If the 51 most significant bits of the SCCB address are zero or equal to
the prefix, we should throw an specification exception, too.
Also moved the check for privileged mode to sclp_service_call() to have
all program checks in one place now.
Signed-off-by: Thomas Huth <thuth@linux.vnet.ibm.com>
Reviewed-by: Cornelia Huck <cornelia.huck@de.ibm.com>
Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com>
The pointer to the SCCB should not be limited to 32 bits only.
In contrast to this, the command word parameter is only 32 bits
(the upper 32 bits should be ignored).
Signed-off-by: Thomas Huth <thuth@linux.vnet.ibm.com>
Reviewed-by: Cornelia Huck <cornelia.huck@de.ibm.com>
Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com>
As a followup to commit 5f04c14a10
(s390-sclp: Define New SCLP Codes) we should mask the sclp command
not only in base sclp, but also in the event facility.
Based on an initial patch from Ralf Hoppe.
Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com>
So far, the DIAG 500 hypervisor call was only setting -EINVAL in
R2 when a guest tried to call this function with an illegal subcode.
This patch now changes the behavior so that a specification exception
is thrown instead, since this is the common behavior of other DIAG
functions (and other CPU instructions) when being called with illegal
parameters.
Signed-off-by: Thomas Huth <thuth@linux.vnet.ibm.com>
Reviewed-by: Cornelia Huck <cornelia.huck@de.ibm.com>
Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com>
The handler for diag 500 did not check whether the requested function
was in the supported range, so illegal values could crash QEMU in the
worst case.
Signed-off-by: Thomas Huth <thuth@linux.vnet.ibm.com>
Reviewed-by: Cornelia Huck <cornelia.huck@de.ibm.com>
Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com>
CC: qemu-stable@nongnu.org
This patch implements a floating-interrupt controller device (flic)
which interacts with the s390 flic kvm_device.
Signed-off-by: Jens Freimann <jfrei@linux.vnet.ibm.com>
Reviewed-by: Cornelia Huck <cornelia.huck@de.ibm.com>
Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com>
Add an sclp event for "cpu was hot plugged". This allows Qemu to deliver an
SCLP interrupt to the guest stating that the requested cpu hotplug was
completed.
Signed-off-by: Jason J. Herne <jjherne@us.ibm.com>
Reviewed-by: Andreas Färber <afaerber@suse.de>
Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com>
Implement the CPU data in SCLP "Read SCP Info". And implement "Read CPU Info"
SCLP command. This data will be used by the guest to get information about hot
plugged cpus.
Signed-off-by: Jason J. Herne <jjherne@us.ibm.com>
Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com>
Define new SCLP codes to improve code readability.
Signed-off-by: Jason J. Herne <jjherne@us.ibm.com>
Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com>
This includes some Preparatory patches for cpu hotplug for q25 and memory
hotplug by Igor, tests and memory mapping change
by Laszlo and pci reset cleanup by Paolo.
There are also some fixes for fedora and virtio:
included here since they are test blockers for me.
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1.4.15 (GNU/Linux)
iQEcBAABAgAGBQJSuF+2AAoJECgfDbjSjVRpTz0IAJhNCC8L2GVt+pm1RAt6lbqZ
u9bCrqfThDORN2mUTEuLu4ZpZC0DYc7d0Jjr5NPesC5G/Afzi5/to6+l7nNZneU3
OdBPglXCCfU/cRaLu7JG2akpha0GVU0tsSCoWIYa6mwlWA4/DXVMgeKg/bh/EgfM
B1w4fE2RgRM9bEqWmX4+tZw8dgk7uVJhu95HCDnb5eikaKlFzwuOlvexrDV3KbPc
bkJe35zbGrKOws93tiSeoqcDx2dcYSzecPoJ0jiCY0KXJ17PBWAvuLTtYqkwwe9J
2FEnTslQJ3Rc8jTFiOPWx2pGaejG4y7Tnk6uuzW6fbbSLOQDPJy3KgmutJFMt1A=
=ShCj
-----END PGP SIGNATURE-----
Merge remote-tracking branch 'mst/tags/for_anthony' into staging
acpi,pci,pc,fedora,virtio fixes and enhancements
This includes some Preparatory patches for cpu hotplug for q25 and memory
hotplug by Igor, tests and memory mapping change
by Laszlo and pci reset cleanup by Paolo.
There are also some fixes for fedora and virtio:
included here since they are test blockers for me.
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
# gpg: Signature made Mon 23 Dec 2013 08:07:18 AM PST using RSA key ID D28D5469
# gpg: Can't check signature: public key not found
* mst/tags/for_anthony:
target-arm: fix build with gcc 4.8.2
virtio: add back call to virtio_bus_device_unplugged
piix: fix 32bit pci hole
qdev: switch reset to post-order
qdev: allow both pre- and post-order vists in qdev walking functions
pci: clean up resetting of IRQs
pci: do not export pci_bus_reset
ACPI/DSDT-CPU: cleanup bogus comment
ACPI: Q35 DSDT: fix CPU hotplug GPE0.2 handler
acpi: ich9: allow guest to clear SCI rised by GPE
acpi: factor out common pm_update_sci() into acpi core
acpi: piix4: remove not needed GPE0 mask
i440fx-test: verify firmware under 4G and 1M, both -bios and -pflash
i440fx-test: generate temporary firmware blob
i440fx-test: give each GTest case its own qtest
i440fx-test: qtest_start() should be paired with qtest_end()
hw/i386/pc_sysfw: support two flash drives
pc_piix: document gigabyte_align
piix: gigabyte alignment for ram
Message-id: 1387815007-1272-1-git-send-email-mst@redhat.com
Signed-off-by: Anthony Liguori <aliguori@amazon.com>
Post-order is the only sensible direction for the reset signals.
For example, suppose pre-order is used and the parent has some data
structures that cache children state (for example a list of active
requests). When the reset method is invoked on the parent, these caches
could be in any state.
If post-order is used, on the other hand, these will be in a known state
when the reset method is invoked on the parent.
This change means that it is no longer possible to block the visit of
the devices, so the callback is changed to return void. This is not
a problem, because PCI was returning 1 exactly in order to achieve the
same ordering that this patch implements.
PCI can then rely on the qdev core having sent a "reset signal" (whatever
that means) to the device, and only do the PCI-specific initialization
with pci_do_device_reset.
MST: fixed up virtio-ccw
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
device_add plugs devices into suitable bus. For "real" buses, that
actually connects the device. For sysbus, the connections need to be
made separately, and device_add can't do that. The device would be
left unconnected, and could not possibly work.
Quite a few, but not all sysbus devices already set
cannot_instantiate_with_device_add_yet in their class init function.
Set it in their abstract base's class init function
sysbus_device_class_init(), and remove the now redundant assignments
from device class init functions.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Marcel Apfelbaum <marcel.a@redhat.com>
Signed-off-by: Andreas Färber <afaerber@suse.de>
In an ideal world, machines can be built by wiring devices together
with configuration, not code. Unfortunately, that's not the world we
live in right now. We still have quite a few devices that need to be
wired up by code. If you try to device_add such a device, it'll fail
in sometimes mysterious ways. If you're lucky, you get an
unmysterious immediate crash.
To protect users from such badness, DeviceClass member no_user used to
make device models unavailable with -device / device_add, but that
regressed in commit 18b6dad. The device model is still omitted from
help, but is available anyway.
Attempts to fix the regression have been rejected with the argument
that the purpose of no_user isn't clear, and it's prone to misuse.
This commit clarifies no_user's purpose. Anthony suggested to rename
it cannot_instantiate_with_device_add_yet_due_to_internal_bugs, which
I shorten somewhat to keep checkpatch happy. While there, make it
bool.
Every use of cannot_instantiate_with_device_add_yet gets a FIXME
comment asking for rationale. The next few commits will clean them
all up, either by providing a rationale, or by getting rid of the use.
With that done, the regression fix is hopefully acceptable.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Marcel Apfelbaum <marcel.a@redhat.com>
Signed-off-by: Andreas Färber <afaerber@suse.de>
The vdev field is complicated to synchronize. Just access the
BusState's list of children.
Cc: qemu-stable@nongnu.org
Reviewed-by: Cornelia Huck <cornelia.huck@de.ibm.com>
Acked-by: Andreas Faerber <afaerber@suse.de>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Similar to the PCI bug that prompted these patches, virtio-ccw will
segfault after the reworking of hotplug/hot-unplug. Prepare for
this by moving virtio_ccw_stop_ioeventfd to before the freeing
of the proxy device.
A better place for this could be the device_unplugged callback
for the virtio-ccw bus. However, we do not yet have a callback
that works: this patch avoids the problem while leaving the tree
bisectable.
Cc: qemu-stable@nongnu.org
Reported-by: Cornelia Huck <cornelia.huck@de.ibm.com>
Suggested-by: Cornelia Huck <cornelia.huck@de.ibm.com>
Reviewed-by: Cornelia Huck <cornelia.huck@de.ibm.com>
Acked-by: Andreas Faerber <afaerber@suse.de>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
pc-bios/s390-zipl.rom is a flat image so it's expected that
loading it as elf will fail.
It should fall back on loading a flat file, but doesn't
on 32 bit systems, instead it fails printing:
qemu: hardware error: could not load bootloader 's390-zipl.rom'
The result is boot failure.
The reason is that a 64 bit unsigned interger which is set
to -1 on error is compared to -1UL which on a 32 bit system
with gcc is a 32 bit unsigned interger.
Since both are unsigned, no sign extension takes place and
comparison evaluates to non-equal.
There's no reason to do clever tricks: all functions
we call actually return int so just use int.
And then we can use == -1 everywhere, consistently.
Reviewed-by: Alexander Graf <agraf@suse.de>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Message-id: 20131121133426.GA30827@redhat.com
Signed-off-by: Anthony Liguori <aliguori@amazon.com>
The qdev_free() function name is misleading since all the function does
is unlink the device from its parent. The device is not necessarily
freed.
The device will be freed when its QObject refcount reaches zero. It is
usual for the parent (bus) to hold the final reference but there are
cases where something else holds a reference so "free" is a misleading
name.
Call object_unparent(obj) directly instead of having a qdev wrapper
function.
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Signed-off-by: Andreas Färber <afaerber@suse.de>
Currently all handlers (quiesce, console) only handle one event type.
Some drivers will handle multiple (compatible) event types. Rework the
code accordingly.
Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com>
Reviewed-by: Alexander Graf <agraf@suse.de>
The event_type variable is never used. Get rid of it.
Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com>
Reviewed-by: Alexander Graf <agraf@suse.de>
Make the handler for SCLP Read Event Data deal with notifications
for multiple sources correctly.
Signed-off-by: Ralf Hoppe <rhoppe@de.ibm.com>
Reviewed-by: Thomas Huth <thuth@linux.vnet.ibm.com>
Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com>
[split bigger patch into smaller independent chunks]
Reviewed-by: Alexander Graf <agraf@suse.de>
Add reset() functions for event-facility, sclpconsole, and sclpquiesce.
The reset() functions perform variable initialization
at IPL and e.g. when monitor system_reset is called.
Signed-off-by: Heinz Graalfs <graalfs@linux.vnet.ibm.com>
Reviewed-by: Thomas Huth <thuth@linux.vnet.ibm.com>
Reviewed-by: Alexander Graf <agraf@suse.de>
Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com>
This patch adds the necessary life migration pieces to sclpquiesce
by using the vmstate_register.
Signed-off-by: Heinz Graalfs <graalfs@linux.vnet.ibm.com>
Reviewed-by: Alexander Graf <agraf@suse.de>
Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com>
# By Stefan Weil (6) and others
# Via Michael Tokarev
* mjt/trivial-patches:
aio / timers: use g_usleep() not sleep()
adlib: sort offsets in portio registration
qmp: fix integer usage in examples
tci: Remove function tcg_out64 (fix broken build)
target-arm: Report unimplemented opcodes (LOG_UNIMP)
pflash_cfi02.c: fix debug macro
configure: Remove unneeded redirections of stderr (pkg-config --exists)
configure: Remove unneeded redirections of stderr (pkg-config --cflags, --libs)
configure: Don't write .pyc files by default (python -B)
curl: qemu_bh_new() can never return NULL
slirp/arp_table.c: Avoid shifting into sign bit of signed integers
configure: disable clang -Wstring-plus-int warning
rdma: silly ipv6 bugfix
misc: Fix some typos in names and comments
slirp: Port redirection option behave differently on Linux and Windows
Message-id: 1378119695-14568-1-git-send-email-mjt@msgid.tls.msk.ru
Signed-off-by: Anthony Liguori <anthony@codemonkey.ws>
This includes pc and pci cleanups and enhancements,
and a virtio bugfix for level interrupts.
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1.4.14 (GNU/Linux)
iQEcBAABAgAGBQJSIveoAAoJECgfDbjSjVRp2C8IAL7DE0oM0jfEB5DAd8jlULHx
hA8RP21rFzyU8PwtHB+72+C1ImldBge4hvhI+qbsm6PoW3RCeV/lbESIRTiv8dCO
pGUOFmv8MfJAH+WWFsle5mRisoTksYQWWBMHCOqvmaY4JL9pBQOhCLHVhV1XfjtL
hO7uGrWmlijeILv5CxYyPMYuOEdVvRSZKzE+Fp2YKfNstiQrS5fJIlqmwCHrlneW
l2atnt2d9ZV1K8QYiGg4GRVbSAMJvA1wum+0F4gnXIz9yAeOt+Ht1s8cNKQDMouJ
r2OyVgPM9aS/XaO6ejct1Sjo7Vgh/Ublrpw3lFqV/qHix6rEHwy2I3JHFEJPjvk=
=SytJ
-----END PGP SIGNATURE-----
Merge remote-tracking branch 'mst/tags/for_anthony' into staging
pc,pci,virtio fixes and cleanups
This includes pc and pci cleanups and enhancements,
and a virtio bugfix for level interrupts.
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
# gpg: Signature made Sun 01 Sep 2013 03:15:36 AM CDT using RSA key ID D28D5469
# gpg: Can't check signature: public key not found
# By Michael S. Tsirkin (3) and others
# Via Michael S. Tsirkin
* mst/tags/for_anthony:
virtio_pci: fix level interrupts with irqfd
pc: reduce duplication, fix PIIX descriptions
hw: Clean up bogus default boot order
pci: add config space access traces
pc: fix regression for 64 bit PCI memory
pci: Introduce helper to retrieve a PCI device's DMA address space
Message-id: 1378023590-11109-1-git-send-email-mst@redhat.com
Signed-off-by: Anthony Liguori <anthony@codemonkey.ws>
Most typos were found using a modified version of codespell:
accross -> across
issueing -> issuing
TICNT_THRESHHOLD -> TICNT_THRESHOLD
bandwith -> bandwidth
VCARD_7816_PROPIETARY -> VCARD_7816_PROPRIETARY
occured -> occurred
gaurantee -> guarantee
sofware -> software
Signed-off-by: Stefan Weil <sw@weilnetz.de>
Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
To be passed on to object_initialize_with_type().
Acked-by: Cornelia Huck <cornelia.huck@de.ibm.com> (virtio-ccw)
Signed-off-by: Andreas Färber <afaerber@suse.de>
To be passed to object_initialize().
Since commit 39355c3826 the argument is
void*, so drop some superfluous (BusState *) casts or direct parent
field usages.
Signed-off-by: Andreas Färber <afaerber@suse.de>
To be passed to qbus_create_inplace().
Reviewed-by: Wenchao Xia <xiawenc@linux.vnet.ibm.com>
Acked-by: Cornelia Huck <cornelia.huck@de.ibm.com>
Signed-off-by: Andreas Färber <afaerber@suse.de>
There's no need to cast the first argument of object_initialize()
to Object. Remove these unnecessary casts.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Andreas Färber <afaerber@suse.de>
Provide a function that resets the I/O subsystem.
Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com>
Acked-by: Alexander Graf <agraf@suse.de>
We set default boot order "cad" in every single machine definition
except "pseries" and "moxiesim", even though very few boards actually
care for boot order, and "cad" makes sense for even fewer.
Machines that care:
* pc and its variants
Accept up to three letters 'a', 'b' (undocumented alias for 'a'),
'c', 'd' and 'n'. Reject all others (fatal with -boot).
* nseries (n800, n810)
Check whether order starts with 'n'. Silently ignored otherwise.
* prep, g3beige, mac99
Extract the first character the machine understands (subset of
'a'..'f'). Silently ignored otherwise.
* spapr
Accept an arbitrary string (vl.c restricts it to contain only
'a'..'p', no duplicates).
* sun4[mdc]
Use the first character. Silently ignored otherwise.
Strip characters these machines ignore from their default boot order.
For all other machines, remove the unused default boot order
alltogether.
Note that my rename of QEMUMachine member boot_order to
default_boot_order and QEMUMachineInitArgs member boot_device to
boot_order has a welcome side effect: it makes every use of boot
orders visible in this patch, for easy review.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Laszlo Ersek <lersek@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
'dprintf' is the name of a POSIX standard function so we should not be
stealing it for our debug macro. Rename to 'DPRINTF' (in line with
a number of other source files.)
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Andreas Färber <afaerber@suse.de>
Reviewed-by: MORITA Kazutaka <morita.kazutaka@lab.ntt.co.jp>
Acked-by: Richard Henderson <rth@twiddle.net>
Acked-by: Kevin Wolf <kwolf@redhat.com>
Message-id: 1375100199-13934-3-git-send-email-peter.maydell@linaro.org
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
The latest ipl code adaptions collided with some of the virtio
refactoring rework. This resulted in always booting the first
disk. Let's fix booting from a given ID.
The new code also checks for command lines without bootindex to
avoid random behaviour when accessing dev_st (==0).
Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com>
Reviewed-by: Andreas Färber <afaerber@suse.de>
Signed-off-by: Alexander Graf <agraf@suse.de>
event_notifier_get_fd() is not available on windows hosts. Fix this by
moving the calls to event_notifier_get_fd() to the kvm code.
Reported-by: Stefan Weil <sw@weilnetz.de>
Reviewed-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Cornelia Huck <cornelia.huck@de.ibm.com>
Guest and host notifiers are needed by vhost. We use ioeventfds for
the guest notifiers, but need to fall back on qemu injecting interrupts
for the host notifiers.
Signed-off-by: Cornelia Huck <cornelia.huck@de.ibm.com>
On hosts that support ioeventfd, make use of it for host-to-guest
notifications via diagnose 500.
Signed-off-by: Cornelia Huck <cornelia.huck@de.ibm.com>
On virtio reset we must reset the indicator to avoid stale interrupts,
e.g. after a reset.
Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com>
Cc: qemu-stable@nongnu.org
Signed-off-by: Cornelia Huck <cornelia.huck@de.ibm.com>
'default_backend' isn't always set, but 'rng' is, so use that.
$ ./x86_64-softmmu/qemu-system-x86_64 -object rng-random,id=rng0,filename=/dev/random -device virtio-rng-pci,rng=rng0
Segmentation fault (core dumped)
Regressed with virtio refactoring in 59ccd20a9a
CC: qemu-stable@nongnu.org
Signed-off-by: Cole Robinson <crobinso@redhat.com>
Acked-by: Amit Shah <amit.shah@redhat.com>
Acked-by: Michael S. Tsirkin <mst@redhat.com>
Tested-by: Michael Roth <mdroth@linux.vnet.ibm.com>
Message-id: bf4505014a0a941dbd3c62068f3cf2c496b69e6a.1370023944.git.crobinso@redhat.com
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
Interpretation of the ccws to register (configuration) indicators contained
a thinko: We want to disallow reading from 0, but setting the indicator
pointer to 0 is fine.
Let's fix the handling for CCW_CMD_SET{,_CONF}_IND.
Cc: qemu-stable@nongnu.org
Signed-off-by: Cornelia Huck <cornelia.huck@de.ibm.com>
Fix an off-by-one error when indicating availablity of concurrent
sense data.
Cc: qemu-stable@nongnu.org
Signed-off-by: Cornelia Huck <cornelia.huck@de.ibm.com>
This forwards the name and the type of virtio-net-x to fix the bad
behaviour of "info network" command.
Signed-off-by: KONRAD Frederic <fred.konrad@greensocs.com>
Message-id: 1368619970-23892-3-git-send-email-fred.konrad@greensocs.com
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
If no kernel IPL entry is specified, boot the bios and pass if available
device information for the first boot device (as given by the boot index).
The provided information will be used in the next commit from the BIOS.
Signed-off-by: Dominik Dingel <dingel@linux.vnet.ibm.com>
Signed-off-by: Alexander Graf <agraf@suse.de>
There is no use in have this splitted in two functions.
Signed-off-by: Dominik Dingel <dingel@linux.vnet.ibm.com>
Signed-off-by: Alexander Graf <agraf@suse.de>
Add a check if the BIOS blob exists before trying to load.
Signed-off-by: Dominik Dingel <dingel@linux.vnet.ibm.com>
Signed-off-by: Alexander Graf <agraf@suse.de>
The bus name is wrong since the refactoring.
This keeps the behaviour of the command line.
Signed-off-by: KONRAD Frederic <fred.konrad@greensocs.com>
Tested-by: Cornelia Huck <cornelia.huck@de.ibm.com>
Message-id: 1367330931-12994-6-git-send-email-fred.konrad@greensocs.com
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
The bus name is wrong since the refactoring.
This keeps the behaviour of the command line.
Signed-off-by: KONRAD Frederic <fred.konrad@greensocs.com>
Tested-by: Cornelia Huck <cornelia.huck@de.ibm.com>
Message-id: 1367330931-12994-5-git-send-email-fred.konrad@greensocs.com
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
When the proxy id is set, this bus takes the name "id.0" which is expected
to be the virtio-device's first bus.
So force this name to "virtio-bus" as it is an internal bus.
Signed-off-by: KONRAD Frederic <fred.konrad@greensocs.com>
Tested-by: Cornelia Huck <cornelia.huck@de.ibm.com>
Message-id: 1367330931-12994-2-git-send-email-fred.konrad@greensocs.com
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
I don't see any reason why these properties are missing.
Signed-off-by: KONRAD Frederic <fred.konrad@greensocs.com>
Note: Need to apply virtio-rng-refactoring first!
Acked-by: Cornelia Huck <cornelia.huck@de.ibm.com>
Signed-off-by: Alexander Graf <agraf@suse.de>
Since we now have working firmware for s390-ccw in the tree, we can
default to it on our s390-ccw machine, rendering it more useful.
Signed-off-by: Alexander Graf <agraf@suse.de>
We have a virtio-s390 and a virtio-ccw machine in QEMU. Both use vastly
different ways to do I/O. Having the same firmware blob for both doesn't
really make any sense.
Instead, let's parametrize the firmware file name, so that we can have
different blobs for different machines.
Signed-off-by: Alexander Graf <agraf@suse.de>
Our firmware blob is always a raw file that we load at a fixed address today.
Support loading an ELF blob instead that we can map high up in memory.
This way we don't have to be so conscious about size constraints.
Signed-off-by: Alexander Graf <agraf@suse.de>
We can have different load addresses for different blobs we boot with.
Make the reset IP dynamic, so that we can handle things more flexibly.
Signed-off-by: Alexander Graf <agraf@suse.de>
If a guest neglected to register (secondary) indicators but still runs
with notifications enabled, we might end up writing to guest zero;
avoid this by checking for valid indicators and only writing to the
guest and generating an interrupt if indicators have been setup.
Cc: qemu-stable@nongnu.org
Signed-off-by: Cornelia Huck <cornelia.huck@de.ibm.com>
This remove virtio-bindings, and use class instead.
Signed-off-by: KONRAD Frederic <fred.konrad@greensocs.com>
Message-id: 1366791683-5350-6-git-send-email-fred.konrad@greensocs.com
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
This remove the function pointer in VirtIODevice, and use only
VirtioDeviceClass function pointer.
Signed-off-by: KONRAD Frederic <fred.konrad@greensocs.com>
Message-id: 1366791683-5350-5-git-send-email-fred.konrad@greensocs.com
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
virtio_x_bus_new are only used in file scope.
So this make them static.
Signed-off-by: KONRAD Frederic <fred.konrad@greensocs.com>
Message-id: 1366791683-5350-3-git-send-email-fred.konrad@greensocs.com
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
Here the virtio-rng-ccw is modified for the new API. The device
virtio-rng-pci extends virtio-pci. It creates and connects a virtio-rng-device
during the init. The properties are not changed.
Signed-off-by: KONRAD Frederic <fred.konrad@greensocs.com>
Tested-by: Cornelia Huck <cornelia.huck@de.ibm.com>
Acked-by: Amit Shah <amit.shah@redhat.com>
Message-id: 1366790881-3026-6-git-send-email-fred.konrad@greensocs.com
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
Here the virtio-rng-s390 is modified for the new API. The device
virtio-rng-s390 extends virtio-s390-device as before. It creates and
connects a virtio-rng during the init. The properties are not modified.
Signed-off-by: KONRAD Frederic <fred.konrad@greensocs.com>
Tested-by: Cornelia Huck <cornelia.huck@de.ibm.com>
Acked-by: Amit Shah <amit.shah@redhat.com>
Message-id: 1366790881-3026-5-git-send-email-fred.konrad@greensocs.com
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
Create virtio-rng-device which extends virtio-device, so it can be connected on
virtio-bus.
Signed-off-by: KONRAD Frederic <fred.konrad@greensocs.com>
Tested-by: Cornelia Huck <cornelia.huck@de.ibm.com>
Acked-by: Amit Shah <amit.shah@redhat.com>
Message-id: 1366790881-3026-3-git-send-email-fred.konrad@greensocs.com
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Asias He <asias@redhat.com>
Cc: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Nicholas Bellinger <nab@linux-iscsi.org>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
This patch refactors existing virtio-scsi code into VirtIOSCSICommon
in order to allow virtio_scsi_init_common() to be used by both internal
virtio_scsi_init() and external vhost-scsi-pci code.
Cc: Michael S. Tsirkin <mst@redhat.com>
Cc: Asias He <asias@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Here the virtio-net-ccw is modified for the new API. The device
virtio-net-ccw extends virtio-ccw-device as before. It creates and
connects a virtio-net-device during the init. The properties are not modified.
Signed-off-by: KONRAD Frederic <fred.konrad@greensocs.com>
Tested-by: Cornelia Huck <cornelia.huck@de.ibm.com>
Message-id: 1365690602-22729-6-git-send-email-fred.konrad@greensocs.com
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
Here the virtio-net-s390 is modified for the new API. The device
virtio-net-s390 extends virtio-s390-device as before. It creates and
connects a virtio-net-device during the init. The properties are not modified.
Signed-off-by: KONRAD Frederic <fred.konrad@greensocs.com>
Tested-by: Cornelia Huck <cornelia.huck@de.ibm.com>
Message-id: 1365690602-22729-5-git-send-email-fred.konrad@greensocs.com
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
Create virtio-net-device which extends virtio-device, so it can be connected on
virtio-bus.
Signed-off-by: KONRAD Frederic <fred.konrad@greensocs.com>
Tested-by: Cornelia Huck <cornelia.huck@de.ibm.com>
Message-id: 1365690602-22729-3-git-send-email-fred.konrad@greensocs.com
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
To keep compatibility with the old virtio-balloon-x, add the dynamic properties
to virtio-balloon-pci and virtio-balloon-ccw.
Cc: Luiz Capitulino <lcapitulino@redhat.com>
Signed-off-by: KONRAD Frederic <fred.konrad@greensocs.com>
Message-id: 1365941220-8114-1-git-send-email-fred.konrad@greensocs.com
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
Here the virtio-serial-ccw is modified for the new API. The device
virtio-serial-ccw extends virtio-ccw-device as before. It creates and
connects a virtio-serial during the init. The properties are not modified.
Signed-off-by: KONRAD Frederic <fred.konrad@greensocs.com>
Reviewed-by: Cornelia Huck <cornelia.huck@de.ibm.com>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Tested-by: Cornelia Huck <cornelia.huck@de.ibm.com>
Acked-by: Amit Shah <amit.shah@redhat.com>
Message-id: 1365512016-21944-5-git-send-email-fred.konrad@greensocs.com
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
Here the virtio-serial-s390 is modified for the new API. The device
virtio-serial-s390 extends virtio-s390-device as before. It creates and
connects a virtio-serial during the init. The properties are not
modified.
Signed-off-by: KONRAD Frederic <fred.konrad@greensocs.com>
Reviewed-by: Cornelia Huck <cornelia.huck@de.ibm.com>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Tested-by: Cornelia Huck <cornelia.huck@de.ibm.com>
Acked-by: Amit Shah <amit.shah@redhat.com>
Message-id: 1365512016-21944-4-git-send-email-fred.konrad@greensocs.com
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
Create virtio-serial which extends virtio-device, so it can be connected
on virtio-bus.
Signed-off-by: KONRAD Frederic <fred.konrad@greensocs.com>
Reviewed-by: Cornelia Huck <cornelia.huck@de.ibm.com>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Tested-by: Cornelia Huck <cornelia.huck@de.ibm.com>
Acked-by: Amit Shah <amit.shah@redhat.com>
Message-id: 1365512016-21944-2-git-send-email-fred.konrad@greensocs.com
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
Minor fixes to documentation and code comments.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Many of these should be cleaned up with proper qdev-/QOM-ification.
Right now there are many catch-all headers in include/hw/ARCH depending
on cpu.h, and this makes it necessary to compile these files per-target.
However, fixing this does not belong in these patches.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Here the virtio-balloon-ccw is modified for the new API. The device
virtio-balloon-ccw extends virtio-ccw-device as before. It creates and
connects a virtio-balloon during the init. The properties are not modified.
Signed-off-by: KONRAD Frederic <fred.konrad@greensocs.com>
Reviewed-by: Cornelia Huck <cornelia.huck@de.ibm.com>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Tested-by: Cornelia Huck <cornelia.huck@de.ibm.com>
Message-id: 1364377755-15508-4-git-send-email-fred.konrad@greensocs.com
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
Verify that the virtio-ccw notify hypercall passed a reasonable
value for queue.
Cc: qemu-stable@nongnu.org
Reported-by: Alexander Graf <agraf@suse.de>
Signed-off-by: Cornelia Huck <cornelia.huck@de.ibm.com>
Here the virtio-scsi-ccw is modified for the new API. The device
virtio-scsi-ccw extends virtio-ccw-device as before. It creates and
connects a virtio-scsi during the init. The properties are not modified.
Signed-off-by: KONRAD Frederic <fred.konrad@greensocs.com>
Reviewed-by: Cornelia Huck <cornelia.huck@de.ibm.com>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Tested-by: Cornelia Huck <cornelia.huck@de.ibm.com>
Message-id: 1363875320-7985-8-git-send-email-fred.konrad@greensocs.com
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
Here the virtio-scsi-s390 is modified for the new API. The device
virtio-scsi-s390 extends virtio-s390-device as before. It creates and
connects a virtio-scsi during the init. The properties are not modified.
Signed-off-by: KONRAD Frederic <fred.konrad@greensocs.com>
Reviewed-by: Cornelia Huck <cornelia.huck@de.ibm.com>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Tested-by: Cornelia Huck <cornelia.huck@de.ibm.com>
Message-id: 1363875320-7985-7-git-send-email-fred.konrad@greensocs.com
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
host_features field is part of the transport device. So move all the
host_features related properties into transport device.
Signed-off-by: KONRAD Frederic <fred.konrad@greensocs.com>
Reviewed-by: Cornelia Huck <cornelia.huck@de.ibm.com>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Tested-by: Cornelia Huck <cornelia.huck@de.ibm.com>
Message-id: 1363875320-7985-4-git-send-email-fred.konrad@greensocs.com
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
Now that virtio-ccw and s390-virtio define all common properties
for virtio-blk, we can switch to using the generic
DEFINE_VIRTIO_BLK_PROPERTIES macro.
CC: Alexander Graf <agraf@suse.de>
Signed-off-by: Cornelia Huck <cornelia.huck@de.ibm.com>
There's no reason why we wouldn't want to make the cache mode
configurable.
Acked-by: Alexander Graf <agraf@suse.de>
Signed-off-by: Cornelia Huck <cornelia.huck@de.ibm.com>
Here the virtio-ccw-s390 is modified for the new API. The device
virtio-ccw-s390 extends virtio-ccw-device as before. It creates and
connects a virtio-ccw during the init. The properties are not modified.
Signed-off-by: KONRAD Frederic <fred.konrad@greensocs.com>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Message-id: 1363624648-16906-9-git-send-email-fred.konrad@greensocs.com
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
Here the virtio-blk-s390 is modified for the new API. The device
virtio-blk-s390 extends virtio-s390-device as before. It creates and
connects a virtio-blk during the init. The properties are not modified.
Signed-off-by: KONRAD Frederic <fred.konrad@greensocs.com>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Message-id: 1363624648-16906-8-git-send-email-fred.konrad@greensocs.com
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
This set allow_hotplug for each existing virtio-x-bus, allowing the
refactored devices to be hot pluggable.
Signed-off-by: KONRAD Frederic <fred.konrad@greensocs.com>
Message-id: 1363624648-16906-3-git-send-email-fred.konrad@greensocs.com
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
# By Christian Borntraeger (1) and Cornelia Huck (1)
# Via Cornelia Huck
* cohuck/virtio-ccw-upstr:
virtio-ccw: Wire up virtio-rng.
virtio-ccw: remove qdev_unparent in unplug routing
This patch fixes unplugging a virtio-ccw device. We no
longer need to do that in virtio-ccw since common code does now
proper handling.
Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com>
Signed-off-by: Jens Freimann <jfrei@linux.vnet.ibm.com>
Signed-off-by: Cornelia Huck <cornelia.huck@de.ibm.com>
Both fields are used in VMState, thus need to be moved together.
Explicitly zero them on reset since they were located before
breakpoints.
Pass PowerPCCPU to kvmppc_handle_halt().
Signed-off-by: Andreas Färber <afaerber@suse.de>
* origin/master: (75 commits)
tcg: Don't make exitreq flag a local temporary
Makefile: Add subdir dependency on config-devices-all.mak
make_device_config.sh: Emit dependency file to directory where included
Revert "make_device_config.sh: Fix target path in generated dependency file"
s390/virtio-ccw: remove redundant call to blockdev_mark_auto_del
s390/css: Fix subchannel detection
Allow virtio-net features for legacy s390 virtio bus
s390: virtio-ccw maintainer
s390: simplify kvm cpu init
pseries: Add compatible property to root of device tree
target-ppc: Move CPU aliases out of translate_init.c
target-ppc: Report CPU aliases for QMP
target-ppc: List alias names alongside CPU models
target-ppc: Make host CPU a subclass of the host's CPU model
PPC: xnu kernel expects FLUSH to be cleared on STOP
PPC: Fix dma interrupt
target-ppc: Fix PPC_DUMP_SPR_ACCESS build
target-ppc: Synchronize FPU state with KVM
target-ppc: Add mechanism for synchronizing SPRs with KVM
Save memory allocation in the elf loader
...
blockdev_mark_auto_del is already called in virtio-blk-exit.
Remove the redundant call.
Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com>
Signed-off-by: Jens Freimann <jfrei@linux.vnet.ibm.com>
Signed-off-by: Alexander Graf <agraf@suse.de>
We have to consider the m bit to find the real channel subsystem when
determining the last subchannel.
If we fail to take this into account, removal of a subchannel in
the middle of a big list of devices will stop device detection after
a reboot.
Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com>
Signed-off-by: Jens Freimann <jfrei@linux.vnet.ibm.com>
Reviewed-by: Cornelia Huck <cornelia.huck@de.ibm.com>
Signed-off-by: Alexander Graf <agraf@suse.de>
Enable all virtio-net features for the legacy s390 virtio bus. This also fixes
kernel BUG at /usr/src/packages/BUILD/kernel-default-3.0.58/linux-3.0/drivers/s390/kvm/kvm_virtio.c:121!
Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com>
Cc: qemu-stable@nongnu.org
Signed-off-by: Alexander Graf <agraf@suse.de>
Done with this script:
cd hw
for i in `find . -name '*.h' | sed 's/^..//'`; do
echo '\,^#.*include.*["<]'$i'[">], s,'$i',hw/&,'
done | sed -i -f - `find . -type f`
This is so that paths remain valid as files are moved.
Instead, files in hw/dataplane are referenced with the relative path.
We know they are not going to move to include/, and they are the only
include files that are in subdirectories _and_ move.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
qdev-monitor.c is the only "core qdev" file that is not used in
user-mode emulation, and it does not define anything that is used
by hardware models. Remove it from the hw/ directory and
remove hw/qdev-monitor.h from hw/qdev.h too; this requires
some files to have some new explicitly includes.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
There are two ways to express an interruption subclass:
- As a bitmask, as used in cr6.
- As a number, as used in the I/O interruption word.
Unfortunately, we have treated to I/O interruption word as if it
contained the bitmask as well, which went unnoticed so far as
- (queued-for-next) kvm made the same mistake, and
- Linux guest kernels don't check the isc value in the I/O interruption
word for subchannel interrupts.
Make sure that we treat the I/O interruption word correctly.
Signed-off-by: Cornelia Huck <cornelia.huck@de.ibm.com>
Signed-off-by: Alexander Graf <agraf@suse.de>
Starting a qemu with an sclp console and pressing a key very early
can result in
"qemu-system-s390x: hw/s390x/sclpconsole.c:60: receive_from_chr_layer:
Assertion `scon->iov' failed."
Lets make sure that the init process is finished, since the iov is
allocated after CHR_EVENT_OPENED by also checking for scon->iov.
Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com>
Signed-off-by: Alexander Graf <agraf@suse.de>
This prepares for moving the halted field to CPUState.
Most call sites can already supply S390CPU, for some env becomes unused.
Signed-off-by: Andreas Färber <afaerber@suse.de>
Acked-by: Cornelia Huck <cornelia.huck@de.ibm.com>
Signed-off-by: Alexander Graf <agraf@suse.de>
Despite cautioning that S390CPU is needed for upcoming CPUState
refactorings, commit 5d69c547d9 (s390:
I/O interrupt and machine check injection.) added functions
cpu_inject_io() and cpu_inject_crw_mchk() with CPUS390XState argument,
claiming consistency with cpu_inject_ext().
This complicates making cpu_interrupt() take a CPUState even more and it
required to pass &cpu->env from some S390CPU-aware call sites already,
creating inconsistency elsewhere. Address that.
This also eliminates the need for CPUS390XState in s390_virtio_irq().
Signed-off-by: Andreas Färber <afaerber@suse.de>
Acked-by: Cornelia Huck <cornelia.huck@de.ibm.com>
Signed-off-by: Alexander Graf <agraf@suse.de>
set_bit on indicators doesn't go well on 32 bit targets:
note: expected 'long unsigned int *' but argument is of type 'uint64_t *'
Switch to bit shifts instead.
Signed-off-by: Cornelia Huck <cornelia.huck@de.ibm.com>
[agraf: use 1ULL instead]
Signed-off-by: Alexander Graf <agraf@suse.de>
Changed error codes in the channel subsystem / virtio-ccw code
(-EOPNOTSUPP -> -ENOSYS, -ERESTART -> -EINPROGRESS).
This should hopefully fix building on mingw32.
Signed-off-by: Cornelia Huck <cornelia.huck@de.ibm.com>
Reviewed-by: Stefan Weil <sw@weilnetz.de>
Signed-off-by: Alexander Graf <agraf@suse.de>
Map the I/O interruption code before calling into css.
Signed-off-by: Cornelia Huck <cornelia.huck@de.ibm.com>
Signed-off-by: Alexander Graf <agraf@suse.de>
Add a new machine type, s390-ccw-virtio, making use of the
virtio-ccw transport to present virtio devices as channel
devices.
Signed-off-by: Cornelia Huck <cornelia.huck@de.ibm.com>
Signed-off-by: Alexander Graf <agraf@suse.de>
s390_virtio_bus_find_mem() may return a NULL VirtIOS390Device.
If called with, e.g., args[0] == 0, this leads to a segfault.
Fix this by adding error handling as done for other hypercalls.
Present since baf0b55a9e (Implement
virtio reset).
Signed-off-by: Andreas Färber <afaerber@suse.de>
Signed-off-by: Alexander Graf <agraf@suse.de>
This moves all files only used by s390 system emulation to hw/s390x.
Signed-off-by: Alexander Graf <agraf@suse.de>
Acked-by: Christian Borntraeger <borntraeger@de.ibm.com>
Add a new virtio transport that uses channel commands to perform
virtio operations.
Signed-off-by: Cornelia Huck <cornelia.huck@de.ibm.com>
Signed-off-by: Alexander Graf <agraf@suse.de>
Provide a mechanism for qemu to provide fully virtual subchannels to
the guest.
Signed-off-by: Cornelia Huck <cornelia.huck@de.ibm.com>
Signed-off-by: Alexander Graf <agraf@suse.de>
Allow virtio machines to register for different diag500 function
codes and convert s390-virtio to use it.
Signed-off-by: Cornelia Huck <cornelia.huck@de.ibm.com>
Signed-off-by: Alexander Graf <agraf@suse.de>
Lets move the code to setup IPL for external kernel
or via the zipl rom into a separate file. This allows to
- define a reboot handler, setting up the PSW appropriately
- enhance the boot code to IPL disks that contain a bootmap that
was created with zipl under LPAR or z/VM (future patch)
- reuse that code for several machines (e.g. virtio-ccw and virtio-s390)
- allow different machines to provide different defaults
Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com>
Signed-off-by: Jens Freimann <jfrei@linux.vnet.ibm.com>
[agraf: symbolify initial psw, adjust header file location, fix for QOM]
Signed-off-by: Alexander Graf <agraf@suse.de>
Since 39bffca203 (qdev: register all
types natively through QEMU Object Model), TypeInfo as used in
the common, non-iterative pattern is no longer amended with information
and should therefore be const.
Fix the documented QOM examples:
sed -i 's/static TypeInfo/static const TypeInfo/g' include/qom/object.h
Since frequently the wrong examples are being copied by contributors of
new devices, fix all types in the tree:
sed -i 's/^static TypeInfo/static const TypeInfo/g' */*.c
sed -i 's/^static TypeInfo/static const TypeInfo/g' */*/*.c
This also avoids to piggy-back these changes onto real functional
changes or other refactorings.
Signed-off-by: Andreas Färber <afaerber@suse.de>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
Various header files rely on qemu-char.h including qemu-config.h or
main-loop.h, but they really do not need qemu-char.h at all (particularly
interesting is the case of the block layer!). Clean this up, and also
add missing inclusions of qemu-char.h itself.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Some gcc versions rightly complain about a possibly unitialized rc,
so let's move setting it before the QTAILQ_FOREACH().
Signed-off-by: Cornelia Huck <cornelia.huck@de.ibm.com>
Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com>
Signed-off-by: Jens Freimann <jfrei@linux.vnet.ibm.com>
Signed-off-by: Alexander Graf <agraf@suse.de>
This code adds console support by implementing SCLP's ASCII Console
Data event. This is the same console as LPARs ASCII console or z/VMs
sysascii.
The console can be specified manually with something like
-chardev stdio,id=charconsole0 -device sclpconsole,chardev=charconsole0,id=console0
Newer kernels will autodetect that console and prefer that over virtio
console.
When data is received from the character layer it creates a service
interrupt to trigger a Read Event Data command from the guest that will
pick up the received character byte-stream.
When characters are echo'ed by the linux guest a Write Event Data occurs
which is forwarded by the Event Facility to the console that supports
a corresponding mask value.
Console resizing is not supported.
The character layer byte-stream is buffered using a fixed size iov
buffer.
Signed-off-by: Heinz Graalfs <graalfs@linux.vnet.ibm.com>
Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com>
Signed-off-by: Jens Freimann <jfrei@linux.vnet.ibm.com>
Signed-off-by: Alexander Graf <agraf@suse.de>
This implements the sclp signal quiesce event via the SCLP Event
Facility.
This allows to gracefully shutdown a guest by using system_powerdown
notifiers. It creates a service interrupt that will trigger a
Read Event Data command from the guest. This code will then add an
event that is interpreted by linux guests as ctrl-alt-del.
Signed-off-by: Heinz Graalfs <graalfs@linux.vnet.ibm.com>
Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com>
Signed-off-by: Jens Freimann <jfrei@linux.vnet.ibm.com>
Signed-off-by: Alexander Graf <agraf@suse.de>
Several SCLP features are considered to be events. Those events don't
provide SCLP commands on their own, instead they are all based on
Read Event Data, Write Event Data, Write Event Mask and the service
interrupt. Follow-on patches will provide SCLP's Signal Quiesce (via
system_powerdown) and the ASCII console.
Further down the road the sclp line mode console and configuration
change events (e.g. cpu hotplug) can be implemented.
Signed-off-by: Heinz Graalfs <graalfs@linux.vnet.ibm.com>
Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com>
Signed-off-by: Jens Freimann <jfrei@linux.vnet.ibm.com>
Signed-off-by: Alexander Graf <agraf@suse.de>
This adds a more generic infrastructure for handling Service-Call
requests on s390. Currently we only support a small subset of Read
SCP Info directly in target-s390x. This patch provides the base
infrastructure for supporting more commands and moves Read SCP
Info.
In the future we could add additional commands for hotplug, call
home and event handling.
Signed-off-by: Heinz Graalfs <graalfs@linux.vnet.ibm.com>
Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com>
Signed-off-by: Jens Freimann <jfrei@linux.vnet.ibm.com>
Signed-off-by: Alexander Graf <agraf@suse.de>