virtio-mem logically plugs/unplugs memory within a sparse memory region
and notifies via the RamDiscardManager interface when parts become
plugged (populated) or unplugged (discarded).
Currently, we end up (via the two users)
1) zeroing all logically unplugged/discarded memory during TPM resets.
2) reading all logically unplugged/discarded memory when dumping, to
figure out the content is zero.
1) is always bad, because we assume unplugged memory stays discarded
(and is already implicitly zero).
2) isn't that bad with anonymous memory, we end up reading the zero
page (slow and unnecessary, though). However, once we use some
file-backed memory (future use case), even reading will populate memory.
Let's cut out all parts marked as not-populated (discarded) via the
RamDiscardManager. As virtio-mem is the single user, this now means that
logically unplugged memory ranges will no longer be included in the
dump, which results in smaller dump files and faster dumping.
virtio-mem has a minimum granularity of 1 MiB (and the default is usually
2 MiB). Theoretically, we can see quite some fragmentation, in practice
we won't have it completely fragmented in 1 MiB pieces. Still, we might
end up with many physical ranges.
Both, the ELF format and kdump seem to be ready to support many
individual ranges (e.g., for ELF it seems to be UINT32_MAX, kdump has a
linear bitmap).
Reviewed-by: Peter Xu <peterx@redhat.com>
Cc: Marc-André Lureau <marcandre.lureau@redhat.com>
Cc: Paolo Bonzini <pbonzini@redhat.com>
Cc: "Michael S. Tsirkin" <mst@redhat.com>
Cc: Eduardo Habkost <ehabkost@redhat.com>
Cc: Alex Williamson <alex.williamson@redhat.com>
Cc: Dr. David Alan Gilbert <dgilbert@redhat.com>
Cc: Igor Mammedov <imammedo@redhat.com>
Cc: Claudio Fontana <cfontana@suse.de>
Cc: Thomas Huth <thuth@redhat.com>
Cc: "Alex Bennée" <alex.bennee@linaro.org>
Cc: Peter Xu <peterx@redhat.com>
Cc: Laurent Vivier <lvivier@redhat.com>
Cc: Stefan Berger <stefanb@linux.ibm.com>
Signed-off-by: David Hildenbrand <david@redhat.com>
Message-Id: <20210727082545.17934-5-david@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Let's factor out adding a MemoryRegionSection to the list, to be reused in
RamDiscardManager context next.
Reviewed-by: Stefan Berger <stefanb@linux.ibm.com>
Reviewed-by: Peter Xu <peterx@redhat.com>
Cc: Marc-André Lureau <marcandre.lureau@redhat.com>
Cc: Paolo Bonzini <pbonzini@redhat.com>
Cc: "Michael S. Tsirkin" <mst@redhat.com>
Cc: Eduardo Habkost <ehabkost@redhat.com>
Cc: Alex Williamson <alex.williamson@redhat.com>
Cc: Dr. David Alan Gilbert <dgilbert@redhat.com>
Cc: Igor Mammedov <imammedo@redhat.com>
Cc: Claudio Fontana <cfontana@suse.de>
Cc: Thomas Huth <thuth@redhat.com>
Cc: "Alex Bennée" <alex.bennee@linaro.org>
Cc: Peter Xu <peterx@redhat.com>
Cc: Laurent Vivier <lvivier@redhat.com>
Cc: Stefan Berger <stefanb@linux.ibm.com>
Signed-off-by: David Hildenbrand <david@redhat.com>
Message-Id: <20210727082545.17934-4-david@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Let's make sure to not merge when different memory regions are involved.
Unlikely, but theoretically possible.
Acked-by: Stefan Berger <stefanb@linux.ibm.com>
Reviewed-by: Peter Xu <peterx@redhat.com>
Cc: Marc-André Lureau <marcandre.lureau@redhat.com>
Cc: Paolo Bonzini <pbonzini@redhat.com>
Cc: "Michael S. Tsirkin" <mst@redhat.com>
Cc: Eduardo Habkost <ehabkost@redhat.com>
Cc: Alex Williamson <alex.williamson@redhat.com>
Cc: Dr. David Alan Gilbert <dgilbert@redhat.com>
Cc: Igor Mammedov <imammedo@redhat.com>
Cc: Claudio Fontana <cfontana@suse.de>
Cc: Thomas Huth <thuth@redhat.com>
Cc: "Alex Bennée" <alex.bennee@linaro.org>
Cc: Peter Xu <peterx@redhat.com>
Cc: Laurent Vivier <lvivier@redhat.com>
Cc: Stefan Berger <stefanb@linux.ibm.com>
Signed-off-by: David Hildenbrand <david@redhat.com>
Message-Id: <20210727082545.17934-3-david@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Trace at memory_region_sync_dirty_bitmap() for log_sync() or global_log_sync()
on memory regions. One trace line should suffice when it finishes, so as to
estimate the time used for each log sync process.
Signed-off-by: Peter Xu <peterx@redhat.com>
Message-Id: <20210817013706.30986-1-peterx@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Provide a name field for all the memory listeners. It can be used to identify
which memory listener is which.
Signed-off-by: Peter Xu <peterx@redhat.com>
Reviewed-by: David Hildenbrand <david@redhat.com>
Message-Id: <20210817013553.30584-2-peterx@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Add a new RAMBlock flag to denote "protected" memory, i.e. memory that
looks and acts like RAM but is inaccessible via normal mechanisms,
including DMA. Use the flag to skip protected memory regions when
mapping RAM for DMA in VFIO.
Signed-off-by: Sean Christopherson <sean.j.christopherson@intel.com>
Signed-off-by: Yang Zhong <yang.zhong@intel.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
By default, QEMU will allow devices to be plugged into a bus up to
the bus class's device count limit. If the user creates a device on
the command line or via the monitor and doesn't explicitly specify
the bus to plug it in, QEMU will plug it into the first non-full bus
that it finds.
This is fine in most cases, but some machines have multiple buses of
a given type, some of which are dedicated to on-board devices and
some of which have an externally exposed connector for user-pluggable
devices. One example is I2C buses.
Provide a new function qbus_mark_full() so that a machine model can
mark this kind of "internal only" bus as 'full' after it has created
all the devices that should be plugged into that bus. The "find a
non-full bus" algorithm will then skip the internal-only bus when
looking for a place to plug in user-created devices.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20210903151435.22379-2-peter.maydell@linaro.org
It's not that much complicated to type "-display sdl" or "-display curses",
so we should not clutter our main option name space with such simple
wrapper options and rather present the users with a concise interface
instead. Thus let's deprecate the "-sdl" and "-curses" wrapper options now.
Message-Id: <20210825092023.81396-4-thuth@redhat.com>
Reviewed-by: Gerd Hoffmann <kraxel@redhat.com>
Acked-by: Peter Krempa <pkrempa@redhat.com>
Signed-off-by: Thomas Huth <thuth@redhat.com>
The alt_grab and ctrl_grab parameter of the -display sdl option prevent
the QAPIfication of the "sdl" part of the -display option, so we should
eventually remove them. And since this feature is also rather niche anyway,
we should not clutter the top-level option list with these, so let's
also deprecate the "-alt-grab" and the "-ctrl-grab" options while we're
at it.
Once the deprecation period of "alt_grab" and "ctrl_grab" is over, we
then can finally switch the -display sdl option to use QAPI internally,
too.
Message-Id: <20210825092023.81396-3-thuth@redhat.com>
Reviewed-by: Gerd Hoffmann <kraxel@redhat.com>
Acked-by: Peter Krempa <pkrempa@redhat.com>
Signed-off-by: Thomas Huth <thuth@redhat.com>
The -display sdl option is not using QAPI internally yet, and uses hand-
crafted parsing instead (see parse_display() in vl.c), which is quite
ugly, since most of the other code is using the QAPIfied DisplayOption
already. Unfortunately, the "alt_grab" and "ctrl_grab" use underscores in
their names which has recently been forbidden in new QAPI code, so
a straight conversion is not possible. While we could add some exceptions
to the QAPI schema parser for this, the way these parameters have been
designed was maybe a bad idea anyway: First, it's not possible to enable
both parameters at the same time, thus instead of two boolean parameters
it would be better to have only one multi-choice parameter instead.
Second, the naming is also somewhat unfortunate since the "alt_grab"
parameter is not about the ALT key, but rather about the left SHIFT key
that has to be used additionally when the parameter is enabled.
So instead of trying to QAPIfy "alt_grab" and "ctrl_grab", let's rather
introduce an alternative to these parameters instead, a new parameter
called "grab-mod" which can either be set to "lshift-lctrl-lalt" or to
"rctrl". In case we ever want to support additional modes later, we can
then also simply extend the list of supported strings here.
Message-Id: <20210825092023.81396-2-thuth@redhat.com>
Reviewed-by: Gerd Hoffmann <kraxel@redhat.com>
Signed-off-by: Thomas Huth <thuth@redhat.com>
The realpath() function can return NULL on error, so we need to check
for it to avoid crashing when we try to strstr() into it.
This can happen if we run out of memory, or if /sys/ is not mounted,
among other situations.
Fixes: Coverity 1459913, 1460474
Fixes: ce317be98d ("exec: fetch the alignment of Linux devdax pmem character device nodes")
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Jingqi Liu <jingqi.liu@intel.com>
Message-id: 20210812151525.31456-1-peter.maydell@linaro.org
In the alignment check added to qemu_ram_alloc_from_fd() in commit
ce317be98d, the condition includes a check that 'mr' is not
NULL. This check is unnecessary because we can assume that the
caller always passes us a valid MemoryRegion, and indeed later in the
function we assume mr is not NULL when we pass it to file_ram_alloc()
as new_block->mr. Remove it.
Fixes: Coverity 1459867
Fixes: ce317be98d ("exec: fetch the alignment of Linux devdax pmem character device nodes")
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Jingqi Liu <jingqi.liu@intel.com>
Message-id: 20210812150624.29139-1-peter.maydell@linaro.org
The QEMU_ARCH_VIRTIO_* defines are used only in one file,
qdev-monitor.c. Move them to that file.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Markus Armbruster <armbru@redhat.com>
Message-id: 20210730105947.28215-7-peter.maydell@linaro.org
Instead of using an ifdef ladder in arch_init.c (which we then have
to manually update every time we add or remove a target
architecture), have meson.build put "#define QEMU_ARCH QEMU_ARCH_FOO"
in the config-target.h file.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20210730105947.28215-5-peter.maydell@linaro.org
arch_init.c does very little but has a long list of #include lines.
Remove all the unnecessary ones.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20210730105947.28215-4-peter.maydell@linaro.org
The kvm_available() function reports whether KVM support was
compiled into the QEMU binary; it returns the value of the
CONFIG_KVM define.
The only place in the codebase where we use this function is
in qmp_query_kvm(). Now that accelerators are based on QOM
classes we can instead use accel_find("kvm") and remove the
kvm_available() function.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20210730105947.28215-3-peter.maydell@linaro.org
The xen_available() function is used only to produce an error
for some Xen-specific command line options in QEMU binaries where
Xen support was not compiled in: it just returns the value of
the CONFIG_XEN define.
Now that accelerators are QOM classes, we can check for
"does this binary have Xen compiled in" with accel_find("xen"),
and drop the xen_available() function.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20210730105947.28215-2-peter.maydell@linaro.org
The Error ** argument must be NULL, &error_abort, &error_fatal, or a
pointer to a variable containing NULL. Passing an argument of the
latter kind twice without clearing it in between is wrong: if the
first call sets an error, it no longer points to NULL for the second
call.
machine_parse_property_opt() is wrong that way: it passes @errp to
keyval_parse() without checking for failure, then passes it to
keyval_merge(). Harmless, since the only caller passes &error_fatal.
Clean up: drop the parameter, and use &error_fatal directly.
Cc: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Message-Id: <20210720125408.387910-16-armbru@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Acked-by: Michael S. Tsirkin <mst@redhat.com>
[Rebased, conflict with commit a3c2f12830 resolved]
We did this with scripts/coccinelle/use-error_fatal.cocci before, in
commit 50beeb6809 and 007b06578a. This commit cleans up rarer
variations that don't seem worth matching with Coccinelle.
Cc: Thomas Huth <thuth@redhat.com>
Cc: Cornelia Huck <cornelia.huck@de.ibm.com>
Cc: Peter Xu <peterx@redhat.com>
Cc: Juan Quintela <quintela@redhat.com>
Cc: Stefan Hajnoczi <stefanha@redhat.com>
Cc: Paolo Bonzini <pbonzini@redhat.com>
Cc: Marc-André Lureau <marcandre.lureau@redhat.com>
Cc: Gerd Hoffmann <kraxel@redhat.com>
Cc: Daniel P. Berrangé <berrange@redhat.com>
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Message-Id: <20210720125408.387910-2-armbru@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Peter Xu <peterx@redhat.com>
Acked-by: Michael S. Tsirkin <mst@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
When adding RAM_NORESERVE, we forgot to remove the old assertion when
adding the updated one, most probably when reworking the patches or
rebasing. We can easily crash QEMU by adding
-object memory-backend-ram,id=mem0,size=500G,reserve=off
to the QEMU cmdline:
qemu-system-x86_64: ../softmmu/physmem.c:2146: qemu_ram_alloc_internal:
Assertion `(ram_flags & ~(RAM_SHARED | RAM_RESIZEABLE | RAM_PREALLOC))
== 0' failed.
Fix it by removing the old assertion.
Fixes: 8dbe22c686 ("memory: Introduce RAM_NORESERVE and wire it up in qemu_ram_mmap()")
Reviewed-by: Peter Xu <peterx@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Tested-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Reviewed-by: Pankaj Gupta <pankaj.gupta@ionos.com>
Signed-off-by: David Hildenbrand <david@redhat.com>
Message-id: 20210805092350.31195-1-david@redhat.com
Cc: Paolo Bonzini <pbonzini@redhat.com>
Cc: Peter Xu <peterx@redhat.com>
Cc: Philippe Mathieu-Daudé <philmd@redhat.com>
Signed-off-by: David Hildenbrand <david@redhat.com>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
-readconfig is still recording SMP options in QemuOpts instead of
using machine_opts_dict. This means that SMP options from -readconfig
are ignored.
Just stop using QemuOpts for -smp, making it return false for
is_qemuopts_group. Configuration files will merge the values in
machine_opts_dict using the new function machine_merge_property.
At the same time, fix -mem-prealloc which looked at QemuOpts to find the
number of guest CPUs, which it used as the default number of preallocation
threads.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
It will be used to parse smp-opts config groups from configuration
files. The point to note is that it does not steal a reference
from the caller. This is better because this function will be called
from qemu_config_foreach's callback; qemu_config_foreach does not cede
its reference to the qdict to the callback, and wants to free it. To
balance that extra reference, machine_parse_property_opt now needs
a qobject_unref.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
We continue after -smp help:
$ qemu-system-x86_64 -smp help -display none -monitor stdio
smp-opts options:
cores=<num>
cpus=<num>
dies=<num>
maxcpus=<num>
sockets=<num>
threads=<num>
QEMU 6.0.50 monitor - type 'help' for more information
(qemu)
Other options, such as -object help and -device help, don't.
Adjust -smp not to continue either.
Cc: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Message-Id: <20210720125408.387910-17-armbru@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Reviewed-by: Pankaj Gupta <pankaj.gupta@ionos.com>
Acked-by: Michael S. Tsirkin <mst@redhat.com>
Do not instantiate an extra default VGA device if -device virtio-vga-gl
is provided.
Related to commit b36eb8860f ("virtio-gpu:
add virtio-vga-gl")
Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Message-Id: <20210701062421.721414-1-marcandre.lureau@redhat.com>
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Use it to avoid some clang-12 -Watomic-alignment errors,
forcing some structures to be aligned and as a pointer when
we have ensured that the address is aligned.
Tested-by: Cole Robinson <crobinso@redhat.com>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
qemu can't start a xen vm after commit d8fb7d0969
"vl: switch -M parsing to keyval" with:
$ ./qemu-system-i386 -M xenfv
Unexpected error in object_property_find_err() at ../qom/object.c:1298:
qemu-system-i386: Property 'xenfv-3.1-machine.accel' not found
Aborted (core dumped)
The default_machine_opts handling doesn't process the legacy machine
options like "accel". Call qemu_apply_legacy_machine_options to provide
the legacy handling.
Signed-off-by: Jason Andryuk <jandryuk@gmail.com>
Message-Id: <20210713021552.19110-1-jandryuk@gmail.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Recent GLibC calls sched_getaffinity in code paths related to malloc and
when QEMU blocks access, it sends it off into a bad codepath resulting
in stack exhaustion[1]. The GLibC bug is being fixed[2], but none the
less, GLibC has valid reasons to want to use sched_getaffinity.
It is not unreasonable for code to want to run many resource syscalls
for information gathering, so it is a bit too harsh for QEMU to block
them.
[1] https://bugzilla.redhat.com/show_bug.cgi?id=1975693
[2] https://sourceware.org/pipermail/libc-alpha/2021-June/128271.html
Reviewed-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Acked-by: Eduardo Otubo <otubo@redhat.com>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
MemoryRegion names is cached on first call to memory_region_name(),
so displaying the name is trace events is cheap. Add it for read /
write ops.
Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Reviewed-by: Laurent Vivier <laurent@vivier.eu>
Message-Id: <20210307074833.143106-1-f4bug@amsat.org>
Signed-off-by: Laurent Vivier <laurent@vivier.eu>
Coverity reports that qemu_parse_config_group is returning without
unrefing the "crumpled" dictionary in case its top level item is a
list. But actually the contract with qemu_record_config_group is
the same as for qemu_parse_config_group itself: if those function
need to stash the dictionary they get, they have to take a reference
themselves (currently this is never the case for either function).
Therefore, just add an unconditional qobject_unref(crumpled) to
qemu_parse_config_group.
Reported-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Add module_allow_arch() to set the target architecture.
In case a module is limited to some arch verify arches
match and ignore the module if not.
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Reviewed-by: Jose R. Ziviani <jziviani@suse.de>
Message-Id: <20210624103836.2382472-19-kraxel@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Use module database to figure which module adds given QemuOpts group.
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Reviewed-by: Paolo Bonzini <pbonzini@redhat.com>
Reviewed-by: Jose R. Ziviani <jziviani@suse.de>
Message-Id: <20210624103836.2382472-17-kraxel@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Add script to generate C source with a small
database containing the module meta-data.
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Reviewed-by: Jose R. Ziviani <jziviani@suse.de>
Message-Id: <20210624103836.2382472-4-kraxel@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
We want to separate the two cases whereby we discard ram
- uncoordinated: e.g., virito-balloon
- coordinated: e.g., virtio-mem coordinated via the RamDiscardManager
Reviewed-by: Pankaj Gupta <pankaj.gupta@cloud.ionos.com>
Acked-by: Michael S. Tsirkin <mst@redhat.com>
Cc: Paolo Bonzini <pbonzini@redhat.com>
Cc: "Michael S. Tsirkin" <mst@redhat.com>
Cc: Alex Williamson <alex.williamson@redhat.com>
Cc: Dr. David Alan Gilbert <dgilbert@redhat.com>
Cc: Igor Mammedov <imammedo@redhat.com>
Cc: Pankaj Gupta <pankaj.gupta.linux@gmail.com>
Cc: Peter Xu <peterx@redhat.com>
Cc: Auger Eric <eric.auger@redhat.com>
Cc: Wei Yang <richard.weiyang@linux.alibaba.com>
Cc: teawater <teawaterz@linux.alibaba.com>
Cc: Marek Kedzierski <mkedzier@redhat.com>
Signed-off-by: David Hildenbrand <david@redhat.com>
Message-Id: <20210413095531.25603-12-david@redhat.com>
Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
We have users in migration context that don't hold the BQL (when
finishing migration). To prepare for further changes, use a dedicated mutex
instead of atomic operations. Keep using qatomic_read ("READ_ONCE") for the
functions that only extract the current state (e.g., used by
virtio-balloon), locking isn't necessary.
While at it, split up the counter into two variables to make it easier
to understand.
Suggested-by: Peter Xu <peterx@redhat.com>
Reviewed-by: Peter Xu <peterx@redhat.com>
Reviewed-by: Pankaj Gupta <pankaj.gupta@cloud.ionos.com>
Acked-by: Michael S. Tsirkin <mst@redhat.com>
Cc: Paolo Bonzini <pbonzini@redhat.com>
Cc: "Michael S. Tsirkin" <mst@redhat.com>
Cc: Alex Williamson <alex.williamson@redhat.com>
Cc: Dr. David Alan Gilbert <dgilbert@redhat.com>
Cc: Igor Mammedov <imammedo@redhat.com>
Cc: Pankaj Gupta <pankaj.gupta.linux@gmail.com>
Cc: Peter Xu <peterx@redhat.com>
Cc: Auger Eric <eric.auger@redhat.com>
Cc: Wei Yang <richard.weiyang@linux.alibaba.com>
Cc: teawater <teawaterz@linux.alibaba.com>
Cc: Marek Kedzierski <mkedzier@redhat.com>
Signed-off-by: David Hildenbrand <david@redhat.com>
Message-Id: <20210413095531.25603-11-david@redhat.com>
Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
In case one wants to create a permanent copy of a MemoryRegionSections,
one needs access to flatview_ref()/flatview_unref(). Instead of exposing
these, let's just add helpers to copy/free a MemoryRegionSection and
properly adjust references.
Cc: Paolo Bonzini <pbonzini@redhat.com>
Cc: "Michael S. Tsirkin" <mst@redhat.com>
Cc: Alex Williamson <alex.williamson@redhat.com>
Cc: Dr. David Alan Gilbert <dgilbert@redhat.com>
Cc: Igor Mammedov <imammedo@redhat.com>
Cc: Pankaj Gupta <pankaj.gupta.linux@gmail.com>
Cc: Peter Xu <peterx@redhat.com>
Cc: Auger Eric <eric.auger@redhat.com>
Cc: Wei Yang <richard.weiyang@linux.alibaba.com>
Cc: teawater <teawaterz@linux.alibaba.com>
Cc: Marek Kedzierski <mkedzier@redhat.com>
Signed-off-by: David Hildenbrand <david@redhat.com>
Message-Id: <20210413095531.25603-3-david@redhat.com>
Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
We have some special RAM memory regions (managed by virtio-mem), whereby
the guest agreed to only use selected memory ranges. "unused" parts are
discarded so they won't consume memory - to logically unplug these memory
ranges. Before the VM is allowed to use such logically unplugged memory
again, coordination with the hypervisor is required.
This results in "sparse" mmaps/RAMBlocks/memory regions, whereby only
coordinated parts are valid to be used/accessed by the VM.
In most cases, we don't care about that - e.g., in KVM, we simply have a
single KVM memory slot. However, in case of vfio, registering the
whole region with the kernel results in all pages getting pinned, and
therefore an unexpected high memory consumption - discarding of RAM in
that context is broken.
Let's introduce a way to coordinate discarding/populating memory within a
RAM memory region with such special consumers of RAM memory regions: they
can register as listeners and get updates on memory getting discarded and
populated. Using this machinery, vfio will be able to map only the
currently populated parts, resulting in discarded parts not getting pinned
and not consuming memory.
A RamDiscardManager has to be set for a memory region before it is getting
mapped, and cannot change while the memory region is mapped.
Note: At some point, we might want to let RAMBlock users (esp. vfio used
for nvme://) consume this interface as well. We'll need RAMBlock notifier
calls when a RAMBlock is getting mapped/unmapped (via the corresponding
memory region), so we can properly register a listener there as well.
Reviewed-by: Pankaj Gupta <pankaj.gupta@cloud.ionos.com>
Acked-by: Michael S. Tsirkin <mst@redhat.com>
Cc: Paolo Bonzini <pbonzini@redhat.com>
Cc: "Michael S. Tsirkin" <mst@redhat.com>
Cc: Alex Williamson <alex.williamson@redhat.com>
Cc: Dr. David Alan Gilbert <dgilbert@redhat.com>
Cc: Igor Mammedov <imammedo@redhat.com>
Cc: Pankaj Gupta <pankaj.gupta.linux@gmail.com>
Cc: Peter Xu <peterx@redhat.com>
Cc: Auger Eric <eric.auger@redhat.com>
Cc: Wei Yang <richard.weiyang@linux.alibaba.com>
Cc: teawater <teawaterz@linux.alibaba.com>
Cc: Marek Kedzierski <mkedzier@redhat.com>
Signed-off-by: David Hildenbrand <david@redhat.com>
Message-Id: <20210413095531.25603-2-david@redhat.com>
Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
Make -smp syntactic sugar for a compound property "-machine
smp.{cores,threads,cpu,...}". machine_smp_parse is replaced by the
setter for the property.
numa-test will now cover the new syntax, while other tests
still use -smp.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Switch from QemuOpts to keyval. This enables the introduction
of non-scalar machine properties, and JSON syntax in the future.
For JSON syntax to be supported right now, we would have to
consider what would happen if string-based dictionaries (produced by
-M key=val) were to be merged with strongly-typed dictionaries
(produced by -M {'key': 123}).
The simplest way out is to never enter the situation, and only allow one
-M option when JSON syntax is in use. However, we want options such as
-smp to become syntactic sugar for -M, and this is a problem; as soon
as -smp becomes a shortcut for -M, QEMU would forbid using -M '{....}'
together with -smp. Therefore, allowing JSON syntax right now for -M
would be a forward-compatibility nightmare and it would be impossible
anyway to introduce -M incrementally in tools.
Instead, support for JSON syntax is delayed until after the main
options are converted to QOM compound properties. These include -boot,
-acpitable, -smbios, -m, -semihosting-config, -rtc and -fw_cfg. Once JSON
syntax is introduced, these options will _also_ be forbidden together
with -M '{...}'.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
It's just a wrapper around the -display ...,window-close=off parameter,
and the name "no-quit" is rather confusing compared to "window-close"
(since there are still other means to quit the emulator), so we should
rather tell our users to use the "window-close" parameter instead.
While we're at it, update the documentation to state that
"-no-quit" is available for GTK, too, not only for SDL.
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Signed-off-by: Thomas Huth <thuth@redhat.com>
Message-Id: <20210630163231.467987-4-thuth@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
According to the QAPI schema, there is a "-" and not a "_" between
"window" and "close", and we're also talking about "window-close"
in the long parameter description in qemu-options.hx, so we should
make sure that we rather use the variant with the "-" by default
instead of only allowing the one with the "_" here. The old way
still stays enabled for compatibility, but we deprecate it, so that
we can switch to a QAPIfied parameter one day more easily.
Signed-off-by: Thomas Huth <thuth@redhat.com>
Message-Id: <20210630163231.467987-3-thuth@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
The frame parameter has been removed along with the support for
SDL 1.2.
Fixes: 09bd7ba9f5 ("Remove deprecated -no-frame option")
Signed-off-by: Thomas Huth <thuth@redhat.com>
Message-Id: <20210630163231.467987-2-thuth@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Libvirt's "domcapabilities" command has a way to state whether certain
graphic frontends are available in QEMU or not. Originally, libvirt
looked at the "--help" output of the QEMU binary to determine whether
SDL was available or not (by looking for the "-sdl" parameter in the
help text), but since libvirt stopped doing this analysis of the help
text, the detection of SDL is currently broken, see:
https://bugzilla.redhat.com/show_bug.cgi?id=1790902
QEMU should provide a way via the QMP interface instead. A simple way,
without introducing additional commands, is to make the DisplayType
enum entries conditional, so that the enum only contains the entries if
the corresponding CONFIG_xxx switches have been set. This of course
only gives an indication which possibilities have been enabled during
compile-time of QEMU (and does not take into account whether modules
are later available or not for example - for this we'd need a separate
command), but anyway, this should already be good enough for the above
bug ticket, and it's a good idea anyway to make the QMP interface
conditional here, so let's simply do it.
Signed-off-by: Thomas Huth <thuth@redhat.com>
Message-Id: <20210615090439.70926-1-thuth@redhat.com>
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Let's support RAM_NORESERVE via MAP_NORESERVE on Linux. The flag has no
effect on most shared mappings - except for hugetlbfs and anonymous memory.
Linux man page:
"MAP_NORESERVE: Do not reserve swap space for this mapping. When swap
space is reserved, one has the guarantee that it is possible to modify
the mapping. When swap space is not reserved one might get SIGSEGV
upon a write if no physical memory is available. See also the discussion
of the file /proc/sys/vm/overcommit_memory in proc(5). In kernels before
2.6, this flag had effect only for private writable mappings."
Note that the "guarantee" part is wrong with memory overcommit in Linux.
Also, in Linux hugetlbfs is treated differently - we configure reservation
of huge pages from the pool, not reservation of swap space (huge pages
cannot be swapped).
The rough behavior is [1]:
a) !Hugetlbfs:
1) Without MAP_NORESERVE *or* with memory overcommit under Linux
disabled ("/proc/sys/vm/overcommit_memory == 2"), the following
accounting/reservation happens:
For a file backed map
SHARED or READ-only - 0 cost (the file is the map not swap)
PRIVATE WRITABLE - size of mapping per instance
For an anonymous or /dev/zero map
SHARED - size of mapping
PRIVATE READ-only - 0 cost (but of little use)
PRIVATE WRITABLE - size of mapping per instance
2) With MAP_NORESERVE, no accounting/reservation happens.
b) Hugetlbfs:
1) Without MAP_NORESERVE, huge pages are reserved.
2) With MAP_NORESERVE, no huge pages are reserved.
Note: With "/proc/sys/vm/overcommit_memory == 0", we were already able
to configure it for !hugetlbfs globally; this toggle now allows
configuring it more fine-grained, not for the whole system.
The target use case is virtio-mem, which dynamically exposes memory
inside a large, sparse memory area to the VM.
[1] https://www.kernel.org/doc/Documentation/vm/overcommit-accounting
Reviewed-by: Peter Xu <peterx@redhat.com>
Acked-by: Eduardo Habkost <ehabkost@redhat.com> for memory backend and machine core
Signed-off-by: David Hildenbrand <david@redhat.com>
Message-Id: <20210510114328.21835-10-david@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Let's introduce RAM_NORESERVE, allowing mmap'ing with MAP_NORESERVE. The
new flag has the following semantics:
"
RAM is mmap-ed with MAP_NORESERVE. When set, reserving swap space (or huge
pages if applicable) is skipped: will bail out if not supported. When not
set, the OS will do the reservation, if supported for the memory type.
"
Allow passing it into:
- memory_region_init_ram_nomigrate()
- memory_region_init_resizeable_ram()
- memory_region_init_ram_from_file()
... and teach qemu_ram_mmap() and qemu_anon_ram_alloc() about the flag.
Bail out if the flag is not supported, which is the case right now for
both, POSIX and win32. We will add Linux support next and allow specifying
RAM_NORESERVE via memory backends.
The target use case is virtio-mem, which dynamically exposes memory
inside a large, sparse memory area to the VM.
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Reviewed-by: Peter Xu <peterx@redhat.com>
Acked-by: Eduardo Habkost <ehabkost@redhat.com> for memory backend and machine core
Signed-off-by: David Hildenbrand <david@redhat.com>
Message-Id: <20210510114328.21835-9-david@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Let's pass flags instead of bools to prepare for passing other flags and
update the documentation of qemu_ram_mmap(). Introduce new QEMU_MAP_
flags that abstract the mmap() PROT_ and MAP_ flag handling and simplify
it.
We expose only flags that are currently supported by qemu_ram_mmap().
Maybe, we'll see qemu_mmap() in the future as well that can implement these
flags.
Note: We don't use MAP_ flags as some flags (e.g., MAP_SYNC) are only
defined for some systems and we want to always be able to identify
these flags reliably inside qemu_ram_mmap() -- for example, to properly
warn when some future flags are not available or effective on a system.
Also, this way we can simplify PROT_ handling as well.
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Reviewed-by: Peter Xu <peterx@redhat.com>
Acked-by: Eduardo Habkost <ehabkost@redhat.com> for memory backend and machine core
Signed-off-by: David Hildenbrand <david@redhat.com>
Message-Id: <20210510114328.21835-8-david@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Let's pass ram_flags to qemu_ram_alloc() and qemu_ram_alloc_internal(),
preparing for passing additional flags.
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Acked-by: Eduardo Habkost <ehabkost@redhat.com> for memory backend and machine core
Signed-off-by: David Hildenbrand <david@redhat.com>
Message-Id: <20210510114328.21835-7-david@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Let's pass in ram flags just like we do with qemu_ram_alloc_from_file(),
to clean up and prepare for more flags.
Simplify the documentation of passed ram flags: Looking at our
documentation of RAM_SHARED and RAM_PMEM is sufficient, no need to be
repetitive.
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Reviewed-by: Peter Xu <peterx@redhat.com>
Acked-by: Eduardo Habkost <ehabkost@redhat.com> for memory backend and machine core
Signed-off-by: David Hildenbrand <david@redhat.com>
Message-Id: <20210510114328.21835-5-david@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
RAM_SHARED now also properly indicates shared anonymous memory. Let's check
that flag for anonymous memory as well, to restore the proper mapping.
Fixes: 06329ccecf ("mem: add share parameter to memory-backend-ram")
Reviewed-by: Peter Xu <peterx@redhat.com>
Signed-off-by: David Hildenbrand <david@redhat.com>
Message-Id: <20210406080126.24010-4-david@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
We can create shared anonymous memory via
"-object memory-backend-ram,share=on,..."
which is, for example, required by PVRDMA for mremap() to work.
Shared anonymous memory is weird, though. Instead of MADV_DONTNEED, we
have to use MADV_REMOVE: MADV_DONTNEED will only remove / zap all
relevant page table entries of the current process, the backend storage
will not get removed, resulting in no reduced memory consumption and
a repopulation of previous content on next access.
Shared anonymous memory is internally really just shmem, but without a
fd exposed. As we cannot use fallocate() without the fd to discard the
backing storage, MADV_REMOVE gets the same job done without a fd as
documented in "man 2 madvise". Removing backing storage implicitly
invalidates all page table entries with relevant mappings - an additional
MADV_DONTNEED is not required.
Fixes: 06329ccecf ("mem: add share parameter to memory-backend-ram")
Reviewed-by: Peter Xu <peterx@redhat.com>
Reviewed-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Signed-off-by: David Hildenbrand <david@redhat.com>
Message-Id: <20210406080126.24010-3-david@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Let's drop the "shared" parameter from ram_block_add() and properly
store it in the flags of the ram block instead, such that
qemu_ram_is_shared() properly succeeds on all ram blocks that were mapped
MAP_SHARED.
We'll use this information next to fix some cases with shared anonymous
memory.
Reviewed-by: Igor Kotrasinski <i.kotrasinsk@partner.samsung.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Peter Xu <peterx@redhat.com>
Signed-off-by: David Hildenbrand <david@redhat.com>
Message-Id: <20210406080126.24010-2-david@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Based on the description of error_setg(), the local variable err in
qemu_init_subsystems() should be initialized to NULL.
Fixes: efd7ab22fb ("vl: extract qemu_init_subsystems")
Cc: qemu-stable@nongnu.org
Signed-off-by: Peng Liang <liangpeng10@huawei.com>
Message-Id: <20210610131729.3906565-1-liangpeng10@huawei.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Based on the description of error_setg(), the local variable err in
qemu_maybe_daemonize() should be initialized to NULL.
Without fix, the uninitialized *errp triggers assert failure which
doesn't show much valuable information.
Before the fix:
qemu-system-x86_64: ../util/error.c:59: error_setv: Assertion `*errp == NULL' failed.
After fix:
qemu-system-x86_64: cannot create PID file: Cannot open pid file: Permission denied
Signed-off-by: Zhenzhong Duan <zhenzhong.duan@intel.com>
Message-Id: <20210610084741.456260-1-zhenzhong.duan@intel.com>
Cc: qemu-stable@nongnu.org
Fixes: 0546c0609c ("vl: split various early command line options to a separate function", 2020-12-10)
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
The VM stop process has to flush outstanding I/O and this is a critical
failure scenario that is hard to diagnose. Add a probe point that
records the flush return code.
Reviewed-by: Connor Kuehl <ckuehl@redhat.com>
Reviewed-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
Commit bc2f4fcb1d ("qom: move user_creatable_add_opts logic to vl.c
and QAPIfy it", 2021-03-19) switched the creation of objects from
qemu_opts_foreach to a bespoke QTAILQ in preparation for supporting JSON
syntax in -object.
Unfortunately in doing so it lost support for [object] stanzas in
configuration files and also for "-set object.ID.KEY=VAL". The latter
is hard to re-establish and probably best solved by deprecating -set.
This patch uses the infrastructure introduced by the previous two
patches in order to parse QOM objects correctly from configuration
files.
Cc: Markus Armbruster <armbru@redhat.com>
Cc: qemu-stable@nongnu.org
Reviewed-by: Kevin Wolf <kwolf@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Message-Id: <20210524105752.3318299-4-pbonzini@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Let -readconfig support parsing command line options into QDict or
QemuOpts. This will be used to add back support for objects in
-readconfig.
Cc: Markus Armbruster <armbru@redhat.com>
Cc: qemu-stable@nongnu.org
Reviewed-by: Kevin Wolf <kwolf@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Message-Id: <20210524105752.3318299-3-pbonzini@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Change the parser to put the values into a QDict and pass them
to a callback. qemu_config_parse's QemuOpts creation is
itself turned into a callback function.
This is useful for -readconfig to support keyval-based options;
getting a QDict from the parser removes a roundtrip from
QDict to QemuOpts and then back to QDict.
Unfortunately there is a disadvantage in that semantic errors will
point to the last line of the group, because the entries of the QDict
do not have a location attached.
Cc: Kevin Wolf <kwolf@redhat.com>
Cc: Markus Armbruster <armbru@redhat.com>
Cc: qemu-stable@nongnu.org
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Message-Id: <20210524105752.3318299-2-pbonzini@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Commit e50caf4a5c ("tracing: convert documentation to rST")
converted docs/devel/tracing.txt to docs/devel/tracing.rst.
We still have several references to the old file, so let's fix them
with the following command:
sed -i s/tracing.txt/tracing.rst/ $(git grep -l docs/devel/tracing.txt)
Signed-off-by: Stefano Garzarella <sgarzare@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Message-Id: <20210517151702.109066-2-sgarzare@redhat.com>
Signed-off-by: Thomas Huth <thuth@redhat.com>
This patch enables reverse debugging with watchpoints.
Reverse continue scans the execution to find the breakpoints
and watchpoints that should fire. It uses helper function
replay_breakpoint() for that. But this function needs to access
icount, which can't be correct in the middle of TB.
Therefore, in case of watchpoint, we have to retranslate the block
to allow this access.
Signed-off-by: Pavel Dovgalyuk <Pavel.Dovgalyuk@ispras.ru>
Message-Id: <162072430303.827403.7379783546934958566.stgit@pasha-ThinkPad-X280>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Right now the SPICE module is special cased to be loaded when processing
of the -spice command line option. However, the spice option group
can also be brought in via -readconfig, in which case the module is
not loaded.
Add a generic hook to load modules that provide a QemuOpts group,
and use it for the "spice" and "iscsi" groups.
Fixes: #194
Fixes: https://bugs.launchpad.net/qemu/+bug/1910696
Cc: qemu-stable@nongnu.org
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Starting in QEMU 6.0's commit f5c9fcb82d ("vl: separate
qemu_create_machine", 2020-12-10), a function have_custom_ram_size()
replaced the return value of set_memory_options().
The purpose of the return value was to record the presence of
"-m size", and if it was not there, change the default RAM
size to the size of the memory backend passed with "-M
memory-backend".
With that commit, however, have_custom_ram_size() is now queried only
after set_memory_options has stored the fixed-up RAM size in QemuOpts for
"future use". This was actually the only future use of the fixed-up RAM
size, so remove that code and fix the bug.
Cc: qemu-stable@nongnu.org
Fixes: f5c9fcb82d ("vl: separate qemu_create_machine", 2020-12-10)
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
These headers are also included from softmmu/vl.c, so they should be
in include/. Remove qemu-options-wrapper.h, since elsewhere
we include "template" headers directly and #define the parameters in
the including file; move qemu-options.h to include/.
Reviewed-by: Markus Armbruster <armbru@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Some of the memory listener may want to do log synchronization without
being able to specify a range of memory to sync but always globally.
Such a memory listener should provide this new method instead of the
log_sync() method.
Obviously we can also achieve similar thing when we put the global
sync logic into a log_sync() handler. However that's not efficient
enough because otherwise memory_global_dirty_log_sync() may do the
global sync N times, where N is the number of flat ranges in the
address space.
Make this new method be exclusive to log_sync().
Reviewed-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Signed-off-by: Peter Xu <peterx@redhat.com>
Message-Id: <20210506160549.130416-2-peterx@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
The qtest server right now can only be created using the -qtest
and -qtest-log options. Allow an alternative way to create it
using "-object qtest,chardev=...,log=...".
This is part of the long term plan to make more (or all) of
QEMU configurable through QMP and preconfig mode.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Fix of the 2021-05-11 version, with a fix to build on the armhf
cross.
The largest change in this set is David's changes for ram block size
changing; then there's a pile of other cleanups and fixes.
Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
-----BEGIN PGP SIGNATURE-----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=RJvy
-----END PGP SIGNATURE-----
Merge remote-tracking branch 'remotes/dgilbert/tags/pull-migration-20210513a' into staging
Migration pull 2021-05-13
Fix of the 2021-05-11 version, with a fix to build on the armhf
cross.
The largest change in this set is David's changes for ram block size
changing; then there's a pile of other cleanups and fixes.
Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
# gpg: Signature made Thu 13 May 2021 18:36:06 BST
# gpg: using RSA key 45F5C71B4A0CB7FB977A9FA90516331EBC5BFDE7
# gpg: Good signature from "Dr. David Alan Gilbert (RH2) <dgilbert@redhat.com>" [full]
# Primary key fingerprint: 45F5 C71B 4A0C B7FB 977A 9FA9 0516 331E BC5B FDE7
* remotes/dgilbert/tags/pull-migration-20210513a:
tests/migration: introduce multifd into guestperf
tests/qtest/migration-test: Use g_autofree to avoid leaks on error paths
tests/migration-test: Fix "true" vs true
migration/ram: Use offset_in_ramblock() in range checks
migration/multifd: Print used_length of memory block
migration/ram: Handle RAM block resizes during postcopy
migration/ram: Simplify host page handling in ram_load_postcopy()
migration/ram: Discard RAM when growing RAM blocks after ram_postcopy_incoming_init()
exec: Relax range check in ram_block_discard_range()
migration/ram: Handle RAM block resizes during precopy
numa: Make all callbacks of ram block notifiers optional
numa: Teach ram block notifiers about resizeable ram blocks
util: vfio-helpers: Factor out and fix processing of existing ram blocks
migration: Drop redundant query-migrate result @blocked
migration/ram: Optimize ram_save_host_page()
migration/ram: Reduce unnecessary rate limiting
migrate/ram: remove "ram_bulk_stage" and "fpo_enabled"
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
We want to make use of ram_block_discard_range() in the RAM block resize
callback when growing a RAM block, *before* used_length is changed.
Let's relax the check. As RAM blocks always mmap the whole max_length area,
we cannot corrupt unrelated data.
Reviewed-by: Peter Xu <peterx@redhat.com>
Signed-off-by: David Hildenbrand <david@redhat.com>
Message-Id: <20210429112708.12291-6-david@redhat.com>
Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Resizing while migrating is dangerous and does not work as expected.
The whole migration code works on the usable_length of ram blocks and does
not expect this to change at random points in time.
In the case of precopy, the ram block size must not change on the source,
after syncing the RAM block list in ram_save_setup(), so as long as the
guest is still running on the source.
Resizing can be trigger *after* (but not during) a reset in
ACPI code by the guest
- hw/arm/virt-acpi-build.c:acpi_ram_update()
- hw/i386/acpi-build.c:acpi_ram_update()
Use the ram block notifier to get notified about resizes. Let's simply
cancel migration and indicate the reason. We'll continue running on the
source. No harm done.
Update the documentation. Postcopy will be handled separately.
Reviewed-by: Peter Xu <peterx@redhat.com>
Signed-off-by: David Hildenbrand <david@redhat.com>
Message-Id: <20210429112708.12291-5-david@redhat.com>
Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Manual merge
Ram block notifiers are currently not aware of resizes. To properly
handle resizes during migration, we want to teach ram block notifiers about
resizeable ram.
Introduce the basic infrastructure but keep using max_size in the
existing notifiers. Supply the max_size when adding and removing ram
blocks. Also, notify on resizes.
Acked-by: Paul Durrant <paul@xen.org>
Reviewed-by: Peter Xu <peterx@redhat.com>
Cc: xen-devel@lists.xenproject.org
Cc: haxm-team@intel.com
Cc: Paul Durrant <paul@xen.org>
Cc: Stefano Stabellini <sstabellini@kernel.org>
Cc: Anthony Perard <anthony.perard@citrix.com>
Cc: Wenchao Wang <wenchao.wang@intel.com>
Cc: Colin Xu <colin.xu@intel.com>
Signed-off-by: David Hildenbrand <david@redhat.com>
Message-Id: <20210429112708.12291-3-david@redhat.com>
Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Factor it out into common code when a new notifier is registered, just
as done with the memory region notifier. This keeps logic about how to
process existing ram blocks at a central place.
Just like when adding a new ram block, we have to register the max_length.
Ram blocks are only "fake resized". All memory (max_length) is mapped.
Print the warning from inside qemu_vfio_ram_block_added().
Reviewed-by: Peter Xu <peterx@redhat.com>
Signed-off-by: David Hildenbrand <david@redhat.com>
Message-Id: <20210429112708.12291-2-david@redhat.com>
Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Target unicore32 was deprecated in commit 8e4ff4a8d2, v5.2.0. See
there for rationale.
Cc: Guan Xuetao <gxt@mprc.pku.edu.cn>
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Message-Id: <20210503084034.3804963-3-armbru@redhat.com>
Acked-by: Thomas Huth <thuth@redhat.com>
Target lm32 was deprecated in commit d849800512, v5.2.0. See there
for rationale.
Some of its code lives on in device models derived from milkymist
ones: hw/char/digic-uart.c and hw/display/bcm2835_fb.c.
Cc: Michael Walle <michael@walle.cc>
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Message-Id: <20210503084034.3804963-2-armbru@redhat.com>
Acked-by: Michael Walle <michael@walle.cc>
[Trivial conflicts resolved, reST markup fixed]
There are no known users of this CPU anymore, and there are no
binaries available online which could be used for regression tests,
so the code has likely completely bit-rotten already. It's been
marked as deprecated since two releases now and nobody spoke up
that there is still a need to keep it, thus let's remove it now.
Signed-off-by: Thomas Huth <thuth@redhat.com>
Message-Id: <20210430160355.698194-1-thuth@redhat.com>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
[Commit message typos fixed, trivial conflicts resolved]
Signed-off-by: Markus Armbruster <armbru@redhat.com>
move the call for sysemu specifically in machine_run_board_init,
mirror the calling sequence for user mode too.
Suggested-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Claudio Fontana <cfontana@suse.de>
Message-Id: <20210322132800.7470-23-cfontana@suse.de>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Stop including exec/address-spaces.h in files that don't need it.
Signed-off-by: Thomas Huth <thuth@redhat.com>
Message-Id: <20210416171314.2074665-5-thuth@redhat.com>
Signed-off-by: Laurent Vivier <laurent@vivier.eu>
Stop including cpu.h in files that don't need it.
Signed-off-by: Thomas Huth <thuth@redhat.com>
Message-Id: <20210416171314.2074665-4-thuth@redhat.com>
Signed-off-by: Laurent Vivier <laurent@vivier.eu>
Stop including hw/boards.h in files that don't need it.
Signed-off-by: Thomas Huth <thuth@redhat.com>
Message-Id: <20210416171314.2074665-3-thuth@redhat.com>
Signed-off-by: Laurent Vivier <laurent@vivier.eu>
Stop including sysemu/sysemu.h in files that don't need it.
Signed-off-by: Thomas Huth <thuth@redhat.com>
Message-Id: <20210416171314.2074665-2-thuth@redhat.com>
Signed-off-by: Laurent Vivier <laurent@vivier.eu>
This patch moves static last_delta variable into timers_state
structure to allow correct vmstate operations with icount shift=auto enabled.
Signed-off-by: Pavel Dovgalyuk <Pavel.Dovgalyuk@ispras.ru>
Message-Id: <161701335066.1180180.7104085247702343395.stgit@pasha-ThinkPad-X280>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Similarly to 5f629d943c ("s390x: fix s390 virtio aliases"),
define the virtio aliases.
This allows to start machines with virtio devices without
knowledge of the implementation type.
For instance, we can use "-device virtio-scsi" on
m68k, s390x or PC, and the device will be respectively
"virtio-scsi-device", "virtio-scsi-ccw" or "virtio-scsi-pci".
This already exists for s390x and -ccw interfaces, add them
for m68k and MMIO (-device) interfaces.
Signed-off-by: Laurent Vivier <laurent@vivier.eu>
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Reviewed-by: Cornelia Huck <cohuck@redhat.com>
Message-Id: <20210319202335.2397060-3-laurent@vivier.eu>
Message-Id: <20210323165308.15244-18-alex.bennee@linaro.org>
This is used to define virtio-*-pci and virtio-*-ccw aliases
rather than substracting the CCW architecture from all the others.
Signed-off-by: Laurent Vivier <laurent@vivier.eu>
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: Cornelia Huck <cohuck@redhat.com>
Message-Id: <20210319202335.2397060-2-laurent@vivier.eu>
Message-Id: <20210323165308.15244-17-alex.bennee@linaro.org>
The function flatview_for_each_range() calls a callback for each
range in a FlatView. Currently the callback gets the start and
length of the range and the MemoryRegion involved, but not the offset
within the MemoryRegion. Add this to the callback's arguments; we're
going to want it for a new use in the next commit.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Message-id: 20210318174823.18066-4-peter.maydell@linaro.org
New option -compat lets you configure what to do when deprecated
interfaces get used. This is intended for testing users of the
management interfaces. It is experimental.
-compat deprecated-input=<input-policy> configures what to do when
deprecated input is received. Input policy can be "accept" (accept
silently), or "reject" (reject the request with an error).
-compat deprecated-output=<out-policy> configures what to do when
deprecated output is sent. Output policy can be "accept" (pass on
unchanged), or "hide" (filter out the deprecated parts).
Default is "accept". Policies other than "accept" are implemented
later in this series.
For now, -compat covers only syntactic aspects of QMP, i.e. stuff
tagged with feature 'deprecated'. We may want to extend it to cover
semantic aspects, CLI, and experimental features.
Note that there is no good way for management application to detect
presence of -compat: it's not visible output of query-qmp-schema or
query-command-line-options. Tolerable, because it's meant for
testing. If running with -compat fails, skip the test.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Message-Id: <20210318155519.1224118-3-armbru@redhat.com>
Several QOM type names contain ',':
ARM,bitband-memory
etraxfs,pic
etraxfs,serial
etraxfs,timer
fsl,imx25
fsl,imx31
fsl,imx6
fsl,imx6ul
fsl,imx7
grlib,ahbpnp
grlib,apbpnp
grlib,apbuart
grlib,gptimer
grlib,irqmp
qemu,register
SUNW,bpp
SUNW,CS4231
SUNW,DBRI
SUNW,DBRI.prom
SUNW,fdtwo
SUNW,sx
SUNW,tcx
xilinx,zynq_slcr
xlnx,zynqmp
xlnx,zynqmp-pmu-soc
xlnx,zynq-xadc
These are all device types. They can't be plugged with -device /
device_add, except for xlnx,zynqmp-pmu-soc, and I doubt that one
actually works.
They *can* be used with -device / device_add to request help.
Usability is poor, though: you have to double the comma, like this:
$ qemu-system-x86_64 -device SUNW,,fdtwo,help
Trap for the unwary. The fact that this was broken in
device-introspect-test for more than six years until commit e27bd49876
fixed it demonstrates that "the unwary" includes seasoned developers.
One QOM type name contains ' ': "ICH9 SMB". Because having to
remember just one way to quote would be too easy.
Rename the "SUNW,FOO types to "sun-FOO". Summarily replace ',' and '
' by '-' in the other type names.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Message-Id: <20210304140229.575481-2-armbru@redhat.com>
Reviewed-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
Acked-by: Paolo Bonzini <pbonzini@redhat.com>
Drop the crap deprecated in commit a1b40bda08 "blockdev: Deprecate
-drive with bogus interface type" (v5.1.0).
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Reviewed-by: John Snow <jsnow@redhat.com>
Message-id: 20210309161214.1402527-5-armbru@redhat.com
Signed-off-by: John Snow <jsnow@redhat.com>
Extend the ObjectOption code that was added in the previous patch to
enable passing JSON to -object. Even though we cannot yet add
non-scalar properties with the human-friendly comma-separated syntax,
they can now be added as JSON.
Reviewed-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Kevin Wolf <kwolf@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Message-Id: <20210312173547.1283477-4-pbonzini@redhat.com>
Reviewed-by: Markus Armbruster <armbru@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Emulators are currently using OptsVisitor (via user_creatable_add_opts)
to parse the -object command line option. This has one extra feature,
compared to keyval, which is automatic conversion of integers to lists
as well as support for lists as repeated options:
-object memory-backend-ram,id=pc.ram,size=1048576000,host-nodes=0,policy=bind
So we cannot replace OptsVisitor with keyval right now. Still, this
patch moves the user_creatable_add_opts logic to vl.c since it is
not needed anywhere else, and makes it go through user_creatable_add_qapi.
In order to minimize code changes, the predicate still takes a string.
This can be changed later to use the ObjectType QAPI enum directly.
Reviewed-by: Eric Blake <eblake@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Message-Id: <20210312173547.1283477-3-pbonzini@redhat.com>
Reviewed-by: Markus Armbruster <armbru@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
The 'ide-hd' and 'ide-cd' devices provide suitable alternatives.
Reviewed-by: Thomas Huth <thuth@redhat.com>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
- get rid of legacy_s390_alloc() and phys_mem_set_alloc()
- tcg: implement the MVPG condition-code-option bit
- fix g_autofree variable handing in the pci vfio code
- use official z15 names in the cpu model definitions
-----BEGIN PGP SIGNATURE-----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=8eNE
-----END PGP SIGNATURE-----
Merge remote-tracking branch 'remotes/cohuck-gitlab/tags/s390x-20210316' into staging
s390x updates:
- get rid of legacy_s390_alloc() and phys_mem_set_alloc()
- tcg: implement the MVPG condition-code-option bit
- fix g_autofree variable handing in the pci vfio code
- use official z15 names in the cpu model definitions
# gpg: Signature made Tue 16 Mar 2021 10:04:21 GMT
# gpg: using RSA key C3D0D66DC3624FF6A8C018CEDECF6B93C6F02FAF
# gpg: issuer "cohuck@redhat.com"
# gpg: Good signature from "Cornelia Huck <conny@cornelia-huck.de>" [unknown]
# gpg: aka "Cornelia Huck <huckc@linux.vnet.ibm.com>" [full]
# gpg: aka "Cornelia Huck <cornelia.huck@de.ibm.com>" [full]
# gpg: aka "Cornelia Huck <cohuck@kernel.org>" [unknown]
# gpg: aka "Cornelia Huck <cohuck@redhat.com>" [unknown]
# Primary key fingerprint: C3D0 D66D C362 4FF6 A8C0 18CE DECF 6B93 C6F0 2FAF
* remotes/cohuck-gitlab/tags/s390x-20210316:
s390x/pci: Add missing initialization for g_autofree variables
target/s390x: Store r1/r2 for page-translation exceptions during MVPG
target/s390x: Implement the MVPG condition-code-option bit
s390x/cpu_model: use official name for 8562
exec: Get rid of phys_mem_set_alloc()
s390x/kvm: Get rid of legacy_s390_alloc()
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>