No hotplug support, make sure it doesn't happen.
Signed-off-by: Corey Minyard <cminyard@mvista.com>
Reviewed-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
No need to keep explicit_fe_open around if it affects only a
qemu_chr_fe_set_handlers(). Use an additional argument instead.
Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Message-Id: <20161022095318.17775-24-marcandre.lureau@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
This also switches from qemu_chr_add_handlers() to
qemu_chr_fe_set_handlers(). Note that qemu_chr_fe_set_handlers() now
takes the focus when fe_open (qemu_chr_add_handlers() did take the
focus)
Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Message-Id: <20161022095318.17775-16-marcandre.lureau@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Store the property in a CharBackend instead of CharDriverState*. This
also replace systematically chr by chr.chr to access the
CharDriverState*. The following patches will replace it with calls to
qemu_chr_fe CharBackend functions.
Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Message-Id: <20161022095318.17775-12-marcandre.lureau@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Update all qemu_uuid users as well, especially get rid of the duplicated
low level g_strdup_printf, sscanf and snprintf calls with QEMU UUID API.
Since qemu_uuid_parse is quite tangled with qemu_uuid, its switching to
QemuUUID is done here too to keep everything in sync and avoid code
churn.
Signed-off-by: Fam Zheng <famz@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Jeff Cody <jcody@redhat.com>
Message-Id: <1474432046-325-10-git-send-email-famz@redhat.com>
The continue_send() method in ipmi_bmc_extern.c directly
assigns the return value of qemu_chr_fe_write() to the
variable tracking the I/O buffer offset. This ignores the
possibility that the return value could be -1 and so will
cause I/O go backwards on EAGAIN. Fortunately 'outpos' is
unsigned, so can't go negative - it will become MAX_INT
which will cause the loop to stop, and avoid an accidental
out of bounds array access.
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
Message-Id: <1473170165-540-2-git-send-email-berrange@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Instead of scanning IPMI devices from a fwinfo list, allow
the fwinfo to be fetched from the IPMI interface class.
Then the code looking for IPMI fwinfo can scan devices on a
bus and look for ones that implement the IPMI class.
This will let the ACPI scope be defined by the calling
code so the IPMI code doesn't have to know the scope.
Signed-off-by: Corey Minyard <cminyard@mvista.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Commit 57cb38b included qapi/error.h into qemu/osdep.h to get the
Error typedef. Since then, we've moved to include qemu/osdep.h
everywhere. Its file comment explains: "To avoid getting into
possible circular include dependencies, this file should not include
any other QEMU headers, with the exceptions of config-host.h,
compiler.h, os-posix.h and os-win32.h, all of which are doing a
similar job to this file and are under similar constraints."
qapi/error.h doesn't do a similar job, and it doesn't adhere to
similar constraints: it includes qapi-types.h. That's in excess of
100KiB of crap most .c files don't actually need.
Add the typedef to qemu/typedefs.h, and include that instead of
qapi/error.h. Include qapi/error.h in .c files that need it and don't
get it now. Include qapi-types.h in qom/object.h for uint16List.
Update scripts/clean-includes accordingly. Update it further to match
reality: replace config.h by config-target.h, add sysemu/os-posix.h,
sysemu/os-win32.h. Update the list of includes in the qemu/osdep.h
comment quoted above similarly.
This reduces the number of objects depending on qapi/error.h from "all
of them" to less than a third. Unfortunately, the number depending on
qapi-types.h shrinks only a little. More work is needed for that one.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
[Fix compilation without the spice devel packages. - Paolo]
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
This patch adds a couple of variables to manipulate the raw sdr
entries. The const attribute is also removed on init_sdrs. This will
ease the introduction of a sdr loader using a file.
Signed-off-by: Cédric Le Goater <clg@fr.ibm.com>
Acked-by: Corey Minyard <cminyard@mvista.com>
Reviewed-by: Marcel Apfelbaum <marcel@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Currently, the code initializing the sdr table relies on an ending
record with a recid of 0xffff. This patch changes the loop to use the
sdr size as a breaking condition.
Signed-off-by: Cédric Le Goater <clg@fr.ibm.com>
Acked-by: Corey Minyard <cminyard@mvista.com>
Reviewed-by: Marcel Apfelbaum <marcel@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
This patch moves the code section initializing the sdrs in its own
routine to prepare ground for changes in the subsequent patches.
Signed-off-by: Cédric Le Goater <clg@fr.ibm.com>
Acked-by: Corey Minyard <cminyard@mvista.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
This will be useful to define and use properties when the object is
instantiated.
Signed-off-by: Cédric Le Goater <clg@fr.ibm.com>
Acked-by: Corey Minyard <cminyard@mvista.com>
Reviewed-by: Marcel Apfelbaum <marcel@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
The third byte in the response buffer of an IPMI command holds the
error code. In many IPMI command handlers, this byte is updated
directly. This patch adds a helper routine to clarify why this byte is
being used.
Signed-off-by: Cédric Le Goater <clg@fr.ibm.com>
Acked-by: Corey Minyard <cminyard@mvista.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Some IPMI command handlers in the BMC simulator use a macro
IPMI_CHECK_RESERVATION() to check a SDR reservation but the macro
implicitly uses local variables. This patch simply removes it.
Signed-off-by: Cédric Le Goater <clg@fr.ibm.com>
Acked-by: Corey Minyard <cminyard@mvista.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
The IPMI command handlers in the BMC simulator use a macro
IPMI_ADD_RSP_DATA() to push bytes in a response buffer. The macro
hides the fact that it implicitly uses variables local to the handler,
which is misleading.
This patch introduces a simple 'struct RspBuffer' and inlined helper
routines to store byte(s) in a response buffer. rsp_buffer_push()
replaces the macro IPMI_ADD_RSP_DATA() and rsp_buffer_pushmore() is
new helper to push multiple bytes. The latest is used in the command
handlers get_msg() and get_sdr() which are manipulating the buffer
directly.
Signed-off-by: Cédric Le Goater <clg@fr.ibm.com>
Acked-by: Corey Minyard <cminyard@mvista.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Most IPMI command handlers in the BMC simulator start with a call to
the macro IPMI_CHECK_CMD_LEN() which verifies that a minimal number of
arguments expected by the command are indeed available. To achieve
this task, the macro implicitly uses local variables which is
misleading in the code.
This patch adds a 'cmd_len_min' attribute to the struct IPMICmdHandler
defining the minimal number of arguments expected by the command and
moves this check in the global command handler ipmi_sim_handle_command().
To clarify the checks being done on the received command, the patch
introduces a helper ipmi_get_handler().
Signed-off-by: Cédric Le Goater <clg@fr.ibm.com>
Acked-by: Corey Minyard <cminyard@mvista.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Fix a number of off-by-ones, one of them spotted by Coverity.
Signed-off-by: Cédric Le Goater <clg@fr.ibm.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
It was falling through when it should have been a break. Found by
Coverity. The logic could be simplified a bit with a fallthrough,
probably the original thought, but that would be less clear, I think.
Cc: Paolo Bonzini <pbonzini@redhat.com>
Cc: Michael S. Tsirkin <mst@redhat.com>
Cc: Peter Maydell <peter.maydell@linaro.org>
Cc: Shannon Zhao <zhaoshenglong@huawei.com>
Cc: Xiao Guangrong <guangrong.xiao@linux.intel.com>
Cc: Stefan Hajnoczi <stefanha@redhat.com>
Signed-off-by: Corey Minyard <cminyard@mvista.com>
Message-Id: <1452519152-6500-3-git-send-email-minyard@acm.org>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Found by Paolo.
Cc: Paolo Bonzini <pbonzini@redhat.com>
Cc: Michael S. Tsirkin <mst@redhat.com>
Cc: Peter Maydell <peter.maydell@linaro.org>
Cc: Shannon Zhao <zhaoshenglong@huawei.com>
Cc: Xiao Guangrong <guangrong.xiao@linux.intel.com>
Cc: Stefan Hajnoczi <stefanha@redhat.com>
Signed-off-by: Corey Minyard <cminyard@mvista.com>
Message-Id: <1452519152-6500-2-git-send-email-minyard@acm.org>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
This is not necessary and actually causes a hang; it was probably copied
and pasted from KVM code, that is one of the very few places that run
outside iothread lock.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
>From the specs (20.8 Get Device GUID Command), the command needs to
return a GUID (Globally Unique ID), or UUID, that should never change
over the lifetime of the device. qemu_uuid looked like a good
candidate to start with but we could use a specific BMC property also
if needed.
Signed-off-by: Cédric Le Goater <clg@fr.ibm.com>
Acked-by: Corey Minyard <cminyard@mvista.com>
Acked-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
This is a simulator. Just return an unknown cause (0).
Signed-off-by: Cédric Le Goater <clg@fr.ibm.com>
Acked-by: Corey Minyard <cminyard@mvista.com>
Reviewed-by: Greg Kurz <gkurz@linux.vnet.ibm.com>
Acked-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Cédric Le Goater <clg@fr.ibm.com>
Acked-by: Corey Minyard <cminyard@mvista.com>
Reviewed-by: Greg Kurz <gkurz@linux.vnet.ibm.com>
Acked-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Currently, sdr attributes are identified using byte offsets and this
can be a bit confusing.
This patch adds a struct ipmi_sdr_compact conforming to the IPMI specs
and replaces byte offsets with names. It also introduces and uses a
struct ipmi_sdr_header in sections of the code where no assumption is
made on the type of SDR. This leave rooms to potential usage of other
types in the future.
Signed-off-by: Cédric Le Goater <clg@fr.ibm.com>
Acked-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
The IPMI BMC simulator populates the SDR table with a set of initial
SDRs. The length of each SDR is taken from the record itself (byte 4)
which does not include the size of the header. But, the full length
(header + data) is required by the sdr_add_entry() routine.
Signed-off-by: Cédric Le Goater <clg@fr.ibm.com>
Acked-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Cédric Le Goater <clg@fr.ibm.com>
Cc: Greg Kurz <gkurz@linux.vnet.ibm.com>
Acked-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
ARRAY_SIZE() is simple to use and removes the need to pre-define
the size of the command arrays.
Signed-off-by: Cédric Le Goater <clg@fr.ibm.com>
Reviewed-by: Greg Kurz <gkurz@linux.vnet.ibm.com>
Acked-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Each routine using the IPMI_ADD_RSP_DATA, IPMI_CHECK_CMD_LEN or
IPMI_CHECK_RESERVATION macros needs to define a goto label 'out' to
handle hidden errors. Using directly a return statement has the same
effect and it removes the fact that 'out' needs to be defined.
The code exits in ipmi_sim_handle_command() are a little different
from the rest and a "possible" error in the macro IPMI_ADD_RSP_DATA is
handled before making use of it. This might be a bit excessive as a
minimum response len is currently 300 bytes and the patch checks that
at least 3 are available.
Signed-off-by: Cédric Le Goater <clg@fr.ibm.com>
Reviewed-by: Marcel Apfelbaum <marcel@redhat.com>
Reviewed-by: Greg Kurz <gkurz@linux.vnet.ibm.com>
Reviewed-by: Corey Minyard <cminyard@mvista.com>
Acked-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Clean up includes so that osdep.h is included first and headers
which it implies are not included manually.
This commit was created with scripts/clean-includes.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Message-id: 1453832250-766-38-git-send-email-peter.maydell@linaro.org
Replace the int32 softfloat-specific typedef with int32_t.
This change was made with
find hw include fpu target-* -name '*.[ch]' | xargs sed -i -e 's/\bint32\b/int32_t/g'
together with manual removal of the typedef definition, and
manual undoing of some mis-hits where macro arguments were
being used for token pasting rather than as a type.
The uses in hw/ipmi/ should not have been using this type at all.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <rth@twiddle.net>
Reviewed-by: Aurelien Jarno <aurelien@aurel32.net>
Acked-by: Leon Alrae <leon.alrae@imgtec.com>
Acked-by: James Hogan <james.hogan@imgtec.com>
Message-id: 1452603315-27030-4-git-send-email-peter.maydell@linaro.org
Allow the IPMI interface to request a forced power off.
Signed-off-by: Corey Minyard <cminyard@mvista.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Add a way for IPMI devices to register their firmware information
with the IPMI subsystem so that various firmware entities can pull
that information later for adding to firmware tables.
Signed-off-by: Corey Minyard <cminyard@mvista.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
This provides the simulation of the BT hardware interface for
IPMI.
Signed-off-by: Corey Minyard <cminyard@mvista.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
This provides the simulation of the KCS hardware interface.
Signed-off-by: Corey Minyard <cminyard@mvista.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
This adds an interface for IPMI that connects to a remote
BMC over a chardev (generally a TCP socket). The OpenIPMI
lanserv simulator describes this interface, see that for
interface details.
Signed-off-by: Corey Minyard <cminyard@mvista.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
This provides a minimal local BMC, basically enough to comply with the
spec and provide a complete watchdog timer (including a sensor, SDR,
and event).
Signed-off-by: Corey Minyard <cminyard@mvista.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Add the basic IPMI types and infrastructure to QEMU. Low-level
interfaces and simulation interfaces will register with this; it's
kind of the go-between to tie them together.
Signed-off-by: Corey Minyard <cminyard@mvista.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>