-The correct error if we cannot find the dev is INCORRECT_LUN rather then
INVALID_INFO_UNIT
-Move the device not found check to the top so we only need to do it once
-Remove the dev->lun != lun checks, dev is returned by scsi_device_find
which searches by lun, so this will never trigger
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Regular scsi cmds should always report their status using a sense-iu, using
the sense code to report any errors.
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
The OS can ask the xhci controller to save and restore its
internal state, which is used by the OS when the system is
suspended and resumed.
This patch handles writes to the save + restore bits in the
command register. Only thing it does is updating the
restore error bit in the status register to signal an error
on restore. The guest OS should do a full reinitialization
after resume then.
This is the minimal patch which gets S3 going with xhci.
Implementing full save/restore support is TBD.
https://bugzilla.redhat.com/show_bug.cgi?id=1012365
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
One of the reworks of qemu's usb core made changes to usb-port's disconnect
handling. Now ports with a device will always have a non 0 dev member, but
if the device is not attached (which is possible with usb redirection),
dev->attached will be 0.
So supplement all checks for dev to also check dev->attached, and add an
extra check in a path where a device check was completely missing.
This fixes various crashes (asserts triggering) I've been seeing when xhci
attached usb devices get disconnected at the wrong time.
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
The qdev_free() function name is misleading since all the function does
is unlink the device from its parent. The device is not necessarily
freed.
The device will be freed when its QObject refcount reaches zero. It is
usual for the parent (bus) to hold the final reference but there are
cases where something else holds a reference so "free" is a misleading
name.
Call object_unparent(obj) directly instead of having a qdev wrapper
function.
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Signed-off-by: Andreas Färber <afaerber@suse.de>
* kraxel/usb.91:
usb-hcd-xhci: Update endpoint context dequeue pointer for streams too
usb-hcd-xhci: Report completion of active transfer with CC_STOPPED on ep stop
usb-hcd-xhci: Remove unused cancelled member from XHCITransfer
usb-hcd-xhci: Remove unused sstreamsm member from XHCIStreamContext
usb-host-libusb: Detach kernel drivers earlier
usb-host-libusb: Configuration 0 may be a valid configuration
usb-host-libusb: Fix reset handling
Message-id: 1382620267-18065-1-git-send-email-kraxel@redhat.com
Signed-off-by: Anthony Liguori <anthony@codemonkey.ws>
This includes some pretty big changes:
- pci master abort support by Marcel
- pci IRQ API rework by Marcel
- acpi generation support by myself
Everything has gone through several revisions, latest versions have been on
list for a while without any more comments, tested by several
people.
Please pull for 1.7.
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1.4.15 (GNU/Linux)
iQEcBAABAgAGBQJSXNO8AAoJECgfDbjSjVRp7VAH/0B73mCOiyVACGx7fazK3SGK
X8TxZWVtG5A77ISqKyrtjLAhK9DCQjEzQTbMNhXHM3Ar6crwo7nJZnQvH2Gh1X2p
34BOQSVc4rtXz5pwDIr48dBLrxeslwXub79chUs+IK1/4RSn3h3nuS3k6JVkmLJN
rcHMj4ljJmi4Hd9vOpmS1jo/a61usi36hhU7CMgcrsXzStZycBBzCozOB3VW8p1X
/iwyf91YjmNPkn9gA3/aViGjszu8jE91dkA0C+ljwvcGbs2yEl3LCWEJfsMvoh5P
2M+k0XXbHwq/P9PFMa/2/lWOo4EO4Oxa+G/6QvovJrteYnktr+E9DqjU8pCT7yI=
=CVfs
-----END PGP SIGNATURE-----
Merge remote-tracking branch 'mst/tags/for_anthony' into staging
pci, pc, acpi fixes, enhancements
This includes some pretty big changes:
- pci master abort support by Marcel
- pci IRQ API rework by Marcel
- acpi generation support by myself
Everything has gone through several revisions, latest versions have been on
list for a while without any more comments, tested by several
people.
Please pull for 1.7.
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
# gpg: Signature made Tue 15 Oct 2013 07:33:48 AM CEST using RSA key ID D28D5469
# gpg: Can't check signature: public key not found
* mst/tags/for_anthony: (39 commits)
ssdt-proc: update generated file
ssdt: fix PBLK length
i386: ACPI table generation code from seabios
pc: use new api to add builtin tables
acpi: add interface to access user-installed tables
hpet: add API to find it
pvpanic: add API to access io port
ich9: APIs for pc guest info
piix: APIs for pc guest info
acpi/piix: add macros for acpi property names
i386: define pc guest info
loader: allow adding ROMs in done callbacks
i386: add bios linker/loader
loader: use file path size from fw_cfg.h
acpi: ssdt pcihp: updat generated file
acpi: pre-compiled ASL files
acpi: add rules to compile ASL source
i386: add ACPI table files from seabios
q35: expose mmcfg size as a property
q35: use macro for MCFG property name
...
Message-id: 1381818560-18367-1-git-send-email-mst@redhat.com
Signed-off-by: Anthony Liguori <anthony@codemonkey.ws>
With streams the endpoint context dequeue pointer should point to the
dequeue value for the currently active stream.
At least Linux guests expect it to point to value set by an set_ep_dequeue
upon completion of the set_ep_dequeue (before kicking the ep).
Otherwise the Linux kernel will complain (and things won't work):
xhci_hcd 0000:00:05.0: Mismatch between completed Set TR Deq Ptr command & xHCI internal state.
xhci_hcd 0000:00:05.0: ep deq seg = ffff8800366f0880, deq ptr = ffff8800366ec010
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
As we should per the XHCI spec "4.6.9 Stop Endpoint".
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Since qemu's USB model is geared towards emulated devices cancellation
is instanteneous, so no need to wait for cancellation to complete, as
such there is no wait for cancellation code, and the cancelled bool
as well as the bogus comment about it can be removed.
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
If we detach the kernel drivers on the first set_config, then they will
be still attached when the device gets its initial reset. Causing the drivers
to re-initialize the device after the reset, dirtying the device state.
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Quoting from: linux/Documentation/ABI/stable/sysfs-bus-usb:
Note that some devices, in violation of the USB spec, have a
configuration with a value equal to 0. Writing 0 to
bConfigurationValue for these devices will install that
configuration, rather then unconfigure the device.
So don't compare the configuration value against 0 to check for unconfigured
devices, instead check for a LIBUSB_ERROR_NOT_FOUND return from
libusb_get_active_config_descriptor().
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
The guest will issue an initial device reset when the device is attached, but
since the current usb-host-libusb code only actually does the reset when
udev->configuration != 0, and on attach the device is not yet configured,
the reset gets ignored. This means that the device gets passed to the guest
in an unknown state, which is not good.
The udev->configuration check is there because of the release / claim
interfaces done around the libusb_device_reset call, but these are not
necessary. If interfaces are claimed when libusb_device_reset gets called
libusb will release + reclaim them itself.
The usb_host_ep_update call also is not necessary. If the reset succeeds the
original config and interface alt settings will be restored.
Last if the reset fails, that means the device has either disconnected or
morphed into an another device and has been completely re-enumerated,
so it is treated by the host as a new device and our handle is invalid,
so on reset failure we need to call usb_host_nodev().
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
pci_set_irq and the other pci irq wrappers use
PCI_INTERRUPT_PIN config register to compute device
INTx pin to assert/deassert.
An irq is allocated using pci_allocate_irq wrapper
only if is needed by non pci devices.
Removed irq related fields from state if not used anymore.
Signed-off-by: Marcel Apfelbaum <marcel.a@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Device communication errors need to be reported to driver.
Add a debug message while at it.
Signed-off-by: Jan Vesely <jano.vesely@gmail.com>
Acked-by: Gerd Hoffmann <kraxel@gmail.com>
Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
The USBPacket-s in the transfers need to be cleaned up so that the memory
allocated by the iovec in there gets freed.
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
And use it instead of prying the USBEndpoint out of the packet struct
in various places.
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Transfers are part of an epctx, which is part of a slot, which is part of
a xhci. Transfers cannot dynamically be moved from one epctx to another,
so once created their xhci, slotid and epid are constant, so lets set these
up at creation time, rather then re-initializing them with the same
value each time a transfer gets submitted.
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
According to the xhci spec the total number of streams is
2 ^ (MaxPStreams + 1), and this is also how the Linux xhci driver
uses this field.
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
The usb-host code has been rewritten for qemu 1.5 to use libusb,
the old code has been left in as temporary fallback. Now we are
two releases further out, targeting the 1.7 release. No major
issues with the new code poped up until now. Time to remove it
from tre tree. Should we ever need it again for some reason --
git has a copy for us in the history.
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Use usb_legacy_register handling to create bt-dongle device and remove code
dependency from vl.c so CONFIG_USB_BLUETOOTH can be disabled.
Signed-off-by: Miroslav Rezanina <mrezanin@redhat.com>
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
This reverts commit a309ee6e0a.
This isn't in line with the usb specification and adds regressions,
win7 fails to drive the usb hub for example.
Was added because it "solved" the issue of hubs interacting badly
with the xhci host controller. Now with the root cause being fixed
in xhci (commit <FIXME>) we can revert this one.
Cc: qemu-stable@nongnu.org
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
usb3 bulk endpoints with streams are implicitly pipelined now,
so the requests will actually be processed in parallel. Also
allow them to complete out-of-order.
Fixes stalls in the uas driver.
Cc: qemu-stable@nongnu.org
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Respect the interval for interrupt endpoints, so we don't finish
transfers as fast as possible but at the rate configured by the guest.
Fixes guest deadlocks triggered by interrupt storms.
Cc:
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
To be passed to object_initialize().
Since commit 39355c3826 the argument is
void*, so drop some superfluous (BusState *) casts or direct parent
field usages.
Signed-off-by: Andreas Färber <afaerber@suse.de>
To be passed to qbus_create_inplace().
Use DEVICE() cast to avoid a direct parent field access.
Reviewed-by: Wenchao Xia <xiawenc@linux.vnet.ibm.com>
Signed-off-by: Andreas Färber <afaerber@suse.de>
To be passed to qbus_create_inplace().
Use DEVICE() casts instead of direct parent field access.
Reviewed-by: Wenchao Xia <xiawenc@linux.vnet.ibm.com>
Acked-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Andreas Färber <afaerber@suse.de>
This is an autogenerated patch using scripts/switch-timer-api.
Switch the entire code base to using the new timer API.
Note this patch may introduce some line length issues.
Signed-off-by: Alex Bligh <alex@alex.org.uk>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
include/qemu/timer.h has no need to include main-loop.h and
doing so causes an issue for the next patch. Unfortunately
various files assume including timers.h will pull in main-loop.h.
Untangle this mess.
Signed-off-by: Alex Bligh <alex@alex.org.uk>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Rename four functions in preparation for new API.
Rename qemu_timer_expired to timer_expired
Rename qemu_timer_expire_time_ns to timer_expire_time_ns
Rename qemu_timer_pending to timer_pending
Rename qemu_timer_expired_ns to timer_expired_ns
Signed-off-by: Alex Bligh <alex@alex.org.uk>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Reinitialize dev->cs to NULL after deleting it, to make sure it isn't
used afterwards.
Reported-by: Martin Cerveny <M.Cerveny@computer.org>
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Guest trying to reset a endpoint of a disconnected device resulted in
xhci trying to dereference uport while being NULL, thereby crashing
qemu. Fix that by adding a check. Drop unused dev variable while
touching that code bit.
Cc: qemu-stable@nongnu.org
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Current hcd-ohci does not handle DMA errors. However they may happen
so here we introduce simple error handling.
On such errors, a typical OHCI will stop operating, signal the guest
about the error by sending "UnrecoverableError Event", set itself into
error state and set "Detected Parity Error" in its PCI config space
to signal that it got an error and so does the patch.
This also adds ohci_die() call to ohci_bus_start() to handle possible
failure of qemu_new_timer_ns().
Signed-off-by: Alexey Kardashevskiy <aik@ozlabs.ru>
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
When the guest goes suspend the uhci controller while there are
pending resume requests on the ports go signal global resume
instantly.
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>