message for the test case where we have a quorum node for
which no directory name can be generated is different: For
twoGbMaxExtentSparse, it complains that it cannot open the extent file.
For other (sub)formats, it just notes that it cannot determine the
backing file path. Both are fine, but just disable twoGbMaxExtentSparse
for simplicity's sake.
Signed-off-by: Max Reitz <mreitz@redhat.com>
Reviewed-by: John Snow <jsnow@redhat.com>
Message-id: 20190815153638.4600-7-mreitz@redhat.com
Reviewed-by: John Snow <jsnow@redhat.com>
Signed-off-by: Max Reitz <mreitz@redhat.com>
streamOptimized does not support writes that do not span exactly one
cluster. Furthermore, it cannot rewrite already allocated clusters.
As such, many iotests do not work with it. Disable them.
Signed-off-by: Max Reitz <mreitz@redhat.com>
Message-id: 20190815153638.4600-6-mreitz@redhat.com
Reviewed-by: John Snow <jsnow@redhat.com>
Signed-off-by: Max Reitz <mreitz@redhat.com>
We had a test for a case where relative extent paths did not work, but
unfortunately we just fixed the underlying problem, so it works now.
This patch adds a new test case that still fails.
Signed-off-by: Max Reitz <mreitz@redhat.com>
Reviewed-by: John Snow <jsnow@redhat.com>
Message-id: 20190815153638.4600-4-mreitz@redhat.com
Reviewed-by: John Snow <jsnow@redhat.com>
Signed-off-by: Max Reitz <mreitz@redhat.com>
This makes iotest 033 pass with e.g. subformat=monolithicFlat. It also
turns a former error in 059 into success.
Signed-off-by: Max Reitz <mreitz@redhat.com>
Message-id: 20190815153638.4600-3-mreitz@redhat.com
Reviewed-by: John Snow <jsnow@redhat.com>
Signed-off-by: Max Reitz <mreitz@redhat.com>
fe646693ac changed qemu-img create's output so that it no longer prints
single quotes around parameter values. The subformat and adapter_type
filters in _filter_img_create() have never been adapted to that change.
Fixes: fe646693ac
Signed-off-by: Max Reitz <mreitz@redhat.com>
Reviewed-by: John Snow <jsnow@redhat.com>
Message-id: 20190815153638.4600-2-mreitz@redhat.com
Reviewed-by: John Snow <jsnow@redhat.com>
Signed-off-by: Max Reitz <mreitz@redhat.com>
Using block_resize we can test allocate_first_block() with file
descriptor opened with O_DIRECT, ensuring that it works for any size
larger than 4096 bytes.
Testing smaller sizes is tricky as the result depends on the filesystem
used for testing. For example on NFS any size will work since O_DIRECT
does not require any alignment.
Signed-off-by: Nir Soffer <nsoffer@redhat.com>
Reviewed-by: Max Reitz <mreitz@redhat.com>
Message-id: 20190827010528.8818-3-nsoffer@redhat.com
Signed-off-by: Max Reitz <mreitz@redhat.com>
When creating an image with preallocation "off" or "falloc", the first
block of the image is typically not allocated. When using Gluster
storage backed by XFS filesystem, reading this block using direct I/O
succeeds regardless of request length, fooling alignment detection.
In this case we fallback to a safe value (4096) instead of the optimal
value (512), which may lead to unneeded data copying when aligning
requests. Allocating the first block avoids the fallback.
Since we allocate the first block even with preallocation=off, we no
longer create images with zero disk size:
$ ./qemu-img create -f raw test.raw 1g
Formatting 'test.raw', fmt=raw size=1073741824
$ ls -lhs test.raw
4.0K -rw-r--r--. 1 nsoffer nsoffer 1.0G Aug 16 23:48 test.raw
And converting the image requires additional cluster:
$ ./qemu-img measure -f raw -O qcow2 test.raw
required size: 458752
fully allocated size: 1074135040
When using format like vmdk with multiple files per image, we allocate
one block per file:
$ ./qemu-img create -f vmdk -o subformat=twoGbMaxExtentFlat test.vmdk 4g
Formatting 'test.vmdk', fmt=vmdk size=4294967296 compat6=off hwversion=undefined subformat=twoGbMaxExtentFlat
$ ls -lhs test*.vmdk
4.0K -rw-r--r--. 1 nsoffer nsoffer 2.0G Aug 27 03:23 test-f001.vmdk
4.0K -rw-r--r--. 1 nsoffer nsoffer 2.0G Aug 27 03:23 test-f002.vmdk
4.0K -rw-r--r--. 1 nsoffer nsoffer 353 Aug 27 03:23 test.vmdk
I did quick performance test for copying disks with qemu-img convert to
new raw target image to Gluster storage with sector size of 512 bytes:
for i in $(seq 10); do
rm -f dst.raw
sleep 10
time ./qemu-img convert -f raw -O raw -t none -T none src.raw dst.raw
done
Here is a table comparing the total time spent:
Type Before(s) After(s) Diff(%)
---------------------------------------
real 530.028 469.123 -11.4
user 17.204 10.768 -37.4
sys 17.881 7.011 -60.7
We can see very clear improvement in CPU usage.
Signed-off-by: Nir Soffer <nsoffer@redhat.com>
Message-id: 20190827010528.8818-2-nsoffer@redhat.com
Reviewed-by: Max Reitz <mreitz@redhat.com>
Signed-off-by: Max Reitz <mreitz@redhat.com>
69f47505ee has changed qcow2 in such a way that the commit job run in
test 141 (and 144[1]) returns before it emits the READY event. However,
141 also runs with qed, where the order is still the other way around.
Just filter out the {"return": {}} so the test passes for qed again.
[1] 144 only runs with qcow2, so it is fine as it is.
Suggested-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
Fixes: 69f47505ee
Signed-off-by: Max Reitz <mreitz@redhat.com>
Message-id: 20190809185253.17535-1-mreitz@redhat.com
Reviewed-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
Reviewed-by: John Snow <jsnow@redhat.com>
Signed-off-by: Max Reitz <mreitz@redhat.com>
The result of a sync=full mirror should always be the equal to the
input. Therefore, existing images should be treated as potentially
non-zero and thus should be explicitly initialized to be zero
beforehand.
Signed-off-by: Max Reitz <mreitz@redhat.com>
Message-id: 20190724171239.8764-12-mreitz@redhat.com
Signed-off-by: Max Reitz <mreitz@redhat.com>
Add a test case for converting an empty image (which only returns zeroes
when read) to a preallocated encrypted qcow2 image.
qcow2_has_zero_init() should return 0 then, thus forcing qemu-img
convert to create zero clusters.
Signed-off-by: Max Reitz <mreitz@redhat.com>
Acked-by: Stefano Garzarella <sgarzare@redhat.com>
Tested-by: Stefano Garzarella <sgarzare@redhat.com>
Message-id: 20190724171239.8764-10-mreitz@redhat.com
Reviewed-by: Maxim Levitsky <mlevitsk@redhat.com>
Signed-off-by: Max Reitz <mreitz@redhat.com>
When making backups based on bitmaps, the work estimate can be more
accurate. Update iotests to reflect the new strategy.
TOP work estimates are broken, but do not get worse with this commit.
That issue is addressed in the following commits instead.
Signed-off-by: John Snow <jsnow@redhat.com>
Reviewed-by: Max Reitz <mreitz@redhat.com>
Message-id: 20190716000117.25219-7-jsnow@redhat.com
Signed-off-by: John Snow <jsnow@redhat.com>
Signed-off-by: John Snow <jsnow@redhat.com>
Reviewed-by: Max Reitz <mreitz@redhat.com>
Message-id: 20190716000117.25219-6-jsnow@redhat.com
Signed-off-by: John Snow <jsnow@redhat.com>
This test needs support for non-bitmap backups and missing or
unspecified bitmap sync modes, so rewrite the helpers to be a little
more generic.
Signed-off-by: John Snow <jsnow@redhat.com>
Reviewed-by: Max Reitz <mreitz@redhat.com>
Message-id: 20190716000117.25219-4-jsnow@redhat.com
Signed-off-by: John Snow <jsnow@redhat.com>
Represent a bitmap with an object that we can mark and clear bits in.
This makes it easier to manage partial writes when we don't write a
full group's worth of patterns before an error.
Signed-off-by: John Snow <jsnow@redhat.com>
Reviewed-by: Max Reitz <mreitz@redhat.com>
Message-id: 20190716000117.25219-3-jsnow@redhat.com
Signed-off-by: John Snow <jsnow@redhat.com>
Just kidding, this is easier to manage with a full class instead of a
namedtuple.
Signed-off-by: John Snow <jsnow@redhat.com>
Reviewed-by: Max Reitz <mreitz@redhat.com>
Message-id: 20190716000117.25219-2-jsnow@redhat.com
Signed-off-by: John Snow <jsnow@redhat.com>
Test persistent bitmap copying with and without removal of original
bitmap.
Signed-off-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
Signed-off-by: John Snow <jsnow@redhat.com>
Reviewed-by: Max Reitz <mreitz@redhat.com>
Message-id: 20190708220502.12977-4-jsnow@redhat.com
[Edited comment "bitmap1" --> "bitmap2" as per review. --js]
Signed-off-by: John Snow <jsnow@redhat.com>
Signed-off-by: John Snow <jsnow@redhat.com>
Reviewed-by: Max Reitz <mreitz@redhat.com>
Message-id: 20190709232550.10724-18-jsnow@redhat.com
[Removed 'auto' group, as per new testing config guidelines --js]
Signed-off-by: John Snow <jsnow@redhat.com>
Seems that it comes up enough.
Signed-off-by: John Snow <jsnow@redhat.com>
Reviewed-by: Max Reitz <mreitz@redhat.com>
Message-id: 20190709232550.10724-17-jsnow@redhat.com
Signed-off-by: John Snow <jsnow@redhat.com>
Use "FilePaths" instead of "FilePath" to request multiple files be
cleaned up after we leave that object's scope.
This is not crucial; but it saves a little typing.
Signed-off-by: John Snow <jsnow@redhat.com>
Reviewed-by: Max Reitz <mreitz@redhat.com>
Message-id: 20190709232550.10724-16-jsnow@redhat.com
Signed-off-by: John Snow <jsnow@redhat.com>
run_job can cancel pending jobs to simulate failure. This lets us use
the pending callback to issue test commands while the job is open, but
then still have the job fail in the end.
Signed-off-by: John Snow <jsnow@redhat.com>
Reviewed-by: Max Reitz <mreitz@redhat.com>
Message-id: 20190709232550.10724-15-jsnow@redhat.com
[Maintainer edit: Merge conflict resolution in run_job]
Signed-off-by: John Snow <jsnow@redhat.com>
Because the new-style python tests don't use the iotests.main() test
launcher, we don't turn on the debugger logging for these scripts
when invoked via ./check -d.
Refactor the launcher shim into new and old style shims so that they
share environmental configuration.
Two cleanup notes: debug was not actually used as a global, and there
was no reason to create a class in an inner scope just to achieve
default variables; we can simply create an instance of the runner with
the values we want instead.
Signed-off-by: John Snow <jsnow@redhat.com>
Reviewed-by: Max Reitz <mreitz@redhat.com>
Message-id: 20190709232550.10724-14-jsnow@redhat.com
Signed-off-by: John Snow <jsnow@redhat.com>
We already have 030 for that in general, but this tests very specific
cases of both jobs finishing concurrently.
Signed-off-by: Max Reitz <mreitz@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
This test case is motivated by commit 2b23f28639 ('block/copy-on-read:
Fix permissions for inactive node'). Instead of just testing
copy-on-read on migration, let's stack all sorts of filter nodes on top
of each other and try if the resulting VM can still migrate
successfully. For good measure, put everything into an iothread, because
why not?
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Reviewed-by: Max Reitz <mreitz@redhat.com>
234 implements functions that are useful for doing migration between two
VMs. Move them to iotests.py so that other test cases can use them, too.
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Reviewed-by: Max Reitz <mreitz@redhat.com>
The code path for -device drive=<node-name> or without a drive=...
option for empty drives, which is supposed to be used with -blockdev
differs enough from the -drive based path with a user-owned
BlockBackend, so we want to test both paths at least for the basic tests
implemented by TestInitiallyFilled and TestInitiallyEmpty.
This would have caught the bug recently fixed for inserting read-only
nodes into a scsi-cd created without a drive=... option.
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Reviewed-by: Max Reitz <mreitz@redhat.com>
We're getting a ridiculous number of child classes of
TestInitiallyFilled and TestInitiallyEmpty that differ only in a few
attributes that we want to test in all combinations.
Instead of explicitly writing down every combination, let's use a loop
and create those classes dynamically.
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Reviewed-by: Max Reitz <mreitz@redhat.com>
Signed-off-by: Max Reitz <mreitz@redhat.com>
Message-id: 20190805113526.20319-1-mreitz@redhat.com
Reviewed-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
Signed-off-by: Max Reitz <mreitz@redhat.com>
Perform two guest writes to not yet backed up areas of an image, where
the former touches an inner area of the latter.
Before HEAD^, copy offloading broke this in two ways:
(1) The target image differs from the reference image (what the source
was when the backup started).
(2) But you will not see that in the failing output, because the job
offset is reported as being greater than the job length. This is
because one cluster is copied twice, and thus accounted for twice,
but of course the job length does not increase.
Signed-off-by: Max Reitz <mreitz@redhat.com>
Message-id: 20190801173900.23851-3-mreitz@redhat.com
Reviewed-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
Tested-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
Signed-off-by: Max Reitz <mreitz@redhat.com>
The patch "iotests: Set read-zeroes on in null block driver for Valgrind"
with the commit ID a6862418fe needs the change in 051.out when
compared against on the s390 system.
Fixes: a6862418fe
Reported-by: Christian Borntraeger <borntraeger@de.ibm.com>
Signed-off-by: Andrey Shinkevich <andrey.shinkevich@virtuozzo.com>
Tested-by: Christian Borntraeger <borntraeger@de.ibm.com>
Reviewed-by: John Snow <jsnow@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
The 'seq' command is not available by default on OpenBSD, so these
iotests are currently failing there. It could be installed as 'gseq'
from the coreutils package - but since it is using a different name
there and we are running the iotests with the "bash" shell anyway,
let's simply use the built-in double parentheses for the for-loops
instead.
Signed-off-by: Thomas Huth <thuth@redhat.com>
Message-Id: <20190723111201.1926-1-thuth@redhat.com>
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Remove some more tests from the "auto" group that either have issues
in certain environments (like macOS or FreeBSD, or on certain file systems
like ZFS or tmpfs), do not work with the qcow2 format, or that are simply
taking too much time.
Reviewed-by: Max Reitz <mreitz@redhat.com>
Signed-off-by: Thomas Huth <thuth@redhat.com>
Message-Id: <20190717111947.30356-3-thuth@redhat.com>
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
The regular expressions in the "check" script currently expect that there
is always a space after the test number in the group file, so you can't
have a test in there without a group unless the line still ends with a
space - which is quite error prone since some editors might remove spaces
at the end of lines automatically.
Thus let's fix the regular expressions so that it is also possible to
have lines with one test number only in the group file.
Suggested-by: Max Reitz <mreitz@redhat.com>
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: Max Reitz <mreitz@redhat.com>
Signed-off-by: Thomas Huth <thuth@redhat.com>
Message-Id: <20190717111947.30356-2-thuth@redhat.com>
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
When qemu quits, all throttling should be ignored. That means, if there
is a mirror job running from a throttled node, it should be cancelled
immediately and qemu close without blocking.
Signed-off-by: Max Reitz <mreitz@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Before the previous patches, the first case resulted in a failed
assertion (which is noted as qemu receiving a SIGABRT in the test
output), and the second usually triggered a segmentation fault.
Signed-off-by: Max Reitz <mreitz@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
If a test has issued a quit command already (which may be useful to do
explicitly because the test wants to show its effects),
QEMUMachine.shutdown() should not do so again. Otherwise, the VM may
well return an ECONNRESET which will lead QEMUMachine.shutdown() to
killing it, which then turns into a "qemu received signal 9" line.
Signed-off-by: Max Reitz <mreitz@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
The Valgrind tool reports about the uninitialised buffer 'buf'
instantiated on the stack of the function guess_disk_lchs().
Pass 'read-zeroes=on' to the null block driver to make it deterministic.
The output of the tests 051, 186 and 227 now includes the parameter
'read-zeroes'. So, the benchmark output files are being changed too.
Suggested-by: Kevin Wolf <kwolf@redhat.com>
Signed-off-by: Andrey Shinkevich <andrey.shinkevich@virtuozzo.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
This tests that the stream job exits cleanly (without abort) when the
top node is read-only and cannot be reopened read/write.
Signed-off-by: Max Reitz <mreitz@redhat.com>
Message-id: 20190703172813.6868-12-mreitz@redhat.com
Signed-off-by: Max Reitz <mreitz@redhat.com>
We recently removed the dependency of the stream job on its base node.
That makes it OK to use a commit filter node there. Test that.
Signed-off-by: Max Reitz <mreitz@redhat.com>
Tested-by: Andrey Shinkevich <andrey.shinkevich@virtuozzo.com>
Reviewed-by: Alberto Garcia <berto@igalia.com>
Message-id: 20190703172813.6868-11-mreitz@redhat.com
Signed-off-by: Max Reitz <mreitz@redhat.com>
unittest-style tests generally do not use the log file, but VM.run_job()
can still be useful to them. Add a parameter to it that hides its
output from the log file.
Signed-off-by: Max Reitz <mreitz@redhat.com>
Message-id: 20190703172813.6868-10-mreitz@redhat.com
Signed-off-by: Max Reitz <mreitz@redhat.com>